astm12_0408

7/30/2019 astm12_0408

http://slidepdf.com/reader/full/astm120408 1/6

ASTM Volume 04.08, March 2012Soil and Rock (I): D420 - D5876

Table of Contents

Standard Number Title

1 D421-85(2007)Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and

Determination of Soil Constants

2 D422-63(2007) Standard Test Method for Particle-Size Analysis of Soils

3 D425-88(2008) Standard Test Method for Centrifuge Moisture Equivalent of Soils

4 D558-11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

5 D559-03 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures

6 D560-03 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures

7 D653-11 Standard Terminology Relating to Soil, Rock, and Contained Fluids

8 D698-07e1Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort

(12 400 ft-lbf/ft3(600kN m/m

3))

9 D806-11 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures

10 D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

11 D1140-00(2006) Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve

12 D1143/D1143M-07e1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

13 D1241-07 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

14 D1411-09Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate

Road Mixes

15 D1452-09 Standard Practice for Soil Exploration and Sampling by Auger Borings

16 D1556-07 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method

17 D1557-09Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort

(56,000 ft-lbf/ft3(2,700kN-m/m

3))

18 D1558-10Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-

Grained Soils

19 D1586-11 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

20 D1587-08 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes

21 D1632-07Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens

in the Laboratory

22 D1633-00(2007) Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

23 D1634-00(2006)Standard Test Method for Compressive Strength of Soil-Cement Using Portions of BeamsBroken in Flexure (Modified Cube Method)

24 D1635-00(2006)Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point

Loading

25 D1883-07e2 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils

26 D1997-91(2008)e1Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry

Mass

27 D2113-08 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation

28 D2166-06 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

29 D2167-08 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

30 D2168-10 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors

31 D2216-10Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and

Rock by Mass

32 D2434-68(2006) Standard Test Method for Permeability of Granular Soils (Constant Head)

33 D2435/D2435M-11Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental

Loading

34 D2487-11Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification

System)

35 D2488-09a Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)

36 D2573-08 Standard Test Method for Field Vane Shear Test in Cohesive Soil

37 D2844-07e1 Standard Test Method for Resistance

38 D2845-08Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic

Constants of Rock

39 D2850-03a(2007)Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive

Soils

40 D2936-08 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens

41 D2937-10 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

42 D2944-71(2008) Standard Test Method of Sampling Processed Peat Materials

43 D2973-10e1 Standard Test Method for Total Nitrogen in Peat Materials

1/6

7/30/2019 astm12_0408



Table of Contents


44 D2974-07a Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils

45 D2976-71(2004) Standard Test Method for pH of Peat Materials

46 D2977-03 Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes

47 D2978-03(2010) Standard Test Method for Volume of Processed Peat Materials

48 D2980-04(2010)Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-

Saturated Peat Materials

49 D3080/D3080M-11 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions

50 D3155-11 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures

51 D3213-08 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil

52 D3282-09Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway

Construction Purposes

53 D3385-09 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

54 D3404-91(2004) Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers

55 D3441-05 Standard Test Method for Mechanical Cone Penetration Tests of Soil

56 D3550-01(2007) Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

57 D3551-08 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer 58 D3689-07 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load

59 D3740-11Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection

of Soil and Rock as Used in Engineering Design and Construction

60 D3877-08Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-

Lime Mixtures

61 D3966-07 Standard Test Methods for Deep Foundations Under Lateral Load

62 D3967-08 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

63 D3999-11Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils

Using the Cyclic Triaxial Apparatus

64 D4015-07 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method

65 D4016-08Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory

Method)

66 D4043-96(2010)e1Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well

Techniques

67 D4044-96(2008)Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for

Determining Hydraulic Properties of Aquifers

68 D4050-96(2008)Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Tests for

Determining Hydraulic Properties of Aquifer Systems

69 D4083-89(2007) Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)

70 D4104-96(2010)e1

Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky

Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug

Tests)

71 D4105-96(2008)Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage

Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method

72 D4106-96(2008)Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage

Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method

73 D4186-06Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils

Using Controlled-Strain Loading74 D4219-08 Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils

75 D4220-95(2007) Standard Practices for Preserving and Transporting Soil Samples

76 D4221-11 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

77 D4223/D4223M-12 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils

78 D4253-00(2006)Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory

Table

79 D4254-00(2006)e1Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of

Relative Density

80 D4318-10 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

81 D4320/D4320M-09Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for

Obtaining Engineering Parameters

82 D4373-02(2007) Standard Test Method for Rapid Determination of Carbonate Content of Soils

83 D4380-84(2006) Standard Test Method for Density of Bentonitic Slurries

84 D4381-06 Standard Test Method for Sand Content by Volume of Bentonitic Slurries

2/6

7/30/2019 astm12_0408



Table of Contents


85 D4394-08Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid

Plate Loading Method

86 D4395-08Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using

Flexible Plate Loading Method87 D4403-84(2005) Standard Practice for Extensometers Used in Rock

88 D4404-10Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil

and Rock by Mercury Intrusion Porosimetry

89 D4427-07 Standard Classification of Peat Samples by Laboratory Testing

90 D4428/D4428M-07 Standard Test Methods for Crosshole Seismic Testing

91 D4429-09a Standard Test Method for CBR (California Bearing Ratio) of Soils in Place

92 D4435-08 Standard Test Method for Rock Bolt Anchor Pull Test

93 D4436-08 Standard Test Method for Rock Bolt Long-Term Load Retention Test

94 D4452-06 Standard Practice for X-Ray Radiography of Soil Samples

95 D4506-08Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using

Radial Jacking Test

96 D4511-11 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat

97 D4525-08 Standard Test Method for Permeability of Rocks by Flowing Air

98 D4531-86(2008) Standard Test Methods for Bulk Density of Peat and Peat Products

99 D4535-08 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer

100 D4542-07Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content

of Soils by Refractometer

101 D4543-08Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying

Conformance to Dimensional and Shape Tolerances

102 D4544-86(2008) Standard Practice for Estimating Peat Deposit Thickness

103 D4546-08 Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils

104 D4553-08 Standard Test Method for Determining In Situ Creep Characteristics of Rock

105 D4554-02(2006) Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities

106 D4555-10Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ

Uniaxial Compressive Test

107 D4564-08e1 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method108 D4609-08 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization

109 D4611-08 Standard Test Method for Specific Heat of Rock and Soil

110 D4612-08 Standard Practice for Calculating Thermal Diffusivity of Rocks

111 D4623-08Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—

USBM Borehole Deformation Gauge

112 D4630-96(2008)Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-

Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test

113 D4631-95(2008)Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks

by In Situ Measurements Using Pressure Pulse Technique

114 D4633-10 Standard Test Method for Energy Measurement for Dynamic Penetrometers

115 D4643-08Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven

Heating

116 D4644-08 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks

117 D4645-08Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing

Method

118 D4647-06e1Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole

Test

119 D4648/D4648M-10Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained

Clayey Soil

120 D4696-92(2008) Standard Guide for Pore-Liquid Sampling from the Vadose Zone

121 D4700-91(2006) Standard Guide for Soil Sampling from the Vadose Zone

122 D4718-87(2007)Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize

Particles

123 D4719-07 Standard Test Methods for Prebored Pressuremeter Testing in Soils

124 D4729-08 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method

125 D4753-07Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use

in Soil, Rock, and Construction Materials Testing126 D4767-11 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

127 D4829-11 Standard Test Method for Expansion Index of Soils

3/6

7/30/2019 astm12_0408



Table of Contents


128 D4832-10Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM)

Test Cylinders

129 D4879-08 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock

130 D4914-08 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the SandReplacement Method in a Test Pit

131 D4943-08 Standard Test Method for Shrinkage Factors of Soils by the Wax Method

132 D4944-11Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium

Carbide Gas Pressure Tester

133 D4945-08 Standard Test Method for High-Strain Dynamic Testing of Piles

134 D4959-07 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating

135 D4971-08Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using

Diametrically Loaded 76-mm (3-in.) Borehole Jack

136 D4972-01(2007) Standard Test Method for pH of Soils

137 D4992-07 Standard Practice for Evaluation of Rock to be Used for Erosion Control

138 D5030-04Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method

in a Test Pit

139 D5079-08 Standard Practices for Preserving and Transporting Rock Core Samples140 D5080-08 Standard Test Method for Rapid Determination of Percent Compaction

