B-2008sweets.construction.com/swts_content_files/2647/0530_084100-BLU_08.pdfskilled craftsman whose forte was hand-forged decorative wrought iron railings, gates, ... DEADLOCK HOUSING

Blumcraft of Pittsburgh is celebrating its 100th anniversary this year and wishes to thank the many architectural designers and installation special-ists for enabling us to have achieved a century of success.

100thanniversary

1908-2008

B-2008COPYRIGHT 2007

TEMPERED GLASS DOORS

PANIC AND DEADBOLT HARDWARE

THIS CATALOGUE IS PREPARED EXCLUSIVELY FOR THE ARCHITECTURAL PROFESSION

460 MELWOOD AVENUEPITTSBURGH, PA 15213-1195

TELEPHONE 412-681-2400FAX 412-681-6840

E-mail (general Inquiries for quick response): [email protected] E-mail (for drawings/engineering department): [email protected]

Visit our website at www.blumcraft.com

08 41 00/BLUBuyline 0530

0530_01.indd 10530_01.indd 1 10/15/07 8:08:53 AM10/15/07 8:08:53 AM

The Early YearsBlumcraft’s founder Hyman Blum, a young artisan from Latvia, immigrated to America in 1908. He was a highly skilled craftsman whose forte was hand-forged decorative wrought iron railings, gates, lighting fi xtures, and ornamental hardware. His creativity with metals and the prudent business sense of his three sons, Max, Louis, and Harry facilitated the transition of the Hyman Blum Company into Blumcraft of Pittsburgh.

The Blum collection of exquisite metal treasures can be seen at the Heinz History Center in Pittsburgh.

A New EraDuring World War II, metal was not allowed to be used for decorative purposes, but after the war ended and the restrictions were lifted, Blumcraft pioneered the development of innovative adjustable aluminum handrail components. As architectural trends changed, Blumcraft again enhanced its leadership role in the industry by adding wood, glass, bronze, brass, and stainless steel to its product line. Following work-ing relationships with PPG Industries and Libbey Owens Ford, Blumcraft launched new product lines, thanks in part to the

Inside This Catalogue

The Evolution ofBlumcraft

0530_02.indd 20530_02.indd 2 10/16/07 4:04:09 PM10/16/07 4:04:09 PM

creativity of a brilliant designer, Bill Horgan. Tempered glass doors and attractive operating hardware once again estab-lished a higher level of architectural design acceptance.

Blumcraft TodayBlumcraft of Pittsburgh continues to proudly manufacture fi ne top quality American made products. With the passing of Louis Blum, the last remaining partner, on March 31, 2004 at the age of 94, the Blumcraft legacy continues under the leadership of Myron Caplan and Rick Kremer. Having over 80 years of combined experience with the fi rm, these men will lead Blumcraft into the future.

As always, Blumcraft will assist architects by publishing catalogues in Sweets hard copy fi les, by maintaining up to date sections within the Sweets website, and by supporting its own online website, www.blumcraft.com

Throughout the years, architects have come to expect superb quality of design exhibited by tempered glass doors, architec-tural hardware, railing systems, and display case doors.

Blumcraft of Pittsburgh will fulfi ll these expectations with service and quality!

Tempered Glass Doors 3/4” High Rails—Series1301 ....................... 3-8, 10-11 3-1/2” High Rails—Series 640C ...............................14 Tall Rails—Series 640CH/640SH ..............................15 Thin Vertical Stiles—Series 640SH.............................15 Series 250 .............................................................16 Tall Doors—Series 860/1200 ..................................17

Panic Hardware (Tubular) Top Latching H-100 ............................................19-23 Bottom Latching H-110 ......................................24, 25 Applications ......................................................30, 31

Deadbolt Hardware (Tubular) Top Bolt DB-100, DB-160, DB-170 ................19-23, 27 Bottom Bolt DB-110, DB-140, DB-150 ..........24, 25, 27 Top and Bottom Bolts DB-130 ...................................26 Applications ......................................................30, 31

Dummy Hardware (Tubular) Matching Panic and Deadbolt Hardware . . . Refer to Panic and Deadbolt Pages

Tubular Hardware/Handle Combinations ...... 28, 29

Pull Handles (Non-Tubular) ............................... 32-34

Sidelights ..................................................................6

Floating Transom Bars ..........................4, 12, 13, 31

Center Housings .....................................................35

Specifi cations .........................................................37

FOR INFORMATION ON DISPLAY CASE DOORS AND HANDRAILS, SEE PAGES 38 AND 39.

H-100-A PANIC DEVICE SHOWN

END VIEW EXTERIOR VIEW

1301 DOORS WITH H-100-A PANIC DEVICES

FOR ADDITIONAL PANIC, DEADBOLT, AND PUSH/PULL HARDWARE SEE PAGES D19 THROUGH D36

CEILING CHANNEL

D3

DOOR SERIES 1301MORE GLASS . . . LESS METAL

DOOR SERIES 1301 AVAILABLE IN 1/2" OR 3/4" TEMPERED GLASS.METAL IN STAINLESS STEEL OR BRONZE ONLY.

DOORSERIES 1301

0530_03.indd 30530_03.indd 3 10/15/07 8:09:58 AM10/15/07 8:09:58 AM

DOORSERIES 1301

END VIEW

CEILING CHANNEL

DEADLOCK HOUSING DB-150-P SHOWN

B-1250 TRANSOM BAR

EXTERIOR VIEW

1301 DOORS IN COMBINATION WITH A FLOATING TRANSOM BAR

PANIC DEVICES AND DEADBOLT LOCK HOUSINGSCAN BE USED WITH THESE DOORS

FOR HARDWARE DETAILS SEE PAGES D19 THROUGH D36FOR TRANSOM BAR DETAILS SEE PAGES D4, D12, D13 AND D31

4D

0530_04.indd 40530_04.indd 4 10/15/07 8:10:19 AM10/15/07 8:10:19 AM

5D

DEAD BOLT LOCK HOUSING DB-130F SHOWN

END VIEW

KEY CYLINDERS ORTHUMBTURN

EXTERIOR VIEW

1301 DOORS WITH FULL HEIGHT DEADBOLT HOUSINGS DB-130F

LOCKING IS SIMULTANEOUS AT TOP AND BOTTOM OR SEPARATELY AT TOP OR AT BOTTOM

FOR ADDITIONAL PANIC, DEADBOLT, AND PUSH/PULL HARDWARE SEE PAGES D19 THROUGH D36

DOOR SERIES 1301MORE GLASS . . . LESS METAL

DOOR SERIES 1301 AVAILABLE IN 1/2" OR 3/4" TEMPERED GLASS.METAL IN STAINLESS STEEL OR BRONZE ONLY.

DOORSERIES 1301

0530_05.indd 50530_05.indd 5 10/15/07 8:10:37 AM10/15/07 8:10:37 AM

DOORSERIES 1301

6D

DOOR SECTIONS

SIDELIGHT SECTIONS

ALL SECTIONS FULL SIZE

MATCHES DOOR RAIL SIGHTLINE

EB

GLASS FURNISHED BY LOCAL INSTALLER

NOTE: GLASS SIDELIGHTS WITH TOP & BOTTOM RAILS TO MATCH RAILS OF DOOR ARE FURNISHED COMPLETELY BY BLUMCRAFT

RB

CLAD BASE CHANNEL

ALUMINUM BASE CHANNEL

1/2" GLASS

STEEL STRUCTURE

CEILING CHANNEL

3/4" GLASS

UPPER DOOR PIVOT WILL SLIDE IN ANY PART OF CHANNEL FOR

EXACT ALIGNMENT WITH THE

FLOOR CLOSER . . . ELIMINATES

MACHINING

SHIMS



CEILING CHANNELS

PART NO. C-7500 C-7501

GLASS 1/2" 3/4"

ALUMINUM HEIGHT

2" 2"

ALUMINUM WIDTH

1-1/2" 1-3/4"

*CLAD HEIGHT

2-1/8" 2-1/8"

*CLAD WIDTH 1-11/16" 1-15/16"

*IF EXPOSED, CAN BE CLAD IN STAINLESS STEEL OR BRONZE

BASE CHANNELS

PART NO. RB-500 OR RB-750 0R EB-500 EB-750

GLASS 1/2" 3/4"

ALUMINUM HEIGHT

3/4" 3/4"

ALUMINUM WIDTH

1" 1-1/4"

*CLAD HEIGHT

15/16" 15/16"

*CLAD WIDTH 1-1/8" 1-3/8"

*IF EXPOSED, CAN BE CLAD IN STAINLESS STEEL OR BRONZE

0530_06.indd 60530_06.indd 6 10/15/07 8:10:58 AM10/15/07 8:10:58 AM

7

DOORSERIES 1301

D


13-9/16"

2-7/8"

2-1/8"

2-5/8"

STD.

