Andersen / Pella Casement & Awning Operators

AndersenSpecify Handing.Right Hand Shown

ANDERSEN

3-7/8"

58-2 Crank Handle soldseparately. Track soldseparately.Order 58-Channel.

Please send a sample foraccurate identification

58 Right HandShown

Andersen2073

**Includes 975-1 Crank Handle.

9/16"

*9" & 11" Arm

Offset-down

1-1/2"1-1/2"

2-3/4"

3-7/8"

1-3/16"

Andersen

Left Hand ShownBracket soldseparately

10002

TOP VIEW OF HOUSING

3-7/8"

Andersen

4"

Comes with rods and975-1 Crank Handle

Long - 34" Short - 24-7/8"

*Please Specify Long or Short Arms When Ordering:

1285*

17-1/8"12-3/8"

1285Long / Short*

Andersen

33"

5-5/8"

4990

Available in 33",36", 39" ArmsOrder #125-16 1/4replacement trackseparately.

Andersen

4-5/8"

22-7/16"

*Long = 5" Short = 3-5/32"

Please specify.

*

4993*

4"

9-1/2"

Order No. 327 CrankHandle Separately

Left Hand Shown.

Pella9492

9-1/2"

14-3/4"

Right HandShown.

Sill Sizes: 20", 21", 30"

Pella42

* 9-1/4" or 10-1/4"

2026 Andersen

58-RevBlack nylon shoe withslot for channel.Shoe is mountedunder operator arm.

9" or 11"*

Andersen

Andersen / Pella Casement &Awning Operators

17319 Blaine DriveHagerstown, Md 21740

Toll Free: 800-678-1919Fax: 888-250-3960

e-mail: [email protected]: www.blainewindow.com

Right hand shown - see note above

í

*10-1/4"

ANDERSEN

Specify Handing.Right Hand Shown

Track sold separately. Available in 17", 21"& 25". Specify left or right hand.

3"

3-1/8"*9" actual measurement - 8-7/8"11" actual measurement - 11-3/16"

*Arm measuresfrom gear centerto button rivetcenter

*Arm measured from gearcenter to shoe rivet center.

*Arm measured from gearcenter to shoe rivet center

3-1/8"

G5-55

**

Bronze painted finish

UNAVAILABLE

Limited Supply

Left hand available,Limited quantites.Right hand obsolete.Order 2073 shownabove and 2074 track.

58-2 crank handle sold separately.

58-2 crank handlesold separately.

975-1 crankhandle soldseparately.

Comes with #00301 crank handle

UNAVAILABLE

Order10147-061withinstructions.58-2 handle soldseparately.

We have windowoperators for all windowconfigurations. Pleasecontact our CustomerService Department at

800-678-1919 forassistance with your

window hardware needs.

43.54 TRUTH

5/16X 18Tapped

1-1/2"


Toll Free: 800-678-1919Fax: 888-250-3960

Operator

Link

PLEASE MAILYOUR COMPLETESAMPLE (IncludingArm, Link & AllFasteners At TheEnd Of The Link)

1. Operator drilled to your sample.2. Link Attached.3. Crank handle included.4. Fasteners supplied when sample is provided.

Replacement

2-1/4"

2"

5/16-18Threads

Tru•Seal

4-5/8"

5/16-18Thread1-1/2" 7/16"

60-Orig

Sold with #303crank handle.

5"

1-3/8"5/16X 18Tapped

MIAMI

5-1/8"

5/16X 18Tapped

Sold with #901 crankhandle.

3713 80

7/16"

1-7/16"2-3/8"

2-3/16"

Right HandShown

5/16-18Thread

5-1/4"

Comes with No.320 CrankHandle

2066

10-24ThreadedStud

2-1/2"

2-5/16"

1-1/8"

Right HandShown

Comes with#303 CrankHandle

5-1/4"

3718

5"

5"

1-1/2" 5/16" Hex


5/16X 18Tapped

5/16 X 18Tapped

Woodco

4-11/16"


Tapped1/4" - 28

Woodco

Tapped1/4" - 28

4-11/16"


5-7/16"

5/16" HoleDiameter

Right Hand Shown.

Sold with#303 crankhandle.

TOP VIEW OF HOUSING

3-7/8"Offset1/8"

E-RingStud

4-1/4"

Sold with#303crankhandle.

TOP VIEW OF HOUSING

3-7/8"4-3/4"

Right Hand Shown.

UNAVAILABLE

UNAVAILABLE

Unavailable

3707

OffsetArm

2008-Offset2008 Flat 2045 2048

77Replace with No. 77

Replace withNo. 95, at right 95

5-1/8"

73-R

Sold with #320Crank Handle.

