all information (ucic)

8/7/2019 all information (ucic)

http://slidepdf.com/reader/full/all-information-ucic 1/39

Technical Support Section

All Information For Annealed Plain Copper Conductor


M A N U F A C T U R I N G I N S T R U C T I O N S

DESC. : Cu/PVC/PVC 300/500 V W.O. # : 2/2011SIZE : 3 × 1.5 mm² Flex Specs. : BS 6500

Item code : U1T2-30800F-20202K-A

Constructional Details

Conductor : Soft Drawn Copper

Round Flexible conductor (Class 5)

1.5 ( 28 × 0.247 ) Lay Length** 25 mm - 1.60 39.16

Top Layer Right Hand (Z)

Insulation Layer : Phase: PV Nom. 0.70 3.00

24.20

Min. 0.62 -

3 Insulated Cores : G/Y, Blue & Brown -

6.48

-

Lay length 141 mm, Direction (Z)

Nom. 0.90

8.28 48.80

Min. 0.62

PVC M.B - PVC .5% (PVC Weight 2.78

TOTAL WEIGHT 112.16

*)Hypothetical **) L.L for Guidance Only.

Embossing details on outer sheath shall be in max. 50 cm spacing as follows:

N.B.:

The marking shall start at a distance of 50cm from the inner end of the cable.

The length marking shall start at one meter distance from the inner end of the cable.

Minimum Bending Radiu 66 mmThe Cutting Length shall 2000 ± 5%

Issued By : TE

Verified by : TDH

Revised & amended by : TDH,PRM,PM

echnical Support Enginee

Bashar Alwadyan

Thick.(mm)

Diam.(mm)

Weight(kg/km)

mm2

Sheathing: PVC TM2 - Black

EMBOSSING MESSAGE :UNITED CABLE - JORDAN 3×1.5 SQMM - (NYMHY)





CU/PVC/AWA/PVC

Size(mm²)Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathi

Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires Nominal (mm)

