BI-METAL BAND SAW BLADES - Kawan Lama2 BI-METAL BAND SAW BLADES BI-METAL TOOTH SELECTION 1. Determine size and shape of material to be cut 2. Identity chart to be used (square solids,

2

BI-METAL BAND SAW BLADES

BI-METAL TOOTH SELECTION1. Determine size and shape of material to be cut2. Identity chart to be used (square solids, round solids or tubing/structural)3. Read teeth per inch next to material use

BUNDLED/STACKEDMATERIALS: To select the proper number of teeth per inch (TPI) for bundled or stacked materials, find the recommended TPI for a single piece and choose one pitch coarser to cut the bundle

WHAT IS MERCURIZATION?This enhanced mechanical design promotes more efficient tooth penetration and chip formation, easily cutting through the work hardened zone.The MERCURIZED symbol denotes any product that can be MERCURIZED.Consult your LENOX Technical Representative to determine if MERCURIZATION will benefit your operation.

3

Width x Thickness TPI

inch mm 0.7/1.0 1.0/1.3 1.4/2.0 2/3 3/4 4/6

1 x .035 27 x 0.90 LX0001332 LX0001333 LX0001334 ¿

1 - 1/4 x .042 34 x 1.07 ¿ 10045562 LX0001335 LX0001358 ¿

1 - 1/2 x .050 41 x 1.27 ¿ LX0001336 10045563 10045564

2 x .063 54 x 1.60 ¿ ¿ ¿ 10197384

2 - 5/8 x .063 67 x 1.60 ¿ ¿ ¿

3 x .063 80 x 1.60 ¿

¿ = Ground tooth

Qxp™Long Blade Life At High Cutting RatesLong life. Fast cutting•Solids of mild to moderate machinability•Proprietary backing steel preparation provides

increased fatigue lifePenetrates with less feed force•Extreme positive rake tooth formIncreased cutting rates•Deep gullet design

Application•Aluminum/Non-Ferrous•Stainless Steels•Bearing Steels•Carbon Steels•Mold Steels•Alloy Steels•Tool Steels

HOT ITEM

Contestor GT®High Performance SawingStraighter cuts on larger, difficult to cut materials•Unique gullet design for increased beam strengthOptimum chip formation in work hardening alloys•Precision ground teeth-smoother tooth face and

gullet surfaces•Patentedspecialsetandtoothprofile•Increased heat and wear resistance•Available as listed below

Application•Mold Steels•Titanium Alloys•Stainless Steels•Nickel-Based Alloys (Inconel®)•Tool Steels


inch mm 0.7/1.0 1.0/1.3 1.4/2.0 2/3 3/4 4/6

1 x .035 27 x 0.90 LX0000369 LX0000370 LX0001127

1 - 1/4 x .042 34 x 1.07 ¿ LX0000550 LX0000112 LX0001130

1 - 1/2 x .050 41 x 1.27 10049414 LX0000373 ¿ ¿

2 x .050 54 x 1.27 ¿ ¿ 10197383 ¿

2 x .063 54 x 1.60 ¿ ¿ ¿ ¿ ¿

2 - 5/8 x .063 67 x 1.60 ¿ ¿ ¿ ¿

3 x .063 80 x 1.60 ¿ ¿ ¿

¿ = Ground tooth

HOT ITEM


inch mm 0.7/1.0 1.0/1.3 1.4/2.0 2/3 3/4 4/6

1 - 1/4 x .042 34 x 1.07 10026743 10026744 ¿

1 - 1/2 x .050 41 x 1.27 ¿ 10100105 10045565

2 x .063 54 x 1.60 ¿ ¿ ¿ ¿

2 - 5/8 x .063 67 x 1.60 ¿ 10197382 ¿

3 x .063 80 x 1.60 ¿ 10197381

¿ = Ground tooth

Contestor XL®HighPerformanceSawingofLarge,DifficulttoCutMetals

HOT ITEM

Increased wear resistance. Delivers longer blade life•New HSS edge wire increases tooth hardness for better abrasive wear resistance•Patent pending chip controlling design reduces heat and wearImproved chip formation helps penetrate difficult to cut metals•Variable tooth heights and multi-level set creates longer, narrower chips•High rake angles reduce cutting forcesOptimized design for straighter cuts on large blocks•Shallow gullet construction increases beam strength

