5
Registered by: ApprovalMark International Pty Ltd (ABN 69 143 259 974) Unit 20, 33 Holbeche Road, Arndell Park NSW 2148 Australia. The assessment was carried with appropriate skill and assessment by ApprovalMark International Pty Ltd; however it will only accept its responsibility for proven negli- gence. The certificate remains the property of ApprovalMark International Pty Ltd. CERTIFICATE OF CONFORMITY ApprovalMark International hereby grants: ISO TYPE 5 TM ALLIANCE WORLDWIDE 44 The Gateway, Broadmedows Melbourne, VIC 3047 AUSTRALIA AS 4176.8 - 2010 Multilayer pipes for pressure application.Part 8: Multilayer pipe systems for consumer gas installations with maximum operating pressure up to and including 5 bar (500 kPa) specifications for systems (ISO 17484-1:2006, MOD) Evaluated to: The ISO Type 5 licensee shall comply with all the terms and conditions as stipulated by the governance of the operating rules of ISO Type 5 scheme, and shall comply with standard requirement at all times including when standard is amended. The ISO Type 5 license only covers the product which is identified in the product schedule. Certificate No. AMI 74520 Issued: 10th July 2018 Original Issue: 10th July 2013 Expires: 10th July 2023 John PRASAD Director WWW.JAS-ANZ.ORG/REGISTER

AMI-FRM-0040 - ISO Type 5 Certificate of Conformity Template · (ISO 17484-1:2006, MOD) Evaluated to: The ISO Type 5 licensee shall comply with all the terms and conditions as stipulated

Embed Size (px)

Citation preview

Page 1: AMI-FRM-0040 - ISO Type 5 Certificate of Conformity Template · (ISO 17484-1:2006, MOD) Evaluated to: The ISO Type 5 licensee shall comply with all the terms and conditions as stipulated

Registered by: ApprovalMark International Pty Ltd (ABN 69 143 259 974) Unit 20, 33 Holbeche Road, Arndell Park NSW 2148 Australia. The assessment was carried with appropriate skill and assessment by ApprovalMark International Pty Ltd; however it will only accept its responsibility for proven negli-gence. The certificate remains the property of ApprovalMark International Pty Ltd.

CERTIFICATE OFCONFORMITY

ApprovalMark International hereby grants:

ISO

TY

PE

5TM

ALLIANCE WORLDWIDE44 The Gateway, BroadmedowsMelbourne, VIC 3047AUSTRALIA

AS 4176.8 - 2010 Multilayer pipes for pressure application.Part 8: Multilayer pipe systems for consumer gas installations with maximum operating pressure up to and including 5 bar (500 kPa) specifications for systems (ISO 17484-1:2006, MOD)

Evaluated to:

The ISO Type 5 licensee shall comply with all the terms and conditions as stipulated by the governance of the operating rules of ISO Type 5 scheme,and shall comply with standard requirement at all times including when standard is amended. The ISO Type 5 license only covers the product which is identified in the product schedule.

Certificate No. AMI 74520

Issued: 10th July 2018 Original Issue: 10th July 2013 Expires: 10th July 2023

John PRASAD Director

WWW.JAS-ANZ.ORG/REGISTER

Page 2: AMI-FRM-0040 - ISO Type 5 Certificate of Conformity Template · (ISO 17484-1:2006, MOD) Evaluated to: The ISO Type 5 licensee shall comply with all the terms and conditions as stipulated

 

       Page 1 of 4 

 

Alliance Worldwide 44 The Gateway, Broadmeadows Melbourne, VIC 3047 AUSTRALIA ISO Type 5 Certificate of Conformity

Evaluated to:

AS 4176.8: 2010 - Multilayer pipes for pressure applications - Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD)

Model Id Model Name 

Brand Name 

Product Description Endorsement 

Date 

40CXLC‐ 16x25  VELPEX  VELPEX  DN16 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 25m  10th July 2013 

40CXLC‐ 16x50  VELPEX  VELPEX  DN16 ‐ PN16 Pex‐Al‐Pex Pipe Yellow  50m  10th July 2013 

40CXLC‐ 20x25  VELPEX  VELPEX  DN20 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 25m  10th July 2013 

40CXLC‐ 20x50  VELPEX  VELPEX  DN20 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 50m  10th July 2013 

40CXLC‐ 20x100  VELPEX  VELPEX  DN20 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 100m  10th July 2013 

40CXCL‐ 25x25  VELPEX  VELPEX  DN25 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 25m  10th July 2013 

