View
220
Download
0
Tags:
Embed Size (px)
Citation preview
Attention Model Based SIFT Keypoints Filtration for Image Retrieval
Ke Gao1,2, Shouxun Lin1, Yongdong Zhang1,Sheng Tang1, Huamin Ren1,3
1Key Laboratory of Intelligent Information Processing, Institute of Computing Technology, Chinese Academy of Sciences, Beijing, China, 100080
2Graduate University of the Chinese Academy of Sciences, Beijing, China, 1000803Beijing University of Chinese Medicine
Seventh IEEE/ACIS International Conference on Computer and Information Science 2008
Outline
• Introduction• Review of Attention Model• SIFT Keypoints Filtration using Attention
Model– SIFT Keypoints Extraction– Attention Model based Keypoints Filtration
• Experiment Evaluation• Conclusion
Introduction
• Local Image Descriptors is applied in object recognition and image retrieval [1], [2] – distinctive, robust, and do not require
segmentation
[1] Mikolajczyk K, Schmid, C, “A Performance Evaluation of Local Descriptors”. IEEE Trans.Pattern Analysis and Machine Intelligence, 2005, 27(10), p1615-1630[2] V. Ferrari, T. Tuytelaars, and L. Van Gool. “Simultaneous Object Recognition and Segmentation by Image Exploration”, Proc. Eighth European Conf. Computer Vision, 2004, p40-54
Introduction
• Two considerations to using local image descriptors– keypoints should be placed at local peaks in a
scale-space search (remain stable over transformations)
– a description of each keypoint must be distinctive, concise, and invariant over transformations caused by changes in camera pose and lighting
Introduction
[3] D. Lowe, “Distinctive Image Features from Scale-Invariant Keypoints”, Int’l J. Computer Vision, vol. 2, no. 60, 2004, p91-110[4] Abdel-Hakim AE, Farag AA, “CSIFT: A SIFT Descriptor with Color Invariant Characteristics”. Computer Vision and Pattern Recognition, 2006,Vol. 2, p1978-1983[5] T. Tuytelaars and L. Van Gool, “Matching Widely Separated Views Based on Affine Invariant Regions”, Int’l J. Computer Vision, 2004,Vol. 1, no. 59, p61-85
Introduction
• Scale Invariant Feature Transform (SIFT)– most robust among the other local invariant
feature descriptors– It combines a scale invariant region detector and a
descriptor based on the gradient distribution in the detected regions
– The descriptor is represented by a 3D histogram of gradient locations and orientations
Introduction
Introduction
• PCA-SIFT has been developed based on SIFT algorithm [6]– It applies Principal Components Analysis (PCA) to
the normalized image gradient patch– accelerates matching speed by reducing feature
dimensions from 128 to 36 for each patch
[6] Yan Ke, Rahul Sukthankar, “PCA-SIFT: A More Distinctive Representation for Local Image Descriptors”. In Proc. of the IEEE Conf. on Computer Vision and Pattern Recognition, 2004,Vol.2, p506-513
Introduction
• Shortage– On a typical image, it returns a large number of
features– Especially when the object appears small in the
image• This paper proposes a novel method to filter
the SIFT keypoints based on attention model
Review of Attention Model
• Attention is at the nexus between cognition and perception
• Select a subset of the available sensory information before further processing
• A number of computational attention models were developed, such as the models proposed in [7], [8][7] J. K. Tsotsos, S. M. Culhane, W.Y.K. Wai, et al, “Modeling visual attention via selective tuning”, Artificial Intelligence, 1995,78: p507-545[8] Itti L, Gold C, Koch C, “Visual attention and target detection in cluttered natural scenes”. Optical Engineering, 2001,40(9), p1784-1 793
Review of Attention Model
• saliency-based attention model for scene analysis [8]
• “saliency region” means the region which has evident contrast with its surrounding
Review of Attention Model
SIFT Keypoints Filtration using Attention Model
• Content-based image retrieval can be looked as the problem of transforming the image into a set of feature vectors
• For good retrieval performance, the extracted features should satisfy two criteria– Distinctiveness– Matching speed
SIFT Keypoints Filtration using Attention Model
• SIFT descriptors are accurate enough• Too many keypoints from each image– most of them are “noise points” come from
background• This paper uses attention model to filter SIFT
keypoints
SIFT Keypoints Filtration using Attention Model
• SIFT Keypoints Extraction• Attention Model based Keypoints Filtration
SIFT Keypoints Extraction
• Four major stages of SIFT:1. scale-space peak selection2. keypoints localization3. orientation assignment4. keypoint descriptor
SIFT Keypoints Extraction
• In 1st stage– potential interest points are identified by scanning
over all possible scales and image locations– the only possible scale-space kernel is the
Gaussian function– the scale space of an image is defined as a
function 2 2 2( ) / 2
2
( , , ) ( , , ) ( , )
1( , , )
2x y
L x y G x y I x y
G x y e
SIFT Keypoints Extraction
– To efficiently detect stable keypoint locations in scale space, a series of difference-of-Gaussian (DoG) images are established
– DoG function provides a close approximation to the scale-normalized Laplacian of Gaussia,
– the maxima and minima of produce the most stable image featuresex. gradient, Hessian, or Harris corner function
2 2G 2 2G
2 2 ( , , ) ( , , )G G x y k G x yG
k
SIFT Keypoints Extraction
• In 2nd stage, candidate keypoints are localized to sub-pixel accuracy and eliminated if found to be unstable
• The third identifies the dominant orientations for each keypoint based on its local image patch
• The final stage builds a local image descriptor for each keypoint, based upon the image gradients in its local neighborhood
SIFT Keypoints Extraction
• The dimension of standard SIFT descriptor for each keypoint is 128
• PCA-SIFT reduces the dimension to 36• This work is based on the first three stages,
and further uses attention model to filter these keypoints– Provides benefits both in retrieval accuracy and
matching speed
Attention Model based Keypoints Filtration