SPECIAL CEMENT CASE FURNISHED BY BLUMCRAFT

INSTALLATION DETAILS

2-7/8" DORMA BTS-80 FLOOR CLOSER

4-1/8"

CEILING GLAZING CHANNEL • C-7500 FOR 1/2" GLASS 1-1/2" X 2" • C-7500 FOR 3/4" GLASS 1-3/4" X 2"

ADJUSTABLE TOP PIVOT SLIDES IN CHANNEL

PILE WEATHERSTRIPPING OPTIONAL

SECTION THRU SIDELIGHT ADJOINING WALL

CAULK

AS AN ALTERNATE, FOR FIXED TOP PIVOT NOT REQUIRING THE CHANNEL SEE PAGE D8

4-1/8"

0530_07.indd 70530_07.indd 7 10/15/07 8:11:50 AM10/15/07 8:11:50 AM

8D

FIXED LOCAL WALKING BEAM TOP PIVOT

BOTTOM RAIL IS 3/4" HIGH STANDARD OR CAN MATCH 1-1/4" HIGH TOP RAIL

PARTIAL ELEVATION

1-1/4" MIN.

1" FIXED

PARTIAL SECTION

STANDARD TOP PIVOT (CEILING CHANNEL C-7500 OR C-7501 NOT REQUIRED)

1/8" MIN.

LINE OF FINISHED CEILING

ELECTROMAGNETIC LOCK

ELECTRIC DEADBOLT (DROP BOLT)

METAL SHIMS AS REQUIRED LINE OF FINISHED CEILING

OR C-7501 1-3/4"

C-7500 1-1/2"

LOCAL MOUNTING BLOCK

2"

2-1/4"

CEILING CHANNEL

C-7500 FOR 1/2" GLASS C-7501 FOR 3/4" GLASS

LINE OF STRUCTURE ABOVE METAL

SHIMS AS REQUIRED

1-3/4"

2" ELECTRIC DEADBOLT

C-7501 CEILING CHANNEL WITH FS-13 SNAP -IN FILLER STRIPS

1-1/4" MIN.

PARTIAL SECTION 1-1/8"

FIXED

1/8" MIN

FIXED DOOR STOP

NOTE: RAILS CAN BE ADAPTED FOR VARIOUS TYPES OF ELECTRIC DEADBOLTS, CONTACT BLUMCRAFT WITH MODEL NUMBER OF SELECTED DEADBOLT TO INSURE COMPATIBILITY.

MAGNETIC CONTACT (DOOR POSITION SWITCH)

C-7500 CEILINGCHANNEL FOR 1/2" GLASS

1-1/2" METAL SHIMS AS REQIURED

WIRE ACCESS

MAGNETIC CONTACT SWITCH

ACTUATING MAGNET IN RAIL

PARTIAL SECTION

3/4" FIXED

2"

1/8" MIN.

3/4" MIN.

3/4"

1"

1/2" GLASS

3/4" GLASS

PARTIAL SECTION

ELECTROMAGNETIC LOCK

ARMATURE

NOTE:RAILS CAN BE ADAPTED FOR VARIOUS TYPES OF ELECTROMAGNETICLOCKS. CONTACT BLUMCRAFT WITH MODEL NUMBER OF SELECTEDELECTROMAGNETIC LOCK TO INSURE COMPATIBILITY.

1/8" MIN.

SPECIAL APPLICATIONSDOOR SERIES 1301

0530_08.indd 80530_08.indd 8 10/15/07 8:12:13 AM10/15/07 8:12:13 AM

9

DOORSERIES 1301

D

A COMPARISON:SERIES 1301 AND SERIES 640C DOORS

WHILE THE 640C SERIES DOOR HAS MANY QUALITY FEATURES, AS AN ALTERNATE BLUMCRAFT SUGGESTS USING THE SERIES 1301 DOOR WITH LESS METAL AND MORE GLASS WHICH ELIMINATES THE CUMBERSOME RAILS.

THIS DISTINCTIVE FEATURE IS THE MAIN CHARACTERISTIC THAT SEPARATES THE TWO. WITH THE TOP AND BOTTOM RAILS BEING ONLY 3/4” HIGH, THE 1301 SERIES DOOR ACHIEVES THE ULTIMATE IN ARCHITECTURAL BEAUTY AND DESIGN.

THESE DOORS ARE VERSATILE, AS THEY CAN BE ADAPTED FOR DORMA BTS-80 OR JACKSON 900 FLOOR CLOSERS, ADJUST-ABLE PIVOTS, AND DOOR POSITION SWITCHES. WITH SLIGHT MODIFICATIONS TO THE TOP RAIL, SERIES 1301 DOORS ARE ALSO ADAPTABLE TO CENTER-PIVOTED OVERHEAD CLOSERS, STANDARD WALKING BEAM TOP PIVOTS, ELECTROMAGNETIC AND ELECTROMECHANICAL LOCKS.

WITH THE SERIES 1301’S LOW PROFILE, THE NEED FOR TALL BOTTOM RAILS THAT ARE REQUIRED TO COMPLY WITH A.D.A. IS NO LONGER NECESSARY. DOORS AND MATCHING SIDELIGHTS ARE AVAILABLE IN 1/2” OR 3/4” TEMPERED GLASS.

ALL BLUMCRAFT TUBULAR AND PANIC HARDWARE CAN BE INSTALLED ON SERIES 1301 DOORS.

THE 640C SERIES DOOR CERTAINLY HAS ITS OWN DISTINCTIVE LOOK BUT HAS SOME DISADVANTAGES. IN CERTAIN SITUATIONS SOME BUILDING CODES AND USAGE MAY INDICATE THAT THE BOTTOM LOCK SHOWN IS NOT IN COMPLIANCE WITH THE AMERICANS WITH DISABILITIES ACT SINCE IT IS OUT OF REACH OF THE HANDICAPPED. ANOTHER IS THAT THE PROJECTION OF THE BOTTOM RAIL FROM THE FACE OF THE GLASS CAN INTERFERE WITH A WHEELCHAIR. DETAILS OF THE 640C DOOR CAN BE FOUND ON PAGE D14.

DOOR SERIES 640CDOOR SERIES 1301

0530_09.indd 90530_09.indd 9 10/15/07 8:12:36 AM10/15/07 8:12:36 AM

H-110-A PANIC DEVICE SHOWN

PLAN VIEW OF OVERHEAD CLOSER

ADAPTER

END VIEW EXTERIOR VIEW

1/2" OR 3/4" TEMPERED GLASS

1-3/4"

BP-13 BOTTOM

PIVOT

3" X 4"

SECTION THRU DOOR HALF SIZE SCALE

C 4000 ALUMINUM 2" x 4" HEADER . . . IF EXPOSED CAN BE CLAD IN STAINLESS STEEL OR BRONZE

DORMA RTS-88 OVERHEAD CLOSER

F.S.12 FILLER

AT DOOR

DOORSERIES 1301

10D

AUTOMATIC OPERATORSERIES 1301 DOORS CAN BE MODIFIED AND ADAPTED FOR A VARIETY OF OVERHEAD AUTOMATIC OR POWER ASSISTED OPERATORS. THE TOP RAIL IS SLIGHTLY INCREASED IN SIZE TO ACCOMMODATE THE DIRECT DRIVE SPINDLE OR AN EXPOSED ARM OF OPERATORS MANUFACTURED BY BESAM, HORTON, LCN, OR NORTON; OTHER OPERATORS ON REQUEST. TO INSURE COMPATIBILITY, CONTACT BLUMCRAFT WITH THE MODEL NUMBER. THE BOTTOM RAILS CAN REMAIN 3/4” HIGH OR MATCH THE TOP RAILS DEPENDING ON THE ARCHITECT’S PREFERENCE.

OVERHEAD CLOSER DETAILSALL BLUMCRAFT DOOR HARDWARE APPLICABLE TO DOOR SERIES 1301

BLUMCRAFT RECOMMENDS THE USE OF FLOOR CLOSERS FOR TEMPERED GLASS DOORS

0530_10.indd 100530_10.indd 10 10/15/07 8:13:00 AM10/15/07 8:13:00 AM

D

SECTIONS THRU SIDELIGHTS HALF SIZE SCALE

CLAD BASE

CHANNEL

ALUMINUM BASE

CHANNEL

NOTE:GLASSSIDELIGHTSWITH TOP &BOTTOM RAILSTO MATCH RAILS OF DOORARE FURNISHED COMPLETELY BYBLUMCRAFT

C-4001 HEADER

C-4000 HEADER


GLASS FURNISHED BY LOCAL INSTALLER




BOTTOM RAIL

BOTTOM MOUNTING TRACK

TOP MOUNTING TRACK

TOP RAIL

EB

RB

PART NO. C-4001 C-400O

ALUMINUM HEIGHT

1-3/4" 2"

ALUMINUM WIDTH

4" 4"

*CLAD HEIGHT

1-13/16" 2-1/16"

*CLAD WIDTH

4-1/4" 4-1/4"

* IF EXPOSED, CAN BE CLAD IN STAINLESS STEEL OR BRONZE

HEADERS

PART NO. RB-500 OR RB-750 OR

EB-500 EB-750

GLASS 1/2" 3/4"

ALUMINUM HEIGHT

3/4" 3/4"

ALUMINUM WIDTH

1" 1-1/4"

*CLAD HEIGHT

15/16" 15/16"

*CLAD WIDTH

1-1/8" 1-3/8"

* IF EXPOSED, CAN BE CLAD IN STAINLESS STEEL OR BRONZE

BASECHANNELS

11

DOORSERIES 1301

SIDELIGHTS

0530_11.indd 110530_11.indd 11 10/15/07 8:13:22 AM10/15/07 8:13:22 AM

12D

B-1250 FLOATINGTRANSOM SYSTEM

• ELECTRIC STRIKES CAN BE USED WITH TRANSOMIN COMBINATION WITH BLUMCRAFT PANIC ANDDEADBOLT DEVICES. SEE PAGES D-30 AND D-31

• TRANSOM BARS CAN BE MOUNTED TO WALLS OR FRAMING. CONTACT BLUMCRAFT FOR DETAILS

WINDLOADS, STACK ACTION, VENTILATION LOADS, HEAVY USAGE ANDFREQUENCY OF OPERATION ARE FACTORS THAT AFFECT THE FOLLOWING:• GLASS THICKNESS • NECESSITY FOR FINS• TRANSOM BAR DIMENSIONS • FIN SIZEIT IS SUGGESTED THAT THE ARCHITECT’S STRUCTURAL ENGINEER REVIEWEACH ENTRANCE CONSIDERING THESE FACTORS.

