an extensive line of science-based solutions

residential . united states

www.insulateyourhome.comwww.dowsis.com

an extensive line of science-based solutions

For more than 60 years, The Dow Chemical Company has been a recognized leader in extruded polystyrene foam insulation. Since developing

STYROFOAM™ Brand Extruded Polystyrene Foam Insulation, Dow has continued to build on its foam expertise and technical strength to provide

its customers with the right thermal envelope product for just about any application. Today, the extensive line of science-based solutions from Dow

Building Solutions includes:

• STYROFOAM™ Brand Extruded Polystyrene Foam Insulation

• DowPolyisocyanurateInsulation

•STYROFOAM™ Brand Spray Polyurethane Foam (SPF) Insulation

• WEATHERMATE™Housewraps

• WEATHERMATE™ Construction Tape

• WEATHERMATE™ Straight and Flexible Flashings

• WEATHERMATE™ Sill Pan

• FROTH-PAK™FoamInsulationandFROTH-PAK™ Foam Sealant kits

• GREATSTUFFPRO™Gaps&CracksInsulatingFoamSealant

• GREATSTUFFPRO™Window&DoorInsulatingFoamSealant

• GREATSTUFFPRO™Wall&FloorAdhesive

•TILEBOND™ Roof Tile Adhesive

®™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow

the right products. based on building science.

Rigid Foam Insulation

Dow’s portfolio of rigid foam insulation products includes STYROFOAM™ Brand Extruded Polystyrene foam and Dow polyisocyanurate insulation. Proprietary manufacturing processes produce boards with uniform, closed-cell structures and high, stable R-values. STYROFOAM™ Brand Insulation products offer the highest moisture resistance of any foam plastic insulation available in the industry today. The reusable boards feature high compressive strength but are also lightweight and easy to cut to size. Dow polyisocyanurate insulation products feature insulation cores of thermoset foam plastic laminated to a variety of facers that enhance strength, moisture resistance and rigidity.

Spray Polyurethane Foam Insulation, Sealant and Adhesive Products

Dow polyurethane products offer dependable service in a wide variety of applications. The one- and two-component systems are specially formulated for each application. And they are compatible with most construction materials.

Spray Polyurethane Foam

STYROFOAM™ Brand Spray Polyurethane Foam (SPF) is a two-component, spray-applied insulation that expands during installation to create a seamless, monolithic barrier for protection against water and air. Offered in three formulations for both new and retrofit applications, STYROFOAM™ Brand SPF Insulation, when properly installed, is both a moisture-resistant air barrier and insulation, and provides structural reinforcement.

Weather Barrier Solutions

Make sure your homes are covered against air and moisture that can contribute to energy loss, compromise comfortandcausedamagewithWEATHERMATE™WeatherBarrier Solutions. STYROFOAM™ Brand Extruded Polystyrene Foam Insulation, polyisocyanurate insulations, WEATHERMATE™housewraps,flashings, sill pan and tape from Dow work together to create a complete exterior water management solution for comprehensive pro tection from the elements.

STYROFOAM™ Brand SPF Insulation provides structural enhancement only. Use in conjunction with approved structural components and framing members consistent with local building code requirements.

1

PRODUCTDESCRIPTION BUILDINGCODECOMPLIANCE

An extruded polystyrene foam insulation board with square edges on all four sides. Scored longitudinally on 16" and 24" centers, making it easy to snap into convenient widths.

Complies with ASTM C578 Type IV. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR-2142.ULClassified,seeClassificationCertificateD369. Calif. Std. Reg. # CA T064. Florida Building Code FL3835.

NOMINALBOARDTHICKNESS*,IN .75 1 1.5 2 2.5 3

R-VALUEAT75ºF 3.8 5.0 7.5 10.0 12.5 15.0

BOARD SIzE, FT 4 x 8

StyRoFoAm™ Brand ScoReBoARd™


An extruded polystyrene foam insulation board with plastic film on both sides. Recommended for wall sheathing in residential applications. Plastic film reduces job site damage.

Meets IBC/IRC requirements for foam plastic insulation. SeeICC-ESESR-2142.ULClassified,seeClassificationCertificate D369. Calif. Std. Reg. # CA T064. Florida BuildingCodeFL3835.

