All-Round System Scaffold · All-Round System Scaffold Scaffold Gold Inc. All-Round System Component Manual

All-Round System Scaffold

Scaffold Gold Inc. www.scaffoldgold.com

All-Round System Component Manual

Introduction

Ledger

Transom

Bay Brace

Side Bracket

Double Head Side Bracket

Standard

Screw Jack / Swivel Jack

Double Ledger

Lattice Girder

Stair Stringer Set

Access Ladder & Ladder Bracket

Aluminum Plydeck

LVL Plank

Wedge Clamp / Aluminum Tube

Steel Plank

I-Beam

Aluminum Tube

Base Collar

Reinforcing Rod

Access Gate

Toe Board

A2 Clamp/D-Pin/Base Plate/I-Beam Clamp

Expanded Metal Grid Mesh (Galvanized )

Steel Rack

Information

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

26

TABLE OF CONTENT

Please consider the environment before printing this paper. © 2012 SGI All Rights Reserved P 2

Scaffold Gold Inc.

9606 40th Street S.E.

Calgary, AB, Canada

T2C 2P3

Phone: 403-663-1380

Fax: 403-663-1739

Website: scaffoldgold.com

All-Round System Component Manual

All illustration, dimensions and weight contain in this manual for Scaffold Gold All-Round System are to be use for visual dimension and part recognition.


All-Round System Ledger

Ledger Length

Description

Standard Width Ledger Length Weight Part No.

m ft m ft kg lb

10 ‘ Ledger 3.05 10’ 3.00 9’10” 11.1 24.5 060201

7’ Ledger 2.13 7’ 2.08 6’10” 8.0 17.6 060202

5’ 2” Ledger 1.57 5’2” 1.52 5’ 6.1 13.4 060203

3’ 10” Ledger 1.15 3’10” 1.10 3’8” 4.6 10.1 060204

2’ 2” Ledger 0.65 2’2” .60 2’ 6.6 6.6 060205

Standard Width

Scaffold Gold Inc. All-Round System


All- Round System Transom

Description

Transom Length Transom Overall Length Weight Part No.

m ft m ft kg lb

7’ Transom 2.13 7’ 2.21 7’2” 9.0 19.8 060301

5’ 2” Transom 1.57 5’2” 1.65 5’4” 7.0 15.4 060302

3’ 10” Transom 1.15 3’10” 1.23 4’ 5.5 12.1 060303

2” 2” Transom 0.65 2’2” .73 2’4” 4.5 9.9 060304

Transom Length

Transom Overall Length



Bolt to Bolt

Size m ft

10’ 3.52 11’6”

7’ 2.81 9’3”

5’2” 2.45 8’

3’10” 2.23 7’4”

All- Round System Bay Brace

Standard Width

Description

Standard Width Overall Length Weight Part No.

m ft m ft kg lb

10 ‘ Bay Brace 3.05 10’ 3.68 12’ 1” 9.4 20.7 060401

7’ Bay Brace 2.13 7’ 2.96 9’ 9” 7.9 17.4 060402

5’ 2” Bay Brace 1.57 5’2” 2.60 8’ 7” 6.9 15.2 060403

3’ 10” Bay Brace 1.15 3’10” 2.37 7’ 9” 6.6 14.5 060404

Bolt to Bolt

Overall Length


Standard Width

Bracket Length


All- Round System Side Bracket

Description

Bracket Length Standard Width Weight Part No.

m ft m ft kg lb

2’ 11” Side Bracket 0.88 2’11” 0.88 2’11” 10 22.4 060601

2’ 2” Side Bracket 0.65 2’2” 0.65 2’2” 7 15.4 060602



All- Round System Double Ledger Side Bracket

Description

Bracket Length Standard Width Weight Part No.

m ft m ft kg lb

3’ 10” Side Bracket 1.15 3’10” 1.15 3’10” 10 22.4 060603


Bracket Length

Standard Width


Description

Standard Length Standard Overall Length Weight Part No.

