ALL-PRO - Cooper Industries 4 COOPERLIGHTING THE ALL-PRO ADVANTAGE Full Line of Housings •4",5",6"ApertureSizes •NewConstruction •AIR-TITE™ …

RECESSED LIGHTINGTHE ALL-PRO ADVANTAGE

ALL-PRO

ALL-PRO

COOPER LIGHTING2

ALL-PRO housings and trims are available in a varietyof sizes ideal for any room of the house. Differentstyle trims provide almost any desired lighting effect.

ALL-PRO housings are available to solve speciallighting situations such as sloped ceilings. Thesehousings allow the light to be aimed straight downregardless of ceiling pitch.

TABLE OF CONTENTS

The All Pro Advantage..........................................................4-74" Line Voltage Housings and Trims ..................................8-134" Low Voltage Housings and Trims ................................14-195" Housings and Trims.....................................................20-296" IC Housings and Trims ................................................30-416" Non IC Housings and Trims.........................................42-536" IC “Universal” Housings and Trims .............................54-646" IC Shallow Ceiling Housings and Trims.......................65-716" Non-IC Shallow Ceiling Housings and Trims...............72-776" Slope Ceiling Housings and Trims...............................78-81Numerical Index.....................................................................82

COOPER LIGHTING

ALL-PRO

3

Conserve heating and air conditioning costs by usingIC rated ALL-PRO housings that maintain an unbro-ken insulation barrier. IC AIR-TITE housings and trimsalso minimize drafts and prevent moisture damage inunconditioned attic spaces.

ALL-PRO remodel housings can be installed frombelow the ceiling in existing ceilings. Cut a hole in theceiling using the template provided, bring power tofixture with flexible cable, make wiring connectionsand install housing.

ALL-PRO new construction housings are designedfor installation in new construction or in existing ceil-ings where there is access above the ceiling. Hangerbars include a pre-installed nail and junction boxesare equipped with push-in wire connectors to simplifyinstallation.

ALL-PRO

COOPER LIGHTING4

THE ALL-PRO ADVANTAGE

Full Line of Housings• 4", 5", 6" Aperture Sizes • New Construction• AIR-TITE™ • Slope Ceiling• Remodel • Insulated Ceiling• Non-IC • “No-Socket-Bracket”• Shallow Ceiling • Low Voltage

ALL-NAIL Bar Hanger• Bar hangers have pre-installed nails.• Bar hangers are pre-installed on housings.• Integral T-Grid ceiling clip - No additional clips needed.• Bar hangers can be re-oriented 90°.• Bar hangers can be shortened without tools.

COOPER LIGHTING

ALL-PRO

5


Locking Screw & Multiple Crimp Points• Patented regressed screw locks hanger bars in position -regressed design does not interfere with ceiling material.

• Screw can be tightened with slotted or phillips screwdriver ornut driver.

• Five bar hanger locking points on the housing allow thedownlight to stay in place during drywalling.

Push-In Wire Connectors• Push-in wire connectors speed installation - simply strip andinsert supply wires into connectors. No additional wire nutsare required.

• Standard on every ALL-PRO housing.• Integral wire traps for non-metallic sheathed cable - no addi-tional connectors necessary.

• Knockouts for metallic cable and rigid conduit connectors.• Rated for through branch circuit wiring.

ALL-PRO

COOPER LIGHTING6

LISTINGS AND CODES• ALL-PRO housings and trims are UL and cUL listed inappropriate categories

• Wide choice of AIR-TITE housings and trims to meet statecodes as qualified per test standard ASTM-E283.

• Meets AIR-TITE Code standards of:- California Title 24- IEEC- New York - ECC- Washington State EC

• ALL-PRO housings and trims are pat of the Cooper Lightingfamily of products

“No-Socket-Bracket” System• “No-Socket-Bracket” housings and socket supporting trimsspeed installation of multiple units.

• Provides consistent lamp position in multiple units.


COOPER LIGHTING

ALL-PRO

7

Wide Trim Selection• Trim retention system choices include:

- Torsion springs - Friction clips - Coil springs• Many trims available in choice of torsion springs or frictionclips.

Contractor Friendly Trim Rings• All-Pro trims feature an extra wide trim ring.• Helps hide any cutout irregularities.• ERT707 and ERT709 trims in white and black baffle includeboth narrow style and wide style trim ring - use one, discardthe other.

High Gloss Appliance White Finish• Fingerprints don’t show.• Easy to clean.• Matches appliances.• Matches electrical devices - wall plates, switches etc.


ALL-PRO

COOPER LIGHTING8

ET400

The ET400 is designed for use with small aperture trims.Theshallow height allows it to be used in spaces where verticalheight is limited.The ET400 can be installed in newconstruction or where there is access above the ceiling.

Housing: Die-stamped 20 gauge CRS with gray powder coatfinish.

Plaster Frame: Housing is secured in plaster frame with springbarbs.The housing can be adjusted in the plaster frame toadjust for different ceiling materials.The housing can beremoved from the plaster frame to provide access to thejunction box.

Junction Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Four conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.

Bar Hangers: Pre-installed, captive bar hangers allow housingto be positioned at any point within a 24" joist span. Score linesprovided for easy shortening for 12” joists. Integral nailsimplifies installation. Bar hangers can be repositioned 90°.IntegralT-bar clip snaps ontoT-bar spline for quick alignment.

Socket: Fixed position porcelain socket with nickel plated brassscrew shell provides consistent lamp positioning. Shippinginsert protects socket from overspray.

Thermal Protector: Self resetting thermal protector deactivatesfixture if overheating occurs due to improper lamping ormisapplied insulation.

Labels: • UL/cUL Listed for Damp location• UL/cUL Listed for FeedThrough• IP rated for select trims

5-1/4"[133mm]

5"[127mm]

1/2"[13mm]

4-1/2"[114mm]

8"[203mm]

4" Ape rtu re

Non - IC Hous ingfo r Use InUn insu l a tedCe i l i ngs

Any Insu l a t i onP resen t Mus t BeKep t 3 " FromHous ing

COOPER LIGHTING

ALL-PRO

9

ET400R

The ET400 is designed for use with small aperture trims.Theshallow height allows it to be used in spaces where verticalheight is limited.The ET400R can be installed from below theceiling.


Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four “NM” (non-metallic) cable pryouts with integralstrain relief also included. Quick-connect wiring connectorsincluded.

Socket : Fixed position porcelain socket with nickel platedbrass screw shell provides consistent lamp positioning.Shipping insert protects socket against overspray

Remodel C l ips : Four remodel clips secure housing andaccommodate 1/2" and 5/8" ceiling thickness.

Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping or misapplied insulation.

Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough

11-1/2"[292mm]

4-5/8"[116mm]

5"[127mm]

1/2"[13mm]4-1/4"

[108mm]

4" Ape rtu re



ALL-PRO

COOPER LIGHTING10

EI400AT

5-1/4"[133mm]

8"[203mm]

4-1/2"[114mm]

4-7/8"[124mm]

The EI400AT is a small aperture housing for providing accentand task lighting.The EI400AT is designed for use in insulatedceilings where it will be in direct contact with insulation. It is anAIR-TITE housing designed to prevent air flow between livingspaces and unconditioned attic areas.

4" Ape rtu re

IC A IR -T ITEHous ing fo rI n su l a tedCe i l i ngs

COOPER LIGHTING

ALL-PRO

11

Housing: Double wall aluminum construction helps dissipateheat. Housing is secured in plaster frame with spring barbs.Theinner housing can be adjusted in the plaster frame tocompensate for different ceiling materials.

Plaster Frame: Galvanized steel construction.The innerhousing can be removed from the plaster frame to provide accessto the junction box. Plaster frame includes locking screws forhanger bars and cutouts for crimping hanger bars in position.

Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Sevenconduit knockouts are uniform 1/2" size with true pryout slots.Four “NM” (non-metallic) cable pryouts with integral strainrelief also included. Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.Score lines provided for easy shortening for 12” joists. Integralnail simplifies installation. Bar hangers can be repositioned 90°.IntegralT-bar clip snaps ontoT-bar spline for quick alignment.

Socket : Fixed position porcelain socket with nickel platedbrass screw shell provides consistent lamp positioning.Shipping insert protects socket from overspray.

Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping.

Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulationand combustible material

Meets following restricted air flow and IC requirements:• State of CaliforniaTitle 24 Low Efficacy IC andAT requirements

• Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy ConservationConstruction Code (NY-ECCC)

• Certified Under ASTM-E283

ALL-PRO

COOPER LIGHTING

Clear Specular Ref lector

ET400ET400R

40W R16, 40W A19, 50WPAR20, 50W R20

EI400AT 50W R20, 50W PAR20

ET400ET400R

50W PAR20, 50W R20

EI400AT35W R20 (50W PAR20,50W R20 with H1999

socket extender)

2-1/2"[63mm]

1-1/8"[28mm]

5"[127mm]

Trims For ET400, ET400R, EI400AT

ERT403High Gloss ApplianceWhiteTrimwith Clear Specular Reflector

12

ERT401High Gloss ApplianceWhiteTrimRing with Black Baffle

ERT401WHTHigh Gloss ApplianceWhiteTrimRing withWhite Baffle

Plast ic Baff le

5"[127mm]

COOPER LIGHTING

ALL-PRO

Metal Baff le

Lamps for ERT413WHT:

Lamps for ERT413:

OD

H

ET400ET400REI400AT

40W R16, 40W A19,50W PAR20, 50W R20

5"[127mm]


ET400ET400R

40W R16, 60W PAR16

EI400AT 40W R16

ET400EI400AT

45W R20, 40W A19,50W PAR20, 50W R20

ET400R 40W A19, 50W R20,50W PAR20

13

4-3/8"[111mm]

ERT413High Gloss ApplianceWhiteTrimRing with Black Baffle

ERT413WHTHigh Gloss ApplianceWhiteTrimRing withWhite Baffle

Eyebal l - 30 ˚ T i l t

ERT402High Gloss ApplianceWhiteTrimRing withWhite Eyeball

Aperture:2-1/8" [54mm]

OD:5" [127mm]

ALL-PRO

COOPER LIGHTING14

ET400LV

4" Ape rtu re

Non - IC Hous ing fo rUse In Un insu l a tedCe i l i ngs

Any Insu l a t i onP resen t Mus t Be Kep t3 " From Hous ing

12V Low Vo l t ageMR16 Lamp

5-1/4"[133mm]

8"[203mm]

5"[127mm]

4-1/2"[114mm]

1/2"[13mm]

The ET400LV is a small aperture low voltage housing forproviding accent and task lighting.The ET400LV is designedfor use in non-insulated ceiling or for insulated ceilings butinsulation must be kept 3" from all sides of the housing.


Plaster Frame: Housing is secured in plaster frame withspring barbs.The housing can be adjusted in the plaster frameto adjust for different ceiling materials.The housing can be re-moved from the plaster frame to provide access to the junctionbox.

Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Four conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.

Socket : Ceramic socket with reflector for bi-pin MR16 lamps.

Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.Score lines provided for easy shortening for 12” joists. Integralnail simplifies installation. Bar hangers can be repositioned 90°.Hangers fit ontoT-bar spline for quick alignment.

Transformer : 120V Integral magnetic transformer steps linevoltage down to lamp operating voltage. For MR16 lamps up to50W.

Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping ormisapplied insulation.

Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• IP Listed

COOPER LIGHTING

ALL-PRO

15

ET400LVR

4" Ape rtu re


Any Insu l a t i onP resen t Mus t BeKep t 3 " From Hous ing

12V Low Vo l t age MR16Lamp

4-5/8"[118mm]

5"[127mm]

1/2"[13mm]

4-1/4"[108mm]

The ET400LVR is a small aperture low voltage remodel housingfor providing accent and task lighting.The ET400LVR is designedfor use in non-insulated existing ceiling or for insulated ceilingsbut insulation must be kept 3" from all sides of the housing. Itcan be installed from below the ceiling.


Junct ion Box: U.L. listed for through branch circuit wiring. Sixconduit knockouts are uniform 1/2" size with true pryout slots.Four “NM” (non-metallic) cable pryouts with integral strain re-lief also included. Quick-connect wiring connectors included.

Socket : Ceramic socket with reflector disc for bi-pin MR16lamps.


Transformer : 120V integral magnetic transformer steps linevoltage down to lamp operating voltage. For MR16 lamps up to50W.

Support : Helps support weight of junction box andtransformer. Threaded stem can be adjusted for varyingceiling thicknesses.

Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping ormisapplied insulation.

Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough

13-1/2"[343mm]

ALL-PRO

COOPER LIGHTING16

EI400LVAT

4" Ape rtu re

IC A IR -T ITE Hous -i ng fo r I n su l a tedCe i l i ngs

12V Low Vo l t ageMR16 Lamp

9-1/2"[140mm]

7-1/8"[181mm]

7-3/8"[187mm]

1/2"[13mm]

13"[300mm]

4-1/2"[114mm]

The EI400LVAT housing has an integral low voltagetransformer that supplies 12 volts to MR16 lamps. It can beused in ceilings where it will be in direct contact withinsulation.The EI400LVAT is suited for use in insulated ceilingsin residential and commercial applications. It is an AIR-TITEhousing designed to prevent air flow between living spacesand unconditioned attic spaces.

COOPER LIGHTING

ALL-PRO

17

Housing: Double wall aluminum construction for greater heatdissipation. EI400LVAT housing is gasketed to prevent airflowfrom heated or air conditioned spaces.

Plaster Frame: Inner housing adjusts in plaster frame forceilings up to 1" thick. Includes locking screws for hanger barsand cutouts for crimping hanger bars in position.


Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.Score lines provided for easy shortening for 12” joists. Integralnail simplifies installation. Bar hangers can be repositioned 90°.Hangers fit ontoT-bar spline for quick alignment.

Transformer : 120V integral magnetic transformer steps linevoltage down to lamp operating voltage.

Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping.

Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact withInsulation and combustible material

Meets following requirements:

• State of CaliforniaTitle 24 Low Efficacy ICand AirTite

•Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy ConservationConstruction Code (NY-ECCC)


ALL-PRO

COOPER LIGHTING

Specular Ref lector• “Cat’s paw” retention spring

Baff le• “Cat’s paw” retention spring

ET400LVET400LVRET400LVAT

12V 50W MR16

1-1/4"[31mm]

1-1/4"[31mm]

5"[127mm]

5"[127mm]

Trims For ET400LV, ET400LVR, EI400LVAT

ERT403LVHigh Gloss ApplianceWhiteTrimwith Clear Specular Reflector

18

ERT403LVGHigh Gloss ApplianceWhiteTrim with Gold Reflector

ERT401LVWHigh Gloss ApplianceWhiteTrim withWhite Baffle

ERT401LVHigh Gloss ApplianceWhiteTrim with Black baffle


12V 50W MR16

COOPER LIGHTING

ALL-PROTrims For ET400LV, ET400LVR, EI400LVAT

19


12V 50W MR16

Eyebal l - 30° T i l t• “Cat’s paw” retention spring

Slot Aperture• “Cat’s paw” retention spring

Aperture:2" [51mm]

OD:5" [127mm]

ERT402LVHigh Gloss ApplianceWhiteTrimwithWhite Eyeball

ERT404LVHigh Gloss ApplianceWhiteTrimand Slot


12V 50W MR16

Slot:1-3/8" x 2-1/8"[35mm x 54mm]

OD:5" [127mm]OD

ALL-PRO

COOPER LIGHTING20

ET500

5" Ape rtu re



7"[178mm]

7"[178mm]

1/2"[13mm]

5-3/4"[146mm]

10-1/2"[267mm]

The ALL-PRO ET500 has a 5" aperture designed for PAR20 andPAR30 halogen lamps.The 5" diameter trim size makes thisseries the right choice for applications where dramatic yetinconspicuous lighting is required and higher wattages aredesired. If the ET500 is used in insulated ceilings, insulationmust be kept 3" from all sides of fixture.

Housing: Die-stamped 22 gauge CRS with white powder coatfinish. Housing adjusts in plaster frame to accommodateceiling up to 1-3/8" thick.

Plaster Frame: Galvanized steel construction.The housingcan be removed from plaster frame to provide access to thejunction box. Regressed locking screw for securing hangerbars. Cutouts for easily crimping hanger bars in position


Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.Score lines provided for easy shortening for 12" joists. Integralnail simplifies installation. Bar hangers reposition 90°. IntegralT-bar clip snaps ontoT-bar spline for quick alignment.

Socket :Porcelain socket with nickel plated brass screw shellsnaps into trim for consistent lamp positioning. Shipping insertprotects socket from overspray.

Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping or incorrect application of insulation material.

Labels • UL/cUL listed for Damp Location• UL/cUL listed for FeedThrough• IP Rated

COOPER LIGHTING

ALL-PRO

21

ET500R

5" Ape rtu re



6"[152mm]

1/2"[13mm]

14"[356mm]

5-1/2"[140mm]

The ALL-PRO ET500R remodel housing has a 5" aperturedesigned for PAR20 and PAR30 halogen lamps.The five inch"diameter trim size makes this series the right choice forapplications where dramatic yet inconspicuous lighting isrequired and higher wattages are desired. If the ET500R is usedin insulated ceilings, insulation must be kept 3" from all sidesof fixture.The ET500R can be installed from below the ceiling.

Housing: Die-stamped 22 gauge CRS with white powder coatfinish. Housing will slip through 5-1/2" ceiling opening. Integralflange secures fixture against ceiling.

Remodel C l ips : Four remodel clips secure housing and ac-commodate 1/2" and 5/8" ceiling thickness.


Socket : Porcelain socket with nickel plated brass screw shell,snaps into trim for consistent lamp positioning. Shipping insertprotects socket from overspray.

Thermal Protector : Self resetting thermal protectordeactivates fixture if an incorrect lamp is used or if ceilinginsulation material is not applied correctly.

Labels : • UL/cUL listed for damp location• UL/cUL listed for FeedThrough• IP Rated

ALL-PRO

COOPER LIGHTING22

EI500AT

5" Ape rtu re


7"[178mm]

7"[178mm]

1/2"[13mm]5-3/4"

[146mm]10-1/2"[267mm]

The ALL-PRO EI500AT has a 5" aperture designed for PAR20and PAR30 halogen lamps. EI500AT is designed for use ininsulated ceilings and may be completely covered in insulation.AIR-TITE™ design meets restricted air flow requirements.

Housing: Gasketed die-stamped 20 gauge aluminum.Housing adjusts for ceilings up to 1-3/8" thick. AIR-TITE gasketsupplied with housing to complete ASTM-E283 installation.

