B Laser-Jet 1512 · 2512 / Faserlaser - Linna Trade · Laser-Jet 1512 · 2512 / Faserlaser ... reinforced steel mm 4 8 10 12 16 20 Stainless steel mm 2456810 Aluminum (AIMg3)

26

B

Laser-Jet 1512 · 2512 / Faserlaser

Made in Germany

Equipped with fiber lasers with various beam powers.

Lowest operating cost due to highest efficiency.

Price 25.000,-

Laser Cutting Systems

Flexible, functional, and space-saving - maximum cutting efficiency

Cutting system with retractable cutting table

High cutting quality, complex contours

• Laser beam is guided in a flexible fiberoptic cable, eliminating the requirement to clean beam travel optics

• Cutting lens is protected by an easy to replace protective glass lens

• Virtually maintenance-free laser operation

• Automatic cutting process guidance, height sensing

• Labeling of cut parts with the same cutter head

• Available with manually retractable cutting table

For more information and quick online quote requests, please visit www.knuth.de

27

Due to the fi ber laser’s shorter wavelength, the

cutting process is performed within a sealed

enclosure. The enclosure automatically closes

upon start of a cutting job and opens at the end

of the cutting operation to allow direct removal of

cut parts.

Laser-Jet Cutting Systems feature a transverse

layout.

Machine bridge runs along the long work surface dimension (X axis) The cutting table does not have to be pulled out of the machine for plate loading and parts unloading. Machine control can be connected to the internet.

This will allow remote control functions and remo-

te diagnostics and monitoring of the system state.

• Laser Cutting Systems with extremely small

foot-print and low machine weight

• Minimum requirements for the setup site

• Very ergonomic handling and easy operation

Ytterbium - Faserlaser FL 150/1500 FL 300/3000 FL 1000 FL 1500 FL 2000 FL 3000

Wavelength μm 1,07 1,07 1,07-1,08 1,07-1,08 1,07-1,08 1,07-1,08 CW beam power, max. W 250 300 1050 1575 2100 3150Pulse peak power W 1500 3000 1000 1500 2000 3000Power stability % ± 0,5 ± 0,5 ± 2 ± 2 ± 2 ± 2CW beam power, min. W 25 30 100 150 200 300Pulse frequency, max. Hz 2500 2500 2000 2000 2000 2000Connected load kW max. 1,1 max. 1,4 max. 3,1 max. 4,7 max. 6,2 max. 9,1

Options Art.-Nr.

• Vacuum and filter system 140 840• Hand-wheel positioning system 250 601• Purge air processing 250 749• CAD-CAM software (grid nesting) 250 752• CAD-CAM software extension 250 753• Y axis extension to 1500 mm 250 959• Refrigerated compressed air dryers 251 090• Digital gas pressure regulator 251 194• Manually retractable cutting table 251 498

Footprint of Laser-Jet 1512 2512

Required fl oor space (1) mm 2400 x 1900 3400 x 1900Minimum work space (2) mm 4000 x 3700 5000 x 3700

Specifications Laser-Jet 1512 2512

Travel - X axis mm 1500 2500Travel - Y axis mm 1250 1250Travel - Y axis extension (optional) mm 1500 1500Travel - Z axis mm 70 70Workpiece support height mm 1000 1000Throat width mm 1850 2850Throat height mm 60 60max. part weight kg/dm2 2,5 2,5Rapid feed m/min 60 60Positioning accuracy mm ± 0,05 ± 0,05Repeatability mm ± 0,05 ± 0,05Machine width mm 2850 3850machine depth mm 2250 2250machine height mm 2000 2000Weight kg 1850 2100System with FL 150/1500 QCW Part No. 140 855 140 857System with FL 300/3000 QCW Part No. 140 856 140 858System with FL 1000 Part No. 140 874 140 875System with FL 1500 Part No. 140 870 140 871System with FL 2000 Part No. 140 872 140 873System with FL 3000 Part No. 140 879 140 876

Cu

ttin

g

Standard Equipment:

Complete system with PC control, Ytterbium fiber laser, fiberoptic cable, high-power cutting head, capacitive height scanner, toggle for cutting gas/cutting pressure, support grid for metal cutting, automatically moving protective enclosure, coolant regenerator, operating and programming instructions


28

B

D.Laser MT 3015 / Faserlaser

Equipped with fi ber lasers with various beam powers.

Lowest operating cost due to highest effi ciency.

