r G

l

za -< '-'"" zU w;f;

AND PENDING PATENTS

PLEASE CONTACT DISTRIBUTOR FOR MORE DETAILS REGARDING POTENTIAL CARRIER MACHINES AND INSTALLATION.

840 CRUSHER 848 CRUSHER Engine

Type 11 J Caterpillar® C-15 11 J Caterpillar® C-15 turbocharger and turbocharger and air-to-air oftercooler air-to-air oftercooler

Rated Power @ 2,100 rpm 502 SAE net hp 1375 kW) 502 SAE net hp 1375 kW) 540 SAE gross hp 1403 kW) 540 SAE gross hp 1403 kW)

Cylinders 6 6 Displacement 928 cu. in. I 15.2 L) 928 cu. in. I 15.2 L)

Max Net Torque@ 1,400 rpm 1,819 lb.-ft. 12,466 Nm) 1,819 lb.-ft.12,466 Nm) Air Cleaner Dual-Stage dry type Dual-Stage dry type

Radiator Mesabi© Mesabi©

Hydraulic System

System Relief Pressure 6,000 psi 141,369 kPa) 6,000 psi 141,369 kPa) Pumps 12) Rexroth© 180 cc 12) Rexroth© 180 cc

Motors 12) Rexroth© 180 cc 12) Rexrath© 180 cc Maximum Flow 200 gpm 1757 L/min) 200 gpm 1757 L/min)

Filter, Return Oil 10 micron 10 micron

Cutter Drives

Type 12) O&K© F-100 12) O&K© F-100 Total Ratio 21 to 1 21 to 1

Capacities

Fuel Tank 165 gal. 1625 L) 165 gal. 1625 L) Hydraulic System Reservoir 75 gal. 1284 L) 75 gal. 1284 L)

Dry Weights

Cutter Assembly 20,722 lb. 19,399 kg) 25,074 lb. 111,373 kg) Engine Package 10,700 lb. 14,853 kg) 10,700 lb. 14,853 kg)

ronWolf WWW .IRO N WOLF.COM

Dimensions

A Width cf Cutter Assembly B Length of Cutter Assembly C Height cf Cutter Assembly D Diameter of Drum

G H

!Tooth to Tooth) Maximum Cutting Depth

Cutting Width Width of Engine Package Length of Engine Package Height of Engine Package

Options Heavy Cutter Assembly

Cutter Tilt

Cutter Drum Patterns

Recommended Carrier Machine

840 CRUSHER

114 in. 12,896 mm) 88 in. 12,235 mm) 50 in. 11,270 mm) 40 in. 11,016 mm)

12 in. 1305 mm) 96 in. 12,438 mm) 115 in.12,921 mm) 54 in. 11,372 mm) 98 in. 12,489 mm)

Increases weight per

tooth ratio. Adds 3,925 lbs.11,780 kg)

848 CRUSHER

114 in. 12,896 mm) 96 in. 12,438 mm) 56 in. 11,422 mm) 48 in. 11,219 mm)

16 in. 1406 mm) 96 in. 12,438 mm) 115 in. 12,921 mm) 54 in.11,372 mm) 98 in. 12,489 mm)

Increases weight per

tooth ratio. Adds 4,822 lbs. 12,187 kg)

lo the cutter assembly. to the cutter assembly. Enables side to side grade control up to 7 degrees of tilt. Optimizes production for particular applications.

CAT 966, John Deere 744-J, CAT 972, John Deere 824-J, or equivalent wheel loader or larger. The 840 Crusher with the heavy cutter assembly or tilt option requires o CAT 966, John Deere 824-J, or equivalent wheel loader or larger.

or equivalent wheel loader or larger. The 848 Crusher with the heavy cutter assembly or tilt option requires a CAT 980, John Deere 824-J, or equivalent wheel loader or larger.

9000 S HWY 77 • NOBLE, OKLAHOMA 73068

V: 405.872.1890 F: 405.872.1893 • www.ironwolf.com

111:0NWOtF RESERVES THE RIGHT TO MAKE CHANGES IN ENGINEERING, DESIGN AND SPECIFICATIONS; ADD IMPll:OVEMENTS; 011: DISCONTINUE MANUFACTUll:ING AT ANY TIME WITHOUT NOTICE 011: OBLIGATION. CATEll:PltlAll:e IS A

11:EGISTEll:ED Tll:ADEMAll:K OF CATEll:PlllAII:, INC. 11:EXll:OTHe IS A 11:EGISTEll:EO Tll:ADEMAll:K OF BOSCH 11:EXll:OTH AG. MESABI• IS A 11:EGISTEll:ED TRADEMAll:K OF t & M 11:ADIATOII:, INC. O&K• IS A 11:EGISTEll:ED TRAOEMAll:K OF 011:ENSTEIN &

KOPPEL AKTIENGESEtlSCHAFT COll:P. COPYll:IGHTC 2006 111:0NWOLF. All 11:IGHTS 11:ESEll:VEO.