BLUMCRAFT HAS DEVELOPED THIS TRANSOM SYSTEM TO GIVE THE ENTRANCE A CLEAN GLASS LOOK. THE NARROW HORIZONTAL MEMBERSUPPORTING THE TRANSOM GLASS IS SUSPENDED BY THIN STAINLESS STEEL RODS CONCEALED IN THE JOINTS BETWEEN

THE TRANSOM GLASS AND THE SIDELIGHTS. A HIGHLY REFLECTIVE FINISH OF THE B-1250 TRANSOM BAR WILLFURTHER MINIMIZE THE PRESENCE OF SUPPORTING MEMBERS AS IT BLENDS INTO THE REFLECTION

OF THE GLASS. THIS TRANSOM SYSTEM CAN ACCOMMODATE A PAIR OF DOORS OR ASINGLE DOOR FLANKED BY SIDELIGHTS . CONNECTIONS ARE ALSO AVAILABLE ON

ONE OR BOTH SIDES TO STRUCTURAL JAMB MEMBERS OR WALLS.

NOTE: CORNER CUTOUTS AND HOLES IN GLASS ARE ELIMINATED,

AVOIDING CRITICAL STRESS.

1301 DOORS WITH H-100-X PANIC DEVICES

0530_12.indd 120530_12.indd 12 10/15/07 8:13:43 AM10/15/07 8:13:43 AM

13D

CEILING GLAZING CHANNEL • C-7500 FOR 1/2" GLASS 1-1/2" X 2" • C-7501 FOR 3/4" GLASS 1-3/4" X 2"

1/8"

GLASS SIDELIGHT CAULK WITH CLEAR SILICONE

GLASS TRANSOM FLOATING TRANSOM BAR SUPPORT ROD

FLOATING TRANSOM BAR

B-1250

SIZE CAN VARY SUBJECT TO SPAN AND WIND LOAD

B-1250 FLOATINGTRANSOM SYSTEM

A. MINIMUM EXPOSED METAL MAINTAINS AN ALL GLASS ENTRANCE LOOK.

B. CORNER CUTOUTS AND HOLE FABRICATION OF THE GLASS ARE ELIMINATED, THUS AVOIDING CRITICAL STRESS POINTS IN BOTH TRANSOM AND SIDELIGHT GLASS

C. THE TRANSOM GLASS RESTS IN THE SLOT OF THE FLOATING TRANSOM BAR, ASSURING RIGID INSTALLATION OF THE TRANSOM GLASS.

D. THE GLASS TRANSOM GAINS LATERAL SUPPORT FROM ADJACENT SIDELIGHTS WITHOUT HOLES IN THE SIDELIGHT GLASS.

E. DOORS ARE EASILY ADJUSTABLE BOTH LATERALLY AND VERTICALLY FOR BETTER POSITIONING IN THE OPENING.

ADVANTAGES:

GLASSFINS

METALFINS

TRANSOM

SERIES 1301 DOOR

PRESSUREPAD

BLUMCRAFT’S FLOATING TRANSOM SYSTEM HAS BEEN ERECTED AND THOROUGHLY TESTED IN BLUMCRAFT’S OWN STATIC LOAD TESTING CHAMBER. GLASS APPLIED STRAIN GAGES ALONG WITH DEFLECTION GAGES CONTINUOUSLY MONITORED THE GLASS DURING TESTING. THE RESULTS ARE AVAILABLE TO ARCHITECTS UPON REQUEST. ARCHITECTS SHOULD SUBMIT PRELIMI-NARY SKETCHES AND ADVISE WIND LOADS FOR EXTERIOR USE.

THE TRANSOM BAR IS HELD IN PLACE USING PRESSURE PADS AT THE SIDELIGHT AND SUPPORT RODS HANGING FROM THE CEILING CHANNEL

SIDELIGHT

0530_13.indd 130530_13.indd 13 10/15/07 8:14:55 AM10/15/07 8:14:55 AM

14D

ALUMINUM FULL SIZE SECTION THRU BOTTOM AND TOP RAIL

DOORSERIES 640

BRONZE OR STAINLESS STEELFULL SIZE SECTION THRUBOTTOM AND TOP RAIL

SERIES 640 DOORS ARE AVAILABLE IN 1/2” OR 3/4” THICK TEMPERED GLASS.STANDARD TOP AND BOTTOM RAILS ARE 3-3/8” HIGH OR 3-1/2” HIGH (CLAD), BUT CAN BE FABRICATED UP TO 12” HIGH. RAILS AND STILES ARE FURNISHED IN ALUMINUM, BRONZE, OR STAINLESS STEEL CLAD. THESE DOORS ARE ADAPTABLE TO MOST OVERHEAD/FLOOR CLOSERS, AUTOMATIC OPERATORS, ELECTRIC DEADBOLTS, ELECTROMAGNETIC LOCKS, AND DOOR POSITION SWITCHES. CONTACT OUR SALES DEPARTMENT TO INSURE COMPATIBILITY. ALL BLUMCRAFT PANIC DEVICES, DEADBOLT HOUSINGS AND LOCKS ARE APPLICABLE TO SERIES 640.

0530_14.indd 140530_14.indd 14 10/16/07 3:54:47 PM10/16/07 3:54:47 PM

15D

FULL WIDTH HIGH RAIL

B B

A A

SERIES 640CH ALUMINUM, BRONZE OR STAINLESS STEEL

FULL WIDTH HIGH RAIL

METAL DOOR STILE

SERIES 640SH ALUMINUM, BRONZE OR STAINLESS STEEL

FULL SIZE SECTION A-A GLASS EDGES

FULL SIZE SECTION B-B ALUMINUM STILE

FULL SIZE SECTION B-B BRONZE OR STAINLESS STEEL

ALUMINUM, BRONZE OR STAINLESS STEEL

FULL SIZE SECTION

UP T

O 1

2"

HIG

H

DOORSERIES 640

0530_15.indd 150530_15.indd 15 10/15/07 8:15:23 AM10/15/07 8:15:23 AM

ALUMINUM FULL SIZE SECTION THRU BOTTOM AND TOP RAIL

DOORSERIES 250

ALUMINUM FULL SIZE SECTION THRU DOOR STILE

BRONZE OR STAINLESS STEEL FULL SIZE SECTION THRU DOOR STILE

BRONZE OR STAINLESS STEEL FULL SIZE SECTION THRU BOTTOM AND TOP RAIL

16D

AVAILABLE IN 1/2" OR 3/4" THICK TEMPERED GLASSHARDWARE SHOWN IS PANIC DEVICE H-100-A.

FOR EXTERIOR DOORS OVER 8'-6'' PRELIMINARY DRAWING SHOULD BE SENT TO BLUMCRAFT FOR REVIEW

ALL BLUMCRAFT PANICDEVICES, DEADBOLTHOUSINGS AND LOCKSARE APPLICABLE TO SERIES 250

DOOR SERIES 250 HAS FULL WIDTH TOP AND BOTTOM RAILS AND VERY THINVERTICAL STILES BONDED TO GLASS. AVAILABLE IN ALUMINUM, BRONZE OR STAINLESS STEEL

0530_16.indd 160530_16.indd 16 10/15/07 8:15:46 AM10/15/07 8:15:46 AM

DOORSERIES 860/1200

D

SERIES 860 SERIES 1200

3-7/8" 5-1/8"

17

SERIES 1200 DOORS ARE DESIGNED TO USE 1/2” THICK TEMPERED GLASS UP TO 12’-0” HIGH. THESE TALL DOORS ARE CONTROLLED BY STANDARD FLOOR CLOSERS. THE WEIGHT OF THE DOOR IS BORNE BY A HEAVY DUTY LOAD BEARING CEMENT CASE INDEPENDENT OF THE FLOOR CLOSER. A VARIETY OF BLUMCRAFT DEADBOLT AND PANIC HARDWARE IS ADAPTABLE TO SERIES 1200 DOORS.

SERIES 860 DOORS ARE ALSO DESIGNED TO USE 1/2” THICK TEMPERED GLASS, BUT ONLY UP TO 8’-6” HIGH. THIS SMALLER VERSION OF THE SERIES 1200 FEATURES SAFETY JAMB PROTECTION AND ELIMINATION OF THE TOP AND BOTTOM RAILS. OVERHEAD AND FLOOR CLOSERS ARE OPTIONS. ALL BLUMCRAFT PANIC AND DEADBOLT HARDWARE IS SUITABLE FOR USE WITH SERIES 860 DOORS.

