AS400 commands

SX41-3732-00Application System/400

System/36-AS/400Command Cross-Reference

Version 3

SX41-3732-00Application System/400

System/36-AS/400Command Cross-Reference

Version 3

IBM

| First Edition (September 1994)

| This edition applies to the licensed program IBM Operating| System/400, (Program 5763-SS1), Version 3 Release 1| Modification 0, and to all subsequent releases and modifi-| cations until otherwise indicated in new editions. Make| sure you are using the proper edition for the level of the| product. Changes or additions to the text are indicated by| a vertical line (|) to the left of the change or addition.

| The following terms, denoted by an asterisk (*) in this pub-| lication, are trademarks of the IBM Corporation in the| United States or other countries or both: Application| System/400, APPN, AS/400, C/400, DisplayWrite,| FORTRAN/400, IBM, OfficeVision, OfficeVision/400, Oper-| ating System/400, OS/400, PROFS, RPG/400, and 400.| The following terms, denoted by a double asterisk (**) in| this publication, are trademarks of other companies:| RM/COBOL-85 - Ryan McFarland Corporation.

| This publication could contain technical inaccuracies or| typographical errors. This publication may refer to pro-| ducts that are announced but not currently available in| your country. This publication may also refer to products| that have not been announced in your country. IBM| makes no commitment to make available any unan-| nounced products referred to herein. The final decision to| announce any product is based on IBM's business and| technical judgment. A form for reader comments is pro-| vided at the back of this publication. If the form has been| removed, you can mail your comments to: Attn Depart-| ment 245; IBM Corporation; 3605 Highway 52 N;| Rochester, MN 55901-9986 USA. Or you can fax your| comments to:

| United States and Canada: 800+937-3430| Other countries: (+1)+507+253-5192

| If you have access to Internet, you can send your com-| ments electronically to [email protected];| IBMMAIL, to ibmmail(usib56rz).

| Copyright International Business Machines Corpo-| ration 1994. All rights reserved.| Note to U.S. Government Users — Documentation related| to restricted rights — Use, duplication or disclosure is| subject to restrictions set forth in GSA ADP Schedule Con-| tract with IBM Corp.

Contents

Introduction . . . . . . . . . . . . . . . . . . 1Displaying AS/400 Commands Online . . . . . 1

System/36 Commands to AS/400 CommandsCross-Reference . . . . . . . . . . . . . . . 3

System/36 Procedures to AS/400 CommandsCross-Reference . . . . . . . . . . . . . . . 3

System/36 Control Commands to AS/400Commands Cross-Reference . . . . . . . . . 39

System/36 OCL Statements to AS/400Commands Cross-Reference . . . . . . . . . 47

Appendix. AS/400 Control LanguageCommands . . . . . . . . . . . . . . . . . . 53

Copyright IBM Corp. 1994 iii

iv AS/400 System/36-AS/400 Command Cross-Reference

Introduction

This book is designed as a cross-reference to helpusers who are familiar with System/36 system func-tion to determine which AS/400 control language(CL) command performs the same (or similar) func-tion.

Only those commands with equivalent System/36function appear in the cross-reference listing. SomeAS/400 commands provide new function not avail-able on the System/36. A complete list of AS/400commands is contained in Appendix, “AS/400Control Language Commands” on page 53.Detailed information about the function of AS/400commands is available in the CL Reference.

Displaying AS/400 Commands OnlineTo display a specific command, type the commandname on the command line and press F4 to see thecommand prompt for parameters.

There are several ways to display lists of com-mands:

� Press F4 on a blank command line to see theMajor Command Groups menu. The MajorCommand Groups menu lists commands ingeneral groups. For example, a group mayconsist of commands grouped by subjectmatter, by the action performed, or alphabet-ically by name.

� Type GO CMDxxx on the command line andpress Enter to display a menu of commandsrelating to xxx. There are many CMDxxx menuson the AS/400 system.

– xxx may be the verb part of the command.For example, type GO CMDCRT on the

Copyright IBM Corp. 1994 1

command line and press Enter to display amenu of all create (CRT) commands.

– xxx may also be the noun part of thecommand. For example, type GO CMDLIBon the command line and press Enter todisplay a menu showing all library com-mands.

� Select Command (SLTCMD) displays a menu ofrelated commands. For example, typeSLTCMD xxx\ on the command line and pressEnter to display a menu of commands relatingto xxx. In this example, xxx is the verb part ofthe command. For example, SLTCMD CRT\ dis-plays all Create (CRT) commands. SLTCMD DL\displays all commands beginning with DL.

To display online help for a CL command, press theHelp key. Online help for a command can also bedisplayed by pressing F11 in any help display.Type the command name on the Search Help Indexdisplay screen and press Enter. The help informa-tion can then be displayed or printed.

2 AS/400 System/36-AS/400 Command Cross-Reference

PROCEDURES

System/36 Commands to AS/400Commands Cross-Reference

System/36 procedures, control commands, and OCLstatements are listed alphabetically, with cross-references to AS/400* commands, beginning on thefollowing pages:

System/36 procedures Page 3System/36 control commands Page 39System/36 OCL statements Page 47

System/36 Procedures to AS/400Commands Cross-ReferenceThe first column lists the System/36 commands inalphabetic order. The second column lists theAS/400 commands with the same (or similar) func-tion followed by a brief description of the AS/400function.

System/36 AS/400 AS/400 Function#STRTUP1 ADDAJE Adds an autostart job entry to

an existing subsystemdescription

WRKSBSD Allows you to work with a listof subsystem descriptions

#STRTUP2 ADDAJE Adds an autostart job entry toan existing subsystemdescription

WRKSBSD Allows you to work with a listof subsystem descriptions

ALERT CHGMSGD Changes an existing messagedescription stored in a speci-fied message file

ALOCFLDR RGZDLO Allows a user to reorganizedocument library objects

ALOCLIBR None Function not supported or nolonger required on the AS/400system


PROCEDURES

System/36 AS/400 AS/400 FunctionALTERCOM GO

CFGCMNShows the Configure Commu-nications display (morecommand mapping information

| can be found in the System/36| Migration book)

APAR CRTAPAR Records data on tape,diskette, or a save file on diskto submit with an authorizedprogram analysis report(APAR)

APPNINFO DSPAPPNINF Displays or prints APPN*network information

ARCHIVE SAVDLO Saves the specified docu-ments or folders to tape,diskette, or a save file on disk

ASM None Function not supported or nolonger required on the AS/400system

AUTOC CRTRPTPGM Creates (compiles) RPG withautomatic report specifications

BALPRINT None Function not supported or nolonger required on the AS/400system

BASIC STRBAS Starts a BASIC session

BASICP STRBASPRC Starts running a BASIC proce-dure saved as a source filemember

BASICR CALL Calls a specified program andpasses control to it

BASICS CRTBASPGM Creates (compiles) a BASICprogram

BGUATTR STRBGU Starts the Business GraphicsUtility (BGU) licensed program

BGUCHART DSPCHT Displays an existing chartdefined by the BusinessGraphics Utility (BGU) licensedprogram

DSPGDF Displays, prints, or plots agraphics data file

STRBGU Starts the Business GraphicsUtility (BGU) licensed program


PROCEDURES

System/36 AS/400 AS/400 FunctionBGUDATA STRBGU Starts the Business Graphics

Utility (BGU) licensed program

BGUGRAPH DSPGDF Displays, prints, or plots agraphics data file

DSPCHT Displays an existing chartdefined by the BusinessGraphics Utility (BGU) licensedprogram


BLDFILE CRTPF Creates a physical file

BLDGRAPH CRTGDF Creates a graphics data filefrom a chart format and a datafile


BLDINDEX CRTLF Creates a logical file

BLDLIBR CRTLIB Creates a user library

CRTSRCPF Creates a database file tocontain source statements

BLDMENU CRTMNU Creates either a display file orprogram menu

CRTMSGFMNU Creates a menu from specifiedmessage files

CRTS36MNU Creates a menu (display fileand command message file)from the user's sourcemembers

BUILD None Function not supported or nolonger required on the AS/400system

CACHE None Function not supported or nolonger required on the AS/400system

CATALOG DSPDKT Displays the volume label andthe data file identifier on adiskette

DSPFD Displays the informationretrieved from a file descriptionof a database

AS/400 Command Cross-Reference 5

PROCEDURES

System/36 AS/400 AS/400 FunctionDSPFFD Displays or prints field-level

information for one or morefiles in one library or alllibraries that the user canaccess

DSPFLR Displays or prints a list offolders and documents, orcreates a database file con-taining the list

DSPLIB Displays the contents of oneor more libraries

DSPOBJD Displays the names and attri-butes of specified objects in aspecified library

DSPTAP Displays the volume label anddata file label information on atape

CGU STRCGU Starts the Character GeneratorUtility (CGU) function

CHGXLATE None Function not supported or nolonger required on the AS/400system

CHNGEMEM RNMOBJ Renames a specified objectname and object type

RNMM Renames a specified filemember

CNFIGICF GOCFGCMN

Shows the Configure Commu-nications display (morecommand mapping information


CNFIGSSP CRTDEVxxxx Creates a device descriptionwhere xxxx is the device classor type

CHGDEVxxxx Changes a device descriptionwhere xxxx is the device classor type

CFGRPDS Configures the RSCS/PROFS*bridge application

CHGCTLxxxx Changes a controllerdescription where xxxx is thecontroller class or type


PROCEDURES

System/36 AS/400 AS/400 FunctionCHGLINxxxx Changes a line description

where xxxx is the line class ortype

CHGPRTF Changes one or more of thecharacteristics of the specifiedprinter device files

CRTCTLxxxx Creates a controllerdescription where xxxx is thecontroller class or type

CRTLINxxxx Creates a line descriptionwhere xxxx is the line class ortype

CRTPRTF Creates a printer device file

DLTDEVD Deletes a device description

DLTLIND Deletes a line description

GOLICPGM

Shows the Work with LicensedProgram display

CNFIGX25 GOCFGCMN



COBOLC CRTCBLPGM Creates (compiles) a COBOLprogram

CRTRMCPGM Allows a user to compile anRM/COBOL-85** sourceprogram into an program thatcan be run in the AS/400 envi-ronment

COBOLONL STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options

COBOLP STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options

COBSDA STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options


PROCEDURES

System/36 AS/400 AS/400 FunctionSTRSDA Starts the screen design aid

main menu and allows usersto create or change a displayformat interactively

COBSEU STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options

STRSEU Calls the source entry utility(SEU) program and displaysthe main menu

COMPRESS None Function not supported or nolonger required on the AS/400system

CONDENSE None Function not supported or nolonger required on the AS/400system (use RGZDLO to con-dense a folder)

COPYDATA CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device

CRTDUPOBJ Copies one or a group ofobjects from one library toanother

RGZPFM Reorganizes a physical filemember

COPYDIAG DUPDKT Duplicates the contents fromone diskette onto one or moreother diskettes

COPYI1 DUPDKT Duplicates the contents fromone diskette onto one or moreother diskettes

COPYPRT CPYSPLF Copies data records in a spec-ified spooled output file to auser-defined physical databasefile

DSPSPLF Displays the contents of aspecified spooled file

CREATE ADDMSGD Describes a message andstores it in a specifiedmessage file


PROCEDURES

System/36 AS/400 AS/400 FunctionCRTMSGF Creates a user-defined

message file

CRTS36MSGF Creates a message file fromthe user's System/36 messagesource member

DATE CHGJOB Changes the attributes of a job

DEFINEID GOCFGCMN



DEFINEPN GOCFGCMN



DEFINLOC GOCFGCMN



DEFINX21 GOCFGCMN



DEFINX25 GOCFGCMN



DEFSUBD CRTFLR Creates a folder

DLTDLO Deletes one or all documentsor folders

DELETE DLTDKTLBL Deletes a data file identifierfrom a diskette

DLTDLO Deletes one or all documentsor folders

DLTDTADCT Deletes a data dictionary

DLTF Deletes a specified databaseor device files


PROCEDURES

System/36 AS/400 AS/400 FunctionDLTLIB Deletes a specified library after

all objects in the library aredeleted or moved

WRKOBJ Allows a user to work withobjects

DELNRD WRKDDMF Displays a list of DDM files,which allows you to change,delete, create, and do otherwork with DDM files

DFA DMPCLPGM Dumps all variables declaredin a CL program and all mes-sages in the program'smessage queue to a spooledprinter file

DMPDLO Dumps the contents and/orattributes, or both, of folders,documents, or internal docu-ment library system objects toa printer file

DMPJOB Dumps the basic data struc-tures or specific calls of thecurrent job or the job beingserviced

DMPJOBINT Dumps the machine internaldata related to the current job

DMPOBJ Dumps the contents and/orattributes of a specified objectstored in a library to a spooledprinter file

DMPSYSOBJ Dumps the contents, attri-butes, or both, of any object, ageneric group of objects, or allobjects to a spooled printer file

DMPTAP Dumps label information, datablocks, or both, from labeledor unlabeled tapes to aspooled printer file

DMPTRC Dumps the performance datafrom the trace table to a data-base file

PRTINTDTA Prints the dump file copiedfrom DMPJOBINT command


PROCEDURES

System/36 AS/400 AS/400 FunctionSTRSST Starts system service tools by

showing the System ServiceTools main menu

DFU STRDFU Starts the Data File Utility(DFU) program

STRPGMMNU Starts the programmer menu

DISABLE VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object

DOCCNV None Function not supported or nolonger required on the AS/400system

DSU STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options



WRKMBRPDM Allows you to work with lists ofmembers

DUMP DMPCLPGM Dumps all variables declaredin a CL program and all mes-sages in the program'smessage queue to a spooledprinter file

