AERIAL EQUIPMENT SFS AGRICULTURAL TRACTORS CSBTS AIR POLLUTION ISO ALLOYS …library.tisi.go.th/downloadable/new_release/24_oct-dec5… · · 2008-01-25ALLOYS SAE International

TISI Library Accession List (October- December 2007)

AERIAL EQUIPMENT SFS

SFS 5740 2007 Telecommunication cables, foam PE-insulated an PE-sheathed filled aerial cable VMOHBUK-TL /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

AGRICULTURAL TRACTORS CSBTS

GB/T 2778 2007 Power take-off pulley for agricultural tractors - Peripheral speed and width /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

AIR POLLUTION ISO

ISO 16740 2005 Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ALLOYS SAE International

SAE HS 1086 2004 Metals & alloys in the Unified Numbering System /By Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM). 10th ed. Warrendale: SAE International, 2004.

ALUMINIUM CSBTS

GB/T 2085.1 2007 Aluminium powder - P.1: Air atomized aluminium powder /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB/T 2085.2 2007 Aluminium powder - P.2: Inflammable fine aluminium powder /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

TISI Library Accession List (Oct-Dec 2007) Page 1

GB/T 3250 2007 Aluminium and aluminium alloys shear test method for rivet wire and rivets and riveting test method for rivet wire /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

ALUMINIUM ALLOYS CSBTS

GB/T 3199 2007 Wrought aluminium and aluminium alloy products - Packing, marking, transporting and storing /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.


ALUMINIUM ORES SAA

AS 2806.1 2003 Aluminium ores - Sampling - P.1: Sampling procedures /By Standards Australia (SAA). New South Wales: SAA, 2003.

AS 2806.4 2004 Aluminium ores - Sampling - P.4: Determination of heterogeneity of constitution /By Standards Australia (SAA). New South Wales: SAA, 2004.

AS 2806.7 2004 Aluminium ores - Sampling - P.7: Determination of quality variation /By Standards Australia (SAA). New South Wales: SAA, 2004.

ALUMINIUM OXIDE SAA

AS 2879.5 2004 Alumina - P.5: Determination of angle of flow /By Standards Australia (SAA). New South Wales: SAA, 2004.

ALUMINIUM POWDER CSBTS

GB/T 2085.1 2007 Aluminium powder - P.1: Air atomized aluminium powder /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB/T 2085.2 2007 Aluminium powder - P.2: Inflammable fine aluminium powder /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.


ALUMINIUM PRODUCTS CSBTS GB/T 3199 2007 Wrought aluminium and aluminium alloy products - Packing, marking, transporting and storing

/By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

AMMONIUM INORGANIC COMPOUNDS CSBTS GB/T 3460 2007 Ammonium molybdate /By China State Bureau of Quality and Technical Supervision (CSBTS).

Beijing: CSBTS, 2007.

ANIMAL FATS ISO

ISO 17932 2005 Animal and vegetable fats and oils - Determination of the deterioration of bleachability index (DOBI) /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ANIMAL OILS ISO

ISO 17932 2005 Animal and vegetable fats and oils - Determination of the deterioration of bleachability index (DOBI) /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ANODES ISO

ISO 12986-2 2005 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - P.2: Determination of flexural strength by the four-point method /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 12988-2 2004 Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - P.2: Thermogravimetric method /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ARC-WELDING EQUIPMENT ISO ISO 17634 2004 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-

resisting steels - Classification /By International Organization for Standardization (ISO). Geneva: ISO, 2004.


ASBESTOS CEMENT AWWA

ANSI/AWWA C400 2003 Asbestos-cement pressure pipe, 4 in. through 16 in. (100 mm through 400 mm), for water distribution systems /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2003.

ANSI/AWWA C401 2003 The selection of asbestos - cement pressure pipe, 4 in. through 16 in. (100 mm through 400 mm), for water distribution systems /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2003.

ANSI/AWWA C402 2005 Asbestos - cement transmission pipe, 18 in. through 42 in. (450 mm through 1,050 mm) for water supply service /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA C403 2005 The selection of asbestos-cement transmission pipe, sizes 18 in. through 42 in. (450 mm through 1,050 mm), for water supply service /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ASPHALTS SAA

AS 2891.5 2004 Methods of sampling and testing asphalt - P.5: Determination of stability and flow - Marshall procedure /By Standards Australia (SAA). New South Wales: SAA, 2004.

ATMOSPHERIC CORROSION ISO

ISO 10062 2006 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ATMOSPHERIC CORROSION - ALLOYS ISO



ATMOSPHERIC CORROSION - ANODIC COATING ISO


ATMOSPHERIC CORROSION - METALS ISO


ATMOSPHERIC PRESSURE SAA

AS 2872 2000 Atmospheric heating of vessels containing fluids - Estimation of maximum temperature /By Standards Australia (SAA). New South Wales: SAA, 2000.