0530_17.indd 170530_17.indd 17 10/15/07 8:16:15 AM10/15/07 8:16:15 AM

18D

HARDWAREAPPLICATIONS

1-1/8"

4 LHR

3 RHR

2 LHD

1 RHD

5 RH

6 LH

EXTERIOR

INTERIOR

DOOR SWING DIAGRAM

MORTISE CYLINDER EQUIVALENTS (1-1/8" NOMINAL LENGTH)

MANUFACTURER MODEL NO. CAM NO.

ARROW MC61 001

ASSA 6551 5

BEST 1E64 1EC4

CORBIN/RUSSWIN 1000-118 A02

FALCON 985 4

ILCO (LORI) 7186XX 1

MEDECO 10-0200 CT-Z01

SARGENT 41 13-0660

SCHLAGE* 20-001 B502-191

YALE 2153 1161

*Standard with Blumcraft Panic Devices and Deadbolt Housings

Removable core cylinders and thumbturns are applicable with the straight cam shown. Cylinder collars for Blumcraft hardware will vary with the cylinder lengths longer than 1-1/8"

A

B

Although the handle appears to be continuous, the operating portion of this device pivots at the “A” and “B” locations shown. A push on the panic handle any place between“A” and “B” operates the mech-anism by slightly moving the handle over the actuator post, thus retracting the bolt. When the door closes, the bolt is self-latching. All panics include a built-in dogging device.

PANIC DEVICE OPERATION

PANIC DEVICES, DEADBOLT HOUSINGSAND DUMMY HANDLES ARE AVAILABLEIN STAINLESS STEEL OR ARCHITECTURALBRONZE

BLUMCRAFT PANIC DEVICESMEET UL REQUIREMENTS

0530_18.indd 180530_18.indd 18 10/15/07 8:16:38 AM10/15/07 8:16:38 AM

19D

TUBULARDOOR HARDWARE

4-1/8"

HARDWARE IS FABRICATED FROM 1-1/4" DIAMETER STAINLESS STEEL OR ARCHITECTURAL BRONZE TUBING IN SATIN OR HIGHLY POLISHED FINISHES. STATUARY

BRONZE AND POWDER COATED FINISHES ALSO AVAILABLE

10-1

/2"

36"- 4

2"

PANIC DEVICE H-100A

2-5/8"

PANIC DEVICE H-100A WITH KEY CYLINDER

PANIC DEVICE H-100A WITHOUT

KEY CYLINDER

SECTIONS

DEADBOLT LOCK HOUSING

DB-100A


DB-100A WITH KEY CYLINDERS

H-100A PANIC DEVICE (SHOWN)The top latchbolt is retracted by pushing the interior“L” shaped crash bar. A conveniently located built-indogging device keeps the latchbolt in the retractedposition and the crash bar becomes fi xed. Exteriorkey cylinder for entry is optional. For electric strikeapplications see pages D30 and D31.

DB-100A DEADBOLT HOUSING (SHOWN)The upper deadbolt is operated by key cylinders onboth sides or with an interior thumbturn.

DH-100A DUMMY HANDLEThis matches the H-100A panic device and the DB-100A deadbolt, but has no locking mechanism.

NOTE: For a variety of exterior fi xed pull handles, see pages D28 and D29

FOR TEMPERED GLASS DOORS OVER 8'6" TALL,CONTACT BLUMCRAFT

INTERIOR OPERATING PANIC DEVICE H-100OR FIXED DEADBOLT HOUSING DB-100

EXTERIOR FIXED PULL HANDLE STYLE “A”

0530_19.indd 190530_19.indd 19 10/15/07 8:17:03 AM10/15/07 8:17:03 AM

20D

4-1/8"



36

"- 4

2"

18-1

/2"

PANIC DEVICE H-100B WITH KEY CYLINDER

PANIC DEVICE H-100B WITHOUT

KEY CYLINDER

SECTIONS

DEADBOLT LOCK HOUSING DB-100B

WITH KEY CYLINDERS

10-1

/2"

2-5/8"



EXTERIOR FIXED PULL HANDLE STYLE “B”

H-100B PANIC DEVICE (SHOWN)The top latchbolt is retracted by pushing the interior“L” shaped crash bar. A conveniently located built-indogging device keeps the latchbolt in the retractedposition and the crash bar becomes fi xed. Exteriorkey cylinder for entry is optional. For electric strikeapplications see pages D30 and D31.

DB-100B DEADBOLT HOUSING (SHOWN)The upper deadbolt is operated by key cylinders onboth sides or with an interior thumbturn.

DH-100B DUMMY HANDLEThis matches the H-100B panic device and the DB-100B deadbolt, but has no locking mechanism.


FOR TEMPERED GLASS DOORS OVER 8'6" TALL,CONTACT BLUMCRAFT

0530_20.indd 200530_20.indd 20 10/15/07 8:17:28 AM10/15/07 8:17:28 AM

21D

4-1/8"


BRONZE AND POWDER COATED FINISHES ALSO AVAILABLE 3

6"- 4

2"

10-1

/2"

PANIC DEVICE H-100C WITH KEY CYLINDER

PANIC DEVICE H-100C WITHOUT

KEY CYLINDER

SECTIONS


DB-100C WITH KEY CYLINDERS

2-5/8"


H-100C PANIC DEVICE (SHOWN)The top latchbolt is retracted by pushing the interior“L” shaped crash bar. A conveniently located built-indogging device keeps the latchbolt in the retractedposition and the crash bar becomes fi xed. Exteriorkey cylinder for entry is optional. For electric strikeapplications see pages D30 and D31.

DB-100C DEADBOLT HOUSING (SHOWN)The upper deadbolt is operated by key cylinders onboth sides or with an interior thumbturn.

DH-100C DUMMY HANDLEThis matches the H-100C panic device and the DB-100C deadbolt, but has no locking mechanism.


EXTERIOR FIXED PULLHANDLE STYLE “C”

FOR TEMPERED GLASSDOORS OVER 8'6" TALL,CONTACT BLUMCRAFT

INTERIOR OPERATING PANICDEVICE H-100 OR FIXEDDEADBOLT HOUSING DB-100

0530_21.indd 210530_21.indd 21 10/15/07 8:17:51 AM10/15/07 8:17:51 AM

22D

4-1/8"



10-1

/2"

36

"- 4

2"

PANIC DEVICE H-100D WITH KEY CYLINDER

2-5/8"

PANIC DEVICE H-100D WITHOUT

KEY CYLINDER

SECTIONS

DEADBOLT LOCK HOUSING DB-100D

WITH KEY CYLINDERS



H-100D PANIC DEVICE (SHOWN)The top latchbolt is retracted by pushing the interior“L” shaped crash bar. A conveniently located built-indogging device keeps the latchbolt in the retractedposition and the crash bar becomes fi xed. Exteriorkey cylinder for entry is optional. For electric strikeapplications see pages D30 and D31.

DB-100D DEADBOLT HOUSING (SHOWN)The upper deadbolt is operated by key cylinders onboth sides or with an interior thumbturn.

DH-100D DUMMY HANDLEThis matches the H-100D panic device and the DB-100D deadbolt, but has no locking mechanism.


FOR TEMPERED GLASS DOORS

OVER 8'6" TALL,CONTACT

BLUMCRAFT

EXTERIOR FIXED PULL HANDLE STYLE “D”

0530_22.indd 220530_22.indd 22 10/15/07 8:18:13 AM10/15/07 8:18:13 AM

23

4-1/8"

36

"- 4

2"

PANIC DEVICE H-100F WITH KEY CYLINDER

2-5/8"

PANIC DEVICE H-100F WITHOUT

KEY CYLINDER

DEADBOLT LOCK HOUSING DB-100F

WITH KEY CYLINDERS

10-1

/2"

SECTIONS

D


H-100F PANIC DEVICE (SHOWN)The top latchbolt is retracted by pushing the interior“L” shaped crash bar. A conveniently located built-indogging device keeps the latchbolt in the retractedposition and the crash bar becomes fi xed. Exteriorkey cylinder for entry is optional. For electric strikeapplications see pages D30 and D31.

DB-100F DEADBOLT HOUSING (SHOWN)The upper deadbolt is operated by key cylinders onboth sides or with an interior thumbturn.

DH-100F DUMMY HANDLEThis matches the H-100F panic device and the DB-100F deadbolt, but has no locking mechanism.


HARDWARE IS FABRICATED FROM 1-1/4” DIAMETER STAINLESS STEEL OR ARCHITECTURAL BRONZE TUBING IN SATIN OR HIGHLY POLISHED FINISHES. STATUARY BRONZE AND POWDER COATED FINISHES ALSO AVAILABLE

EXTERIOR FIXED PULL HANDLES STYLE “F” WITH H-100 PANIC DEVICES MAY NOW BE USED ON 1/2” TEMPERED GLASS DOORS UP TO 9’-0” TALL. CRASH BAR MUST BE 42” FROM DOOR BOTTOM

EXTERIOR FIXED PULL HANDLE STYLE “F”


0530_23.indd 230530_23.indd 23 10/15/07 8:19:37 AM10/15/07 8:19:37 AM

24D

4-1/8"



36"- 4

2"

10

-1/

2"

PANIC DEVICE H-110A WITH KEY CYLINDER

1/

2"

MIN

.