Standard Equipment: Complete system including CNC control (Sinumerik 840 D), Ytterbium fiber laser, fiber optic cable, high-power cutting head, capacitive height sensing, laser protection booth, manually pulled out cutting table, small parts and slag conveyor, central lubrication, coolant regenerator, vacuum and filter system, CAD/CAM software, operating and programming instructions

Laser Cutting Systems

Cuts large-size sheet metal plates, delivers superior cut quality and maximizes productivity

• Robust steel machine frame made of welded, annealed steel con-struction for minimal stress

• Massive gantry design absorbs high axis loads and acceleration forces

• Automatic change table system with electric height adjustment (optional) minimizes down-times; table can be loaded and unloaded during the cutting process

• Small parts, residue and slag are transported on a conveyor underneath the cutting table towards the font (operator side of the machine) for quick and easy removal

• Maintenance-free beam guide is provided by a flexible fiberoptic

cable and ensures long life of the laser source

• Laser cutting process takes place within a sealed, laser-safe en-closure, whereby machining can be monitored through a protective glass window

• CNC control based on Sinumerik 840 D with application-specific user interface

• Technology database includes cutting parameters and pre-set cycles for various metals

• CAD/CAM software (METALIX or LANTEK) with various nesting options to ensure optimal use of materials

Options

Automatic changer table system on request


For additional options for these machines, please visit our website at www.knuth.de and search for D.Laser (product search)

More sizes and models are available on request.

29

Cu

ttin

g

Ytterbium Fiber Laser FL 500 FL 1000 FL 1500 FL 2000 FL 3000 FL 4000

Wavelength μm 1.07 - 1.08 1.07-1.08 1.07-1.08 1.07-1.08 1.07-1.08 1.07-1.08CW beam power, max. W 525 1050 1575 2100 3150 4200Pulse peak power W 500 1000 1500 2000 3000 4000Power stability % ± 2 ± 2 ± 2 ± 2 ± 2 ± 2CW beam power, min. W 50 100 150 200 300 400Pulse frequency, max. Hz 2000 2000 2000 2000 2000 2000Connected load kW max. 1.6 max. 3.1 max. 4.7 max. 6.2 max. 9.1 max. 12.1

Cutting Capacity

reinforced steel mm 4 8 10 12 16 20Stainless steel mm 2 4 5 6 8 10Aluminum (AIMg3) mm 2 4 5 6 8 12Brass mm 2 4 5 6 8 10Copper mm 1 2 2 3 5 6

Specifications D.Laser MT 3015 FL

X / Y / Z axis travel mm 3100 / 1550 / 125Plate thickness (max.) mm 3000 x 1500Max. part weight kg/dm2 2Rapid feed X / Y axis m/min 85Axis acceleration m/s2 10Positioning accuracy mm ± 0.05Repeatability mm ± 0.05Footprint (WxDxH) of the complete system mm 9000 x 7500 x 2300

Part No. 140 888Price € XX,XXX.00

Cu

ttin

g

Depending on the installed laser power, different cutter heads are used, and every cutter head guarantees excellent cut quality:

• LightCutter up to 1.5 kW with manually adjustable focal position

• ProCutter starting at 2 kW (see image) with selectable focal position and integrated cutter head monitoring

• Automatic laser nozzle cleaning


30

B

Plasma-Jet DSL

Prices 25,000.00

Specifications DSL 1530 2040 2060 2080 20120 3020 3040 3060 3080 30120

Work area

Cutting width mm 1600 2100 2150 2150 2150 3150 3150 3150 3150 3150Cutting length mm 3050 4150 6250 8350 12550 2050 4150 6250 8350 12550Distance between cutter head and table mm 170 170 170 170 170 170 170 170 170 170Rapid feed mm/min 30000 30000 30000 30000 30000 30000 30000 30000 30000 30000Table load capacity max. kg/m2 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000Table height mm 800 800 800 800 800 800 800 800 800 800Dimensions/Weight

Total width mm 3000 3500 3500 3500 3500 4500 4500 4500 4500 4500Total length mm 4500 5500 7500 9500 13500 3500 5500 7500 9500 13500Weight kg 2950 5400 7000 8600 11800 4500 6600 8700 10800 15200

Shown withoxy-fuel torch (optional)