DMPDLO Dumps the contents and/orattributes, or both, of folders,documents, or internal docu-ment library system objects toa printer file

DMPJOB Dumps the basic data struc-tures or specific calls of thecurrent job or the job beingserviced

DMPJOBINT Dumps the machine internaldata related to the current job

DMPOBJ Dumps the contents and/orattributes of a specified objectstored in a library to a spooledprinter file


PROCEDURES

System/36 AS/400 AS/400 FunctionDMPSYSOBJ Dumps the contents, attri-

butes, or both, of any object, ageneric group of objects, or allobjects to a spooled printer file


DMPTRC Dumps the performance datafrom the trace table to a data-base file

PRTINTDTA Prints the dump file copiedfrom DMPJOBINT command

STRSST Starts system service tools byshowing the System ServiceTools main menu

EDITNRD CHGDDMF Changes one or more of thevalues in the specified DDMfile

CRTDDMF Creates a distributed datamanagement file to define aremote file to the local system

RNMOBJ Renames a specified objectname and object type

EM3270 ENDPRTEML Ends printer emulation withoutending the job

STREML3270 Starts a 3270 device emulationsession

STRPRTEML Starts 3270 printer emulation

ENABLE VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object

ENTER STRDFU Starts the Data File Utility(DFU) program

CHGDTA Changes, adds, or deletesrecords in an existing data-base file

EPDOWNL STREML3270 Starts a 3270 device emulationsession


PROCEDURES

System/36 AS/400 AS/400 FunctionEPLMRG None Function not supported or no

longer required on the AS/400system

EP3270 STREML3270 Starts a 3270 device emulationsession

ERAP STRSST Starts system service tools byshowing the System ServiceTools main menu

ERR SNDBRKMSG Sends a message to one ormore work station messagequeues

SNDPGMMSG Sends a message from aprogram to a user, systemoperator, user profile messagequeue, or all active users

SNDUSRMSG Sends a message from aprogram to a message queueand receives a reply

ES3270 STREML3270 Starts a 3270 device emulationsession

STRPRTEML Starts 3270 printer emulation

FORMAT CRTDSPF Creates a device file to definea display station to the system

CHGDSPF Changes (in the filedescription) one or more of theattributes of the specifieddisplay device file

CRTS36DSPF Creates a display file fromSystem/36 SFGR source

FLIB ADDLIBLE Adds a library name to thelibrary list

CHGCURLIB Changes the current libraryentry of the library list

FORTGO CALL Calls a specified program andpasses control to it

FORTONL STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options


PROCEDURES

System/36 AS/400 AS/400 FunctionFORTP STRPDM Calls the Programming Devel-

opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options

FORTRANC CRTFTNPGM Compiles a FORTRAN/400*source program into an objectprogram

FORTSDA STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options

STRSDA Starts the screen design aidmain menu and allows usersto create or change a displayformat interactively

FORTSEU STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options


FROMLIBR CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device

CPYTODKT Copies a database or devicefile to diskette

CPYTOTAP Copies records to a tape filefrom a physical, logical, orspooled inline file, from tape,or from diskette in a specifiedblock format

SAVOBJ Saves objects located in thesame library to tape, diskette,or a save file on disk

SAVS36LIBM Saves a copy of source filemembers on diskette or tape

HELP Replaced Replaced by online help infor-mation for commands


PROCEDURES

System/36 AS/400 AS/400 FunctionHISTORY DSPJOBLOG Displays commands and

related job messages

DSPLOG Displays the contents of thehistory log

GOCMDLOG

Displays a menu of commandsrelating to logs

ICFDEBUG TRCICF Traces all ICF functions thatoccur within the job thatentered the command

ICVERIFY None Function not supported or nolonger required on the AS/400system

IDDU STRIDD Starts IDDU

WRKDTADCT Allows a user to work with thecontents of a data dictionary

IDDUDCT CRTDTADCT Creates a data dictionary

WRKDTADCT Allows a user to work with thecontents of a data dictionary

IDDUDFN STRIDD Starts IDDU

DSPDTADCT Displays or prints the contentsof a field, record format, or filedefinition

DSPDBR Displays or prints relationalinformation about databasefiles, record formats, andlibraries

DSPFFD Displays or prints field-levelinformation for one or morefiles in one library or alllibraries that the user canaccess

WRKDTADFN Allows a user to work withdata definitions

IDDUDISK CRTPF Creates a physical file

STRDFU Starts the Data File Utility(DFU) program

WRKDBFIDD Shows the IDDU Work withDatabase Files display whereyou can select an option tocreate physical files or enterdata into a file

IDDULINK STRIDD Starts IDDU


PROCEDURES

System/36 AS/400 AS/400 FunctionLNKDTADFN Links or unlinks file definitions

in a dictionary and program-described files

IDDUPRT STRIDD Starts IDDU

DSPFFD Displays or prints field-levelinformation for one or morefiles in one library or alllibraries that the user canaccess

DSPDBR Displays or prints relationalinformation about databasefiles, record formats, andlibraries

DSPDTADCT Displays or prints the contentsof a field, record format, or filedefinition

IDDURBLD None Function not supported or nolonger required on the AS/400system

IDDUXLAT None Function not supported or nolonger required on the AS/400system

INIT CLRDKT Clears all files from a diskette

INZDKT Initializes identification infor-mation and sets the format ona diskette

RNMDKT Changes the volume identifierof a diskette or changes thename of its owner

INITDIAG INZDKT Initializes identification infor-mation and sets the format ona diskette

INIT9332 None Function not supported or nolonger required on the AS/400system

INQUIRY DSPDTA Displays the contents of adatabase physical file undercontrol of a DFU program


IPL PWRDWNSYS Powers down the system


PROCEDURES

System/36 AS/400 AS/400 FunctionITF STRITF Starts sending and receiving

data through different applica-tions

JOBSTR CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device

RSTS36LIBM Reads a file containing librarymembers, creates databasesource or data file memberson the AS/400 system, andcopies the member data fromthe file into each restoredmember

SBMJOB Allows a job that is running tosubmit another job to a jobqueue to be run later as abatch job

CPYFRMDKT Copies one or more files fromdiskette to an output file or toa printer

KEYS GOCMDKBD

Displays a menu of commandsrelating to keyboards

KEYSORT None Function not supported or nolonger required on the AS/400system

LIBRLIBR CPYLIB Copies a library and all of itsobjects to another library

CRTDUPOBJ Copies one or a group ofobjects from one library toanother

CRTSRCPF Creates a database file tocontain source statements

LINES OVRPRTF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed

LIST GOCMDQRY

Displays a menu of commandsrelating to queries

LISTDATA CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device


PROCEDURES

System/36 AS/400 AS/400 FunctionCPYFRMDKT Copies one or more files from

diskette to an output file or toa printer

CPYFRMTAP Copies records from a tape fileto a physical file, diskette,tape, or program-describedprinter file

CPYSRCF Copies a database source fileto a physical source file

DSPPFM Displays a physical databasefile member

LISTFILE CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device

CPYFRMDKT Copies one or more files fromdiskette to an output file or toa printer

CPYFRMTAP Copies records from a tape fileto a physical file, diskette,tape, or program-describedprinter file

CPYSRCF Copies records from a tape fileto a physical file, diskette,tape, or program-describedprinter file


DSPDKT Displays the volume label andthe data file identifier on adiskette

DSPTAP Displays the volume label anddata file label information on atape

LISTLIBR CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device

DSPLIB Displays the contents of oneor more libraries


PROCEDURES

System/36 AS/400 AS/400 FunctionDSPOBJD Displays the names and attri-

butes of specified objects in aspecified library

STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options

LISTNRD DSPDDMF Displays or prints detailedinformation about the specifiedDDM file

WRKDDMF Displays a list of DDM files,which allows you to change,delete, create, and do otherwork with DDM files

LOG CHGJOB Changes the attributes of a job

CHGSYSVAL Changes the current value ofthe specified system value

CHGJOBD Changes the attributes speci-fied for a job description object

MAINTX25 None Function not supported or nolonger required on the AS/400system

MCSCONV None Function not supported or nolonger required on the AS/400system

MOVEFLDR None Function not supported or nolonger required on the AS/400system

MSGFILE CRTMSGQ Creates a user-definedmessage queue

DLTMSGQ Deletes the specified messagequeue

DSPMSG Displays messages received atthe specified message queue

GOCMDMSG

Displays a menu of commandsrelating to messages

RMVMSG Removes the specifiedmessage or group of mes-sages from the specifiedmessage queue

MSRJE ENDRJESSN Ends a remote job entrysession for a specified session


PROCEDURES

System/36 AS/400 AS/400 FunctionGOCMDRJE

Displays a menu of commandsrelating to remote job entry

SBMRJEJOB Submits a remote job entryinput stream to the hostsystem as a batch job

STRRJESSN Starts a remote job entrysession for a specified session

WRKRJESSN Allows a user to work withinformation about an activeremote job entry (RJE) session

NOHALT ADDMSGD Describes a message andstores it in a specifiedmessage file

CHGMSGD Changes an existing messagedescription stored in a speci-fied message file

CHGRPYLE Changes the message ID,comparison data, message, ordump attributes of the reply


DSPMSGD Displays detailed informationabout messages in a messagefile

MONMSG Monitors the messages sent tothe program message queue

WRKRPYLE Allows a user to work withreply entries currently in thesystem message reply list

OFCBPRT STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively

OFCCAL STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively

OFCCANCL ENDSBS Ends the processing in a spec-ified subsystem or all subsys-tems

OFCCOMM None Function not supported or nolonger required on the AS/400system


PROCEDURES

System/36 AS/400 AS/400 FunctionCFGDSTSRV Changes the configuration of

the distribution network

OFCDATA SAVOBJ Saves objects located in thesame library to tape, diskette,or a save file on disk

SAVLIB Saves libraries to tape,diskette, or a save file on disk

SAVDLO Saves the specified docu-ments or folders to tape,diskette, or a save file on disk


OFCDFLT STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively

OFCDIR WRKDIR Allows user to work interac-tively with a set of displays toview, add, change, andremove entries in the systemdirectory

OFCFILE WRKDOC Allows a user to work with theword processing function

OFCGRP WRKDSTL Allows a user to work with dis-tribution lists

OFCINSTL RSTLICPGM Restores an IBM licensedprogram from tape for initialinstallation or new releaseinstallation

OFCLDF STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively

OFCMAIL STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively

OFCMAINT CFGDSTSRV Changes the configuration ofthe distribution network

OFCMSG SNDMSG Sends a message from oneuser to one or more messagequeues

STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively


PROCEDURES

System/36 AS/400 AS/400 FunctionOFCQ WRKDSTQ Allows the user to work with

distribution requests on thedistribution queues

WRKDOCPRTQ Allows the user to work withthe word processing function

OFCSRCH STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively

OFCSTAT STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively

OFCUSER STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively

OLINK None Function not supported or nolonger required on the AS/400system

ORGANIZE CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device


PASSTHRU STRPASTHR Starts a pass-through sessionand allows the user to sign ona remote system as if the userwere locally attached

PASSWORD CHGDSTPWD Changes the passwordshipped with the system forthe security officer user profile(QSECOFR)

CHGPRF Changes the values of a user'sprofile

CHGPWD Changes a user's password

CHGUSRPRF Changes the values specifiedin a user profile

PATCH DMPOBJ Dumps the contents and/orattributes of a specified objectstored in a library to a spooledprinter file


PROCEDURES

System/36 AS/400 AS/400 FunctionDMPSYSOBJ Dumps the contents, attri-

butes, or both, of any object, ageneric group of objects, or allobjects to a spooled printer file


PCEXCH None Function not supported or nolonger required on the AS/400system

PCEXEC STRPCCMD Starts a single PC applicationor DOS command on the per-sonal computer

PCOPROF CHGPCOPRF Allows you to specify if youwant to use DisplayWrite* 4 orOfficeVision/400* as your texteditor

MENUPCOMNU

GOPCOMNU

Shows the AS/400 PC SupportOrganizer display

PCU CVTTOFLR Converts a virtual disk into afolder and PC documents

CPYFRMPCD Copies the data from a PCdocument into a physical data-base file on the AS/400system

CPYTOPCD Copies the contents of amember from a physical data-base file on the AS/400system to a PC document in afolder

POST GOCMDCPY

Displays a menu of commandsrelating to copying

PRINT CHGDEVxxxx Changes a device descriptionwhere xxxx is the device classor type

CHGJOB Changes the attributes of a job


CRTPRTF Creates a printer device file


PROCEDURES

System/36 AS/400 AS/400 FunctionOVRPRTF Overrides the file named, over-

rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed

PRINTKEY CHGDEVxxxx Changes a device descriptionwhere xxxx is the device classor type



PROBLEM ANZPRB Shows the Analyze Problemsmenu, and allows the user toanalyze or report problems notdetected by the system

DSPPRB Displays or prints service-related information for hard-ware or programming

WRKPRB Allows a user to work with theproblems that were detectedby the system or by the user

PRTGRAPH DSPGDF Displays, prints, or plots agraphics data file


PTF APYPTF Applies PTFs to a specifiedlicensed program

DSPPTF Displays or prints the programtemporary fixes for a specifiedlicensed program

