ME 2305 Applied Hydraulics and Pneumatics

Notes on Lesson

Class : III Year Mechanical Engg., A & B Section, 2009 Batch.

*

IndexClass Test Plan-Slide 3Self Study Topics-Slide 4Class Seminar Topics-Slide 5Weekly Assignments-Slide 6 8Open Book Test-Slide 9Notes on Lesson-Slide 10 to 84 Lecturer Hour ActivitiesTutorial Hours DetailsDoubt Clarification Session- Slide 85 to 87Recap Session Details Slide 88 to 91*

Class Test Plan*

Self Study Topic

*

S.No.UnitSelf Study Topic1.ILosses in pipes, Valves and Fittings2.IIRotary Actuators3.IIIRelays & Solenoids4.IVProperties of Air5.VFailures and Trouble Shooting

Class Seminar Topics*

Guidelines for Writing Weekly Assignments

Assignments should be submitted on or before the last date before 10.00 A.M.Assignments should be written only in the college assignment notebooks.Assignments should be written using blue or black pen.Assignments should be neat and legible.Viva questions will be asked during the submission time. If not answered then that assignment should be repeated again.Doubts related to the assignments can be cleared at any time.Assignments should be collected back on the next day of submission.Assignments carries 20 % of internal marks*

Weekly Assignment Plan*Cont

Ass. No.Date Of Assign.AssignmentLast Date of Submission130-Jun-11Advantage and Application of Fluid Power Systems4-Jul-1127-Jul-11Various Fluid Power Symbols (Min of 30 Symbols)11-Jul-11314-Jul-11Any 3 Application of Pascal's Law - Explain18-Jul-11421-Jul-11Explain the basis of Hydraulics25-Jul-11528-Jul-11Explain the various losses in pipes, valves and fittings.1-Aug-1164-Aug-11Draw the Diagram of Gear, Vane and Piston Pump8-Aug-11711-Aug-11Differentiate Gear, Vane and Piston Pump15-Aug-11818-Aug-11Explain Cylinder Cushioning22-Aug-11925-Aug-11Draw the DCV, PCV, FCV (Min. of 12 dig.)29-Aug-11101-Sep-11Explain any 3 application of Hydraulic circuits5-Sep-11

*

118-Sep-11Explain Intensifier Circuit12-Sep-111215-Sep-11Explain FRL19-Sep-111322-Sep-11Explain Air control valves26-Sep-111429-Sep-11Explain Sequence and Synchronize circuit3-Oct-11156-Oct-11Draw A+B+C+D+D-C-B-A-10-Oct-111613-Oct-11Draw A+A-B+B-C+C-D+C-17-Oct-111720-Oct-11Explain Fluidics Logic Gates24-Oct-111827-Oct-11Explain ladder Diagram31-Oct-1119.03-Nov-11Explain Low Cost Automation07-Nov-11

Ass. No.Date Of Assign.AssignmentLast Date of Submission

Open Book Test Plan*

S.No.Unit testOnly Diagrams and circuits1.IApplication of Pascal's law2.IIPump and valve diagrams3.IIIHydraulics Circuits4.IVCascade and pneumo Circuits5.VHydride Circuits

Class : 1 Date : 18.06.2011Unit : IPeriod : 3LH / TH : LHTopic : Introduction to subject & syllabus reviewIntroduction about the subject.Objective of the SubjectNeed of the hydraulics and pneumatics Industrial applicationsAdvanced technologies.Scope for the project work.Brief explanation on unit I, II, III, IV, V.

*

Class : 2Date : 20.06.2011Unit : IPeriod : 3LH / TH : LHTopic : Introduction to fluid powerExplanation about Fluid.Explanation about Fluid power.Application of fluid power.Advantage and disadvantage of fluid power.*

Class : 3Date : 20.06.2011Unit : IPeriod : 4LH / TH : LHTopic : Advantages of fluid powerDetailed discussion on the advantages of the fluid power system.

