Unit PrintPC2 Quad Cell 24'x36'

MODELNUMBER

APPROX.SHIPPINGWEIGHT

APPROX.OPERATING

WEIGHT

HEAVIESTSECTIONWEIGHT

F H

PC2-1327-2436-40 85,850 119,550 17,010 2'-9 1/4" 18'-0 1/8"PC2-1461-2436-60 86,250 119,950 17,110 2'-9 1/4" 18'-0 1/8"PC2-1562-2436-80 86,370 120,070 17,140 2'-9 1/4" 18'-0 1/8"PC2-1600-2436-60 97,780 132,140 19,990 3'-6 1/2" 18'-9 3/8"PC2-1715-2436-80 97,900 132,260 20,020 3'-6 1/2" 18'-9 3/8"PC2-1804-2436-100 98,900 133,260 20,270 3'-6 1/2" 18'-9 3/8"PC2-1884-2436-120 98,900 133,260 20,270 3'-6 1/2" 18'-9 3/8"PC2-1701-2436-60 109,350 144,370 22,880 4'-3 3/4" 19'-6 5/8"PC2-2004-2436-120 110,470 145,490 23,160 4'-3 3/4" 19'-6 5/8"PC2-1958-2436-100 116,430 151,820 24,650 4'-3 3/4" 19'-6 5/8"PC2-2193-2436-160 116,910 152,300 24,770 4'-3 3/4" 19'-6 5/8"PC2-1920-2436-80 127,560 163,670 27,430 5'-1" 20'-3 7/8"PC2-2120-2436-120 128,560 164,670 27,680 5'-1" 20'-3 7/8"PC2-2277-2436-160 129,040 165,150 27,800 5'-1" 20'-3 7/8"PC2-2402-2436-200 129,280 165,390 27,860 5'-1" 20'-3 7/8"PC2-2506-2436-240 129,680 165,790 27,960 5'-1" 20'-3 7/8"

Notes1) Drawings are not to scale. All dimensions arein feet and inches. Weights are in pounds anddo not include options and accessories.2) Unless otherwise indicated, connections 3"and smaller are MPT. Connections 4" andlarger are grooved to suit a mechanicalcoupling and beveled for welding.3) Dimensions showing location of coilconnections are approximate and should not beused for prefabrication of connecting piping.4) For weight loadings and supportrequirements, refer to the suggested steelsupport drawing.5) The area above the discharge must beunobstructed.6) Piping must not be supported by the unit inletor outlet connections.7) M = Motor location8) Heaviest section is a cell's mechanicalsection mounted to coil casing section.