AMADA VIPROS 358 KING CNC FMS TURRET PUNCH CELL

CNC

ULTRA CLEAN HIGH TECH FABRICATING FACILITYFeaturing: Trumpf & Amada Machines including CNC FMF Punch Cell & CNC Punches as new as 2004, Laser and (9) Press Brakes;

Mori Seiki CNC Vertical Machining Center; Haeger Hardware Insertion Presses; Notcher; Bandsaw; Lathe; Tool Grinder; (21) Miller Tig & Mig Welding Machines as new as 2007; Heller PC Board Reflow Oven; Torit Dust Collection Systems;

Cantilever Storage Racks; Shop Support Equip.; Office Furniture; More!

Read Partial Terms & Conditions

on Back Page of Brochure

AUCTION

On-Site Bidding in Plano, Texas or Bid Via Webcast at

Headquarters:2901 W. Sam Houston Pkwy. N., Suite A-130

Houston, TX 77043

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

Bob Braman TX LIC. #6362Ron Moore TX LIC. #7314

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

At the Premises of

FLEXTRONICS INTERNATIONAL

640 Shiloh Rd., Bldg. 2PLANO, TEXAS 75074(See Directions on Back Page)

AUCTION: WED., MARCH 27 10:00 A.M.

INSPECTION: Tuesday, March 26, 9:00 A.M. to 4:00 P.M. & Morning of Sale

Safety glasses will be required

BUYER’S PREMIUM: 13% ONSITE •16% WEBCAST

AMADA 146 T. CAP. MDL. FE-130-4S CNC PRESS BRAKE

CNC

AMADA LASMAC 2415-II , 2,000 WATT CNC LASER

CNC

TRUMPF 25 T. CAP. MDL. TC-5000R CNC PUNCH

CNC

2004

1998

AMADA VIPROS MDL. 368 KING II CNC TURRET PUNCH

CNC

2000

2000

2 3

CNC TURRET PUNCHAMADA VIPROS MDL. 368 KING II, new 2000, 33 T. cap., Fanuc Series 18P CNC control, 58--station turret, (4) auto. index stations, 60" x 78.74" max. sheet size, brush tbl., .125" max. material thickness, 3,150 IPM max. positioning spd., Servo hyd. punch head, auto. sheet repositioning, S/N 36840134.

AMADA ROBOTIC SHEET LOADER

AMADA MP1530, new 2000, auto. load/unload single shelf loading system, 60" x 120" max. sheet size, 27.5" x 11.8" minimum sheet size, .24 gauge to 1/4" sheet thick-ness range, 5,500 lb. material cart weight cap., (2) pallets for material and finished parts, S/N A1530020.

<TRUMPF 25 T. CAP. MDL. TC-5000R CNC PUNCH

TRUMPF 20 T. CAP. MDL. TC-2020R CNC PUNCH

CNC

CNC

CNC

CNC

2004

2000

2004

2000

CNC PUNCHES25 T. CAP. TRUMPF TC5000R, new 2004, Siemens “Sinumeric” 840D CNC, .31" max. sheet thickness, 50" x 100" table travel, 1,200 strokes/min. max. punch-ing spd., 4,000 IPM X-axis spd., 2340 IPM Y-axis spd., 4,600 IPM simultaneous, 18-station linear tool magazine, punch head rotation, (3) work clamps, multi-tool option, 20" x 20" programmable part chute, S/N A0060A0363.

20 T. CAP. TRUMPF TC2020R, new 2004, Bosch Type 3 CNC, .25" max. sheet thickness, 50" x 100" tbl. travel, 900 strokes/min. max. punching spd., 3,600 IPM X-axis spd., 2,400 IPM Y-Axis spd., 4,300 IPM simulta-neous, 18-station linear tool magazine, Punch Head Rotation, (3) work clamps, multi-tool option, 8" x 8" programmable part chute, S/N A0030A0208.