AUTOMATIC CONTROL SYSTEMS NFPA

NFPA 72 2007 National fire alarm code /By National Fire Protection Association (NFPA). Quincy: NFPA, 2007.

BARS (MATERIALS) - STEELS CSBTS GB/T 1220 2007 Stainless steel bars /By China State Bureau of Quality and Technical Supervision (CSBTS).

Beijing: CSBTS, 2007. GB/T 1221 2007 Heat-resistant steel bars /By China State Bureau of Quality and Technical Supervision (CSBTS).

Beijing: CSBTS, 2007. GB/T 3462 2007 Bars and plate blanks of molybdenum /By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2007.

BIOLOGICAL ANALYSIS AND TESTING ISO

ISO 10993-2 2006 Biological evaluation of medical devices - P.2: Animal welfare requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.


ISO 10993-6 2007 Biological evaluation of medical devices - P.6: Tests for local effects after implantation /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO/TS 10993-19 2006 Biological evaluation of medical devices - P.19: Physico-chemical, morphological and topographical characterization of materials /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO/TS 10993-20 2006 Biological evaluation of medical devices - P.20: Principles and methods for immunotoxicology testing of medical devices /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

BIOLOGICAL INDICATORS ISO

ISO 11138-4 2006 Sterilization of health care products - Biological indicators - P.4: Biological indicators for dry heat sterilization processes /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

BIOTECHNOLOGY SAA

AS/NZS 2647 2000 Biological safety cabinets - Installation and use /By Standards Australia (SAA). New South Wales: SAA, 2000.

BLOCKS SFS

SFS 7013 2007 Require properties and levels for different applications of concrete flue blocks /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

BOARD (PAPER) ISO

ISO 1924-3 2005 Paper and board - Determination of tensile properties - P.3: Constant rate of elongation method (100 mm/min) /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

BOILERS - CODES NFPA

NFPA 85 2004 Boiler and combustion systems hazards code /By National Fire Protection Association (NFPA). Quincy: NFPA, 2004.


BOILERS - MATERIALS SPECIFICATION NFPA


BOILERS - TESTING

NFPA


BUILDING CODES

ACI

ACI 318/318R 2005 Building code requirements for structural concrete (ACI 318-05) and Commentary (ACI 318R-05) /By American Concrete Institute (ACI). Farmington Hills: ACI, 2005.

BUILDING MATERIALS

IHS

CGSB Database /By Canadian General Standards Board (CGSB) and Information Handling Services (IHS). IHS, 2006.

BUILDINGS

ISO

ISO 16484-3 2005 Building automation and control systems (BACS) - P.3: Functions /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

BURIED PIPES

SFS

SFS 6000-8-814 2007 Low-voltage electrical installations - P.8-814: Supplementary requirements for certain special installations - Installation of buried cables /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

BURNERS

UL

UL 94 2006 Tests for flammability of plastic materials for parts in devices and appliances /By Underwriters Laboratories Inc. (UL). Northbrook: UL, 2006.


CABLE SHEATHS SFS

SFS 3157 2007 Telecommunication cables, PE-insulated and PE-sheathed drop wires MU 1 x 4 x 0,8 and MHBU 1 x 4 x 0,8 /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

CABLES JUNCTIONS SFS


CALIBRATION NSCL International

ANSI/NCSL Z540.1 1994 (R2002) American National Standard for Calibration - Calibration laboratories and measuring and test equipment - General requirements /By NSCL International and American National Standards Institute (ANSI). Boulder: NSCL International, 2002.

CAMPING EQUIPMENT ISO

ISO 10966 2005 Sports and recreational equipment - Fabrics awnings and camping tents - Specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

CARBON BLACK ISO

ISO 1138 2007 Rubber compounding ingredients - Carbon black - Determination of sulfur content /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

CATHODES ISO

ISO 12986-2 2005 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - P.2: Determination of flexural strength by the four-point method /By International Organization for Standardization (ISO). Geneva: ISO, 2005.


CATHODIC PROTECTION ISO

ISO 12473 2006 General principles of cathodic protection in sea water /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

CERAMICS SFS

SFS 7009 2007 Clay/ceramic flue components - Requirements and test method /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

CHAIN SAWS CSBTS GB 3883.14 2007 Safety of hand-held motor-operated electric tools - P.14: Particular requirements for chain saws

/By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007. ISO ISO 13772 2004 Forestry machinery - Portable chain-saws - Non-manually actuated chain brake performance /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005. SAA AS 2726.1 2004 Chainsaws - Safety requirements - P.1: Chainsaws for general use /By Standards Australia (SAA).