• After the SIFT keypoints extraction, attention model is used to generate saliency map
• Fuzzy growing [9] is performed to find all of the saliency regions for original image
• Considering the calculation complexity, the number of saliency regions per image is limited to 3
[9] Ma Y F, Zhang H J, “Contrast-based image attention analysis by using fuzzy growing”. Proceedings of the 11th ACM International Conference on Multimedia. Berkeley, CA, USA: ACM, 2003, p374 – 381
Attention Model based Keypoints Filtration
Attention Model based Keypoints Filtration
• saliency regions (SR) in saliency map can be in arbitrary shapes
• use rectangle for simplicity• assume that no rectangle will overlap with
each other• SR is defined as
represents center denotes the size of SR
{ _ , _ , , }Center x Center y Width Height
( _ , _ )Center x Center y
( , )Width Height
Attention Model based Keypoints Filtration
• Based on the definition of SR, each SIFT keypoint is attached with a saliency weight
is 1 if (x,y) is in the center 0 if (x,y) is NOT subject to any SR
weightKP
2 2
2 2
2 ( _ ) ( _ )1
weight dis weight
dis
weight area pos
KP KPR SR
x Center x y Center yKPR
Width Height
SR R R
disKPR
Attention Model based Keypoints Filtration
• denotes the saliency weight of this saliency region
• Observe that the importance of a detected region is usually reflected by its region area weight and position weight
• If a region is too small to provide any useful information, it would not be considered– ranked the regions bigger than 5% of image– only the top 3 regions will be reserved as SRs
weightSR
areaR posR
Attention Model based Keypoints Filtration
• Area weight of the current SR is calculated as the following function:
• Since people often pay more attention to the region near the image center– use normalized Gaussian template to assign the
position weight
areaR
1
currentarea n
ii
areaR
area
posR
Attention Model based Keypoints Filtration
Attention Model based Keypoints Filtration
• The saliency weight of each SIFT keypoint is generated
• Rank all keypoints in an image with their• Only the top N keypoints will be reserved to
extract SIFT descriptors• N is determined– between retrieval accuracy and speed
weightKP
weightKP
Experiment Evaluation
Data sets• consists of three categories
1. The same object with different background or under different viewpoints
2. Video frames extracted from some movies3. Usual images with different size and content
• Most of the original photos are downloaded fromALOI (http://staff.science.uva.nl/~aloi/)
Caltech (http://vision.caltech.edu/Image_Datasets/Caltech256/)
Experiment Evaluation
Experiment Evaluation
• Some geometric and photometric transformations have been made to evaluate the algorithm under different conditions
• According to different objects, the data set is divided into about 50 classes, and each class has more than 20 relevant images
• 6,000 images and 7,240,000 standard SIFT keypoints
Experiment Evaluation
• Evaluation Metrics– use the method Bag of Words proposed in [10]– which vector quantizes the SIFT descriptors into
clusters uses k-means– represents an image as a bag of “words”– Using ‘term frequency’ as standard weighting– all of the images are organized as an inverted file
[10] J.Sivic, A.Zisserman, “Video Google: A Text Retrieval Approach to Object Matching in Videos”. Proceedings of the International Conference on Computer Vision, 2003, p1470-1477
Experiment Evaluation
• Evaluation Metrics– Image matching is based on cosine between these
quantized vectors– This method can ensure in-time retrieval, and
proven to be very useful– If the cosines distance between image vectors
larger than the chosen threshold, this pair of images is called a match
– all of the images will be ranked with the matching degree
Experiment Evaluation
• Evaluation Metrics– To describe the image ranking sequence of image
retrieval in this data set– adopt average retrieval precision
is the query image, denotes each image of ranking result, and n is 20q ip
Experiment Evaluation
• Evaluation Metrics
Experiment Evaluation
• Experimental Results and Discussion– Comparing attention model based SIFT keypoints
filtration algorithm (AF-SIFT) to the standard SIFT and PCA-SIFT
– The dimension of standard SIFT is 128• A 4*4 array of histograms, each with 8 orientation bins
– PCA-SIFT descriptor dimension for each keypoint is 36
Experiment Evaluation
• Experimental Results and Discussion– Using two methods to compare its performance1. AF-SIFT1 uses 128-dimension descriptors in the
standard way2. AF-SIFT2 uses a 2*2 array with 8 orientation
bins, and its dimension is 32
Experiment Evaluation
• Experimental Results and Discussion
– It’s a bit time-consuming for filtering algorithms, but the processing is completed off-line
– effectively reduce the background features, so it in fact decreases the whole calculation time
Experiment Evaluation
• Experimental Results and Discussion– ALOI has few background confusion• varying illumination or view point
– Movie frames have little obvious difference between foreground and background
– Coral Gallery are nature photos with confusion background
Experiment Evaluation
• Experimental Results and Discussion
Experiment Evaluation
• Experimental Results and Discussion– filtrated SIFT keypoints provides information of
saliency regions– the ranking of keypionts is based on the global
distribution, not only relies on local patches– the most distinctive keypoints are reserved– avoid the infection of background features– made the cluster result become more exact
Experiment Evaluation
• Experimental Results and Discussion– Fig. 9 shows how the matching reliability varies
as a function of N– N denotes the number
of SIFT keypoints left behind the filtration
– A good tradeoffbetween accuracyand speed should beachieved
Conclusion
• AF-SIFT provides an effective alternative of standard SIFT
• Region-based image retrieval• Seeking for ways to apply this idea to large
image database retrieval