PANIC DEVICE H-110A WITHOUT

KEY CYLINDER

SECTIONS

DEADBOLT LOCK HOUSING DB-110A

WITH KEY CYLINDERS

2-5/8"

RECESSED STRIKE S-110-R

FLOOR MOUNTED RAMP STRIKE S-110-F

THRESHOLD RAMP STRIKE S-110-T


H-110A PANIC DEVICE (SHOWN)The bottom latchbolt is retracted by pushing the interior inverted “L” shaped crash bar. A conveniently located built-in dogging device keeps the latchbolt in the retracted position and the crash bar becomes fi xed. Exterior key cylinder for entry is optional. Threshold is recommended. See pages D30 and D31.

DB-110A DEADBOLT HOUSING (SHOWN)The lower deadbolt is operated by key cylinders on both sides or with an interior thumbturn.

DH-110A DUMMY HANDLEThis matches the H-110A panic device and the DB-110A deadbolt, but has no locking mechanism.

FOR TEMPERED GLASS DOORSOVER 8'6" TALL, CONTACT BLUMCRAFT

CAUTION:THRESHOLD RAMP STRIKE IS RECOMMENDED.FLOOR MOUNTED RAMP STRIKECOULD BE A TRIPPING HAZARD.



EXTERIOR FIXED PULL HANDLE STYLE “A”

0530_24.indd 240530_24.indd 24 10/15/07 8:20:01 AM10/15/07 8:20:01 AM

25D


4-1/8"



36"- 4

2"

1

0"

RECESSED STRIKE S-110-R

FLOOR MOUNTED RAMP STRIKE

S-110-F

THRESHOLD RAMP STRIKE

S-110-T

PANIC DEVICE H-110B WITH KEY CYLINDER

1/

2"

MIN

. 10 -1

/2"

PANIC DEVICE H-110B WITHOUT

KEY CYLINDER

SECTIONS

DEADBOLT LOCK HOUSING DB-110B

WITH KEY CYLINDERS

2-5/8"

H-110B PANIC DEVICE (SHOWN)The bottom latchbolt is retracted by pushing the interior inverted “L” shaped crash bar. A conveniently located built-in dogging device keeps the latchbolt in the retracted position and the crash bar becomes fi xed. Exterior key cylinder for entry is optional. Threshold is recommended. See pages D30 and D31.

DB-110B DEADBOLT HOUSING (SHOWN)The lower deadbolt is operated by key cylinders on both sides or with an interior thumbturn.

DH-110B DUMMY HANDLEThis matches the H-110B panic device and the DB-110B deadbolt, but has no locking mechanism.

FOR TEMPERED GLASS DOORSOVER 8'6" TALL, CONTACT BLUMCRAFT


CAUTION:THRESHOLD RAMP STRIKE IS RECOMMENDED.FLOOR MOUNTED RAMP STRIKECOULD BE A TRIPPING HAZARD.


EXTERIOR FIXED PULL HANDLE STYLE “B”

0530_25.indd 250530_25.indd 25 10/15/07 8:20:29 AM10/15/07 8:20:29 AM

26D


4-1/8"



37

-11

/1

6"

STD

.

37

-11

/1

6"

STD

.

DB-130F DEADBOLT HOUSING WITH TOP AND BOTTOM BOLTS

DH-130F DUMMY HANDLE WITH NO

LOCKING MECHANISM

2-5/8"

DB-130F DEADBOLT HOUSING WITH TOP

LATCHBOLT ADAPTABLE FOR ELECTRIC STRIKE

EXTERIORFIXED PULLHANDLESTYLE “F”

DB-130-F DEADBOLTHOUSING (SHOWN)This versatile hardware can have top AND bottom bolts simultaneously operated by key cylinders on both sides or by interior thumbturn. Locking bolts also can be at TOP only or at BOTTOM only.

NEW DEVELOPMENTPatent Pending

Blumcraft’s top locking deadbolt hardware, DB-100, DB-130, DB-160, and DB-170 now has the capability of self-latching with key cylinders or thumbturns that spring-back when turned. This hardware is similar to the H-100 panic device except there is no crash bar for immediate exit. This new function allows entry or exit by key cylinders without the relocking requirement of previous models, i.e. the top bolt is always ready to re-latch into a standard strike or an electric strike. This hardware also incorporates a unique feature similar to a panic dogging device that can retract the top bolt and retain it, making the deadbolts ordinary push/pull handles. These deadbolts with the new feature are called DBL-100, DBL-130, DBL-160, and DBL-170 having the same look as the previous models. This hardware can be used in combination with Blumcraft exterior pull handles designated by letters. Local building codes should be reviewed for compliance. Contact Blumcraft for additional information.

DH-130F DUMMYHANDLE (SHOWN)This matches the DB-130F deadbolt but has no locking mechanism.


DB-130F DEADBOLT HOUSINGS ARE AVAILABLE 10” SHORTOF THE DOOR BOTTOM WITH A TOP BOLT ONLY

INTERIOR DEAD LOCK

HOUSINGDB-130

0530_26.indd 260530_26.indd 26 10/15/07 8:20:49 AM10/15/07 8:20:49 AM

27D


HARDWARE IS FABRICATED FROM 1-1/4" DIAMETER STAINLESS STEEL OR ARCHITECTURAL BRONZE TUBING IN SATIN OR HIGHLY POLISHED FINISHES. STATUARY BRONZE AND POWDER

COATED FINISHES ALSO AVAILABLE


DB-140-K-S

48"

11-1/8"

42" STD.


DB-150-P


DB-160-H


DB-170-J-S

37 -1/2" STD.

2-5/8"

42" STD.

DEADBOLT HOUSINGSDB-140-K-S AND DB-150-PMATCHING DUMMY HANDLESDH-140-K-S AND DH-150-P

WITHOUT LOCKING MECHANISMS

DEADBOLT HOUSINGSDB-160-H AND DB-170-J-SMATCHING DUMMY HANDLESDH-160-H AND DH-170-J-S

WITHOUT LOCKING MECHANISMS

ALL DEADBOLT HOUSINGS ARE OPERATED BY KEY CYLINDERSON BOTH SIDES OR WITH AN INTERIOR THUMBTURNINTERIOR

DB-160INTERIORDB-170

INTERIOR DB-140

EXTERIORPULL HANDLE“H”

EXTERIORPULL HANDLE“P”

EXTERIORPULL

HANDLE“K-S”

EXTERIORPULL

HANDLE“J-S”

NOTE: For a variety of exterior fi xed pull handles, see pages D28 and D29INTERIOR DB-150

0530_27.indd 270530_27.indd 27 10/15/07 8:21:40 AM10/15/07 8:21:40 AM

28D

INTERIOR PANIC DEVICES AND INTERIOR DEADBOLT

HOUSINGS

PANIC H-110

PANIC DEVICES OPERATING HANDLES ON INTERIOR SIDE OF DOOR

MAXIMUM DOOR HEIGHTS With Crash Bar at 42" High (H-100 Only) DOOR GLASS EXTERIOR HANDLES HEIGHT THICKNESS APPLICABLE 8'-6" 1/2" All 9'-0" 1/2" “F” Full Height 9'-0" 1/2" “F” 10" Short of Door Bottom 9'-0" 3/4" All

PANIC H-100

DEADBOLT LOCK HOUSINGS WITH LOCKING MECHANISM ON INTERIOR SIDE OF DOOR

DEADBOLT DB-160

DEADBOLT DB-170

DEADBOLT DB-150

DEADBOLT DB-140

DEADBOLT DB-100

DEADBOLT DB-110

DEADBOLT DB-130

H-1OO H-11O H-1OO H-110

ALL BLUMCRAFT HARDWARE APPLICABLE TO MOST TYPES OF DOORS INCLUDING:

• TEMPERED GLASS • WOOD • MEDIUM/WIDE STILE AND RAIL• BALANCED • HOLLOW METAL

PANIC DEVICES AND DEADBOLT HOUSINGS:Specify Operating Device/Housing and Pull Handle.Example: H-100-B, DB-160-J

DUMMY HANDLES:Specify Prefi x DH, Similar to Operating Device/Housing (Interior) and Pull Handle. Example: DH-130-K

PUSH/PULL HANDLES:Specify Prefi x PP, Interior Handle,Exterior Handle. Example: PP-B-E

Panic Devices, Deadbolt Housings and Dummy Handles Available in Stainless Steel or Architectural Bronze.

Push/Pull Handles Available inStainless Steel or Architectural Bronze.

0530_28.indd 280530_28.indd 28 10/15/07 8:22:05 AM10/15/07 8:22:05 AM

D29

EXTERIOR PUSH/PULL HANDLES FOR PANIC DEVICES

AND DEADBOLT HOUSINGS

HANDLE A HANDLE E HANDLE C HANDLE B HANDLE D

HANDLE F

HANDLE K-S

HANDLE J-S HANDLE J HANDLE K

HANDLE N HANDLE X HANDLE P HANDLE Y

HANDLE H

NOTE: THE EXTERIOR DOOR PUSH/PULL HANDLES ON THIS PAGE CAN BE USED WITH ANY INTERIOR PANIC DEVICE OR DEADBOLT HOUSING SHOWN ON PAGE D28. WITH OVER 140 COMBINATIONS AVAILABLE, THE ARCHITECT CAN SELECT FROM A WIDE VARIETY OF OPTIONS.