CUSTOM AWNING OPERATORS

Awning Operators


Right HandShown

Right Hand

Right HandShown

Flat Arm

Now with newstyle housing.Will differslightly fromthe picture

G5-56

2-3/16"

5-1/4"

2-1/2"

27/32"

7/16"

5/16-18Thread

Sold with#303CrankHandle

Right HandShown

Aluminum Finish

13/16"7/16"

3/8"Dia.

2-3/16" 5-1/4"

Right HandShown

7/16"Sold with No.303 CrankHandle

Aluminum Finish

Order 3707,at left


Toll Free: 800-678-1919Fax: 888-250-3960



LINKOFFSET

SIDE VIEW

TOP VIEW 3-15/16"

Clip

Truth Dual Arm Operator Blaine Part No. Color

*20-1/2"11.43.00.001Arm Length

28-3/4"11.44.00.001 *

.468 Max.

.312A

B

Guide Bar

Shoe Stud

.449

.816 Min.

.204

(Guide Bar) Dual Pull

A

Sash

Frame

1.950

1 Preferred Mounting Holes

1 1

31641 Guide Bar10005 Shoe Studs10341.XX Cover10579.XX Handle31642 Guide Bar

Hardware ShownSold Separately

Recommended Screws:Operators:Wood: 6(P/N 19240.92) Steel SST #8 x 1.0 Phillips, Flat Head, Sheet Metal ScrewsPVC / Metal: 6 #8 Phillips, Flat Head Screws (Length and thread type determined by profile).Guide Bar: 3(P/N 19240.92) #8 x 1.0 Phillips, Flat Head, sheet metal screws.

Truth Casement & Awning Operators

G5-60

15.11.00.001 As Shown15.11.00.002 Opposite

Aluminum & Vinyl Window Awning Operator

Blaine Part No. ColorAluminumClayWhiteChestnut Brz.BronzeWhite

24"24"24"24"24"24"

22.10.01.10222.10.22.10222.10.32.10322.10.23.10422.10.03.10222.19.32.001*

Arm Length

*Note:RM models have rear threaded holes for rearmounting.

22.10 Front Mount22.19 Rear Mount

*

11.43.00.001 20-1-8” (A)11.44.00.001 28-3/4” (A)

*Number 10341 Cover sold separately.

Number 10579 crank handle sold separately. Order handle color to match the cover.

Guide bar sold separately. Order number31641.92 (22-3/4") or 31642.92 (30-3/4").

31641 Guide Bar10005 Shoe Studs10341.XX Cover10579.XX Handle31642 Guide Bar30591 Detach Clips S.S.

Shoes sold separately . Order number 10005

24"

Order 10579.XX crankhandle separately

Track No. 30169 - 2 per operator

“A”

Guide Bar

30591 DetachClip S.S.

Blaine Part No. A22.12511.43.00.001

B

30.12511.44.00.00122.75030.750

*No. 10341 cover sold separately

Truth Dyad Arm Operator

No. 10579 Crank Handle sold sepa-rately. Order color matcing no. 10341cover.

Bracket for end of link sold separately. Order 12511.92bracket for 15.11.00.002 operator. For 15.11.00.001operator, order 12510.92 bracket, as shown

22.21

23.77.XX.001 as shown23.77.XX.002 opposite

Truth Scissors Arm Operator For Awning Windows


9”

Discontinued “Original Style”Arm

9-1/2”

Due to engineering designchanges, “New Style Arm”replaces original.

In some cases the No. 3 position mountingscrew may need to be eliminated or grounddown in length due to interference in the fullclosing position of the arm. Anotheralternative would be to grind a notch in thearm to clear the screw end.

Also available with rear mount housing.Order #23.00.XX.001 as shown, aboveor #23.00.XX.002 opposite


10579.XX crank handlesold separately


Toll Free: 800-678-1919Fax: 888-250-3960


OperatorPart No.

22.21

22.22

22.23

22.27

22.28

22.29

"A"

21-1/2"

21-1/2"

16"

21-1/2"

21-1/2"

16"

Mounting

Front

Rear

Stabilizing Tab

Order Part No. 11481

"B" ArmClearance

1/4"

11/32"

11/32"

1/4"

11/32"

11/32"

10579 Crank handle sold separately

Truth Awning / Casement Operators

G5-61

XX denotes color. Please contactCustomer Service for availablecolors.

Rear Mount (2 Holes) orFront Mount (4 Holes)

Rear Mount Dimension (Inside holes on front mount 6-1/8" c/c)

Scissors Arm Operator ForAwning Windows

10579 Crank HandleSold separately

*Order 20008 Sash Hookseparately

"A"

"B"

13-1/2"

Left Hand

Right Hand


Toll Free: 800-678-1919Fax: 888-250-3960


1001

14 56

2020

2100 3718

CrestlineNo. 361 GoldCrank HandleIncluded

3/8”

Crestline

14 tooth replacement gear forCrestline No. 2020 Operator

Extra 14 Tooth Gears Also Available. Order738. Covers no longer available.