1.5 0.8 1 0.6 0.9 19 1.82.5 0.8 1 0.6 0.9 20 1.8

4 1 1 0.6 0.9 23 1.8

6 1 1 0.6 0.9 25 1.8

10 1 1 0.6 0.9 28 1.8

16 1 1 0.6 0.9 31 1.8

25 1.2 1 0.6 0.9 35 1.8

35 1.2 1 0.6 0.9 38 1.8

50 1.4 1 0.6 1.25 32 1.8

70 1.4 1 0.6 1.25 36 1.895 1.6 1 0.6 1.25 41 1.8

120 1.6 1 0.6 1.6 35 1.8

150 1.8 1 0.6 1.6 38 1.8

185 2 1 0.6 1.6 42 1.8

240 2.2 1 0.6 1.6 47 1.9

300 2.4 1 0.6 2 41 2

400 2.6 1.2 0.76 2 47 2.1

500 2.8 1.2 0.76 2 52 2.2

630 2.8 1.2 0.76 2 56 2.4

CU/PVC/PVC

Size(mm²)Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathi


1.5 0.8 - - - - 1.4

2.5 0.8 - - - - 1.4

4 1 - - - - 1.4

6 1 - - - - 1.4

10 1 - - - - 1.4

16 1 - - - - 1.4

25 1.2 - - - - 1.4

35 1.2 - - - - 1.4

50 1.4 - - - - 1.4

70 1.4 - - - - 1.4

95 1.6 - - - - 1.5

120 1.6 - - - - 1.5

150 1.8 - - - - 1.6

185 2 - - - - 1.7

240 2.2 - - - - 1.8

300 2.4 - - - - 1.9

400 2.6 - - - - 2





500 2.8 - - - - 2

630 2.8 - - - - 2





CU/XLPE/AWA/PVC

Size(mm²)Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathi


1.5 0.7 1 0.6 0.9 19 1.82.5 0.7 1 0.6 0.9 20 1.8

4 0.7 1 0.6 0.9 22 1.8

6 0.7 1 0.6 0.9 23 1.8

10 0.7 1 0.6 0.9 26 1.8

16 0.7 1 0.6 0.9 30 1.8

25 0.9 1 0.6 0.9 33 1.8

35 0.9 1 0.6 0.9 37 1.8

50 1 1 0.6 1.25 30 1.8

70 1.1 1 0.6 1.25 34.00 1.895 1.1 1 0.6 1.25 38 1.8

120 1.2 1 0.6 1.6 33 1.8

150 1.4 1 0.6 1.6 37 1.8

185 1.6 1 0.6 1.6 40 1.8

240 1.7 1 0.6 1.6 45 1.9

300 1.8 1 0.6 1.6 49 1.9

400 2 1.2 0.76 2 45 2.1

500 2.2 1.2 0.76 2 50 2.2

630 2.4 1.2 0.76 2 55 2.3

CU/XLPE/PVC

Size(mm²)Insulation (XLPE) Bedding (PVC) Armoring (G.Steel) Sheathi


1.5 0.7 - - - - 1.4

2.5 0.7 - - - - 1.4

4 0.7 - - - - 1.4

6 0.7 - - - - 1.4

10 0.7 - - - - 1.4

16 0.7 - - - - 1.4

25 0.9 - - - - 1.4

35 0.9 - - - - 1.4

50 1 - - - - 1.4

70 1.1 - - - - 1.4

95 1.1 - - - - 1.5

120 1.2 - - - - 1.5

150 1.4 - - - - 1.6

185 1.6 - - - - 1.6

240 1.7 - - - - 1.7

300 1.8 - - - - 1.8

400 2 - - - - 1.9





500 2.2 - - - -

630 2.4 - - - -





g (PVC)

Min. (mm)

1.241.24

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.241.24

1.24

1.24

1.24

1.32

1.4

1.48

1.56

1.72

g (PVC)

Min. (mm)

1.09

1.09

1.09

1.09

1.09

1.09

1.09

1.09

1.09

1.09

1.18

1.18

1.26

1.35

1.43

1.52

1.6





1.691.77





g (PVC)

Min. (mm)

1.241.24

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.241.24

1.24

1.24

1.24

1.32

1.32

1.48

1.56

1.64

g (PVC)

Min. (mm)

1.09

1.09

1.09

1.09

1.09

1.09

1.09

1.09

1.09

1.09

1.18

1.18

1.26

1.26

1.35

1.43

1.52





1.61.77





CU/PVC/SWA/PVC

Size(mm²)

Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathin


1.5 0.8 1 0.6 0.9 29 1.8

2.5 0.8 1 0.6 0.9 32 1.8

4 1 1 0.6 0.9 38 1.8

6 1 1 0.6 1.25 31 1.8

10 1 1 0.6 1.25 35 1.8

16 1 1 0.6 1.25 39 1.8

25 1.2 1 0.6 1.6 36 1.8

35 1.2 1 0.6 1.6 39 1.8

50 1.4 1 0.6 1.6 45 1.9

70 1.4 1 0.6 2 41 2

95 1.6 1.2 0.76 2 48 2.2

120 1.6 1.2 0.76 2 52 2.3

150 1.8 1.2 0.76 2.5 46 2.4

185 2 1.4 0.92 2.5 51 2.6

240 2.2 1.4 0.92 2.5 58 2.8

300 2.4 1.6 1.08 2.5 64 2.9

400 2.6 1.6 1.08 2.5 71 3.2

CU/PVC/PVC

Size(mm²)Insulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathin


1.5 0.8 - - - - 1.8

2.5 0.8 - - - - 1.8

4 1 - - - - 1.8

6 1 - - - - 1.8

10 1 - - - - 1.8

16 1 - - - - 1.8

25 1.2 - - - - 1.8

35 1.2 - - - - 1.8

50 1.4 - - - - 1.8

70 1.4 - - - - 1.9

95 1.6 - - - - 2

120 1.6 - - - - 2.1

150 1.8 - - - - 2.2

185 2 - - - - 2.4240 2.2 - - - - 2.5

300 2.4 - - - - 2.7





400 2.6 - - - -





CU/XLPE/SWA/PVC

Size(mm²)nsulation (XLPE Bedding (PVC) Armoring (G.Steel) Sheathin


1.5 0.7 1 0.6 0.9 28 1.8

2.5 0.7 1 0.6 0.9 31 1.8

4 0.7 1 0.6 0.9 34 1.8

6 0.7 1 0.6 0.9 38 1.8

10 0.7 1 0.6 1.25 32 1.8

16 0.7 1 0.6 1.25 37 1.8

25 0.9 1 0.6 1.6 34 1.8

35 0.9 1 0.6 1.6 37 1.8

50 1 1 0.6 1.6 42 1.8

70 1.1 1 0.6 1.6 48 2

95 1.1 1.2 0.76 2 45 2.1

120 1.2 1.2 0.76 2 49 2.2

150 1.4 1.2 0.76 2 55 2.3

185 1.6 1.4 0.92 2.5 49 2.5

240 1.7 1.4 0.92 2.5 55 2.7

300 1.8 1.6 1.08 2.5 61 2.8

400 2 1.6 1.08 2.5 68 3.1

CU/XLPE/PVC

Size(mm²)nsulation (XLPE Bedding (PVC) Armoring (G.Steel) Sheathin


1.5 0.7 - - - - 1.8

2.5 0.7 - - - - 1.8

4 0.7 - - - - 1.8

6 0.7 - - - - 1.8

10 0.7 - - - - 1.8

16 0.7 - - - - 1.8

25 0.9 - - - - 1.8

35 0.9 - - - - 1.8

50 1 - - - - 1.8

70 1.1 - - - - 1.8

95 1.1 - - - - 1.9

120 1.2 - - - - 2

150 1.4 - - - - 2.2

185 1.6 - - - - 2.3

240 1.7 - - - - 2.5300 1.8 - - - - 2.6

400 2 - - - - 2.9





g (PVC)

Min. (mm)

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.32

1.4

1.56

1.64

1.72

1.88

2.04

2.12

2.36

g (PVC)

Min. (mm)

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.52

1.6

1.69

1.77

1.942.03

2.2





2.37





g (PVC)

Min. (mm)

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.4

1.48

1.56

1.64

1.8

1.96

2.04

2.28

g (PVC)

Min. (mm)

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.52

1.6

1.77

1.86

2.032.11

2.37





CU/PVC/SWA/PVC

Size(mm²)

nsulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathi


1.5 0.8 1 0.6 0.9 31 1.8

2.5 0.8 1 0.6 0.9 34 1.8

4 1 1 0.6 1.25 30 1.8

6 1 1 0.6 1.25 32 1.8

10 1 1 0.6 1.25 37 1.8

16 1 1 0.6 1.25 42 1.8

25 1.2 1 0.6 1.6 33 1.8

35 1.2 1 0.6 1.6 36 1.8

50 1.4 1 0.6 1.6 42 2

70 1.4 1.2 0.76 2 39 2.1

95 1.6 1.2 0.76 2 44 2.2

120 1.6 1.2 0.76 2 47 2.3

150 1.8 1.4 0.92 2.5 43 2.5

185 2 1.4 0.92 2.5 47 2.7

240 2.2 1.6 1.08 2.5 52 2.9

300 2.4 1.6 1.08 2.5 58 3.1

400 2.6 1.8 1.24 3.15 52 3.4

CU/PVC/PVC

Size(mm²)nsulation (PVC) Bedding (PVC) Armoring (G.Steel) Sheathi


1.5 0.8 - - - - 1.8

2.5 0.8 - - - - 1.8

4 1 - - - - 1.8

6 1 - - - - 1.8

10 1 - - - - 1.8

16 1 - - - - 1.8

25 1.2 - - - - 1.8

35 1.2 - - - - 1.8

50 1.4 - - - - 1.8

70 1.4 - - - - 1.9

95 1.6 - - - - 2.1

120 1.6 - - - - 2.2

150 1.8 - - - - 2.3

185 2 - - - - 2.5240 2.2 - - - - 2.7

300 2.4 - - - - 2.8





400 2.6 - - - -





CU/XLPE/SWA/PVC

Size(mm²)nsulation (XLPE Bedding (PVC) Armoring (G.Steel) Sheathi


1.5 0.7 1 0.6 0.9 29 1.8

2.5 0.7 1 0.6 0.9 32 1.8

4 0.7 1 0.6 0.9 36 1.8

6 0.7 1 0.6 0.9 40 1.8

10 0.7 1 0.6 1.25 34 1.8

16 0.7 1 0.6 1.25 39 1.8

25 0.9 1 0.6 1.6 31 1.8

35 0.9 1 0.6 1.6 34 1.8

50 1 1 0.6 1.6 39 1.9

70 1.1 1.2 0.76 2 37 2

95 1.1 1.2 0.76 2 41 2.2

120 1.2 1.2 0.76 2 45 2.3

150 1.4 1.4 0.92 2.5 41 2.5

185 1.6 1.4 0.92 2.5 45 2.6

240 1.7 1.6 1.08 2.5 50 2.8

300 1.8 1.6 1.08 2.5 55 3

400 2 1.6 1.08 2.5 62 3.2

CU/XLPE/PVC

Size(mm²)nsulation (XLPE Bedding (PVC) Armoring (G.Steel) Sheathi


1.5 0.7 - - - - 1.8

2.5 0.7 - - - - 1.8

4 0.7 - - - - 1.8

6 0.7 - - - - 1.8

10 0.7 - - - - 1.8

16 0.7 - - - - 1.8

25 0.9 - - - - 1.8

35 0.9 - - - - 1.8

50 1 - - - - 1.8

70 1.1 - - - - 1.9

95 1.1 - - - - 2

120 1.2 - - - - 2.1

150 1.4 - - - - 2.3

185 1.6 - - - - 2.4

240 1.7 - - - - 2.6300 1.8 - - - - 2.7

400 2 - - - - 3





g (PVC)

Min. (mm)

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.4

1.48

1.56

1.64

1.8

1.96

2.12

2.28

2.52

g (PVC)

Min. (mm)

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.52

1.69

1.77

1.86

2.032.2

2.28





2.54





g (PVC)

Min. (mm)

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.24

1.32

1.4

1.56

1.64

1.8

1.88

2.04

2.2

2.36

g (PVC)

Min. (mm)

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.43

1.52

1.6

1.69

1.86

1.94

2.112.2

2.45





CU/PVC/SWA/PVC

Size(mm²)Insulation (PVC) Bedding (PVC) Armoring (G.Steel)

Nominal (mm) Nominal (mm) Min. (mm) size (mm) No. of wires

1.5 0.8 1 0.6 0.9 33

2.5 0.8 1 0.6 0.9 37

4 1 1 0.6 1.25 32

6 1 1 0.6 1.25 35

10 1 1 0.6 1.25 40

16 1 1 0.6 1.6 37

25 1.2 1 0.6 1.6 39

35 1.2 1 0.6 1.6 43

50 1.4 1.2 0.76 2 41

70 1.4 1.2 0.76 2 46

95 1.6 1.2 0.76 2.5 43

120 1.6 1.4 0.92 2.5 47

150 1.8 1.4 0.92 2.5 51

185 2 1.6 1.08 2.5 57

240 2.2 1.6 1.08 2.5 63

300 2.4 1.6 1.08 3.15 56

400 2.6 1.8 1.24 3.15 63

CU/PVC/PVC



1.5 0.8 - - - -

2.5 0.8 - - - -

4 1 - - - -

6 1 - - - -

10 1 - - - -

16 1 - - - -

25 1.2 - - - -

35 1.2 - - - -





50 1.4 - - - -

70 1.4 - - - -

95 1.6 - - - -

120 1.6 - - - -

150 1.8 - - - -

185 2 - - - -

240 2.2 - - - -

300 2.4 - - - -

400 2.6 - - - -





CU/XLPE/SWA/PVC

Size(mm²)

Insulation (XLPE) Bedding (PVC) Armoring (G.Steel)