• Dual-drive bridge• High-quality linear guides on all axes• Dynamic AC servo drives on all axes with maintenance-free, zero-backlash

planetary gears• Low-wear and low-maintenance helical gears are designed for continuous

operation• Optimum track speed even for fine contours and tight radii• Automatic torch height control• Stand-alone cutter table features rigid steel construction for high load capacity

• Stand-alone table eliminates thermal and mechanical influences on the plasma cutter system

• Quick-coupling for cutter head allows quick head exchanges for reduced tooling time

• Use the existing cutting parameters stored in the control to find the optimum cut

• Available with 5-axis cutter head, tube cutter, and many more options

Plasma Cutting Systems

World-Class Plasma Cutter Systems - integrates Know-how and technology of Hypertherm®

PREMIUM cutting systems come in a wide

variety of equipment packages featuring

up to 5-axis cutters


31

Options Part No.

• Automatic gas console 251 916• "Messer" oxy-fuel cutter head "Messer" 251 915• Manual control unit 251 910• Joystick at the machine bridge 251 932• ProNest® software package 251 918• ProNest® Module optional software - Gap cutting 251 921 - Collision prevention 251 919 - Combined severing cuts 251 920• TurboNest® optional software 251 917

Specifications DSL 30150 30180 30240 4060 4080 40120 40150 40180 40240

Work area

Cutting width mm 3150 3150 3150 4150 4150 4150 4150 4150 4150Cutting length mm 15700 18850 25150 6250 8350 12550 15700 18850 25150Distance between cutter head and table mm 170 170 170 170 170 170 170 170 170Rapid feed mm/min 30000 30000 30000 30000 30000 30000 30000 30000 30000Table load capacity max. kg/m2 1000 1000 1000 1000 1000 1000 1000 1000 1000Table height mm 800 800 800 800 800 800 800 800 800Dimensions/Weight

Total width mm 4500 4500 4500 5500 5500 5500 5500 5500 5500Total length mm 16500 19500 25500 7500 9500 13500 16500 19500 25500Weight kg 19300 21300 27400 10800 13800 19800 25700 28800 37800

Cu

ttin

g

Standard Equipment: Hypertherm® MicroEDGE® Pro CNC,Hypertherm® Plasma Source, Hypertherm® Cutter Head, Hypertherm® Nestmaster® Nesting Software, Z axis with servo-driven torch height control (THC), magnetic torch coupler, work table with vaccuum connector and automatic shutter control, operator manual and programming instructions

Options Part No.

• Mechanical angle cutter 251 933• 5-axis cutter 251 922• Tube cutter for up to 3 m lengths 251 923• Tube cutter for up to 6 m lengths 251 936• Extension for tube cutter, 1 m long pieces 251 927• Additional tube support 251 925• Adapter for square tube cutter 251 926• Filtered exhaust system, 4000 m3/h 251 929• Filtered exhaust system, 8000 m3/h 251 930• Filtered exhaust system, 12000 m3/h 251 931

Shown with 5-axis cutter head and

tube cutter (optional)


32

B

Plasma-Jet DSL Compact

Plasma Cutting Systems

Extremely compact design - for the most demanding quality requirements

tube cutter (optional)

- Cutting tubes with round orrectangular cross-section

- 30 - 140 mm Ø- 20 - 100 mm edge length- maximum tube length depends on table length- max. part weight 100 kg

The Plasma-Jet DSL Compact systems set themselves apart from the Plasma-Jet DSL series by a fully integrated machine frame, that houses all system components, so the machine can be transported in one piece and requires minimum space. Even the small Powermax plasma sources are stored on a shelf inside the frame.

The standard equipment includes the same high-quality components as the larger series: dual-drive bridge, high-quality linear guides, dynamic AC servo-drives, helical gears, automatic torch height control, magnetic cutter head holder serving as collision guard, optimum cutting data preset in the control. These machines provide the same excellent cutting performance as the Plasma-Jet DSL series.