4

BI-METAL BAND SAW BLADES

LXP®Extreme Production RatesFaster cutting of solid materials•Extreme positive rake tooth form for easier penetration•Deep gullets for improved chip carrying capacity with less feed force


inch mm 4/6

3/4 x .035 19 x 0.90 LX0000780


inch mm 2/3 3/4 4/6 5/8 10/14

5/8 x .032 16 x 0.80 Õ

3/4 x .035 19 x 0.90 LX0001925 ¿

1 x .035 27 x 0.90 ¿ LX0001125 LX0001096 LX0001097

1 - 1/4 x .042 34 x 1.07 ¿� LX0001098 LX0001099 ¿

1 - /2 x .050 41 x 1.27 ¿� 10137330 LX0001126� ¿

2 x .050 54 x 1.27 ¿ ¿� ¿ ¿

2 x .063 54 x 1.60 ¿� 10197380 ¿

2 - 5/8 x .063 67 x 1.60 ¿� 10197379 ¿

� = Extra heavy set available to prevent blade pinchingÕ = Matrix edge

Rx®+Engineered to Cut Structurals, Tubing and BundlesLong blade life and extreme durability•Patentedtoothprofileresiststoothstrippage,evenathigherfeedratesQuiet cutting, reduced vibration•Optimized tooth pitch/set sequence

Application•Carbon Steels•Structural Steels

HOT ITEM

Armor Rx®+Engineered for Long LifeAltin coating for productivity and long blade life•Aluminum, Titanium, and Nitrogen combine to form a coating that is hard and

tough, protecting each tooth from heat and wear with an armor-like barrierUnique, patented tooth profile•Special, reinforced tooth design for reduced tooth strippage at higher feed rates•Minimized harmonics and vibrations•Quiet cuttingHigh performance backing steel•For longer fatigue life


inch mm 2/3 3/4 4/6

1 - 1/4 x .042 34 x 1.07 ¿� ¿

1 - /2 x .050 41 x 1.27 10143724 ¿ ¿�

2 x .063 54 x 1.60 ¿ ¿�

� = Extra heavy set available to prevent blade pinching

5

Tooth Form TUFF TOOTH™ VARY TOOTH® WAVY HOOK

Width x Thickness TPI TPI TPI TPI

inch mm 2/3 3/4 4/6 6/8 5/8 6/10 8/12 10/14 14 18 3

3/4 x .035 19 x 0.90 ¿ ¿ LX0000734 LX0001191 LX0000661 LX0000556 ¿ ¿ ¿

1 x .035 27 x 0.90 ¿ ¿ ¿ LX0000363 LX0000082 LX0000549 LX0000088 ¿

1-1/4 x .042 34 x 1.07 ¿ ¿ ¿ LX0000046 LX0001150 10118980

1-1/2 x .050 41 x 1.27 ¿ ¿� ¿ ¿ LX0001246

2 x .050 54 x 1.27 ¿ ¿ ¿ ¿

2 x .063 54 x 1.60 ¿ ¿ ¿


Classic®The Ultimate Multi-Purpose BladeDesigned for Long Life In General Purpose Cutting Applications•Patented Tuff Tooth™ design reduces tooth strippage•M-42 high speed steel edge for excellent heat and

wear resistance

Application•Aluminum/Non-Ferrous •CarbonSteels•AlloySteels •StructuralSteels•StainlessSteels •ToolSteels


