Intend to build a career with leading corporate of hi-tech environment which help me to explore and utilize my technical and managerial skill to the best of my abilities to perform any given task.

B-Tech in Electrical Engineering from Konark Institute of Science and Technology affiliated from BPUT University, Bhubaneswar having an aggregate of 7.25 CGPA in the academic year 2009.

7 Year of core experience in the field of power sector, primarily in sub-critical coal fired thermal power plant.

Toshiba Jsw Power System pvt Ltd:- Working as Assistant Manager in department of Commissioning .Involve in commissioning activity of TG area.Current project:- NTPC (Kudgi) 3*800MW.Duration:-August 2016-till date.

Lanco Infratech Limited: - Working as Senior engineer in department of Commissioning and Maintenance. Currently involved in commissioning activity of BTG package of Moserbaer project 2*600MW supplied by HTC Sub critical coal based thermal power plant.Project: - Udupi power corporation ltd(2*600MW), Anpara power (2*600MW), Amarkanthak power(2*660MW).Current project:- MBPIL (2*600MW)Duration:-June 2010 – july 2016.Role: - Engineer.

AMRIT KUMAR PATTANAIK LIG-134, BRIT COLONY, BHUBANESWAR-751012 MOB-9583336861, 7619686733 EMAIL: - amritpattanaik87@gmail.com Passport no - L3221527

OBJECTIVE

PROFESSIONAL QUALIFICATION

WORK EXPERIENCE

PREVIOUS ORGANIZATION

PRESENT ORGANIZATION

Responsibility:-Testing, Commissioning and Maintenance of HT & LT Switchgear,Generator, Generator Transformer (3*250MVA), Distribution Transformer, HT & LT Drives, Switchyard 400kV.

ROLES IN TESTING AND COMMISSIONING

HT & LT Switchgear (0.415kV-11kV) Testing of equipment and relay setting. Checking of internal wiring and healthiness of equipment (i.e. CT, PT, Relay,

Breaker etc). Checking of equipment as per diagram. Testing and commissioning of ELDB and MLDB.

HT & LT Drives (0.37kW-11000kW) Testing of motor (i.e. Megger, Resistance, Differential etc.) Inspection of HT Drive and verifying its technical specification. Relay setting as per motor requirement. Preparation of commissioning checklist and protocol. Coordinating with erection team for quality work and raising of pending points

of HT Drives.Transformer(Generator Tansformer 250MVA*3,UT 31MVA)

Testing of transformer(i.e. Tan-delta ,Stability, Differential etc.) Checking of interpanel wiring of CMB and Main panel. Testing and commissioning of fans.

Distribution Transformer Testing of transformer(i.e.Stability,Differential etc.) Checking interpanel wiring of MB. Relay setting as per transformer requirement.

Generator Scheme checking. CT wiring of generator protection. Testing of Generator and Rotor. SCC & OCC test while rolling of turbine in 3000 rpm.

AVR Testing of AVR. Checking of the wiring and connection of external cable & feedback cable. Operating of AVR in Manual & Auto Mode. Worked in both ABB and TOSHIBA make.

Switchyard(400kV)

RESPONSIBILITIES

Testing of equipment of switchyard(SF6 Breaker,Isolator etc). Loop checking and interpanel wiring checking of relay panel and equipment of switchyard.

Relay testing (i.e. I/O signal).

ABT(Auto Bus Transfer) Checking of inter panel wiring of ABT panel. Checking and termination of cable in switchgear and ABT as per requirement. Relay setting as per requirement.

DC System Testing and commissioning of 220 v battery charger and bank. Testing and commissioning of 48v battery charger and bank. Troubleshooting of DC System. Commissioning of DC Motor and its panel.

DG System Cheching of AMF panel. Testing & Commissioning of DG set. Checking interlocks between DG AMF panel and EMCC.

Documents Modification of control drawing as per site requirement. Study & Reviewing of Control & protection schemes control/ Logic diagram for

various electrical equipment.

ROLES IN MAINTENANCE

Maintenance and Troubleshooting of HT/LT Switchgear, transformer. Checking of Motor protection along with their periodic maintenance. Maintenance of Battery Charger with battery bank & DC drives. Maintenance and Troubleshooting of HT/LT Drives.

10 Week training on “Power Plant Familiarization” at NPTI, Neyvelli. 1 Week training on “Electrical Protection System” conducted by ABB. 3 days Standard course on UNITROl-5000 SES product operation and

maintenance at ABB, Bangalore. Undergone 60 days Industrial Training at Hindustan Copper Limited,

moubhandar, Jharkhand. Undergone 30 days training in Transmission and Distribution in OPTCL,

Bhubaneswar.

v COMPUTER SKILLS

TRAINING AND CERTIFICATION

AUTO CAD C/C++ MS Office/Outlook

FATHER NAME: - ANIL KUMAR PATTANAIKMOTHER NAME: - ANGURBALA PATTANAIKDATE OF BIRTH: - 31/03/1987GENDER:- MALELANGUAGE: - ENGLISH, HINDI, ODIYA

I hereby declare that the information furnished above is true to the best of my knowledge.

AMRIT KUMAR PATTANAIK

PERSONAL DETAILS

DECLARATION