2
Automatic Load Control Relay (Power Pack) ETC ® 1 of 2 Emergency Power Series GENERAL INFORMATION The Automatic Load Control Relay (ALCR) is a UL 924 Listed emergency device that is powered from an always-available normal/ emergency source fed by an upstream emergency transfer switch. The ALCR provides power to emergency lighting load(s) by bypassing switches or other controls upon loss of utility power and ensuring a “lights-on state” during loss of normal power while tracking the state of normal lighting loads during normal operation. APPLICATIONS Conference Centers Hotels Dorms Office buildings Government buildings Restaurants Schools Houses of worship Theaters FEATURES 120V and 277V power systems Automatically activates lighting upon loss of normal power Provides remote activation by dry contact closure for connection to a fire alarm or building management system Configurable “return-to-normal” delay of 0-15 minutes Simple installation; fitted with a 1/2” nipple for permanent installation directly to an electrical junction box Maintenance-free ORDERING INFORMATION Unison Aero ® Relay Controller Sensor MODEL DESCRIPTION ALCR-PP Automatic Load Control Relay (Power Pack) SPECIFICATIONS GENERAL UL 924 Listed UL 2043 plenum rated FUNCTIONAL Automatic control of emergency power output to fixture or single-zone emergency lighting upon loss of normal power Supports fire alarm input activation of emergency power output Configurable return to normal delay settings of instant, 10 seconds, 30 seconds, 10 minutes, or 15 minutes MECHANICAL 1/2” conduit knockout mounted Constructed of UL 94 V-0 approved injection-molded ABS Remote and status LEDs Two buttons shall be available to select optional return to normal delay and output test ELECTRICAL 120/277 VAC, 60Hz power input Normally closed (NC), 20A fully-rated relay 2 LEDs: - Red: Power (steady when active) - Green: Learn (blinks when active) 12 AWG emergency power in and out wires on flying leads 18 AWG sense and switch wires on flying lead Remote activation switch can be located up to 1000 feet from ALCR THERMAL Ambient room temperature: -10 to 45°C / 14 to 113°F Ambient humidity: 5 to 95% non-condensing

Automatic Load Control Relay (Power Pack)ETC® Automatic Load Control Relay (Power Pack) 1 of 2 Emergency Power Series General InformatIon the automatic load Control relay (alCr) is

  • Upload
    others

  • View
    14

  • Download
    0

Embed Size (px)

Citation preview

Automatic Load Control Relay (Power Pack)ETC®

1 of 2

Emergency Power Series

G e n e r a l I n f o r m a t I o n

the automatic load Control relay (alCr) is a Ul 924 listed emergency device that is powered from an always-available normal/emergency source fed by an upstream emergency transfer switch. the alCr provides power to emergency lighting load(s) by bypassing switches or other controls upon loss of utility power and ensuring a “lights-on state” during loss of normal power while tracking the state of normal lighting loads during normal operation.

APPLICATIONS• Conference Centers• Hotels• Dorms• office buildings• Government buildings• restaurants• Schools• Houses of worship• theaters

FEATURES• 120V and 277V power systems• automatically activates lighting upon loss of normal power• Provides remote activation by dry contact closure for connection to a fire alarm or building management system• Configurable “return-to-normal” delay of 0-15 minutes • Simple installation; fitted with a 1/2” nipple for permanent installation directly to an electrical junction box• maintenance-free

o r D e r I n G I n f o r m a t I o n

Unison Aero® Relay Controller SensorMOdEL dESCRIPTION

alCr-PP automatic load Control relay (Power Pack)

S P e C I f I C a t I o n S

GENERAL• Ul 924 listed• Ul 2043 plenum rated

FUNCTIONAL• automatic control of emergency power output to fixture or single-zone emergency lighting upon loss of normal power• Supports fire alarm input activation of emergency

power output• Configurable return to normal delay settings of instant, 10 seconds, 30 seconds, 10 minutes, or 15 minutes