NOMINALBOARDTHICKNESS*,IN .5 .75 1

R-VALUEAT75ºF 3.0 4.0 5.0

BOARD SIzE, FT 4 x 8, 4 x 9, 4 x 10

StyRoFoAm™ Brand Residential Sheathing


An extruded polystyrene foam insulation board with dovetail grooves cut into one face of the board and shiplap edges on the long edges. Wheninstalledontheexteriorofbasementwalls,itprovidesinsulation,protects the waterproofing membrane and assists water drainage away from the foundation.

Complies with ASTM C578 Type IV. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR-2142.ULClassified,seeClassificationCertificateD369. Calif. Std. Reg. # CA T064. Florida Building Code FL3835.

StyRoFoAm™ Brand PeRImAte™

NOMINALBOARDTHICKNESS*,IN 1.063 2.125

R-VALUEAT75ºF 5.0 10.0



An extruded polystyrene foam board with proprietary extra-tough plastic film on both sides. Recommended for wall sheathing in residential applications. Very tough, durable performance reduces damage on the job site.

Meets IBC/IRC requirements for foam plastic insulation. SeeICC-ESESR-2142.ULClassified,seeClassificationCertificate D369. Calif. Std. Reg. # CA T064. Florida BuildingCodeFL3835.

NOMINALBOARDTHICKNESS*,IN .5

R-VALUEAT75ºF 3.0

BOARD SIzE, FT 4 x 8, 4 x 9

StyRoFoAm™ Brand dURAmAte™ Plus

*Note:Notallproductsandsizesareavailableinallpartsofthecountry.Otherproductsizesareavailableonamade-to-orderbasis.PleasecontactyourDowsalesrepresentativewithquestions.Note:Rmeansresistancetoheatflow.ThehighertheR-value,thegreatertheinsulatingpower.R-valuedeterminedbyASTMC518at75°Fmeantemperatureunlessotherwisespecified.

building envelope solutions

extruded Polystyrene Foam Insulation

2


An extruded polystyrene foam insulation board with tongue and groove edges on all four sides of 2' x 8' boards, 1" thick or less and on the long edges on all other boards.

Complies with ASTM C578 Type IV. Meets IBC/IRC requirements forfoamplasticinsulation.SeeICC-ESESR-2142.ULClassified,see Classification Certificate D369. Calif. Std. Reg. # CA T064. FloridaBuildingCodeFL3835.

NOMINALBOARDTHICKNESS*,IN .75 1 1.5 2

R-VALUEAT75ºF 3.8 5.0 7.5 10.0



An extruded polystyrene foam board with rabbet edges on long edges. Designed as a quick, easy option for insulating and finishing theinteriorofbasementwalls.Whenboardsarebuttedtogether, the rabbet edges form a slot between boards that accommodates a wood nailing strip. The wood nailing strip attaches the boards to the wall and provides a nail base for drywall.

Complies with ASTM C578 Type X. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR-2142.ULClassified,seeClassificationCertificateD369. Calif. Std. Reg. # CA T064. Florida Building CodeFL3835.

NOMINALBOARDTHICKNESS*,IN 1.5 2

R-VALUEAT75ºF 7.5 10.0



An extruded polystyrene foam insulation board with square edges on four sides. Offers exceptional water resistance, long-term thermal performance and high compressive strength.

Complies with ASTM C578 Type IV. Meets IBC/IRC requirements forfoamplasticinsulation.SeeICC-ESESR-2142.ULClassified,see Classification Certificate D369. Calif. Std. Reg. # CA T064. FloridaBuildingCodeFL3835.

StyRoFoAm™ Brand Square edge

NOMINALBOARDTHICKNESS*,IN .75 1 1.5 2 2.5 3 4

R-VALUEAT75ºF 3.8 5.0 7.5 10.0 12.5 15.0 20.0



A glass-fiber-reinforced polyisocyanurate foam core with solid aluminum foil facers on both sides. Can be installed exposed to the interior without a thermal barrier.

