8/11/2019 Ardrox 6376-(Technical Information).
1/2
Ardrox
6376Multi -Metal Alkaline Cleaner
PRIMARY APPLICATION
Ardrox6376 is a liquid non-phosphate multi-metal cleaner for
tank immersion application. A blend ofalkaline salts and wetting
agents, it is inhibited to safely remove oils, greases, and other
productionsoils from aluminum, copper, magnesium and titanium.
Ardrox 6376 can also be used to clean ferrousmetals and is
free-rinsing.
CHEMICAL CHARACTERISTICS
composition ............................... silicates,
inhibitorsappearance................................ clear, amber
liquid
flash point .................................. noneodor
........................................... mild surfactantbulk
density................................ 8.70 lbs./galpH
.............................................. 12.0
APPROVALS
Pratt & Whitney SPMC 207, General Electric C04-267 &
Rolls Royce OMat 1/24D.
APPLICATION PROCEDURE
In Immersion Tanks
Ardrox 6376 is mixed with water at a concentration range of 20
to 30 gallons for each 100 gallons of
working solution, and then heated from 140 to 180F. In a typical
cleaning operation, parts areimmersed for 15 to 30 minutes and
rinsed in overflowing water for 30 to 60 seconds. Agitationenhances
and speeds up cleaning.
NOTE: The above is based upon standard industrial use. Some
production operations may requireother operating instructions. The
Chemetall Oakite representative will recommend the bestway to use
this product based upon production requirements.
SAFETY AND HANDLING
Prior to handling and use of any of the materials referenced in
this document, the Material Safety Data
Sheets should be read and understood by all personnel in contact
with these materials.
8/11/2019 Ardrox 6376-(Technical Information).
2/2
KEEP OUT OF REACH OF CHILDREN
STORAGE
Dry indoor storage at temperatures between 40F and 100F is
recommended, away from any
incompatible materials referenced in the Material Safety Data
Sheets. All containers should be tightlyclosed when not in use.
SHELF LIFE
The shelf life is 2 years.
DISPOSAL
Any disposal of the materials referenced in this document should
be in accordance with all applicablefederal, state, and local
regulations. The process solution can contain components other than
thosepresent in the materials as supplied. Analysis of process
solutions may be required prior to disposal.
F17201- 06/2004
Printed in the USA
Corporate Headquarters and Eastern Branch (800) 526-4473 Central
Branch (Midwest) (877) 941-3800
Western Branch (800) 331-1197 Oakite Canada Limited (800)
668-4318 Chemetall Mexicana 011 52 55 5656 1490
Website: www.oakite.com E-mail: [email protected]
Shop online at www.oakitestore.com
Oakite Products, Inc. warrants that the product or products
described herein will conform with its published specifications.
The products supplied by Oakite and information related
to them are i ntended for use by buyers having necessary
industrial skill and knowledge. Buyers should undertake sufficient
verification and testing t o determine the suitability of the
Oakite materials for their own particular purpose. Since buyers
conditions of use of products are beyond Oakites control, Oakite
does not warrant any recommendations and
information for the use of such products . OAKITE DISCLAIMS ALL
OTHER WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY
AND
FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE USE OF
ITS PRODUCTS.
Contact David Eldredge Chemical Representative. +1 435-654-2447
ww.naltic.com/products.html