m ft m ft kg lb

3 m Standard 3.00 9’10” 3.15 10’4” 14.6 32.1 060101

2 m Standard 2.00 6’7” 2.15 7’1” 9.9 21.8 060102

1.5 m Standard 1.50 4’11” 1.65 5’5” 7.6 16.7 060103

1.0 m Standard 1.00 3’3” 1.15 3’9” 5.3 11.6 060104

0.50 m Standard .50 1’8” 0.65 2’2” 3.0 6.6 060105

All-Round Standard

Rosette View



Description

Maximum Extension Minimum Extension Overall Height Weight Part No.

m in m In m in kg lb

All-Round Screw Jack .38 15.0 .058 2 .53 21 7.6 17.0 060501

All-Round Swivel Jack .43 17.0 .13 3.5 .60 24 8.2 18.36 060502

All-Round Screw Jack & Swivel Jack M

inim

um

Ext

ensi

on

- M

axim

um

Ext

ensi

on

Ove

rall

Hei

ght

Ove

rall

Hei

ght

Min

imu

m E

xte

nsi

on

- M

axim

um

Ext

en

sio

n



All-Round Double Ledger

Description


m ft m ft kg lb

10 ‘ Double Ledger 3.05 10’ 3.68 12’ 1” 9.4 20.7 060701

7’ Double Ledger 2.13 7’ 2.96 9’ 9” 7.9 17.4 060702

Standard Width

Overall Length



All-Round Lattice Girder

Description


m ft m ft kg lb

28’ Lattice Girder 8.52 28’ 8.47 27’10” 96.0 211.2 060801

21’ Lattice Girder 6.39 21’ 6.34 20’10” 71.2 156.6 060802

17’ Lattice Girder 5.18 17’ 5.13 16’10” 59.0 129.8 060803

14’ Lattice Girder 4.26 14’ 4.21 13’10” 48.5 106.7 060804

Overall Length

Standard Width


Standard Width

Overall Length

Please consider the environment before printing this paper.

All- Round System Stair Stringer Set

Standard Width Stringer Length Weight Part No.

m ft m ft kg lb

2.13 7’ 2.99 9’10” 21.00 46.00 060901

Tread Width Slot Spacing Weight Part No.

m ft m ft kg lb

.81 32” .86 34” 7.4 16.3 060902

Standard Width

Tread Width

Slot Width

Description


m ft m ft kg lb

3’ 6” Stair Ledger 1.07 3’6” 1.04 3’4” 4.4 9.6 060903

© 2011 SGI All Rights Reserved P 12


P.6 P.4 Please consider the environment before printing this paper. © 2011 SGI All Rights Reserved P 13

All-Round Access Ladder & Ladder Bracket

Description

Ladder Height Ladder Width Weight Part #

m in m in kg lb

5’ Ladder 1.52 5’ .43 17” 6.5 14.3 061101

3’ Ladder .91 3’ .43 17” 4.2 9.24 061102

Height

Bracket Width Weight Part #

m in kg lb

.43 17” 3.0 6.6 061201


P.6 P.4 Please consider the environment before printing this paper. © 2011 SGI All Rights Reserved P 14

All-Round Aluminum Plydeck

Description Overall Length Effective Length Weight Part #

m in m in kg lb

10’ x 19” Aluminum Plydeck 3.11 10’’ 2” 3.05 10’ 18.22 40.17 070401

7’ x 19” Aluminum Plydeck 2.20 7’ 2” 2.13 7’ 13.24 29.19 070402



4’ Aluminum Plydeck





235 mm (9 ¼” )

41.28 mm (1 5/8”)

Description

Overall Length Weight Part #

m in kg lb

16’ LVL Plank 4.89 16’ 23.20 51.15 061509

12’ LVL Plank 3.66 12’ 17.4 38.4 061501

10’ LVL Plank 3.05 10’ 14.5 32.0 061502

8’ LVL Plank 2.44 8’ 11.6 25.6 061503

6’ LVL Plank 1.83 6’ 8.7 19.2 061504

5’ LVL Plank 1.52 5’ 7.3 16.0 061505

4’ LVL Plank 1.22 4’ 5.8 12.8 061506

3’ LVL Plank 0.91 3’ 4.4 9.60 061507

2’ LVL Plank 0.61 2’ 2.9 6.40 061508

LVL Plank



Aluminum Tube & Wedge Clamp

Description Slip Load (lb) Ultimate Load (lb) Weight Part #

kg lb

Right Angle Wedge Clamp 1.90” x 1.90”

