Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
©Toshiba Medical Systems Corporation 2014. All rights reserved.Design and speci�cations subject to change without notice.MCAXR0258EAA 2014-11 TME/D
http://www.toshibamedicalsystems.com
Printed in Japan
Toshiba Medical Systems Corporation meets internationally recognized standards for Quality Management System ISO 9001, ISO 13485.
Toshiba Medical Systems Corporation Nasu Operations meets the Environmental Management System standard ISO 14001.
Aquilion, Aquilion ONE are trademarks of Toshiba Medical Systems Corporation.
Angio CT Suite
Line up
Aquilion LB
Typical Layout
Aquilion PRIME Aquilion ONE
2,000 8,500Center of the table 5,300
Cent
er o
f the
tabl
e 3
,400
Computer room
Angiography room
Control room
6,5
00 2
,300
Angio CT SuiteSame-room installation
Work more e�ciently and e�ectively.
High-level integration of an angiography system and a CT system
creates new potential for medical sites.
Self-propelled helical CT scanner
Ceiling-suspended C-arm
The wide operating range of the self-propelled CT gantry and the C-arm provides �exible system positioning for angiography and CT scanning, allowing helical scanning to be performed without moving the patient. Since the same table is used for both angiography and CT scanning, patient positioning can be performed easily during sequential angiography and CT scanning procedures.
The rails for the self-propelled CT gantry are �ush with the �oor. The level �oor and rail surface allows peripheral devices such as ultrasound systems to be moved smoothly over the rails.
The monitor suspension can be set on either side of the table. This enables �exible spatial arrangement and allows medical sta� to work in the optimum position for the procedure.
Angio CT same-room installation provides the �exible workspace required for a variety of procedures.
When both the C-arm and CT gantry are at the park position
Abundant workspace is ensured.
The tabletop is moved, allowing quick switching between the angiography and CT system.
Angiography
When the CT gantry is set to the park position, there is no interference with operation of the angiography system.
CT scan
When the C-arm is set to the park position, there is no interference with CT scanning.
Efficient workflow Non-protruding rails Flexible spatial arrangement
Mo
re e
�c
ien
t an
d e
�e
ctiv
e a
t wo
rk.Switching between Angio and CT
Angio CT SuiteSame-room installation