LODPTF Loads program temporaryfixes for a specified licensedprogram from the servicesupport system, tape, diskette,or a save file on disk

RMVPTF Removes a program tempo-rary fix from a specifiedlicensed program

QRY GOCMDQRY

Displays a menu of commandsrelating to queries

STRQRY Starts the Query function byshowing the Query main menu


PROCEDURES

System/36 AS/400 AS/400 FunctionWRKQRY Allows you to work with a

query definition and to run aquery

QRYDE STRDFU Starts the Data File Utility(DFU) program


UPDDTA Creates and runs a temporarydata file utility (DFU) program,which allows you to update adatabase file

QRYRUN RUNQRY Runs an existing query or adefault query if only the filename is specified


WRKQRY Allows you to work with aquery definition and to run aquery

READINFO DSPDOC Allows the user to display adocument using the word pro-cessing function of theOfficeVision/400 program

REMOVE DLTF Deletes a specified databaseor device files

DLTMSGF Deletes the specified messagefile including messagedescriptions stored in the file

DLTPGM Deletes a compiled program orgroup of programs

RMVM Removes the specifiedmember from a specified phys-ical or logical file

RENAME RNMDLO Changes the name of a docu-ment or folder

RNMOBJ Renames a specified objectname and object type

CLRMSGQ Clears all messages from aspecified message queue

REQUESTX None Function not supported or nolonger required on the AS/400system


PROCEDURES

System/36 AS/400 AS/400 FunctionRESPONSE ADDMSGD Describes a message and

stores it in a specifiedmessage file

ADDRPYLE Adds a message entry to thesystem-wide automaticmessage reply list

CHGMSGD Changes an existing messagedescription stored in a speci-fied message file

CHGRPYLE Changes the message ID,comparison data, message, ordump attributes of the reply

MONMSG Monitors the messages sent tothe program message queue

RMVMSGD Removes a messagedescription from a specifiedmessage file

WRKRPYLE Allows a user to work withreply entries currently in thesystem message reply list

RESTEXTN CPYIGCTBL Copies part or all of a double-byte character set font tablefrom system storage to tape ordiskette, or from tape ordiskette into system storage

RESTFLDR RSTDLO Restores filed documents, dis-tribution documents, andfolders from tape, diskette, ora save file on disk

RSTLIB Restores user libraries savedto tape, diskette, or a save fileon disk

RESTLIBR RSTLIB Restores user libraries savedto tape, diskette, or a save fileon disk



PROCEDURES

System/36 AS/400 AS/400 FunctionRESTNRD RSTLIB Restores user libraries saved

to tape, diskette, or a save fileon disk

RSTOBJ Restores objects to a singlelibrary saved from tape,diskette, or a save file on disk

RESTORE RSTOBJ Restores objects to a singlelibrary saved from tape,diskette, or a save file on disk

RSTS36F Reads a file, (optionally)creates a database physical orlogical file (if it does notalready exist), and copies anydata into the file

RETRIEVE RSTDLO Restores filed documents, dis-tribution documents, andfolders from tape, diskette, ora save file on disk

RJFILE CVTRJEDTA Converts compressed AS/400system database files todecompressed database fileswritten either to another data-base or to AS/400 systemprinter device files

STRRJERDR Starts reading a remote jobentry (RJE) file

RJTABLE ADDFCTE Adds a forms entry to anexisting forms control table

CRTFCT Creates a forms control tablewith no entries

CRTFORMDF Creates a form definition froma physical file

ROLLKEYS CHGPRF Changes the values of a user'sprofile


SETKBDMAP Sets new key assignments forthe Program Attention (PA)and Program Function (PF)keys

RPGC CRTRPGPGM Creates (compiles) an autoreport RPG program

RPGONL STRPGMMNU Starts the programmer menu


PROCEDURES

System/36 AS/400 AS/400 FunctionSTRPDM Calls the Programming Devel-

opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options

RPGP STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options


RPGR STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options

RPGSDA STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options

STRSDA Starts the screen design aidmain menu and allows usersto create or change a displayformat interactively

RPGSEU STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options


RPGX CRTRPGPGM Creates (compiles) an autoreport RPG program

SAVE SAVOBJ Saves objects located in thesame library to tape, diskette,or a save file on disk

SAVSTG Saves the licensed internalcode and the contents of auxil-iary storage to tape


PROCEDURES

System/36 AS/400 AS/400 FunctionSAVS36F Creates a copy of a database

physical or logical file todiskette or tape magneticmedia that can be restored ona System/36 or to a physicalfile that can be sent to aSystem/36

SAVEEXTN CPYIGCTBL Copies part or all of a double-byte character set font tablefrom system storage to tape ordiskette, or from tape ordiskette into system storage

SAVEFLDR SAVDLO Saves the specified docu-ments or folders to tape,diskette, or a save file on disk


SAVSECDTA Saves all security informationto tape, diskette, or save fileon disk

SAVELIBR SAVLIB Saves libraries to tape,diskette, or a save file on disk

SAVS36LIBM Saves a copy of source filemembers on diskette or tape

SAVENRD SAVCHGOBJ Saves a changed object orgroup of objects located in thesame library to tape, diskette,or a save file on disk


SAVOBJ Saves objects located in thesame library to tape, diskette,or a save file on disk


SDA STRSDA Starts the screen design aidmain menu and allows usersto create or change a displayformat interactively

SECDEF CHGSYSVAL Changes the current value ofthe specified system value

SECEDIT CHGAUTLE Changes user's authority or anauthorization list


PROCEDURES

System/36 AS/400 AS/400 FunctionCHGCFGL Changes a configuration list

CHGDLOAUT Changes the authority to adocument or folder

CHGDLOOWN Changes ownership of a docu-ment or folder from one userto another

CHGDSTPWD Changes the DedicatedService Tools (DST) password

CHGOBJOWN Transfers ownership of anobject from one user toanother


CHGPWD Changes a user's password


CHKPWD Checks the password associ-ated with a user's profile

CRTCFGL Creates a list of remotelocation names and remotelocation identifiers for thespecified communications type

CRTUSRPRF Creates a user profile todescribe a user to the system

DLTAUTHLR Deletes an authority holder foran associated resource

DLTCFGL Deletes a list of remotelocation names and remotelocation identifiers for thespecified communications type

DLTUSRPRF Deletes an individual userprofile or a group profile fromthe system

DSPDLOAUT Displays a list of users andtheir authorities assigned to aspecified document or folder

GRTOBJAUT Grants specific authority for anamed object, a generic groupof objects, or all objects

RMVAUTLE Removes a user from anauthorization list


PROCEDURES

System/36 AS/400 AS/400 FunctionRMVDLOAUT Removes a user's specific

authority to a document orfolder

RTVUSRPRF Retrieves values stored andassociated with a user anduses those values in a CLprogram

RTVAUTLE Retrieves the authorities that auser has on an authorizationlist

RVKOBJAUT Deletes specific authorities toan object for a user

RVKUSRPMN Revokes the permission froma user to handle documentsand folders for another user

WRKOBJOWN Allows a user to work with alist of objects owned by aspecified user profile

WRKUSRPRF Allows a user to work with adescription of an existing userprofile

SECLIST CHGCFGL Changes a configuration list

CHGDEVxxxx Changes a device descriptionwhere xxxx is the device classor type

CRTCFGL Creates a list of remotelocation names and remotelocation identifiers for thespecified communications type

CRTDEVxxxx Creates a device descriptionwhere xxxx is the device classor type

DSPAUTHLR Displays all authority holderson the system

DSPAUTLDLO Displays a list of documentsand folders whose security isspecified on the specifiedauthorization list

DSPAUTUSR Displays a list of users andinformation about those userswho are authorized to use thesystem


PROCEDURES

System/36 AS/400 AS/400 FunctionDSPDLOAUT Displays a list of users and

their authorities assigned to aspecified document or folder

DSPOBJAUT Displays a list of usersassigned to an object

DSPPGMADP Displays a list of programs thatuse the authority of a specified(owner) user profile or groupprofile

DSPSYSVAL Displays the name and valueof a specified system value

DSPUSRPRF Displays the user profile infor-mation

SECREST RSTAUT Restores authorities that werespecifically assigned to a userprofile

RSTUSRPRF Restores the basic parts of auser profile or a set of userprofiles

SECSAVE SAVSECDTA Saves all security informationto tape, diskette, or save fileon disk


SAVSYS Saves the licensed internalcode and QSYS library

SERVICE ANZPRB Shows the Analyze Problemsmenu, and allows the user toanalyze or report problems notdetected by the system


SERVLOG ANZPRB Shows the Analyze Problemsmenu, and allows the user toanalyze or report problems notdetected by the system

WRKPRB Allows a user to work with theproblems that were detectedby the system or by the user


PROCEDURES

System/36 AS/400 AS/400 FunctionSET CHGDEVxxxx Changes a device description

where xxxx is the device classor type


OVRPRTF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed

SETALERT CHGMSGD Changes an existing messagedescription stored in a speci-fied message file

SETCOMM GOCFGCMN



SETDUMP ADDBKP Adds breakpoints in a programbeing debugged

GOCMDDBG

Displays a menu of commandsrelating to debugging

GOCMDBKP

Displays a menu of commandsrelating to breakpoints

RMVBKP Removes one or more break-points from the program beingdebugged

STRCBLDBG Starts the debugging state-ments from a COBOL program

STRDBG Starts a job in debug mode

SEU STRSEU Calls the source entry utility(SEU) program and displaysthe main menu

SLIB ADDLIBLE Adds a library name to thelibrary list

CHGCURLIB Changes the current libraryentry of the library list

SMF STRPFRT Starts the Performance Toolslicensed program main menu

SMFDATA DSPPFRDTA Displays performance data col-lected


PROCEDURES

System/36 AS/400 AS/400 FunctionENDSAM Ends the running environment

defined in the STRSAMcommand

ENDSAMCOL Ends sampling data and writesthe collected sample data in adatabase file member

STRPFRMON Starts a collection of perfor-mance statistics based onspecified values and writes thestatistics to system-supplieddatabase files

STRSAM Periodically samples themachine interface instructionaddress while running speci-fied programs

STRSAMCOL Starts sample address monitordata collection and collectssample data defined by theSTRSAM command

SMFPRINT PRTRSCRPT Prints a usage report fordevices from data collected bythe OS/400 performancemonitor

PRTSAMDTA Prints a report of the sampleddata collected by theSTRSAMCOL command andrecorded by the ENDSAMCOLcommand

STRPFRT Starts the Performance Toolslicensed program main menu

SMFSTART STRPFRMON Starts a collection of perfor-mance statistics based onspecified values and writes thestatistics to system-supplieddatabase files

SMFSTOP ENDPFRMON Ends collection of performancestatistics

SORT FMTDTA Formats sort file contents

SRTX FMTDTA Formats sort file contents

STARTM VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object


PROCEDURES

System/36 AS/400 AS/400 FunctionSTATEST VFYCMN Shows the Verify a Commu-

nications Line display

STOPGRP ENDMOD Ends a single mode or allactive modes for a specificadvanced program-to-programcommunications (APPC)remote location

STOPM VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object

STRTGRP STRMOD Starts a single mode or allmodes currently in use for anAPPC remote location

VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object

SWITCH CHGJOB Changes the attributes of a job


SYSLIST None Function not supported or nolonger required on the AS/400system

TAPECOPY CPYFRMTAP Copies records from a tape fileto a physical file, diskette,tape, or program-describedprinter file

CPYTOTAP Copies records to a tape filefrom a physical, logical, orspooled inline file, from tape,or from diskette in a specifiedblock format

TAPEINIT INZTAP Initializes tapes for use on thesystem

TAPESTAT DMPTAP Dumps label information, datablocks, or both, from labeledor unlabeled tapes to aspooled printer file


PROCEDURES

System/36 AS/400 AS/400 FunctionPRTERRLOG Places a formatted print file of

the data in the machine errorlog in a spooled printer devicefile named QPCSMPRT and isused by IBM service represen-tatives

TEXTCONV None Function not supported or nolonger required on the AS/400system

TEXTDCT CRTSPADCT Creates a user-defined dic-tionary

CHKDOC Checks spelling or performsgrade-level analysis of a docu-ment

TEXTDOC WRKDOC Allows a user to work with theword processing function

CRTDOC Creates a document

EDTDOC Edits a document using theword processing function ofOfficeVision/400

CHKDOC Checks spelling or performsgrade-level analysis of a docu-ment

PRTDOC Prints a document using theword processing function ofOfficeVision/400

TEXTFLDR CRTFLR Creates a folder

DSPFLR Displays or prints a list offolders and documents, orcreates a database file con-taining the list

WRKFLR Allows a user to work withfolders

TEXTOBJ WRKDOC Allows a user to work with theword processing function

TEXTPROF WRKTXTPRF Allows a user to work with textprofiles

TEXTPRTQ WRKOUTQ Allows a user to work with theoverall status of all outputqueues


PROCEDURES

System/36 AS/400 AS/400 FunctionWRKDOC Allows a user to work with the

word processing function

CHGOUTQ Changes the attributes of theoutput queue

TEXTREL RLSOUTQ Releases the spooled files thatwere previously held on thespecified output queue

WRKOUTQ Allows a user to work with theoverall status of all outputqueues

TOLIBR RSTOBJ Restores objects to a singlelibrary saved from tape,diskette, or a save file on disk


TRACE DSPLOG Displays the contents of thehistory log

STRJOBTRC Starts the tracing function tocollect performance statisticsfor a specified job


