Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
AN ISO 9001 & 14001 COMPANY
TENDER DOCUMENT
TENDER No: WRO/CON/691A/0162
FOR
Construction of Extension for New Girls Hostel Building,
NID Paldi Campus, Ahmedabad
VOLUME – III
PRICE BID
1 2 3 4
In figures In words In figures In words
1Construction of Extension for New Girls
Hostel Building28129333
2 Taxes including GST
Total
BIDDERS FINANCIAL OFFER:
(In Figures)______________________________________________________________________________________________________________________________
(In Words)_______________________________________________________________________________________________________________________________
Price Bid for Construction of Extension for New Girls Hostel Building, NID Paldi Campus, Ahmedabad
PRICE SCHEDULE
SI. No. DESCRIPTIONESTIMATED COST (Rs.)
(ExcludingTaxs / GST)
TO BE QUOTED BY TENDERER
% ( - ) Below / At Par/Above Amount ( - ) Below / At Par / Above Estimated Cost
5= (3 x 4 )
Sign and stamp of EPIL 1 Sign and stamp of Contractor
SR No DESCRIPTION AMOUNT
1 Earth Works 3,56,549
2 Concrete Works 4,54,318
3 RCC Works 85,40,540
4 Brick Work 11,58,088
5 Marble/Granite Works 19,198
6 Wood & PVC Works 25,33,440
7 Flooring Works 33,27,252
8 Finishing Works 4,65,932
9 Aluminium Works 1,39,217
10 Water Proofing Works 1,84,275
11 R/F Steel 46,47,180
12 ELECTRICAL WORKS 13,66,085
13 PLUMBING & SANITARY 6,38,770
TOTAL FOR DSR ITEMS 2,38,30,844
SR No DESCRIPTION AMOUNT
1 EXPOSED BRICK WORK 19,76,760
2 EXPOSED CONCRETE WORK 6,66,900
3 MISCELLENEOUS WORKS 7,63,706
4 CCTV 75,000
5 PLUMBING WORK 2,89,123
6 ELECTRICAL WORK 5,27,000
TOTAL FOR NON DSR ITEMS 42,98,489
GRAND TOTAL-(DSR + NON DSR ITEMS) 2,81,29,333
SUMMARY DSR WORKS
SUMMARY DSR WORKS
Client : NATIONAL INSTITUTE OF DESIGN
Executing Agency: Engineering Projects India Ltd. (EPIL)
Project Name: Construction of Extension for New Girls Hostel Building
Type of Structure: RCC Framed Structure, G+4
Total Built-up Area : 1005 sq.mts.
2
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
1.0 2.000 EARTH WORK
1.0 2.600
Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means over areas
(exceeding 30 cm in depth 1.5 m in width as well as
10 sqm on plan) including disposal of excavated earth,
lead up to 50m and lift up to 1.5 m disposed earth to
be leveled and neatly dressed.
1.1 2.6.1 All kinds of soil cum 514 125.95 64,738
1.2 2.260Extra for every additional lift of 1.5 m or part thereof
in
1.3 2.26.1 All kinds of soil (1.5 mt to 3.0 mt) cum 431 51.75 22,304
1.4 2.250
Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc.in layers not
exceeding 20 cm in depth, consolidating each
deposited layer by ramming and watering, lead up to
50 m and lift up to 1.5 m.
cum 536 125.75 67,402
1.5 2.340Supplying chemical emulsion in sealed
containers including delivery as specified.
2.34.1Chlorpyriphos/ Lindane emulsifiable concentrate of
20%Litre 762 185.95 1,41,694
1.6 2.35.3
Treatment of soil under existing floors using chemical
emulsion @ one litre per hole, 300 mm apart
including drilling 12 mm diameter holes and
plugging with cement mortar 1 :2 (1 cement : 2
Coarse sand) to match the existing floor :
2.35.3.1With Chlorpyriphos/Lindane E.C. 20% with 1%
concentrationSqm 458 131.90 60,410
Subtotal 3,56,549
2.0 4.000 CONCRETE WORK
Providing and Laying in position cement concrete of
specified grade excluding the cost of centring and
shuttering – All work upto plinth level.
2.1 4.1.31:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)cum 80 5481.95 4,38,556
2.3 4.170
Making plinth protection 50 mm thick of cement
concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size) over 75mm
thick bed of dry brick ballast 40 mm nominal size, well
rammed and consolidated and grouted with fine
sand, including finishing the top smooth.
Sqm 35 450.35 15,762
Subtotal 4,54,318
Client : NATIONAL INSTITUTE OF DESIGN
Architect: R T & ASSOCIATES PVT LTD.
PART - I BOQ for Construction of Extension for New Girls Hostel Building, NID Paldi
Campus, Ahemdabad
Executing Agency: Engineering Projects India Ltd. (EPIL)
Project Name : New Girls Hostel Building Extension
Type of Structure : RCC Framed Structure, G+4
Total Built-up Area : 1005 sq.mts.
Sign and stamp of EPIL 3 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
3.0 5.000 REINFORCED CEMENT CONCRETE WORK
3.1 5.9Centring and shuttering including strutting, propping
etc. and removal of form for:
3.1.1 5.9.1Foundations, footings, bases of column etc. for mass
concrete.Sqm 660 193.95 1,28,007
3.2 5.370
Providing and laying in position ready mixed M-25
grade concrete for reinforced cement concrete work,
using cement content as per approved design mix,
manufactured in fully automatic batching plant and
transported to site of work in transit mixer for all
leads, having continuous agitated mixer,
manufactured as per mix design of specified grade for
reinforced cement concrete work, including pumping
of R.M.C. from transit mixer to site of laying ,
excluding the cost of centering, shuttering finishing
and reinforcement, including cost of admixtures in
recommended proportions as per IS : 9103 to
accelerate/ retard setting of concrete, improve
workability without impairing strength and durability
as per direction of the Engineer - in - charge.
(Note :- Cement content considered in this item is
@ 330 kg/cum. Excess/less cement used as per design
mix is payable/recoverable separately).
3.2.1 5.37.1 All Works up to Plinth Level cum 301 6317.60 19,01,598
3.2.2 5.37.2 All Works above Plinth Level upto Floor V Level cum 757 7517.20 56,90,520
Subtotal
FORMWORK
3.4 5.9Centering and shuttering including strutting, propping
etc. and removal of form for all heights :
3.4.1 5.9.3 Suspended floors, roofs, landings, balconies and access platformSqm 850 422.30 3,58,955
3.4.2 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantileversSqm 800 342.90 2,74,320
3.4.3 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 400 467.85 1,87,140
Subtotal 85,40,540
4.0 6.000 BRICK WORK
4.0 6.400
Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level in
all shapes and sizes in :
4.1 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 198 5582.85 11,05,404
4.2 6.130
Half brick masonry with common burnt clay F.P.S.
(non modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level.
4.3 6.13.2 Cement Mortar 1:4 (1 cement : 4 coarse sand) sqm 77 684.20 52,683
Subtotal 11,58,088
5.0 8.000 MARBLE GRANITE WORKS
Sign and stamp of EPIL 4 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
8.200
Providing and fixing 18 mm thick gang saw cut, mirror
polished, premoulded and prepolished, machine cut
for kitchen platforms, vanity counters, window sills ,
facias and similar locations of required size, approved
shade, colour and texture laid over 20 mm thick base
cement mortar 1:4 (1 cement : 4 coarse sand), joints
treated with white cement, mixed with matching
pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss
finish etc. complete at all levels.