0530_29.indd 290530_29.indd 29 10/15/07 8:22:26 AM10/15/07 8:22:26 AM

30D

DOOR STOP/STRIKE FOR PAIR OF DOORS S-100-D

SINGLE DOOR S-100-S

PANIC DEVICE BOLT RAMP

5/16-18 SOCKET HEAD CAP SCREWS (TYPICAL)

ADJUSTABLE STOPS ADJUSTABLE STOPS

DOOR STOP/STRIKES FOR H-100 PANIC DEVICES

1-1/2"

3/4"

5-9/16" 5-9/16"

3/4"

8-3/8" STD.

12-7/8" 4-5/8"

2-3/4"

3/4" 1-1/2"

3/4"

ELECTRIC STRIKE APPLICATIONS

FOLGER ADAM 310-1 3/4" STRAIGHT KEEPER WITHOUT SIGNAL SWITCHES

DOOR STOP AND ELECTRIC STRIKE MOUNTING BAR FOR SINGLE DOOR

ES-100-S

DOOR STOP AND ELECTRIC STRIKE MOUNTING BAR FOR PAIR OF DOORS ES-100-D

5-5/8" 5-5/8" 5-5/8" 2-3/4"

1-1/8"

3/4"

8-3/8"

16-3/8"

1-1/8" 2"

8"

4" 1/4"

1/8" 1/8"

THE ES-100-D DOOR STOP/MOUNTING BAR IS ALSO AVAILABLE WITH AN ELECTRIC STRIKE ON ONLY ONE SIDE.

NOTE: DOORSTOP/STRIKES FOR DEADBOLT HOUSINGS ARE SIMILAR TO THE ABOVE, EXCEPT THAT THEY HAVE NO PANIC BOLT RAMP. MOUNTING HOLES ARE IDENTICAL.


2"

VARIES

2-1/8" CLAD

FINISHED CEILING

PANIC DEVICE H-100

2" F.O.G.

H-100 WITH ELECTRIC STRIKE

VARIES

FINISHED CEILING

PANIC DEVICE H-100

PANIC DEVICE H-100

H-100 WITH DOOR STOP/STRIKE

FINISHEDCEILING

S-100 DOOR/STOP STRIKE

2" F.O.D.

DOORS BY OTHERS

H-100 PANIC DEVICE APPLICATIONS

SHIMS 1-1/2"

1-3/32"

29/32"

1-1/2" 1-3/32"

2" F.O.G.

S-100 DOOR/STOP STRIKE

1-3/32"

SHIMS

ES-100 DOOR/STOP MOUNTING BAR

NOTE: SH-100 SWITCH HOUSINGS, WHILE SIMILAR IN APPEARANCE TO H-100 PANIC DEVICES, HAVE A SWITCHINGFUNCTION THAT ONLY OPERATES INDEPENDENT ELECTRIC LOCKS. THESE ELECTRIC LOCKS CAN BE ELECTROMAGNETIC,

DROP BOLTS, OR SHEAR LOCKS. CONTACT BLUMCRAFT WITH MODEL NUMBER OF SELECTED LOCK TO INSURE COMPATIBILTY.

0530_30.indd 300530_30.indd 30 10/15/07 8:22:51 AM10/15/07 8:22:51 AM

31D


MOUNTINGBLOCK

2" F.O.G.

16-3/4" STD.

4-1/8" STD.

FOLGER ADAM310-1 ONLYWITH 3/4"

STRAIGHT KEEPERAND WITHOUT

SIGNAL SWITCHES

TYPICAL DETAILAS INDICATED ON

PAGE D30.

B-1250TRANSOMBAR

2-11/16"

TYPICAL DOOR STOP AND ELECTRIC STRIKE CONDITION FOR FLOATING TRANSOM BAR

310-1-1 4-3/8" MIN.

MEDIUM/WIDE STILE DOORS

310-18-3/8" STD.

GLASS, WOOD, ANDHOLLOW METAL DOORS

H-110 PANIC DEVICE WITH THRESHOLD RAMP STRIKE

S-110-T

2"

PANIC DEVICE H-110

PANIC DEVICE H-110

H-110 PANIC DEVICE WITH FLOOR MOUNTED RAMP STRIKE

S-110-F

2"

5/8"

2-3/8" DIA.

1-3/8"

7/8"1-3/8"

7/8"

11/16" 7/16"

7/16"

9"

1/2"

1/16"

BEND TO SUIT 9/16"

STRIKES FOR H-110 PANIC DEVICES

FLOOR MOUNTED RAMP STRIKES-110-F

THRESHOLD RAMP STRIKE S-110-T

H-110 PANIC DEVICE APPLICATIONS

3/16" FIXED

11/16"

3/16" FIXED

3/4"

3/16" FIXED

FINISHEDFLOOR

DEADBOLT HOUSING

2"

DEADBOLT HOUSING WITH RECESSED FLOOR STRIKE S-110-R

RECESSED FLOOR STRIKE(DEADBOLT HOUSING ONLY)

S-110-R

1-1/4" DIA.

1-1/2"

STRIKE FORDEADBOLTHOUSINGS

DEADBOLT HOUSING APPLICATIONS

3/16 " FIXED

SH-100 SWITCH HOUSING(TO ACTUATE ELECTRIC LOCK)

METAL SHIMSAS REQUIRED

PARTIAL SECTION

NOTE: RAILS CAN BE ADAPTED FOR VARIOUS TYPES OFELECTROMAGNETIC LOCKS OR ELECTRIC DEADBOLTS,CONTACT BLUMCRAFT WITH MODEL NUMBER OFSELECTED LOCK TO INSURE COMPATIBILITY.

LINE OFSTRUCTUREABOVE

C-7501CEILINGCHANNELWITH FS-1SNAP-INFILLER STRIPS

ELECTRICDEADBOLT

MAGNETICCONTACTSWITCH

LOCALMOUNTING

BLOCK

ADJUSTABLEDOOR STOPACTUATING

MAGNET

SH-100SWITCH

HOUSING

1-3/4"

1-1/4"MIN.

1-1/8"FIXED

2"

1/8" MIN.

CAUTION: THRESHOLD RAMP STRIKE IS RECOMMENDED. FLOOR MOUNTED RAMP STRIKE COULD BE A TRIPPING HAZARD

0530_31.indd 310530_31.indd 31 10/15/07 8:23:11 AM10/15/07 8:23:11 AM

32D

11

-1/

2"

SCALE: 1-1/2" = 1'-0 "

7-1

/4

"

3-1/4"

3/4"

12" STANDARD

SPECIAL LENGTH AVAILABLE

3-3/4" D

ETER

MIN

ED B

Y H

EIG

HT

OF

DOOR

SIDE VIEW

1-5/8" O.D.

SCALE: 1-1/2" = 1'-0"

PUSH/PULLHANDLES

ALL HANDLES SHOWN ON PAGES D32 THROUGH D35 CAN BE ADAPTED TO GLASS, WOOD OR METAL DOORS AND ARE AVAILABLE IN THE FOLLOWING MATERIALS AND FINISHES:

ALUMINUM — SATIN CLEAR ANODIZED AND DARK BRONZE OR BLACK DURANODICSOLID BRONZE — SATIN OR HIGH BUFF LUSTRESTAINLESS STEEL — SATIN OR HIGH BUFF LUSTREWOOD — WALNUT OR OAK AS STANDARD – ALSO AVAILABLE IN OTHER WOOD SPECIES

P-710 STANDARD ALUMINUM PULL HANDLEWITH ATTACHED PUSH PLATE

HANDLE PORTION — STANDARD FINISH SATIN CLEAR ANODIZEDPUSH PLATE — STANDARD SATIN BLACK DURANODICALUMINUM PUSH PLATE ON OPPOSITE SIDE OF DOOR — STANDARD FINISH SATIN BLACK DURANODIC

P-722 FULL HEIGHTPUSH-PULL HANDLEBoth Sides of Door

0530_32.indd 320530_32.indd 32 10/15/07 8:23:38 AM10/15/07 8:23:38 AM

33D

PLAN

760W HANDLE

P-761W PUSH PLATE

FRONT VIEW

2"

3-1

/16"

1-1

/1

6"

11

-1/

2"

6"

30" STANDARD

ALSO AVAILABLE IN OTHER WIDTHS

FRONT VIEW

SIDE VIEW

3"

9"

3/4"

PUSH/PULLHANDLES

P-760 HANDLEALUMINUM, INCLUDING PULL — STANDARD FINISH SATIN CLEAR ANODIZED

P-761 PUSH PLATEOpposite Side of Door — ALUMINUM, EXCLUDING PULL — STANDARD FINISH SATIN CLEAR ANODIZED

P-760W HANDLEWOOD — STANDARD SOLID WALNUT OR OAK, ALSO AVAILABLE IN OTHER WOODS. ALUMINUM, INCLUDING PULL — STANDARD FINISH SATIN CLEAR ANODIZED

P-761W PUSH PLATEOpposite Side of Door — WOOD - STANDARD SOLID WALNUT OR OAK. ALSO AVAILABLE IN OTHER WOODS. ALUMINUM, EXCLUDING PULL — STANDARD FINISH SATIN CLEAR ANODIZED

P-740 HANDLEBoth Sides of Door

0530_33.indd 330530_33.indd 33 10/15/07 8:23:59 AM10/15/07 8:23:59 AM

34D

SIDE VIEW FRONT VIEW 1

3-1

/8

"

12

" 2-13/16" 1-1/8"

SIDE VIEW FRONT VIEW

2-3/4" 5"

METAL

SIDE VIEW FRONT VIEW

2-3/4" 5"

P-730W WOOD HANDLE

P-730 METAL HANDLE

SIDE VIEW

13

-1/

8"

12

"

FRONT VIEW

27-3/4" STANDARD ALSO AVAILABLE IN OTHER WIDTHS

2-13/16" 1-1/8" MIN.

