1

Amphenol Industrial OperationsCompetitive Cross Reference

5015 CYLINDRICAL CONNECTORSCompetitive Information

MIL-5015 Amphenol CannonClasses A, C, E, F, R Classes A, C, E, F, B, K, R

MIL-DTL-5015 and MIL-5015 Type Connectors

AC Threaded Series Commercial 5015

Competitive InformationAC Series

Commercial 5015 Amphenol CannonSolder ACS (solder) Cannon Series CACrimp ACC (LC) or 75 series Cannon Series CA-F80

97 SERIES CONNECTORS

97 Series Commercial 5015

Competitive Information97 Series

Commercial 5015 Amphenol Cannon DDK

Class A & B 97-310X (solder) / 97-410X (crimp) CA-COM or CA-A&B DMSSpecial Purpose 7-Series

GT REVERSE BAYONET SERIES CONNECTORSCompetitive Information

GT SeriesReverse Bayonet Amphenol Veam Spacecraft AB Connectors Commital

GT CIR SPCB ABCIRH ITS

GT Reverse Bayonet Series

AC THREADED SERIES CONNECTORS

GT REVERSE BAYONET SERIES CONNECTORSCompetitive Information

GT SeriesReverse Bayonet Amphenol Veam Spacecraft AB Connectors Commital

GT CIR SPCB ABCIRH ITS

GT Reverse Bayonet Series

• Power type connector, threaded coupling• Large contacts (older series - solder), (newer series - crimp, front or rear removable)• MS versions (MIL-DTL-5015 Classes F & R); Non-MS versions (Classes A, C, E)• Wire ranges: 0-16 AWG• Environmentally resistant with resilient neoprene insertsOther series that use 5015 type insert patterns :

• AC threaded series (modification of MIL-5015) (available with RADSOK)• 97 Series (non-environmental hard dielectric inserts)• GT reverse bayonet series (available with RADSOK)• ACA-B reverse bayonet series (available with RADSOK)

• Modification of MIL-5015 connector, designed for industrial applications• General duty, environmentally resistant, threaded coupling (previously offered AC-B

Bayonet is replaced with ACA-B bayonet series - see back)• Crimp or solder contacts, also available with RADSOK® contacts

• General duty and power commercial 5015 Class A&B, threaded coupling• Large contacts, solder type (310X series), or crimp (410X series)• Wire ranges: 0-30 AWG• Non-environmental hard dielectric (diallyl-phthalate) inserts

• Heavy duty, rugged, for harsh environments• Reverse bayonet quick positive coupling• Signal and power contacts, crimp and solder, also available with RADSOK® contacts• Wire ranges: 4/0-24 AWG• Water proof -IP67, high shock and vibration capabilities• Metal wear pin minimum 2000+ mating cycles• Low smoke/flame retardant inserts available

CP, SC, SF, CS, Amphenol MS310X Cannon MS310XSG, SB, SMExamples: MS3101 Cannon MS3101

Website: www.amphenol-industrial.comTechnical Support Phone: 866-315-8559

®

L-1103 Printed by Amphenol 12/2005

2

ACA-B REVERSE BAYONET CONNECTORS

ACA-B Reverse Bayonet Connectors

Competitive InformationACA-B Series

Reverse Bayonet Amphenol CannonACA-B CA-Bayonet

MIL-C-26482 and Proprietary PT Connectors

MINIATURE CYLINDRICAL MIL-C-26482, SERIES 1CONNECTORSCompetitive Information

MIL-C-26482Series 1, Solder Amphenol Burndy Cannon Framatome Array Veam

PT BT KPT 851-00 PW VPT

Competitive InformationMIL-C-26482

Series 1, Crimp Amphenol Burndy Cannon VeamPT-SE LTE, LTF KP-SE VPTXXSE

AMPHE-LITETM CONNECTORSCompetitive Information

Amphe-LiteTM

Commercial 38999 Amphenol Deutsch DeutschSeries III Type Plated / Unplated Plated Unplated

AL 59,000/60,000 HPC orLow Cost BVD

Amphe-Lite Connectors

Competitive InformationNon-MagneticAmphe-LiteTM Amphenol

AL( ) ( )NMG No True Competitors for Multi-pinNon-Magnetic Connectors

Non-Magnetic Amphe-Lite Connectorswith “Combo’C” Inserts and Flex

• Heavy duty, rugged• Reverse bayonet quick positive coupling• Signal and power contacts, crimp and solder, also available with RADSOK® contacts• Wire ranges: 0-22 AWG• Water proof -IP67, high shock and vibration capabilities• Minimum 500+ mating cycles, no wear pin