40CXCL‐ 25x50  VELPEX  VELPEX  DN25 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 50m  10th July 2013 

40CXCL‐ 32x25  VELPEX  VELPEX  DN32 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 25m  10th July 2013 

40CXCL‐ 32x50  VELPEX  VELPEX  DN32 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 50m  10th July 2013 

40CXCLC‐ 16  VELPEX  VELPEX  DN16 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 5m  10th July 2013 

40CXCLC‐ 20  VELPEX  VELPEX  DN20 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 5m  10th July 2013 

40CXCLC‐ 25  VELPEX  VELPEX  DN25 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 5m  10th July 2013 

40CXCLC‐ 32  VELPEX  VELPEX  DN32 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 5m  10th July 2013 

40CXCLC‐ 40  VELPEX  VELPEX  DN40 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 5m  10th July 2013 

40CXCLC‐ 50  VELPEX  VELPEX  DN50 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 5m  10th July 2013 

40CXCLC‐ 63  VELPEX  VELPEX  DN63 ‐ PN16 Pex‐Al‐Pex Pipe Yellow 5m  10th July 2013 

40CXLXC‐ 16  VELPEX  VELPEX  DN16 Straight Coupling  10th July 2013 

40CXLXC‐ 20  VELPEX  VELPEX  DN20 Straight Coupling  10th July 2013 

40CXLXC‐ 25  VELPEX  VELPEX  DN25 Straight Coupling  10th July 2013 

40CXLXC‐ 32  VELPEX  VELPEX  DN32 Straight Coupling  10th July 2013 

40CXLXC‐ 40  VELPEX  VELPEX  DN40 Straight Coupling  10th July 2013 

40CXLXC‐ 50  VELPEX  VELPEX  DN50 Straight Coupling  10th July 2013 

40CXLXC‐ 63  VELPEX  VELPEX  DN63 Straight Coupling  10th July 2013 

40CXLR‐ 2016  VELPEX  VELPEX  DN20 ‐ DN16 Reducer  10th July 2013 

40CXLR‐ 2516  VELPEX  VELPEX  DN25 ‐ DN16 Reducer  10th July 2013 

40CXLR‐ 2520  VELPEX  VELPEX  DN25 ‐ DN20 Reducer  10th July 2013 

40CXLR‐ 3220  VELPEX  VELPEX  DN32 ‐ DN20 Reducer  10th July 2013 

40CXLR‐ 3225  VELPEX  VELPEX  DN32 ‐ DN25 Reducer  10th July 2013 

40CXLR‐ 4020  VELPEX  VELPEX  DN40 ‐ DN20 Reducer  10th July 2013 

40CXLR‐ 4025  VELPEX  VELPEX  DN40 ‐ DN25 Reducer  10th July 2013 

40CXLR‐ 4032  VELPEX  VELPEX  DN40 ‐ DN32 Reducer  10th July 2013 

40CXLR‐ 5025  VELPEX  VELPEX  DN50 ‐ DN25 Reducer  10th July 2013 

40CXLR‐ 5032  VELPEX  VELPEX  DN50 ‐ DN32 Reducer  10th July 2013 

40CXLR‐ 5040  VELPEX  VELPEX  DN50 ‐ DN40 Reducer  10th July 2013 

Page 3: AMI-FRM-0040 - ISO Type 5 Certificate of Conformity Template · (ISO 17484-1:2006, MOD) Evaluated to: The ISO Type 5 licensee shall comply with all the terms and conditions as stipulated

 

       Page 2 of 4 

 

Model Id Model Name 

Brand Name 

Product Description Endorsement 

Date 

40CXLR‐ 6340  VELPEX  VELPEX  DN63 ‐ DN40 Reducer  10th July 2013 

40CXLR‐ 6350  VELPEX  VELPEX  DN63 ‐ DN50 Reducer  10th July 2013 

40CXLMI‐ 1616  VELPEX  VELPEX  DN16 ‐ 1/2 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 2016  VELPEX  VELPEX  DN20 ‐ 1/2 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 2020  VELPEX  VELPEX  DN20 ‐ 3/4 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 2520  VELPEX  VELPEX  DN25 ‐ 3/4 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 2525  VELPEX  VELPEX  DN25 ‐ 1 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 3220  VELPEX  VELPEX  DN32 ‐ 3/4 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 3235  VELPEX  VELPEX  DN32 ‐ 1 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 3232  VELPEX  VELPEX  DN32 ‐ 1 1/4 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 4025  VELPEX  VELPEX  DN40 ‐ 1 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 4032  VELPEX  VELPEX  DN40 ‐ 1 1/4 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 4040  VELPEX  VELPEX  DN40 ‐ 1 1/2 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 5040  VELPEX  VELPEX  DN50 ‐ 1 1/2 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 5050  VELPEX  VELPEX  DN50 ‐ 2 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 6332  VELPEX  VELPEX  DN63 ‐ 1 1/4 Inch Male Iron Union  10th July 2013 