New South Wales: SAA, 2004. AS 2726.2 2004 Chainsaws - Safety requirements - P.2: Chainsaws for tree service /By Standards Australia (SAA).

New South Wales: SAA, 2004.

CHAINS ISO

ISO 13203 2005 Chains, sprockets and accessories - List of equivalent terms /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

CHAINWHEELS ISO

ISO 13203 2005 Chains, sprockets and accessories - List of equivalent terms /By International Organization for Standardization (ISO). Geneva: ISO, 2005.


CHEMICAL ANALYSIS AATCC

AATCC 2007 Technical manual of the American Association of Textile Chemists and Colorists /By American Association of Textile Chemists and Colorists (AATCC). Research Triangle Park: AATCC, 2006.

CHEMICAL COMPOSITION CSBTS

GB/T 3620.2 2007 Titanium and titanium alloys - Permissible variations of chemical composition for wrought product analysis /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

CHEMICAL ENGINEERING IHS GOST - GOSE Russian standards Database /By State Committee of the Russian Federation for Standardization

and Metrology (GOST E) and Information Handling Services (IHS). Englewood: IHS, 2007. AIChE Database /By American Institute of Chemical Engineers and Information Handling Services (IHS).

Englewood, Information Handling Services,2007.

CHEMICAL INDICATORS ISO ISO 11140-3 2007 Sterilization of health care products - Chemical indicators - P.3: Class 2 indicator systems for

use in the Bowie and Dick-type steam penetration test /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO 11140-4 2007 Sterilization of health care products - Chemical indicators - P.4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO 11140-5 2007 Sterilization of health care products - Chemical indicators - P.5: Class 2 indicators for Bowie and Dick-type air removal tests /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

CHEMICAL INDUSTRY ISO

AIChE Database /By American Institute of Chemical Engineers and Information Handling Services (IHS). Englewood, Information Handling Services,2007.


CHEMICAL LABORATORIES ISO

AIChE Database /By American Institute of Chemical Engineers and Information Handling Services (IHS). Englewood, Information Handling Services,2007.

CHIMNEYS SFS

SFS 7010 2007 Requirements for metal chimneys and connecting pipes /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


CLAMPED PIPE CONNECTIONS SFS

SFS 5400 2007 Pipe supporting. Pipe clamps DN 15...500 for FRP pipes standardized according to inside diameter and for FRP reinforced thermoplastics pipes /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


SFS 5402 2007 Pipe supporting. Pipe clamps DN 16...560 for thermoplastics pipes standardized according to outside diameter /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.







CLAMPING FLANGES - ELECTRIC CONDUCTORS SFS SFS 2651 2007 Overhead line accessories, Fasteners HKK and stay clamps HLK for stay rope /By Finnish

Standards Association (SFS). Helsinki: SFS, 2007.

CLAY SFS SFS 7009 2007 Clay/ceramic flue components - Requirements and test method /By Finnish Standards Association

(SFS). Helsinki: SFS, 2007.

COLD ROLLED PRODUCTS CSBTS GB/T 3280 2007 Cold rolled stainless steel plate, sheet and strip /By China State Bureau of Quality and Technical


COMBUSTION PRODUCTS NFPA NFPA 30 2003 Flammable and combustible liquids code /By National Fire Protection Association (NFPA).

Quincy: NFPA, 2003.

CONCRETE VIBRATORS CSBTS GB 3883.12 2007 Safety of hand-held motor-operated electric tools - P.12: Particular requirements for concrete

vibrators /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

CONCRETES ACI ACI 318/318R 2005 Building code requirements for structural concrete (ACI 318-05) and Commentary (ACI

318R-05) /By American Concrete Institute (ACI). Farmington Hills: ACI, 2005.

CONDENSERS CSBTS GB/T 3625 2007 Titanium and titanium alloy tube for condensers and heat exchangers /By China State Bureau of

Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.


CONDUITS (HYDRAULIC) AWWA

ANSI/AWWA C750 2003 Transit-time flowmeters in full closed conduits /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2003.

CONFORMITY ASSESSMENT ISO

ISO 08-136911 2007 Conformity assessment - Certification and Inspection bodies /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2007.

CONSTRUCTION IHS

CGSB Database/By Canadian General Standards Board (CGSB). Englewood: Information Handling Services, 2006.

CONSTRUCTION SYSTEMS PARTS SAA

AS 2876 2000 Concrete kerbs and channels (gutters) - Manually or machine placed /By Standards Australia (SAA). New South Wales: SAA, 2000.