Complies with ASTM C1289 Type I, Class 2. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR-1659. FM 4880 – see Factory Mutual ApprovalGuide.Calif.Std.Reg.#CAT383.

tHeRmAX™ Sheathing

NOMINALBOARDTHICKNESS*,IN .5 .75 1 1.5 2

R-VALUEAT75ºF 3.3 5.0 6.5 9.8 13.0



extruded Polystyrene Foam Insulation

Polyisocyanurate Insulation

building envelope solutions

StyRoFoAm™ Brand tongue & Groove

StyRoFoAm™ Brand WAllmAte™

3


A high-performance polyisocyanurate foam core with three-ply poly/aluminum foil facers laminated to the core made via a patented process, resulting in durability. One facer is blue; the other facer is reflective foil.

Complies with ASTM C1289 Type I. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR-3089 Calif. Std. Reg. # CA T383.

Super tUFF-R™



BOARD SIzE, FT 4 x 8, 4 x 9, 4 x 10(1)

(1) Available in .5" and 1" only.

This product is not available in all areas. Please contact Dow for availability in your area.


Polyisocyanurate Insulation

building envelope solutions 4

Weather Barrier Solutions


A glass-fiber-reinforced polyisocyanurate foam core faced with nominal 1.25 mil embossed white acrylic-coated aluminum on one side and 0.9 mil smooth aluminum on the other. Can be installed exposed to the interior without a thermal barrier.

Complies with ASTM C1289 Type I, Class 2. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR-1659.FM4880–seeFactoryMutualApprovalGuide.Calif.Std. Reg. # CA T383.

tHeRmAX™ White Finish

NOMINALBOARDTHICKNESS*,IN .5 .75 1 1.5 2

R-VALUEAT75ºF 3.3 5.0 6.5 9.8 13.0



A flexible polyethylene foam gasketing strip used to reduce air infiltration between concrete foundation and sill plate or around windows.

Notapplicable.

StyRoFoAm™ Brand Sill Seal Foam Gasket

SOLDINROLLS* 3 1/2" x 50' 5 1/2" x 50' 7 1/2" x 50'


Woven,perforated,polyolefin-basedhousewrapthatisbothtoughandtear-resistant.Offers an effective option for builders who prefer to use housewrap as a secondary weather-resistive barrier. It is translucent to allow clear view of studs and sheathing surface. Can remain uncovered for up to 60 days.

Meets IBC/IRC requirements for a water-resistive barrier. See ICC ESR-2862.

WeAtHeRmAte™ Housewrap

SOLDINROLLS* 10' x 150' 9' x 100' 9' x 150' 9' x 195' 4'6" x 150' 3' x 100'


A non-woven, non-perforated, polyolefin-based housewrap. Offers an effective option for builders who prefer to use housewrap as a secondary weather-resistive barrier. It is translucent to allow clear view of application surface. Exceptional tear resistance and durability compared to other leading non-woven, non-perforated wraps. Can remain uncovered for up to 120 days.

Meets IBC/IRC requirements for a secondary water-resistive barrier. SeeICC-ESNER-640andICBO-ES ER-5937.

SOLDINROLLS* 10' x 100' 10' x 150' 9' x 100' 9' x 150' 3' x 100' 3' x 165'

WeAtHeRmAte™ Plus Housewrap


A high-performance polyisocyanurate foam core with reflective aluminum foil facers on both sides (one side reinforced).

Complies with ASTM C1289 Type I. Meets IBC/IRC requirements for foam plastic insulation. See ICC-ES ESR-3089 Calif. Std. Reg. # CA T383.

tUFF-R™




This product is not available in all areas. Please contact Dow for availability in your area.


Strong,pliable,highlyadhesivetapesealsjointsandseamsofWEATHERMATE™andWEATHERMATE™PlushousewrapsandSTYROFOAM™BrandInsulatedSheathings.OrientedpolypropylenebackingformulatedwithUV-treatedfilmhelpsresistdegradationfrom exposure to sunlight.

Complies with ASTM D3330 and ASTM D882.

*Note:Notallproductsandsizesareavailableinallpartsofthecountry.PleasecontactyourDowsalesrepresentativewithquestions.Note:Rmeansresistancetoheatflow.ThehighertheR-value,thegreatertheinsulatingpower.R-valuedeterminedbyASTMC518at75°Fmeantemperatureunlessotherwisespecified.

weather barrier solutions

add thermal protectionbuilding envelope solutions


A crosslinked polymeric film facer with butyl rubber adhesive creates a water-resistant seal atwindowanddooropenings.CompatiblewithWEATHERMATE™SillPan.