*

Class : 4Date : 23.06.2011Unit : IPeriod : 7LH / TH : LHTopic : Application of fluid power systemVarious applications of the fluid power systems.Merits and demerits of those systems.Simple circuit of those systems.*

Class : 5Date : 25.06.2011Unit : IPeriod : 3LH / TH : LHTopic : Types of fluid power systemsClassification of fluid power systemBrief description of fluid power systemMerits and demerits of the fluid power system*

Class : 6Date : 27.06.2011Unit : IPeriod : 3LH / TH : LHTopic : Properties of hydraulic fluids, General types of fluidsFluid and its classificationProperties of the fluids.Advantage of the fluid propertiesProperties of the hydraulic fluids.Application of fluids and the hydraulic fluids.*

Class : 7Date : 27.06.2011Unit : IPeriod : 4LH / TH : THTopic : Fluid power symbols

Various fluid power system symbols and explanation.How to differentiate the various fluid power symbols.Practices to draw the various fluid power symbols.*

Class : 8Date : 30.06.2011Unit : IPeriod : 7LH / TH : LHTopic : Basics of hydraulicsBasic hydraulic circuit.Basic essential components.Functions of the hydraulic components.Working of the hydraulic components and circuits.*

Class : 9Date : 02.07.2011Unit : IPeriod : 3LH / TH : THTopic : Basics of hydraulics, Applications of Pascals lawBasics of the Hydraulics.Pascal lawVarious applications of the Pascals law.Student Seminars.*

Class : 10Date : 04.07.2011Unit : IPeriod : 3 LH / TH : LHTopic : Laminar and turbulent flow, Reynoldss number, Darcys equationExplanation on laminar and turbulent flow with application and examples.Difference between Laminar and Turbulent Flow.Reynolds Number Experimental setup, derivation and application.Darcy's Equation derivation, equation and its application.

*

Class : 11Date : 04.07.2011Unit : IPeriod : 4LH / TH : THTopic : Laminar and turbulent flow, Reynoldss number, Darcys equationApplication, Problems and applications with real time examples*

Class : 12Date : 07.07.2011Unit : IPeriod : 7LH / TH : LHTopic : Losses In Pipe, Valves And FittingsVarious connecting devices in the Hydraulic Circuits.Efficiency of the system.Effects of leakage and losses of oil.Effect due to losses in pipes.Effects due losses in Valves.Effects due to losses in Fittings.*

Class : 13Date : 09.07.2011Unit : IIPeriod : 3LH / TH : LHTopic : Pumping Theory, Pump ClassificationSimple laws on pressure and volume.Basics of Pumping Theory.Working Procedure of the Rotary and reciprocating pumps.Various types of pumps and descriptions.*

Class : 14Date : 11.07.2011Unit : IPeriod : 3LH / TH : -Topic : Class Test I : Unit I topicsBasic Hydraulic circuit and its component explanations.Various losses in Hydraulic circuits.Brief Explanation on laminar, turbulent, Reynolds number, and Darcy equation.Properties and application of Fluid Power system.Applications of Pascal's law*

Class : 15Date : 11.07.2011Unit : IPeriod : 4LH / TH : Topic : Class Test I : Unit I topics*Basic Hydraulic circuit and its component explanations.Various losses in Hydraulic circuits.Brief Explanation on laminar, turbulent, Reynolds number, and Darcy equation.Properties and application of Fluid Power system.Applications of Pascal's law

Class : 16Date : 14.07.2011Unit : IIPeriod : 7LH / TH : LHTopic : Gear pump construction and working of pumps pump performanceBasics and working principle of the Gear pump.Derivation for efficiency calculation of the gear pump.Merits and demerits of the gear pump.Various types of the Gear pump.Application of the gear pump.*

Class : 17Date : 16.07.2011Unit : IIPeriod : 3LH / TH : THTopic : Gear pump construction and working of pumps pump performanceBrief Explanation on the various types of the gear pumps and its operating principle.Efficiency calculation of the various gear pumps.Merits and demerits of the various types of the gear pumps.

*

Class : 18Date : 18.07.2011Unit : IIPeriod : 3LH / TH : LHTopic : Vane pump construction and working of pumps pump performanceBasics and working principle of the Vane pump.Derivation for efficiency calculation of the Vane pump.Merits and demerits of the Vane pump.Various types of the Vane pump.Application of the Vane pump.

*

Class : 19Date : 18.07.2011Unit : IIPeriod : 4LH / TH : THTopic : Vane pump construction and working of pumps pump performanceBrief Explanation on the various types of the vane pumps and its operating principle.Efficiency calculation of the various vane pumps.Merits and demerits of the various types of the vane pumps.

*

Class : 20Date : 21.07.2011Unit : IIPeriod : 7LH / TH : LHTopic : Piston pump construction and working of pumps pump performanceBasics and working principle of the Piston pump.Derivation for efficiency calculation of the Piston pump.Merits and demerits of the Piston pump.Various types of the Piston pump.Application of the Piston pump.