8.2.2 Granite of any colour and shade
5.1 8.2.2.2 Area of slab over 0.50 sqm sqm 4 3113.30 12,453
8.300
Providing edge moulding to 18mm thick marble stone
counters,Vanities etc. Inbcluding machine polishing to
edge to give high gloss finish etc. complete as per
design approved by Engineer-in-Charge
5.2 8.3.2 Granite work metre 17 245.70 4,177
5.3 8.500
Extra for providing opening of required size &
shape for wash basins/kitchen sink in kitchen
platform, vanity counters and similar location in
marble/stone work including necessary holes for pillar
taps etc .including rubbing and polishing of cut edges
etc. complete.
each 6 427.95 2,568
Subtotal 19,198
6.0 9.000 WOOD AND PVC WORK
Room Doors
9.200
Providing and fixing ISI marked flush door shutters
conforming to IS : 2202 (Part I) decorative type, core
of block board construction with frame of 1st class
hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers
on both faces of shutters.
6.1 9.20.135 mm thick including ISI marked Stainless Steel butt
hinges with necessary screws.sqm 83 2488.95 2,06,583
6.2 9.240
Extra for providing vision panel not exceeding 0.1 sqm
in all type of flush doors (cost of glass excluded)
(overall area of door shutter to be measured):
9.24.1 Rectangular or square sqm 17 162.60 2,764
6.3 9.530
Providing 40x5 mm flat iron hold fast 40 cm long
including fixing to frame with 10 mm diameter bolts,
nuts and wooden plugs and embeddings in cement
concrete block 30x10x15cm 1:3:6 mix (1cement : 3
coarse sand : 6 graded stone aggregate 20mm
nominal size)
each 122 118.60 13,026
6.4 9.970
Providing and fixing aluminium tower bolts, ISI
marked, anodised (anodic coating not less than grade
10 as per IS:1868), transparent or dyed to required
colour or shade, with nuts and screws etc. complete
9.97.2 250x10 mm each 41 88.10 3,612
6.5 9.101
Providing and fixing aluminium hanging type floor
door stopper (anodic coating not less than grade 10
as per IS:1868), transparent or dyed to required
colour or shade, with nuts and screws etc. complete
each 41 27.55 1,130
Sign and stamp of EPIL 5 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
9.101.1 Single rubber stopper
6.6 9.840
Providing and fixing aluminium extruded section body
tubular type universal hydraulic door closer (having
brand logo with ISI, IS : 3564, embossed on the body,
door weight upto 36 kg to 80 kg and door width from
701 mm to 1000 mm), with double speed adjustment
with necessary accessories and screws etc. complete.
each 6 388.40 2,330
6.7 9.96
Providing and fixing aluminium sliding door bolts ISI
marked anodised anodic coating not less than grade
AC
10 as per IS:1868) transparent or dyed to
required colour or shade, with nuts and screws, etc.
complete
9.96.2 250x16 each 194 189.20 36,705
Wooden frames-Toilet (Internal Doors)
6.8 9.1
Providing woodwork in frames of doors, windows,
clerestory windows and other frames, wrought
framed and fixed in position and hold fast lugs or with
dash fasteners of requiired dia & length (hold fast and
lugs shall be paid seperately)
9.1.2 Sal wood (Toilet Internal doors) cum 8 85386.95 6,83,096
Wooden frames-(All other Doors)
6.9 9.1
Providing woodwork in frames of doors, windows,
clerestory windows and other frames, wrought
framed and fixed in position and hold fast lugs or with
dash fasteners of requiired dia & length (hold fast and
lugs shall be paid seperately)
cum 17 92743.05 15,76,632
6.1 9.100
Providing and fixing aluminium handles, ISI marked,
anodised (anodic coating not less than grade AC 10 as
per IS:1868) transparent and dyed to required colour
and shade, with necessary screws etc. complete
9.100.1 125mm each 148 51.10 7,563
Subtotal 25,33,440
7.0 11.000 FLOORING
11.260
Kota stone flooring over 20 mm (average) thick base
laid over and jointed with grey cement slurry mixed
with pigment to match the shade of the slab including
rubbing and polishing complete with base of 1:4 (1
cement : 4 coarse sand)
7.1 11.26.1 25 mm thick sqm 985 1158.10 11,40,729
7.1.1 8.600
Mirror polishing on marble work/granite
work/stone work wherever required to give high gloss
finish
sqm 985 231.50 2,28,028
7.2 11.270
Kota stone slabs 20 mm thick in risers of steps,
skirting, dado and pillars laid on 12 mm (average)
thick cement mortar 1:3 (1 cement 3 coarse sand) and
jointed with grey cement slurry mixed with pigment
to match the shade of the slabs, including rubbing
and polishing complete.
sqm 127 1238.20 1,57,251
7.2.1 8.600
Mirror polishing on marble work/granite
work/stone work wherever required to give high gloss
finish
sqm 127 231.50 29,401
11.310Extra for prefinished nosing in treads of steps of Kota
stone/sand stone slabrmt 126 84.55 10,653
11.310Extra for grooving in treads of steps of Kota
stone/sand stone slabrmt 126 84.55 10,653
Sign and stamp of EPIL 6 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
7.3 11.430
Fixing glazed/ Ceramic / Vitrified floor tiles with
cement based high polymer modified quick-set tile
adhesive ( Water based ) conforming to IS : 15477,
Adhesive per sqm of tile area, in average 3mm
thickness.
sqm 853 386.20 3,29,429
7.4 11.470
Providing and laying Vitrified tiles in different sizes
(thickness to be specified by the manufacturer), with
water absorption less than 0.08% and conforming to
IS: 15622, of approved brand & manufacturer, in all
colours and shade, in skirting, riser of steps, laid with
cement based high polymer modified quick set tile
adhesive (water based) conforming to IS: 15477, in
average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made
separately).
11.47.2 Size of Tile 60x60 cm sqm 853 1240.60 10,58,232
MIRROR POLISH ON MOSAIC FLOORING FOR
ROOMS AND PASSAGES
7.5 8.600
Mirror polishing on marble work/granite
work/stone work wherever required to give high gloss
finish
a Flooringsq.mt
s853
b Skirtingsq.mt
s66
919 231.50 2,12,749
7.6 11.44
Crazy ceramic tile flooring, with under layer 12 mm
thick cement mortar 1:4 (1 cement: 4 coarse sand),
with joints not exceeding 5 mm, including filling the
gaps with ordinary cement mixture & mixing with
syntheticpolyester fibre, triangular in shape having
specific gravity of 1.34 to 1.40, cross section size
ranging from 10 to 40 micron & length upto 6 mm,
mixing fibre @ 125 grams per 50 kg of cement in
cement mortar, including providing and mixing water
proofing material in mortar @ 1 kg per 50 kg of
cement , all complete as per direction of Engineer-
incharge.