4043 10078 1.5 3.3 061601

Swivel Wedge Clamp 1.90” x 1.90”

4137 7530 1.6 3.5 061602

Right Angle Wedge Clamp Swivel Wedge Clamp

Description Weight Part #

kg/ft lb/ft

Aluminum Tube ( lengths available upon request) 1.5 3.3 061801



Steel Plank

Description

Plank Length Overall Length Weight Part #

m in m in kg lb

10’ Steel Plank 3.05 10’ 3.11 10’2” 18.5 40.7 061701

7’ Steel Plank 2.13 7’ 2.19 7’2” 13.0 28.6 061702

5’ 2” Steel Plank 1.57 5’2” 1.63 5’4” 10.5 10.5 061703

3’ 10” Steel Plank 1.15 3’10” 1.21 4’0” 7.20 7.20 061704

2’ 2” Steel Plank 0.65 2’2” 0.71 2’4” 5.20 5.20 061705

Overall Length

Plank Length

69.90 mm ( 3” )


Description Weight Part # Description Weight Part #

kg lb kg lb

Aluminum I-Beam 6.5”(6’) 10.00 22.05 010406 Aluminum I-Beam 7.5” (12’) 27.60 60.85 010512


Aluminum I-Beam 6.5”(10’6’’) 17.50 38.14 0104106 Aluminum I-Beam 7.5” (16’) 36.80 81.13 010516





Aluminum I-Beam 6.5”(20’) 33.00 72.75 010420

Aluminum I-Beam 6.5”(22’) 36.70 80.91 010422

Aluminum I-Beam 6.5”(24’) 40.20 88.63 010424


Aluminum I-Beam 6 ½ “ & 7 ½ “

Scaffold Gold Inc. F360 Formwork System


Reinforcing Rod

Overall Length Rosette Spacing Weight Part #

m in m in kg lb

0.6 23” 0.5 19.68 3.2 7.05 061805



m in kg lb

1.64 5’5” 7.8 17.5 061303


m in kg lb

1.09 3’7” 10.0 22.4 061302

0.50 m

Overall Length

0.50 m

0.50 m

Overall Length

Access Gate & Guardrail Standard

Please consider the environment before printing this paper.

Base Plate


All-Round System Accessories

Description

Weight Part #

kg lb

Base Collar 1.9 4.1 061804

Description

Weight Part #

kg lb

D-Pin .10 .22 061802

Description

Weight Part #

kg lb

Base Plate 1.8 3.97 061806

Description

Weight Part #

kg lb

I-Beam Clamp 1.5 3.31 061803


Description

Steel Toe Board Length Weight Part No.

m In kg lb

4’ Steel Toe Board .30 m 3’10” .59 1.30 062101

5’ Steel Toe Board .61 m 5’2” 1.17 2.58 062102

7’ Steel Toe Board 1.22 m 7’ 2.34 5.16 062103

10’ Steel Toe Board 1.52 m 10’ 2.93 6.46 062104


Steel Toe Board


Description Weight (kg) Part No.

kg lb

1’ x 4’ Grid Mesh 4.50 9.92 080301

2’ x 2’ Grid Mesh 4.50 9.92 080302

2’ x 4’ Grid Mesh 9.50 20.94 080303

4’ x 4’ Grid Mesh 18.5 40.78 080304

© 2011 SGI All Rights Reserved P 23 Please consider the environment before printing this paper.

Expanded Metal Grid Mesh


© 2012 SGI All Rights Reserved P 24 Please consider the environment before printing this paper.