Nowmanufactured by Blaine

738

7/8"

2-7/8"

3-5/8"Peachtree Operator

10-24ThreadedStud

2-1/2"

2-5/16"

1-1/8"

Right HandShown

Sold with#303 CrankHandle

5-1/4"

Aluminum FinishRight hand only asshown

3/8"

2-1/2"

5/16" holeNo threads

5"

3/8"

3-15/16"

3-1/2"

2-7/8"

Sold asa kit

1. Determine the similarity of your sample tothe picture, at left.

2. Note the following:a. 800-A kits work for most obsoletejalousie operators.b. 800-A operators work on the leftand right side.c. 3 links in package allow for besthook-up to replace original.d. Package includes all fasteners.e. Comes in dull aluminum finish

only.

Right Hand Shown.

Arm Lengths: 9", 13"

13"

Detroit Swing Lite



Replacement

9"

Specify Handing.Left Hand Shown.Left Hand MostCommonly Used.

1-3/8"


45 45-1/2

2"

1-1/2"

726

Stanley Stanley

5/16"

11/16"

1/2"

712Ualco

Ualco

45-1/2 currently unavailable

Order No. 468-1" connector separately

Order No. 322 crank handle separately

No. 468-8" extension now unavailable.

Order crank handleseparately:01001-1-060

9”

Bronze painted finish

3-7/16”

11/16”

Nowmanufactured by Blaine

54

Awning Operators

Sold with #303crank handle

4-1/4" hole centers

3-7/8" &4-3/4"holecenters

800A

3/8"Hex

322 Crank handle sold separately

Operator for ResidentialSash. Use with #712Gear, shown at left and#399 Crank Handle . Bothsold separately.

3995/16"

Die CastAluminum Finish

5/16"Hex

3/8"Hex

1-3/4"

1"

2"2-3/4"

1-1/2"

G5-63

10.10 - 20"10.14 - 13"

10.11

11.30 12" arm11.12 16" arm11.10 21" arm

11.14


Toll Free: 800-678-1919Fax: 888-250-3960



2-5/8"Uses one hook

*Measure the distance from thebottom of the mounting plate tothe base (see drawing above).Order the operator by the letterdesignation that corresponds tothe measured distance.

22-3/8"

*Trim Sill GapArm Length: 22-3/8"

If Your Trim Sill Gap Measures:1" order c

C = 3/4" orderE = 1/2" orderF = 3/8" order

2-5/8"Uses two hooks

Arm Length: 25"25"

2-5/8"Uses two hooks

Truth Part No.

11.30.03.00111.30.32.00111.10.29.00111.10.32.00111.10.03.00111.10.24.00111.12.03.00111.12.29.00111.12.32.001

Arm Length Color

BronzeWhiteGoldWhiteBronzeBeigeBronzeGoldWhite

12"12"21"21"21"21"16"16"16"

*

Note: Bronze - Painted Finish

Blaine Part No.

11.14.13.00111.14.29.00111.14.32.00111.14.03.001

Color

BrassGoldWhiteBronze

25"25"25"25"

Arm Length

Note: Bronze - Painted Finish Brass - Bright Plated Finish

Blaine Part No. Color13"20"20"13"13"20"20"20"20"13"20"

10.14.03.00310.10.29.00110.10.03.00310.14.13.00210.14.37.00110.10.13.00210.10.29.00510.10.03.00510.10.37.00110.14.29.00110.10.03.001

BronzeGoldBronzeBrassOff WhiteBrassGoldBronzeOff WhiteGoldBronze

Trim Sill Gap3/4" C3/4" C3/4" C3/8" F1/2" E1/2" E1/2" E1/2" E1/2" E3/8" F3/8" F

Arm Length

Truth Part No. Color22-3/8"22-3/8"22-3/8"22-3/8"22-3/8"22-3/8"22-3/8"

10.11.29.00410.11.03.00510.11.13.10210.11.03.00310.11.29.00210.11.03.00110.11.32.001

GoldTrim Sill Gap

3/4" 3/4" 1/2" 1/2" 3/8" 3/8" 3/8"

Arm Length

Order 10579.XX crank handle separately

Order 10579.XX crankhandle separately

BronzeBrassBronzeGoldBronzeWhite

Truth Awning Operators

G5-64

Specify 13" or 20"

C = 3/4”E = 1/2"F = 3/8"

Truth Wood Window Awning Operator

*Measure the distancefrom the bottom of themounting plate to thebase (see drawingabove). Order theoperator by the letterdesignation thatcorresponds to themeasured distance.

2-5/8"

Uses one hook

20008 Hook

20008 Hook

20008 Hook

20008 Hook

Note: Bronze - Painted Finish Brass - Bright Plated Finish

Documents

Andersen / Pella Casement & Awning Operators