sqm 315 476.6 1,50,129
Subtotal 33,27,252
8.0 13.000 FINISHING WORK
13.100 12 mm cement plaster of mix:
8.1 13.1.1 1 : 4 (1 Cement : 4 fine sand) sqm 2310 172.95 3,99,515
8.2 13.370 Whitewashing with lime to give an even shade
13.37.1 New work (two or more coats) sqm 1650 17.25 28,463
8.3 13.39Colour washing such as green, blue or buff to give an
even shade
Sign and stamp of EPIL 7 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
13.39.1New work (two or more coats) with a coat of white
washing with limesqm 688 23.60 16,237
8.4 13.61Painting with synthetic enamel paint of approved
brand and manufacture to give an even shade
13.61.1 Two or more coats on new work sqm 170 78.40 13,328
8.5 13.68Polishing on woodwork with ready mixed wax polish
of approved brand and manufacturer
13.68.1 New work sqm 40 209.75 8,390
Subtotal 4,65,932
9.0 21.000 ALUMINIUM WORK
21.100
Providing and fixing aluminium work for doors,
windows, ventilators and partitions with extruded
built up standard tubular sections/ appropriate Z
sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and
sides with required EPDM rubber/ neoprene gasket
etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminium snap
beading for glazing / paneling, C.P. brass / stainless
steel screws, all complete as per architectural
drawings and the directions of Engineer-in charge.
(Glazing, paneling and dash fasteners to be paid for
separately) :
9.1 21.1.2
For shutters of doors, windows & ventilators including
providing and fixing hinges/ pivots and making
provision for fixing of fittings wherever required
including the cost of EPDM rubber / neoprene gasket
required (Fittings shall be paid for separately)
21.1.2.2Powder coated aluminium (minimum thickness of
powder coating 50 micron)Kg 165 444.90 73,409
9.2 21.300
Providing and fixing glazing in aluminium door,
window, ventilator shutters and partitions etc. with
EPDM rubber / neoprene gasket etc. complete as per
the architectural drawings and the directions of
engineer in-charge. (Cost of aluminium snap beading
shall be paid in basic item):
21.3.2 With float glass panes of 5.50 mm thickness sqm 61 1003.95 61,241
9.3 21.800
Filling the gap in between aluminium frame &
adjacent RCC/ Brick/ Stone work by providing weather
silicon sealant over backer rod of approved quality
as per architectural drawings and direction of
Engineer- in-charge complete.
21.8.1 Upto 5mm depth and 5 mm width metre 66 62.45 4,122
9.4 9.12
Extra for providing frosted glass panes 4mm thick
instead of ordinary float glass panes 4mm thick in
doors, windows and clerestory window shutters.
(Area of opening for glass panes excluding portion
inside rebate shall be measured)
sqm 6 74.35 446
Subtotal 1,39,217
10.0 22.000 WATER PROOFING WORK
Sign and stamp of EPIL 8 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
10.1 22.300
Providing and laying water proofing treatment to
vertical and horizontal surfaces of depressed portions
of W.C., kitchen and the like consisting
of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm
mixed with water proofing compound conforming to
IS 2645 in recommended proportions including
rounding off junction of vertical and horizontal
surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1
cement : 3 coarse
sand) mixed with water proofing compound in
recommended proportion including rounding off
junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen
applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet.
(Overlaps at joints of PVC sheet should be 100 mm
wide and pasted to each
other with bitumen @ 1.7 kg/sqm).
The rate includes preparation of surface, treatment
and sealing of all joints, corners, junctions of pipes
and masonry with polymer mixed slurry.
sqm 105 505.90 53,120
10.2 22.700
Providing and laying integral cement based water
proofing treatment including preparation of surface
as required for treatment of roofs, balconies, terraces
etc consisting of following operations: a) Applying a
slurry coat of neat cement using 2.75 kg/sqm admixed
with water proofing compound conforming to IS :
2645 and approved by Engineer-in-charge including
laying glass fibre cloth of approved quality in top layer
of plaster and finally finishing the surface with trowel
with neat cement slurry and making pattern of
300x300 mm square 3 mm deep. e) The whole terrace
so finished shall be flooded with water for a minimum
period of two weeks for curing and for final test. All
above operations to be done in order and as directed
and specified by the Engineer-in-Charge :
10.3 22.170
Providing and laying in situr seven course water
proofing treatmen with APP (Atactic Polypropylene)
modified Polymeric membrane over roof consisiting
of first coat of bitument primer @0.40 kg per sq.mt,
wnd, 4th and 6th courses of bonding material
@1.20kg/sqm, which shall consist of blown type
bitumen of grade 85/25 conforming to IS:702, 3rd and
5th layers of roofing membrance APP modified
Polymeric membrane 2.0 mm thick of 3.00 kg/sq.mt
weight consisting of five layers prefabricated with
centre core as 100 micron HMHDPE film sandwiched
on both sides with polymeric mix and the
polymeric mix and the polymeric mix is protected on
both side with 20 micron HMHDPE film. 7th the top
most layer shall be finished with brick tiles of class
designation 10 grouted with cemen mortar 1:3 (1
cement:3 fine sand) mixed with 2 per cent integral
water proofing compound by weight of cemen over a
12 mm layer of cemen mortar 1:3 (1 cement:3 fine
sand) and finished neat (item of laying brick tiles shall
be papid for separately)
Sqm 253 518.40 1,31,155
Subtotal 1,84,275
Sign and stamp of EPIL 9 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
11.0 STEEL REINFORCEMENT
11.1 5.220
Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position
and binding all complete upto plinth level.
11.2 5.22A.6 Thermo-Mechanically Treated bars Kg. 79421 56.60 44,95,229
11.3 9.48 M.S. GRILL
Providing and fixing M.S. grills of required pattern in
frames of windows etc. with M.S. flats, square or
round bars etc. including priming coat with approved
steel primer all complete.
Fixed to steel windows by welding kg 1452 104.65 1,51,952
Subtotal 4647180.4
2,18,25,989
13.0 ELECTRICAL BOQs
LIGHT FIXTURES
13.1
SOR 2012-13.
(ITEM NO 5-1-
6)
Providing & erecting Approved make Power Saving 50
Watt 1200mm dia Ceiling Fan with double ball bearing
ISI mark with Condenser 230 volt A.C. 50 Hz 1200
mm sweep complete having 3blades with aluminium
blades with , canopy & 30 cms. down rod erected
with 24/ 0.2, 3 core flexible wire with earthing.(Make
shall be approved by Engineer in charge))
Nos 51 2070.00 1,05,570
13.2
SOR 2012-13.
(ITEM NO 5-2-
3)
Supplying & erecting fan hook box of 10 mm M.S.
round bar bounded to the RCC bars up to 50mm
length each side and pierced through a 16 Gauge M.S.
box / Heavy Duty PVC box complete erected
concealed in Ceiling with necessary finishing.
Nos 51 125.00 6,375
13.3
SOR 2012-13.
(ITEM NO 5-2-
5)
Providing 2.5mm.thick laminated acrylic sheet to
cover the fan hook or Fan box.Nos 51 20.00 1,020
13.4
SOR 2012-13.
(ITEM NO 5-2-
1)
Supplying and erecting 19 / 20 mm. nominal bore
Medium Class M.S. Pipe down rod erected duly
painted for fan complete with necessary 24/ O.20, 3
core flexible wire with earthing.