Meets requirements of ASTM E2112, ICBO AC148-01, ICC-ES AC 148-01 and AAMA 711-05.

SOLDINROLLS* 4" x 100' 6" x 100' 9" x 100'Thickness: 20 mil

WeAtHeRmAte™ Straight Flashing

WeAtHeRmAte™ construction tape


A crosslinked polymeric film facer with butyl rubber adhesive creates a water-resistant seal aroundcurvedwindowsanddoors,andcustomshapes.CompatiblewithWEATHERMATE™Sill Pan.

Meets requirements of ASTM E2112, ICBO AC148-01, ICC AC 148-01 and AAMA 711-05.

SOLDINROLLS* 6" x 75' 9" x 75'Thickness: 60 mil

WeAtHeRmAte™ Flexible Flashing


A flexible PVC sill pan manufactured for consistent thickness. Integrated corners offer excellentprotectionagainstwaterseepage.CompatiblewithWEATHERMATE™FlexibleFlashingandWEATHERMATE™StraightFlashing.

Meets requirements of ASTM E2112.

WeAtHeRmAte™ Sill Pan

DIMENSIONS:5" h x 3 3/4" d x 32" w (each piece) Sold as two-piece assembly

5

Polyurethane Foam Insulation, Sealant and Adhesive Products


Two-component, quick-cure spray polyurethane foams that fill studs, sill plates and large cavities for insulation and air sealing. The foam sealant kit is available in a selection of densities, properties and performance ranges to meet different application requirements. The full coverage spray foam insulation is available as a medium density foam.

FROTH-PAK™FoamSealantkitisULclassifiedasasealantR13655.

FROTH-PAK™FoamInsulationtestedtoASTME84 at 2" thick, meets building code Class A requirements.

CURETIME(1) Tack-free <1 min.; trim in <5 mins.

PRODUCTS

FRotH-PAK™ FoAm InSUlAtIon KItS

Product Theoretical Yield, bd ft(2)

Density, lb/ft3 R-Value, aged (initial)(4)

FROTH-PAK™200 200 1.75 5.6 (6.6)

FROTH-PAK™620 620 1.75 5.6 (6.6)

FROTH-PAK™spraypolyurethanefoamcontainsisocyanate,hydrofluorocarbonblowingagentandpolyol.ReadtheinstructionsandMaterialSafetyDataSheetscarefullybeforeuse.Wearprotective clothing (including long sleeves), gloves, goggles or safety glasses, and proper respiratory protection. Supplied air or an approved air-purifying respirator equipped with an organic vaporsorbentandaP100particulatefiltermayberequiredtomaintainexposurelevelsbelowACGIH,OSHA,WEELorotherapplicablelimits.Provideadequateventilation.Contentsunderpressure.

(1) Actual cure time will depend on temperature, foam thickness, specific nozzle used, etc. (2) The theoretical yield has become an industry standard for identifying certain sizes of two-component kits. Theoretical yield calculations are performed in perfect laboratory conditions, without taking into account the loss of blowing agent or the variations in application methods and types. A board foot equals 1 ft2 based on 1" thick. (3) Ft2•h•°F/Btu;agedLTTRmeasuredat2"thick(4) R-value per inch; ft2•h•°F/Btu;aged90daysat140°F

FRotH-PAK™ Foam Insulation and FRotH-PAK™ Foam Sealant Kits

FRotH-PAK™ FoAm SeAlAnt KItS

Product Theoretical Yield, bd ft(2)

Density, lb/ft3 R-Value, aged (initial)(3)

FROTH-PAK™12 12 1.9 4.6 (6.3)

FROTH-PAK™120 120 1.75 5.5 (6.0)

FROTH-PAK™200 200 1.75 5.5 (6.0)

FROTH-PAK™620 620 1.75 5.5 (6.0)

SOLDINROLLS* 1 7/8" x 165' 2 7/8" x 165' 3 7/8" x 165'


An all-weather polyurethane adhesive used for bonding subfloors, drywall, paneling, foam panels and most construction materials.

ListedwithPFSCorporationforadhesivemethodsASTMD6464 and ASTM D3498.

CURETIME(1) Holdingpowerin2hoursandfullbondin7days

SIzE* 26.5 oz can, gun applied only

(1) Actual cure time will depend on temperature, relative humidity and size of foam bead.