CONTRACEPTIVE DEVICES ISO ISO 16038 2005 Rubber condoms - Guidance on the use of ISO 4074 in the quality management of natural rubber

latex condoms /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

CONTRACEPTIVE SHEATHS ISO ISO 16038 2005 Rubber condoms - Guidance on the use of ISO 4074 in the quality management of natural rubber

latex condoms /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

CONVEYOR BELTS ASME ASME B20.1 2006 Safety standard for conveyors and related equipment /By American Society of Mechanical

Engineers (ASME) and American National Standards Institute (ANSI). New York: ASME, 2006.


COPPER ISO

ISO 12744 2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of sampling /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 13292 2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the bias of sampling /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

SAA

AS 2738 2000 Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings /By Standards Australia (SAA). New South Wales: SAA, 2000.

AS 2863 1999 Copper, lead and zinc sulfide concentrates - Determination of mass loss of bulk material on drying /By Standards Australia (SAA). New South Wales: SAA, 1999.

COPPER ALLOYS SAA

AS 2738 2000 Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings /By Standards Australia (SAA). New South Wales: SAA, 2000.

CORROSION ISO ISO 17081 2004 Method of measurement of hydrogen permeation and determination of hydrogen uptake and

transport in metals by an electrochemical technique /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

CORROSION PROTECTION ISO ISO 12473 2006 General principles of cathodic protection in sea water /By International Organization for

Standardization (ISO). Geneva: ISO, 2006.

CRANES ISO ISO 12480-3 2005 Cranes - Safe use - P.3: Tower cranes /By International Organization for Standardization (ISO).

Geneva: ISO, 2005.


ISO 12488-1 2005 Cranes - Tolerances for wheels and travel and traversing tracks - P.1: General /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 16881-1 2005 Cranes - Design calculation for rail wheels and associated trolley track supporting structure - P.1: General /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

CROSS-LINKED MATERIALS ISO ISO 10147 2004 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of

crosslinking by determination of the gel content /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

CROSS-LINKING (CHEMICAL) ISO ISO 10147 2004 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of


CROSSLINKED MATERIALS AWWA ANSI/AWWA C903 2005 Polyethylene - Aluminium - Polyethylene & Cross-linked polyethylene - Aluminium -

Cross-linked polyethylene composite pressure pipes, 1/2 in. (12 mm) through 2 in. (50 mm), for water service /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

CYLINDRICAL SHAPE ISO ISO 10889-1 2004 Tool holders with cylindrical shank - P.1: Cylindrical shank, location bore - Technical delivery

conditions /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004. ISO 10889-2 2004 Tool holders with cylindrical shank - P.2: Type A, shanks for tool holders of special designs /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004. ISO 10889-3 2004 Tool holders with cylindrical shank - P.3: Type B with rectangular radial seat /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004. ISO 10889-4 2004 Tool holders with cylindrical shank - P.4: Type C with rectangular axial seat /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.


ISO 10889-6 2004 Tool holders with cylindrical shank - P.6: Type E with cylindrical seat /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

ISO 10889-7 2004 Tool holders with cylindrical shank - P.7: Type F with taper seat /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

DANGEROUS MATERIALS ISO

ISO 16106 2006 Packaging - Transport packages for dangerous goods - Dangerous goods packaging, intermediate bulk containers (IBCs) and large packaging - Guidelines for the application of ISO 9001 /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

SAA AS 2809.4 2001 Road tank vehicles for dangerous goods - P.4: Tankers for toxic and corrosive cargoes /By

Standards Australia (SAA). New South Wales: SAA, 2001. AS 2809.5 2001 Road tank vehicles for dangerous goods - P.5: Tankers for bitumen-based products /By Standards

Australia (SAA). New South Wales: SAA, 2001. AS 2809.6 2001 Road tank vehicles for dangerous goods - P.6: Tankers for cryogenic liquids /By Standards

Australia (SAA). New South Wales: SAA, 2001.

DEFINITIONS ISO ISO 12625-1 2005 Tissue paper and tissue products - P.1: General guidance on terms /By International

Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 13232-1 2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective

devices fitted to motorcycles - P.1: Definitions, symbols and general considerations /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 13232-2 2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - P.2: Definition of impact conditions in relation to accident data /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 17356-1 2005 Road vehicles - Open interface for embedded automotive applications - P.1: General structure and terms, definitions and abbreviated terms /By International Organization for Standardization (ISO). Geneva: ISO, 2005.


SAA

AS 2898.1 2003 Radar speed detection - P.1: Functional requirements and definitions /By Standards Australia (SAA). New South Wales: SAA, 2003.