Mtr 48 125.00 6,000
13.5
SOR 2012-13.
(ITEM NO.5-3-
4-A)
Supplying and erecting approved make exhaust fan
having size 305mm, 900 RPM. CAT IINos 18 2400.00 43,200
13.6
SOR 2012-13.
(ITEM NO.5-3-
5)
Providing suitable M.S.louver shutter of the Exhaust
Fan.Nos 18 430.00 7,740
13.7
SOR 2012-13.
(ITEM NO.5-3-
8)
Providing recess in window frame covering the rei-
naining portion of window frame with 15 mm thick
plywood and colour washing to match the colour of
the wall.
Nos 18 200.00 3,600
Total for Light Fixtures 1,73,505
14 INTERNAL WIRING
Civil works Total
Sign and stamp of EPIL 10 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
14.1
SOR 2012-13.
(ITEM NO 1-2-
1.)
Point wiring for Light / Bell with 2-1.5 sq.mm &
earthwire of
1.5 sq.mm (Green) both are of ISI marked 1.1 KV
grade FRLS PVC insulated multistrand copper wires, in
following type of pipe to be erected concealed in/ on
surface on wall/ceiling complete with 6A Modular
type switch / bell push & accessories and earth
continuity of following type, erected on PVC / Metallic
box, single mounting base frame covered with
textured/metallic front plate modules erected on / in
wall / ceiling as per pipe erected, with necessary
Lamp holder/ceiling rose / H.D.Connector as directed.
(a) with medium class Rigid PVC pipe and accessories.
Cat. III
Pt. 200 420.00 84,000
14.2
SOR 2012-13.
(ITEM NO 1-1-
4.)
Point wiring for secondary light point with 2-1.5
sq.mm & earthwire of 1.5 sq.mm (green) both are of
ISI marked 1.1 KV grade FRLS PVC insulated
multistrand copper wires, in following type of pipe to
be erected concealed in / flushed on wall/ceiling,
complete with earth continuity and necessary
connection with primary light with accessories
erected on Metal / PVC box covered with 3 mm thick
PC(Polycarbonet) / Acrylic sheet for open / concealed
wiring. with necessary Lamp holder / ceiling rose /
H.D.Connector as directed.(a) with medium class Rigid
PVC pipe and accessories
Pt. 86 100.00 8,600
14.3
SOR 2012-13.
(ITEM NO 1-2-
2.)
Point wiring for FAN with 2-1.5 sq.mm & earthwire of
1.5 sq.mm (Green) both are of .ISI marked 1.1 KV
Grade FRLS PVC insulated multistrand copper wires, in
following type of pipe to be erected concealed in /
flushed on wall/ceiling complete with 6A Modular
type switch and hum free EME four or more step type
electronic fan regulator with separately mounted and
accessories with earth continuity of following type
erected on PVC / Metallic box, single mounting base
frame covered with textured/metallic front plate
modules erected on / in wall / ceiling as per pipe
erected. with necessary ceiling rose / H.D.Connector
as directed. (a) with medium class Rigid PVC pipe and
accessories. Cat. III
Pt. 51 600.00 30,600
14.4
SOR 2012-13.
(ITEM NO 1-2-
4.)
Point wiring for Looped Plug with 6A Modular type
switch & 5 pin socket erected on PVC / Metallic box,
single mounting base frame covered with textured /
metallic front plate modules erected on / in wall /
ceiling with following type accessories. Cat. III
Pt. 28 240.00 6,720
14.5
SOR 2012-13.
(ITEM NO 1-2-
6)
Providing following type of Modular Type Accessories
mounted with pvc / metallic box, single mounting
base frame covered with textured / metallic front
plate , modules erected with necessary connection.
As desired by Engineer In charge (1)One No. SP 6
Amp. (2) One No 5 pin plug
Nos 6 300.00 1,800
14.6
SOR 2012-13.
(ITEM NO 1-4-
1)
Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following
type of pipe to be erected concealed in /flushed on
wall/ceiling, with 1.5 sq. mm copper conductor FRLS
PVC insulated stranded wire of green colour for earth
continuity of following size (a) with medium class
Rigid PVC pipe and accessories. Cat. III (b) 2 wire
2.5 sq. mm
Rmt. 3300 80.00 2,64,000
Sign and stamp of EPIL 11 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
14.7
SOR 2012-13.
(ITEM NO 1-2-
6)
Providing following type of Modular Type Accessories
mounted with pvc / metallic box, single mounting
base frame covered with textured / metallic front
plate , modules erected with necessary connection.
As desired by Engineer In charge
(9) 16 Amp. SP one way switch (10) 6/16Amp.
Universal socket
Nos 26 380.00 9,880
14.8
SOR 2012-13.
(ITEM NO 1-4-
2)
Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following
type of pipe to be erected in / on wall / ceiling with
2.5 sq. mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of
following size (a) with medium class Rigid PVC pipe
and accessories (a) 2 wire 4 sq. mm
Rmt. 1320 110.00 1,45,200
TOTAL FOR INTERNAL WIRING 5,50,800
15 COMPUTER WIRING
15.1
SOR 2012-13.
(ITEM NO 1-6-
2-B)
Providing & erecting Switch board for Computer or
electric apparatus consisting of following items in
single board erected on PVC / Metal board with 3 mm
thick PC (Polycarbonate) / Acrylic sheet erected as
directed
1 no. 6A/16A universal plug-switch combined. 1 nos.
16A Switch
2 nos. 6A 5 pin Plug [B] For Modular Type Accessories
CAT III
Nos 53 1140 60,420
TOTAL FOR COMPUTER WIRING 60,420
16 DB's/FLOOR PANEL
Supply,Installation, testing and commissioning of
Panel Board as per IS , Technical Specifications &
respective drawings. The unit rate for each item shall
include Supply & delivery of the panels at the site.
Shifting of panels from site store to the suitable
location.(If applicable) Installation of panel in Electric
room or Location suggested by client within campus
including removing packing. Earthing all components,
frame etc. to a common internal earth bar. Supply &
fixing all accessories and supporting structure. Supply
and fixing of M.S. 100 mm. channels for fixing the
panels connection, testing & commissioning. The
panels shall be compatible to BMS whereever shown
in the SLD. Checking of Internal connection and
wiring, operation of switches, starter, MCCB, MCB,
relays, contactors etc.
Supply of necessary tools, hardware, testing
hardware, testing equipment etc. Electrical contractor
shall carry out the insulation test at site & all the
readings shall be submitted in duplicate to the
consultant or engineer-in- charge.
16.1
SOR BASED
RATE
ANALYSIS-2
Supply, Installation, Testing & Commissioning of
Ground Floor Main LT Panel-2 as per Description
Below.