Plaster Frame: Galvanized steel construction.The housingcan be removed from plaster frame to provide access to thejunction box. Regressed locking screw secures hanger bars.Cutouts provided for easily crimping hanger bars in position.


Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.Regressed set screw locks hanger bars in position. Score linesallow shortening for 12" joists. Integral nail simplifiesinstallation. Bar hangers can be repositioned 90° without tools.IntegralT-bar clip snaps ontoT-bar spline for quick alignment.



Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material

Meets following restricted air-flow and IC requirements:• State of CaliforniaTitle 24 Low Efficacy LuminaireIC and AT requirement

•Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy Conservation ConstructionCode (NY-ECCC)


COOPER LIGHTING

ALL-PRO

23

EI500RAT

5" Ape rtu re


Remode l Hous ing

The ALL-PRO EI500RAT housing has a 5" aperture designed forPAR20 and PAR30 halogen lamps. Designed for use in insulatedceilings and may be completely covered in insulation.This is anAIR-TITE housing and meets restricted airflow requirements.The EI500RAT can be installed from below the ceiling.

Housing: Die stamped 20 gauge aluminum. Integral flangesecures fixture against ceiling. Pre-installed AIR-TITE gasketcompletes ASTM-E283 installation.


Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four cable pryouts simplify NM (non-metallic) cableinstallation. Quick-connect wiring connectors included.


Thermal Protector : Integral thermal protector deactivatesfixture if an incorrect lamp is used or if insulation material isapplied incorrectly.

Labels . • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material

Meets following restricted air-flow and IC requirements:• State of CaliforniaTitle 24 Low Efficacy Luminaire ICand AT requirement

•Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy Conservation ConstructionCode (NY-ECCC)


7"[178mm]

1/2"[13mm]

6"[152mm]

14"[356mm]

5-1/2"[140mm]

ALL-PRO

COOPER LIGHTING

ET500ET500R

75W R30, 75W PAR30,75W PAR30L, 65W BR30

EI500AT 50W R30, 60W BR30,75W PAR30

EI500RAT 50W PAR30L, 50W PAR30,60W BR30

Trims For ET500, ET500R, EI500AT, EI500RAT

24

ERT520High Gloss ApplianceWhiteTrim with Clear Specular Re-flector Cone

ERT520WHTHigh Gloss ApplianceWhiteTrim withWhite Reflector Cone

ERT520GHigh Gloss ApplianceWhiteTrim with Gold Reflector Cone

ET500ET500R

60W A19

EI500ATEI500RAT

40W A19

Ref lector Cone• Torsion Springs pull trimtight to ceiling

6-1/2"[165mm]

3-1/4"[82mm]

Ref lector• Torsion Springs pull trim tightto ceiling


ERT521GHigh Gloss ApplianceWhiteTrim with Gold Reflector

5"[127mm]

6-1/2"[165mm]

COOPER LIGHTING

ALL-PROTrims For ET500, ET500R, EI500AT, EI500RAT

25

ET500ET500R

50W R20, 50W PAR20,75W R30, 75W PAR30

EI500AT 50W PAR20, 50W R20,65W BR30, 75W PAR30

EI500RAT30W R20, 35W PAR20,

50W PAR30, 50W PAR30L,60W BR30

ET500ET500R

75W R30, 75W PAR30

ET500ET500R

65W BR30, 75W R30,75W PAR30

EI500AT 60W BR30, 50W PAR30

EI500RAT 60W BR30, 50W PAR30,50W PAR30L

ERT501High Gloss ApplianceWhiteTrim with Black Baffle

ERT501WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle

Metal Baff le Splay• Torsion Springs pull trimtight to ceiling

6-1/2"[165mm]

Metal Baff le• Torsion Springs pull trimtight to ceiling

ERT510High Gloss ApplianceWhiteTrimwith Black Baffle

ERT510WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle6-1/2"

[165mm]

2-1/16" [52mm]

5"[127mm]



Deep Coi lex™ Baff le• Torsion Springs pull trimtight to ceiling

6-1/2"[165mm]

ALL-PRO

COOPER LIGHTING

ET500ET500R

75W A19, 65W BR30,75W R30, 75W PAR30L

EI500ATEI500RAT

65W BR30, 75W PAR30L

ET500ET500R

60W A19, 65W BR30,75W R30, 75W PAR30L

EI500ATEI500RAT



26

Baff le• Friction Clip retention• Lamps-ERT513WHT:

• Lamps-ERT513:

ET500ET500R

75W A19, 65W BR30,75W R30, 75W PAR30L

EI500ATEI500RAT


ET500ET500R

60W A19, 65W BR30, 75WR30, 75W PAR30L

EI500ATEI500RAT


ERT513High Gloss ApplianceWhite Trimwith Black Baffle

ERT513WHTHigh Gloss ApplianceWhiteTrim withWhite Baffle

H

OD6-3/4"[171mm]

5"[127mm]

6-3/4"[171mm]

5"[127mm]

ERT513TSHigh Gloss ApplianceWhiteTrim with Black Baffle and withtorsion spring construction

ERT513WHTTSHigh Gloss ApplianceWhite TrimwithWhite Baffle and with torsionspring construction

Baff le• Friction Clip retention• Lamps-ERT513WHTTS:

• Lamps-ERT513TS:

H

OD

5"[127mm]

6-3/4"[171mm]

COOPER LIGHTING


27

Gimbal - 25° T i l t• Torsion Springs pull trimtight to ceiling

ERT560High Gloss ApplianceWhiteTrimwithWhite Gimbal

ET500ET500R

75W PAR30

EI500ATEI500RAT

75W PAR30

6-1/2"[165mm]

ERT570High Gloss ApplianceWhiteTrimwithWhite Eyeball

ERT570PBPolished BrassTrim with PolishedBrass Eyeball

Eyebal l 30° T i l t• Torsion Springs pull trimtight to ceiling

ET500ET500REI500ATEI500RAT

75W PAR30

ET500ET500REI500ATEI500RAT

50W R20, 50W PAR20

6-1/2"[165mm]


Eyebal l - 30° T i l t• Torsion Springs pull trimtight to ceiling

6-1/2"[165mm]

ALL-PRO

COOPER LIGHTING

ET500ET500R

75W A19, 75W PAR30

EI500ATEI500RAT

40W A19, 50W PAR30

ET500ET500R

60W A19, 50W PAR30,50W PAR30L, 65W BR30

EI500ATEI500RAT

35W PAR30L

ET500ET500R

65W BR30, 75W R30,75W PAR30

EI500AT 65W BR30, 75W PAR30,75W R30

EI500RAT 50W PAR30, 75W PAR30L,60W BR30


28

ERT500High Gloss ApplianceWhiteSplayTrim

Splay Trim• Torsion Springs pull trim tightto ceiling

6-1/2"[165mm]

1-7/8"[48mm]

ERT550High Gloss ApplianceWhiteTrim with Frosted Drop Diffuser- AIR-TITETrim*

Frosted Drop GlassShower L ight• Torsion Springs pull trim tightto ceiling

ERT551High Gloss ApplianceWhiteTrim with Frosted Lens

Frosted Glass LensShower L ight• Torsion Springs pull trim tightto ceiling

6-1/2"[165mm]

6-1/2"[165mm]

5-1/2"[140mm]

COOPER LIGHTING


29

Fresnel Glass LensShower L ight• Wet location listed for use inshowers

ERT552High Gloss ApplianceWhiteTrimwith Fresnel lens

ET500ET500R

60W A19, 50W PAR30,50W PAR30L, 65W BR30

EI500ATEI500RAT

35W PAR30L

6-1/2"[165mm]

6-1/2"[165mm]

6-1/2"[165mm]

3"[76mm]

ERT530High Gloss ApplianceWhiteTrim withWhite Scoop andBlack Baffle

ERT530WHTHigh Gloss ApplianceWhiteTrim withWhite Scoop andWhite Baffle

Wal l Wash• Torsion Springs pull trimtight to ceiling

ET500ET500R

50W TB19, 60W A19,60W BT15, 60W MB19

ALL-PRO

COOPER LIGHTING30

EI700

6" Ape rtu re

IC Hous ing fo rI n su l a tedCe i l i ngs

6-1/2"[165mm]

7"[178mm]

1/2"[13mm]

7-1/2"[191mm]

10-1/2"[267mm]

The ALL-PRO EI700 housing is designed for use in insulatedceilings where the housing will be in direct contact withinsulation material.

Housing: Aluminum construction for greater heatdissipation.

Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.

Plaster Frame: Housing adjusts in plaster frame to accom-modate up to 1-3/4" thick ceilings. Plaster frame includes lockingscrew for securing hanger bars and cutouts for crimping hangerbars in position.

Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Seven con-duit knockouts are uniform 1/2" size with true pryout slots. Fourpryouts with integral strain relief simplify non-metallicsheathed cable installation.Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.A set screw locks housing in position. Score lines allow fieldshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-barclip snaps ontoT-bar spline for quick alignment.

Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray


Labels • UL/cUL listed for direct contact with Insulationand Combustible Material• UL/cUL Listed for FeedThrough• UL/cUL Listed for Damp Location• IP Rated

COOPER LIGHTING

ALL-PRO

31

EI700R

6" Ape rtu re


Remode lHous ing

6-7/8"[175mm]

7"[178mm]

1/2"[13mm]

13-1/4"[337mm]

6-1/4"[159mm]

The ALL-PRO EI700R remodel housing is designed forinstallations where the housing will be in direct contact withinsulation.The housing can be installed from below the ceiling.

