Embed Size (px)
Citation preview
Page 1 of 3
AMAN KUMAR Address: Flat No 301, Plot No. 306, sangam gali, New Ashok Nagar, New Delhi - 110096
Contact: +91 9871722697; E-mail: [email protected] ; D.O.B: 4th October 1987
SUMMARY
� 4+ years of experience in HSE Design mainly in the field of Offshore, LNG, Onshore & Refinery.
� Projects involved are LNG - Detailed Feasibility Study & Detailed Proposal, Offshore – Detailed Engineering & Proposals,
Onshore – Oil & Gas Processing Terminal (LSTK, FEED & ITB), Refinery – FEED & Detailed Engineering.
TECHNICAL SKILLS
� Design of Fire Protection & Fire Prevention Systems.
� Surge Analysis for fire water network using Pipenet “Transient Module.”
� Fire Suppression System.
� Prepare Fire water hydraulic calculations using PIPEnet.
� Fire Protection system for Buildings.
� Developing detailed PID’s for fire water network including pumps for complex oil & gas terminals & refineries.
� Specifications for Fire Fighting Systems.
� Thermal Radiation & Dispersion modelling.
� F&G Mapping Study.
� Inherent Process Safety.
� HAZOP & HAZID workshop.
� Engineering Software’s - PHAST, Pipenet (Network, Spray/sprinkler & Transient Modules).
EDUCATIONAL CREDENTIALS
M. Tech (Health Safety Environment Engineering), 2009-11
College of Engineering, University of Petroleum & Energy Studies, Dehradun.
B. Tech (Chemical Engineering), 2005-09
Raja Balwant Sign College, Uttar Pradesh Technical University, Agra.
XIIth
, 2005
Asha Modern School, Saharanpur, C.B.S.E. Board, Saharanpur.
Xth
, 2003
Infant Jesus School, I.C.S.E. Board, Saharanpur.
PROFESSIONAL EXPERIENCE
Current Organisation: TECHNIP, Noida (April 2012 - Present)
DESIGNATION: Sr. Safety Design Engineer (HSE Design LEAD)
PROJECTS:-
� Project 1: Onshore Terminal for VA & S1 Development Project, ONGC, KAKINADA (Gas Processing Terminal).
� Type: LSTK – Ongoing
� Roles and responsibilities:
o Fire Protection & Suppression Design Basis.
o Fire and Gas Detection concept sketches/layout/ philosophies.
o Passive Fire Protection Layout/ Specifications/ Philosophies.
o Fire Water Demand Calculation.
o Hydraulic calculation of fire water network / spray system/ curtain system including design of pumping system using
Pipenet.
o Hydraulics for Sprinkler System design for Buildings including detailed sprinkler system layouts.
o Surge analysis for fire water pumping system using Pipenet “Transient Module.”
o Conceptual layout for fire water network.
o PID’s for complete Fire Water Network including automatic system for Fire water tanks & pumps.
o PID’s for automatic deluge system for fire water spray & curtain system.
Page 2 of 3
o Fire fighting equipment, personnel protection & safety signs layout.
o Hazardous Equipment Schedule/ Hazardous Area Classification Drawing.
o Preparation of Fire & Gas Cause & Effect Chart.
o QRA study for the process facility.
o F&G Mapping study for optimizing/verification of F&G Layout.
o HAZID & HAZOP Procedures.
o HAZID/ HAZOP workshop & preparation of HAZID Closeout Report.
o Definition of applicable standards/regulations for the project & receiving statuary approval like OISD & PESO for
safety design.
� Project 2: i. Reliance Benzene Recovery Unit Project, Jamnagar, Gujarat.
ii. Reliance Off-Gas Cracker Project, Jamnagar, Gujarat.
� Type: Detailed Engineering (EPCM Service) – Ongoing
� Roles and responsibilities: �
o Fire and Gas Detection concept sketches/layout/ philosophies.
o Fire Protection & Fire Zone Drawings/ Specifications/ Philosophies.
o Passive Fire Protection Layout/ Specifications/ Philosophies.
o Fire Water Demand Calculation.
o Prepare Fire water hydraulic calculations using Pipenet.
o Conceptual Fire Protection Equipment Layout.
o Fire fighting equipment, personnel protection & safety signs layout.
o Deluge detailed arrangement drawings/PIDs.
o Hazardous Equipment Schedule/ Hazardous Area Classification Drawing.
o Preparation of Fire & Gas Cause & Effect Chart.