Nos 1 117000.00 1,17,000
Incomer : 160A Four Pole MCCB, Thermal Magnetic
Release, S/C, E/F, O/C, 50Hz, 25KA
Busbar Size : 160A TPN Al., with Insulation Strip, 415V,
50Hz, 25KA Withstanding for 1 Sec
Outgoing :
1) 40/63A FP MCB, 10KA - 10 Nos C curve
Sign and stamp of EPIL 12 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
2) 63A FP MCCB, 25KA - 2 Nos
16.2
SOR BASED
RATE
ANALYSIS-3
Supply, Installation, Testing & Commissioning of
Utility Panel as per Description Below.EACH 1 54000.00 54,000
Incomer : 63A Four Pole MCCB, Thermal Magnetic
Release, 25KA
Busbar Size : 63A TPN Al. with Insulation Strip, 415V,
50Hz, 25KA Withstanding for 1 Sec
Outgoing :
1) 40A FP MCB, 10KA - 4 Nos C curve
2) 32A DP MCB, 10KA - 2 Nos B curve
16.3
SOR BASED
RATE
ANALYSIS-6
8 Way SS Double Door Three Phase DB EACH 11 15000.00 1,65,000
Incomer : 40/63 A FP MCB. 10KA
ELCB : 3 nos of 32/40 A DP ELCB, 30 mA
Outgoing : 18 nos of 6/10/16/20A SP MCB, 10KA
16.4
SOR BASED
RATE
ANALYSIS-5
Supply, Installation, Testing & Commissioning of
Single Phase Distribution Box as per description
below, Specification, Technical Data sheet & IS.
EACH 1 5000.00 5,000
6 Way SS Single Door Type Distribution Box
Incomer : 40A DP ELMCB, 30 Ma
Outgoing : 6 nos of 6/10/16/20A SP MCB, 10KA
Total for DB's 341000
17 LT CABLES AND TERMINATIONS
17.1
SOR 2012-13.
(ITEM NO 4-3-
3-)
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
for 1.1 KV. to be laid on wall with necessary clamps
or in existing trench / pipe of following size of
cables (E) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2
core)
Mtr 110 660.00 72,600
17.2
SOR 2012-13.
(ITEM NO 4-3-
3-)
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
for 1.1 KV. to be laid on wall with necessary clamps
or in existing trench / pipe of following size of
cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2
core)
Mtr 17 220.00 3,740
17.3
SOR 2012-13.
(ITEM NO 4-3-
4-)
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
for 1.1 KV. to be laid on wall with necessary clamps
or in existing trench / pipe of following size of
cables (d) 4 core 16 Sq. mm
Mtr 88 180.00 15,840
17.4
SOR 2012-13.
(ITEM NO 4-6-
3)
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables.(E)
3.5 core 120 Sq. mm
Ea 2 150.00 300
17.5
SOR 2012-13.
(ITEM NO 4-6-
3)
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables.(A) 4
core 25 Sq. mm
Ea 2 70.00 140
17.6
SOR 2012-13.
(ITEM NO 4-6-
1)
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables.(E) 4
core 16 Sq. mm
Ea 4 50.00 200
17.7
SOR 2012-13.
(ITEM NO 4-7-
1)
Solderless crimping type Aluminium lugs
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool &
connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved
manner. (H) 120 Sq.mm.
Ea 9 45.00 405
Sign and stamp of EPIL 13 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
17.8
SOR 2012-13.
(ITEM NO 4-7-
1)
Solderless crimping type Aluminium lugs
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool &
connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved
manner. (D) 25 Sq.mm.
Ea 9 15.00 135
17.9
SOR 2012-13.
(ITEM NO 4-7-
1)
Solderless crimping type Aluminium lugs
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool &
connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved
manner. (C) 25 Sq.mm.
Ea 18 15.00 270
Total for LT cables 93630
18 DATA CABLE
18.1
SOR 2012-13.
(ITEM NO 1-4-
8-C)
Supplying & erecting approved make LAN cable of
following size in existing pipe as per direction CAT - 6
CABLE with Medium class RIGID PVC PIPES of
following size complete to be erected on/in wall or
ceiling erected with necessary PVC fittings & Junction
boxes fixed with adhesive solution & Clamps with
following dia of pipes, in approved manner as
directed 25 mm DIA CONDUIT
Rmt. 1320 50.00 66,000
18.2
SOR 2012-13.
(ITEM NO 1-3-
2-B)
Providing and erecting ISI mark Medium class RIGID
PVC PIPES of following size complete to be erected
on/in wall or ceiling erected with necessary PVC
fittings & Junction boxes fixed with adhesive solution
& Clamps with following dia of pipes, in approved
manner as directed 25 mm DIA CONDUIT
Rmt. 1320 32.00 42,240
Total for Data cables 1,08,240
19 EARTHING
19.1
SOR 2012-13.
(ITEM NO. 3-
14-10-C)
Supplying & erecting in earthpit of minimum bore dia.
225mm size ASH or approved make Safe Earthing
Electrode consisting Pipe-in-Pipe Technology as per IS
3043-1987 made of corrosion free G.I.Pipes having
Outer pipe dia of 80 mm having 80-200 Micron
galvanising, Inner pipe dia of 40 mm having 200-250
Micron galvanising, connection terminal dia of 14 mm
with constant ohmic value surrounded by highly
conductive compound with high charge dissipation
suitable for following type of applications. [C] For
Electrical Installation covering Transformer Neutrals,
Lightning arrester Earthing, A.C.Plant & Sensitive
Computer System(like Automation, SCADA)i.e.
independent Earthing located in other than normal
soil i.e. Soft Rock, Marshy Soil etc..
-Length of Pipe : 3 Mtrs.
-Back filling Compound :2 nos Bags of 25 Kg.
NOS 2 16500.00 33,000
19.2SOR 2012-13.
(ITEM NO. 3-
Supply and laying of Earthing Conductor Providing
and erecting HOT Deep Galvanised Strip iron wire 8
to 16 S.W.G.
KG 28 90.00 2,520
19.3
SOR 2012-13.
(ITEM NO. 3-
14-2)
Supply,laying and jointing of 25 X 6 MM GI Strip KG 33 90.00 2,970
Total for Earthing 38,490
13,66,085
20.0 Plumbing BOQs
Subtotal Electrical
Sign and stamp of EPIL 14 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
21.0SOR 2015-16
Item No -00
COLD / HOT /DRINKING WATER SUPPLY:
INTERNAL/EXTERNAL WATER SUPPLY WORK:-
Providing,laying and jointing in true line and level
U.P.V.C pipe (SCH-40) of following dia. Including
fittings of standard make as approved by engineer-in-
charge. Pipe shall be fixed on the wall with the help of
clamp at every 2000 mm center to center or shall be
concealed as directed including necessary fittings etc.
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
a) 15 mm
Rmt 29 84.90 2,462
b) 25 mm Rmt 55 107.00 5,885
c) 32 mm Rmt 18 139.00 2,502
d) 40 mm Rmt 26 173.00 4,498
E) 50 mm Rmt 0 229.00 0
21.2
ELECTRICAL
SOR 2012-13
ITEM NO. 8-
11-8
Supplying & erecting resin bonded flap rock wool /
glass wool with conductivity value 1.67 sq.mm per
watt & to with stand the temp. to 100 degree
centigrade C thickness 50mm with G I pipe of
following size dia "B" class as per IS:1239. The plastic
sheet to be used as covering of glass wool. Al. cladiy
besides other materials like chicken mesh, 26 G Al.
Sheet shall be used for cladding the insulation pipe.