Housing: Aluminum housing for greater heat dissipation.


Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four “NM” (non-metallic) cable pryouts with integralstrain relief included. Quick-connect wiring connectors included.


Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray.


Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact withInsulation and Combustible Material

ALL-PRO

COOPER LIGHTING32

EI700AT

6" Ape rtu re


6-1/2"[165mm]

7"[178mm]

1/2"[13mm]

7-1/2"[191mm]

10-1/2"[267mm]

The EI700 housing is designed for use in insulated ceilingswhere the housing will be in direct contact with insulation.This housing also meets restricted airflow requirements.

Housing: Aluminum construction for greater heat dissipa-tion. Air-Tite gasket supplied with housing to complete ASTM-E283 installation.


Plaster Frame: Housing adjusts in plaster frame for up to 1"thick ceilings. Plaster frame has locking screw for hanger barsand cutouts for crimping hanger bars in position.

Junct ion Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Seven conduitknockouts are uniform 1/2" size with true pryout slots. Four pry-outs with integral strain relief for non-metallic sheathed cableinstallation. Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks bar hangers in position. Score lines allow shorten-ing for 12" joists. Integral nail simplifies installation. Bar hang-ers can be repositioned 90° without tools. IntegralT-bar clipsnaps ontoT-bar spline for quick alignment.

Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protect socket from overspray.


Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andCombustible Material

Meets following restricted air-flow and IC requirements:• Washington State Energy Code• State of CaliforniaTitle 24 Low Efficacy LuminaireIC and AT

• International Energy Conservation Code (IECC)• NewYork State Energy Conservation ConstructionCode (NY-ECCC)


COOPER LIGHTING

ALL-PRO

33

EI700RAT

6" Ape rtu re


Remode lHous ing

The EI700RAT Remodel Housing is designed for installationswhere the housing will be in direct contact with insulation.Thishousing also meets restricted airflow requirements. It can beinstalled from below the ceiling.

Housing: Aluminum housing for greater heat dissipation.Air-Tite gasket pre-installed with housing for a completeASTM-E283 installation.


Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four NM (non-metallic) cable pryouts with integral strainrelief included. Quick-connect wiring connectors included.




Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulationand combustible material

Meets following restricted air-flow and IC requirements:• State of CaliforniaTitle 24 Low EfficacyLuminaire IC and AT Requirement



6 7/8"[175mm]

7"[178mm]

1/2"[13mm]

13-1/4"[337mm]

6-1/4"[159mm]

ALL-PRO

COOPER LIGHTING34

EI700ATNB

6" Ape rtu re


No Socke tB racke t

6-1/2"[165mm]

7-1/2"[191mm]

7"[178mm]

1/2"[13mm]

10-1/2"[267mm]

The ALL-PRO EI700ATNBAIR-TITE housing is designed forinstallations where it will be in direct contact with insulationand it meets restricted air flow requirements. It is designedwithout a socket plate for use with socket supporting trimsonly. There is no need to spend time adjusting or disconnect-ing the socket and removing the socket plate.

Housing: Aluminum construction for greater heat dissipa-tion. Air-Tite gasket supplied with housing to completeASTM-E283 installation.

Plaster Frame: Housing adjusts in plaster frame 1" toaccommodate different ceiling thicknesses.

Junct ion Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Seven conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain relief.Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks hanger bars in position. Score lines allow fieldshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-barclip snaps ontoT-bar spline for quick alignment.



Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulationand combustible material

Meets following restricted air-flow and IC requirements:• State of CaliforniaTitle 24 Low efficacy LuminaireIC and AT requirement



COOPER LIGHTING

ALL-PRO

35

EI700NB

6" Ape rtu re


No Socke tB racke t

6-1/2"[165mm]

7-1/2"[191mm]

7"[178mm]

1/2"[13mm]

10-1/2"[267mm]

The ALL-PRO EI700ATNB housing is designed for installationswhere it will be in direct contact with insulation. It is designedwithout a socket plate for use with socket supporting trimsonly. There is no need to spend time adjusting ordisconnecting the socket and removing the socket plate.

Housing: Aluminum construction for greater heat dissipa-tion.

Plaster Frame: Housing adjusts in plaster frame 1-3/4" toaccommodate different ceiling thicknesses.

Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Sevenconduit knockouts are uniform 1/2" size with true pryout slots.Four “NM” (non-metallic) cable pryouts with integral strain re-lief. Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks housing in position. Score lines allow field shorten-ing for 12" joists. Integral nail simplifies installation. Bar hang-ers can be repositioned 90° without tools. IntegralT-bar clipsnaps ontoT-bar spline for quick alignment.



Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material

ALL-PRO

COOPER LIGHTING

Specular Ref lector• Coil Spring retention

EI700EI700AT

75W R30, 65W BR30,50W PAR30, 75W PAR30L

EI700REI700RAT

50W PAR30, 75W PAR30L,65W BR30, 75W R30

EI700EI700ATEI700R

EI700RATEI700NB

EI700ATNB

40W A19, 65W BR30,75W PAR30,75W PAR30L,

75W R30, 90W BR40

Trims For EI700, EI700R, EI700AT, EI700RAT,EI700ATNB, EI700NB

ERT710GHigh Gloss ApplianceWhiteTrimwith Gold Reflector


White Ref lector• Socket supporting trim• ERT712 -Friction clip retention• ERT712TS -Torsion spring retention

ERT712TSHigh Gloss ApplianceWhiteTrimwithWhite Reflector andTorsionSpring Construction

ERT712High Gloss ApplianceWhiteTrimwithWhite reflector

36

2-7/8"[73mm]

7-1/4"[184mm]

ERT712

ERT712TS

7-1/4"[184mm]

7-1/4"[184mm]

5-3/8"[136mm]

5-3/8"[136mm]

COOPER LIGHTING

ALL-PROTrims For EI700, EI700R, EI700AT, EI700RAT,

EI700ATNB, EI700NB

37

EI700EI700ATEI700R

EI700RAT

50W PAR30, 65W BR30,75W R30, 75W PAR30L

EI700EI700ATEI700R

EI700RAT

40W A19, 65W BR30,75W PAR30, 75W PAR30L,

90W BR40


Metal Baff le• Coil spring retention• Two trim rings (narrow andwide), supplied with trim


8"[203mm]

2-7/8"[73mm]


ERT713TSHigh Gloss ApplianceWhiteTrimwith Black Baffle andTorsionSpring Construction

Black Meta l Baff le• Socket supporting trim• ERT713 -Friction clip retention• ERT713TS -Torsion spring retention

ERT713TS

ERT713

7-1/4"[184mm]

7-1/4"[184mm]

5"[127mm]

5"[127mm]

ALL-PRO

COOPER LIGHTING38


ERT713WHTTSHigh Gloss ApplianceWhiteTrimwithWhite Baffle andTorsionSpring Construction

Metal Baff le• Socket supporting trim• ERT713WHT - Friction clipretention• ERT713WHTTS -Torsionspring retention

EI700EI700ATEI700R

EI700RATEI700NB

EI700ATNB

40W A19, 65W BR30,75W PAR30,75W PAR30L,

75W R30, 90W BR40

EI700EI700ATEI700R

EI700RATEI700NB

EI700ATNB

75W BR40,65W BR30, 75W PAR30L

ERT713WHTTS

ERT713WHT

7-1/4"[184mm]

7-1/4"[184mm]

5-3/8"[136mm]

5-3/8"[136mm]

ERT713LTS

ERT713L

7-1/4"[184mm]

7-1/4"[184mm]

5-3/8"[136mm]

5-3/8"[136mm]

ERT713LHigh Gloss ApplianceWhiteTrimwith Black Baffle

ERT713LTSHigh Gloss ApplianceWhiteTrim with Black Baffle andTor-sion Spring Construction

Black Meta l Baff le• Provides deeper lamp re-gression for BR lamps• ERT713LTS -Torsion spring retention• ET713L -Friction clip retention


COOPER LIGHTING

ALL-PRO

39



Plast ic Baff le• Coil spring retention

EI700EI700ATEI700R

EI700RAT

50W PAR30,65W BR30,75W PAR30L

8"[203mm]

2-1/4"[136mm]


ERT704PBPolished BrassTrim withPolished Brass Eyeball

Eyebal l• Torsion springs pull trimtight to ceiling

EI700EI700ATEI700R

EI700RATEI700NB

EI700ATNB

75W BR40,65W BR30,75W PAR30L

Aperture:3-15/16"[100mm]

OD:8" [203mm]

ERT711High Gloss ApplianceWhiteTrimand Eyeball with Black Baffle

Regressed Eyebal l

EI700EI700AT

50W PAR30

EI700NBEI700ATNB

65W BR30,75W R30

8"[203mm]

3" [76mm]


ALL-PRO

COOPER LIGHTING40


OD:8" [203mm]

Open• Coil Spring retention

EI700EI700ATEI700R

EI700RATEI700NB

EI700ATNB

65W BR30,75W PAR30.75W PAR30L

EI700EI700ATEI700R

EI700RATEI700NB

EI700ATNB

50W PAR30L, 65W BR30

EI700EI700ATEI700R

EI700RATEI700NB

EI700ATNB

40W A19

ERT721High Gloss ApplianceWhiteTrimwith Frosted Lens

Shower L ight withFrosted Glass Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers

8"[203mm]

4-1/4"[108mm]



Black Meta l Baff le/Splay• Combination baffle/splaytrim• Socket Supporting trim• ERT725 -Friction clip retention•ERT725TS -Torsion spring retention

Height:5-3/8" [136mm]OD:7-1/4" [184mm]

ERT725TSERT725

ERT705High Gloss ApplianceWhiteTrim


COOPER LIGHTING

ALL-PRO

41

EI700EI700ATEI700R

EI700RATEI700NB

EI700ATNB

40W A19, 50W PAR30L,65W BR30,75W PAR30L

EI700EI700ATEI700R

EI700RATEI700NB

EI700ATNB

40W A19,65W BR30,75W PAR30L75W PAR30L

EI700EI700ATEI700R

EI700RATEI700NB

EI700ATNB

40W A19


ERT725WHTTSHigh Gloss ApplianceWhiteTrimwithWhite Baffle andTorsion Spring Construction

White Meta l Baff le/Splay• Combination baffle/splay trim• Socket Supporting trim• ET725WHT -Friction clip retention• ERT725WHTTS -Torsion spring retention

ERT725WHTTS

ERT725WHT

7-1/4"[184mm]

5-3/8"[136mm]

7-1/4"[184mm]

5-3/8"[136mm]

ERT716High Gloss ApplianceWhiteTrimwithWhite Baffle

Shal low Meta l Baff le• Socket Supporting trim• Friction clip retention

8"[203mm]

4-1/4"[108mm]

ERT723High Gloss ApplianceWhiteTrimwith Glass Fresnel Lens

Shower L ight with GlassFresnel Lens andRef lector• Torsion springs pull trim tightto ceiling• Wet location listed for use inshowers• Socket supporting trim

8"[203mm]

4-1/4"[108mm]


ALL-PRO

COOPER LIGHTING42

ET700

6" Ape rtu re



6-1/2"[165mm]

7"[178mm]

1/2"[13mm]

7-1/2"[191mm]

10-1/2"[267mm]

The ALL-PRO ET700 is designed for use in non-insulated ceilingsin residential and commercial applications. If ceiling insulationis present, it must be kept 3" from all sides of the fixture.

Housing: Die-stamped 20 gauge CRS with white powder coatfinish.


Plaster Frame: Housing adjusts in plaster frame toaccommodate ceilings up to 1-3/4" thick. Includes locking screwand cutouts for crimping hanger bars in position.

Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Seven con-duit knockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks bar hangers in position. Score lines allow fieldshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-barspline snaps ontoT-bar for quick alignment.

Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray

Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping or misapplied insulation.

Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• IP Rated

COOPER LIGHTING

ALL-PRO

43

ET700R

6" Ape rtu re

Non - IC Hous -i ng fo r Use InUn insu l a tedCe i l i ngs

Any Insu l a t i onP resen t Mus tBe Kep t 3 "From Hous ing

7"[178mm]

1/2"[13mm]

6 7/8"[175mm]

13 1/4"[337mm]

6-1/4"[159mm]

The ALL-PRO ET700R remodel housing is designed for use innon-insulated existing ceilings. If ceiling insulation is present, itmust be kept 3" from the fixtures on all sides.The ET700R canbe installed from below the ceiling.



Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four “NM” (non-metallic) cable pryouts with integralstrain relief included. Quick-connect wiring connectors included.

Remodel C l ips ; Four remodel clips secure housing andaccommodate 1/2" and 5/8" ceiling thickness.


Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improper lamp-ing or misapplied insulation.

Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• IP Rated

ALL-PRO

COOPER LIGHTING

Trims For ET700, ET700R

44


ET70065W BR30, 75W R30,

75W PAR30, 150W R40,150W PAR38

ET700R65W BR30, 75W R30,

75W PAR30,75W PAR30L, 150W R40

ET70085W BR30, 120W BR40,100W R30, 75W PAR30L,

100W A19

ET700R 65W BR30, 75W PAR30L




ERT712TSHigh Gloss ApplianceWhiteTrimwithWhite reflector andTorsionSpring Construction


2-7/8"[73mm]

7-1/4"[184mm]

ERT712

ERT712TS

7-1/4"[184mm]

7-1/4"[184mm]

5-3/8"[136mm]

5-3/8"[136mm]

COOPER LIGHTING

ALL-PROTrims For ET700, ET700R

45

ET700 65W BR30, 75W R30,75W PAR30

ET700R

65W BR30, 75W R30,75W PAR30,75W PAR30L,

120W BR40, 150W R40




8"[203mm]

2-7/8"[73mm]

ET700 120W R40, 120W PAR38ERT709High Gloss ApplianceWhiteTrimwith Black Baffle

Large Aperture Meta lBaff le• Coil spring retention• Two trim rings (narrow andwide), supplied with trim


8"[203mm]

2-5/8"[67mm]

ALL-PRO

COOPER LIGHTING


46




ERT713TS

ERT713

7-1/4"[184mm]

7-1/4"[184mm]

5"[127mm]

5"[127mm]

ET70075W PAR30L, 85W BR30,100W R30, 100W A19,

120W BR40


ET70075W PAR30L, 85W BR30,100W R30, 100W A19,

120W BR40





ERT713WHTTS

ERT713WHT

7-1/4"[184mm]

7-1/4"[184mm]

5-3/8"[136mm]

5-3/8"[136mm]

COOPER LIGHTING


47

ET700

75W A19, 75W PAR30L,75W PAR30, 85W BR30,100W R30, 120W BR40,

150W R40

ET700R 65W BR30, 75W PAR30L,150W R40

ET700 75W R30, 75W PAR30,75W PAR30L, 85W BR30

ET700R 75W R30, 75W PAR30L,85W BR30

ERT713LTS

ERT713L

7-1/4"[184mm]

7-1/4"[184mm]

5-3/8"[136mm]

5-3/8"[136mm]


ERT713LTSHigh Gloss ApplianceWhiteTrimwith Black Baffle andTorsionSpring Construction

Black Meta l Baff le• Provides deeper lamp re-gression for BR lamps• ET713L -Friction clip retention• ERT713LTS -Torsion spring retention




8"[203mm]

2-1/4"[136mm]

ALL-PRO

COOPER LIGHTING


48



Large Aperture Plast icBaff le• Coil spring retention

ET700 150W PAR30, 150W R40

ET700R 150W R40

8"[203mm]

2-3/4"[70mm]

ET700ET700R

40W A19, 65W BR30,75W PAR30L, 75W PAR30L

ET700ET700R

75W R30, 75W PAR30,75W PAR30L

ERT716High Gloss ApplianceWhiteTrim withWhite Baffle


8"[203mm]

4-1/4"[108mm]

ERT704High Gloss ApplianceWhiteTrim withWhite Eyeball




OD:8" [203mm]

COOPER LIGHTING

ALL-PRO

49


ET70065W BR30, 75W R30,

75W PAR30

ET700R 65W R30, 75W R30,75W PAR30, 75W PAR30L

ET700 65W BR30, 75W R30,75W PAR30

ET700ET700R

40W A19, 65W BR30,75W PAR30L, 75W PAR30L

ERT711High Gloss ApplianceWhiteTrimand Eyeball with Black Baffle

Regressed Eyebal l

8"[203mm]

3" [76mm]


Open• Coil spring retention


OD:8" [203mm]


Large Aperture Open• Coil Spring Retention

ET700ET700R

120W BR40, 150W R40


OD:8" [203mm]

ERT701High Gloss ApplianceWhiteTrimwith Albalite Lens

Albal i te Lens ShowerL ight• Wet Location listed for use inshowers• Torsion spring retention

8"[203mm]

ALL-PRO

COOPER LIGHTING

ET700ET700R

60W A19


50

Drop Opal P last ic LensShower L ight• Wet Location listed for use inshowers• Torsion spring retention

ERT702High Gloss ApplianceWhiteTrimwith Drop Opal Lens

8"[203mm]


Fresnel Lens ShowerL ight• Wet Location listed for usein showers

ET700ET700R

60W A19

ET700ET700R

65W BR30, 75W R30,75W PAR30, 75W PAR30L

8"[203mm]

ERT705WhiteTrim

Open• Coil Spring retention• Fixed socket position


OD:8" [203mm]

COOPER LIGHTING

ALL-PRO


51

ET700ET700R

60W A19



4-1/4"[108mm]

4-1/4"[108mm]

8"[203mm]

8"[203mm]


Shower L ight withGlass Fresnel Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers• Socket supporting trim

ET700ET700R

60W A19

ALL-PRO

COOPER LIGHTING


52

ET700ET700R

50W PAR30L, 85W BR30,90W A19, 100W R30

ERT725TSHigh Gloss ApplianceWhiteTrim with Black Baffle andTorsion Spring Construction


Black Meta l Baff le/Splay• Combination baffle/splaytrim• Socket Supporting trim• ERT725 - Friction clipretention• ERT725TS -Torsion springretention

ERT725

ERT725TS

5-3/8"[136mm]

5-3/8"[136mm]

7-1/4"[184mm]

7-1/4"[184mm]

COOPER LIGHTING


53

ET700ET700R

50W PAR30L, 85W BR30,90W A19, 100W R30

ERT725WHTTS

ERT725WHT

5-3/8"[136mm]

5-3/8"[136mm]

7-1/4"[184mm]

7-1/4"[184mm]



White Meta lBaff le/Splay• Combination baffle/splaytrim• Socket Supporting trim• ET725WHT - Friction clipretention• ERT725WHTTS -Torsionspring retention

ALL-PRO

COOPER LIGHTING54

EI700U

6" Ape rtu re


9-1/2"[241mm]

13"[330mm]6-1/2"

[165mm]

7-1/2"[199mm]

1/2"[13mm]

6-3/4"[171mm]

The ALL-PRO EI700U housing is designed to be used in directcontact with insulation.The All-Pro EI700U housing is suited foruse in insulated ceilings in residential and commercial applica-tions.The IC construction allows an unbroken insulation barrierto be maintained.