TRCCSP Traces a CSP/AE application

TRCICF Traces all ICF functions thatoccur within the job thatentered the command

TRCINT Traces licensed internal codeand writes the data to aspooled printer file, to tape, orto diskette, or holds data ininternal storage

TRCJOB Traces program calls andreturns that occur in thecurrent job or in the job beingserviced by the Start ServiceJob command


PROCEDURES

System/36 AS/400 AS/400 FunctionTRANSFER CPYFRMDKT Copies one or more files from

diskette to an output file or toa printer

CPYTODKT Copies a database or devicefile to diskette

TRNMGR CRTLINxxxx Creates a line descriptionwhere xxxx is the line class ortype

CHGLINxxxx Changes a line descriptionwhere xxxx is the line class ortype

VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object

UPDATE CHGDTA Changes, adds, or deletesrecords in an existing data-base file


STRRMTSPT Creates and varies on all con-figuration objects needed forremote support

ENDRMTSPT Ends remote support

WSU None Function not supported or nolonger required on the AS/400system

WSUTXCR None Function not supported or nolonger required on the AS/400system

WSUTXEX None Function not supported or nolonger required on the AS/400system

WSUTXRV None Function not supported or nolonger required on the AS/400system


CONTROL COMMANDS

System/36 Control Commands toAS/400 Commands Cross-Reference

System/36 AS/400 AS/400 FunctionASSIGN(A) None Function not supported or no


CANCEL(C)job name

ENDJOB Ends the specified job

CANCEL(C)JOBQ(J)


CLRJOBQ Clears all batch jobs that arenot active from the specifiedjob queue

WRKJOBQ Allows a user to work with theoverall status of all job queues

CANCEL(C)PRT(P)

DLTSPLF Deletes a specified spooledfile from the output queue

CLROUTQ Clears spooled files from spec-ified queue

CANCEL(C)SESSION(S)


WRKUSRJOB Allows a user to work with alist of all jobs and provides arelease option to start a heldjob

CHANGE(G)COPIES

CHGSPLFA Changes the characteristics ofa spooled output file while it ison the output queue


CHANGE(G)DEFER



CHANGE(G)FORMS



CONTROL COMMANDS

System/36 AS/400 AS/400 FunctionWRKOUTQ Allows a user to work with the

overall status of all outputqueues

CHANGE(G)ID



CHANGE(G)JOBQ(J)



CHANGE(G)JOBS

CHGJOBQE Changes an existing job queueentry in the specified sub-system description

CHANGE(G)PRT(P)


CHANGE(G)PRTY


CHANGE(G)SEP


CHGWTR Changes the form type,number of file separators, andoutput queue attributes of anactive printer writer

CONSOLE CHGMSGQ Changes the characteristics ofa specified message queue


WRKMSGQ Allows a user to work withmessage queues

INFOMSG CHGJOB Changes the attributes of a job

CHGMSGQ Changes the characteristics ofa specified message queue

HOLDJOBQ(J)

HLDJOB Holds a job and prevents itfrom being processed


CONTROL COMMANDS

System/36 AS/400 AS/400 FunctionHOLD PRT(P) HLDSPLF Holds the specified output file

from additional processing bya spooling writer

HLDWTR Holds activity of the specifiedspooling writer at the end of arecord, a spooled file, or aprinted page

JOBQ(J) SBMDBJOB Submits from a job that is cur-rently running batch jobs readfrom a database

SBMDKTJOB Submits from a job that is cur-rently running batch jobs readfrom diskette

SBMFNCJOB Submits a batch job to allowfinance application programsto communicate with 4701 or4702 controller application pro-grams

SBMJOB Allows a job that is running tosubmit another job to a jobqueue to be run later as abatch job

SBMNETJOB Submits a batch job stream toa user on another system inthe network

SBMRJEJOB Submits a remote job entryinput stream to the hostsystem as a batch job

MENU GO xxxx Immediately displays a menushowing a group of commands(where xxxx is the name of aspecific group of commands;for example, GO CMDCRTdisplays a menu of all createcommands)

MODE None Function not supported or nolonger required on the AS/400system

MSG DSPMSG Displays messages received atthe specified message queue

SNDMSG Sends a message from oneuser to one or more messagequeues


CONTROL COMMANDS

System/36 AS/400 AS/400 FunctionSNDNETMSG Sends a message to a user on

a remote system


RCVMSG Receives a message sent to amessage queue

SNDBRKMSG Sends a message to one ormore work station messagequeues


OFF SIGNOFF Ends all interactive jobs orcauses all jobs in a group toend

POWER PWRDWNSYS Powers down the system

ENDSYS Ends all activity on the systemand leaves only the consoleactive

PRTY CHGJOB Changes the attributes of a job


RELEASE(L)JOBQ(J)

RLSJOB Releases a job for processingafter the job was held on thejob queue or was submitted tothe job queue as a held job



RELEASE(L)PRT(P)

RLSSPLF Releases a specified spooledfile being held on an outputqueue for processing by aspooling writer


CONTROL COMMANDS

System/36 AS/400 AS/400 FunctionWRKOUTQ Allows a user to work with the

overall status of all outputqueues

WRKWTR Allows a user to work with thestatus of all printers, allwriters, or a specified writer

REPLY DSPMSG Displays messages received atthe specified message queue

RESTART STRPRTWTR Starts a spooling writer thatsends output to a specifiedprinter

ENDWTR Ends the processing by thespecified spooling writer

START JOB RLSJOB Releases a job for processingafter the job was held on thejob queue or was submitted tothe job queue as a held job


STARTJOBQ(J)


DSPSBSD Displays subsystemdescription information

RLSJOBQ Releases for processing thejobs previously held

STARTPRT(P)

STRPRTWTR Starts a spooling writer thatsends output to a specifiedprinter

RLSWTR Releases a spooling writer thatwas previously held

RLSOUTQ Releases the spooled files thatwere previously held on thespecified output queue

STARTSERVICE

GOCMDPRBMGT

Displays a menu of commandsrelating to problem manage-ment

STARTSESSION(N) RLSCMNDEV

Releases the communicationscapability of a specified devicethat is being held


CONTROL COMMANDS

System/36 AS/400 AS/400 FunctionSTARTSYSTEM(S)

STRSBS Starts the subsystem activity

STARTWORKSTN(W)

WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions

STATUS(D)ALERT

WRKALR Allows a user to work interac-tively with alerts created by thelocal system or received fromanother system

STATUS(D)APPC(A)

DSPAPPNINFO Displays or prints APPN*network information

DSPMODSTS Displays the status of theAPPC device


STATUS(D)COMM(C)


STATUS(D)COMCNFIG(H)


STATUS(D)JOBQ(J)


WRKSBMJOB Allows a user to work with thestatus of all jobs submitted ata work station

STATUS(D)LINE(L)


STATUS(D)MESSAGE(G)


STATUS(D)MSRJE(M)

GOCMDRJE

Displays a menu of commandsrelating to remote job entry

WRKRJESSN Allows a user to work withinformation about an activeremote job entry (RJE) session

STATUS(D)PRT(P)



CONTROL COMMANDS

System/36 AS/400 AS/400 FunctionSTATUS(D)SESSION(S)

DSPJOB Displays information about jobstatus

WRKJOB Allows you to work with orchange information concerninga job

STATUS(D)SUBSESS(N)


WRKACTJOB Allows a user to work interac-tively with performance andstatus information for activejobs in a specified subsystemor all subsystems

STATUS(D)SUBSYS(I)


STATUS(D)SYSTASK(T)



STATUS(D)USERS(U)



STATUS(D)WORKSTN(W)


STATUS(D)WRT

WRKWTR Allows a user to work with thestatus of all printers, allwriters, or a specified writer

STATUSF(DF)JOBQ(J)



CONTROL COMMANDS

System/36 AS/400 AS/400 FunctionWRKSBMJOB Allows a user to work with the

status of all jobs submitted ata work station

STATUSF(DF)PRT(P)


STATUSF(DF)USERS(U)



STATUSF(DF)WORKSTN(W)


STOP JOBNAME

HLDJOB Holds a job and prevents itfrom being processed

STOPJOBQ(J)


DSPSBSD Displays subsystemdescription information

HLDJOBQ Holds processing of all jobs onthe job queue or added to thequeue

STOP PRT(P) ENDWTR Ends the processing by thespecified spooling writer


HLDOUTQ Holds all currently waitingspooled files and all spooledfiles added to the queue frombeing processed by a spoolingwriter

STOPSERVICE

GOCMDPRBMGT

Displays a menu of commandsrelating to problem manage-ment


OCL STATEMENTS

System/36 AS/400 AS/400 FunctionSTOPSESSION(N)

HLDCMNDEV Holds communications to aremote display station, printer,or system

STOPSYSTEM(S)

ENDSBS Ends the processing in a spec-ified subsystem or all subsys-tems

ENDSYS Ends all activity on the systemand leaves only the consoleactive


STOPWORKSTN(W)

HLDCMNDEV Holds communications to aremote display station, printer,or system

TIME DSPSYSVAL Displays the name and valueof a specified system value

VARY VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object


System/36 OCL Statements to AS/400Commands Cross-Reference

System/36 AS/400 AS/400 Function// ABEND None Function not supported or no


// ALLOCATE ALCOBJ Allocates an object or list ofobjects in a routing step forlater use in the routing step

// ATTR CHGJOB Changes the attributes of a job

// CHANGE CHGSPLFA Changes the characteristics ofa spooled output file while it ison the output queue

// CANCEL DLTSPLF Deletes a specified spooledfile from the output queue


OCL STATEMENTS

System/36 AS/400 AS/400 Function// COMM OVRICFDEVE Temporarily adds the program

device entry and the remotelocation name to the ICF file,or overrides a program devicewith the specified remotelocation name and attributesfor an ICF file

// COMPILE CRTxxxPGM Creates a program using thecorrect compiler where xxxcould be BAS (BASIC), CBL(COBOL), FTN (FORTRAN),or RPG.

// DATE CHGJOB Changes the attributes of a job

CHGSYSVAL Changes the current value ofthe specified system value

// DEALLOC DLCOBJ Releases the allocations ofspecified objects for the speci-fied lock status

// DEBUG STRDBG Starts a job in debug mode

// EVOKE SBMJOB Allows a job that is running tosubmit another job to a jobqueue to be run later as abatch job

// FILE (Disk) ALCOBJ Allocates an object or list ofobjects in a routing step forlater use in the routing step

OVRDBF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed

// FILEDiskette

OVRDKTF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed

// FILE (Tape) OVRTAPF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed

// FILELIB ADDLIBLE Adds a library name to thelibrary list


OCL STATEMENTS

System/36 AS/400 AS/400 FunctionCHGCURLIB Changes the current library

entry of the library list

// FORMS CRTPRTF Creates a printer device file

OVRPRTF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed

// IMAGE None Function not supported or nolonger required on the AS/400system

// INCLUDE CALL Calls a specified program andpasses control to it

// INFOMSG CHGJOB Changes the attributes of a job

CHGMSGQ Changes the characteristics ofa specified message queue

// JOBQ SBMJOB Allows a job that is running tosubmit another job to a jobqueue to be run later as abatch job

// LIBRARY CHGCURLIB Changes the current libraryentry of the library list


CHGLIBL Changes the user portion ofthe current job's library list byreplacing it with the list ofuser-specified libraries



// LOAD CALL Calls a specified program andpasses control to it

// LOCAL CHGDTAARA Changes the value of the localdata area, group data area, orspecified data area stored in alibrary

CHGVAR Changes the value of a CLvariable

// LOG CHGJOB Changes the attributes of a job


OCL STATEMENTS

System/36 AS/400 AS/400 FunctionCHGJOBD Changes the attributes speci-

fied for a job description object

// MEMBER ADDMSGD Describes a message andstores it in a specifiedmessage file

CRTMSGF Creates a user-definedmessage file

OVRMSGF Overrides a message file usedin a program


// MENU xxxx GO xxxx Immediately displays a menushowing a group of commands(where xxxx is the name of aspecific group of commands;for example, GO CMDCRTdisplays a menu of all createcommands)

// MSG SNDBRKMSG Sends a message to one ormore work station messagequeues

SNDMSG Sends a message from oneuser to one or more messagequeues

SNDNETMSG Sends a message to a user ona remote system



// NOHALT MONMSG Monitors the messages sent tothe program message queue

// OFF SIGNOFF Ends all interactive jobs orcauses all jobs in a group toend

// POWER PWRDWNSYS Powers down the system


OCL STATEMENTS

System/36 AS/400 AS/400 Function// PRINTER OVRPRTF Overrides the file named, over-

rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed

CHGPRTF Changes one or more of thecharacteristics of the specifiedprinter device files

// PROMPT DCLF Declares one file to a CLprogram

RCVF Used in a CL program toreceive data from a displaydevice or database file

SNDF Used (in a CL program) tosend a record to a displaydevice

SNDRCVF Used (in a CL program) tosend and receive data from adevice being used interactivelyby a user

// REGION None Function not supported or nolonger required on the AS/400system

// RESERVE None Function not supported or nolonger required on the AS/400system

// RUN CALL xxxx Calls a specified program andpasses control to it

// SESSION OVRICFDEVE Temporarily adds the programdevice entry and the remotelocation name to the ICF file,or overrides a program devicewith the specified remotelocation name and attributesfor an ICF file

// STARTPRT(P)

STRPRTWTR Starts a spooling writer thatsends output to a specifiedprinter

RLSWTR Releases a spooling writer thatwas previously held

RLSOUTQ Releases the spooled files thatwere previously held on thespecified output queue


OCL STATEMENTS

System/36 AS/400 AS/400 Function// STOPPRT(P)



HLDOUTQ Holds all currently waitingspooled files and all spooledfiles added to the queue frombeing processed by a spoolingwriter

// SWITCH CHGJOB Changes the attributes of a job


// SYSLIST None Function not supported or nolonger required on the AS/400system

// VARY VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object


// WAIT DLYJOB Allows your current job to waitfor a specified number ofseconds, or until a specifiedtime of day, before runningresumes

// WORKSTN OVRDSPF Overrides the file named in theprogram, overrides certainparameters of a file used bythe program, or overrides thefile named in the program andcertain parameters of the fileprocessed


Appendix. AS/400 ControlLanguage Commands

Following is a complete list of the AS/400 controllanguage (CL) commands showing the commandabbreviations and their descriptive names.