[A] 20 mm NB pipe
Rmt 0 360.00 0
[B] 25 mm NB pipe Rmt 22 440.00 9,680
[C] 32 mm NB pipe Rmt 0 530.00 0
[D] 40 mm NB pipe Rmt 0 620.00 0
21.3ITEM CODE
23067
Providing and Laying & Jointing in true line level 110
diameter U.P.V.C (Type'B') conforming to IS13592-
1992 with one end plain and other end socketed with
rubber ring, and fittings conforming to ISI 14735-1999
of approved make for drinage system pipe line, pipe
shall be jointed with each other with rubber
lubricant,pipe shall be fixed on wall using of PVC
clamp of the size 110 mm diametre x210 mm length x
196 mm height at every 2000 mm center to center or
shall be concealed in walls as directed including
testing of pipes and joints and jointed with adhesive
solvant cement including cost of all materials.
(i) 110 mm Dia(DOWNTAKE FOR SOIL WATER AND
RAIN WATER)
Rmt 78 1160.00 90,480
21.4ITEM CODE
23066
Providing and Laying & Jointing in true line level 110
diameter U.P.V.C (Type'B') conforming to IS13592-
1992 with one end plain and other end socketed with
rubber ring, and fittings conforming to ISI 14735-1999
of approved make for drinage system pipe line, pipe
shall be jointed with each other with rubber
lubricant,pipe shall be fixed on wall using of PVC
clamp of the size 110 mm diametre x210 mm length x
196 mm height at every 2000 mm center to center or
shall be concealed in walls as directed including
testing of pipes and joints and jointed with adhesive
solvant cement including cost of all materials.
(iii) 160 mm Dia(DOWNTAKE FOR SOIL WATER AND
RAIN WATER)
Rmt 18 918.00 16,524
21.5Providing & fixing in position cowl vent to pipes
a) 75 mm diaEach 6 431.00 2,586
21.5.1 100 mm dia Each 2 496.00 992
ITEM CODE
23006C
Sign and stamp of EPIL 15 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
21.6 SOR ITEM
NO.23068
Providing and fixing PVC SWR Nahni trap IS 14735
for drain - 100 mm diameter with jali of the following
nominal diameter of self cleansing design with C.I.
scread down or hinged grating including the cost of
cutting and making good the walls
Each 47 439.00 20,633
21.7
SOR 2015-16
Item No -
23.112
Providing and fixing wash down water closet
(European type, WC pan) with integral S trap
including jointing the trap with soil pipe in cement
mortar 1:1 (1 Cement : 1 fine sand) ( Seal and cover to
be measured and paid for separately) A) vitrious
china white colour
(Cera-2008B / Parryware-C0287 / Hindware- 20011)
Each 19 881.00 16,739
21.8P & F Flush Cock / Flush Valve (IS : 9758 Mark) for
WC of approved quality make :
` CP brass push type 15mm nominal bore.
(-do-) 20mm nominal bore.
(-do-)exposed 25mm nominal bore.
(-do-) 32mm nominal bore.
(-do-) concealed 25mm nominal bore.
M133 (-do-) concealed 32mm nominal bore. Each 19 276.00 5,244
21.9
SOR 2015-16
Item No -
23.121
Providing and fixing plastic seat and cover for wash
down water closet with C.P. brass hinges and rubber
buffers A) Black plastic seat and cover (Cera-2308 /
Parryware-C8071 / Hindware- 20011)
Each 19 340.00 6,460
21.10 SOR 2015-16 Providing and fixing rubber plug for sink or wash Each 13 20.00 260
21.11
SOR 2015-16
Item No -
23.136
Providing and fixing M.I. fisher union for wash basin
or sink.
(A) 32 mm dia.
Each 13 86.50 1,125
21.12
SOR 2015-16
Item No -
23.143
Providing and fixing 600mmX450mm bevelled edge
mirror of superior glass mounted on 6mm thick A.C.
sheet or plywood sheet and fixing to wooden plug
with C.P. brass screws and washers.
Each 13 580.00 7,540
21.13
SOR 2015-16
Item No -
23.146
Providing and fixing toilet paper holder
(A) C.P. Brass
(Cera- / Parryware- / Hindware)
Each 19 255.00 4,845
21.14
SOR 2015-16
Item No -
23.122
Providing and Fixing Urinal of approved quality
including connecting the Urinal with waste pipe, tap
etc. completed.
[A] White earthenware flat back or corner type size
430mmX 260mm X 350mm
(Cera-5001 / Parryware-C0501 / Hindware- 60005)
Each 0 656.00 0
21.15ITEM CODE
22014
Providing erecting and fixing double coated sintex or
equivalent PVC.(ISI) water tank of required capacity
each with all necessary fittings and connection etc.
complete on terrace.
Liter 5500 4.60 25,300
21.16SOR 2015-16
Item No - 0.0
Providing and fixing ball cock of approved quality as
directed
(I)40 mm dia
Each 0 261.00 0
21.17SOR 2013-14
Item No - 0.0
Providing and fixing ball cock of approved quality as
directed
(II)32 mm dia
Each 9 261.00 2,349
21.18SOR 2015-16
Item No - 0.0
Providing and fixing ball cock of approved quality as
directed
(III)25 mm dia
Each 6 155.00 930
Sign and stamp of EPIL 16 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
21.19Item code -
23067
Providing and Laying & Jointing in true line level
Following diameter U.P.V.C (Type'B') conforming to
IS13592-1992 with one end plain and other end
socketed with rubber ring, and fittings conforming to
ISI 14735-1999 of approved make for drinage system
pipe line, pipe shall be jointed with each other with
rubber lubricant,pipe shall be fixed on wall using of
PVC clamp of the size 160 mm diametre x210 mm
length x 196 mm height at every 2000 mm center to
center or shall be concealed in walls as directed
including testing of pipes and joints and jointed with
adhesive solvant cement including cost of all
materials. (i) 110 mm dia.
Rmt 88 1160.00 1,02,080
ITEM CODE-
23066[ii] 160 mmDia. Rmt 55 918.00 50,490
21.20
SOR 2013-14
Item No -
24..2
Providing and laying Cement concrete 1:5:10 (1-
Cement : 5 - fine sand : 10-Graded stone aggregate
40mm nominal size) bedding for stoneware pipes of
following internal diameters with necessary formwork
and curing complete.
[A] 100mm dia. (112 mm Ave. bed thickness)
Rmt 88 93.20 8,202
[B] 150mm dia. (166mm Ave. bed thickness) Rmt 55 156.00 8,580
21.21
SOR 2013-14
Item No -
24.19
Providing and fixing S.W. gully trap with C.I. grating
brick masonry chamber and water tight C.I. cover
with frame of 300mmX300mm size (inside) with
standard weight. I) Square mouth traps.
a) 100mmX100mm size P type
Each 4 1242.00 4,968
Constructing Manhole with R.C.C. top slab in 1:2:4
mix (1-cement : 2-coarse send : 4-graded stone
aggregate 20mm nominal size) foundation concrete
1:3:6 mix (1-cement : 3-coarse sand : 6- Brick bats 40
+ 50mm size) inside plastering 15mm thick with
Cement a) With 230mm thick walls of brick masonary
using brick having
crushing strength not less than 35Kg. / Sq.cm. in
Cement Mortar 1:5 (1- Cement : 5- Coarse sand) (I)
Inside size 900mm X 1200mm and 1.5M. deep
including C.I. cover with frame size 560mm diameter
total weight of cover and frame to be not less than
128 kgs. (Wt. of cover 64 kg. and Wt. of frame 64 Kg.)