inch mm 1.0/1.3 1.4/2.0 2/3 3/4 4/6 5/8

1 x .035 27 x 0.90 ¿ 10049414 10033201 ¿

1 - 1/4 x .042 34 x 1.07 ¿ ¿ 10199185 ¿ ¿

1 - 1/2 x .050 41 x 1.27 ¿ ¿ ¿� ¿ ¿

2 x .050 54 x 1.27 ¿ ¿ ¿

2 x .063 54 x 1.60 ¿ ¿ ¿� ¿� ¿

2 - 5/8 x .063 67 x 1.60 ¿ ¿ ¿� ¿�

3 x .063 80 x 1.60 ¿


Q88+™Next Generation Multi-Purpose BladeNext generation multi-purpose blade for production cutting•Cuts a wide range of metals from low carbon steels to higher strength alloys•Smooth, straight cuts when cutting multiple pieces or wide cross sectionsExceptional blade life•Proprietary ‘q’ process increases fatigue life & minimizes band breaksConsistent performance cut after cut•Advanced tooth geometry and set minimizes noise & vibration from the very 1st cut

Tooth Form VARY TOOTH® STANDARD HOOK

Width x Thickness TPI TPI TPI

inch mm 6/10 8/12 10/14 14/18 10 14 18 24 3 4 6

1/4 x .025 6.4 x 0.64 ¿ ¿ ¿

1/4 x .035 6.4 x 0.90 ¿ ¿

3/8 x .025 9.5 x 0.64 ¿ ¿

3/8 x .035 9.5 x 0.90 ¿ ¿

1/2 x.020 12.7 x 0.50 Õ Õ Õ Õ Õ Õ Õ

1/2 x .025 12.7 x 0.64 LX0000528 LX0000622 LX0000529 ¿ ¿ ¿ ¿ ¿ ¿

1/2 x .035 12.7 x 0.90 ¿ LX0001308 LX0000095

Õ = Matrix edge

Diemaster 2®Engineered for Contour CuttingFaster cutting with M-42 high speed steel tooth edge•Runs at twice the speed of carbon blades for faster,

easier cuttingLonger blade life•Lasts 10 times longer than carbon bladesFor general purpose hand-fed applications•Tool and die shops, machine shops, maintenance

facilities

Application•Aluminum/Non-Ferrous•Carbon Steels•Alloy Steels•Structural Steels•Stainless Steels•Tool Steels•Wood

6

CARBIDE BAND SAW BLADES

CARBIDE PRODUCT SELECTION

CARBIDE TOOTH SELECTION

7

TRI-MASTER®Versatile Carbide Tipped Blade

Precision triple chip grind•Smoothcuts,excellentfinishHigh performance backing steel•Excellent fatigue lifeGeneral purpose blade•Perfect for cutting of a wide variety of materials

Tooth Form VARY TOOTH® Standard

Width x Thickness TPI TPI

inch mm 1.2/1.8 1.5/2.3 2/3 3/4 5/8

3/8 x .032 9.5 x 0.80 � � �

1/2 x .025 12.7 x 0.64 � �

3/4 x .035 19 x 0.90 �

1 x .035 27 x 0.90 10121987 � �

1 - 1/4 x .042 34 x 1.07 � � � �

1 - 1/2 x .050 41 x 1.27 � � � �

2 x .063 54 x 1.60 � �

2 - 5/8 x .063 67 x 1.60 �

3 x .063 80 x 1.60 �


Application•Aluminum/Non-Ferrous •Wood•Nickel-BasedAlloys(Inconel®) •MoldSteels•CarbonSteels •AlloySteels•TitaniumAlloys •ToolSteels•BearingSterels •StainlessSteels

CAST MASTER™Superior Performance when Sawing CastingsExceptional blade life in hand fed foundry applications•Sub-micron grade carbide designed for cutting aluminum and non-ferrous parts•Precision grind on the rake face prevents material build up on the tooth edgeCuts parts freely with limited feed pressure•Optimized rake angle and narrow kerf enable high speed cutting without pulling

the part•Multi-chip tooth design reduces cutting forces and limits vibrationHigh alloy backing steel increases fatigue life•Advanced backing steel preparation minimizes band breaks


inch mm 2 2/3 3 3/4

1/2 x .025 12.7 x 0.64 ¿

3/4 x .035 19 x 0.90 � LX0001912Õ ¿

1 x .035 27 x 0.90 ¿ ¿Õ ¿

1 - 1/4 x .042 34 x 1.07 ¿ ¿ ¿ ¿

1 - 1/2 x .050 41 x 1.27 ¿

¿ = Multi-chip design Õ = Set style (Cast Master SST)

