2
ARRMET SRL // Via Alessandro Volta, 8 // 33044 Manzano (UD) - ITALY // Phone +39 0432 937065 Fax +39 0432 740102 VAT: IT 00452180300 ARRMET SRL UNI EN ISO 9001 CERTIFIED QUALITY MANAGEMENT SYSTEM POCKET PLASTIC DESIGN: ROBBY CANTARUTTI & FRANCESCA PETRICICH 509 Description: folding chair with chromed or painted steel frame and polypropylene seat and back. Use: indoor 5,25 1 0,06 x4 0,03 x2 23 x4 11,5 x2 4 2 78 46 45 47 END USE Chair for home and contract suitable to furnish: home, boardroom, break-out area, library, restaurant, bar and conference room. COMPONENTS The frame is composed of two parts combined together by a hinge expressly designed for this chair. The two parts are composed of metal tubes, rectangular-section and round metal rods, welded. It can be powder coated with polyester varnish of the following colours: colours: black (M7), white (M6), flame red (M10) and aluminium satinated (AL2); aluminium embossed (AL1) (epoxypolyester paint) or chromium plated (CRO). The hinge that connects together the two parts is made of nylon (PA) and it’s available in the same colour of frame (grey, black and white) (except for the chromed version, black finishing). Seat and back are made of polypropylene (PP), injection-moulded, available with the following colours: white (PP1), pearl grey (PP2), black (PP3), brown (PP4), anthracite (PP5), orange (PP7), red (PP6), light green (PP8) and blue (PP9). The nylon (PA) gliders are exclusively designed and produced for Pocket chair, allowing stability and avoiding damages on floors where chairs are placed. Available fixed cushion (art.887) for seat, padded with CFC-free polyurethane foam and upholstered with fabrics chosen by the customers. Used fabric 18 cm. There are three Trolleys for transportation: 6 chairs Pocket trolley (art.651) chromium plated, 10 chairs Pocket “Isola” trolley (art.833) aluminium embossed and 45 chairs Pocket trolley pro (art.597) matt black (M7). Wall hook (art.551) up to 4 Pocket chairs and 2 chairs Coupling hook (art.912), exclusively designed and produced for Pocket chair, in polypropilene (PP), black coloured, injection-moulded, for conference room is available for this model. Packaging is made of a cardboard box and polyethylene sheets, and it contains 4 folded chairs. Available 2 chairs box on request. CERTIFICATIONS This article stood tests provided for by standards: - EN 1728:2012 seat and back fatigue test, according to table 1 of EN 16139:2013, level L2 - extreme - EN 12520:2010 general safety CERTIFICATIONS - EN 12520:2010 information for use - EN 1728:2000 seat and back static load test according to table 1 of EN 12520:2010 - EN 1728:2000 seat front edge durability test according to table 1 of EN 12520:2010 - EN 1728:2000 leg forward static load test according to table 1 of EN 12520:2010 - EN 1728:2000 leg sideways static load test according to table 1 of EN 12520:2010 - EN 1728:2000 seat impact test according to table 1 of EN 12520:2010 - EN 12520:2010 backwards fall test - EN 1022:2005 stability REACH: is the European Union regulation that addresses the production and use of chemical substances. This product contains only substances compliant with the abovementioned regulation and does not contain any “substance of very high concern” (SVHC). ORDINARY CLEANING AND MAINTENANCE Any spills should be wiped up immediately with a clean, dry rag. Use neutral detergents only. Avoid cleaning with abrasive sponges. EXTRAORDINARY MAINTENANCE Supplier suggested personnel only. PRECAUTIONS FOR USE The chair must be used with its four legs resting on the floor at all times. Do not sit on the back. Do not stand on the chair. Check periodically that the screws are correctly tightened. Be careful not to sit off the seating centre. Please keep away from any heating source. We advise not to use this product when exceeding 100 Kg load limit. The product could change the colour and shade, if exposed to direct sunlight. In case of children use, please consider the supervision of an adult. Arrmet srl is not liable for any damage that may result from the product misuse. ECOLOGY Harmful substances This product is not toxic nor hazardous to human health, animals or environment. Waste disposal Dispose this product responsibly after use at the end of its life. Please utilise the waste collection and recycling service operated by your local authority, or take it to a suitable recycling point. This products can be easily disassembled, facilitating disposal. WARRANTY 24 + 2 months as referred to in 99/44/CE European directive. This product datasheet comply with Italian regulation (D.Lgs 6th September 2005, n. 206 “Codice del Consumo”), on the subject of consumer information and implementation tool.