Command Descriptive Name

ADDACC Add Access CodeADDAJE Add Autostart Job EntryADDALRD Add Alert DescriptionADDAUTLE Add Authorization List EntryADDBKP Add BreakpointADDCALITM Add Calendar ItemADDCFGLE Add Configuration List EntriesADDCMNE Add Communications EntryADDCNNLE Add Connection List EntryADDCRSDMNK Add Cross Domain KeyADDDIRE Add Directory EntryADDDLOAUT Add Document Library Object AuthorityADDDSTLE Add Distribution List EntryADDDTADFN Add Data DefinitionADDFCTE Add Forms Control Table EntryADDICFDEVE Add Intersystem Communications Func-

tion Program Device EntryADDJOBQE Add Job Queue EntryADDLFM Add Logical File MemberADDLIBLE Add Library List EntryADDMSGD Add Message DescriptionADDNETJOBE Add Network Job EntryADDOFCENR Add Office EnrollmentADDOSIABSN Add OSI Abstract SyntaxADDOSIADJN Add OSI Adjacent NodeADDOSIAGT Add OSI AgentADDOSIAGTR Add OSI Agent RegistrationADDOSIAPPE Add OSI Application EntityADDOSIAPPM Add OSI Application ModeADDOSIAPPX Add OSI Application ContextADDOSIAUNN Add OSI Authority NicknameADDOSICLPS Add OSI Connectionless-Mode Path SetADDOSICMPS Add OSI Connection-Mode Path SetADDOSIDUAR Add OSI Directory User Agent Registra-

tionADDOSIIX25 Add OSI Inbound X.25 AttributesADDOSILINE Add OSI LineADDOSILINS Add OSI Line SetADDOSIMGR Add OSI Manager



ADDOSIMGRR Add OSI Manager RegistrationADDOSINSAP Add OSI NSAP AddressADDOSIOX25 Add OSI Outbound X.25 AttributesADDOSIQOSM Add OSI X.25 QOS ModeADDOSIRTE Add OSI RouteADDOSISSEL Add OSI Local Service Access Point

SelectorADDOSISUBN Add OSI SubnetworkADDOSITPTM Add OSI Transport ModeADDPFM Add Physical File MemberADDPFRCOL Add Performance CollectionADDPFVLM Add Physical File Variable-Length

MemberADDPGM Add ProgramADDPJE Add Prestart Job EntryADDREXBUF Add REXX BufferADDRJECMNE Add RJE Communications EntryADDRJERDRE Add RJE Reader EntryADDRJEWTRE Add RJE Writer EntryADDRPYLE Add Reply List EntryADDRTGE Add Routing EntryADDSCHIDXE Add Search Index EntryADDSOCE Add Sphere of Control EntryADDTCPLNK Add TCP/IP LinkADDTCPPORT Add TCP/IP Port EntryADDTCPRSI Add TCP/IP Remote System InformationADDTCPRTE Add TCP/IP Route EntryADDTRAINF Add TRLAN Adapter InformationADDTRC Add TraceADDWSE Add Work Station EntryALCOBJ Allocate ObjectANSLIN Answer LineANSQST Answer QuestionsANZACCGRP Analyze Access GroupANZDBF Analyze Database FileANZDBFKEY Analyze Database File KeysANZPFRDTA Analyze Performance DataANZPGM Analyze ProgramANZPRB Analyze ProblemANZQRY Analyze QueryANZS34OCL Analyze System/34 OCLAPYJRNCHG Apply Journaled ChangesAPYPTF Apply Program Temporary FixASKQST Ask QuestionBCHJOB Batch JobCALL Call ProgramCFGDSTSRV Configure Distribution ServicesCFGOSI Configure OSICFGRPDS Configure VM/MVS Bridge



CFGTCP Configure TCP/IPCHGACGCDE Change Accounting CodeCHGAJE Change Autostart Job EntryCHGALRD Change Alert DescriptionCHGALRTBL Change Alert TableCHGAUTLE Change Authorization List EntryCHGCALAUT Change Calendar AuthorityCHGCFGL Change Configuration ListCHGCLNUP Change CleanupCHGCLS Change ClassCHGCMD Change CommandCHGCMDDFT Change Command DefaultCHGCMNE Change Communications EntryCHGCNNL Change Connection ListCHGCNNLE Change Connection List EntryCHGCOSD Change Class-of-Service DescriptionCHGCRSDMNK Change Cross Domain KeyCHGCSI Change Communications Side InformationCHGCSPPGM Change CSP/AE ProgramCHGCTLAPPC Change Controller Description (APPC)CHGCTLASC Change Controller Description (Async)CHGCTLBSC Change Controller Description (BSC)CHGCTLFNC Change Controller Description (Finance)CHGCTLHOST Change Controller Description (SNA Host)CHGCTLLWS Change Controller Description (Local

Work Station)CHGCTLNET Change Controller Description (Network)CHGCTLRTL Change Controller Description (Retail)CHGCTLRWS Change Controller Description (Remote

Work Station)CHGCTLTAP Change Controller Description (TAPE)CHGCTLVWS Change Controller Description (Virtual

Work Station)CHGCURLIB Change Current LibraryCHGDBG Change DebugCHGDDMF Change Distributed Data Management

FileCHGDEVAPPC Change Device Description (APPC)CHGDEVASC Change Device Description (Async)CHGDEVBSC Change Device Description (BSC)CHGDEVDKT Change Device Description (Diskette)CHGDEVDSP Change Device Description (DisplayCHGDEVFNC Change Device Description (Finance)CHGDEVHOST Change Device Description (SNA Host)CHGDEVINTR Change Device Description (Intrasystem)CHGDEVNET Change Device Description (Network)CHGDEVPRT Change Device Description (Printer)CHGDEVRTL Change Device Description (Retail)CHGDEVSNUF Change Device Description (SNUF)CHGDEVTAP Change Device Description (Tape)

Appendix. AS/400 Control Language Commands 55


CHGDIRE Change Directory EntryCHGDKTF Change Diskette FileCHGDLOAUT Change Document Library Object

AuthorityCHGDLOOWN Change Document Library Object OwnerCHGDOCD Change Document DescriptionCHGDSPF Change Display FileCHGDSTD Change Distribution DescriptionCHGDSTPWD Change Dedicated Service Tools Pass-

wordCHGDTA Change DataCHGDTAARA Change Data AreaCHGFCNARA Change Functional AreaCHGFCT Change Forms Control TableCHGFCTE Change Forms Control Table EntryCHGGPHFMT Change Graph FormatCHGGPHPKG Change Graph PackageCHGGRPA Change Group AttributesCHGHLLPTR Change High-Level Language PointerCHGICFDEVE Change ICF Program Device EntryCHGICFF Change Intersystem Communications

Function FileCHGJOB Change JobCHGJOBD Change Job DescriptionCHGJOBQE Change Job Queue EntryCHGJRN Change JournalCHGKBDMAP Change Keyboard MapCHGLF Change Logical FileCHGLFM Change Logical File MemberCHGLIB Change LibraryCHGLIBL Change Library ListCHGLINASC Change Line Description (Async)CHGLINBSC Change Line Description (BSC)CHGLINETH Change Line Description (Ethernet)CHGLINIDLC Change Line Description for IDLCCHGLINSDLC Change Line Description (SDLC)CHGLINTDLC Change Line Description (TDLC)CHGLINTRN Change Line Description (Token-Ring

Network)CHGLINX25 Change Line Description (X.25)CHGMNU Change MenuCHGMODD Change Mode DescriptionCHGMSGD Change Message DescriptionCHGMSGQ Change Message QueueCHGMSTK Change Master KeyCHGNETA Change Network AttributesCHGNETJOBE Change Network Job EntryCHGNWIISDN Change Network Interface Description for

ISDN



CHGOBJD Change Object DescriptionCHGOBJOWN Change Object OwnerCHGOFCENR Change Office EnrollmentCHGOSIABSN Change OSI Abstract SyntaxCHGOSIADJN Change OSI Adjacent NodeCHGOSIAPPE Change OSI Application EntityCHGOSIAPPM Change OSI Application ModeCHGOSIAPPX Change OSI Application ContextCHGOSIAUNN Change OSI Authority NicknameCHGOSICLPS Change OSI Connectionless-Mode Path

SetCHGOSICMPS Change OSI Connection-Mode Path SetCHGOSIDUAR Change OSI Directory User Agent Regis-

trationCHGOSIIX25 Change OSI Inbound X.25 AttributesCHGOSILCLA Change OSI Local AttributesCHGOSILINE Change OSI LineCHGOSILINS Change OSI Line SetCHGOSIMGRR Change OSI Manager RegistrationCHGOSINSAP Change OSI NSAP AddressCHGOSIOX25 Change OSI Outbound X.25 AttributesCHGOSIQOSM Change OSI X.25 QOS ModeCHGOSIRTE Change OSI RouteCHGOSISSEL Change OSI Local Service Access Point

SelectorCHGOSISUBN Change OSI SubnetworkCHGOSITPTM Change OSI Transport ModeCHGOUTQ Change Output QueueCHGPCOPRF Change PC Support Organizer ProfileCHGPDGPRF Change Print Descriptor Group ProfileCHGPF Change Physical FileCHGPFM Change Physical File MemberCHGPFRCOL Change Performance CollectionCHGPGM Change ProgramCHGPGMVAR Change Program VariableCHGPJ Change Prestart JobCHGPJE Change Prestart Job EntryCHGPRB Change ProblemCHGPRF Change ProfileCHGPRTF Change Printer FileCHGPTR Change PointerCHGPWD Change PasswordCHGPWRSCD Change Power On/Off ScheduleCHGPWRSCDE Change Power On/Off Schedule EntryCHGQSTDB Change Question-and-Answer DatabaseCHGRJECMNE Change RJE Communications EntryCHGRJERDRE Change RJE Reader EntryCHGRJEWTRE Change RJE Writer EntryCHGRPYLE Change Reply List EntryCHGRTGE Change Routing Entry



CHGSAVF Change Save FileCHGSBSD Change Subsystem DescriptionCHGSCHIDX Change Search IndexCHGSHRPOOL Change Shared Storage PoolCHGSPLFA Change Spooled File AttributesCHGSRCPF Change Source Physical FileCHGSRVPVDA Change Service Provider AttributesCHGSSND Change Session DescriptionCHGSSNMAX Change Session MaximumCHGSYSLIBL Change System Library ListCHGSYSVAL Change System ValueCHGS34LIBM Change System/34 Library Member(s)CHGS36 Change System/36CHGS36MSGL Change System/36 Message ListCHGS36PGMA Change System/36 Program AttributesCHGS36PRCA Change System/36 Procedure AttributesCHGS36SRCA Change System/36 Source AttributesCHGTAPF Change Tape FileCHGTCPA Change TCP/IP AttributesCHGTCPLNK Change TCP/IP LinkCHGTCPRTE Change TCP/IP Route EntryCHGTRAINF Change TRLAN Adapter InformationCHGUSRPRF Change User ProfileCHGVAR Change VariableCHGWSE Change Work Station EntryCHGWTR Change WriterCHKDKT Check DisketteCHKDLO Check Document Library ObjectCHKDOC Check DocumentCHKIGCTBL Check DBCS Font TableCHKOBJ Check ObjectCHKPWD Check PasswordCHKRCDLCK Check Record LocksCHKTAP Check TapeCLOF Close FileCLRDKT Clear DisketteCLRJOBQ Clear Job QueueCLRLIB Clear LibraryCLRMSGQ Clear Message QueueCLROUTQ Clear Output QueueCLRPFM Clear Physical File MemberCLRRTLF Clear Retail FileCLRSAVF Clear Save FileCLRTRCDTA Clear Trace DataCMPJRNIMG Compare Journal ImagesCNLRJERDR Cancel RJE ReaderCNLRJEWTR Cancel RJE WriterCOMMIT CommitCPHDTA Cipher Data



CPROBJ Compress ObjectCPYCFGL Copy Configuration ListCPYDOC Copy DocumentCPYF Copy FileCPYFCNARA Copy Functional AreaCPYFRMDKT Copy from DisketteCPYFRMPCD Copy from PC DocumentCPYFRMQRYF Copy From Query FileCPYFRMTAP Copy from TapeCPYGPHFMT Copy Graph FormatCPYGPHPKG Copy Graph PackageCPYIGCSRT Copy IGC SortCPYIGCTBL Copy DBCS Font TableCPYLIB Copy LibraryCPYPFRDTA Copy Performance DataCPYPTF Copy Program Temporary FixCPYPTFSAVF Copy PTF Save FileCPYSPLF Copy Spooled FileCPYSRCF Copy Source FileCPYTODKT Copy to DisketteCPYTOPCD Copy to PC DocumentCPYTOTAP Copy to TapeCRTALRTBL Create Alert TableCRTAPAR Create Authorized Program Analysis