At the Premises of

FLEXTRONICS INTERNATIONAL

640 Shiloh Rd., Bldg. 2PLANO, TEXAS 75074(See Directions on Back Page)

AUCTION

2 3

AMADA VIPROS 358 KING CNC FMS TURRET PUNCH CELL

AMADA ULH-410 UNLOADER

AMADA AS4410H SHEET TOWER

PARTIAL VIEW OF TURRET PRESS TOOLING

A WIDE ASSORTMENT OF AMADA TURRET PRESS TOOL-ING IN SORTED RACKS AND ROLLER-DRAWER CABI-NETS WILL BE OFFERED FOLLOWING THIS MACHINE.

AMADA CNC FMS PUNCH CELL33 T. CAP. AMADA VIPROS 358 “KING-II”, new 1998, Fanuc 18P CNC, 58-station thick turret, (4) auto index-stations (2) 1.25", (2) 4.5", 50" x 78.74" tbl. travel, brush tbl., .125" max. sheet thickness, 3,150 IPM max. positioning spd., Servo hydraulic punch head, auto sheet repositioning, S/N 38540016, OFFERED WITH THE FOLLOWING AUTOMATION COMPONENTS: Amada AS4410H material storage and load system, (4) shelf, 2 T. per shelf load, S/N A641023, Amada UL410H material unload system, S/N U410033.

CNC

AMADA VIPROS 358 KING CNC TURRET PRESS

CNC

1998

4 5

CNC LASERAMADA PULSAR 2415II, new 1996, Fanuc 16L CNC, 60" x 96" tbl. travel, Fanuc C2000B, 2,000 watt laser resonator (49,881 Hrs.), Turbo replaced at 48,682 hours, .5" max. cap. (mild steel), .375" max. cap. (stainless), 2,362 IPM max. spd., Kool-ant Kooler chiller, Torit dust collector, S/N 2415165.

CNC PRESS BRAKES146 T. CAP. AMADA MDL. HFE-130-4S, new 2000, Operateur 8-axis CNC, 14'2" max. bend length, 12'4" btwn. housings, 7.8" stroke, 18.5" open height, 16.5" throat, 5-axis back gauge, 2-axis down acting ram, 22 HP, electric foot switch control, S/N N-001113.138 T. CAP. AMADA MDL. HFB-125-40, new 1998, Operateur 8-axis CNC, 14'2" max. bend length, 12’4" btwn. housings, 7.8" stroke, 17.7" open height, 16.1" throat, 5-axis back gauge, 2-axis down-acting ram, bed crowning, 22 HP, electric foot switch control, S/N H980221.138 T. CAP. AMADA MDL. FBD III-1253, new 1999, AMNC-PC 8-axis CNC, 118" max. bend length, 106" btwn. housings, 5.91" stroke, 16.35" open height, 15.76" throat, 5-axis back gauge, 2-axis up-acting lower beam, bed crowning, 15 HP, electric foot switch and full length treadle control, S/N 12530069.(3) 110 T. CAP. AMADA MDL. RG100, NC9-EXII 3-axis CNC, 118.2" max. bend length, 100.5" btwn. housings, 3.94" stroke, 14.58" open height, 15.76" throat, 2-axis back gauge, 1-axis up-acting bed, 10 HP, full length treadle control, S/N 105487 (2000), S/N 105643 (1997), S/N 105302 (1995).

CNC

AMADA 146 T. CAP. MDL. FE-130-4S CNC PRESS BRAKE

CNC

AMADA 138 T. CAP. MDL. FBD-III-1253 CNC PRESS BRAKE

CNC(1 OF 3) AMADA 110 T. CAP. MDL. RG-100 CNC PRESS BRAKES

CNC

1999

2000

20003

AVAILABLE

88 T. CAP. AMADA MDL. RG80, new 1995, NC9-EXII 3-axis CNC, 98.7" max. bend length, 80.8" btwn. housings, 3.9" stroke, 14.58" open height, 15.75" throat, 2-axis back gauge, 1-axis up-acting bed, 7.5 HP, full length treadle control, S/N 810685.

AUCTION: WEDNESDAY MARCH 27 • 10:00 A.M.