40CXLMI‐ 6350  VELPEX  VELPEX  DN63 ‐ 2 Inch Male Iron Union  10th July 2013 

40CXLFI‐ 1616  VELPEX  VELPEX  DN16 ‐ 1/2 Inch Female Iron Union  10th July 2013 

40CXLFI‐ 2016  VELPEX  VELPEX  DN20 ‐ 1/2 Inch Female Iron Union  10th July 2013 

40CXLFI‐ 2020  VELPEX  VELPEX  DN20 ‐ 3/4 Inch Female Iron Union  10th July 2013 

40CXLFI‐ 2516  VELPEX  VELPEX  DN25 ‐ 1/2 Inch Female Iron Union  10th July 2013 

40CXLFI‐ 2520  VELPEX  VELPEX  DN25 ‐ 3/4 Inch Female Iron Union  10th July 2013 

40CXLFI‐ 2525  VELPEX  VELPEX  DN25 ‐ 1 Inch Female Iron Union  10th July 2013 

40CXLFI‐ 3225  VELPEX  VELPEX  DN32 ‐ 1 Inch Female Iron Union  10th July 2013 

40CXLFI‐ 4025  VELPEX  VELPEX  DN40‐ 1 Inch Female Iron Union  10th July 2013 

40CXLFI‐ 6325  VELPEX  VELPEX  DN63‐ 1 Inch Female Iron Union  10th July 2013 

40CXLFI‐ 6350  VELPEX  VELPEX  DN63 ‐ 2 Inch Female Iron Union  10th July 2013 

40CXLE‐ 16  VELPEX  VELPEX  DN16 Equal Elbow  10th July 2013 

40CXLE‐ 20  VELPEX  VELPEX  DN20 Equal Elbow  10th July 2013 

40CXLE‐ 25  VELPEX  VELPEX  DN25 Equal Elbow  10th July 2013 

40CXLE‐ 32  VELPEX  VELPEX  DN32 Equal Elbow  10th July 2013 

40CXLE‐ 40  VELPEX  VELPEX  DN40 Equal Elbow  10th July 2013 

40CXLE‐ 50  VELPEX  VELPEX  DN50 Equal Elbow  10th July 2013 

40CXLE‐ 63  VELPEX  VELPEX  DN63 Equal Elbow  10th July 2013 

40CXLEMI‐ 1616  VELPEX  VELPEX  DN16 ‐ 1/2 Inch Male Iron Elbow  10th July 2013 

40CXLEMI‐ 2016  VELPEX  VELPEX  DN20 ‐ 1/2 Inch Male Iron Elbow  10th July 2013 

40CXLEMI‐ 2020  VELPEX  VELPEX  DN20 ‐ 3/4 Inch Male Iron Elbow  10th July 2013 

40CXLEMI‐ 2520  VELPEX  VELPEX  DN25 ‐ 3/4 Inch Male Iron Elbow  10th July 2013 

40CXLEMI‐ 2525  VELPEX  VELPEX  DN25 ‐ 1 Inch Male Iron Elbow  10th July 2013 

40CXLEMI‐ 3225  VELPEX  VELPEX  DN32 ‐ 1 Inch Male Iron Elbow  10th July 2013 

40CXLEMI‐ 4025  VELPEX  VELPEX  DN40 ‐ 1 Inch Male Iron Elbow  10th July 2013 

40CXLEFI‐ 1616  VELPEX  VELPEX  DN16 ‐ 1/2 Inch Female Iron Elbow  10th July 2013 

40CXLEFI‐ 2016  VELPEX  VELPEX  DN20 ‐ 1/2 Inch Female Iron Elbow  10th July 2013 

40CXLEFI‐ 2020  VELPEX  VELPEX  DN20 ‐ 3/4 Inch Female Iron Elbow  10th July 2013 

40CXLEFI‐ 2520  VELPEX  VELPEX  DN25 ‐ 3/4 Inch Female Iron Elbow  10th July 2013 