*

Class : 21Date : 23.07.2011Unit : IIPeriod : 3LH / TH : THTopic : Piston pump construction and working of pumps pump performanceBrief Explanation on the various types of the Piston pumps and its operating principle.Efficiency calculation of the various Piston pumps.Merits and demerits of the various types of the Piston pumps.

*

Class : 22Date : 25.07.2011Unit : IIPeriod : 3LH / TH : LHTopic : Variable displacement pumpsBasics and working principle of the Variable displacement pump.Derivation for efficiency calculation of the Variable displacement .Merits and demerits of the Variable displacement Various types of the Variable displacement .Application of the Variable displacement *

Class : 23Date : 25.07.2011Unit : IIPeriod : 4LH / TH : LHTopic : Linear hydraulic actuatorsBasics and working principle of the hydraulic actuators.Derivation for efficiency calculation of the hydraulic actuators.Merits and demerits of the hydraulic actuatorsVarious types of the hydraulic actuators.Application of the hydraulic actuators*

Class : 24Date : 28.07.2011Unit : IIPeriod : 7LH / TH : LHTopic : Types of hydraulic cylinders, Single acting, double actingVarious Types of Hydraulic Cylinders.Working principle and the applications.Single Acting Cylinder and its performance measurements.Double acting Cylinder and its performance measurements.*

Class : 25Date : 30.07.2011Unit : IIPeriod : 3LH / TH : LHTopic : Special cylinders like tandem, rod less, telescopic, cushioning mechanismVarious types of special cylinders and its applications.Tandem cylinder.Rod less Cylinder.Telescopic cylinder.Cylinder Cushioning.

*

Class : 26Date : 01.11.2011Unit : IIPeriod : 3LH / TH : LHTopic : Class Test II : PumpAny Three QuestionsExternal Gear Pump.Balanced vane Pump.Radial Piston Pump.Cylinder Cushioning.*

Class : 27Date : 01.11.2011Unit : IIPeriod : 4LH / TH : LHTopic : Class Test II : Pump*Any Three QuestionsExternal Gear Pump.Balanced vane Pump.Radial Piston Pump.Cylinder Cushioning.

Class : 28Date : 04.11.2011Unit : IIPeriod : 7LH / TH : LHTopic : Rotary actuators :gear, vane and piston motorsRotary Actuators types and its various applications.Gear actuator and its various types.Vane Actuator and its Various types.Piston actuator and its Various types.*

Class : 29Date : 06.11.2011Unit : IIIPeriod : 3LH / TH : LHTopic : Director control valve 3/2 way valveValvesApplication of Valves.Various types of valves.Principle of DCV3/2 way DCV.

*

Class : 30Date : 11.11.2011Unit : IIIPeriod : 3LH / TH : LHTopic : 4/2 way valve4/2 way DCV*

Class : 31Date : 11.11.2011Unit : IIIPeriod : 4LH / TH : LHTopic : Shuttle valve check valveVarious other Direction Control Valves.Shuttle Valves.Check Valve.Various other valve.*

Class : 32Date : 11.11.2011Unit : IIIPeriod : 7LH / TH : LHTopic : Pressure control valve pressure reducing valvePressure Control valve and its applications.Working principle of the PCV.Various types of pressure regulating valves.Pressure control valve.Pressure reducing valve.*

Class : 33Date : 13.11.2011Unit : IIIPeriod : 3LH / TH : LHTopic : Sequence valve, Flow control valve fixed and adjustableWorking principle of sequence valve.Flow control devices and its applications.Various flow control valves.Fixed flow control valveVariable flow control valve.*

Class : 34Date : 18.11.2011Unit : IIIPeriod : 7LH / TH : LHTopic : Electrical control solenoid valves, relays, Ladder diagramElectrical control valves and its advantages.Various electrical control valves based on applications.Solenoid valves.Relays.Ladder diagram and its applications.*

Class : 35Date : 20.11.2011Unit : IIIPeriod : 3LH / TH : THTopic : Electrical control solenoid valves, relays, Ladder diagramVarious electrical control valves based on applications.Ladder diagram and its applications.With Circuits.

*

Class : 36Date : 22.11.2011Unit : IIIPeriod : 3LH / TH : Topic : Class Test III : ValvesAny 3 Questions3/2 DCV valvePressure Reducing valve Shuttle valve, check valve and sequence valveLadder Diagram.*

Class : 37Date : 22.11.2011Unit : IIIPeriod : 4LH / TH : -Topic : Class Test III : ValvesAny 3 Questions3/2 DCV valvePressure Reducing valve Shuttle valve, check valve and sequence valveLadder Diagram.

