ASSEMBLY INSTRUCTIONS

One Touch Umbrella

ASSEMBLY INSTRUCTIONS

One Touch Umbrella

ACCESSORIESScrew 1 B D E 1 Set

Screw 2 A C E 1 Set

Screw 3 G H J 4 Sets

Screw 5 F E 1 Set

Screw 6 K E 1 Set

Screw 7 K E 1 Set

Screw cap L 4 Pc Stopper cap M 1 Pc

TOOLSAdjustable spanner / wrench

(not supplied)

Allen Key(1 pc)

10mm10mm wrench(not supplied)

Handlebar (1 Set)

Umberlla Top

Sidearm

Screw 1

Screw 2

Screw 3 x 4

Screw 5Screw 6

Screw 7

Stopper cap

Plastic base

Prepare at least 100kg of sand to fill umbrella base.

• Assemble plastic base. See page 2.

• Screw all parts. See page 3-4.

• Connect the umbrella to the base.

• Open umbrella slowly.

PROTECTION COVER

(Optional) Remove the protective cover before assembly.

BASE PREPARATION

Sand

Sand

Fill up the plastic base with at least 100kg of sand.

Add water and small stones for further stability.

Stopper cap M

WARNING:

Do not pour sand into the 4 screw wells.

ARM ASSEMBLY

A x 1 C x 2 E x 3

B x 1 D x 2 F x 1

Base plate connection

E

E

D

DC

C

A

B

Arm connection detail

E

F

G x 4 H x 4 J x 4

Connecting the arm to the plastic base

Tilt the arms of the umbrella forward and connect the remaining bolts to the base plate.

K x 2 E x 2

K

K

E

E

SMALL BASE COVER Place the screw caps on exposed

screw head

L x 4

OPENING

Open the umbrella top.

Push the umbrella slowly to open.

ROTATING

TILTING

LOOSE

Push the lever in the centre of the umbrella to the horizontal position. Take the end of a rib and push or pull the cover to

desired tilt position.

FIXED

Always pull the lever to the fixed position when the

umbrella is in use.

Redef ining the value of style

mobelli.co.za | 0861 66 23 55Paarden Eiland | Sea Point | Illovo | Fourways | Umhlanga Ridge

CLOSING

MOVING

Release the lever to the loose position.

Press the plastic bar and push the umbrella to close. Place protective cover when not in use.

Rotate the handle bar to lift and lower wheels.