1.5 0.7 1 0.6 0.9 32

2.5 0.7 1 0.6 0.9 35

4 0.7 1 0.6 0.9 39

6 0.7 1 0.6 1.25 32

10 0.7 1 0.6 1.25 37

16 0.7 1 0.6 1.6 34

25 0.9 1 0.6 1.6 37

35 0.9 1 0.6 1.6 41

50 1 1 0.6 1.6 47

70 1.1 1.2 0.76 2 44

95 1.1 1.2 0.76 2 49

120 1.2 1.4 0.92 2.5 44

150 1.4 1.4 0.92 2.5 49

185 1.6 1.4 0.92 2.5 54

240 1.7 1.6 1.08 2.5 61

300 1.8 1.6 1.08 2.5 67

400 2 1.8 1.24 3.15 61

CU/XLPE/PVC

Size(mm²)

Insulation (XLPE) Bedding (PVC) Armoring (G.Steel)


1.5 0.7 - - - -

2.5 0.7 - - - -

4 0.7 - - - -

6 0.7 - - - -

10 0.7 - - - -

16 0.7 - - - -

25 0.9 - - - -35 0.9 - - - -

50 1 - - - -





70 1.1 - - - -

95 1.1 - - - -

120 1.2 - - - -

150 1.4 - - - -

185 1.6 - - - -

240 1.7 - - - -

300 1.8 - - - -

400 2 - - - -





Sheathing (PVC)

Nominal (mm) Min. (mm)

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.9 1.32

2.1 1.48

2.2 1.56

2.4 1.72

2.5 1.8

2.7 1.96

2.9 2.12

3.1 2.28

3.3 2.44

3.6 2.68

Sheathing (PVC)


1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43





1.9 1.52

2 1.6

2.2 1.77

2.3 1.86

2.5 2.03

2.6 2.11

2.9 2.37

3.1 2.54

3.4 2.79





Sheathing (PVC)


1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.9 1.32

2 1.4

2.2 1.56

2.3 1.64

2.5 1.8

2.6 1.88

2.8 2.04

3 2.2

3.2 2.36

3.5 2.6

Sheathing (PVC)


1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.431.8 1.43

1.8 1.43





2 1.6

2.1 1.69

2.3 1.86

2.4 1.94

2.6 2.11

2.8 2.28

3 2.45

3.3 2.71





CU/PVC/SWA/PVC

Size(mm²)

Insulation (PVC) Bedding (PVC) Armoring (G.Steel)


1.5 0.8 1 0.6 0.9 36

2.5 0.8 1 0.6 0.9 40

4 1 1 0.6 1.25 35

6 1 1 0.6 1.25 39

10 1 1 0.6 1.6 35

16 1 1 0.6 1.6 40

25 1.2 1 0.6 1.6 46

35 1.2 1 0.6 2 41

50 1.4 1.2 0.76 2 48

70 1.4 1.2 0.76 2 54

95 1.6 1.4 0.92 2.5 51

120 1.6 1.4 0.92 2.5 55

150 1.8 1.6 1.08 2.5 62

185 2 1.6 1.08 2.5 68

CU/PVC/PVC

Size(mm²)Insulation (XLPE) Bedding (PVC) Armoring (G.Steel)


1.5 0.8 - - - -

2.5 0.8 - - - -

4 1 - - - -

6 1 - - - -

10 1 - - - -

16 1 - - - -

25 1.2 - - - -

35 1.2 - - - -

50 1.4 - - - -

70 1.4 - - - -

95 1.6 - - - -

120 1.6 - - - -

150 1.8 - - - -

185 2 - - - -





CU/XLPE/SWA/PVC

Size(mm²)Insulation (XLPE) Bedding (PVC) Armoring (G.Steel)


1.5 0.7 1 0.6 0.9 34

2.5 0.7 1 0.6 0.9 38

4 0.7 1 0.6 1.25 31

6 0.7 1 0.6 1.25 35

10 0.7 1 0.6 1.25 41

16 0.7 1 0.6 1.6 37

25 0.9 1 0.6 1.6 43

35 0.9 1 0.6 1.6 48

50 1 1.2 0.76 2 45

70 1.1 1.2 0.76 2 52

95 1.1 1.4 0.92 2.5 48

120 1.2 1.4 0.92 2.5 53

150 1.4 1.4 0.92 2.5 59

185 1.6 1.6 1.08 2.5 65

CU/XLPE/PVC



1.5 0.7 - - - -

2.5 0.7 - - - -

4 0.7 - - - -

6 0.7 - - - -

10 0.7 - - - -

16 0.7 - - - -

25 0.9 - - - -

35 0.9 - - - -

50 1 - - - -

70 1.1 - - - -

95 1.1 - - - -

120 1.2 - - - -

150 1.4 - - - -

185 1.6 - - - -





Sheathing (PVC)


