Embed Size (px)
Citation preview
7/31/2019 Beam Question
http://slidepdf.com/reader/full/beam-question 1/7
Beam question
Asked By: timothy88 | Asked On: Mar 20th, 2012
A beam carrying two point loads; each point load comprises a beam-end reaction from two of the beams
in part (a). The beam span is 9 meters and the point loads are applied at the third points; i.E. 4m from
each end with a 4m gap between them. No allowance has been made for self-weight. this has to be...
Answer Question
On what level we should fix the topi while fixing the slab centering?
Asked By: Dhananjay B.Tandel | Asked On: Nov 13th, 2011
2 answers
Answered by: prakash on: Mar 14th, 2012
mark on column from benchmark to known level , then minus the depth of beam thickness of suttering,
to clear total height of slab
Answered by: Rohit on: Feb 27th, 2012
Mark a level on a column from benchmark then find out the depth of beam @ column then minus the
slab thickness from it then add a clear floor height minus the level u marked on the column
Answer Question Select Best Answer
What is open graded aggregate?
Asked By: ytdfja | Asked On: Sep 3rd, 2011
1 answer
Answered by: suji on: Mar 7th, 2012
Open graded aggregate is the base of single-sized, angular pieces it is washed to remove fines, stone size
can vary between 3 in to ¼ in. It has Low-settling compaction, void spaces may constitute up...
Answer Question Select Best Answer
Open graded aggregate
Asked By: what is the use of open graded aggregate?? | Asked On: Sep 3rd, 2011
1 answer
For economical purpose we are using open graded aggregate .... How it is economical.... And are there
any problems in using this??
7/31/2019 Beam Question
http://slidepdf.com/reader/full/beam-question 2/7
Answered by: suji on: Mar 7th, 2012
Open graded aggregate provides environmental benefits like ....
1.Noise reduction.
2.Durability for new construction or asphalt overlays.
3.Skid resistance.and also Cost reduction compared to barriers.
Answer Question Select Best Answer
What is soundness of cement?
Asked By: bhavik | Asked On: Nov 15th, 2011
1 answer
Answered by: suji on: Mar 7th, 2012
Soundness of cement is the property of hardened cement paste undergoing large change in volume
after setting without delayed destructive expansion. This destructive expansion is caused by excessive
am...
Answer Question Select Best Answer
What is tmt steel?
Asked By: haris vm | Asked On: Apr 26th, 2011
9 answers
Explain its properties..
Answered by: suji on: Mar 7th, 2012
TMT means Thermomechanical Treatment of steel. It’s a process of simultaneous application of heat
and a deformation process of metal, in order to change its shape and refine the microstructure. Hot...
Answered by: harish on: Dec 3rd, 2011
TMT: Thermo-Mechanicaly Treated Steel
Answer Question Select Best Answer
What is workability in concrete?
Asked By: bhavik | Asked On: Nov 15th, 2011
1 answer
7/31/2019 Beam Question
http://slidepdf.com/reader/full/beam-question 3/7
Answered by: Diptimayee Rath on: Jan 30th, 2012
Workability of concrete is one of the physical parameters of concrete which affects the strength and
durability as well as the cost of labor and appearance of the finished product.
Answered by: vydehi on: Nov 18th, 2011
The ease with which the concrete can be transported,placed,compacted and finished is know as
workability.
Answer Question Select Best Answer
Volumes of wet and dry sand
Asked By: sundeepanu | Asked On: Nov 27th, 2008
3 answers
How to differentiate the volumes of wet and dry sand / soil?
Answered by: dan on: Feb 13th, 2012
The volumes will be the same (based on moleculer density of carbon structure).
Answered by: fouad ellimoney on: Feb 6th, 2012
The volume of wet sand will be more than volume of dry sand but in the case of clay will be the same
Answer Question Select Best Answer
What is responsibility of civil foreman ?
Asked By: Rafique Ahmed | Asked On: Nov 20th, 2011
2 answers
Answered by: DAN on: Feb 13th, 2012
The civil formans job responsibility is to evaluate and direct work to acheive the required end result as
per specifications and to deviate only when directed by project engineer.
Answered by: Diptimayee Rath on: Jan 30th, 2012
Responsibility of a civil foreman is to inspect the work on the site. There are different types of works of a
civil foreman like project evaluation & staff work coordination.
Answer Question Select Best Answer
Sieve analysis
7/31/2019 Beam Question
http://slidepdf.com/reader/full/beam-question 4/7
Asked By: shangcda | Asked On: Mar 24th, 2011
5 answers
What is the most usage of testing sieve analysis of soil
Answered by: Dipti on: Jan 30th, 2012
There are many size of sieves used in this testing of soil so the main thing of the soil test is compactness
testing
Answered by: nath_kai on: Jan 2nd, 2012
sieve analysis is done to know about the different grades in the soil, To make soil compacted and
increasing its bearing capacity.