Application•Aluminum/Non-Ferrous•Wood•Castings•Composites•Gates & Risers

MASTER-GRIT®Carbide Grit Edge Blade for Cutting Abrasive and Hardened Materials

Grit Edge PreparationGulleted Continuous

Width x Thickness

inch mm Med Med-Coarse Coarse Med Coarse

1/4 x .020 6.4 x 0.50 � �

3/8 x .025 9.5 x 0.64 � �

1/2 x .025 12.7 x 0.64 � � �

3/4 x .032 19 x 0.80 � �

1 x .035 27 x 0.90 � � � �

1 - 1/4 x .042 34 x 1.07 �

Tungsten carbide particle grit•Metallurgically bonded edgeGulleted•For applications greater than 1/4”(6.4mm) in cross-sectionContinuous•For applications less than 1/4”(6.4mm) in cross-section

Application•Case Hardened MaterialsOther•Fiberglass•Radial Tires•Steel Belted•Composites

8

CARBIDE BAND SAW BLADES

ARMOR® CT BlackFor Extreme Cutting RatesARMOR Coating provides faster cutting and higher productivity•Aluminum, Titanium and Nitrogen (AlTiN) combine to form a tough coating that

protectseach tooth from heat and wear with an armor-like barrierExtends blade life by preventing heat build up•Improved, thicker coating now forces even more heat into the chips, instead ofthe

blade or workpieceHigh performance backing steel with excellent fatigue life•Optimized heat treat and backing steel preparation minimizes premature band

breaksTailored to cut a wide range of metals•High quality, micro grained carbide

Application•Carbon Steels•Mold Steels•Alloy Steels•Tools Steels•Bearing Steels•Titanium Alloys•Stainless Steels•Structural Steels


inch mm 0.9/1.1 1.4/1.6 1.8/2.0 2.5/3.4

1 - 1/4 x .042 34 x 1.07 � � �

1 - 1/2 x .050 41 x 1.27 � � � �

2 x .063 54 x 1.60 � � � �

2 - 5/8 x .063 67 x 1.60 � �

3 x .063 80 x 1.60 �

LENOX HRc®Carbide Tipped Blade for Case and Through-Hardened Materials

Tooth Form VARY TOOTH® Standard

Width x Thickness TPI TPI

inch mm 2/3 3/4 3

1 x .035 27 x 0.90 � �

1 - 1/4 x .042 34 x 1.07 � � �

1 - 1/2 x .050 41 x 1.27 �

2 x .063 54 x 1.60 � �

Tungsten carbide particle grit•Metallurgically bonded edgeGulleted•For applications greater than 1/4”(6.4mm) in cross-sectionContinuous•For applications less than 1/4”(6.4mm) in cross-sectionGeneral purpose blade•Perfect for cutting of a wide variety of materials

Application•Carbon Steels•Stainless Steels•Case Hardened Materials

• TRI-TECH CT™•SetStyleCarbideBladeforDifficulttoCutMetalsStraight cuts. No Pinching.•Set style tooth pattern eliminates pinching in high stress metals•Wide kerf clearance enables plunge cuttingProlonged blade life•Highgradecarbidetipsareprecisiongroundforefficientcutting•High performance backing steel minimizes body breakageExtreme versatility•Cuts a range of materials from high strength steels to Nickel-based

alloys


inch mm 0.6/0.8 0.9/1.1 1.4/1.8 1.8/2.0 2.5/3.4

1 - 1/4 x .042 34 x 1.07 � � �

1 - 1/2 x .050 41 x 1.27 � � � �

2 x .063 54 x 1.60 � � � �

2 - 5/8 x .063 67 x 1.60 � � �

3 x .063 80 x 1.60 � �

Application•Nickel-Based Alloys (Inconel®)•Stainless Steels•Iron Based Super Alloys•Mold & Tool Steels•Titanium Alloys•Aluminum/Non-Ferrous•High Chrome Alloys