1) A type depth 0.90 Meter for 150 mm diameter
sewer.
Each 4 9844 39,376
2) B type depth 1.5 Meter for 150 mm diameter
sewer.Each 1 17730.00 17,730
3) B type depth 2.24 Meter for 150 mm diameter
sewer.Each 0 20639.00 0
Providing & Laying ( to level or Slope) and Rmt 11 401.00 4,411
[C]300 mm dia Rmt 0 514.00 0
21.24
ELECTRIC AL
SOR 2012-13
ITEM NO. 9-4-
2 (F)
For 5 HP 3 phase open well horizontal mono block
pump set suitable for 150 LPM to 500 LPM @ 15 to 30
Mtr head. CAT-II (1W +1S) with necessary valve
fittings.
Each 1 54650.00 54,650
21.22SOR Item No -
24.27
21.23SOR 2015-16
Item No -
Sign and stamp of EPIL 17 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
21.25
ELECTRIC AL
SOR 2012-13
ITEM NO. 9-5-
6 (B)
Supplying and erecting approved make3 phase motor
control panel (ATS) made from 16 G. CRCA sheet duly
painted with epoxy power paint inside and outside
with hinged doors and locking arrangement,
consisting, of suitable switch of AC 23 duty with HRC
fuses (Cat.III), starting and running contactors,
overload relay, Automatic water level controller,
Electronic timer with master timer CT operated
Ammeter with selector switch, Voltmeter with
selector switch, phase indicating lamps, single phasing
preventer , water level guard, over load, start, run
and stop push buttons, air cooled auto transformer
with 60%, 70%, 80% tapping, Panel to be erected on
angle iron frame grouted on wall as directed.,
contactors relays, timer etc. shall be of L & T Siemens
/ Cutler Hammer make.
(b) Suitable for 5 H.P.
Each 1 40250.00 40,250
21.26
ELECTRIC AL
SOR 2012-13
ITEM NO.
8-8-2
Providing & erecting water cooler having storage
capacity 150 Ltr. & cooling capacity 80 Ltr.per hour @
an ambient temp of 45 deg C. The outlet temp. of the
water should drop by 15 deg C within a hour, The
water cooler should be comprising of hermetically
sealed compressor, fan motor, condensing unit, water
tank surrounded by evaporating, coil, thermostats,
relay etc.complete with necessary inlet & outlet
connection. The body of water cooler will be made
from Stainless Steel.
Each 1 54000.00 54,000
21.27
ELECTRIC AL
SOR 2012-13
ITEM NO.
8-8-6
Supplying & erecting 5 stage single reverse
osmosis(R.O.) water purification system with M.S.
powder coated frame, prefilter housing with 'O' ring
presediment filter GAC filter, carbon filter suitable
buster DC pump capacity 80 psi, mention with 40 Osg
inline type post carbon filter auto low & high pressure
switches with following size of storage tank & LPH
capacity & erected as directed with one year
comprehensive maintenance guarantee.
[C] 50 Ltr / Hr with 250 psi 2 nos booster pump
Each 1 27000.00 27,000
6,38,770
Grand Total Part - 1 2,38,30,844
1.0 EXPOSED BRICK WORK
1.1
Brick work with common burnt clay machine moulded
modular bricks of class designation 12.5 in exposed
brick work including raking horizontal and vertical
grooves 10 mm wide 12 mm deep complete in
cement mortar 1:6 (1 cement : 6 coarse sand) whilst
the mortar is green in bond pattern as specified. The
mortar to be pressed with special steel trowels. The
joints of the pointed work shall be neat. The lines will
be regular and uniform in breadth and the joints shall
be raised, flat, sunk or 'V' shaped as directed. No false
joints allowed.
sq.mt
s.578 3300.00 19,07,400
1.2Waterproofing coating on brick cladding to prevent
efflorescence (Dr.Fixit or equivalent)sq.mt 578 120.00 69,360
Subtotal 19,76,760.00
BOQ for CIVIL WORKS, ELECTRICAL WORKS and PLUMBING WORKS based on Non DSR
Subtotal Plumbing
Sign and stamp of EPIL 18 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
2.0 EXPOSED CONCRETE WORK
FORMWORK
2.1Walls (any thickness) including attached pilasters,
buttresses, plinth and string courses etc.Sqm 400 650.00 2,60,000
2.3Lintels, beams, plinth beams, girders, bressumers and
cantilevers.Sqm 200 650.00 1,30,000
2.4Columns, Pillars, Piers, Piers, Abutments, Posts and
Struts.Sqm 250 650.00 1,62,500
2.5 Stairs (excluding landings) except spiral stair-cases Sqm 66 650.00 42,900
2.6 Edges of slabs and breaks in floors and walls.
Below 20 cm wide rmt 550 130.00 71,500
Subtotal 6,66,900.00
3.0 MISCELLENEOUS
MOSQUITO SCREEN FOR WINDOWS
Fixing sliding mosquito nets with aluminium section
frames 2.5mm thick and Saint Gobain or equivalent
fiber net with roller mechanism for all windows and
ventilators
sqm 61 2250.00 1,37,250
3.1Anodised aluminium fixed louvered screens for the
duct shafts
Aluminum plain panels with finish of powder coating
on the visible surface of approved colour and
supporting structure black colour spray painted
(Supersil or equivalent make)
sqm 110 2200.00 2,42,000
3.2 FLUSH DOORS (FOR TOILET)
30mm thick pine frame pine filler doors
PF bonded resin waterproof ISI brand with 1.00
mm thick super gloss laminate on both sides and
teak wood borders on the shutters on all four sides
sqm 66 2400 1,58,400
3.3
Supplying and filling in plinth with river sand
under floors, including watering, ramming,
consolidating and dressing complete.
cum 114 800.00 91,200
3.4
Providing and fixing 18mm thick kota stone gang saw
cut, mirror polished, pre moulded and pre polished,
machine cut for shelves and counters of required size,
approved shade and colour and texture laid over
20mm thick base cement mortar 1:4 (1 cement: 4
coarse sand) joints treated with white cement, mixed
with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing edges to give
high gloss finish etc. complete at all levels
sqm 36 3746.00 1,34,856
Subtotal 7,63,706.00
4.0 CCTV
Supplying, testing, installation and commissioning of
IP based CCTV system for building security comprising
of PTZ, fixed camera, cabling, recording, display
system and hardware and software support Including
one Computer at Reception
LS 75,000.00
5.0 PLUMBING WORK
Sign and stamp of EPIL 19 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
5.1
Providing and Laying & Jointing in true line level 75
diameter U.P.V.C (Type'B') conforming to IS13592-
1992 with one end plain and other end socketed with
rubber ring, and fittings conforming to ISI 14735-1999
of approved make for drinage system pipe line, pipe
shall be jointed with each other with rubber
lubricant,pipe shall be fixed on wall using of PVC
clamp of the size 75 mm diametre x210 mm length x
196 mm height at every 2000 mm center to center or
shall be concealed in walls as directed including
testing of pipes and joints and jointed with adhesive
solvant cement including cost of all materials.
