316 S.S.

304 S.S.

316 S.S. Gas

Carbon Steel

Efficient • Easy • Effortless

Our Fittings Really Bite!

The ideal solution for installing reticulation systems for critical applications. AISI 316L stainless steel guarantees high hygienic properties and corrosion resistance.

• Polished tube supplied as standard

• Europress Stainless Steel tubes are a longitudinal welded, thin walled annealed tube, produced from high alloy austenitic Cr-Ni-Mo steel (No. 1.4401 to DIN EN 10088 (AISI 316L)

Certification Europress 316L Stainless Steel Press Fit System has been certified for drinking water use by numerous national and international authorities.

Standard EPDM (Black) – suitable for compressed air, water, and general applications. Optional FKM (Green) – compatible with chemical and high temperature applications. Optional NBR (Red) – compatible with certain oils and chemicals. Optional HNBR (Yellow) – suitable for natural gas installations. Check with technical department for specialist applications.

Europress 316L Stainless Steel Press Fit System

Features

Technical Specifications

Choice of Sealing Rings

Available in O.D. tube sizes 15, 22, 28, 35, 42, 54, 76.1, 88.9, 108 Standard 16 Bar/232 psi Pressure Rating. Up to 40 Bar/580 psi available on application. Please refer to technical department

WatermarkAS 3688

AS 5200.053WMKA22265

ActivfireAS 4118.2.1VdS2344en

VdS2100-26en

Standard EPDM (Black) – suitable for compressed air, water, and general applications. Optional FKM (Green) – compatible with chemical and high temperature applications. Optional NBR (Red) – compatible with certain oils and chemicals. Optional HNBR (Yellow) – suitable for natural gas installations. Check with technical department for specialist applications.

Looking for the advantages of a stainless steel pipe system, without long and tedious installation time, hassles of hot work permits and dangers of welding with no added cost of consumables?

Now you have the answer!The Europress 316L Stainless Steel Press Fit System can offer you the corrosion resistant and hygienic washdown properties of traditional stainless steel systems and more:

• FAST – Modular system is up to 10 times faster than conventional welding

• SIMPLE – does not require skilled labour or hot work permits

• CONSISTENT – Pressing Tool ensures each press is the same every time – no uncertainty of weld integrity

• SAFE – makes it a lot easier to comply with OH&S Requirements, with no heavy tools, no fire hazard, no mess

• COST EFFECTIVE – reduced installation time, no consumables or welding gas hire

• HYGIENIC – Polished stainless steel surface on tube, free from grease, oil and any corrosion aiding materials. Each tube comes capped for integrity.

• UNIQUE PRESS – each joint has a highly visible successful crimp indicator on fittings up to and INDICATOR including 54mm – don’t wait till it leaks to verify correct installation.

Applications• hot/cold water

• compressed air

• industrial gases

• chemical lines

• oil lines

• petroleum lines

• glycol

Industries• industrial

• manufacturing

• food and beverage

• pharmaceutical

• marine

• mining

• petroleum.

PEACE OF MIND…….Europress has the unique, innovative, “No Leak Solution”, which consists of a ‘PressCheck’ sleeve – a thin blue coloured plastic film applied to the outer seat of the o-ring. This plastic film tears when the fitting is pressed, and falls off, therefore any unpressed fittings are easily and quickly identified.

The Europress System offers all the advantages of a modular Press Fit System with the added benefit of the peace of mind ‘PRESS CHECK’ sleeve

NO LEAK SOLUTION

“ PressCheck” sleeve –peels off when seal is complete

Blue press check for S.S.(Red press check on carbon steelYellow press check for natural gas)

1. Cut tube to length

i-press tool with adaptorfor 76mm applications

2. De-burr internal and external of tube end

3. Witness mark insertion depth

4. Assemble tube and fitting

5. EuroPress! The fitting is secure in

under 10 seconds!

Ph 1300 625 562sales@allmach.com.au

Crimp tools should only be used by trained operators

INSTALLATION TOOLSThe Europress systems are installed using an ergonomic, lightweight cordless electromechanical pressing tool, with an ‘M’ Profile pressing jaw.

There are three models of the Europress tool available with several outstanding features• TB02 (Minitool) – this tool presses from 15mm to 28mm• TB05 (shown below)– this tool presses from 15mm to 54mm• TB08 – this tool presses from 15mm to 108mm

Bright LED illumination for working safety

Flexible and cost effective due to interchangeable standard pressing jaws

Tool information shown via LED display

Easy 1 handed operation

Effortless working due to low weight and ergonomic design

Head rotates to facilitate easy access

High-quality, powerful Makita Li-ion technology for lasting, battery-powered pressing

Special Features and Benefits• Quick press due to short pressing cycle

• Extremely short charging time of just 22 minutes

• Time saved when multiple pressing by means of automatic piston return

• Very high safety factor based on “Quickstop” function

• Worldwide availability i-press Makita batteries and chargers

• Precise pressing force due to HPC pressure monitoring with audible signal

• Long battery and tool service-life due to “Autostop” after the pressing operation

• Optional 240 volt adaptor means continuous pressing available

www.allmach.com.au