ReportCRTAUTHLR Create Authority HolderCRTAUTL Create Authorization ListCRTBASPGM Create Basic ProgramCRTCAL Create CalendarCRTCBLPGM Create COBOL ProgramCRTCFGL Create Configuration ListCRTCLD Create C Locale DescriptionCRTCLPGM Create Control Language ProgramCRTCLS Create ClassCRTCMD Create CommandCRTCNNL Create Connection ListCRTCOSD Create Class-of-Service DescriptionCRTCPGM Create C/400* ProgramCRTCSI Create Communications Side InformationCRTCSPAPP Create CSP/AE Application ObjectsCRTCSPMSGF Create CSP/AE User Message FileCRTCTLAPPC Create Controller Description (APPC)CRTCTLASC Create Controller Description (Async)CRTCTLBSC Create Controller Description (BSC)CRTCTLFNC Create Controller Description (Finance)CRTCTLHOST Create Controller Description (SNA Host)CRTCTLLWS Create Controller Description (Local Work

Station)CRTCTLNET Create Controller Description (Network)CRTCTLRTL Create Controller Description (Retail)



CRTCTLRWS Create Controller Description (RemoteWork Station)

CRTCTLTAP Create Controller Description (Tape)CRTCTLVWS Create Controller Description (Virtual

Work Station)CRTDDMF Create Distributed Data Management FileCRTDEVAPPC Create Device Description (APPC)CRTDEVASC Create Device Description (Async)CRTDEVBSC Create Device Description (BSC)CRTDEVDKT Create Device Description (Diskette)CRTDEVDSP Create Device Description (Display)CRTDEVFNC Create Device Description (Finance)CRTDEVHOST Create Device Description (SNA Host)CRTDEVINTR Create Device Description (Intrasystem)CRTDEVNET Create Device Description (Network)CRTDEVPRT Create Device Description (Printer)CRTDEVRTL Create Device Description (Retail)CRTDEVSNUF Create Device Description (SNUF)CRTDEVTAP Create Device Description (Tape)CRTDFUDSPF Create DFU Display FileCRTDKTF Create Diskette FileCRTDOC Create DocumentCRTDSPF Create Display FileCRTDSTL Create Distribution ListCRTDTAARA Create Data AreaCRTDTADCT Create a Data DictionaryCRTDTAQ Create Data QueueCRTDUPOBJ Create Duplicate ObjectCRTEDTD Create Edit DescriptionCRTFCNARA Create Functional AreaCRTFCT Create Forms Control TableCRTFLR Create FolderCRTFNTRSC Create Font ResourcesCRTFORMDF Create Form DefinitionCRTFTNPGM Create FORTRAN/400 ProgramCRTGDF Create Graphics Data FileCRTGPHFMT Create Graph FormatCRTGPHPKG Create Graph PackageCRTGSS Create Graphics Symbol SetCRTHSTDTA Create Historical DataCRTICFF Create Intersystem Communications

Function FileCRTIGCDCT Create DBCS Conversion DictionaryCRTJOBD Create Job DescriptionCRTJOBQ Create Job QueueCRTJRN Create JournalCRTJRNRCV Create Journal ReceiverCRTLASREP Create Local Abstract SyntaxCRTLF Create Logical File



CRTLIB Create LibraryCRTLINASC Create Line Description (Async)CRTLINBSC Create Line Description (BSC)CRTLINETH Create Line Description (Ethernet)CRTLINIDLC Create Line Description for IDLCCRTLINSDLC Create Line Description (SDLC)CRTLINTDLC Create Line Description (TDLC)CRTLINTRN Create Line Description (Token-Ring

Network)CRTLINX25 Create Line Description (X.25)CRTMNU Create MenuCRTMODD Create Mode DescriptionCRTMSGF Create Message FileCRTMSGFMNU Create Message File MenuCRTMSGQ Create Message QueueCRTNWIISDN Create Network Interface for ISDNCRTOUTQ Create Output QueueCRTOVL Create an OverlayCRTPAGDFN Create Page DefinitionCRTPAGSEG Create Page SegmentCRTPASPGM Create Pascal ProgramCRTPDG Create Print Descriptor GroupCRTPF Create Physical FileCRTPLIPGM Create PL/I Language ProgramCRTPNLGRP Create Panel GroupCRTPRTF Create Printer FileCRTQMFORM Create Query Management FormCRTQMQRY Create Query Management QueryCRTQSTDB Create Question and Answer DatabaseCRTQSTLOD Create Question-and-Answer LoadCRTRJEBSCF Create RJE BSC FileCRTRJECFG Create RJE ConfigurationCRTRJECMNF Create RJE Communications FileCRTRMCPGM Create RM/COBOL-85 ProgramCRTRPGPGM Create RPG/400* ProgramCRTRPTPGM Create Auto Report ProgramCRTRTLF Create Retail FileCRTRTLSRC Create Retail SourceCRTSAVF Create Save FileCRTSBSD Create Subsystem DescriptionCRTSCHIDX Create Search IndexCRTSPADCT Create Spelling Aid DictionaryCRTSQLC Create Structured Query Language CCRTSQLCBL Create Structured Query Language

COBOLCRTSQLFTN Create Structured Query Language

FORTRANCRTSQLPLI Create Structured Query Language PL/ICRTSQLRPG Create Structured Query Language RPGCRTSRCPF Create Source Physical File



CRTSSND Create Session DescriptionCRTS36CBL Create System/36 COBOLCRTS36DSPF Create System/36 Display FileCRTS36MNU Create System/36 MenuCRTS36MSGF Create System/36 Message FileCRTS36RPG Create System/36 RPGCRTS36RPGR Create System/36 RPGRCRTS36RPT Create System/36 Auto ReportCRTTAPF Create Tape FileCRTTBL Create TableCRTUSRPRF Create User ProfileCVTBASSTR Convert BASIC Stream FilesCVTBASUNF Convert BASIC Unformatted FilesCVTBGUDTA Convert BGU DataCVTCLSRC Convert CL SourceCVTDAT Convert DateCVTEDU Convert EducationCVTFRMRTLF Convert from Retail FileCVTPFRDTA Convert Performance DataCVTRJEDTA Convert RJE DataCVTS36CFG Convert System/36 ConfigurationCVTS36FCT Convert System/36 Forms Control TableCVTS36JOB Convert System/36 JobCVTS36QRY Convert System/36 QueryCVTS38JOB Convert System/38 JobCVTTOFLR Convert to FolderCVTTORTLF Convert to Retail FileDATA Add Data DefinitionDCL Declare CL VariableDCLF Declare FileDCPOBJ Decompress ObjectDLCOBJ Deallocate ObjectDLTALR Delete AlertDLTALRTBL Delete Alert TableDLTAUTHLR Delete Authority HolderDLTAUTL Delete Authorization ListDLTCAL Delete CalendarDLTCFGL Delete Configuration ListDLTCHTFMT Delete Chart FormatDLTCLD Delete C Locale DescriptionDLTCLS Delete ClassDLTCMD Delete CommandDLTCNNL Delete Connection ListDLTCOSD Delete Class-of Service DescriptionDLTCSI Delete Communications Side InformationDLTCSPMAP Delete CSP/AE Map GroupDLTCSPTBL Delete CSP/AE TableDLTCTLD Delete Controller DescriptionDLTDEVD Delete Device Description



DLTDFUPGM Delete DFU ProgramDLTDKTLBL Delete Diskette LabelDLTDLO Delete Document Library ObjectDLTDOCL Delete Document ListDLTDST Delete DistributionDLTDSTL Delete Distribution ListDLTDTAARA Delete Data AreaDLTDTADCT Delete Data DictionaryDLTDTAQ Delete Data QueueDLTEDTD Delete Edit DescriptionDLTF Delete FileDLTFCNARA Delete Functional AreaDLTFCT Delete Forms Control TableDLTFNTRSC Delete Font ResourcesDLTFORMDF Delete Form DefinitionDLTGPHFMT Delete Graph FormatDLTGPHPKG Delete Graph PackageDLTGSS Delete Graphics Symbol SetDLTHSTDTA Delete Historical DataDLTIGCDCT Delete DBCS Conversion DictionaryDLTIGCSRT Delete IGC SortDLTIGCTBL Delete DBCS Font TableDLTJOBD Delete Job DescriptionDLTJOBQ Delete Job QueueDLTJRN Delete JournalDLTJRNRCV Delete Journal ReceiverDLTLIB Delete LibraryDLTLICPGM Delete Licensed ProgramDLTLIND Delete Line DescriptionDLTMNU Delete MenuDLTMODD Delete Mode DescriptionDLTMSGF Delete Message FileDLTMSGQ Delete Message QueueDLTNETF Delete Network FileDLTNWID Delete Network Interface DescriptionDLTOUTMAIL Delete Outgoing MailDLTOUTQ Delete Output QueueDLTOVL Delete OverlayDLTOVR Delete OverrideDLTOVRDEVE Delete Override Device EntryDLTPAGDFN Delete Page DefinitionDLTPAGSEG Delete Page SegmentDLTPDG Delete Print Descriptor GroupDLTPFRDTA Delete Performance DataDLTPGM Delete ProgramDLTPNLGRP Delete Panel GroupDLTPRB Delete ProblemDLTPTF Delete PTFDLTQMFORM Delete Query Management FormDLTQMQRY Delete Query Management Query



DLTQRY Delete QueryDLTQST Delete QuestionDLTQSTDB Delete Question-and-Answer DatabaseDLTRJECFG Delete RJE ConfigurationDLTRTLF Delete Retail FileDLTRTLRCD Delete Retail RecordDLTSBSD Delete Subsystem DescriptionDLTSCHIDX Delete Search IndexDLTSPADCT Delete Spelling Aid DictionaryDLTSPLF Delete Spooled FileDLTSSND Delete Session DescriptionDLTTBL Delete TableDLTUSRIDX Delete User IndexDLTUSRPRF Delete User ProfileDLTUSRQ Delete User QueueDLTUSRSPC Delete User SpaceDLYJOB Delay JobDMPCLPGM Dump CL ProgramDMPDLO Dump Document Library ObjectDMPJOB Dump JobDMPJOBINT Dump Job InternalDMPOBJ Dump ObjectDMPSYSOBJ Dump System ObjectDMPTAP Dump TapeDMPTRC Dump TraceDO DoDSCJOB Disconnect JobDSPACC Display Access CodeDSPACCAUT Display Access Code AuthorityDSPACCGRP Display Access GroupDSPACTPJ Display Active Prestart JobsDSPAPPNINF Display APPN InformationDSPAUTHLR Display Authority HolderDSPAUTL Display Authorization ListDSPAUTLDLO Display Authorization List Document

Library ObjectsDSPAUTLOBJ Display Authorization List ObjectsDSPAUTUSR Display Authorized UsersDSPBKP Display BreakpointsDSPCALAUT Display Calendar AuthorityDSPCALD Display Calendar DescriptionDSPCALITM Display Calendar ItemDSPCFGL Display Configuration ListDSPCHT Display ChartDSPCLS Display ClassDSPCMD Display CommandDSPCNNL Display Connection ListDSPCNNSTS Display Connection StatusDSPCOSD Display Class-of-Service Description



DSPCSI Display Communications Side InformationDSPCSPOBJ Display CSP/AE ObjectDSPCTLD Display Controller DescriptionDSPDBG Display DebugDSPDBR Display Database RelationsDSPDDMF Display Distributed Data Management FileDSPDEVD Display Device DescriptionDSPDIR Display DirectoryDSPDKT Display DisketteDSPDLOAUT Display Document Library Object AuthorityDSPDOC Display DocumentDSPDSTL Display Distribution ListDSPDSTLOG Display Distribution LogDSPDSTSRV Display Distribution ServicesDSPDTA Display DataDSPDTAARA Display Data AreaDSPDTADCT Display Data DictionaryDSPEDTD Display Edit DescriptionDSPFD Display File DescriptionDSPFFD Display File Field DescriptionDSPFLR Display FolderDSPGDF Display Graphics Data FileDSPHDWRSC Display Hardware ResourcesDSPHFS Display Hierarchical File SystemsDSPHLPDOC Display Help DocumentDSPHSTGPH Display Historical GraphDSPIGCDCT Display DBCS Conversion DictionaryDSPJOB Display JobDSPJOBD Display Job DescriptionDSPJOBLOG Display Job LogDSPJRN Display JournalDSPJRNRCVA Display Journal Receiver AttributesDSPKBDMAP Display Keyboard MapDSPLCLHDW Display Local HardwareDSPLIB Display LibraryDSPLIBD Display Library DescriptionDSPLIBL Display Library ListDSPLIND Display Line DescriptionDSPLOG Display LogDSPMNUA Display Menu AttributesDSPMODD Display Mode DescriptionDSPMODSTS Display Mode StatusDSPMSG Display MessagesDSPMSGD Display Message DescriptionsDSPNETA Display Network AttributesDSPNWID Display Network Interface DescriptionDSPOBJAUT Display Object AuthorityDSPOBJD Display Object DescriptionDSPOSIABSN Display OSI Abstract SyntaxDSPOSIADJN Display OSI Adjacent Node