*

Class : 38Date : 25.11.2011Unit : IIIPeriod : 7LH / TH : LHTopic : Types of accumulators, sizing of accumulatorsAccumulator.Application of Accumulator.Various types of accumulator.Sizing of accumulator.*

Class : 39Date : 27.11.2011Unit : IIIPeriod : 3LH / TH : LHTopic : Accumulators circuits4 Application circuits of accumulator.

*

Class : 40Date : 29.11.2011Unit : IIIPeriod : 3LH / TH : THTopic : Accumulators circuits4 Application circuits of accumulator.

*

Class : 41Date : 29.11.2011Unit : IIIPeriod : 4LH / TH : LHTopic : Intensifier, applications of intensifier, intensifier circuit.Intensifier.Application of Intensifiers.Operating principle of intensifier.

*

Class : 42Date : 01.09.2011Unit : IIIPeriod : 7LH / TH : THTopic : Intensifier applications of intensifier intensifier circuit.Intensifier application circuits*

Class : 43Date : 03.09.2011Unit : IVPeriod : 3LH / TH : LHTopic : Introduction to pneumatics, properties of airPneumatics.Need for pneumatics.Comparison of hydraulics and pneumatics.Application, advantages and disadvantage.Properties of Air.

*

Class : 44Date : 05.09.2011Unit : IIIPeriod : 3LH / TH : Topic : Class test IV : Accumulator & Intensifier Any Three Circuits with flow diagram.Application of accumulator.Application of Intensifier.*

Class : 45Date : 05.09.2011Unit : IIIPeriod : 4LH / TH : Topic : Class test IV : Accumulator & Intensifier Any Three Circuits with flow diagram.Application of accumulator.Application of Intensifier.

*

Class : 46Date : 11.09.2011Unit : IVPeriod : 7LH / TH : LHTopic : Compressors CompressorWorking principleTypes of compressorApplication, Advantage, and disadvantage of compressors.*

Class : 47Date : 10.09.2011Unit : IVPeriod : 3LH / TH : LHTopic : Filter, regulator, lubricator unit Construction and working principle of Filter, Regulator and Lubricator.*

Class : 48Date : 12.09.2011Unit : IVPeriod : 3LH / TH : LHTopic : Air control valves, quick exhaust valves Air control valves and its application circuits.Quick exhaust valves and its application circuits.

*

Class : 49Date : 12.09.2011Unit : IVPeriod : 4LH / TH : LHTopic : Pneumatic actuators Pneumatic actuators.Various types of the pneumatic actuators.Application of pneumatic actuators.*

Class : 50Date : 15.09.2011Unit : IVPeriod : 7LH / TH : LHTopic : Fluid power circuit design Various types of fluid power application with circuit designs.*

Class : 51Date : 17.09.2011Unit : IVPeriod : 3LH / TH : LHTopic : Speed control circuits, synchronizing circuit, penumo hydraulic circuit, sequential circuitVarious speed control circuits.synchronizing circuit design, penumo hydraulic circuit, sequential circuit.*

Class : 52Date : 19.09.2011Unit : IVPeriod : 3LH / TH : LHTopic : Class Test V : Compressor and valvesVarious types of compressors.Circuits using pneumatic valves*

Class : 53Date : 19.09.2011Unit : IVPeriod : 4LH / TH : LHTopic : Class Test V : Compressor and valvesVarious types of compressors.Circuits using pneumatic valves

*

Class : 54Date : 22.09.2011Unit : IVPeriod : 7LH / TH : THTopic : Speed control circuits, synchronizing circuit, penumo hydraulic circuit, sequential circuitVarious speed control circuits.synchronizing circuit design, penumo hydraulic circuit, sequential circuit.

*

Class : 55Date : 24.09.2011Unit : IVPeriod : 3LH / TH : THTopic : Speed control circuits, synchronizing circuit, penumo hydraulic circuit, sequential circuitVarious speed control circuits.synchronizing circuit design, penumo hydraulic circuit, sequential circuit.

*

Class : 56Date : 26.09.2011Unit : IVPeriod : 3LH / TH : LHTopic : Class Test VI : Fluid power CircuitsAny three circuits with flow diagramVarious speed control circuits.synchronizing circuit design, penumo hydraulic circuit, sequential circuit.

*

Class : 57Date : 26.09.2011Unit : IVPeriod : 4LH / TH : LHTopic : Class Test VI : Fluid power CircuitsAny three circuits with flow diagramVarious speed control circuits.synchronizing circuit design, penumo hydraulic circuit, sequential circuit.