DENTAL EQUIPMENT ISO

ISO 9680 2007 Dentistry - Operating lights /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO 10650-1 2004 Dentistry - Powered polymerization activators - P.1: Quartz tungsten halogen lamps /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

DENTISTRY ISO

ISO 10650-1 2004 Dentistry - Powered polymerization activators - P.1: Quartz tungsten halogen lamps /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

DESIGN SAA

AS 2665 2001 Smoke/heat venting systems - Design, installation and commissioning /By Standards Australia (SAA). 2nd ed. New South Wales: SAA, 2001.

DIELECTRIC DEVICES CSBTS

GB/T 1693 2007 Rubber, vulcanized - Determination of dielectric constant and dielectric loss tangent /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

DIMENSIONAL MEASUREMENT ISO

ISO/TR 16570 2004 Geometrical Product Specifications (GPS) - Linear and angular dimensioning and tolerancing: +/- limit specifications - Step dimensions, distances, angular sizes and radii /By International Organization for Standardization (ISO). Geneva: ISO, 2004.


DIMENSIONAL TOLERANCES ISO

ISO/TR 16570 2004 Geometrical Product Specifications (GPS) - Linear and angular dimensioning and tolerancing: +/- limit specifications - Step dimensions, distances, angular sizes and radii /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

DISINFECTANTS AWWA ANSI/AWWA C652 2002 Disinfection of water-storage facilities /By American Water Works Association (AWWA)

and American National Standards Institute (ANSI). Denver: AWWA, 2002. ANSI/AWWA C653 2003 Disinfection of water treatment plants /By American Water Works Association (AWWA)

and American National Standards Institute (ANSI). Denver: AWWA, 2003. ANSI/AWWA C654 2003 Disinfection of wells /By American Water Works Association (AWWA) and American

National Standards Institute (ANSI). Denver: AWWA, 2003.

DISPLACEMENT METERS AWWA

ANSI/AWWA C700 2002 Cold-water meters - Displacement type, bronze main case /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.

DISTRIBUTION SYSTEMS AWWA

ANSI/AWWA G200 2004 Distribution systems operation and management /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

DRILLING MACHINES CSBTS GB 3883.6 2007 Safety of hand-held motor-operated electric tools - P.6: Particular requirements for drills and

impact drills /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

ISO ISO 17078-1 2004 Petroleum and natural gas industries - Drilling and production equipment - P.1: Side-pocket

mandrels /By International Organization for Standardization (ISO). Geneva: ISO, 2004.


DRILLING (MINERAL EXTRACTION) ISO

ISO 13500 2006 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 13501 2005 Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

DRYING ISO

ISO 5077 2007 Textiles - Determination of dimensional change in washing and drying /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

EARTH-MOVING EQUIPMENT ISO

ISO 10968 2004 Earth-moving machinery - Operator's controls /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

ISO 12509 2004 Earth-moving machinery - Lighting, signaling and marking lights, and reflex-reflector devices /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

ELASTOMERS ISO

ISO 13226 2005 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ELECTRIC CABLES SAA

AS/NZS 2802 2000 Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) /By Standards Australia (SAA). New South Wales: SAA, 2000.

AS/NZS 2893 2002 Electric cables - Lead and lead alloy sheaths - Composition /By Standards Australia (SAA). New South Wales: SAA, 2002.


ELECTRIC POWER SYSTEM DISTURBANCES ISO ISO 11451-1 2005 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated

electromagnetic energy - P.1: General principles and terminology /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

ISO 11451-2 2005 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - P.2: Off-vehicle radiation sources /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

ISO 11452-1 2005 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - P.1: General principles and terminology /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

ISO 11452-2 2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - P.2: Absorber-lined shielded enclosure /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

ISO 11452-4 2005 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - P.4: Bulk current injection (BCI) /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

ELECTRICAL - EQUIPMENT IHS

GOST Database - GOSE Russian standards /By State Committee of the Russian Federation for Standardization and Metrology (GOST R) and Information Handling Services (IHS). Englewood: IHS, 2007.

