TAIWAN AMAC CLAMP INDUSTRIAL CO., LTD. TEL:886-4-25150011 FAX:884-4-25150022

ASC Air Swing Clamp Cylinder • Bore:ø25-ø63mm • Pmax:10kg/cm2

• MC

•

• A.B

• 1.5

•

Product Introduction • The product is ideal for mass production on a special purpose machine and jig on machining

center. It will greatly upgrade production efficiency.

• When the air cylinder actuate, and the piston moves downward, the clamping arm will swing toa rated angle! Then it lowers until the workpiece is clamped securely.

• To avoid too fast motion a flow control valve is suggested to connect to the air inlet ports (A, B)on the swing clamp cylinder. Do not clamp workpiece while the clamp is swinging to avoiddamaging on the cylinder barrel and internal parts.

• When increasing length of clamping arm is required, be sure do not exceed 1.5 times of theariginal length.

• The cylinder body is manufactured from aluminum allog. Surface is hard membrane treated formaximum smoothness on inside surface and long service life.

Specifications

Ordering Code

Bore of cylinder mm ø25 ø32 ø40 ø50 ø63

Piston rod diameter mm ø14 ø16 ø16 ø20 ø20

Swing stroke mm 9 11 11 13 13

/ Clamping stroke std/extension mm 13 15 / 30 15 / 30 17 / 34 17 / 34

/ Pressure area pull/push cm2 3.37 / 4.91 6.03 / 8.04 10.56 / 12.57 16.49 / 19.63 28.03 / 31.17

Theoretical clamping force 6kg/cm2 20 36 63 99 168

Fluid Filtered air

Max operation pressure 10Kg/cm2

Operation pressure range 1-7Kg/cm2

Rotating direction R L Turn right R or turn left L

Rotating angle 90 0˚, 45˚, 60˚ Standard angle 90˚, Optional angle 0˚, 45˚, 60˚

Acting type Double acting

R

Series Bore of Cylinder Clamping arm type

25:ø25mm32:ø32mm40:ø40mm50:ø50mm63:ø63mm

Type Rotating Angle Stroke extensionLine type

Rotating Direction

S:S: Single side arm

D:D: Double side arm

:Blank: Line type

MF:MF:Manifold with flow control

MS:MS:With magnetic induction

TB:TB: Threaded body

FA:FA: Flange type

ASC MF 25 S 90 E

N:0˚N:0˚ No swing

LL: Turn left

RR: Turn right

Stroke extensionLine type

E

90:90˚ 45:45˚ 60:60˚

TAIWAN AMAC CLAMP INDUSTRIAL CO., LTD. TEL:886-4-25150011 FAX:884-4-25150022

Air Swing Clamp Cylinder

ASC

Double Side Swing Clamp Clamping Arm Mounting Methods

Clamping Arm Removing Methods

Single Side Swing Clamp

Sw

ing

Str

oke

Cla

mpi

ng s

trok

e

• Bore:ø25-ø63mm • Pmax:10kg/cm2

TAIWAN AMAC CLAMP INDUSTRIAL CO., LTD. TEL:886-4-25150011 FAX:884-4-25150022

Air Swing Clamp Cylinder • Bore:ø25-ø63mm • Pmax:10kg/cm2

Single side swing clamp Double side swing clamp

Dimensional table

Clamping Port

Unclamping Port

ASC Line type

A

B

TAIWAN AMAC CLAMP INDUSTRIAL CO., LTD. TEL:886-4-25150011 FAX:884-4-25150022

Air Swing Clamp Cylinder MF • Bore:ø32-ø63mm • Pmax:10kg/cm2

Single side swing clamp Double side swing clamp

Dimensional table

ASC MFManifold with flow control

Clamping Port

Unclamping Port

A

B

TAIWAN AMAC CLAMP INDUSTRIAL CO., LTD. TEL:886-4-25150011 FAX:884-4-25150022

Air Swing Clamp Cylinder MS • Bore:ø25-ø63mm • Pmax:10kg/cm2

MS25S MS32S-63S MS32D-63D

Dimensional table

ASC MSWith magnetic induction

Clamping Port Unclamping PortA B

TAIWAN AMAC CLAMP INDUSTRIAL CO., LTD. TEL:886-4-25150011 FAX:884-4-25150022

Air Swing Clamp Cylinder FA.TB • Bore:ø32-ø63mm • Pmax:10kg/cm2

FA-S FA-D TB-S TB-D

Dimensional table

ASC FA /TBFlange type / Threaded body

Clamping Port Unclamping PortA B