ARRMET SL Uni En iso CeRtiFieD QuaLity ManaGeMent systeM · ARRMET SRL flfl Via alessandro Volta, 8 // 33044 Manzano (uD) - itaLy // Phone +39 0432 937065 Fax +39 0432 740102 Vat:

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ARRMET SL Uni En iso CeRtiFieD QuaLity ManaGeMent systeM · ARRMET SRL flfl Via alessandro Volta, 8 // 33044 Manzano (uD) - itaLy // Phone +39 0432 937065 Fax +39 0432 740102 Vat:

Arrmet srl // Via Alessandro Volta, 8 // 33044 Manzano (UD) - ITALY // Phone +39 0432 937065 Fax +39 0432 740102 VAT: IT 00452180300

Arrmet srlUNI EN ISO 9001 CERTIFIED QUALITY MANAGEMENT SYSTEM

POCKET PLASTIC dESIgn: Robby CantaRutti & FRanCesCa PetRiCiCh 509

Description: folding chair with chromed or painted steel frame and polypropylene seat and back.

Use: indoor

5,25 10,06 x4

0,03 x2

23 x4

11,5x2

42

78 46 45 47

EnD UsE Chair for home and contract suitable to furnish: home, boardroom, break-out area, library, restaurant, bar and conference room.

ComponEnts

the frame is composed of two parts combined together by a hinge expressly designed for this chair. the two parts are composed of metal tubes, rectangular-section and round metal rods, welded. it can be powder coated with polyester varnish of the following colours: colours: black (M7), white (M6), flame red (M10) and aluminium satinated (aL2); aluminium embossed (aL1) (epoxypolyester paint) or chromium plated (CRo).

the hinge that connects together the two parts is made of nylon (Pa) and it’s available in the same colour of frame (grey, black and white) (except for the chromed version, black finishing).

seat and back are made of polypropylene (PP), injection-moulded, available with the following colours: white (PP1), pearl grey (PP2), black (PP3), brown (PP4), anthracite (PP5), orange (PP7), red (PP6), light green (PP8) and blue (PP9).

the nylon (Pa) gliders are exclusively designed and produced for Pocket chair, allowing stability and avoiding damages on floors where chairs are placed.

available fixed cushion (art.887) for seat, padded with CFC-free polyurethane foam and upholstered with fabrics chosen by the customers. used fabric 18 cm.

there are three trolleys for transportation: 6 chairs Pocket trolley (art.651) chromium plated, 10 chairs Pocket “isola” trolley (art.833) aluminium embossed and 45 chairs Pocket trolley pro (art.597) matt black (M7).

Wall hook (art.551) up to 4 Pocket chairs and 2 chairs

Coupling hook (art.912), exclusively designed and produced for Pocket chair, in polypropilene (PP), black coloured, injection-moulded, for conference room is available for this model.

packaging is made of a cardboard box and polyethylene sheets, and it contains 4 folded chairs. available 2 chairs box on request.