9

VERSA PRO™Versatile Carbide Tipped Blade for General Purpose CuttingLong Blade Life In A Variety of Metals•Proprietary grade of tungsten carbide tips with increased toughness

retain a sharp cutting edge•Multi-chip tooth design balances the chip load and reduces the cutting

forcesEasy to Run With No Break In*•Pre-honed cutting edge minimizes tooth chipping and eliminates the

need to break-in the bladeOutstanding Part Finish•Precision ground carbide tips have clean, sharp edges that deliver

smoother parts

Application•Aluminum/Non-Ferrous•Tool Steels•Carbon Steels•Stainless Steels•Bearing Steels•Titanium Alloys•Mold Steels•Nickel-based Alloys•Alloy Steels


inch mm 0.9/1.1 1.0/1.4 1.4/2.0 2/3 3/4

1-1/4 x .042 34 x 1.07 � � �

1 - 1/2 x .050 41 x 1.27 � �

2 x .063 54 x 1.60 � � � �

2 - 5/8 x .063 67 x 1.60 � � �

3 x .063 80 x 1.60 �

HONED TOOTH EDGEPre-honed cutting edge minimizes tooth chipping and eliminates the need to break-in* the blade

*Break-in recommended for pieces larger than 10” (254mm)

MAX CT™Maximum Cutting Performance on Aerospace Alloys


inch mm 2 1.4/1.6 1.8/2.0 2.5/3.4

1 - 1/4 x .042 34 x 1.07 � �

1 - 1/2 x .050 41 x 1.27 � � � �

2 x .063 54 x 1.60 � � � �

2 - 5/8 x .063 67 x 1.60 � �

3 x .063 80 x 1.60 �

Exceptional blade life•Multi-chip tooth pattern balances the chip load and reduces cutting forces•Next generation welding technology prevents premature tooth lossFaster, straighter cuts•Aggressiverakeanglesaidintoothpenetrationindifficulttocutmetals•Optimized gullet geometry increases beam strength for straighter cutsSuperior part finish•Precisiongroundcarbidescreaterazorsharpteethforamirror-likefinishoncutparts

10

WOOD BAND SAW BLADES

Width x Thickness Kerf Tooth Spacing 1/2” 3/4” 7/8” 1” 1-1/4” VARY

TOOTH®

inch mm inch TPI 2 1.3 1.1 1 .78 1.0/1.3

1 x .035 27 x 0.90 0.072 ¿ ¿

1-1/4 x .035 34 x 0.90 0.072 ¿ ¿ ¿

1-1/4 x .042 34 x 1.07 0.080 ¿ ¿ ¿

1-1/2 x .050 41 x 1.27 0.092 ¿

2 x .042 54 x 1.07 0.085 ¿

2 x .050 54 x 1.27 0.090 ¿

2 x .050 54 x 1.27 0.092 ¿

3 x .050 80 x 1.27 0.100 ¿

WOODMASTER®BPrecision Engineered Bi-Metal BladesCuts faster and longer than one-piece carbon steel blades•Two-piece steel construction provides excellent blade lifeIncreased heat and wear resistance•Cobalt rich, high-speed steel tooth tipsIncreased beam strength for longer fatigue life•Durable spring steel backing material•Delivers consistent, reliable performance

WOODMASTER®CCarbon Steel Blades For Reliable PerformanceDelivers straight cuts at high band speeds•Engineered for demanding saw mill and resaw applicationsBlades last longer and wear evenly•One piece carbon steel construction with induction hardened tooth tipsFaster cutting and increased productivity•Improved beam strength for high feed rates