On-Site Bidding in Plano, Texas or Bid Via Webcast at

4 5

HAEGAR MDL. 8-24 "PLUS" HARDWARE PRESS

PARTIAL VIEW OF PRECISION GROUND PRESS BRAKE TOOLING

HAEGAR MDL.HP-6B HARDWARE PRESS

ADIRA CORNER NOTCHING MACHINE

DOALL MDL. C-916SA AUTOMATIC MITERING HORIZONTAL BANDSAW

AMADA TOOL GRINDER

(2) 55 T. CAP. AMADA MDL. RG50, NC9-EXII 3-Axis CNC, 82.1" max. bend length, 59.9" btwn. housings, 3.9" stroke, 14.58" open height, 15.75" throat, 2-axis back gauge, 1-axis up-acting bed, 5 HP, full length treadle control, S/N 509752 (2000), S/N 509697 (1999).A LARGE AND VARIED SELECTION OF PRECISION GROUND PRESS BRAKE TOOLING WILL BE OFFERED FOLLOWING THESE MACHINES.

MISCELLANEOUS FABRICATING MACHINERY

ADIRA MDL. MC-0420 HYDRAULIC NOTCHER, 4 gauge (6mm) x 8" cap. mild steel, S/N 46-3198.

DOALL MDL. C-916-SA AUTO. HORI-ZONTAL BANDSAW, new 1995, 10-3/4" round cap., 9" x 16" rectangular cap., 1" blade, 1" to 40" index lgth., swivel miter head, S/N 508-95128.

AMADA MDL. 1B BENCH TYPE TOOL GRINDER, S/N 1B4154.

SEVERAL BELT AND DISC GRINDERS.

FAMCO ARBOR PRESS.

ALMCO 3 CU. FT. VIBRATORY DE-BURRING MACHINE, S/N 704662.

DIACRO HAND NOTCHING MACHINE.

HARDWARE PRESSESHAEGER MDL. 8-24 “PLUS”, new 1999, 8 T. cap., 24" throat depth, vibra-tory bowl feeder, electric foot switch control, S/N 8PL10514.

(2) HAEGER MDL. HP-6B, 6 T. cap., 18" throat depth, electric foot switch con-trol, mounted to hyd. scissor lift tbl., S/N 1307 (with bowl feeder), S/N 575.

INSPECTION: Tues., March 26, 9:00 A.M. to 4:00 P.M. & Morning of Sale. Safety glasses will be required.

AMADA 88 T. CAP. MDL. RG-80 CNC PRESS BRAKE

CNC

(1 OF 2) AMADA 55 T. CAP. MDL. RG-50 CNC PRESS BRAKES

CNC

AMADA 138 T. CAP. MDL. HFB-125-40 CNC PRESS BRAKE

CNC

1999

1998

2000

1995

2AVAILABLE

1995

6 7

SOUTHWORTH 1,500 LB. HYD. LIFT WELDING TABLES

CNC VERTICAL MACHINING CENTERMORI SEIKI MDL. MV45/40, Fanuc 6M CNC, 18" x 43" tbl., 31.5"X, 17.7"Y, 19.7" Z-axis travels, CAT-40 spdl. taper, 60–6,000 RPM, 7.5 HP, 20 sta. ATC, S/N 385.

WELDING ACCESSORIES(7) SOUTHWORTH 1,500 LB. CAP. HYD. SCISSOR LIFT WELDING TABLES, hydraulic scissor lift tables with large steel welding table tops.

TORIT “TRUNKLINE 2000” WELD FUME COLLECTOR, dual collection arms, 890 CFM, S/N N/A.

LARGE QUANTITY OF PLASTIC WELDING CURTAINS, TRACKS, AND MOUNTING HARD-WARE.

TIG WELDING MACHINES(5) MILLER “SYNCROWAVE 350LX”, 350 amps @ 34V, 40% duty cycle, with cooler, foot pedal, Tig torch, S/N LK370214N (2009), S/N LJ050040L (2008), S/N KK196159 (1999), S/N KK990005(1999), S/N KK161096(1999).(3) MILLER “DYNASTY 300DX”, 300 amps @ 32V, 15% duty cycle, with cooler, foot pedal, Tig torch, S/N LB114339 (2001), S/N LB114338 (2001), S/N LA263555 (2000).(3) MILLER “SYNCROWAVE 250DX”, 250 amps @ 30V, 40% duty cycle, with cooler, foot pedal, Tig torch, S/N LJ100382L (2008), S/N KK263723 (1999), S/N KC235547.