Housing: Double wall aluminum construction for greater heatdissipation. Double wall housing allows higher wattages onselect trims than single wall IC housing.

Socket P late : Fixed socket plate maintains consistent lampposition.


Junct ion Box: Listed for through branch circuit wiring. Ac-commodates straight conduit runs. Seven conduit knockoutsare uniform 1/2" size with true pryout slots. Four “NM” (non-metallic) cable pryouts with integral strain relief also included.Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks housing in position. Score lines allow shortening for12" joists. Integral nail simplifies installation. Bar hangers canbe repositioned 90° without tools. IntegralT-bar spline snapsontoT-bar for quick alignment.




COOPER LIGHTING

ALL-PRO

55

EI700UAT

6" Ape rtu re


9-1/2"[241mm]

13"[330mm]6-1/2"

[165mm]

7-1/2"[199mm]

1/2"[13mm]

6-3/4"[171mm]

The ALL-PRO EI700UAT housing is designed for use in directcontact with insulation. The IC construction allows an unbrokeninsulation barrier to be maintained and the AIR-TITE constructionmeets restricted airflow requirements.

Housing: Double wall aluminum construction for greater heatdissipation. Double wall housing allows higher wattages on se-lect trims than single wall housing. Air-Tite gasket pre-installedfor ASTM-E283 compliance.

Socket P late : Fixed socket plate maintains consistent lampposition.


Junct ion Box: Listed for through branch circuit wiring. Ac-commodates straight conduit runs. Seven conduit knockouts are1/2" with true pryout slots. Four “NM” (non-metallic) cable pry-outs with integral strain relief. Quick-connect wiring connectors.

Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks housing in position. Score lines allow shortening for12" joists. Integral nail simplifies installation. Bar hangers canbe repositioned 90° without tools. IntegralT-bar spline snapsontoT-bar for quick alignment.




Meets following restricted air-flow and IC requirements:• State of CaliforniaTitle 24 Low Efficacy Luminaire

IC and AT requirement• Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy Conservation ConstructionCode (NY-ECCC)


ALL-PRO

COOPER LIGHTING

Trims For EI700U, EI700UAT

56


EI700UEI700UAT

75W PAR30, 75W PAR30L,85W BR30, 90W BR40,100W R30, 100W R40,

100W PAR38

EI700UEI700UAT

60WA19, 75W PAR30,75W PAR30L, 85WBR30, 100W R30,120W BR40




ERT712TSHigh Gloss ApplianceWhiteTrimwithWhite reflector andTorsionSpring Construction


2-7/8"[73mm]

7-1/4"[184mm]

ERT712

ERT712TS

7-1/4"[184mm]

7-1/4"[184mm]

5-3/8"[136mm]

5-3/8"[136mm]

COOPER LIGHTING

ALL-PROTrims For EI700U, EI700UAT

57

EI700UEI700UAT

65W BR30, 75W R30,75W PAR30, 75W PAR30L,90W PAR38, 90W BR40,

100W R40

EI700UEI700UAT

90W BR40




8"[203mm]

2-7/8"[73mm]


Large Aperture Meta lBaff le• Coil spring retention• Two trim rings (narrow andwide), supplied with trim


8"[203mm]

2-5/8"[67mm]

ALL-PRO

COOPER LIGHTING58




ERT713TS

ERT713

7-1/4"[184mm]

7-1/4"[184mm]

5"[127mm]

5"[127mm]




ERT713WHTTS

ERT713WHT

7-1/4"[184mm]

7-1/4"[184mm]

5-3/8"[136mm]

5-3/8"[136mm]


EI700UEI700UAT

60W A19, 75W PAR30,75W PAR30L, 85W BR30,

120W BR40

EI700UEI700UAT

60W A19, 75W PAR30,75W PAR30L, 85W BR30,100W R30, 120W BR40

COOPER LIGHTING

ALL-PRO

59

ERT713LTS

ERT713L

7-1/4"[184mm]

7-1/4"[184mm]

5-3/8"[136mm]

5-3/8"[136mm]


ERT713LTSHigh Gloss ApplianceWhiteTrimwith Black Baffle andTorsionSpring Construction

Black Meta l Baff le• Provides deeper lamp re-gression for BR lamps• ET713L -Friction clip retention• ERT713LTS -Torsion spring retention




8"[203mm]

2-1/4"[136mm]


EI700UEI700UAT

40W A19, 75W PAR30,75W PAR30L, 85W BR30,

120W BR40

EI700UEI700UAT

65W BR30, 75W PAR30,75W PAR30L

ALL-PRO

COOPER LIGHTING60





OD:8" [203mm]


Large Aperture Open• Coil Spring Retention


OD:8" [203mm]


Albal i te Lens ShowerL ight• Wet Location listed for usein showers• Torsion spring retention


EI700UEI700UAT

75W PAR30,75W PAR30L,

85W BR30, 100W R30

EI700UEI700UAT

100W R40 (RequiresH1999 Socket Extender)

EI700UEI700UAT

40W A19

8"[203mm]

COOPER LIGHTING

ALL-PRO

61


Drop Opal P last ic LensShower L ight• Wet Location listed for use inshowers• Torsion spring retention


8"[203mm]


Fresnel Lens ShowerL ight• Wet Location listed for usein showers

8"[203mm]

ERT705WhiteTrim


8"[203mm]

EI700UEI700UAT

75W PAR30, 75WPAR30L, 85W BR30,

100W R30

EI700UEI700UAT

40W A19

EI700UEI700UAT

40W A19

ALL-PRO

COOPER LIGHTING62

EI700UEI700UAT

60W A19



4-1/4"[108mm]

4-1/4"[108mm]

8"[203mm]

8"[203mm]



EI700UEI700UAT

60W A19


COOPER LIGHTING

ALL-PRO

63


EI700UEI700UAT

40W A19, 75W PAR30L,85W BR30, 100W R30



Black Meta l Baff le/Splay• Combination baffle/splaytrim• Socket Supporting trim• ERT725 - Friction clipretention• ERT725TS -Torsion springretention

ERT725

ERT725TS

5-3/8"[136mm]

5-3/8"[136mm]

7-1/4"[184mm]

7-1/4"[184mm]

EI700UEI700UAT

60W A19, 75W PAR30L,85W BR30, 100W R30

ERT725WHTTS

ERT725WHT

5-3/8"[136mm]

5-3/8"[136mm]

7-1/4"[184mm]

7-1/4"[184mm]



White Meta lBaff le/Splay• Combination baffle/splaytrim• Socket Supporting trim• ET725WHT - Friction clipretention• ERT725WHTTS -Torsionspring retention

ALL-PRO

COOPER LIGHTING64

EI2700

6" Ape rtu re


Fo r Sha l l owCe i l i ngs

7-1/2"[191mm]

5"[127mm]

6-1/2" [140mm]1/2"[12mm]

10-1/2"[267mm]

The ALL-PRO EI2700 housing is designed for use in shallowceilings where 2"x6" joist construction is used. It is also de-signed for shallow ceilings where insulation is present andwhere the housing will be in direct contact with insulation.



Plaster Frame: Housing adjusts in plaster frame 1-3/8" toaccommodate different ceiling thicknesses.

Junct ion Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Seven conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.A set screw locks bar hangers in position. Score lines allowshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-barclip snaps ontoT-bar spline for quick alignment.

Socket ; Porcelain socket with nickel plated brass screwshell. Shipping insert protects socket against overspray.

Thermal Protector : IntegralThermal Protector deactivatesfixture if an incorrect lamp is used.


COOPER LIGHTING

ALL-PRO

65

EI2700R

6" Ape rtu re



6-7/8"[175mm]

13-1/4"[337mm]

5"[127mm]

1/2"[13mm]

6-1/4"[159mm]

The ALL-PRO EI2700R housing is designed for remodeling usein shallow ceilings where 2" x 6" joist construction is used. It isalso designed for use where insulation is present and where thehousing will be in direct contact with insulation.The EI2700Rcan be installed from below the ceiling.



Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four “NM” (non-metallic) cable pryouts with integralstrain relief are included. Quick-connect wiring connectors in-cluded.


Thermal Protector : IntegralThermal Protector deactivatesfixture if an incorrect lamp is used.

Remodel C l ips : Four remodel clips secure housing and ac-commodate 1/2" and 5/8" ceiling thickness.