� Project 3: PETRONET LNG Terminal, SIKKA, Dahej, Gujarat
� Type: Detailed Feasibility Study
� Roles and responsibilities: � �
o Detailed Consequence Analysis for Jetty & Terminal.
o Initial Environmental Examination (IEE) Report Review.
o Safety Concept/ Philosophy.
o Equipment layout review based on safety aspects.
o Fire water demand calculation.
o Hydraulic calculation & design of fire water network using Pipenet.
o Design of water spray fire protection systems.
o Fire protection & personnel protection drawing.
o Provision of passive fire protection.
o Preparation of equipment list for HSE equipment.
� Project 4: CRAIN India Limited.
i. Mangla Upgradation Project (Oil Processing Terminal).
ii. Raageshwari Field Development Project (Gas Processing Terminal)
� Type: FEED & ITT Package Preparation.
� Roles and responsibilities:
o Fire and Gas Detection Design Basis/ layout.
o Fire Protection & Prevention (Fire Suppression System) Design Basis.
o Passive Fire Protection Design Basis/ Drawings /layout.
o EPC Contractor HSE Design Scope of Work.
o Fire Water Demand Calculation.
o Perform adequacy & verification of existing Fire water network hydraulic calculations using Pipenet.
o Conceptual Fire Protection Equipment Layout.
o Hazardous Equipment Schedule/ Hazardous Area Classification Drawing.
o Preparation of Equipment List for HSE Equipment.
Page 3 of 3
� Project 5: Fujairah Refinery Project at Fujairah, UAE.
� Type: Detailed FEED.
� Roles and Responsibilities:
o Fire protection system design including fire water demand calculation.
o Fire protection & personnel protection drawing.
o Fire & Gas detector layout.
o Fire proofing schedule/ Drawing.
o Hazardous equipment schedule/ Hazardous area classification drawing.
o Fire Fighting Equipment list.
� Project 6: Design & Construction of Infrastructure for MICA Missiles Maintenance and Storage.
� Type: PMC services for FEED & Detail Engineering
� Roles and Responsibilities:
o Review of HSE Design deliverables.
o Fire Protection & Detection Design Basis.
o Fire Fighting System Design/ Drawing & PID’s.
o Fire Detector Drawings.
o Sprinkler system design for High Hazardous Buildings.
� Detailed Proposals Undertaken:
o LNG:
- PETRONET - LNG Regasification at Dahej, Gujarat.
o Offshore:
- ONGC- BCPA-3, Bassein Development Platform, Mumbai.
- ONGC - Heera Re-Development Platform (HRD, Phase-II), Mumbai.
- ONGC - HRP & B-127 Cluster offshore well platform, Mumbai.
o Onshore:
- ONGC – Mehsana Gas Gathering Station Proposal at Mehsana, Gujarat.
Previous Organisation: L&T Valdel Pvt. Ltd., Bangalore (July 2011 – April 2012)
DESIGNATION: Safety Design Engineer
PROJECTS:-
� Project 1: PTTEPI Offshore Project, Myanmar.
� Type: - Detail Engineering
� Roles and Responsibilities:-
o Thermal Radiation and Dispersion Modelling for flare stack using DNV-PHAST Software version 6.7.
o Develop Safety Concept/Philosophy.
o Hazardous Equipment Schedule/ Hazardous Area Classification.
o Escape routes and fire fighting equipment’s layouts.
o Design of Fire Water Spray system using PIPENET software version 1.3.
o HAZOP & HAZID workshop & recommendation closeout.
o Safety Studies review:
- Escape, Evacuation and Rescue Analysis Report (EERA).
- Fire and Explosion Risk Analysis Report (FERA).
- Quantitative Risk Analysis (QRA) including Bow-Tie Diagram.
- Reliability Availability and Maintainability (RAM).
- Dropped Object Study.
� Project 2: ADMA-OPCO Offshore Projects. i. UMM-LULU Full Field Development Project, Phase –II. ii. Satah-Al-Razboot Project.
� Type: - FEED Verification & Proposal
� Roles and Responsibilities:-
o Complete FEED verification including preparation and submission of Endorsement Reports.