GREATSTUFFPRO™Wall&FloorAdhesivecontainsisocyanateandaflammable blowing agent. Read the label and Material Safety Data Sheet carefullybeforeuse.Eliminateallsourcesofignitionbeforeuse.Wearlongsleeves, gloves, and safety glasses or goggles. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure.


A one-component, minimal-expanding, low pressure-build formulation, polyurethane foam sealant that won’t bow window and door frames when applied properly. Identifiable yellow color.

ICC-ES ESR-1961. Tested to AAMA 812-04 pressure-build @ 0.08 psi, air leakage per ASTM E283, ASTM E331, ASTM E547, ASTMC1620.ULClassifiedasasealantR13655.

CURETIME(1) Tack-free 5-10 mins.; trim in 1 hour; full cure 12 hours

SIzE* 20 oz can, available in both gun and straw foam


GREATSTUFFPRO™Window&DoorInsulatingFoamSealantcontainsisocyanate and a flammable blowing agent. Read the label and Material Safety Data Sheet carefully before use. Eliminate all sources of ignition before use. Wearlongsleeves,gloves,andsafetyglassesorgoggles.Provideadequateventilation or wear proper respiratory protection. Contents under pressure.

GReAt StUFF PRo™ Window & door

GReAt StUFF PRo™ Wall & Floor Adhesive


A one-component, minimal-expanding, insulating, fire-blocking penetration polyurethane foam sealant ideal for smaller gaps and penetrations less than 3". Identifiable orange color.

ICC-ESESR-1961.ULClassifiedasasealantR13655.

CURETIME(1) Tack-free 5-10 mins.; trim in 30 mins.; full cure 1 hour

SIzE* 24 oz can, available in both gun and straw foam


Size Yield, linear ft(1) Density, lb/ft3

24 oz can 970 1.01

30 oz can 1450 1.01

(1) Yield at 3/8" diameter bead tested to ASTM C1536.

GREATSTUFFPRO™Gaps&CracksInsulatingFoamSealantcontainsisocyanate and a flammable blowing agent. Read the label and Material Safety Data Sheet carefully before use. Eliminate all sources of ignition before use. Wearlongsleeves,gloves,andsafetyglassesorgoggles.Provideadequateventilation or wear proper respiratory protection. Contents under pressure.

GReAt StUFF PRo™ Gaps & cracks


*Note:Notallproductsandsizesareavailableinallpartsofthecountry.PleasecontactyourDowsalesrepresentativewithquestions.Note:Rmeansresistancetoheatflow.ThehighertheR-value,thegreatertheinsulatingpower.R-valuedeterminedbyASTMC518at75°Fmeantemperatureunlessotherwisespecified.

building envelope solutions 6


An innovative solution simplifies uncured foam cleanup. Attach foam dispensing gun for cleaning or use red spray nozzle.

Notapplicable.

SIzE* 12 oz can GREATSTUFFPRO™GunCleanerisflammableandcontainsacetoneandpropane.ReadthelabelandMaterialSafetyDataSheetcarefullybeforeuse.Eliminateallsourcesofignitionbeforeuse.Weargloves,andgogglesorsafetyglasses.Provide adequate ventilation or wear proper respiratory protection. Contents under pressure.

GReAt StUFF PRo™ Gun cleaner


A two-component, 2 pcf density spray polyurethane foam system. Designed for fast, effective insulating air sealing for energy and moisture management around the building envelope. Three formulas for wide processing latitude.

Meets IBC/IRC requirements for foam plastic insulation. ASTM E84 Class A at 4 inches. See ICC ESR-2670.

StyRoFoAm™ Brand Spray Polyurethane Foam Insulation

AGEDR-VALUE(1) - RS2030 6.0 at 1"; 25 at 4"AGEDR-VALUE(1) - RS2045 6.4 at 1"; 24 at 4"AGEDR-VALUE(1) - RS2060 6.5 at 1"; 24 at 4"SIzE - RS2030/RS2045/RS2060 55 gal drum sets, A component (isocyanate)

B component (polyol blend), Total weight 990 lbs

(1)AgedR-Value@90days@140ºF,50%R.H.perFTCrequirementsSTYROFOAM™ Brand Spray Polyurethane Foam contains isocyanate, hydrofluorocarbon blowing agent and polyol. Read the instructions and MaterialSafetyDataSheetscarefullybeforeuse.Wearprotectiveclothing(includinglongsleeves),gloves,gogglesandproperrespiratoryprotection.Supplied air or an approved air-purifying respirator equipped with an organic vapor sorbent and a P100 particulate filter is required to maintain exposurelevelsbelowACGIH,OSHA,WEELorotherapplicablelimits.Provideadequateventilation.Contentsunderpressure.STYROFOAM™Brand SPF should be installed by a trained SPF applicator.