(i) 75 mm Dia(DOWNTAKE FOR SOIL WATER AND
RAIN WATER)
Rmt 164 350.00 57,400
5.2
Providing and fixing C.P Health Faucet with 1 meter
flexible pipe and wall hook approved make. The
fixing include drilling & installation of wooden plug
with C.P. brass screw with making the wall good with
finishes as per instruction of Engg. In charge etc.
complete.
(Cera-CG205/ Parryware-T9937A1 / Hindware-
F160027)
Each 19 435.00 8,265
5.3
Providing and fixing Angle Cock with screw, back
nuts all necessary fittings etc. Completed
(Cera-CM108/ Parryware-T9939A1 / Hindware-
F100043)
Each 13 476.00 6,188
5.4
Providing and fixing 32 mm dia C.P. brass waste for
wash basin or sink.
(Cera- / Parryware-T9911A1 / Hindware-)
Each 13 180.00 2,340
5.5
Providing and fixing Chromium plated bottle trap with
necessary coupling of approved quality for wash
basin.
(Cera-CM104 / Parryware-T3201A1 / Hindware-
E850015)
Each 13 891.00 11,583
5.6
Supply installation testing and commisioning of HAND
OPERATED 1.1 LITER CAPACITY soap dispenser, Push-
Button type, White/smoked. Cover in ABS
Thermoplastic body. (Cera-CA211 / Parryware-
T3201A1 / Hindware)
Each 13 1285.00 16,705
5.7
Providing and fixing CP brass towel rail complete with
C.P. brass brackets fix to wooden plug with CP brass
screws. I) 600 mm X 20 mm
(Cera-CA303 / Parryware-T6001A1 / Hindware-
F880005)
Each 11 900.00 9,900
5.8
Providing and fixing of screwed down bib taps of
following size
(A) Brass chromium plated screw down bib tap of
20mm (Cera-CC103 / Parryware-T3504A1 / Hindware-
F200003)
Each 58 608.00 35,264
5.9
Providing and fixing C.P. brass overhead shower with
15 mm or 20 mm inlet Arm
(A)100 mm dia.
(Cera-CH102,CG416A/Parryware-
G0132A1,T9901A1/Hindware-F160039)
Each 18 845.00 15,210
5.10
Providing and fixing concealed Stop cock for
overhead shower consisting of fitting sleeve,
operating lever and adjustable wall flange of
approved quality and of 1/2" size as directed below
(Cera-CC127 / Parryware- / Hindware)
Each 18 860.00 15,480
5.11
Providing and fixing pillar tap capstan head screw
down high pressure with screw and back nuts of
(I)15mm Dia.
(Cera-CC101 / Parryware-T3501A1 / Hindware-
F200001)
Each 13 608.00 7,904
Sign and stamp of EPIL 20 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
5.12
Providing and fixing counter wash basin with single
hole for pillar trap with CI or MS brackets painted
white including cutting holes and making good the
same but excluding fitting in white colour (Cera,
Parryware, Hindware or equivalent)
Each 14 4750.00 66,500
5.13 P-Trap Each 32 1137.00 36,384
Subtotal plumbing Non DSR 2,89,123.00
6.0 Electrical Work
LIGHT FIXTURES
6.1
Supply, Installation, Assembling, Testing &
Commissioning of 18W T-5 LED Wall/Surface mounted
complete with driver and LED suitable for
100w/Lumerns with all necessary accessories to
complete the installation Satisfactorily.
Nos 123 1300.00 1,59,900
6.2
Supply, Installation, Assembling, Testing &
Commissioning of 9W LED Bracket light Wall mounted
complete with driver and LED suitable for
100w/Lumerns with all necessary accessories to
complete the installation Satisfactorily.
Nos 89 1050.00 93,450
6.3
Supply, Installation, Assembling, Testing &
Commissioning of 14W LED Study (Mirror) light Wall
mounted complete with driver and LED suitable for
100w/Lumerns with all necessary accessories to
complete the installation Satisfactorily.
Nos 66 750.00 49,500
DATA CABLE
6.4
Supply and Installation of Layer 2/3 manageable
switch, 24 x 10/100Mbps 802.3a/f PoE ports, auto
MDI/MDX, auto-sensing, supporting minimum 2
nos. 1000Mbps Copper or ofc shared ports for
uplinks.
Nos 2 22100.00 44,200
6.5Supplying,installtion,testing & commsissioning of 6U
Network rack with base support.Each 1 5600.00 5,600
6.6
Supplying,installtion,testing & commsissioning of 2
Core OM3 Multimode Mode Fiber Armoured cable
complete with using Fusion splicing with pre-
terminated LC pigtails, dressing and proper fixing into
rolosplice trays and coupler as required complete
with termination.
Rmt 110 170.00 18,700
6.7
Supply, Installation, testing & commisioning of Wire
less WiFi Router with below specification Networking
Interface : (1) 10/100 Ethernet Port Buttons :
Reset Antennas : 2 Integrated (Supports 2x2 MIMO
with Spatial Diversity)Wi-Fi Standards : 802.11
b/g/n*Power Method : Passive Power over Ethernet
(12-24V) Power Supply : Included 24V, 0.5A PoE
Adapter Maximum Power Consumption : 6 W
Maximum TX Power : 27 dBm BSSID : Up to Four Per
Radio Power Save : Supported Wireless Security :
WEP, WPA- PSK, WPA-TKIP,WPA2 AES, 802.11i
Certifications : CE, FCC, IC Mounting : Wall/Ceiling
(Kits Included) Operating Temperature : 10 to 70° C
Operating Humidity : 5 - 80% Condensing Supported
:WMM, Voice, Video, Best Effort, and Background
'Concurrent Clients 50+ Supported Data Rates (Mbps)
Data Rates:802.11n, 6.5 Mbps to 300 Mbps (MCS0 -
MCS15, HT 20/40 802.11b, 1, 2, 5.5, 11 Mbps 802.11g,
6, 9, 12, 18, 24, 36, 48, 54 Mbps Frequency : 2.4 GHz
WITH SOTWARE FOR CONTROL
Each 20 6500.00 1,30,000
Sign and stamp of EPIL 21 Sign and stamp of Contractor
SR. NO.DSR 2016-
ITEM NO.DESCRIPTION UNIT QTY RATE AMOUNT
External Routing Network
6.8
Supply, Installation, Assembling, Testing &
Commissioning of 200mm Dia RCC Hume Pipe for
External Cable Laying
Rmt 55 145.00 7,975
6.9
Supply, Installation, Assembling, Testing &
Commissioning of 100mm Dia RCC Hume Pipe for
External Cable Laying
Rmt 55 205.00 11,275
6.10
Supply, Installation, Assembling, Testing &
Commissioning of 600mm x 600mm (Inner Size)x
1000mm deep Electrical Manhole with External wall
of 150mm Thick complete with required accessories
as per Structural Details
Each 4 1600.00 6,400
Subtotal Electrical Non DSR 5,27,000.00
Grand Total Part-2 42,98,489.00
GRAND TOTAL-PART-I+II 2,81,29,333.30
Sign and stamp of EPIL 22 Sign and stamp of Contractor