1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.9 1.32

2 1.4

2.2 1.56

2.3 1.64

2.5 1.8

2.7 1.96

2.9 2.12

3 2.2

Sheathing (PVC)


1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.9 1.52

2 1.6

2.2 1.77

2.3 1.86

2.5 2.03

2.6 2.11

2.8 2.28





Sheathing (PVC)


1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.8 1.24

1.9 1.32

2.1 1.48

2.3 1.64

2.5 1.8

2.6 1.88

2.8 2.04

3 2.2

Sheathing (PVC)


1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.9 1.52

2.1 1.69

2.2 1.77

2.4 1.94

2.6 2.11

2.7 2.2





CU/XLPE/SWA/PVC

Size(mm²)Insulation (XLPE) ize(mm²)nsulation (XLPE) Bedding (PVC) Armoring (G.Steel)

PH⁰ ominal (mm) PH NE⁰ ominal (mm) NENominal(mm)Min.(mm)size (mm) o.of wire

16 0.7 10 0.7 1 0.6 1.25 41

25 0.9 16 0.7 1 0.6 1.6 36

35 0.9 16 0.7 1 0.6 1.6 40

50 1 25 0.9 1 0.6 1.6 46

70 1.1 35 0.9 1.2 0.76 2 43

95 1.1 50 1 1.2 0.76 2 48

120 1.2 70 1.1 1.2 0.76 2 53

150 1.4 70 1.1 1.4 0.92 2.5 48

185 1.6 95 1.1 1.4 0.92 2.5 53

240 1.7 120 1.2 1.6 1.08 2.5 59

300 1.8 150 1.4 1.6 1.08 2.5 65

400 2 185 1.6 1.6 1.08 3.15 59

CU/XLPE/PVC

Size(mm²)Insulation (XLPE) ize(mm²)nsulation (XLPE) Bedding (PVC) Armoring (G.Steel)

PH⁰ ominal (mm) PH NE⁰ ominal (mm) NENominal(mm)Min.(mm)size (mm) o.of wire

16 0.7 10 0.7 - - - -

25 0.9 16 0.7 - - - -

35 0.9 16 0.7 - - - -

50 1 25 0.9 - - - -

70 1.1 35 0.9 - - - -

95 1.1 50 1 - - - -

120 1.2 70 1.1 - - - -

150 1.4 70 1.1 - - - -

185 1.6 95 1.1 - - - -

240 1.7 120 1.2 - - - -

300 1.8 150 1.4 - - - -

400 2 185 1.6 - - - -





Sheathing (PVC)

ominal(mm)Min.(mm)

1.8 1.24

1.8 1.24

1.8 1.24

1.9 1.32

2.1 1.48

2.2 1.56

2.4 1.72

2.5 1.8

2.7 1.96

2.9 2.12

3 2.2

3.3 2.44

Sheathing (PVC)

ominal(mm)Min.(mm)