33

Specifications DSL Compact 1020 1530

Work area

Cutting width mm 1000 1500Cutting length mm 2000 3000Distance between cutter head and table mm 150 150Rapid feed mm/min 30000 30000Table load capacity max. kg/m2 1000 1000Table height mm 800 800Dimensions/Weight

Total width mm 1700 2200Total length mm 3420 4420Weight kg 2050 2550

Standard Equipment

Hypertherm® MicroEDGE® Pro CNC, Hypertherm® plasma source, Hypertherm® cutter head, Hypertherm® Nestmaster® nesting software, Z axis with servo THC, magnetic torch coupler, work table with vacuum connector and automatic shutter control, operator manual and programming instruc-tions

Cu

ttin

g

Plasma-Jet DSL Compact 1530 is shown with tube cutter (optional)Part No. 420 696

Options Part No.:

• Tube Cutter 251 924• Automatic gas console 251 916• Manual Control Unit 251 910• Joystick at the machine bridge 251 932• • ProNest® software package 251 918• ProNest® software module

- Gap cutting- Collision prevention- Combined severing cuts

251 921251 919251 920

• TurboNest® software option 251 917• Mechanical angle cutter 251 933• "Messer" oxy-fuel cutter head 251 915• Filtered exhaust system, 4000 m3/h 251 929• Filtered exhaust system, 8000 m3/h 251 930• Filtered exhaust system, 12000 m3/h 251 931

Servo Torch Height Control (THC)

• THC over the plasma arc ensures quality and productivity across the entire cutting process.

• The magnetic torch coupler protects drives and torch in case of collisions.


34

Plasma-Jet Eco Compact

• Plasma cutting system for personal use providing high value at a lost cost• Careful selection of the optimum components ensures that the same cutting

functionality is available as in large plasma cutting systems• The compact machine frame is perfect for small spaces

Standard Equipment:

dual-drive bridge, gear drives for X/Y movement, ESA servo drives, integrated linear guide with preloaded ball screws for Z axis, Hypertherm plasma source, torch height control, magnetic cutter head coupler, work table with vacuum connector and auto-matic shutter control, ESA-CNC control, grid nesting software, operator manual and programming instructions

Specifications 1020 1530

Work area

Cutting width mm 1000 1500

Cutting length mm 2000 3000

Distance betweencutter head and table mm 150 150

Rapid feed mm/min 30000 30000

Table load capacity max. kg/m2 1000 1000

Table height mm 800 800

Dimensions/Weight

Total width mm 1700 2200

Total length mm 3420 1000

Weight kg 2050 2550

Part No. 143 026 143 024Price € 143 027 143 025

Prices starting at 0,000.00

Plasma Cutting System

The cost efficient solution for easy production jobs


B

In plasma cutting, the electric arc between electrode and workpiece is constricted by a cutting nozzle so that a plasma beam of high energy density is gene-rated as an eff ective cutting tool for metals.

Options Art.-Nr.

• Filtered exhaust system, 4000 m3 251 929

35

TECHNOLOGY INSIDE

• Superior cut quality and durability

• Maximized productivity

• Minimized operating cost

• Unsurpassed process flexibility

Hypertherm® P lasma Source

These plasma sources fulfill all the needs of a powerful, heavy-duty plasma

cutting system - they are simple, reliable and unbelievably productive

NestMaster®

• CAD/CAM nesting software can fulfill the most demanding requirements. Let us help you select the perfect solution for your needs.

Nesting Software

TurboNest® ProNest®

For superior angularity, glossy cut surfaces, and sharp edges in thin alloyed steel

HDi™-Technologie

Workpiece

HyFlow™nozzle with axial water injection

Secondarygas inlet

Plasmagas inlet

Plasmagas exhaust

Hypertherm protectiveshield technology

• The optimum control for any requirements

• Easy to operate, absolutely reliable and powerful

• With the CutPro Wizard, even inexperienced users can manufacture cut parts after a few minutes

CNC Control

Edge® Pro CNC MicroEDGE® Pro CNC

This cutting technology for plain carbon steel produces a significantly improved hole quality

True Hole®

with True Hole®

without True Hole®

Plasma sources for plasma cutting systems

Cu

ttin

g

Plasma Source Powermax 65®/105® Max Pro 200® HPR 130 XD® HPR 260 XD® HPR 400 XD®

Cutting capacity in plain carbon steel

Virtually burr-free mm -- 20 16 32 38 Hole cutting capacity in production mm 16/22 32 32 38 50 Cut-off (edge-start) mm 25/38 75 38 64 80 Cutting capacity in steel alloy

Hole cutting capacity in production mm -/- 25 20 32 45 Cut-off (edge-start) mm -/- 64 25 50 80


36

B

Water-Jet

Options

• 5-axis cutter head• Dual-head cutting• Drill unit• Laser pointer• Level control and collision guard• Water level control• Abrasives container for 1000 kg sand supply• Sludge vacuum system• Oil/air cooler• Water treatment system• Water additive for silicate stabilization• Starter kit• Stainless steel cutting table surfacing for all Water-Jets