ELECTRICAL HOUSEHOLD APPLIANCES SFS

SFS 6000-7-709 2007 Low-voltage electrical installations - P.7-709: Requirements for special installations or locations. Marinas /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-710 2007 Low-voltage electrical installations - P.7-710: Requirements for special installations or locations. Medical locations /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-711 2007 Low-voltage electrical installations - P.7-711: Requirements for special installations or locations. Exhibition, shows and stands /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


SFS 6000-7-712 2007 Low-voltage electrical installations - P.7-712: Requirements for special installations or locations. Solar photovoltaic (PV) power supply systems /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-713 2007 Low-voltage electrical installations - P.7-713: Requirements for special installations or locations. Furniture /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-714 2007 Low-voltage electrical installations - P.7-714: Requirements for special installations or locations. External lighting installations /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-715 2007 Low-voltage electrical installations - P.7-714: Requirements for special installations or locations. Extra-low-voltage lighting installations /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-717 2007 Low-voltage electrical installations - P.7-717: Requirements for special installations or locations - Mobile or transportable units /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-721 2007 Low-voltage electrical installations - P.7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-740 2007 Low-voltage electrical installations - P.7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices an booths at fairgrounds, amusement parks and circuses /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-753 2007 Low-voltage electrical installations - P.7-753: Requirements for special installations or locations - Heating systems /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-8-801 2007 Low-voltage electrical installations - P.8-801: Supplementary requirements for certain installations - Public distribution networks /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-8-802 2007 Low-voltage electrical installations - P.8-802: Supplementary requirements for certain installations - Repair, alteration and extension of electrical installations /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-8-803 2007 Low-voltage electrical installations - P.8-803: Supplementary requirements for certain installations - Electrical repair shops and laboratories /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-8-804 2007 Low-voltage electrical installations - P.8-804: Supplementary requirements for certain installations - Dry, humid and wet locations, outdoor locations /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-8-810 2007 Low-voltage electrical installations - P.8-810: Supplementary requirements for certain installations - Switchgear assemblies /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-8-812 2007 Low-voltage electrical installations - P.8-812: Supplementary requirements for certain special installations - Installation and use of installation couplers intended for permanent connection /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


SFS 6000-8-813 2007 Low-voltage electrical installations - P.8-813: Supplementary requirements for certain special installations - Selection and erection of plugs and socket outlets /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


ELECTRICAL INSTALLATIONS SAA

AS/NZS 3001 2001 Electrical installations - Relocatable premises (including caravans and tents) and their site installations /By Standards Australia (SAA). New South Wales: SAA, 2001.

SFS

SFS 6000-6 2007 Low-voltage electrical installations - P.6: Verification /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-701 2007 Low-voltage electrical installations - P.7-701: Requirement for special installations or locations. Locations containing a bath or shower /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-702 2007 Low-voltage electrical installations - P.7-702: Requirements for special installations or locations. Swimming pools and other basins /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-703 2007 Low-voltage electrical installations - P.7-703: Requirements for special installations or locations. Rooms and cabins containing sauna heaters /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-704 2007 Low-voltage electrical installations - P.7-704: Requirements for special installations or locations. Construction and demolation site installations /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-705 2007 Low-voltage electrical installations - P.7-705: Requirements for special installations or locations. Agricultural and horticultural premises /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-706 2007 Low-voltage electrical installations - P.7-70: Requirements for special installations or locations. Conducting locations with retricted movement /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-708 2007 Low-voltage electrical installations - P.7-708: Requirements for special installations or locations. Requirements for special installation or locations, Caravan parks /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.
















ELECTRICAL INSULATION SFS


ELECTRICAL INSULATION DEVICES UL UL 94 2006 Tests for flammability of plastic materials for parts in devices and appliances /By Underwriters

Laboratories Inc. (UL). Northbrook: UL, 2006.

ELECTRICAL SAFETY IEEE IEEE C2 2007 National Electrical Safety Code /By Institute of Electrical and Electronics Engineers (IEEE). New

York: IEEE, 2007.

SFS SFS 6000-7-753 2007 Low-voltage electrical installations - P.7-753: Requirements for special installations or

locations - Heating systems /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

ELECTRICAL – SAFETY CODES IEEE IEEE C2 2007 National Electrical Safety Code /By Institute of Electrical and Electronics Engineers (IEEE). New

York: IEEE, 2007.

ELECTROLYTIC CAPACITORS - ALUMINIUM CSBTS GB/T 3615 2007 Aluminium foil for electrolytic capacitor /By China State Bureau of Quality and Technical


ELECTROMAGNETIC RADIATION ISO ISO 11451-1 2005 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated







ELECTRONIC EQUIPMENT AND COMPONENTS CSBTS GB/T 2900.28 2007 Electrotechnical terminology - Electric tool /By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2007. GB/T 3047.6 2007 Series of basic dimensions of cases for electronic equipment /By China State Bureau of Quality

and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

ELECTRONICS - DICTIONARIES CSBTS GB/T 2900.28 2007 Electrotechnical terminology - Electric tool /By China State Bureau of Quality and Technical


ELEVATORS (CONVEYORS) ASME ASME A17.2 2004 Guide for inspection of elevators, escalators, and moving walks /By American Society of

Mechanical Engineers (ASME) and American National Standards Institute (ANSI). New York: ASME, 2004.