MIG WELDING MACHINESMILLER “DELTAWELD 452”, 450 amps @ 38V, 100% duty cycle, with wire feeder, Mig gun, and running gear, S/N KG174394.(5) MILLER “INVISION 354MP”, 350 amps @ 32V, 60% duty cycle, with wire feeder, cart and Mig gun, S/N LK380278N (2007), S/N LC719632 (2003), S/N KK204154 (1999), S/N KK204148 (1999), S/N KK160490 (1999),.MILLER “XMT-304”, 300 amps @ 32V, 60% duty cycle, with wire feeder, cart and Mig gun, S/N KH536784.(3) MILLER “MILLERMATIC 252”, 250 amps @ 28V, 60% duty cycle, with wire feeder, cart and Mig gun, S/N LJ240379B (2006), S/N LK360003N (2007), S/N LK360004N (2007).

CNC

PC BOARD REFLOW OVENHELLER MDL. 1809 MK-III SERIES, new 2000, Windows XP CNC, (9) forced convection zones top and bottom, heater wattage per zone 6,000 W, standard temperature range 25–350 deg. C, temp control accuracy ± 1 deg. C, cooling zones 2 (3 optional), conveyor length 18", 74 IPM max. conveyor spd., dimen-sions 183" x 54" x 63" high, S/N 0806H37NB.

CNC

2000

MILLER SYNCROWAVE 350 TIG WELDING MACHINE

MILLER DELTAWELD 452 MIG WELDER WITH WIRE FEEDER

TORIT TRUNKLINE-2000 FUME COLLECTOR

MILLER INVISION 354MP MIG WELDER WITH WIRE FEEDER

5AVAILABLE

5AVAILABLE

7AVAILABLE

On-Site Bidding in Plano, Texas or Bid Via Webcast at

6 7

GRIZZLEY 14" X 40" ENGINE LATHE

TORIT DOWN-FLOW DUST COLLECTOR MODULES

TORIT ENVIRONMENTAL CONTROL GRINDING BOOTH INTERIOR VIEW OF TORIT BOOTH

CANTILEVER MATERIAL RACKS

DUST COLLECTION EQUIPMENT

TORIT DOWN-FLO ENVIRONMENTAL CON-TROL BOOTH, 12'L x 12'W x 8'H interior dimensions, fluorescent lighting, sound-proof panels, (2) cartridge style power modules, 9,000 CFM, S/N N/A.(3) TORIT DOWN-FLO POWER MODULES, cartridge style dust collectors, 4,500 CFM ea., S/N N/A.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENT

SEVERAL SINGLE SIDED CANTILEVER SHEET STORAGE RACKS, 60" arms, PALLET JACKS, HAND TOOLS, HYDRAULIC LIFT CARTS, ROLLING LAD-DERS, SLUG HOPPERS, METAL SHOP FURNISHINGS, DUST COLLECTOR FILTERS, ELECTRONICS ASSEMBLY WORKBENCHES, PLASTIC STORAGE BINS.

3AVAILABLE

On-Site Bidding in Plano, Texas or Bid Via Webcast at

At the Premises of

FLEXTRONICS INTERNATIONAL640 Shiloh Rd., Bldg. 2

PLANO, TEXAS 75074(See Directions on Back Page)

AUCTION: WEDNESDAY, MARCH 27 • 10:00 A.M.INSPECTION: Tuesday, March 26, 9:00 A.M.

to 4:00 P.M. & Morning of Sale Safety glasses will be required

AUCTION

CNC MECHANICAL SHEAR10' X 1/4" CINCINNATI MDL. 2CC-10 CNC BACKGAUGE, 8' LH squaring arm, front sup-port arms, S/N 42823.

