CAN +1 438 807 0872US +1 650 410 3120

sales@aon3d.com

Choosing the right 3D printer is a complex process. Get in touch with one of our engineers

Looking for more information?

AON-M2High-Temperature Industrial 3D Printer

The AON-M2 was built to work with high-performance thermoplastics such as PEEK, ULTEM®, and much more

Contact

Made in Canada

Technology

Build Volume

Max Speed

Z Layer Height

Max. Temperatures

Materials

Printing

Software & ConnectivitySlicer Control Interface

PhysicalBuild Plate Toolheads

Nozzle Sizes (mm)

Filament Size (mm)

Resolution

Electrical Supply VoltageOutlet

Fused Filament Fabrication (FFF)

454 x 454 x 640 mm, 18 x 18 x 25 in

500 mm/s

≥ 0.05 mm to 0.5 mm

470°C+200°C+120°C+

PEEK, PEKK, PEI (ULTEM®), PPSU, PSU, PPS, Nylon, PC, TPU, TPE, PETs, HIPS, PVA, ASA, ABS, etc.Carbon or other fiber filled variants of the above. Various soluble and breakaway support materials

Simplify3DLCD control screen. WiFi enabled. Ethernet.

Hot End

Heated Bed

Build Chamber

208V-240 V, 20 A, 50/60 Hz, Single PhaseL6-20

ALCA 5 precision aluminum base. Hot-swappable. Multiple build surfaces available.

Dual, fully independent

Hardened Steel: 0.25, 0.3, 0.4, 0.6 (default), 0.8, 1.0, 1.2

1.75

XY: 0.025 mm Z: 0.001 mm

Additional Features

Fully enclosed, activelyheated chamber

Dual Independent Extruders

Automatic bed leveling

Filament run-out detection

Watercooled hot-ends and steppers

Hot-swappable build plate

!

AON-M2 3D PRINTER SPECIFICATIONS

(theoretical)