Width x Thickness Kerf Tooth Spacing 1/2” 3/4” 7/8” 1”

inch mm inch TPI 2 1.3 1.1 1

1 x .035 27 x 0.90 0.072 ¿ ¿

1 x .035 27 x 0.90 0.078 ¿ ¿ ¿

1-1/4 x .035 34 x 0.90 0.080 ¿ ¿ ¿

1-1/4 x .042 34 x 1.07 0.085 ¿

1-1/2 x .042 41 x 1.07 0.085 ¿

2 x .035 54 x 0.90 0.090

2 x .045 54 x 1.14 0.091

WOODMASTER®CTCarbide Tipped Blades For Optimum Performance

Width x Thickness Kerf Tooth Spacing 1/2” 3/4” VARY TOOTH®

inch mm inch TPI 2 1.3 07/1

1 - 1/4 x .042 34 x 1.07 0.051 ¿ ¿

1 - 1/2 x .050 41 x 1.27 0.051 ¿

2 x .063 54 x 1.60 0.065 ¿

2 - 5/8 x .063 67 x 1.60 0.072 ¿

3 x .063 80 x 1.60 0.085 ¿

HOT ITEM

Smooth. Precise finish•Precision ground carbide tooth tips deliver the

straightest cutsEngineered for extended life and optimal speed•EffectivelycutsexoticordifficulttomachinewoodIdeal for specialty wood applications•Designedtocutmoulding,hardwoodflooring,wood

siding, paneling and other millwork applicationsExtreme cutting rates. Longer blade life.Maximum productivity