CErtifiCations

this article stood tests provided for by standards:- en 1728:2012 seat and back fatigue test, according to table 1 of en 16139:2013, level L2 - extreme- en 12520:2010 general safety CeRtiFiCations- en 12520:2010 information for use- en 1728:2000 seat and back static load test according to table 1 of en 12520:2010- en 1728:2000 seat front edge durability test according to table 1 of en 12520:2010- en 1728:2000 leg forward static load test according to table 1 of en 12520:2010- en 1728:2000 leg sideways static load test according to table 1 of en 12520:2010- en 1728:2000 seat impact test according to table 1 of en 12520:2010- en 12520:2010 backwards fall test- en 1022:2005 stability

rEaCH: is the european union regulation that addresses the production and use of chemical substances. this product contains only substances compliant with the abovementioned regulation and does not contain any “substance of very high concern” (sVhC).

orDinary ClEaning anD maintEnanCE

any spills should be wiped up immediately with a clean, dry rag.use neutral detergents only.avoid cleaning with abrasive sponges.

ExtraorDinary maintEnanCE supplier suggested personnel only.

prECaUtions for UsE

the chair must be used with its four legs resting on the floor at all times.Do not sit on the back. Do not stand on the chair.Check periodically that the screws are correctly tightened. be careful not to sit off the seating centre.Please keep away from any heating source. We advise not to use this product when exceeding 100 Kg load limit.the product could change the colour and shade, if exposed to direct sunlight. in case of children use, please consider the supervision of an adult.arrmet srl is not liable for any damage that may result from the product misuse.

ECology

Harmful substancesthis product is not toxic nor hazardous to human health, animals or environment.Waste disposalDispose this product responsibly after use at the end of its life.Please utilise the waste collection and recycling service operated by your local authority, or take it to a suitable recycling point.this products can be easily disassembled, facilitating disposal.

Warranty 24 + 2 months as referred to in 99/44/Ce european directive.

this product datasheet comply with italian regulation (D.Lgs 6th september 2005, n. 206 “Codice del Consumo”), on the subject of consumer information and implementation tool.

Page 2: ARRMET SL Uni En iso CeRtiFieD QuaLity ManaGeMent systeM · ARRMET SRL flfl Via alessandro Volta, 8 // 33044 Manzano (uD) - itaLy // Phone +39 0432 937065 Fax +39 0432 740102 Vat:

ARRMET srl // Via Alessandro Volta, 8 // 33044 Manzano (UD) - ITALY // Phone +39 0432 937065 Fax +39 0432 740102 VAT: IT 00452180300

ARRMET SRLUNI EN ISO 9001 CERTIFIED QUALITY MANAGEMENT SYSTEM

VOLUME (m3)

VOLUME

PESO NETTO (kg)

NET WEIGHT

PESO COLLO (kg)

BOX WEIGHT

NUMERO COLLI

BOXES NUMBER

PEZZI PER COLLO

PIECES PER BOX

IMPILABILITÀ (max)

STACKABILITY

ADATTO PER ESTERNO

SUITABLE FOR OUTDOOR

CONSUMO TESSUTO (cm/pz H140)

NEEDED FABRIC (cm/pc H140)

CONSUMO PELLE (m2)

NEEDED LEATHER

NON IMPILABILE

NOT STACKABLE

NON ADATTO PER ESTERNO

NOT SUITABLE FOR OUTDOOR

A = ASSEMBLATO / ASSEMBLED

D = DISASSEMBLATO / DISASSEMBLED

= CONSUMO OTTIMIZZATO PER 2 PEZZI E MULTIPLI / USE OPTIMIZED FOR 2 PIECES AND MULTIPLE

ALTEZZA (cm)

HEIGHT

SEDUTA (cm)

SEAT

LARGHEZZA (cm)

WIDTH

PROFONDITÀ (cm)

DEPTH

ALTEZZA TAVOLO (cm)

TABLE HEIGHT

LARGHEZZA (cm)

WIDTH

PROFONDITÀ (cm)

DEPTH

DIAMETRO (cm)

DIAMETER

BRACCIOLO (cm)

ARMREST

→ VI INVITIAMO A LEGGERE LE NOTE, CONTENGONO INFORMAZIONI IMPORTANTI

→ PLEASE READ CAREFULLY THE NOTES, WHICH CONTAIN IMPORTANT INFORMATION