40CXLEFI‐ 2525  VELPEX  VELPEX  DN25 ‐ 1 Inch Female Iron Elbow  10th July 2013 

40CXLEFI‐ 3225  VELPEX  VELPEX  DN32 ‐ 1 Inch Female Iron Elbow  10th July 2013 

40CXLEFI‐ 4040  VELPEX  VELPEX  DN40 ‐ 1 1/2 Inch Female Iron Elbow  10th July 2013 

40CXFIEL‐ 1616  VELPEX  VELPEX  DN16 ‐ 1/2 Inch Wall Plated Female Iron Elbow  10th July 2013 

40CXFIEL‐ 2016  VELPEX  VELPEX  DN20 ‐ 1/2 Inch Wall Plated Female Iron Elbow  10th July 2013 

Page 4: AMI-FRM-0040 - ISO Type 5 Certificate of Conformity Template · (ISO 17484-1:2006, MOD) Evaluated to: The ISO Type 5 licensee shall comply with all the terms and conditions as stipulated

 

       Page 3 of 4 

 

Model Id Model Name 

Brand Name 

Product Description Endorsement 

Date 

40CXFIEL‐ 2020  VELPEX  VELPEX  DN20 ‐ 3/4 Inch Wall Plated Female Iron Elbow  10th July 2013 

