Product FeaturesThe material of ALH-0.66 I current transformer housing is high-strength PC plastic in fully enclosed structure. It is compatible for square and round holes for cable or bus. It shall be normally used for control, protection and measurement. P1 and P2 refer to the primary polarity end; S1 and S2 refer to the secondary polarity end.P1, S1 and P2, S2 are dotted terminals (subtractive polarity).

Unit:mm

Model definition

Cable through numberCapacityAccuracy classCurrent ratioType (see the table below)Rated voltage 660V (equivalent to 690V)Registration approval model

Specifications and dimensions

U-shape opening of the support

Support

External sizeDimensions

Specifications and models

Perforation size Installation methods (page 9)Note: “/” refers to the installation method not available

Installation size

Technical DataPrimary current 5-3000A secondary current 5A,1ARated voltage AC 660VRated frequency 50-60HzAmbient temperature -30 ℃ - +70 ℃ Maximum temperature resistance 120℃

1234

Altitude ≤3000mPower frequency withstand voltage 3000V 1min 50Hz (between the housing and the secondary coil )Insulation class E

56

7

ALH-0.66 I Current Transformer Siemens APT

Technical Data Table

Specifications andmodels

Accuracy class

Rated current ratio

Cable through num.

Available busbar specifications and quantity

Rated capacity（VA）

Note: The blanks without capacity can be realized by core-through or model not available.

How to install?

Fig. A Bent sheet short bar fixation

Fig. D Single sheet platen fixation (bent sheet)

Fig. G Matched bottom rail fixation

Fig. B Straight sheet long bar fixation

Fig. E Double sheet platen fixation

Fig. H Dead plate fixation

Fig. F Guide rail fixation

Fig. C Single sheet platen fixation (straight sheet)

Fig. I Bus fixation Fig. J Busbar fixation

ALH-0.66 Series Current Transformer

Installation CautionThe secondary winding of current transformer cannot be open circuit, otherwise, the high voltage may endanger the equipment and personal safety.One end of the secondary side of current transformer shall be reliable grounding to avoid insulation breakdown between the primary and the secondary.The current transformer shall be used strictly based on the rated power, the rated transformation ratio and the accuracy class on the nameplate.The primary winding of current transformer and the tested circuit shall be in series, the secondary winding and the electrical measuring instrument shall be in series, and the polarity of current transformer shall be noted during wiring.The connecting lead for secondary loop shall adopt the insulated wire with small resistance, without any connectors in the center.The impedance of instrument connected in series with the secondary winding loop shall not exceed that specified in the technical standards.The same current transformer shall not be used for relay protection and electricity measurement.

1.

2.

3.

4.

5.

6.

7.

Order instructionThe current transformer’s model, specification, current ratio, accuracy class and the secondary rated capacity shall be specified;Specify the installation methods. (If not specified, the company can provide as per its regulations.)It can be customized for special specifications.

1.

2.3.

School, hospital and office buildingNational large public buildings

Shanghai New International Expo CenterShanghai maglev train line

China Millennium Monument in BeijingOriental Pearl TV Station

Shanghai StadiumSichuan 703 TV Tower

Shanghai Maritime UniversityShanghai International Studies UniversityNational Radio and Television BuildingNew Office Building for the Ministry of Foreign AffairsShanghai Ruijin HospitalShanghai Sixth People's Hospital

Airport, port and metroPower plant, power station and electric utility

Huaneng Yuhuan Power Plant (4×1000MW)Shazhou Power Plant (2×600MW)

Guodian Changzhou Power Plant (2×600MW)Fujian Ningde Power Plant (2×600MW)Jiangsu Tianwan Nuclear Power Station

Daya Bay Nuclear Power PlantSichuan Ertan Power Plant

Capital International AirportShenyang Taoxian International AirportShanghai Pudong International AirportNingbo Bukchang portNanjing Metro Lines 1 and 2Shanghai Pearl Line (light rail) Phases 1 and 2Shenzhen Metro Line 1

Others Petroleum, metallurgy and chemistry

Shanghai Baoshan Iron and Steel PlantShanghai Jinshan Petrochemical

Wuhan Iron and Steel PlantRelocation Project of Shougang Group

Reconstruction Project of Sichuan Dagang

Xinjiang Shihezi ProjectShandong Heavy Machinery PlantShanghai Zhenhua Port Machinery Co., Ltd.Workshop for Shanghai Lili Industrial Workshop for Guangzhou Perlos/Liteonmobile

Application project cases