1.8 1.43

1.8 1.43

1.8 1.43

1.8 1.43

1.9 1.52

2.1 1.69

2.2 1.77

2.3 1.86

2.5 2.03

2.6 2.11

2.8 2.28

3.1 2.54





Nominal Area No.of iameter of

pprox. Weight Max conductor Max conductor

of conductor resistance at 20⁰ esistance at 20

(mm²) wires wire (mm) (Kg/Km) (ohm/km) Process (ohm/km) Final

1 7 0.44 8.5 16.92 18

1.5 7 0.53 13 11.37 12.1

2.5 7 0.67 22 6.96 7.41

4 7 0.85 34 4.38 4.61

6 7 1.04 53 2.96 3.08

10 7 1.35 88 1.76 1.83

16 7 1.7 142 1.1 1.15

25 7 2.25 225 0.71 0.73

35 7 2.66 315 0.51 0.52

50 7 3.05 425 0.38 0.39

70 19 2.25 605 0.26 0.27

95 19 2.66 850 0.19 0.19

120 37 2.13 1060 0.1499 0.15

150 37 2.35 1325 0.1215 0.12

185 37 2.66 1645 0.0971 0.1

240 37 3 2150 0.0739 0.08

300 37 3.35 2690 0.0589 0.06

400 61 3.02 3450 0.0461 0.05

500 61 3.32 4350 0.0359 0.04

630 61 3.75 5580 0.03 0.03

28/2/2010 AMD 1





Nominal Area

Max conductor

esistance at 20

(mm²) (ohm/km) Final

1 18

1.5 12.1

2.5 7.41

4 4.61

6 3.08

10 1.83

16 1.15

25 0.73

35 0.52

50 0.39

70 0.27

95 0.19

120 0.15

150 0.12

185 0.1

240 0.08

300 0.06

400 0.05

500 0.04

630 0.03

28/2/2010 AMD 1





Nominal AreaNo.of iameter of pprox. Weight Max. conductor Max. conductor

of conductor resistance at 20⁰ esistance at 20

(mm²) wires wire (mm) (Kg/Km) (ohm/km) Process (ohm/km) Final16 7 1.72 42 1.872 1.910

25 7 2.16 67 1.176 1.200

35 7 2.52 92 0.851 0.868

50 7 3 127 0.628 0.641

70 19 2.16 183 0.434 0.443

95 19 2.54 253 0.314 0.320

120 37 19 2.85 2.07 320 0.248 0.253

150 37 19 3.2 2.3 391 0.202 0.206

185 37 2.54 491 0.161 0.164

240 37 2.92 644 0.123 0.125

300 37 3.29 802 0.098 0.100

400 61 3 1040 0.076 0.078

500 61 3.29 1320 0.059 0.061

630 61 3.75 1738 0.046 0.047

Technicl Support Department





Technical Particulars & Guarantees

Description Unit Proposed Values

Size 4×95

Description - Cu/XLPE/SWA/LSOH

Reference Standard - IEC 60502-1

Maximum Permissible Continuous Conductor Te °C 90

Maximum Permissible Continuous Temp. of Oute °C 90

Rated Voltage V 600 / 1000

Number & Nominal Diameter of Wires No. × mm 19 × 2.66

Shape of Conductor - Sector compacted conductor

Conductor Material - Annealed Copper Class (2)

Insulation Material - XLPE - NORMAL

Average Thickness of Insulation mm 1.10

Core Identification - Red, Yellow, Blue & Black

Inner Sheath Material - PVC

Approximate Thickness of Bedding mm 1.20

Armouring GSWA-(Multi Core),AWA-(Single Coreo. × Dia (m 49 × 2.00

Outer sheath Material - PVC ST8 - BLACK

Nominal Thickness of Outer sheath mm 2.30

Ω/km 0.1930

Ω/km 0.25

Approx.Inductive Reactance at 50 Hz Ω/km 0.078

Conductor Impedance at Maximum Operating Te Ω/km 0.26

Amp 305

Amp 303

Short Circuit Current Rating Based on Max. Cond. kA 13.59

Approximate Over all Diameter mm 41.38

Minimum Bending Raduis mm 331

Mass per Kilometer of Complete Cable Kg 5520.59

Nominal Drum Length ± 5% / Drum Type m/Drum 500

EMBOSSING MESSAGE : UNITED CABLE -UCIC- 4×95 SQMM Cu/XLPE/SWA/LSOH 600/1000 V IEC

Issued By

Technical Support Department

Eng.Bashar Alwadyan

No. × mm2

Approx.Max. DC Resistance at 20o C

Approx.Max. AC Resistance at MaximumOperating Tempreture

Approx.Current Carrying Capacity at 30 °C in Air(3-Φ)- Multi Core

Approx.C.C.C at (20 °C, 1.0 K m/W, 0.7mt. DOL)in Ground (3-Φ)- Multi Core

Documents

all information (ucic)