13"

7" PLAN 1-7/8"

SCALE 1-1/2" = 1.0'

SIDE VIEW

5"

PUSH/PULLHANDLES

P-770AHANDLE

ALUMINUM-STANDARD

FINISHSATIN CLEAR

ANODIZED

P-752A HANDLE 1-1/8" DIA.Both Sides of Door

P-751A HANDLE - 1-1/8" DIA.Both Sides of Door

0530_34.indd 340530_34.indd 34 10/15/07 8:24:22 AM10/15/07 8:24:22 AM

35

10-1/8"

6-5/8"

VARIES

CH-800 CENTER HOUSING WITH ELECTRIC STRIKE

USED WITH ALL DOOR SERIES EXCEPT 250 SERIES DOOR

CH-800 CENTER HOUSING WITHLOCK FOR FRAME OR WALL MOUNTED ELECTRIC STRIKE

USED WITH ALL DOOR SERIES EXCEPT 250 SERIES DOOR

CH-800 CENTER HOUSING AND CH-802 STRIKE HOUSING

USED WITH SIDELIGHT AND ALL DOOR SERIES

EXCEPT 250 SERIES DOOR

CH-800 CENTER HOUSING AND CH-801 STRIKE HOUSING

USED WITH SIDELIGHT AND ALL DOOR SERIES

EXCEPT 250 SERIES DOOR

CENTER HOUSING ELECTRIC STRIKE ADAPTIONS

CENTER HOUSINGS

10-1/8"

6-5/8"

4-9/16" OR 6-5/8"

ADAPTABLE TO MOST DOOR SERIES

5-1/2"

3-1/8"

3-1/8"

D

LOCKINGHARDWARE

CENTER HOUSING INFORMATION AND SPECIFICATIONS

CH-800 center lock housings are designed to receive mortise latchlocks, mortise deadbolts, or combination latchlock/deadbolts manufactured by Russwin/Corbin, Schlage, Sargent or Best. (Others upon request).

Mortise locks come in a variety of functions such as “classroom,” “entrance”, “offi ce,” “apartment” and others. These locks can be operated by levers, cylinders, or thumbturns. A hold-back feature is optional. Pull handles are available.

To specify center housings, choose a lock manufacturer, lock function, lever or pull handle, fi nish, and whether electric strikes are required.

CH-800 and CH-802 strike housings are prepared to accept the specifi ed latchbolt or deadbolt. Strike housings can receive Folger Adam 310-1 electric strikes. A raceway connects the center housing and door or sidelight rail to carry wiring to a control station or card reader.

CH-801 full width strike housings are similar to CH-800 and CH-802 but are only mounted to sidelights. These housings internally carry wiring to a control station or card reader for electric strike applications, eliminating the need for vertical raceways.

CH-850 center housings are available with #7385-L deadlocks only. CH-851 center strike housings are avail-able to match the lock housing.

Caution:If center lock and strike housings are applied to a pair of doors, the one door becomes active. For security, the inactive door must be deadlocked. It is suggested that the doors be independently operated. Use of the panic and deadbolt hardware shown on the previous pages provides this convenience. Also, the same hard-ware has Underwriters Laboratories approval and is in compliance with the American with Disabilities Act (ADA).

CH-800 CENTER LOCK HOUSINGWITH P-751C PULL HANDLE

AND CH-801 STRIKE HOUSING

CH-800 CENTER LOCK HOUSINGWITH LEVER HANDLE AND

CH-800 STRIKE HOUSING (6-5/8")OR CH-802 STRIKE HOUSING (4-9/16")

FOR NARROW SIDELIGHT

CH-850 CENTER LOCK HOUSINGWITH 7385 DEAD LOCK

AND CH-851 STRIKE HOUSING

FINISHES Aluminum Clear Anodized, Satin or High Buff Luster, Medium or Dark Bronze Duranodic and Black Duranodic (satin fi nish only).Bronze 60/40 Satin US10, Polished US9, Statuary US10B.NOTE: Furnished not laquered. Contact Blumcraft for suggested maintenance.Stainless Steel Satin US32D, Polished US32

Mortise locks are generally supplied in satin or polished architectural bronze or stainless steel; statuary bronze is also available.

0530_35.indd 350530_35.indd 35 10/15/07 8:24:51 AM10/15/07 8:24:51 AM

LOCKINGHARDWARE

1352 STRIKE HOUSING

1351 CENTER HOUSING DEADBOLT LOCK

1-9/16" FOR 1/2" GLASS

1-13/16" FOR 3/4" GLASS

2-1/4"

3-5/16"

2-7/8"

1-9/16" FOR 1/2" GLASS 1-13/16" FOR3/4" GLASS

2-1/4"

1350 CORNER LOCK

THRU-GLASS LOCKS 3/4" THROW


AVAILABLE IN STAINLESS STEEL, BRONZE OR ALUMINUM IN A VARIETY OF FINISHES

7385

5/8" DIAMETER BOLT

3-5/16" 1" CASE 1-1/4" OVERALL

1-15/16"

3/4"

THIS BLUMCRAFT DEADLOCK HAS A 5/8" DIAMETER DROP BOLT WITH A 3/4" THROW THAT CAN ENGAGE INTO A STRIKE PLATE, THRESHOLD, OR DUST-PROOF STRIKE. THE 7385 LOCK CAN BE MOUNTED IN THE BLUMCRAFT 640C DOOR AND MOST TEMPERED GLASS DOORS. STANDARD MORTISE KEY CYLINDERS ARE HELD IN POSITION WITH SET SCREWS THAT ARE ACCESSIBLE FROM THE END OF THE DOOR RAIL.

36D

RAIL DEAD LOCKS

7385 L

1-1/4"

3-5/16"

1" CASE 1-1/4" OVERALL

1-15/16"

5/8" DIAMETER BOLT

THIS DEAD LOCK IS THE SAME AS THE STANDARD 7385 EXCEPT THAT IT HAS A FULL 1-1/4" THROW. THE ADDITIONAL ENGAGEMENT CAN ACCOMMODATE CLEARANCES UP TO 11/16" OR SPECIAL FLOOR CONDITIONS.

7"

7350 ROLLING LOCK

1-15/16"

7/8"

THIS BLUMCRAFT DEADLOCK HAS A CYLINDRICALLY SHAPED BOLT THAT ROLLS RATHER THAN SLIDES. ROLLING REDUCES THE CONTACT AREA SURROUNDING THE BOLT AND THE POSSIBILITY OF FREEZING IN AN OPEN OR CLOSED POSITION. WHEN LOCKED, THE BOLT BECOMES VERY DIFFICULT TO DAMAGE BECAUSE IT REVOLVES ON ITS OWN AXIS. BALL BEARINGS SMOOTH OUT THE OPERATION OF ALL STAINLESS STEEL MOVING PARTS. SIX PIN MORTISE CYLINDERS ARE STANDARD AND CAN BE KEYED ALIKE OR KEYED SEPARATELY.

0530_36.indd 360530_36.indd 36 10/15/07 8:25:17 AM10/15/07 8:25:17 AM

SUGGESTED GUIDELINES

D 37

TEMPERED GLASS DOORS Shall be Blumcraft Series _____in strict accordance with the following:

GLASS Shall be 1/2” thick fully tempered clear, solarbronze or solargray, 3/4” thickness available in clear only.

SERIES 1301 DOOR Top and bottom rails shall be 3/4” high architec-tural bronze or stainless steel. Must be used with Blumcraft ceiling chan-nel or transom bar where the top pivot receptacles are recessed and adjustable. Walking beam top pivots are applicable. Contact Blumcraft for this special application. Special removable spindle fi ts Dorma BTS-80 fl oor closers. When overhead closers are used, a circular adapter fi ts the closer pintel. Recessed bottom pivot is BP-13.

SERIES 250 DOORS Horizontal top and bottom rails shall be of solid aluminum sections 1-1/4” thick for 1/2” glass or 1-1/2” thick for 3/4” glass to size and shape as detailed. Vertical stiles shall be the exact shape and size to match the rails. These stiles shall be bonded to the glass in Blumcraft’s factory. Hollow shapes or channel sections will not be accept-able. These rails shall contain adjustable top and bottom pivot blocks with adapters to fi t operating fl oor checks specifi ed. These blocks are to be solid and built to the dimensions as detailed. The pivot blocks shall have adjustable features for alignment of door. These shall have removable cover plates to hide adjustment screws. When overhead closers are used, the bottom pivot block shall contain a heavy duty tapered roller bearing which shall be adjustable in height. The upper pivot block shall contain an adjustable pivot arm to fi t the pintel of the specifi ed overhead closer.

