How does it work?Inside Auto taps electronic taps, infrared light is released outward, reflecting off the user and bouncing back to a receiver. The computer circuitry coordinates the information and set the appropriate response. Transforming electrical energy into motion, the solenoid physically starts and stops the water flow. Auto taps products use solenoid valves. The solenoid valve is initially energized to start the water flow; the plunger is driven into the range of a permanent magnet which in turn holds the plunger in the "open" position. In order to return the plunger into its original position.

When the sensor senses the presence anybody in front of the tap and sends a signal to the solenoid valve to initiate the flow of water. When the object is no longer present, the infrared unit sends an electronic signal to the solenoid valve again to terminate the flow of water usually after few seconds.

What are the benefits of using auto taps?1-Saving Water for a Sustainable Feature:

Water is no longer the inexpensive commodity it use to be and our water bills are a testament to this fact. Continuous and unrestricted flow of water though a faucet when is not being used, is the main reason behind this water waste. With Auto Tap, you can conveniently turn on and off the faucet as you need when you need, preventing any wasting of water.

2-Saving energy and money:

Each time we use hot water, simultaneously cold water enters the heater where it is automatically heated by a costly source of energy. The more we waste hot water the greater our energy bill will be. Since most washing is done with hot water, Auto Tap hands free faucet can save you money by preventing heated water needlessly going down the drain.

3-Auto Tap keeps our hand clean from germs :

Turning on and off a faucet with wet hands is a common practice that always leaves us a lot of germs in our hands, by using auto taps can significantly reduce the chance of cross contamination and the spread of germs and

illnesses .