• Very rigid dual-drive machien bridge• Rigid frame construction (sides are made of stress-free annealed and milled

monoblocks, which are fastened with pins during machine setup)• Premium linear guides on all axes• Ground and hardened helical gears• Robust digital servo-drives• Totally enclosed moving units to protect against ingress of water and dust• Electronically monitored central lubrication system• Stand-alone cutting table with high load capacity• Exchangeable support grid with galvanized (standard) or stainless steel

(option) slats• Powerful CNC machine control• Intuitive CAD/CAM software• Swiveling control panel attached to the machine

Gantry-Type Water-jet Cutting System

Cutting solution for virtually any type of material

The Water-Jet is a universal tool for cutting


37

b

Cu

ttin

g

Standard Equipment:

Water-Jet Cutter System with separate cutting table,

support grid with galvanized slats, BFT Ecotron 40.37

high-pressure pump with soundproofing enclosure and

proportional valve, abrasives cutter head, abrasives

conveyor system, abrasives container for 200 kg sand

supply, swiveling control panel attached to the machi-

ne, electronic hand-wheel, CNC control, CAD/CAM

software, operating and programming instructions

High-Pressure System BFT Ecotron 40.37

(included in standard equipment)

• The most cost-effective high pressure pump made by a world leading manufacturer

• Operating pressure can be adjusted from 50 to 380 MPa via an infinitely variable proportional valve

• Optimized hydraulic system• Oil/air cooler or optional oil/water cooler • Pressure booster with exceptional lifetime and large

pulsation damper • Other high-pressure systems are available as

options (for specifications and more information, see page 40)

The water-jet is a universal tool:

• No thermal stress and only minimal mechanical stress

• No hardening or intrinsic tension on the part

• No dust, smoke or toxic fumes

• Small kerf width and very clean cut edges

• Virtually burr-free cuts = no rework necessary

• Direct plunge-cut at any position

Specifications Water-Jet 2010 3015 3020 2040 2060 3040 3060 3080

Cutting capacity mm 2050x1050 3050x1550 3050x2050 2050x4050 2050x6050 3050x4050 3050x6050 3050x8050

Z axis travel mm 200 200 200 200 200 200 200 200

max. table load capacity kg/m2 1500 1500 1500 1500 1500 1500 1500 1500

rapid feed X / Y / Z axis mm/min 20000 20000 20000 20000 20000 20000 20000 20000

Work feed max. mm/min 5000 5000 5000 5000 5000 5000 5000 5000

Positioning accuracy mm +/- 0,06 +/- 0,06 +/- 0,06 +/- 0,06 +/- 0,06 +/- 0,06 +/- 0,06 +/- 0,06

Repeatability mm +/- 0,05 +/- 0,05 +/- 0,05 +/- 0,05 +/- 0,05 +/- 0,05 +/- 0,05 +/- 0,05

Overall dimensions (WxDxH)(without pumps, sand tank and control)

mm 3450x2000x 2400

4450x2500x 2400

4450x3000x 2400

3450x5000x 2400

3450x7000x 2400

4450x5000x 2400

4450x7000x 2400

4450x9000x 2400

weight (without water) kg 2420 3370 3930 4960 6620 5950 8310 10500

Part No. 166730 166731 166732 166733 166734 166735 166736 166737

Preis €


38

Hydro-Jet Vario

• completely equipped for Abrasive & Pure-Water Cutting• Flying Bridge design featuring an exceptionally solid construction• All axes feature high-quality servo-motors and preloaded ball

screws• Work area is open on 3 sides for optimal material handling• Premium CNC control system for maximum operator comfort

Water-jet Cutting Systems

Various applications and expansion levels

Standard Equipment: Water-Jet Cutter System with stand-alone stainless steel cutting table, stainless steel support slats, BFT Ecotron 40.37 high-pressure pump with soundproofing enclosure, proportional valve and check valve, abrasives cutter head with high-pressure filter, abrasives conveyor system, abrasives container for 1000 kg sand supply, swiveling control panel with TFT monitor attached to the machine, electronic hand-wheel, GPlus 450 Cut CNC, CAD/CAM software with nesting program, operating and programming instructions