• Miniature size, environmental• Large family of MS versions and non-MS versions• Most series in family are 3-point bayonet coupling; threaded PC types also available• Medium size contacts• Signal and power current, solder (MS311X) or crimp (MS312X), front release• Wire ranges: 20, 16 and 12 AWG• Resilient inserts provide high dielectric strength and moisture barrier

• High performance subminiature, environmental (offers 38999 type capabilities, yet is cost effectiveenough for general duty and non-environmental use)

• Threaded coupling, composite shells resist corrosion• Blind-mate, scoop proof recessed pins• Class F provides EMI shielding protection; Class U provides an unplated, lower cost option, when

EMI shielding is not a criteria• Non-magnetic Amphe-Lite connectors also available - ideal for medical and test equipment where a non-

magnetic connector is required• Wide range of contact options: 10 (power), 12, 16, 20 & 22D; signal, coax and grounded types; fiber

optic termini and flex termination (“Combo-C” inserts with combinations of contact types in one shell)• Filter Amphe-Lite connectors available

Website: www.amphenol-industrial.comTechnical Support Phone: 866-315-8559

3

PYLE P-LOK CONNECTORSCompetitive Information

Pyle P-LokPush/Pull 5015 Style Amphenol

P-Lok No True Competitors

P-Lok Connectors

SUR-LOK COMPRESSION LUGSCompetitive Information

Plastic Sur-LokCompression Lug Amphenol

Sur-Lok Standard Lugs & Terminals; No True Competitorsfor Lugs with High Amperage RADSOK Contacts

Sur-Lok Connectors

Amphe-PD Connectors

Competitive InformationAmphe-PD

2-Position Molded Amphenol Anderson Power Tyco ElectronicsAmphe-PD SB50 Amp Power Series 50

AMPHE-PD INTERCONNECTS

AMPHE-POWERTM CONNECTORS WITH RADSOK® TECHNOLOGYCompetitive Information

Cylindrical Connectorswith RADSOK Amphenol

Amphe-Power 5015 (AC) AC( )R( ) No True Competitors for CylindricalAmphe-Power GT GT( )(RDS) Connectors with RADSOK ContactsAmphe-Power P-Lok P( )7( )

Amphe-PowerTM ConnectorsAmphenol Catalogs for further product information on the industrial products listed in this cross reference:• 12-020, MS/Standard MIL-5015 Cylindrical Connectors• 12-025, AC Threaded Cylindrical Connectors• 12-022, 97 Series Connectors• 12-024, GT Series Reverse Bayonet Connectors• 12-027, ACA-B Series Reverse Bayonet Connectors

• 12-094, Amphe-Lite Series Connectors• 12-070, Miniature Cylindrical MIL-C-26482, Series 1 Connectors• Pyle P-Lok Series Connectors• SL-391, Amphe-Power Connectors with RADSOK Technology• SL-381, Industrial Product Overview

RADSOK®

Contact

These catalogs and most all other product catalogs offered by Amphenol Industrial Operations are on-line at:Amphenol Technical Support Phone: 866-315-8559

• Standard duty, environmental, 5015 style• Push/pull coupling - provides audible and tactile positive locking and is excellent for tight spaces where

threading of connector would be difficult• Signal and power contacts, crimp and solder, also available with RADSOK® contacts (RADSOK

provides low insertion force)• Wire ranges: 16, 12, 8, 4, 2, 0, 0/4• Environmental IP65 seal; black hardcoat finish provides long service life

• Compression lug - high power, high amperage with RADSOK® socket contact• Built-in contact which is able to connect to busbars, high current PCB and cable assemblies• Takes up less space than traditional lugs while offering higher ampacity and reliability• Tool-less installation for ease of use and installation/replacement• Comes with a plastic molded cover which is attached after crimping

• High power 2-position molded connector with high amperage RADSOK® socket contact• Non-environmental power distribution connector with high reliability for power supply, battery, busbar,

power PCB and telecom/datacom applications• 3.6mm contact• TUV “touch-proof” safety feature• Smaller than competitors and higher amperage rating than competitors

• High amperage capability connectors for the most demanding industrial and transportation applications• Amphe-Power family consists of: 5015 (AC), GT and P-Lok connectors enhanced with RADSOK contacts

(hyperbolic, stamped grid configuration within the socket) that handle up to 50% higher amperages than standardcontacts, Composite GT with RADSOK also available

• Current Amphe-Power lines support from 50A to 500A continuous duty• RADSOK contacts available in sizes 12 (35 amps), 8 (69 amps), 4 (120 amps), 0 (250 amps), 4/0 (500 amps)• Crimp termination standard, with solder type in development• Hybrid arrangements with RADSOK and power contacts can be tailored to meet customer needs

www.amphenol-industrial.com