X3

PQ

0 100

6channels

Numerous counterstotal counter order countertool counter etc.

ProcessMonitoringSpecific monitoring methods protect machine and tools and recognize even the smallest failures.

Stop & Go Diagramrecords the running and downtime and creates the „fever chart“ of the plant.

QuattromaticSpecial monitoring program to enhance product quality.

Device protocolDetailed failure information about cause, location and correction. Downtime is significantly reduced.

Machine and tool protection Reduced tool costsReduced consequential costsReduced downtime

Quality 100% In-Process Control

Process optimizationReduced machine stops Stable processes

ProductivityIncreased utilizationIncreased quantitiesLonger tool life

Ghost shiftProduction during breaksUnmanned shiftsExtra shifts

Benefits

All-in-one monitoring for metal formingCompact system with up to 6 monitoring channels and a 9“ touch screen

Monitoring channels6 channels monitor maximum force, envelope curves, trend etc. for all forming processes.

Process qualityThe PQ factor - a reliable indicator for the quality of the entire process.

CockpitDetailed process information at-a-glance.

© Copyright 2016 BRANKAMP GMBH (Germany) – All rights are reserved.

BRANKAMP GmbH and BRANKAMP product names and signs mentioned or shown herein are registered trademarks. The rights, if any, of third parties on trademarks or registered trademarks

mentioned in the present publication are acknowledged to the respective owners.BRANKAMP has a quality management system, attested by ISO 9001 certifi cation.

www.brankamp.comwww.marposs.com

X3

© Copyright 2016 BRANKAMP GMBH (Germany) – All rights are reserved.

BRANKAMP GmbH and BRANKAMP product names and signs mentioned or shown herein are registered trademarks. The rights, if any, of third parties on trademarks or registered trademarks

mentioned in the present publication are acknowledged to the respective owners.BRANKAMP has a quality management system, attested by ISO 9001 certifi cation.

www.brankamp.comwww.marposs.com

Monitoring functionsMaximum force monitoringEnvelope curve monitoringTrend monitoringGhostshift monitoringTotal counterOrder counterTool counterSPC counterStop & GoDevice protocolSortingDosingNetworkingProcess quality displayAdapt

OptionsSave & RescueZoom channels Tool memoryOptimizer

EquipmentLarge 9“ TFT Touch ScreenEMC-compliant, ergonomic housingLED warning elementsBDE Terminal functionFactoryNet

Technical DataMonitoring 1-6 analog inputs

16 digital inputs/outputsPower 24 V / DC / 23 WattEnviroment temp. +5 °C to + 40 °CInterface 1 network TCP/IPDimensions 300 x 260 x 206 mm

11.81 x 10.23 x 8.11 inches (W x H x D)

Weight 5 kg (11 lbs)

Please note: The above functions are optional, even if not specifically stated. Technical details subject to changes without notice.

Production reportStop & Go automatically records the run and downtime behaviour of the machine.

Benefit: The indication of dowtime clearly show the optimization potentials of the plant.

CockpitOverview of the following monitoring features:• Counters• Maximum values• Trend / tool protection• Envelope curve

Benefit: All process info at-a-glance.

Tool memoryInternal tool and article data storage for precise machine setup in case of repeated production.

Benefit: Time-saving and perfect setup.

Zoom channelsIndividual process areas can be monitored in detail. As a matter of fact the zoom has the same number of scanning points as the entire curve.

Benefit: Particularly sensitive manufacturing segments are optimally monitored.

Multi-ChannelVisualization of six monitoring channels make the process more transparent.

Benefit: Comprehend relationships faster.

ODN6B02EN00 Edition 1/2016 – Specifications are subject to modifications.