Description Weight Part #

kg lb

Steel Rack 35.00 77.16 080202

Steel Rack


Denotes Centerline of Horizontals or Verticals Material

c

Symbol Legend

WARNING

THIS DOCUMENT IS INTENDED FOR USE BY EXPERIENCE SCAFFOLD

ENGINEERS. USE BY UNQUALIFIED PERSONS MAY RESULT IN DEATH,

SERIOUS PERSONAL INJURY OR PROPERTY DAMAGE.

LOADING INFORMATION CONTAINED IN THIS DOCUMENT IS

BASED UPON THE LOAD-CARRYING CAPACITY OF THE INDIVIDUAL

COMPONENTS. THE TOTAL LOADS (COMPONENT WEIGHT, PLANK

WEIGHT, LIVE LOAD, MATERIAL LOAD, WIND LOAD, ETC.) TO BE

IMPOSED ON THE COMPLETE ASSEMBLY MUST BE CONSIDERED. ALL

LOADS ON INDIVIDUAL MEMBERS ARE TRANSMITTED TO OTHER

WARNING ALL ARREST EQUIPMENT ATTACHED TO SCAFFOLD MAY NOT PREVENT SERIOUS INJURY OR DEATH IF A FALL OCCURS.

WARNING SERIOUS INJURY OR DEATH CAN RESULT FROM YOUR FAILURE TO FAMILIARIZE YOURSELF, AND COMPLY WITH ALL APPLICABLE SAFETY REQUIREMENTS OF PROVINCIAL REGULATIONS BEFORE ERECTING, USING OR DISMANTLING THIS SCAFFOLD.

Conversion Chart

This manual is based on metric dimensions. All Imperial

dimensions have been rounded to the nearest inch for

reference purposes only. When adding dimensions, use the

metric dimension.

Below are recommended Conversion Factors.

Metric Unit

Millimeters (mm)

Meters (m)

Kilograms (kg)

Kilo Newtons (kN)

Kilo newton /

meter2 (kN/m2)

Conversion Factor

0.03937

3.28084

2.20462

224.8089

20.8854

Imperial Unit

Inch (in)

Feet (ft)

Pounds (lb)

Pounds (lb)

Pound/foot2(psf)

Converting Metric to Imperial

(Metric Unit) x (Conversion Factor) = (Imperial Unit)

Example: 15 mm x 0.03937 = 0.59 in

Converting Imperial to Metric

(Imperial Unit) ÷ (Conversion Factor) = (Metric Unit)

Example: 10ft ÷ 3.28084 = 3.05 m

All drawings in this guide are for illustrative purposes only. This guide

This document is subject to periodic revision and updating. Before designing scaffolds with SGI components, refer to this document on www.scaffoldgold.com to be sure you are using the most current revision. Contact SGI for all scaffold loading not covered in this document.

THIS DOCUMENT IS NOT TO BE REPRODUCED IN PART OR

IN WHOLE.

is intended for general information purposes only. Because of the

many variables which affect the performance of the product line,

some of the information in this brochure may not apply. For specific

applications, contact SGI. Note: All scaffolds shall be erected,

modified and dismantled only under the supervision of a Competent

Person. Erection, use, maintenance and disassembly must conform to

current manufacturer’s instructions as well as all federal, state,

provincial and local regulations. Copies of complete SGI Guidelines

for these and other purposes are available from SGI without charge.

http://www.scaffoldgold.com/

9606 40th Street SE

Calgary,Alberta

T2C-2P3 , CANADA

Toll-Free:1-877-569-Gold (4653)

Tel:

Fax:

403-663-1380

403-663-1739

HEAD OFFICE

HarrisonTse

General Manager

Email:

Cell:

[email protected]

403-399-3896

Address Telephone Technical Support

Address Telephone

P 91


MANUFACTURE

Buxi Industrial Park

ShuibuTown,

Guangdong,China.

Scaffold Gold Inc.

www.scaffolgold.com

P.6 P.4 © 2011 SGI All Rights Reserved Please consider the environment before printing this paper.

Documents

All-Round System Scaffold · All-Round System Scaffold Scaffold Gold Inc. All-Round System Component Manual