ENGINE LATHEGRIZZLEY MDL. G9732 HIGH PRECISION GAPBED TOOLROOM LATHE, 14" x 40", 19" swing over gap, 8" 3-jaw chuck, inch metric threading, spindle spds.: 35–2,000 RPM, S/N 8039.

OFFICE FURNITUREMISC. OFFICE FURNITURE TO INCLUDE Large quantity of office partitions and associ-ated attachments, chairs and misc. Please see sale catalog for details!

CINCINNATI 10' X 1/4" MECHANICAL SHEAR

CNC

QS-0016326

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

ULTRA CLEAN HIGH TECH

FABRICATING FACILITYFeaturing: Trumpf & Amada Machines including CNC FMF Punch Cell & CNC Punches as new as 2004, Laser and (9) Press Brakes; Mori Seiki

CNC Vertical Machining Center; Haeger Hardware Insertion Presses; Notcher;

Bandsaw; Lathe; Tool Grinder; (21) Miller Tig & Mig Welding Machines as new as 2007; Heller PC Board Reflow Oven; Torit Dust Collection Systems; Cantilever Storage Racks; Shop Support Equip.; Office Furniture; More!

PLANO, TEXAS

AUCTION

DIRECTIONSFROM DALLAS/FT. WORTH AIRPORT: Exit airport by driv-ing east on South Rental Car Drive to TX Hwy. 161. Turn left (north) onto TX Hwy. 161. Proceed approx. 25 miles to the exit for E. Renner Road. (As you travel northward Hwy. 161 becomes the President George Bush Turnpike and eventu-ally it turns eastward.) Turn left (east) onto E. Renner Road. Drive a short distance to the intersection at Shiloh Road. Turn left (north) onto Shiloh Road. Proceed about one mile to Global Lane and turn right. Proceed to auction the site at 640 Shiloh Road, Building 2 which is approx. two blocks down on the right side. Watch for auction signs.

FROM LOVE FIELD AIRPORT: Exit airport to Mockingbird Lane. Turn left (east) on Mockingbird and proceed to the Dallas North Tollway. Turn left (north) onto the Dallas North Tollway and proceed north of Dallas to the exit for the

President George Bush Turnpike. Turn right (east) onto the President George Bush Turnpike. Proceed to the exit for E. Renner Road. Turn left (east) onto E. Renner Road. Drive a short distance to the intersection at Shiloh Road. Turn left (north) onto Shiloh Road. Proceed about one– mile to Global Lane and turn right. Proceed to auction the site at 640 Shiloh Road, Building 2 which is approx. two blocks down on the right side. Watch for auction signs.

LODGINGLa Quinta ...................................................... (972) 423-1300 1820 North Central Expy., Plano, TX

Holiday Inn Express ..................................... (972) 881-1881 700 East Central Pkwy., Plano, TX

Ramada Limited .......................................... (972) 424-5568 621 Central Pkwy. East, Plano, TX

UNABLE TO ATTEND?Bid on-line in real time at TO PARTICIPATE YOU MUST:

1. Register at www.BidSpotter.com. DO IT NOW. 2. Either wire transfer, or mail a cashier’s check deposit in the

amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery, Inc. P.O. Box 19100, Houston, TX 77224-9100 If you are using FedEx or another delivery service: 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043, (713) 691-4401

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.

If you need assistance, don’t hesitate to call (713) 691-4401. ALL WEBCAST BIDS ARE SUBJECT TO A 16% BUYER’S PREMIUM.

PUBLIC INVITEDAUCTION: WED., MARCH 27 • 10:00 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

REMOVAL OF AUCTION PURCHASES WILL BEGIN ON MONDAY, APRIL 1, 2013. NO EXCEPTIONS. Safety glasses will be required.A 13% Buyer’s Premium Will Apply On-site.A 16% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until April 26, 2013.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies

allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.

Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further no-tice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.

The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does pur-chase.

Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.

The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim

which shall pertain to the fitness or use of that asset as be-ing purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropri-ate. This auction may include consignment items.

Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or post-ponement. Kindly contact auctioneer prior to attendance.

These terms and conditions may be modified or supplement-ed by language in the catalog available at the sale site or by announcement at the start of the sale. Bidders should be at-tentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS