Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Air drying tunnel LDT-140
Operating principleThe Sormac air drying tunnel was developed specifically for drying delicate leafy vegetables and for creating a low attached moisture percentage with leafy vegetables.
Before reaching the drying tunnel, the product goes through a preliminary de-watering step by means of a de-watering belt. In the drying tunnel, the product is dried in an air stream that is oriented upwards, at a temperature of 25 to 30 ºC. The air speed is such that the product will float, causing as much moisture as possible to be released.
The air stream that is in circulation is cooled down in a heat exchanger to a temperature of approx. 5 ºC. Some of the water vapour is removed from the air stream because it condenses on the cold fins of the heat exchanger.
To enable the air to absorb moisture again, it is passed through a second heat exchanger where it is warmed up to a temperature of 25 to 30 ºC, lowering its relative humidity.
While drying the product, the air cools down due to the evaporation of the surface water on the product. This effect keeps the product much cooler than the drying air.
The air is cooled down and warmed up by using a glycol solution or a similar medium of approx. 0 ºC and, respectively, 33 ºC. This medium is supplied by the client or produced using a separate cooling installation.The cooling machine can be used as a heat pump to achieve considerable energy savings.
The air drying tunnel enables moisture values of less than 2% on the surface of the product to be reached.
Product specificationThe air drying tunnel is ideally suitable for delicate leafy vegetables such as spinach and baby leaf, but also for cut iceberg lettuce, etc.
Options ■ cooling system / heat pump ■ de-watering belt ■ integrated cooling section
Sormac B.V. Alterations reservedP.O. Box 419 T +31 (0)77 351 84 44NL-5900 AK Venlo F +31 (0)77 320 48 01
Huiskensstraat 68 E [email protected] PN Venlo I www.sormac.nl
Technical data
* exclusive cooling** capacities based on 8% incoming and 1% exiting attached moisture
LDT-140/8
230/400V, 50/60 Hz
57 kW
10,190 x 3,835 x 3,715 mm
max. 3,050 kg/ hr max. 1,855 kg/ hr max. 1,585 kg/ hr
8,000 mm
Type:
Voltage:
Installed power*:
Dimensions (LxWxH):
Capacity**:Iceberg lettuceSpinachBaby leaf
Tunnel lenght (LT):
LDT-140/6
230/400V, 50/60 Hz
42 kW
8,190 x 3,835 x 3,715 mm
max. 2,290 kg/hr max. 1,390 kg/ hr max. 1,190 kg/ hr
6,000 mm
LDT-140/7
230/400V, 50/60 Hz
48 kW
9,190 x 3,835 x 3,715 mm
max. 2,670 kg/ hr max. 1,620 kg/ hr max. 1,385 kg/ hr
7,000 mm