FoamdispensinggunsforGREATSTUFFPRO™products.Createsairtightsealbetweengun and can, allowing reuse of can for up to 30 days. Adjustable, pinpoint control and no post-dispensing foam drip for less foam waste.

Notapplicable.

PRODUCTS

PRO 13 Gun–Lightweight,durableplastichandle and body with metal trigger. Includes two 8" plastic extension straws and two 2" cone-shaped tips.

PRO 14 Gun – Durable, lightweight aluminum body, and large flow control knob with secured back-screw system. Nonstickcanadapterandneedle,andreplaceablesmoothdispensingnozzle.PRO14XLversionavailablewithone-piece extended barrel: 40" long.

PRO 15 Gun – Premium model features a nonstick can adapter, needle and check valve, and a stainless steel barrel for longer life. Smooth dispensing nozzle.

PRO 14XL Gun – Contractors and builders can now enjoy a longer, more comfortable reachwhileapplyingGREATSTUFFPRO™Wall&FloorAdhesive.ThenewlongerbarrelofthePRO14XLdispensinggunreachesan impressive 40" (102 cm) – replacing the previous 26.5" (67 cm) length.

PRO 14XL Dispensing Gun Guide Tip – A new guide tip–speciallydesignedforthePRO14XL–isnowavailable!The new guide tip helps align the gun over framing lumber to control the position of the bead for faster, more accurate dispensing. The new guide tips will be included in each Pro 14XLgunboxalongwithupdatedinstallationinstructions.AdditionalXLgunguidetipscanbeordered.

Pro 14

Pro 15

Pro 13

®™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow HabitatforHumanityisaregisteredservicemarkownedbyHabitatforHumanityInternational

PrintedinU.S.A. FormNo.179-07892X-1112MCK

NOTICE: No freedom from any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may not have been approved for use in all countries or regions. Dow assumes no obligation or liability for the information in this document. References to "Dow" or the "Company" mean the Dow legal entity selling the products to Customer unless otherwise expressly noted. NO EXPRESS WARRANTIES ARE GIVEN EXCEPT FOR ANY APPLICABLE WRITTEN WARRANTIES SPECIFICALLY PROVIDED BY DOW. ALL IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.

NOTICE: Changes to the International Residential Code require the installation of a water-resistive barrier (WRB) within most exterior wall assemblies in residential construction. The following Dow insulated sheathing products qualify as a WRB when installed according to the installation instructions developed for "installation of foam sheathing as a weather-resistive barrier": STYROFOAM™ DURAMATE™ Plus, STYROFOAM™ Residential Sheathing, STYROFOAM™ Tongue and Groove, STYROFOAM™ Square Edge, STYROFOAM™ Residing Board, THERMAX™ Sheathing, TUFF-R™ and Super TUFF-R™ and therefore do not require the use of a building paper or a housewrap as a WRB. When a WRB is not need-ed, these Dow foam sheathings may be installed according to standard installation instructions for foam sheathing from Dow. Be sure products and installation instructions meet code requirements for your particular location. Note: WEATHERMATE™ and WEATHERMATE™ Plus Housewraps have already qualified as water-resistive alternatives to the prescribed felt (see Evaluation Reports NER-593 and NER-640 for approved alternative).

STYROFOAM™ Brand Extruded Polystyrene Foam Insulation CAUTION: This product is combustible. Protect from high heat sources. A protective barrier or thermal barrier may be required as specified in the appropriate building code. For more information, consult MSDS, call Dow at 1-866-583-BLUE (2583) or contact your local building inspector. In an emergency, call 1-989-636-4400.