DSPOSIAPPE Display OSI Application EntityDSPOSIAPPM Display OSI Application ModeDSPOSIAPPX Display OSI Application ContextDSPOSIASN Display OSI AssociationsDSPOSIAUNN Display OSI Authority NicknameDSPOSICLPS Display OSI Connectionless-Mode Path

SetDSPOSICMPS Display OSI Connection-Mode Path SetDSPOSIDMN Display OSI Management DomainDSPOSIDUAR Display OSI Directory User Agent Regis-

trationDSPOSIERR Display OSI Error CountersDSPOSIIX25 Display OSI Inbound X.25 AttributesDSPOSILCLA Display OSI Local AttributesDSPOSILINE Display OSI LineDSPOSILINS Display OSI Line SetDSPOSIMGR Display OSI ManagerDSPOSIMGRR Display OSI Manager RegistrationDSPOSINSAP Display OSI NSAP AddressDSPOSIOX25 Display OSI Outbound X.25 AttributesDSPOSIPARM Display OSI ParametersDSPOSIPRF Display OSI ProfileDSPOSIQOSM Display OSI X.25 QOS ModeDSPOSIRTE Display OSI RouteDSPOSISAP Display Service Access PointsDSPOSISSEL Display OSI Local Service Access Point

SelectorDSPOSISTC Display OSI StatisticsDSPOSISTS Display OSI StatusDSPOSISUBN Display OSI SubnetworkDSPOSITHLD Display OSI ThresholdsDSPOSITPTM Display OSI Transport ModeDSPOVR Display OverrideDSPPDGPRF Display Print Descriptor Group ProfileDSPPFM Display Physical File MemberDSPPFRDTA Display Performance DataDSPPFRGPH Display Performance GraphDSPPGM Display ProgramDSPPGMADP Display Program AdoptDSPPGMREF Display Program ReferencesDSPPGMVAR Display Program VariableDSPPRB Display ProblemDSPPTF Display Program Temporary FixDSPPWRSCD Display Power On/Off ScheduleDSPRCDLCK Display Record LocksDSPRJECFG Display RJE ConfigurationDSPSAVF Display Save FileDSPSBSD Display Subsystem DescriptionDSPSFWRSC Display Software Resources



DSPSOCSTS Display Sphere of Control StatusDSPSPLF Display Spooled FileDSPSRVPVDA Display Service Provider AttributesDSPSRVSTS Display Service StatusDSPSYSVAL Display System ValueDSPS36 Display System/36DSPTAP Display TapeDSPTRAPRF Display TRLAN Adapter ProfileDSPTRC Display TraceDSPTRCDTA Display Trace DataDSPTRNSTS Display TRN StatusDSPUSRPMN Display User PermissionDSPUSRPRF Display User ProfileDSPWSUSR Display Work Station UserDUPDKT Duplicate DisketteDUPTAP Duplicate TapeEDTAUTL Edit Authorization ListEDTDEVRSC Edit Device ResourcesEDTDLOAUT Edit Document Library Object AuthorityEDTDOC Edit DocumentEDTIGCDCT Edit DBCS Conversion DictionaryEDTIGCTBL Edit DBCS TableEDTLIBL Edit Library ListEDTOBJAUT Edit Object AuthorityEDTQST Edit Questions and AnswersEDTRBDAP Edit Rebuild Of Access PathsEDTS36PGMA Edit System/36 Program AttributesEDTS36PRCA Edit System/36 Procedure AttributesEDTS36SRCA Edit System/36 Source AttributesEJTEMLOUT Eject Emulation OutputELSE ElseEMLPRTKEY Emulate Printer KeyENCCPHK Encipher Cipher KeyENCFRMMSTK Encipher from Master KeyENCTOMSTK Encipher to Master KeyENDBCHJOB End Batch JobENDCBLDBG End COBOL DebugENDCLNUP End CleanupENDCMTCTL End Commitment ControlENDCPYSCN End Copy ScreenENDCTLRCY End Controller RecoveryENDDBG End DebugENDDEVRCY End Device RecoveryENDDO End DoENDDSKCOL End Disk Data CollectionENDEPMENV End EPM EnvironmentENDGRPJOB End Group JobENDINP End InputENDJOB End JobENDJOBABN End Job Abnormal



ENDJOBTRC End Job TraceENDJRNAP End Journal Access PathENDJRNPF End Journal Physical File ChangesENDLINRCY End Line RecoveryENDMOD End ModeENDNWIRCY End Network Interface RecoveryENDOSI End OSI SubsystemENDOSIASN End OSI AssociationsENDOSINL End OSI Network ResourceENDPASTHR End Pass-ThroughENDPFRMON End Performance MonitorENDPGM End ProgramENDPJ End Prestart JobsENDPRTEML End Printer EmulationENDRCV End ReceiveENDRDR End ReaderENDRJESSN End RJE SessionENDRMTSPT End Remote SupportENDRQS End RequestENDSAM End Sampled Address MonitorENDSAMCOL End Sampled Address Monitor Data Col-

lectionENDSBS End SubsystemENDSRVJOB End Service JobENDSYS End SystemENDS36 End System/36ENDTCPCNN End TCP/IP ConnectionENDTCPLNK End TCP/IP LinkENDTIESSN End Technical Information Exchange

SessionENDWTR End WriterEXTPGMINF Extract Program InformationFILDOC File DocumentFMTDTA Format DataFNDSTRPDM Find String Using PDMGENCPHK Generate Cipher KeyGENCRSDMNK Generate Cross Domain KeyGENMAC Generate Message Authentication CodeGENPIN Generate Personal Identification NumberGENS36RPT Generate System/36 ReportGENS38RPT Generate System/38 ReportsGO Go to MenuGOTO Go ToGRTACCAUT Grant Access Code AuthorityGRTOBJAUT Grant Object AuthorityGRTUSRAUT Grant User AuthorityGRTUSRPMN Grant User PermissionHLDCMNDEV Hold Communications DeviceHLDDSTQ Hold Distribution Queue



HLDJOB Hold JobHLDJOBQ Hold Job QueueHLDOUTQ Hold Output QueueHLDPTF Hold PTFHLDRDR Hold ReaderHLDSPLF Hold Spooled FileHLDWTR Hold WriterIF IfINZDKT Initialize DisketteINZPCS Initialize PC Support/400INZPFM Initialize Physical File MemberINZSYS Initialize SystemINZTAP Initialize TapeLNKDTADFN Link Data DefinitionLODPTF Load Program Temporary FixLODQSTDB Load Question-and-Answer DatabaseMDLSYS Model SystemMGRS36ITM Migrate System/36 ItemMGRS38OBJ Migrate System/38 ObjectsMONMSG Monitor MessageMOVDOC Move DocumentMOVOBJ Move ObjectMRGDOC Merge DocumentMRGFORMD Merge Form DescriptionMRGMSGF Merge Message FileOPNDBF Open Database FileOPNQRYF Open Query FileORDSPTPTF Order Supported Product PTFsOVRDBF Override with Database FileOVRDKTF Override with Diskette FileOVRDSPF Override with Display FileOVRICFDEVE Override Intersystem Communications

Function Program Device EntryOVRICFF Override with Intersystem Communica-

tions Function FileOVRMSGF Override with Message FileOVRPRTF Override with Printer FileOVRSAVF Override Save FileOVRTAPF Override with Tape FilePAGDOC Paginate DocumentPGM ProgramPOSDBF Position Database FilePRTACTRPT Print Activity ReportPRTAFPDTA Print Advanced Function Printer DataPRTCAL Print CalendarPRTCMDUSG Print Command UsagePRTCPTRPT Print Component ReportPRTCSPAPP Print CSP/AE ApplicationPRTDEVADR Print Device AddressesPRTDOC Print Document



PRTDSKRPT Print Disk Activity ReportPRTERRLOG Print Error LogPRTINTDTA Print Internal DataPRTJOBRPT Print Job ReportPRTJOBTRC Print Job TracePRTLCKRPT Print Lock ReportPRTPOLRPT Print Pool ReportPRTRSCRPT Print Resource ReportPRTRTLTPL Print Retail TemplatePRTSAMDTA Print Sampled Address Monitor DataPRTSYSRPT Print System ReportPRTTNSRPT Print Transaction ReportPRTTRCRPT Print Trace ReportPWRDWNSYS Power Down SystemQRYCALITM Query Calendar ItemQRYDOCLIB Query Document LibraryQRYDST Query DistributionQRYTIEF Query Technical Information Exchange

FileRCLDDMCNV Reclaim Distributed Data Management

ConversationsRCLDLO Reclaim Document Library ObjectRCLRSC Reclaim ResourcesRCLSPLSTG Reclaim Spool StorageRCLSTG Reclaim StorageRCLTMPSTG Reclaim Temporary StorageRCVDST Receive DistributionRCVF Receive FileRCVJRNE Receive Journal EntryRCVMGRDTA Receive Migration DataRCVMSG Receive MessageRCVNETF Receive Network FileRCVRTLF Receive Retail FileRCVTIEF Receive Technical Information Exchange

FileRESMGRNAM Resolve Duplicate and Incorrect Office

Object NamesRETURN ReturnRGZDLO Reorganize Document Library ObjectRGZPFM Reorganize Physical File MemberRLSCMNDEV Release Communications DeviceRLSDSTQ Release Distribution QueueRLSJOB Release JobRLSJOBQ Release Job QueueRLSOUTQ Release Output QueueRLSPTF Release PTFRLSRDR Release ReaderRLSRMTPHS Release Remote PhaseRLSSPLF Release Spooled File



RLSWTR Release WriterRMVACC Remove Access CodeRMVAJE Remove Autostart Job EntryRMVALRD Remove Alert DescriptionRMVAUTLE Remove Authorization List EntryRMVBKP Remove BreakpointRMVCALITM Remove Calendar ItemRMVCFGLE Remove Configuration List EntriesRMVCMNE Remove Communications EntryRMVCNNLE Remove Connection List EntryRMVCRSDMNK Remove Cross Domain KeyRMVDIRE Remove Directory EntryRMVDLOAUT Remove Document Library Object

AuthorityRMVDSTLE Remove Distribution List EntryRMVFCTE Remove Forms Control Table EntryRMVICFDEVE Remove Intersystem Communications

Function Program Device EntryRMVJOBQE Remove Job Queue EntryRMVJRNCHG Remove Journaled ChangesRMVLIBLE Remove Library List EntryRMVM Remove MemberRMVMSG Remove MessageRMVMSGD Remove Message DescriptionRMVNETJOBE Remove Network Job EntryRMVOFCENR Remove Office EnrollmentRMVOSIABSN Remove OSI Abstract SyntaxRMVOSIADJN Remove OSI Adjacent NodeRMVOSIAGT Remove OSI AgentRMVOSIAGTR Remove OSI Agent RegistrationRMVOSIAPPE Remove OSI Application EntityRMVOSIAPPM Remove OSI Application ModeRMVOSIAPPX Remove OSI Application ContextRMVOSIAUNN Remove OSI Authority NicknameRMVOSICLPS Remove OSI Connectionless-Mode Path

SetRMVOSICMPS Remove OSI Connection-Mode Path SetRMVOSIDUAR Remove OSI Directory User Agent Regis-

trationsRMVOSIIX25 Remove OSI Inbound X.25 AttributesRMVOSILINE Remove OSI LineRMVOSILINS Remove OSI Line SetRMVOSIMGR Remove OSI ManagerRMVOSIMGRR Remove Manager RegistrationRMVOSINSAP Remove OSI NSAP AddressRMVOSIOX25 Remove OSI Outbound X.25 AttributesRMVOSIQOSM Remove OSI X.25 QOS ModeRMVOSIRTE Remove OSI RouteRMVOSISSEL Remove OSI Local Service Access Point

Selector



RMVOSISUBN Remove OSI SubnetworkRMVOSITPTM Remove OSI Transport ModeRMVPGM Remove ProgramRMVPJE Remove Prestart Job EntryRMVPTF Remove Program Temporary FixRMVREXBUF Remove REXX BufferRMVRJECMNE Remove RJE Communications EntryRMVRJERDRE Remove RJE Reader EntryRMVRJEWTRE Remove RJE Writer EntryRMVRPYLE Remove Reply List EntryRMVRTGE Remove Routing EntryRMVSCHIDXE Remove Search Index EntryRMVSOCE Remove Sphere of Control EntryRMVTCPLNK Remove TCP/IP LinkRMVTCPPORT Remove TCP/IP Port EntryRMVTCPRSI Remove TCP/IP Remote System Informa-

tionRMVTCPRTE Remove TCP/IP Route EntryRMVTRA Remove TRLAN AdapterRMVTRAINF Remove TRLAN Adapter InformationRMVTRC Remove TraceRMVWSE Remove Work Station EntryRNMCNNLE Rename Connection List EntryRNMDKT Rename DisketteRNMDLO Rename Document Library ObjectRNMM Rename MemberRNMOBJ Rename ObjectROLLBACK RollbackRPLDOC Replace DocumentRRTJOB Reroute JobRSMBKP Resume BreakpointRSMCTLRCY Resume Controller RecoveryRSMDEVRCY Resume Device RecoveryRSMLINRCY Resume Line RecoveryRSMNWIRCY Resume Network Interface RecoveryRSTAUT Restore AuthorityRSTCAL Restore CalendarRSTCFG Restore ConfigurationRSTDLO Restore Document Library ObjectRSTLIB Restore LibraryRSTLICPGM Restore Licensed ProgramRSTOBJ Restore ObjectRSTS36F Restore System/36 FileRSTS36FLR Restore System/36 FolderRSTS36LIBM Restore System/36 Library MembersRSTS38AUT Restore System/38 AuthorityRSTUSRPRF Restore User ProfilesRTVAUTLE Retrieve Authorization List EntryRTVCFGSRC Retrieve Configuration Source