40CXLT‐ 16  VELPEX  VELPEX  DN16 Equal Tee  10th July 2013 

40CXLT‐ 20  VELPEX  VELPEX  DN20 Equal Tee  10th July 2013 

40CXLT‐ 25  VELPEX  VELPEX  DN25 Equal Tee  10th July 2013 

40CXLT‐ 32  VELPEX  VELPEX  DN32 Equal Tee  10th July 2013 

40CXLT‐ 40  VELPEX  VELPEX  DN40 Equal Tee  10th July 2013 

40CXLT‐ 50  VELPEX  VELPEX  DN50 Equal Tee  10th July 2013 

40CXLT‐ 63  VELPEX  VELPEX  DN63 Equal Tee  10th July 2013 

40CXLTR‐ 201616  VELPEX  VELPEX  DN20 ‐ DN16 ‐ DN16 Unequal Tee  10th July 2013 

40CXLTR‐ 201620  VELPEX  VELPEX  DN20 ‐ DN16 ‐ DN20 Unequal Tee  10th July 2013 

40CXLTR‐ 202016  VELPEX  VELPEX  DN20 ‐ DN20 ‐ DN16 Unequal Tee  10th July 2013 

40CXLTR‐ 251625  VELPEX  VELPEX  DN25 ‐ DN16 ‐ DN25 Unequal Tee  10th July 2013 

40CXLTR‐ 252020  VELPEX  VELPEX  DN25 ‐ DN20 ‐ DN20 Unequal Tee  10th July 2013 

40CXLTR‐ 252025  VELPEX  VELPEX  DN25 ‐ DN20 ‐ DN25 Unequal Tee  10th July 2013 

40CXLTR‐ 252520  VELPEX  VELPEX  DN25 ‐ DN25 ‐ DN20 Unequal Tee  10th July 2013 

40CXLTR‐ 321632  VELPEX  VELPEX  DN32 ‐ DN16 ‐ DN32 Unequal Tee  10th July 2013 

40CXLTR‐ 322032  VELPEX  VELPEX  DN32 ‐ DN20 ‐ DN32 Unequal Tee  10th July 2013 

40CXLTR‐ 322525  VELPEX  VELPEX  DN32 ‐ DN25 ‐ DN25 Unequal Tee  10th July 2013 

40CXLTR‐ 322532  VELPEX  VELPEX  DN32 ‐ DN25 ‐ DN32 Unequal Tee  10th July 2013 

40CXLTR‐ 402040  VELPEX  VELPEX  DN40 ‐ DN20 ‐ DN40 Unequal Tee  10th July 2013 

40CXLTR‐ 402532  VELPEX  VELPEX  DN40 ‐ DN25 ‐ DN32 Unequal Tee  10th July 2013 

40CXLTR‐ 402540  VELPEX  VELPEX  DN40 ‐ DN25 ‐ DN40 Unequal Tee  10th July 2013 

40CXLTR‐ 403232  VELPEX  VELPEX  DN40 ‐ DN32 ‐ DN32 Unequal Tee  10th July 2013 

40CXLTR‐ 403240  VELPEX  VELPEX  DN40 ‐ DN32 ‐ DN40 Unequal Tee  10th July 2013 

40CXLTR‐ 502050  VELPEX  VELPEX  DN50 ‐ DN20 ‐ DN50 Unequal Tee  10th July 2013 

40CXLTR‐ 502550  VELPEX  VELPEX  DN50 ‐ DN25 ‐ DN50 Unequal Tee  10th July 2013 

40CXLTR‐ 503240  VELPEX  VELPEX  DN50 ‐ DN32 ‐ DN40 Unequal Tee  10th July 2013 

40CXLTR‐ 503250  VELPEX  VELPEX  DN50 ‐ DN32 ‐ DN50 Unequal Tee  10th July 2013 

40CXLTR‐ 504050  VELPEX  VELPEX  DN50 ‐ DN40 ‐ DN50 Unequal Tee  10th July 2013 

40CXLTR‐ 634063  VELPEX  VELPEX  DN63 ‐ DN40 ‐ DN63 Unequal Tee  10th July 2013 

40CXLTR‐ 635063  VELPEX  VELPEX  DN63 ‐ DN50 ‐ DN63 Unequal Tee  10th July 2013 

40CXLCOPB‐ 16  VELPEX  VELPEX  DN16 ‐ 1/2 Inch Copper Brazing Tail  10th July 2013 

40CXLCOPB‐ 20  VELPEX  VELPEX  DN20 ‐ 3/4 Inch Copper Brazing Tail  10th July 2013 

40CXLCOPB‐ 25  VELPEX  VELPEX  DN25 ‐ 1 Inch Copper Brazing Tail  10th July 2013 

40CXMIEL‐ 1616x65 

VELPEX  VELPEX DN16 ‐ 1/2 Inch X 65mm Wall Plated Extended Male Iron Elbow 

10th July 2013 

40CXMIEL‐ 1616x90 

VELPEX  VELPEX DN16 ‐ 1/2 Inch X 90mm Wall Plated Extended Male Iron Elbow 

10th July 2013 

40CXMIEL‐ 1616x150 

VELPEX  VELPEX DN16 ‐ 1/2 Inch X 150mm Wall Plated Extended Male Iron Elbow 

10th July 2013 

40CXMIEL‐ 1616x180 

VELPEX  VELPEX DN16 ‐ 1/2 Inch X 180mm Wall Plated Extended Male Iron Elbow 

10th July 2013 

40CXMIEL‐ 2016x90 

VELPEX  VELPEX DN20 ‐ 1/2 Inch X 90mm Wall Plated Extended Male Iron Elbow 

10th July 2013 

40CXMIEL‐ 2020x90 

VELPEX  VELPEX DN20 ‐ 3/4 Inch X 90mm Wall Plated Extended Male Iron Elbow 

10th July 2013 

40CXMIEL‐ 2020x180 

VELPEX  VELPEX DN20 ‐ 3/4 Inch X 180mm Wall Plated Extended Male Iron Elbow 

10th July 2013 

40CXLEC‐ 16  VELPEX  VELPEX  DN16 End Cap  10th July 2013 

40CXLEC‐ 20  VELPEX  VELPEX  DN20 End Cap  10th July 2013 

40CXLEC‐ 25  VELPEX  VELPEX  DN25 End Cap  10th July 2013 

Page 5: AMI-FRM-0040 - ISO Type 5 Certificate of Conformity Template · (ISO 17484-1:2006, MOD) Evaluated to: The ISO Type 5 licensee shall comply with all the terms and conditions as stipulated

 

       Page 4 of 4 

 

Model Id Model Name 

Brand Name 

Product Description Endorsement 

Date 

40CXLEC‐ 32  VELPEX  VELPEX  DN32 End Cap  10th July 2013 

40CXLLNA‐ 1616  VELPEX  VELPEX  DN16 ‐ 1/2 Inch Loose Nut Adaptor  10th July 2013 

40CXLLNA‐ 2020  VELPEX  VELPEX  DN20 ‐ 3/4 Inch Loose Nut Adaptor  10th July 2013 

40CXLCOPA‐16  VELPEX  VELPEX  DN16 ‐ 1/2 Inch Copper Flared Adaptor  10th July 2013 

40CXLCOPA‐20  VELPEX  VELPEX  DN20 ‐ 3/4 Inch Copper Flared Adaptor  10th July 2013 

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ End of record _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Certificate No: AMI 74520

The models identified above in the schedule are endorsed for ISO Type 5 application only.