Dow Polyisocyanurate Insulation CAUTION: This product is combustible and shall only be used as specified by the local building code with respect to flame spread classification and to the use of a suitable thermal barrier. For more information, consult MSDS, call Dow at 1-866-583-BLUE (2583) or contact your local building inspector. In an emergency, call 1-989-636-4400.

WARNING: Rigid foam insulation does not constitute a working walkable surface or qualify as a fall protection product.

Dow Polyurethane Foam Insulation and Sealants CAUTION: When cured, these products are combustible and will burn if exposed to open flame or sparks from high-energy sources. Do not expose to temperatures above 240ºF. For more information, consult MSDS, call Dow at 1-866-583-BLUE (2583) or contact your local building inspector. In an emergency, call 1-989-636-4400.

GREAT STUFF PRO™ Insulating Foam Sealants contain isocyanate and a flammable blowing agent. Read the labels and Material Safety Data Sheets carefully before use. Eliminate all sources of ignition before use. Wear long sleeves, gloves, and goggles or safety glasses. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure.

FROTH-PAK™ Spray Polyurethane Foam contains isocyanate, hydrofluorocarbon blowing agent and polyol. Read the instructions and Material Safety Data Sheets carefully before use. Wear protective clothing (including long sleeves), gloves, goggles or safety glasses, and proper respiratory protection. Do not breathe vapor or mist. Use only with adequate ventilation. It is recommended that applicators and those working in the spray area wear respiratory protection. Increased ventilation significantly reduces the potential for isocyanate exposure, however, supplied air or an approved air-purifying respirator equipped with an organic vapor sorbent and a particulate filter may still be required to maintain exposure levels below ACGIH, OSHA, WEEL or other applicable limits. For situations where the atmospheric levels may exceed the level for which an air-purifying respirator is effective, use a positive-pressure, air-supplying respirator (air line or self-contained breathing apparatus). Spraying large amounts of foam indoors may require the use of a positive pressure, air-supplying respirator. Contents under pressure.

STYROFOAM™ Brand Spray Polyurethane Foam contains isocyanate, hydrofluorocarbon blowing agent and polyol. Read the instructions and Material Safety Data Sheets carefully before use. Wear protective clothing (including long sleeves), gloves, goggles and proper respiratory protection. Supplied air or an approved air-purifying respirator equipped with an organic vapor sorbent and a P100 particulate filter is required to maintain exposure levels below ACGIH, OSHA, WEEL or other applicable limits. Provide adequate ventilation. Contents under pressure. STYROFOAM™ Brand SPF should be installed by a trained SPF applicator.

TILE BOND™ Roof Tile Adhesive contains isocyanate and a hydrofluorocarbon blowing agent. Read the label and Material Safety Data Sheet carefully before use. Wear long sleeves, gloves, and goggles or safety glasses. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure.

GREAT STUFF PRO™ Gun Cleaner is flammable and contains acetone and propane. Read the label and Material Safety Data Sheet carefully before use. Eliminate all sources of ignition before use. Wear gloves, and goggles or safety glasses. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure.

Building and/or construction practices unrelated to building materials could greatly affect moisture and the potential for mold formation. No material supplier including Dow can give assurance that mold will not develop in any specific system.

PRo Foam dispensing Guns



A portable, one-component, minimal-expanding roof tile adhesive for attaching concrete and clay roof tiles in new and reroof applications.

ULClassifiedasanadhesive.Miami-DadeNOA08-512.18, Expiration Date 8/23/11. Florida Building CodeFL717-R2.

APPLICATIONTEMPERATURE 60°F-90°F

SIzE* 28 oz can, 23 lb canister

TILEBOND™RoofTileAdhesivecontainsisocyanateandahydrofluorocarbon blowing agent. Read the label and Material SafetyDataSheetcarefullybeforeuse.Wearlongsleeves,gloves,and goggles or safety glasses. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure.

tIle Bond™

*Note:Notallproductsandsizesareavailableinallpartsofthecountry.PleasecontactyourDowsalesrepresentative with questions.

THEDOWCHEMICALCOMPANY.DowBuildingSolutions.200Larkin.Midland,MI48674ForTechnicalInformation:1-866-583-BLUE(2583)

For Sales Information: 1-800-232-2436

www.insulateyourhome.com

McKAY216224

Pro 14XL

guide tiP

Documents

an extensive line of science-based solutions