*

Class : 58Date : 29.09.2011Unit : IVPeriod : 7LH / TH : LHTopic : Design for simple applications using cascade methodCascade method circuit design procedure and application*

Class : 59Date : 01.10.2011Unit : IVPeriod : 3LH / TH : LHTopic : Design for simple applications using cascade methodCascade method circuit design

*

Class : 60Date : 03.10.2011Unit : VPeriod : 3LH / TH : THTopic : Design for simple applications using cascade method Cascade method circuit design

*

Class : 61Date : 03.10.2011Unit : VPeriod : 4LH / TH : LHTopic : Servo systems hydro mechanical servo systems.

Application circuit for servo system.Application circuit for hydro mechanical systemApplication circuit for hydro mechanical servo system.*

Class : 62Date : 06.10.2011Unit : VPeriod : 7LH / TH : LHTopic : Electro hydraulic servo systems & proportional valvesApplication of circuits using electro servo systemApplication circuit using proportional valves.*

Class : 63Date : 11.10.2011Unit : VPeriod : 3LH / TH : LHTopic : Introduction to fluidic devices Fluidics devices.Application of fluidicsWorking principle of fluidicsAdvantages and disadvantage of fluidics.*

Class : 64Date : 10.10.2011Unit : VPeriod : 3LH / TH : LHTopic : Class Test VII : Cascade Method Cascade circuit design*

Class : 65Date : 10.10.2011Unit : IVPeriod : 4LH / TH : LHTopic : Class Test VII : Cascade Method Cascade circuit design

*

Class : 66Date : 13.10.2011Unit : VPeriod : 7LH / TH : LHTopic : simple circuits Application circuits using fluidics.*

Class : 67Date : 15.10.2011Unit : VPeriod : 3LH / TH : THTopic : simple circuits Application circuits using fluidics.

*

Class : 68Date : 17.10.2011Unit : VPeriod : 3LH / TH : LHTopic : Introduction to electro hydraulic pneumatic logic circuitsLogicsLogic gates.Electro hydraulic pneumatic logic circuits.*

Class : 69Date : 17.10.2011Unit : VPeriod : 4LH / TH : LHTopic : Ladder diagramsLadder Diagram.Components of ladder diagram.Ladder diagram design procedure.Ladder diagram for an application.*

Class : 70Date : 20.10.2011Unit : VPeriod : 7LH / TH : LHTopic : PLCBasics of PLCPLC application, merits and demerits.Low cost automation using PLC.*

Class : 71Date : 22.10.2011Unit : VPeriod : 3LH / TH : THTopic : PLCLow cost automation using PLC circuits.

*

Class : 72Date : 24.10.2011Unit : VPeriod : 3LH / TH : LHTopic : Applications in fluid power controlVarious application of fluid power control circuits.*

Class : 73Date : 24.10.2011Unit : VPeriod : 4LH / TH : THTopic : Applications in fluid power controlVarious application of fluid power control circuits.

*

Class : 74Date : 27.10.2011Unit : VPeriod : 7LH / TH : LHTopic : Fluid power circuits, failure & troubleshooting

Failure and trouble shooting of various fluid power circuits.*

Class : 75Date : 29.10.2011Unit : VPeriod : 3LH / TH : LHTopic : Class test VIII : PLCLow cost automation.PLC with ladder diagram.*

Class : 76Date : 31.10.2011Unit : VPeriod : 3LH / TH : LHTopic : Doubt Clarification SessionAny Doubt in Unit I, II and III.A Overview of the subject.

*

Class : 77Date : 31.10.2011Unit : VPeriod : 4LH / TH : LHTopic : Doubt Clarification SessionAny Doubt in Unit IV and V.A Overview of the subject.

*

Class : 78Date : 03.11.2011Unit : VPeriod : 7LH / TH : LHTopic : Doubt Clarification SessionDoubt on any topics.A overview of the subject recap. *

Class : 79Date : Unit : Period : LH / TH : Topic : Recap SessionA overview of the subject recap.*

Class : 79Date : Unit : Period : LH / TH : Topic : Recap SessionA overview of the subject recap.*

Class : 79Date : Unit : Period : LH / TH : Topic : Open Book TestAs mentioned..*

Open book test and Recap done till the last day of syllabus completion*

Thank U

All the Best to get Good marks in the Examination.*

Notes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and PneumaticsNotes On Lesson - ME1305 -Applied Hydraulics and Pneumatics