Labels : • UL/cUL listed for direct contact with insulation andcombustible material

• UL/cUL Listed for FeedThrough• UL/cUL Listed for Damp Location

ALL-PRO

COOPER LIGHTING66

EI2700AT

6" Ape rtu re



7-1/2"[191mm]

5"[127mm]

6-1/2"[140mm]

1/2"[12mm]

10-1/2"[267mm]

The ALL-PRO EI2700AT housing is designed for use in shallowceilings where 2" x 6" joist construction is used. It is alsodesigned for use where insulation is present and where thehousing will be in direct contact with insulation. The EI2700AThousing has AIR-TITE construction and meets restricted airflowrequirements.

Housing: Aluminum housing for greater heat dissipation. Air-Tite gasket supplied with housing to complete ATM-E283 in-stallation.



Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Seven con-duit knockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks bar hangers in position. Score lines allow fieldshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-Barhangers fit ontoT-Bar spline for quick alignment.


Thermal Protector : IntegralThermal Protectordeactivates fixture if an incorrect lamp is used.

COOPER LIGHTING

ALL-PRO

67

Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact withInsulation and combustible material

Meets following restricted air-flow and IC requirements:

• Washington State Energy Code• State of CaliforniaTitle 24 Low EfficacyLuminaire IC and AT requirement

• International Energy ConservationCode (IECC)

• NewYork State Energy ConservationConstruction Code (NY-ECCC)


ALL-PRO

COOPER LIGHTING

Trims For EI2700, EI2700R, EI2700AT

68


EI2700EI2700ATEI2700R

50W PAR30, 65W BR30,75W R30, 75W PAR30L



2-7/8"[73mm]

7-1/4"[184mm]




8"[203mm]

2-7/8"[73mm]

EI2700EI2700AT

50W PAR30, 65W BR30,75W PAR30L

EI2700R 65W BR30, 75W PAR30L

COOPER LIGHTING

ALL-PROTrims For EI2700. EI2700R, EI2700AT

69




8"[203mm]

2-1/4"[136mm]

EI2700EI2700ATEI2700R


ERT716High Gloss ApplianceWhiteTrimwithWhite Baffle


8"[203mm]

4-1/4"[108mm]

EI2700EI2700AT


EI2700R 50W PAR30, 60W BR30

ALL-PRO

COOPER LIGHTING

Trims For EI2700. EI2700R, EI2700AT

70





OD:8" [203mm]

ERT705WhiteTrim


8"[203mm]

EI2700EI2700AT

65W BR30, 75W R30,75W PAR30L

EI2700R 65W BR30, 75W R30,75W PAR30L

EI2700EI2700AT

50W PAR30L, 60W BR30,75W PAR30

EI2700R 60W BR30

COOPER LIGHTING

ALL-PROTrims For EI2700. EI2700R, EI2700AT

71



4-1/4"[108mm]

4-1/4"[108mm]

8"[203mm]

8"[203mm]



EI2700EI2700AT

35W PAR30L

EI2700R 40W A19

EI2700EI2700AT

35W PAR30L

EI2700R 40W A19

ALL-PRO

COOPER LIGHTING72

ET2700

6" Ape rtu re

Non - IC Fo r Non -i n su l a ted Ce i l -i ngs


Insu l a t i on Mus tBe Kep t 3 " FromHous ing

7-1/2"[191mm]

5"[127mm]

1/2"[13mm]

6-1/2"[140mm]

10-1/2"[267mm]

The ALL-PRO ET2700 housing is designed for use in shallowceilings where 2" x 6" joist construction is used. The ET2700 isdesigned for non-insulated shallow ceilings. If ceilinginsulation is present, it must be kept 3" from the fixtures on allsides.



Plaster Frame: Housing adjusts in plaster frame 1-3/8" toaccommodate different ceiling thicknesses. Includeslocking screws for hanger bars and cutouts for crimpinghanger bars in position.

Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Seven con-duit knockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain relief.Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks bar hangers in position. Score lines allow shorten-ing for 12" joists. Integral nail simplifies installation. Bar hang-ers can be repositioned 90° without tools. IntegralT-bar clipsnaps ontoT-bar spline for quick alignment.


Thermal Protector : IntegralThermal Protector deactivatesfixture if an incorrect lamp is used or if ceiling insulation mate-rial is not applied correctly.

Labels : • UL/cUL Damp Location Listed• UL/cUL Listed for FeedThrough

COOPER LIGHTING

ALL-PRO

73

ET2700R

6" Ape rtu re

Non - IC Remode lHous ing fo r Non -i n su l a tedCe i l i ngs


Insu l a t i on Mus tBe Kep t 3 " FromHous ing

6-7/8"[175mm]

13-1/4"[337mm]

5"[127mm]

1/2"[13mm]

6-1/4"[159mm]

The ALL-PRO ET2700R housing is designed for remodeling usein shallow ceilings where 2" x 6" joist construction is used. TheET2700R is designed for use in ceiling where there is no insula-tion. If ceiling insulation is present, it must be kept 3" from thefixtures on all sides.



Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four “NM” (non-metallic) cable pryouts with integralstrain relief are included. Quick-connect wiring connectors in-cluded.

Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket from overspray.

Thermal Protector : IntegralThermal Protector deactivatesfixture if an incorrect lamp is used or if ceiling insulationmaterial is not applied correctly.

Remodel C l ips : Four remodel clips secure housing andaccommodate ceiling thicknesses from 1/2" to 5/8".

Labels : • UL/cUL listed for Damp Location• UL/cUL listed for FeedThrough

COOPER LIGHTING

ET270075W PAR30,

75W PAR30L, 85W BR30,100W R30

ET2700R65W BR30, 75W R30,

75W PAR30,75W PAR30L, 85W BR30

74





2-7/8"[73mm]

7-1/4"[184mm]




8"[203mm]

2-7/8"[73mm]

ET2700ET2700R

65W BR30, 75W R30,75W PAR30, 75W PAR30L

COOPER LIGHTING 75





8"[203mm]

2-1/4"[136mm]

ET2700ET2700R

40W A19, 65W BR30, 75WPAR30, 75W PAR30L

ERT716High Gloss ApplianceWhiteTrim withWhite Baffle


8"[203mm]

4-1/4"[108mm]

ET2700 75W R30, 75W PAR30,85W BR30

ET2700R 75W PAR30, 75W PAR30L,85W BR30





OD:8" [203mm]

ET2700ET2700R

65W BR30, 75W R30,75W PAR30, 75W PAR30L

ALL-PRO

COOPER LIGHTING

ET2700ET2700R

65W BR30, 75W R30,75W PAR30,75W PAR30L


76


Open• Coil spring retention


OD:8" [203mm]


Large Aperture Open• Coil spring retention

ET2700 120W BR40, 150W R40


OD:8" [203mm]


Albal i te Lens ShowerL ight• Wet Location listed for use inshowers

ET2700 60W A19

ET2700 60W A19

8"[203mm]


Drop Opal P last ic LensShower L ight• Wet Location listed for usein showers• Torsion spring retention

8"[203mm]

COOPER LIGHTING


77

ET2700 60W A19 ERT703High Gloss ApplianceWhiteTrimwith Glass Fresnel lens

Fresnel Lens ShowerL ight• Wet Location listed for use inshowers• Torsion spring retention

8"[203mm]



4-1/4"[108mm]

4-1/4"[108mm]

8"[203mm]

8"[203mm]



ET2700R 60W A19

ET2700R 60W A19

ALL-PRO

COOPER LIGHTING78

ET4700

6" Ape rtu re

Non - IC fo rNon - i n su l a tedCe i l i ngs

Insu l a t i on Mus tBe Kep t 3”f romHous ings

Fo r S lope Ce i l i ngs

6-1/2" to 8-3/4"[165 to 222mm]

1/2"[13mm]

6-3/4"[171mm]

14-3/4"[375mm]

10-1/2"[267mm]

5-1/4"[133mm]

TheALL-PRO ET4700 housing is designed for sloped ceiling instal-lations in ceilings ranging from 2/12 to 6/12 pitch.The socket aim-ing mechanism allows the lamp to be aimed straight downregardless of ceiling pitch. It is also designed for use in non-insu-lated ceilings. If insulation is present it must be kept 3" from allsides of the housing.

Housing Features: Thermal protector guards against misuse ofinsulation materials. Telescoping housing for ceiling constructiondown to 2"x 8".With deeper ceilings the telescoping feature pro-vides deeper lamp position. Exclusive socket aimingmechanismswivels and rotates to properly align lamp. Slope indicator pro-vides quick and consistent lamp settings (factory set for 3/12slope).

Junct ion Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Seven conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.

Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks bar hangers in position. Score lines allow fieldshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-barclip clips ontoT-bar spline for quick alignment.


Trim: One piece seamless baffle presents a clean finishedappearance.

Listings: • UL/cUL Damp Location Listed• UL/cUL Listed for FeedThrough

COOPER LIGHTING 79

ALL-PROTrims For ET4700

ET4700 90W PAR38


Baff le• One piece seamless baffle• Baffle ridges are parallel tofloor plane



OD:8" [203mm]

ALL-PRO

COOPER LIGHTING80

EI4700EI4700AT

6" Ape rtu re

IC Insu l a ted Ce i l i ng

E I 470 0AT i sIC A IR -T ITE

Fo r S lope Ce i l i ngs

6-3/4"[171mm]

7-1/8"[181mm]

1/2"[13mm] 10-1/2"

[267mm]

10"[254mm]

14-3/4"[375mm]

5-1/4"[133mm]

Designed for sloped ceiling installations for ceilings from 2/12 to6/12 pitch.The socket aiming mechanism allows the lamp to beaimed straight down regardless of ceiling pitch. EI4700AT issealed and gasketed to limit airflow between attic areas andheated or air conditioned living areas.