Answer Question Select Best Answer
Sbc for raft design
Asked By: vinodgeologist | Asked On: Jan 23rd, 2012
Please suggest me sbc(soil bearing capacity) value for raft of 19/40 mm and 40mm and 76mm...The land
contain granite rocks...
Answer Question
Standard size of centering materials
Asked By: senthil | Asked On: Nov 20th, 2011
1 answer
What is the standard size of centering sheet, jack or props, acro span (in open and closed position)?
Answered by: babu on: Jan 23rd, 2012
Centering sheet size=30x20
Props=3m&5m
Span=3m&5m
Answer Question Select Best Answer
M30 strength
Asked By: ramji | Asked On: Nov 23rd, 2011
1 answer
7/31/2019 Beam Question
http://slidepdf.com/reader/full/beam-question 5/7
What is the min and max strength of m30(target strength is 38n/sq.Mm)
Answered by: shafi Uzzama on: Dec 31st, 2011
7 days strength will be 62% i.e. this should be more than 450 KN
& 28 days strength will be 100% i.e. it should be more than 700 KN
Answer Question Select Best Answer
Cube preparation
Asked By: mariappasamy | Asked On: Jul 18th, 2011
3 answers
How many cubes( size 150*150*150)prepare for 1 cum of concrete as per is code
Answered by: RavinderReddy on: Dec 28th, 2011
For every 1cu.m of concrete 3 Cubes are tested
10cu.m-5cubes
25cu.m-10cubes are tested..
Answered by: Vikas Bamal on: Aug 31st, 2011
RCC cube mould size is 150*150*150
3 nos. of cubes fill in 1cu.m concrete
Answer Question Select Best Answer
Rcc - required binding wire
Asked By: Jagdish | Asked On: Nov 24th, 2011
1 answer
(for 1.0mt steel), nails & lubricant (for 1.0 sqm shuttering) in rcc what are the required quantities for: 1.
Binding wire required for 1.000 mt of tmt reinforcement bars. 2. Nails for 1.00 sqm shuttering. 3.
Lubricant/black oil/ deisel/ grease for 1.00 sqm shuttering.
Answered by: Kailalsh chandra sahoo on: Dec 15th, 2011
Up to 16mm dia.-5 to 6 Kg & above 20mm - 8 Kg
Answer Question Select Best Answer
Volumes of wet and dry sand
Asked By: sharphrv | Asked On: Dec 9th, 2008
7/31/2019 Beam Question
http://slidepdf.com/reader/full/beam-question 6/7
3 answers
How to differentiate the volumes of wet and dry sand / soil?
Answered by: Bharath M on: Dec 9th, 2011
25% of Volume will be differ from the both.
Answered by: suresh T on: Feb 4th, 2009
Take a cylinder with marking of measurement fill it with sand up to fixed height then add water full to
complete saturate the sand than measure the volume of sand now take difference in volume of sand...
Answer Question Select Best Answer
High raised building construction
Asked By: khare_sandip | Asked On: May 22nd, 2008
1 answer
Soil density test, bearing capacity of soil?
Answered by: Lokesh M on: Dec 8th, 2011
Surface Crack Detection by Flash Thermography on Concrete Surface,
Using Radio Frequence Identification,
Using Electrically Conductive Materials,
Terrestrial Light Detection and Ranging (LiDAR),
Manual inspection with digital photography,Elevated manual inspections
Answer Question Select Best Answer
How do you test durability of concrete?
Asked By: bhavik | Asked On: Nov 15th, 2011
1 answer
Answered by: Shanthi on: Nov 24th, 2011
Durability of concrete is determined by using compression testing machine
Answer Question Select Best Answer
Hume pipes
Asked By: kiranchiniavar | Asked On: Aug 6th, 2009
7/31/2019 Beam Question
http://slidepdf.com/reader/full/beam-question 7/7
4 answers
What is meant by hume in rcc hume pipes?
Answered by: Patil on: Nov 12th, 2011
what is the meaning of NP3 grade hume pipe?..
Answered by: kalpesh gharat on: Jul 18th, 2011
Hume pipe made with soil and they used in sewage system. generally Hume pipe size is 6inch 8 inch 4
inch.
Answer Question Select Best Answer
For a construction which of the following is preferred - a precast pile or a cast-in-stu pile?
Asked By: sanmathi | Asked On: Oct 9th, 2011
2 answers
Answered by: pavan patchigolla on: Nov 9th, 2011
cast-in-situ piles are better to use because of many advantages like cheap because no transportation is
involved and many other.
Answered by: DB Patra on: Oct 16th, 2011
Cast-in-Stu Pile