ENGINEERING IHS CGSB Database /By Canadian General Standards Board (CGSB). Englewood: Information Handling Services, 2006.


ENGINEERING DRAWINGS ASME

ASME Y14.100 2004 Engineering drawing practices /By American Society of Mechanical Engineers (ASME) and American National Standards Institute (ANSI). New York: ASME, 2004.

ASME Y14.24 1999 (2004) Types and applications of engineering drawings /By American Society of Mechanical Engineers (ASME) and American National Standards Institute (ANSI). New York: ASME, 1999.

ASME Y14.35M 1997 Revision of engineering drawings and associated documents /By American Society of Mechanical Engineers (ASME) and American National Standards Institute (ANSI). New York: ASME, 1997.

ENVIRONMENTAL ENGINEERING ISO

ISO 14001 2007 ISO 14001 The world's environmental management standard /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

IHS

DIN English Database /By Deutsches InstitÜt für Normung (DIN) and Information Handling Services (IHS). Englewood: IHS, 2007.

ENVIRONMENTAL MANAGEMENT ISO ISO 14001 2007 ISO 14001 The world's environmental management standard /By International Organization for

Standardization (ISO). Geneva: ISO, 2007.

ERGONOMICS ISO ISO 13732-3 2005 Ergonomics of the thermal environment - Methods for the assessment of human responses to

contact with surfaces - P.3: Cold surfaces /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ESCALATORS - SAFETY REQUIREMENTS ASME

ASME A17.2 2004 Guide for inspection of elevators, escalators, and moving walks /By American Society of Mechanical Engineers (ASME) and American National Standards Institute (ANSI). New York: ASME, 2004.


EXPANSION JOINTS AWWA

ANSI/AWWA C221 2001 Fabricated steel mechanical slip-type expansion joints /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2001.

EXTRACTION METHODS OF ANALYSIS ISO ISO 10147 2004 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of


SAA AS 2678.1 1999 Zinc sulfide concentrates - Chemical analysis - P.1: Determination of zinc content - Solvent

extraction and EDTA titrimetric method /By Standards Australia (SAA). New South Wales: SAA, 1999.

EYEBOLTS SFS SFS 2654 2007 Overhead line accessories, Rock eyebolts KS /By Finnish Standards Association (SFS). Helsinki:

SFS, 2007.

FABRIC TESTING ISO ISO 3759 2007 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for

determination of dimensional change /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007.

FANS ISO ISO 13348 2006 Industrial fans - Tolerances, methods of conversion and technical data presentation /By

International Organization for Standardization (ISO). Geneva: ISO, 2006.

FASTENERS SFS SFS 2651 2007 Overhead line accessories, Fasteners HKK and stay clamps HLK for stay rope /By Finnish



FIRE ALARMS NFPA


UL

UL 864 2006 Control units and accessories for fire alarm systems /By Underwriters Laboratories Inc. (UL). Northbrook: UL, 2006.

FIRE PROTECTION NFPA

NFPA 13 2007 Standard for the installation of sprinkler systems /By National Fire Protection Association (NFPA). Quincy: NFPA, 2007.

NFPA 30 2003 Flammable and combustible liquids code /By National Fire Protection Association (NFPA). Quincy: NFPA, 2003.


NFPA 79 2007 Electrical standard for industrial machinery /By National Fire Protection Association (NFPA). Quincy: NFPA: 2007.

NFPA 101 2006 Life safety code /By National Fire Protection Association (NFPA). Quincy: NFPA, 2006.

FIRE SAFETY ISO

ISO/TR 12471 2004 Computational structural fire design - Review of calculation models, fire tests for determining input material data and needs for further development /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

NFPA


FIRE - SAFETY CODES NFPA



FIRE SAFETY IN BUILDINGS - CODES NFPA


FIRE TESTS ISO

ISO/TR 12471 2004 Computational structural fire design - Review of calculation models, fire tests for determining input material data and needs for further development /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

FITTINGS ASME

ASME A112.18.1M 1996 Plumbing fixture fittings /By American Society of Mechanical Engineers (ASME). New York: ASME, 1996.

ASME B16.11 2005 Forged fittings, socket-welding and threaded /By American Society of Mechanical Engineers (ASME) and American National Standards Institute (ANSI). New York: ASME, 2005.

AWWA

ANSI/AWWA C800 2005 Underground service line valves and fittings /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

FITTINGS - PIPES AWWA ANSI/AWWA C226 2006 Stainless-steel fittings for waterworks service, size 1/2 in. through 72 in. (13 mm through

1,800 mm) /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2006.

