american made galvanized steel panels - Barn Pros...Our outdoor riding arenas are the perfect option for maximizing your enclosed riding space. Dura-ble and simple to assemble, these

Our outdoor riding arenas are the perfect option for maximizing your enclosed riding space. Dura-ble and simple to assemble, these complete packages include panels, posts, clamps, swing gate and latch. Whether you are doing pleasure, dressage, reining, roping or anything in-between, our arena tops the competition in both safety and quality. Our pre-configured sizes make for an easy, well-thought out install, allowing you to have more time riding and less time setting up.

The American-made galvanized steel tubing forms 10’ to 20’ wide by 5’ high, 5-rail panels, which clamp together with only a 3/8” inch gap to reduce the chance of hang-ups between posts. Smooth, capped panels and fully-welded joints keep out the weather and are sealed to further resist rust, ensuring consistent performance for years to come. Each includes a 12’ wide swing gate matched to the surrounding panels. Arena packages also come with line and gate posts, gates and latches.

Sizes Available: 60’ x 120’, 72’ x 120’, 80’ x 140’, 120’ x 220’

Packages include:

• Line Posts: used for inline fence support post. 2 3/8” round galvanized steel pipe designed to be set in line with fence panels utilizing our unique panel to post clamp. Available in 7’ lengths and includes weld-on cap and four panel to post clamps (2 3/8” x 1 5/8”).

• Hinge/Strike Posts: 2 7/8” round galvanized steel pipe with extra heavy wall for gate hinge. Available in 8’ lengths and includes cap and three panel to post clamps (2 7/8” x 1 5/8”).

• Horseshoe Latch: comes standard on all gates. It is placed on the right side unless other-wise specified.

• Swing Gate: each arena comes standard with a 12’ wide, 5 rail swing gate.

• Five Rail 10’ to 20’ wide, 5’ high Panels

Outdoor Riding Arenaa m e ri c a n m a d e g a lva n i z e d s t e e l pa n e l s

Barn Pros, Inc. / 14567 169th Dr. SE, Monroe, WA 98272 / Ph: 866-844-2276 / www.BarnPros.com

Call for a shipping quote: 866-844-2276Email inquiries: [email protected] information online at: http://www.barnpros.com/store

CAPS (fig. 2): All panels are capped along the top rail. All gates are capped on top and bottom rail. Our weld-on caps prevent injury and enhance appearance.

CORNERS (fig. 1): Top corners are squared, not rounded or curved. This eliminates the chance that livestock may hang a leg in between panels where they are joined.

JOINTS: Joints are notched and welded all the way around for maximum strength and a smooth fin-ish. This process eliminates moisture from penetrating rails and causing damage.

UPRIGHTS (fig. 4): Vertical uprights are built using the same material as rails - each upright goes clear to the ground for SUPERIOR SUPPORT. Uprights are spaced evenly throughout the panel, never go-ing over 6’ without a vertical upright.

CLAMPS (fig. 3): Panels are attached with a galvanized panel clamp assembly (included). This system leaves only a 3/8” gap between panels. The rigidity of this clamp system also will not allow panels to move and rattle or clang when in use like a pin attachment or chain attachment system.

Outdoor Riding Arenas t e e l pa n e l s , c l a m p s , g at e a n d p o s t s


Call for a shipping quote: 866-844-2276Email inquiries: [email protected] information online at: http://bit.ly/BarnProsHoofGrid

f.2

f.3f.4

f.1



60’ x 120’ Outdoor Riding Arena










Documents

american made galvanized steel panels - Barn Pros...Our outdoor riding arenas are the perfect option for maximizing your enclosed riding space. Dura-ble and simple to assemble, these