Specifications Hydro-Jet Vario 1313 1525 1530 2040

Cutting capacity mm 1300x1300 2500x1500 3000x1500 4000x2000

Z axis travel mm 155 155 155 155

max. table load capacity kg/m2 2000 800 800 800

Rapid feed mm/min 20000 8000 8000 8000

Positioning accuracy mm +/- 0.1 +/- 0.1 +/- 0.1 +/- 0.1

Repeatability mm +/- 0.05 +/- 0.05 +/- 0.05 +/- 0.05

Overall dimensions (L x W x H) mm 2900x2800x2100 3700x4200x2000 3700x4200x2000 4200x6200x2000

weight (without water) kg 2000 3000 3500 4500

weight with water kg 4000 5000 7000 10500

Abrasive sand container capacity (max) kg 1000 1000 1000 1000

max. sand feed gram/min. 0 - 500 0 - 500 0 - 500 0 - 500

Part No. 166 226 166 215 166 217 166 218

Price €

BFT Ecotron 40.37 High-Pressure System

• The most cost-effective high pressure pump made by a world leading manufacturer


• Optimized hydraulic system• Oil/air cooler or optional oil/water cooler• Pressure booster with exceptional lifetime and large

pulsation damper• Other high-pressure systems are available as

options (For specifications, see page 40)

Hydro-Jet Vario 2040 is shown

Prices starting at 0,000.00 0,000.00


B

39

ALLFI

Last not least = Vario-SystemLast not least = Vario-System

5-axis cutting system

• Chamfering up to 60°

• TaperControl - cutting angle correction feature

for high-precision cutting results

• 5-axis cutting kinematics with Harmonic drives = high dynamics and precision

• Endless Rotating = no contour interruptions and no repeated plunge-cuts = time and cost

savings

For additional options for this machine, visit our website and search for Hydro-Jet Vario (Product Search)

• Very large metering bandwidth and high-precision dosing of abrasives • Infinitely variable metering can be set directly at the machine's control panel• Large abrasives tank (1 t) accepts entire "big bags" from abrasives suppliers

Hydro-Jet Vario 1313 is shown with 5-axis cutter head

The wide variety of application possibilities makes it diffi cult for water-jet cutting newcomers to properly estimate the cost-eff ectiveness of all equipment variations up front. With our Vario System, the user enjoys maximum fl exibility and can expand any-time on an as-needed basis!

Call us for an individual consultation and demo appointment!

Tel. +49 4321-609131

Abrasives system Options

• 5-axis cutter head• Laser pointer• Level control and collision guard• Sludge vacuum system• Water additive for silicate stabilization• Water treatment system


Cu

ttin

g

40

Water-Jet • Hydro-Jet Vario • Hydro-Jet Eco

BFT Ecotron 40.37 High-Pressure System (standard)

BFT Servotron

High-pressure systems for water-jet cutting

The basis for reliable water cutting

Hypertherm HyPrecision KMT Streamline

Preis ab 25.000,-

Specifications BFT Servotron 40.37

Main motor rating kW 37Flow rate (max.) l/min 3,8Max. operating overpressure MPa 380Continuous operating pressure (max.) MPa 380Dual stroke (max.) min-1 38Ambient temperature for oil/air cooler 10 - 35°Ambient temperature for oil/water cooler 10 - 45°Dimensions / width x depth x height mm 1800 x 800 x 1150Weight kg 1000

BFT Servotron

Energy efficient BFT Servotron 40.37 high-pressure

pump with variable frequency servo drive featuring

high dynamics with 37 kW power and flow rates up

to 1 gallon (3.8 Liters) per minute.


• All components are installed on a base frame, enclosed in a sound proofing hood; the electric control is installed in a control cabinet and mounted on the base frame

• Optimized hydraulic system for extremely fast turnaround times • Water infeed automatically stops when the pump is shut off • Pressure booster with large plunger diameter and long stroke resulting in excellent

service life• Pulsation damper with large 84 oz. (2.49 liter) storage volume ensures reduced

pressure fluctuations• Pressure relief valve is included• All warnings and monitoring messages are shown in plain text on the touchscreen

panel

Upon request, these water-jet cutting systems can be offered with other

high-pressure pumps

Hypertherm HyPrecision KMT Streamline

Preis ab 25.000,-


41

B

Hydro-Jet Eco 0515 SL

Sch

ne

ide

n

Specifikation Hydro-Jet Eco 0515 SL

Cutter System Cutting capacity mm 1500 x 500Z axis travel mm 80operating pressure bar 3500abrasive / pure-water yesAbrasives Containers kg 200drive type for X / Y axis Preloaded ball screwsdrive type for Z axis Hand-wheelmax. feed mm/min 4000Accuracy