MEChANICAL• 1/2” conduit knockout mounted• Constructed of Ul 94 V-0 approved injection-molded aBS• remote and status leDs• two buttons shall be available to select optional return to normal delay and output test

ELECTRICAL• 120/277 VaC, 60Hz power input• normally closed (nC), 20a fully-rated relay• 2 leDs:

- red: Power (steady when active) - Green: learn (blinks when active)

• 12 aWG emergency power in and out wires on flying leads• 18 aWG sense and switch wires on flying lead• remote activation switch can be located up to 1000 feet from alCr

ThERMAL • ambient room temperature: -10 to 45°C / 14 to 113°f• ambient humidity: 5 to 95% non-condensing

Automatic Load Control Relay (Power Pack)ETC®

2 of 2

Emergency Power Series

Corporate headquarters•3031PleasantViewRd,POBox620979,MiddletonWI535620979USA•Tel+16088314116•Fax+16088361736London, UK•Unit26-28,VictoriaIndustrialEstate,VictoriaRoad,LondonW36UU,UK•Tel+44(0)2088961000•Fax+44(0)2088962000Rome, IT•ViaPieveTorina,48,00156Rome,Italy•Tel+39(06)32111683•Fax+44(0)2087528486holzkirchen, dE•Ohmstrasse3,83607Holzkirchen,Germany•Tel+49(8024)4700-0•Fax+49(8024)4700-300hong Kong•Room1801,18/F,Tower1Phase1,EnterpriseSquare,9SheungYuetRoad,KowloonBay,Kowloon,HongKong•Tel+85227991220•Fax+85227999325Web•www.etcconnect.com•Copyright©2014ETC.AllRightsReserved.Allproductinformationandspecificationssubjecttochange.7180L1046Rev.AUSA01/14

P H Y S I C A L

Unison Aero® Relay Controller dimensions*

MOdEL hEIGhT WIdTh dEPTh

inches mm inches mm inches mm

alCr-PP 1.93 50 3.60 92 1.96 50

Unison Aero Relay Controller Weights*

MOdEL WEIGhT ShIPPING WEIGhT

ounces grams ounces grams

alCr-PP 14.0 397 15.2 431

*Weights and dimensions typical

3.60”92mm

1.96”50mm

1.93”50mm

Normal Light Fixture

Emergency Light Fixture

ALCR

Dimmer Neutral (White)

Dimmer Hot Feed

Emergency LoadEmergency Hot

Emergency Neutral (White)

Dimmer Control with D20FB • When normal power is present, normal fixture(s) dim and emergency fixture(s) remain off • When normal power is lost or dimmer circuit breaker trips, emergency fixture(s) turns on

Dimmed CircuitETC D20FB module in Sensor or

Unison Dimmer Rack

Emergency Light Fixture

ALCR

Normal Neutral (White)

Normal Hot (Black)

Emergency LoadEmergency Hot

Emergency Neutral (White)

Backup Arrangement • When normal power is present, the emergency load is turned off • When normal power is lost, the emergency load turns on

Emergency Light Fixture

Normal Neutral (White)

Normal Hot (Black) Normal Switch(Red)

Emergency LoadEmergency Hot

Emergency Neutral (White)

ALCR

Normal Light Fixture

Switch Control Arrangement • When normal power is present, switch controls both the normal and emergency light fixtures • When normal power is lost, the emergency light fixture(s) turn on regardless of the switch state

NORMAL SWITCH SENSE (RED) 18 AWG

NORMAL NEUTRAL (WHITE 18 AWG)

NORMALLY CLOSED: TEST SWITCH

FIRE ALARM PANEL

SECURITY SYSTEM

NORMAL POWER SENSE (BLACK 18 AWG)EMERGENCY POWER IN (BLACK 12 AWG)

EMERGENCY POWER OUT

(RED 12 AWG)

EMERGENCY NEUTRAL (GRAY 18 AWG)

AUTOMATED LOAD CONTROL RELAY

(ALCR-PP)

RemoteLED

StatusLED

OptionButton