RTVCFGSTS Retrieve Configuration StatusRTVCLDSRC Retrieve C Locale Description SourceRTVCLNUP Retrieve CleanupRTVCLSRC Retrieve CL SourceRTVDOC Retrieve DocumentRTVDTAARA Retrieve Data AreaRTVGRPA Retrieve Group AttributesRTVJOBA Retrieve Job AttributesRTVJRNE Retrieve Journal EntryRTVLIBD Retrieve Library DescriptionRTVMBRD Retrieve Member DescriptionRTVMSG Retrieve MessageRTVNETA Retrieve Network AttributesRTVOBJD Retrieve Object DescriptionRTVPDGPRF Retrieve Print Descriptor Group ProfileRTVPWRSCDE Retrieve Power On/Off Schedule EntryRTVQMFORM Retrieve Query Management FormRTVQMQRY Retrieve Query Management QueryRTVSYSVAL Retrieve System ValueRTVUSRPRF Retrieve User ProfileRUNQRY Run QueryRVKACCAUT Revoke Access Code AuthorityRVKOBJAUT Revoke Object AuthorityRVKUSRPMN Revoke User PermissionSAVCAL Save CalendarSAVCHGOBJ Save Changed ObjectSAVDLO Save Document Library ObjectSAVLIB Save LibrarySAVLICPGM Save Licensed ProgramSAVOBJ Save ObjectSAVSAVFDTA Save Save File DataSAVSECDTA Save Security DataSAVSTG Save StorageSAVSYS Save SystemSAVS36F Save System/36 FileSAVS36LIBM Save System/36 Library MembersSBMDBJOB Submit Database JobsSBMDKTJOB Submit Diskette JobsSBMFNCJOB Submit Finance JobSBMJOB Submit JobSBMNETJOB Submit Network JobSBMRJEJOB Submit RJE JobSBMRMTCMD Submit Remote CommandSBMRTLPGM Submit Retail ProgramSETATNPGM Set Attention ProgramSETKBDMAP Set Keyboard MapSETMSTK Set Master KeySETOSIATR Set OSI AttributesSETPGMINF Set Program InformationSIGNOFF Sign Off



SLTCMD Select CommandSNDBRKMSG Send Break MessageSNDDOC Send DocumentSNDDST Send DistributionSNDDSTQ Send Distribution QueueSNDEMLIGC Send DBCS 3270PC Emulation CodeSNDF Send FileSNDFNCIMG Send Finance Diskette ImageSNDJRNE Send Journal EntrySNDMGRDTA Send Migration DataSNDMSG Send MessageSNDNETF Send Network FileSNDNETMSG Send Network MessageSNDNETSPLF Send Network Spooled FileSNDPGMMSG Send Program MessageSNDPTFORD Send Program Temporary Fix OrderSNDRCVF Send/Receive FileSNDRPY Send ReplySNDRTLF Send Retail FileSNDRTLRCD Send Retail RecordSNDSRVRQS Send Service RequestSNDTIEF Send Technical Information Exchange FileSNDUSRMSG Send User MessageSTRAPF Start Advanced Printer FunctionSTRAPW Start Advanced Print WriterSTRBAS Start BasicSTRBASPRC Start Basic ProcedureSTRBGU Start Business Graphics UtilitySTRCBLDBG Start COBOL DebugSTRCGU Start CGUSTRCLNUP Start CleanupSTRCMTCTL Start Commitment ControlSTRCPYSCN Start Copy ScreenSTRCSP Start CSP/AE UtilitiesSTRDBG Start DebugSTRDBRDR Start Database ReaderSTRDFU Start DFUSTRDKTRDR Start Diskette ReaderSTRDKTWTR Start Diskette WriterSTRDSKCOL Start Disk Data CollectionSTREDU Start EducationSTREML3270 Start 3270 Display EmulationSTREPMENV Start EPM EnvironmentSTRFMA Start Font Management AidSTRIDD Start Interactive Data Definition UtilitySTRIDXSCH Start Index SearchSTRITF Start Interactive Terminal FacilitySTRJOBTRC Start Job TraceSTRJRNAP Start Journal Access Path



STRJRNPF Start Journal Physical FileSTRKPF Start Kanji Printer FunctionSTRMOD Start ModeSTROFC Start OfficeSTROSINL Start OSI Network ResourceSTRPASTHR Start Pass-ThroughSTRPCCMD Start PC CommandSTRPCO Start PC Support OrganizerSTRPDM Start Programming Development ManagerSTRPFRG Start Performance GraphicsSTRPFRMON Start Performance MonitorSTRPFRT Start Performance ToolsSTRPGMMNU Start Programmer MenuSTRPJ Start Prestart JobsSTRPPW Start Page Printer WriterSTRPRTEML Start Printer EmulationSTRPRTWTR Start Printer WriterSTRQMPRC Start Query Management ProcedureSTRQMQRY Start Query Management QuerySTRQRY Start QuerySTRQST Start Question and AnswerSTRREXPRC Start REXX ProcedureSTRRJECSL Start RJE ConsoleSTRRJERDR Start RJE ReaderSTRRJESSN Start RJE SessionSTRRJEWTR Start RJE WriterSTRRLU Start Report Layout UtilitySTRRMTSPT Start Remote SupportSTRSAM Start Sampled Address MonitorSTRSAMCOL Start Sampled Address Monitor Data Col-

lectionSTRSBS Start SubsystemSTRSCHIDX Start Search IndexSTRSDA Start SDASTRSEU Start SEUSTRSPTN Start Support NetworkSTRSQL Start Structured Query LanguageSTRSRVJOB Start Service JobSTRSST Start System Service ToolsSTRS36 Start System/36STRS36MGR Start System/36 MigrationSTRS36PRC Start System/36 ProcedureSTRS38MGR Start System/38 MigrationSTRTCPFTP Start TCP/IP File Transfer ProtocolSTRTCPLNK Start TCP/IP LinkSTRTCPTELN Start TCP/IP TELNETSTRTIESSN Start Technical Information Exchange

SessionSTRWP Start Word ProcessingTFRBCHJOB Transfer Batch Job



TFRCTL Transfer ControlTFRGRPJOB Transfer to Group JobTFRJOB Transfer JobTFRPASTHR Transfer Pass-ThroughTFRSECJOB Transfer Secondary JobTRCCSP Trace CSP/AE ApplicationTRCICF Trace ICFTRCINT Trace InternalTRCJOB Trace JobTRCOSIASN Trace OSI AssociationsTRCOSIPCL Trace OSI ProtocolsTRCREX Trace REXXTRNPIN Translate Personal Identification NumberUPDDTA Update DataVFYCMN Verify CommunicationsVFYLNKLPDA Verify Link supporting LPDA-2VFYMSTK Verify Master KeyVFYPIN Verify Personal Identification NumberVFYPRT Verify PrinterVFYTAP Verify TapeVFYTCPCNN Verify TCP/IP ConnectionVRYCFG Vary ConfigurationWAIT WaitWRKACTJOB Work with Active JobsWRKALR Work with AlertsWRKALRD Work with Alert DescriptionsWRKALRTBL Work with Alert TablesWRKAUTL Work with Authorization ListsWRKCFGL Work with Configuration ListsWRKCFGSTS Work with Configuration StatusWRKCHTFMT Work with Chart FormatsWRKCLS Work with ClassesWRKCMD Work with CommandsWRKCNNL Work with Connection ListsWRKCNNLE Work with Connection List EntriesWRKCNTINF Work with Contact InformationWRKCOSD Work with Class-of-Service DescriptionsWRKCSI Work with Communications Side Informa-

tionWRKCTLD Work with Controller DescriptionsWRKDBFIDD Work with DB Files Using IDDUWRKDDMF Work with Distributed Data Management

FilesWRKDEVD Work with Device DescriptionsWRKDEVTBL Work with Device TablesWRKDIR Work with DirectoryWRKDOC Work with DocumentsWRKDOCLIB Work with Document LibrariesWRKDOCPRTQ Work with Document Print Queue



WRKDPCQ Work with DSNX/PC Distribution QueuesWRKDSKSTS Work with Disk StatusWRKDSTL Work with Distribution ListsWRKDSTQ Work with Distribution QueueWRKDTAARA Work with Data AreasWRKDTADCT Work with Data DictionariesWRKDTADFN Work with Data DefinitionsWRKDTAQ Work with Data QueuesWRKEDTD Work with Edit DescriptionsWRKF Work with FilesWRKFCNARA Work with Functional AreasWRKFCT Work with Forms Control TableWRKFLR Work with FoldersWRKFNTRSC Work with Font ResourcesWRKFORMDF Work with Form DefinitionsWRKGSS Work with Graphics Symbol SetsWRKHDWPRD Work with Hardware ProductsWRKHDWRSC Work with Hardware ResourcesWRKJOB Work with JobWRKJOBD Work with Job DescriptionsWRKJOBQ Work with Job QueueWRKJRN Work with JournalWRKJRNA Work with Journal AttributesWRKJRNRCV Work with Journal ReceiversWRKLIB Work with LibrariesWRKLIBPDM Work with Libraries Using PDMWRKLIND Work with Line DescriptionsWRKMBRPDM Work with Members Using PDMWRKMNU Work with MenusWRKMODD Work with Mode DescriptionsWRKMSG Work with MessagesWRKMSGD Work with Message DescriptionsWRKMSGF Work with Message FilesWRKMSGQ Work with Message QueuesWRKNAMSMTP Work with Names for SMTPWRKNETF Work with Network FilesWRKNETJOBE Work with Network Job EntriesWRKNWID Work with Network Interface Description

CommandWRKOBJ Work with ObjectsWRKOBJCSP Work with Objects for CSP/AEWRKOBJLCK Work with Object LocksWRKOBJOWN Work with Objects by OwnerWRKOBJPDM Work with Objects Using PDMWRKORDINF Work with Order InformationWRKOSIABSN Work with OSI Abstract SyntaxesWRKOSIADJN Work with OSI Adjacent NodesWRKOSIAGTR Work with OSI Agent RegistrationsWRKOSIAPPE Work with OSI Application EntitiesWRKOSIAPPM Work with OSI Application Modes



WRKOSIAPPX Work with OSI Application ContextWRKOSIAUNN Work with OSI Authority NicknamesWRKOSICLPS Work with OSI Connectionless-Mode Path

SetsWRKOSICMPS Work with OSI Connection-Mode Path

SetsWRKOSIDUAR Work with OSI Directory User Agent Reg-

istrationsWRKOSIIX25 Work with OSI Inbound X.25 AttributesWRKOSILINE Work with OSI LinesWRKOSILINS Work with OSI Line SetsWRKOSIMGRR Work with OSI Manager RegistrationWRKOSINSAP Work with OSI NSAP AddressesWRKOSIOX25 Work with OSI Outbound X.25 AttributesWRKOSIQOSM Work with OSI X.25 QOS ModesWRKOSIRTE Work with OSI RoutesWRKOSISSEL Work with OSI Local Service Access Point

SelectorsWRKOSISUBN Work with OSI SubnetworksWRKOSITPTM Work with OSI Transport ModesWRKOUTQ Work with Output QueueWRKOUTQD Work with Output Queue DescriptionWRKOVL Work with OverlaysWRKPAGDFN Work with Page DefinitionsWRKPAGSEG Work with Page SegmentsWRKPFRCOL Work with Performance CollectionWRKPGM Work with ProgramsWRKPGMTBL Work with Program TablesWRKPNLGRP Work with Panel GroupsWRKPRB Work with ProblemWRKPRDINF Work with Product InformationWRKPRTSTS Work with Printing StatusWRKQMFORM Work with Query Management FormWRKQMQRY Work with Query Management QueryWRKQRY Work with QueryWRKQST Work with QuestionsWRKRDR Work with ReadersWRKRJESSN Work with RJE SessionWRKRPYLE Work with System Reply List EntriesWRKRTLCMN Work with Retail CommunicationsWRKRTLCVN Work with Retail ConversionsWRKRTLTPL Work with Retail TemplatesWRKSBMJOB Work with Submitted JobsWRKSBS Work with SubsystemsWRKSBSD Work with Subsystem DescriptionsWRKSBSJOB Work with Subsystem JobsWRKSCHIDX Work with Search IndexesWRKSCHIDXE Work with Search Index EntriesWRKSHRPOOL Work with Shared Storage Pools



WRKSOC Work with Sphere of ControlWRKSPADCT Work with Spelling Aid DictionariesWRKSPLF Work with Spooled FilesWRKSPLFA Work with Spooled File AttributesWRKSPTPRD Work with Supported ProductsWRKSRVPVD Work with Service ProvidersWRKSRVRQS Work with Service RequestersWRKSSND Work with Session DescriptionWRKSYSACT Work with System ActivityWRKSYSSTS Work with System StatusWRKSYSVAL Work with System ValuesWRKTBL Work with TablesWRKTCPSTS Work with TCP/IP Network StatusWRKTIE Work with Technical Information

ExchangeWRKTRA Work with TRLAN AdaptersWRKTXTPRF Work with Text ProfilesWRKUSRJOB Work with User JobsWRKUSRPRF Work with User ProfilesWRKUSRTBL Work with User TablesWRKWTR Work with Writers


IBM

Program Number: 5763-SS1

Printed in U.S.A.

SX41-3732-ðð