Positioning accuracy X / Y axis mm ± 0,1 / 300Repeatability X / Y axis mm ± 0,05 / 300Dimensions/Weight

Overall dimensions (LxWxH) mm 3700 x 3700 x 3000weight (total) kg 3640

Part -No. 166 207Preis €

• High-precision cuts in virtually any material• Quick programming on an integrated PC control with graphical user interface;

software package included• perfectly tuned drive system• high-pressure pump, 11 kW • Compact machine design allows easy transportation and requires minimal

installation work Guide machine, water basin, settling basin, and control cabinet are mounted on a granite machine frame

Standard Equipment:

GPlus 450 Cut CNC control with TFT monitor, grid nesting, electronic hand-wheel, control panel, BFT Ecotron high-pressure pump, ab-rasives cutter head, abrasives container, sand metering, 3-chamber settl ing tank, operating and programming instructions

Options Part No.

• System for stabilization of water quality

251 091

• Water chemistry 251 092• Contour nesting 180 820• Pump housing 180 769• Oil/air cooler 250 213• High-pressure corner filter 50 mμ 576 078• Check valve for abrasive system 576 068• Abrasives tank, 1 ton 250 598• Starter Set 166 211• Dryer for compressed air 251 090• Light curtains on 2 sides 180 337• Abrasive sludge vacuum system 4 m2 180 735

Cu

ttin

g

NEW Micro-Water-Jet Cutting

Finest contours with superior surface quality

Water-jet Cutting Systems

Enter the fascinating world of water-jet cutting technology!


42

PFG 2513

Engraving and Milling Machine

Large work area and superior precision and performance

• a major advantage of this machine is the heavy construction with fixed gantry and axis-aligned work table

• the use of natural, precision-machined granite for the machine frame ensures maximum accuracy and stability

• this exclusive material provides complete resistance against corrosion, acids and alkaline solutions

• a powerful vacuum pump ensures a firm hold of the workpiece on the machining table

• the high-quality 9 kw / 5 kW HSD spindle motor (made in Europe) provides a wide rpm range and pneumatic tool clamping

• ceramic bearings at the tool mount and a powerful air cooler provide maintenance-free, highly reliable service

• the linear 8-station tool changer is designed without complex mechanics for short travels and quick tool changes

• all three axes are provided with linear guides and preloaded ball screws for increased accuracy, high precision and excellent rigidity

• syntec CNC controls are known for their performance and reliability and are used worldwide on premium engraving and machining centers

• tool length measurements simplify machine configurations, save time and increase production accuracy

B

Extensive standard equipment

XX.XXX,-

Shown without CE-certified equipment


43

Specifications PGF 2513

Work Area

X axis travel mm 2.500 Y axis travel mm 1.300 Z axis travel mm 200 Table setup area mm 2.500 x 1300 Main spindle

Speed range 1/min 6000 - 24000Spindle mount ISO 30 (DIN 69871)Tool Carrier

Tool stations 8 Feed

X axis operating speed mm/min 1.800Y axis operating speed mm/min 1.800 Rapid feed mm/min 10.000 Drive Capacity

Main motor rating kW 7,5 / 9,0 Voltage V 400 Dimensions/Weight

Dimensions (length x width x height) m 3,2 x 2,2 x 2,0 Weight kg 2.500 Part No. 171960 Preis € XX.XXX,-

• a highly efficient cold-air nozzle delivers precise cooling of tools and workpiece

• the granite machine frame with fixed gantry and axis-aligned work table is precise and extremely robust

Precision-ground marble elements on all axes

Linear 8-station tool changer


CN

C M

ach

inin

g

Standard Equipment

Syntec control, 8-station tool changer, main spindle motor (9/5 kW), collet chuck ISO 30 (DIN 69871), draw bolts (DIN 69872), ER collets (3.175 mm / 4 mm / 6 mm / 8 mm / 12 mm), tool length measuring de-vice, vacuum clamping plate, vacuum pump, cold-air nozzle, operating tools, operator manual

Documents

B Laser-Jet 1512 · 2512 / Faserlaser - Linna Trade · Laser-Jet 1512 · 2512 / Faserlaser ... reinforced steel mm 4 8 10 12 16 20 Stainless steel mm 2456810 Aluminum (AIMg3)