WEATHERSTRIPPING Can be applied to edges of glass or in Series 250 vertical stiles. The weatherstripping shall be pile and replaceable without removing doors from the opening.

SIDELIGHTS Typically have top/bottom rails to match doors. Sidelights can be recessed into ceiling or base channels for an all glass look.

DEADBOLT LOCK HOUSINGS Shall be Blumcraft DB-100, DB-110, DB-130, DB-140, DB-150, DB-160, or DB-170 with interior fi xed handle and any of the fi xed exterior pull handles designated by letters. Operating mechanism shall be concealed within the 1-1/4” diameter architectural bronze or stainless steel tubing. There shall be a keyed cylinder on both sides or a thumbturn on the interior side where indicated. The locking mechanism shall be on the interior side of the door.

CONCEALED PANIC DEVICES Panic device shall be 1-1/4” diameter Blumcraft H-100 or H-110 with interior operating panic handle in combination with exterior fi xed pull handles designated by letters. Panic mechanism shall be concealed within the architectural bronze or stainless steel tubing. Entrance from exterior by key cylinder is optional.

ELECTRIC STRIKES Shall be Folger Adam 310-1 with 3/4” straight keeper without signal switches using H-100 Panic Housings. Electric strikes are mounted in the header or transom bar.

FLOATING TRANSOM BAR Shall be B-1250 made of solid steel and clad to match the specifi ed fi nish. B-1250 transom bars have both vertical and lateral adjustments. Installation is accomplished by stainless steel support rods hanging from ceiling channels and pressure pads to the sidelight glass.

FINISHES

Aluminum: Clear Anodized, Satin or High Buff Luster,Medium or Dark Bronze Duranodic and Black Duranodic (satin fi nish only). Painted and powder coated fi nishes available on request.

Bronze 60/40: Satin US10, Polished US9, Statuary US10BNOTE: Furnished not lacquered. Contact Blumcraft for suggested maintenance.

Stainless Steel: Satin US32D, Polished US32.

FLOOR AND OVERHEAD CLOSERS Since size, weight, usage, and windload are factors affecting the operation of doors, Blumcraft generally recommends center-pivoted fl oor closers for all tempered glass doors. Blumcraft does not recommend overhead closers for general exterior use nor for large doors or doors made of excessively heavy glass or hardware. Selection of closers should be determined by the Architect with hardware consultant. Blumcraft can adapt for the following closers:

OVERHEAD FLOOR CLOSERS CLOSERS

RIXSON 26, 28, 30, 40, 5013-15, 5023-25 608, 700, 800

DORMA BTS-75V, BTS-80 RTS-88

JACKSON 900 20-330

NOTE: If a positive stop is required, specify “auxiliary stop to be applied at the fl oor, header or wall at or near the leading edge of the door.”

Contact Blumcraft with manufacturer and model number of other closers to insure compatibility.

For AUTOMATIC OPERATORS refer to Page D10.

CONSTRUCTION AND TESTING Door shall be completely built with top and bottom rails bonded to glass. Vertical lock housings, panic, push/pull hardware and cylinders shall be applied to doors. All bonding of metal to glass with application of lock housings, panics, hardware and cylinders must be done in Blumcraft’s factory under controlled conditions. Each door shall be physically tested in Blumcraft’s factory for all functions, made ready for installation.

INSTALLATION Shall be made in accordance with manufacturer’s recommendations. Door framing, jambs and thresholds shall be rigidly set square and plumb. Clearances between the doors, header, jamb and threshold shall be as recommended by door manufacturer. Pivot blocks at top and bottom of doors shall be properly aligned by internal adjust-ments before placing strike plates in fl oor, threshold and header. The installation contractor shall be fully responsible for properly aligning and setting the doors/sidelights all in accordance with Blumcraft’s instruction sheets included with each shipment.

PROTECTION During and after installation the general contractor shall pro-vide adequate protection against stains and damage during construction.

SHOP DRAWINGS Shall be prepared by Blumcraft’s engineering staff.

SPECIFICATIONS

For most purposes, door heights should be limited to:EXTERIOR USE — 8’-0” For 1/2” Glass Thickness — 8’-6” For 3/4” Glass ThicknessINTERIOR USE — 8’-6” For 1/2” Glass Thickness — 9’-0” For 3/4” Glass Thickness

Since increased sizes make the doors heavier and more fl exible, consider these guidelines:• Windload, Stack Action and Ventilation Loads• Panic Devices, Deadbolt Locks or other Hardware • Mounting Conditions of Doors to Building Structure • Floor Closer or Overhead Closer Characteristics • Heavy Usage and Frequency of Operation • Comfortable Feel of the Door During Operation

Final Determination Should be Made by the Architect’s Structural Engineer

NOTE: For very tall doors up to 12’-0” high, we suggest using Blumcraft’s 1200 Series Door with the glass only 1/2” Thick

0530_37.indd 370530_37.indd 37 10/15/07 8:25:38 AM10/15/07 8:25:38 AM

D38

FOR INFORMATION ON DISPLAY CASE DOORS, REFER TO BLUMCRAFT CATALOG D-2008,SEE SWEETS FILE 12 35 59/BLU, OR VISIT OUR WEBSITE AT www.blumcraft.com

0530_38.indd 380530_38.indd 38 10/15/07 8:26:13 AM10/15/07 8:26:13 AM

FOR INFORMATION ON RAILINGS, REFER TO BLUMCRAFT CATALOG M-2008, SEE SWEETS FILE 05 73 00/BLU, OR VISIT OUR WEBSITE AT www.blumcraft.com

39D

0530_39.indd 390530_39.indd 39 10/15/07 8:26:40 AM10/15/07 8:26:40 AM

LOUVREParis, France

AIGHicksville, NY

RADISSON WAIKIKIPRINCE KUHIOHOTELHonolulu, HI

ASIAN ARTMUSEUMSan Francisco, CA

METROPOLITANMUSEUM OF ARTNew York, NY

DEPARTMENT OFHOMELANDSECURITYNew York, NY

NELSON ATKINS MUSEUMKansas City, MO

NEW YORK HISTORICAL SOCIETYNew York, NY

ONE SYMPHONYCENTERAtlanta, GA

HARVARDUNIVERSITYCambridge, MA

MILWAUKEEART MUSEUMMilwaukee, WI

SUPREME COURTJerusalem, Israel

BLOOMBERGNew York, NY

165 CHARLESSTREETNew York, NY

DELOITTE HEADQUARTERSChicago, IL

INSTITUTE FOR THE STUDY OF THE ANCIENT WORLDNew York, NY

CANADIANEMBASSYRiyadh, Saudi Arabia

WELLESLEYCOLLEGEWellesley, MA

STONY BROOKUNIVERSITYHOSPITALStony Brook, NY

PURDUEUNIVERSITYWest Lafayette, IN

RITZ CARLTONNew York, NY

JAMES GALLERYPittsburgh, PA

NEWSEUMWashington, DC

ROCHESTERINTERNATIONALAIRPORTRochester, NY

CANARY WHARFLondon, England

CALVIN KLEINDubai, UAE

VANDERBILTMUSEUMCenterpoint, NY

BLOOMINGDALE’SNew York, NY

IBMToronto, Ontario

BANK ONEHEADQUARTERSChicago, IL

YALE UNIVERSITYNew Haven, CT

DUPONTWilmington, DE

MT. VERNONVISITOR’S CENTERMt. Vernon, NY

WOLFGANG PUCK-THE BORGATA NORTHAtlantic City, NJ

NATIONALBASEBALLHALL OF FAMECooperstown, NY

PFIZERNew York, NY

CHEVRON PARKSan Ramon, CA

SCOTTTECHNOLOGYCENTEROmaha, NE

MERCKRahway, NJ

BAYERCORPORATIONPittsburgh, PA

PERFORMING ARTSSt. Louis, MO

OVER 80,000 BLUMCRAFT INSTALLATIONS CAN BE FOUND IN SOME OF THEMOST PRESTIGIOUS BUILDINGS THROUGHOUT THE WORLD. THE FOLLOWING

IS A PARTIAL LISTING OF NOTABLE PROJECTS WHERE BLUMCRAFTENTRANCE DOORS AND HARDWARE HAVE BEEN INSTALLED.

460 MELWOOD AVENUE • PITTSBURGH, PA 15213-1195TELEPHONE 412-681-2400 • FAX 412-681-6840

E-mail (general inquiries for quick response): [email protected] E-mail (for drawings/engineering department): [email protected]

Visit our website at www.blumcraft.com

08 41 00/BLUBuyline 0530

BLUMCRAFT’S ORIGINAL DESIGNS AND STRUCTURES ARE COVERED BY PATENTS AND PENDING APPLICATIONS INCLUDING THE FOLLOWING UNITED STATES PATENTS:

D444,241 • D355,037 • 5,283,978 • 4,956,954 • 4,895,3994,793,115 • 4,711,480 • 4,688,406 • 4,680,903

0530_40.indd 400530_40.indd 40 10/15/07 8:27:06 AM10/15/07 8:27:06 AM

Documents

B-2008sweets.construction.com/swts_content_files/2647/0530_084100-BLU_08.pdfskilled craftsman whose forte was hand-forged decorative wrought iron railings, gates, ... DEADLOCK HOUSING