Housing Features: Integral thermal protector guards against im-proper lamping. Housing has AIR-Tite gasket pre-installed forASTM-E283 compliance. Double wall housing construction.Door in outer housing allows junction box access from belowceiling. Exclusive socket aiming mechanism swivels and rotatesto properly align lamp. Slope indicator provides quick and con-sistent lamp settings (factory set for 3/12 slope).

Junction Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Seven conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain relief.Quick-connect wiring connectors included.

Bar Hangers: Pre-installed, captive bar hangers allow housing tobe positioned at any point within a 24" joist span. A set screw isprovided to lock bar hangers in position along bar hangers.Score lines provided for easy shortening for 12” joists. Integralnail simplifies installation. Bar hangers can be repositioned 90°without tools. IntegralT-bar clip snaps ontoT-bar spline for quickalignment.

Trim: One piece seamless baffle presents a clean finishedappearance.

Listings: • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material

COOPER LIGHTING

ALL-PRO

81

EI4700AT also meets the following requirements:• Washington State Energy Code• State of CaliforniaTitle 24 Low EfficacyLuminaire IC and AT requirement

• International Energy Conservation Code (IECC)• NewYork State Energy ConservationConstruction Code (NY-ECCC)


Trims For ET4700

EI4700EI4700AT

90W PAR38ERT4980High Gloss ApplianceWhiteTrimwith Black Baffle

Baff le• One piece seamless baffle• Baffle ridges are parallel tofloor plane



OD:8" [203mm]

ALL-PRO

COOPER LIGHTING82

Numerical Index

EI400AT . . . . . . . . . . . . . . . . .10EI400LVAT . . . . . . . . . . . . . . .16EI500AT . . . . . . . . . . . . . . . . .22EI500RAT . . . . . . . . . . . . . . .23EI700 . . . . . . . . . . . . . . . . . . .30EI700R . . . . . . . . . . . . . . . . . .31EI700RAT . . . . . . . . . . . . . . .33EI700AT . . . . . . . . . . . . . . . . .32EI700ATNB . . . . . . . . . . . . . .34EI700NB . . . . . . . . . . . . . . . .35EI700U . . . . . . . . . . . . . . . . .54EI700UAT . . . . . . . . . . . . . . .55EI2700 . . . . . . . . . . . . . . . . . .64EI2700R . . . . . . . . . . . . . . . . .65EI2700AT . . . . . . . . . . . . . . . .66EI4700 . . . . . . . . . . . . . . . . . .80EI4700AT . . . . . . . . . . . . . . . .80ERT401WHT . . . . . . . . . . . . .12ERT401LV . . . . . . . . . . . . . . .18ERT401LVW . . . . . . . . . . . . . .18ERT402 . . . . . . . . . . . . . . . . .13ERT402LV . . . . . . . . . . . . . . .19ERT403 . . . . . . . . . . . . . . . . .12ERT403LV . . . . . . . . . . . . . . .18ERT403LVG . . . . . . . . . . . . . .18ERT404LV . . . . . . . . . . . . . . .19ERT413 . . . . . . . . . . . . . . . . .13ERT413WHT . . . . . . . . . . . . .13ERT501 . . . . . . . . . . . . . . . . .25ERT501WHT . . . . . . . . . . . . .25ERT510 . . . . . . . . . . . . . . . . .25ERT510WHT . . . . . . . . . . . . .25ERT512 . . . . . . . . . . . . . . . . .25ERT512WHT . . . . . . . . . . . . .25ERT513WHT . . . . . . . . . . . . .26ERT513 . . . . . . . . . . . . . . . . .26ERT513WHTTS . . . . . . . . . . .26ERT513TS . . . . . . . . . . . . . . .26ERT520G . . . . . . . . . . . . . . . .24ERT520WHT . . . . . . . . . . . . .24ERT520 . . . . . . . . . . . . . . . . .24ERT521 . . . . . . . . . . . . . . . . .24ERT521G . . . . . . . . . . . . . . . .24ERT560 . . . . . . . . . . . . . . . . .27ERT570 . . . . . . . . . . . . . . . . .27ERT570PB . . . . . . . . . . . . . . .27ERT571 . . . . . . . . . . . . . . . . .27ERT701 . . . . . . . . . . . . . . . . .49ERT701 . . . . . . . . . . . . . . . . .60ERT701 . . . . . . . . . . . . . . . . .76ERT702 . . . . . . . . . . . . . . . . .50ERT702 . . . . . . . . . . . . . . . . .61ERT702 . . . . . . . . . . . . . . . . .76ERT703 . . . . . . . . . . . . . . . . .50

ERT703 . . . . . . . . . . . . . . . . .61ERT703 . . . . . . . . . . . . . . . . .77ERT704 . . . . . . . . . . . . . .39, 48ERT704PB . . . . . . . . . . . .39, 48ERT704 . . . . . . . . . . .60, 70, 75ERT704PB . . . . . . . . . . . .70, 75ERT705 . . . . . . . .40, 50, 61, 70ERT706 . . . . . . . . . . . . . .49, 76ERT706 . . . . . . . . . . . . . . . . .76ERT707WHT . .37, 45, 57, 68, 74ERT707 . . . . . . . . .45, 57, 68, 74ERT708 . . . . . . . . . . .49, 60, 76ERT708 . . . . . . . . . . . . . . . . .60ERT709 . . . . . . . . . . . . . . . . .45ERT709WHT . . . . . . . . . .45, 57ERT709 . . . . . . . . . . . . . . . . .57ERT710G . . . .36, 44, 56, 68, 74ERT710 . . . . .36, 44, 56, 68, 74ERT711 . . . . . . . . . . . . . .39, 49ERT712 . . . . . . . . . . .36, 44, 56ERT712TS . . . . . . . . .36, 44, 56ERT713TS . . . . . . . . . . . .37, 46ERT713 . . . . . . . . . . . .37, 46, 58ERT713WHT . . . . . . .38, 46, 58ERT713WHTTS . . . . .38, 46, 58ERT713LTS . . . . . . . . .38, 47, 59ERT713L . . . . . . . . . . .38, 47, 59ERT714 . . . . . .39, 47, 59, 69, 75ERT714WHT . .39, 47, 59, 69, 75ERT716 . . . . . . . .41, 48, 69, 75ERT717 . . . . . . . . . . . . . . . . .48ERT717WHT . . . . . . . . . . . . .48ERT721 . . . . .40, 51, 62, 71, 77ERT723 . . . . .41, 51, 62, 71, 77ERT725 . . . . . . . . . . .40, 41, 52ERT725TS . . . . . .40, 41, 52, 63ERT725 . . . . . . . . . . . . . .52, 63ERT725WHT . . . . . . . . . .53, 63ERT725WHTTS . . . . . . . .53, 63ERT4980 . . . . . . . . . . . . .79, 81ERT4980WHT . . . . . . . . .79, 81ET400 . . . . . . . . . . . . . . . . . . .8ET400R . . . . . . . . . . . . . . . . . .9ET400LV . . . . . . . . . . . . . . . .14ET400LV . . . . . . . . . . . . . . . .15ET500 . . . . . . . . . . . . . . . . . .20ET500R . . . . . . . . . . . . . . . . .21ET700 . . . . . . . . . . . . . . . . . .42ET700R . . . . . . . . . . . . . . . . .43ET2700 . . . . . . . . . . . . . . . . .72ET2700 . . . . . . . . . . . . . . . . .73ET4700 . . . . . . . . . . . . . . . . .78

COOPER LIGHTING

ALL-PRO

83

Cooper Lighting1121 Highway 74 SouthPeachtree City, Georgia30269

P: 770-486-4800F: 770-486-4801

www.cooperlighting.com

International Sales USACooper Lighting1121 Highway 74 SouthPeachtree City, Georgia30269

P: 770-486-4800F: 770-486-4801

Canadian FacilitiesCooper Lighting5925 McLaughlin RoadMississauga, Ontario L5R 1B8

P: 905-507-4000F: 905-568-7049

.

The Cooper LightingFamily

HaloMetaluxLumarkSure-LitesNeo-RayCorelitePortfolioIrisShaperLumièreInvueMcGraw-EdisonioFail-SafeMWSDLSRSAAmetrix

USA FacilitiesCranbury, New JerseyElk Grove Village, IllinoisIrving, TexasOntario, CaliforniaPeachtree City, Georgia

Canadian FacilitiesCalgary, Alberta

Cooper Industries Ltd.600 Travis, Ste. 5800Houston, TX 77002-1001P: 713-209-8400www. cooperindustries.com

Cooper ConnectionYour Authorized Cooper LightingDistributor is:

ADV080555 Printed in USA

Halo, ALL-PRO, ALL-NAIL and AIR-TITE are valuable trademarks of Cooper Industries in the United States andother countries. You are not permitted to use the Cooper Trademarks without the proper written consent ofCooper Industries.

Documents

ALL-PRO - Cooper Industries 4 COOPERLIGHTING THE ALL-PRO ADVANTAGE Full Line of Housings •4",5",6"ApertureSizes •NewConstruction •AIR-TITE™ …