11

LXP Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

LX0000780 LX0000823 BANDSAW LXP 2365X19X4/6T 37615 2365 19 (3/4") 0.9 4/6

DIEMASTER 2 Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

LX0000529 LX0000852 BANDSAW DIEMASTER2 1638X1/2X10/14 23526 1638 12,7 (1/2") 0.64 10/14

LX0000622 LX0001213 BANDSAW DIEMASTER2 1640X1/2X8/12T 23525 1640 12,7 (1/2") 0.64 8/12

LX0000529 LX0000844 BANDSAW DIEMASTER2 1640X1/2X10/14 23526 1640 12,7 (1/2") 0.64 10/14



QXP Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

LX0001334 LX0001590 BANDSAW QXP 2885X27X4/6T 10937 2885 27 (1") 0.9 4/6



10045562 10090288 BANDSAW QXP 3980X34X2/3T 10939 3980 34 (1.1/4") 1.07 2/3

LX0001335 LX0001363 BANDSAW QXP 4115X34X1.07X3/4T 10940 4115 34 (1.1/4") 1.07 3/4

CLASSIC Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

LX0001191 LX0001208 BANDSAW CLASSIC 2360X19X0.9X6/10T 50973 2360 19 (3/4") 0.9 6/10

LX0000661 LX0000802 BANDSAW CLASSIC 2365X19X0.9X8/12T 23532 2365 19 (3/4") 0.9 8/12

LX0000363 LX0000684 BANDSAW CLASSIC 2655X27X0.9X5/8T 50985 2655 27 (1") 0.9 5/8



RX+ Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

LX0001925 LX0001968 BANDSAW RX+ 2360X19X4/6T 55651 2360 19 (3/4") 0.9 4/6

LX0001925 10074559 BANDSAW RX+ 2365X19X4/6T 55651 2365 19 (3/4") 0.9 4/6

LX0001097 LX0001288 BANDSAW RX+ 3035X27X5/8T 55822 3035 27 (1") 0.9 5/8

LX0001099 LX0001119 BANDSAW RX+ 4570X34X4/6T 55655 4570 34 (1.1/4") 1.07 4/6

LX0001098 LX0001197 BANDSAW RX+ 4570X34X3/4T 55588 4570 34 (1.1/4") 1.07 3/4

CONTESTOR Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

LX0001127 LX0001878 BANDSAW CONTSTR 2655X27X4/6T 23492 2655 27 (1") 0.9 4/6

LX0000370 LX0001649 BANDSAW CONTSTR 2665X27X0.9X3/4T 23491 2665 27 (1") 0.9 3/4

LX0000369 10096484 BANDSAW CONTSTR 3505X27X2/3T 23490 3505 27 (1") 0.9 2/3

LX0001127 LX0001373 BANDSAW CONTSTR 3660X27X4/6T 23492 3660 27 (1") 0.9 4/6

LX0000370 LX0000812 BANDSAW CONTSTR 3660X27X0.9X3/4T 23491 3660 27 (1") 0.9 3/4

CONTESTOR GT Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

LX0000550 10100794 BANDSAW CONTSTR GT 3505X34X2/3T 1235544 3505 34 (1.1/4") 1.07 2/3

LX0000550 LX0000592 BANDSAW CONTGT 4570X34X2/3T 23437 4570 34 (1.1/4") 1.07 2/3

LX0000373 LX0001187 BANDSAW CONTSTR GT 4670X41X2/3T 23442 4670 41 (1.1/2") 1.27 2/3

LX0000373 10040770 BANDSAW CONTSTR GT 5450X41X2/3T 23442 5450 41 (1.1/2") 1.27 2/3

CONTESTOR XL Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

10026743 10037057 BANDSAW CONTSTR XL 4115X34X2/3T 1835544 4115 34 (1.1/4") 1.07 2/3

10026744 10042758 BANDSAW CONTSTRXL 4570X34X3/4T 1835544 4570 34 (1.1/4") 1.07 3/4

10100105 10110011 BANDSAW CONTXL 5040X41X1.07X2/3T 1835664 5040 41 (1.1/2") 1.27 2/3

ARMOR RX+ Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

10020523 BANDSAW ARMOR RX+7880X41X1.27X3/4-VP VR 7880 41 (1.5/8") 1.27 3/4

10020522 BANDSAW ARMOR RX+7880X41X1.27X4/6-VP VR 7880 41 (1.5/8") 1.27 4/6

TRIMASTER Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

LX0001760 BANDSAW TRIMSTR 168INX1INX 2/3 T 4268 27 0.9 2/3

LX0000979 BANDSAW TRIMSTR 180X1X2/3T 70631/20008 4572 27 0.9 2/3

WOODMASTER Article No. Component Article No. Material Material Description Length (mm) Width (mm/IN) Thickness (mm) TPI

LX0002094 WOODMASTER C 168INX1INX0.90X1.3T 168 1 0.9 1.3

LX0002009 WOODMASTER B 168INX1.1/4INX1.07X1.3T 168 1.1/4 1.07 1.3

LX0001255 WOODMSTR B 180INX1.1/4INX1.07X1.3T 180 1.1/4 1.07 1.3

LX0001256 WOODMSTR C 180INX1INX0.9X1.3T 180 1 0.9 1.3

POPULAR ITEM

12

Tel. : (021) 582-8282BALITel. : (0361) 907-9320BALIKPAPANTel. : (0542) 763-698BANDUNGTel. : (022) 421-3939BATAMTel. : (0778) 473-566

BONTANGTel. : 0811 581 4591CIKARANGTel. : (021) 8984-5858CILEGONTel. : (0254) 387-987LAMPUNGTel. : (0721) 474-480MAKASARTel. : (0882) 2736-5749

TANJUNG MORAWATel. : (061) 794-1328YOGYAKARTATel. : (0274) 642-9097,98,99

MEDANTel. : (061) 452-7269PALEMBANGTel. : (0711) 571-7788 SAMARINDATel. : (0541) 410-0637SEMARANGTel. : (024) 355-8788SURABAYA (Juanda)Tel. : (031) 868-8328

Kawan Lama Industrial SolutionBALIKPAPANTel. : (0542) 870-3946PEKANBARUTel. : (0761) 282-98

KLS/

P&A.

560/

3K/K

LS.L

ENOX

/YOP

.UNI

/07.1

9

TENSION METERMeasure Band TensionProperly tensioned band saw blades cut straighter, longer.Durable construction: made with lightweight cast aluminum.Easy to use: attach to blade, apply tension and read the PSI

Article no. Article Description

10028707 TENSION METER LENOX 62126

ACCESSORIES

Documents

BI-METAL BAND SAW BLADES - Kawan Lama2 BI-METAL BAND SAW BLADES BI-METAL TOOTH SELECTION 1. Determine size and shape of material to be cut 2. Identity chart to be used (square solids,