141 D5084-10Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials

Using a Flexible Wall Permeameter

142 D5088-02(2008) Standard Practice for Decontamination of Field Equipment Used at Waste Sites

143 D5092-04(2010)e1 Standard Practice for Design and Installation of Groundwater Monitoring Wells

144 D5093-02(2008)Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer

with Sealed-Inner Ring

145 D5102-09 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

146 D5121-10 Standard Practice for Preparation of Rock Slabs for Durability Testing

147 D5126/D5126M-90(2010)e1Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in

Vadose Zone

148 D5143-06(2010)e1Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High

Performance Liquid Chromatography

149 D5195-08Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

150 D5202-08Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical

Grouted Soils

151 D5220-08Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron

Depth Probe Method

152 D5239-04 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

153 D5240-04Standard Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of

Sodium Sulfate or Magnesium Sulfate

154 D5254/D5254M-92(2010)e1 Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site

155 D5255-01(2008) Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock

156 D5268-07 Standard Specification for Topsoil Used for Landscaping Purposes

157 D5269-96(2008)Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the

Theis Recovery Method

158 D5270-96(2008)Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded,

Nonleaky, Confined Aquifers

159 D5298-10 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

160 D5299-99(2005)Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices,

Boreholes, and Other Devices for Environmental Activities

161 D5311-11 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil

162 D5312-04Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing

and Thawing Conditions

163 D5313-04Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and

Drying Conditions

164 D5314-92(2006) Standard Guide for Soil Gas Monitoring in the Vadose Zone

165 D5333-03 Standard Test Method for Measurement of Collapse Potential of Soils

166 D5334-08Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by

Thermal Needle Probe Procedure167 D5335-08

Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded

Electric Resistance Strain Gauges

4/6

7/30/2019 astm12_0408



Table of Contents


168 D5408-93(2010)e1Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One - Additional

Identification Descriptors

169 D5409/D5409M-93(2010)e1Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two - Physical

Descriptors

170 D5410-93(2007)Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Three - Usage

Descriptors

171 D5434-09 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

172 D5435-03(2008) Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection

173 D5447-04(2010) Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem

174 D5472-93(2005)Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the

Control Well

175 D5473-93(2006)

Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration

of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky

Confined Aquifer

176 D5474-93(2006) Standard Guide for Selection of Data Elements for Groundwater Investigations

177 D5490-93(2008) Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information

178 D5519-07 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials

179 D5520-11Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples

by Uniaxial Compression

180 D5521-05 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers

181 D5539-94(2008) Standard Specification for Seed Starter Mix

182 D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer

183 D5607-08Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens

Under Constant Normal Force

184 D5608-10Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive

Waste Sites

185 D5609-94(2008) Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling

186 D5610-94(2008) Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling

187 D5611-94(2008) Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application

188 D5715-00(2006)

Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils

(Visual/Manual Method)

189 D5716-95(2006) Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir

190 D5718-95(2006) Standard Guide for Documenting a Groundwater Flow Model Application

191 D5719-95(2006) Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes

192 D5720-95(2009)Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement

Systems for Geotechnical Purposes

193 D5730-04Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil,

Rock, the Vadose Zone and Groundwater

194 D5731-08Standard Test Method for Determination of the Point Load Strength Index of Rock and

Application to Rock Strength Classifications

195 D5737-95(2006) Standard Guide for Methods for Measuring Well Discharge

196 D5738-95(2006)Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions

and Trace Elements - Diagrams for Single Analyses

197 D5753-05(2010) Standard Guide for Planning and Conducting Borehole Geophysical Logging

198 D5754-95(2006)Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions

and Trace Elements - Trilinear Diagrams for Two or More Analyses

199 D5777-00(2011)e1 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation

200 D5778-07 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils

201 D5779-08e1Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and

Manmade Materials for Erosion Control

202 D5780-10 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load

203 D5781-95(2006)Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental

Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

204 D5782-95(2006)Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the

Installation of Subsurface Water-Quality Monitoring Devices

205 D5783-95(2006)

Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for

Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring

Devices206 D5784-95(2006)

Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the

Installation of Subsurface Water-Quality Monitoring Devices

5/6

7/30/2019 astm12_0408



Table of Contents


207 D5785-95(2006)

Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined

Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug

Test)

208 D5786-95(2006) Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

209 D5787-95(2009) Standard Practice for Monitoring Well Protection

210 D5850-95(2006)Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient,

and Anisotropy Ratio from a Network of Partially Penetrating Wells

211 D5852-00(2007)Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the

Jet Index Method

212 D5855-95(2006)

Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage

Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing

Well

213 D5856-95(2007)Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a

Rigid-Wall, Compaction-Mold Permeameter

214 D5872-95(2006)Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental

Exploration and Installation of Subsurface Water-Quality Monitoring Devices

215 D5873-05 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method216 D5874-02(2007) Standard Test Method for Determination of the Impact Value (IV) of a Soil

217 D5875-95(2006)Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental

Exploration and Installation of Subsurface Water-Quality Monitoring Devices

218 D5876-95(2005)Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for

Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

6/6

Documents

astm12_0408