FIXTURES ASME

ASME A112.18.1M 1996 Plumbing fixture fittings /By American Society of Mechanical Engineers (ASME). New York: ASME, 1996.


FLAMMABLE MATERIALS NFPA

NFPA 30 2003 Flammable and combustible liquids code /By National Fire Protection Association (NFPA). Quincy: NFPA, 2003.

SAA

AS 2809.2 1999 Road tank vehicles for dangerous goods - P.2: Tankers for flammable liquids /By Standards Australia (SAA). New South Wales: SAA, 1999.

UL UL 94 2006 Tests for flammability of plastic materials for parts in devices and appliances /By Underwriters

Laboratories Inc. (UL). Northbrook: UL, 2006.

FLEXIBLE PIPES SAA AS 2683 2000 Hose and hose assemblies for distribution of petroleum and petroleum products (excepting LPG) /By

Standards Australia (SAA). New South Wales: SAA, 2000.

FLOW MEASUREMENT AWWA ANSI/AWWA C750 2003 Transit-time flowmeters in full closed conduits /By American Water Works Association

(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2003.

FLOWMETERS AWWA ANSI/AWWA C750 2003 Transit-time flowmeters in full closed conduits /By American Water Works Association


FLUES SFS SFS 7009 2007 Clay/ceramic flue components - Requirements and test method /By Finnish Standards Association

(SFS). Helsinki: SFS, 2007. SFS 7012 2007 Required properties and levels for different applications of concrete flue elements /By Finnish



SFS 7013 2007 Requirer properties and levels for different applications of concrete flue blocks /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

FLUID PRESSURE SAA

AS 2872 2000 Atmospheric heating of vessels containing fluids - Estimation of maximum temperature /By Standards Australia (SAA). New South Wales: SAA, 2000.

FLY ASH ISO

ISO 11724 2004 Solid mineral fuels - Determination of total fluorine in coal, coke and fly ash /By International Organization for Standardization (ISO) and International Organization for Standardization (ISO). Geneva: ISO, 2004.

FOOD PRODUCTS ISO ISO 17239 2004 Fruits, vegetables and derived products - Determination of arsenic content - Method using hydride

generation atomic absorption spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 17240 2004 Fruit and vegetable products - Determination of tin content - Method using flame atomic

absorption spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 17932 2005 Animal and vegetable fats and oils - Determination of the deterioration of bleachability index

(DOBI) /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

FOOTWEAR ISO ISO 17693 2004 Footwear - Test methods for uppers - Resistance to damage on lasting /By International

Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 17695 2004 Footwear - Test methods for uppers - Deformability /By International Organization for

Standardization (ISO). Geneva: ISO, 2004. ISO 17696 2004 Footwear - Test methods for uppers, linings and insocks - Tear strength /By International

Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 17700 2004 Footwear - Test methods for uppers, linings and insocks - Colour fastness to rubbing /By



ISO 17704 2004 Footwear - Test methods for uppers, linings and insocks - Abrasion resistance /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ISO 17707 2005 Footwear - Test methods for outsoles - Flex resistance /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

FORESTRY EQUIPMENT ISO

ISO 13772 2004 Forestry machinery - Portable chain-saws - Non-manually actuated chain brake performance /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

FORGINGS ASME


FRUITS ISO

ISO 17239 2004 Fruits, vegetables and derived products - Determination of arsenic content - Method using hydride generation atomic absorption spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ISO 17240 2004 Fruit and vegetable products - Determination of tin content - Method using flame atomic absorption spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

FUEL SYSTEMS - VEHICLES SAA

AS/NZS 2739 2003 Natural gas (CNG) fuel systems for vehicle engines /By Standards Australia (SAA). New South Wales: SAA, 2003.

FURNITURE IHS

CGSB Database /By Canadian General Standards Board (CGSB) and Information Handling Services (IHS). Englewood: IHS, 2006.


GAS CYLINDERS ISO

ISO 11755 2005 Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

GEOSYNTHETICS ISO

ISO 12957-1 2005 Geosynthetics - Determination of friction characteristics - P.1: Direct shear test /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 12957-2 2005 Geosynthetics - Determination of friction characteristics - P.2: Inclined plane test /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

GEOTEXTILES ISO ISO 12957-1 2005 Geosynthetics - Determination of friction characteristics - P.1: Direct shear test /By International

Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 12957-2 2005 Geosynthetics - Determination of friction characteristics - P.2: Inclined plane test /By


GRINDING MACHINES CSBTS GB 3883.3 2007 Safety of hand-held motor-operated electric tools - P.2: Particular requirements for grinders,

polishers and disk-type sanders /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

HAND-HELD TOOLS CSBTS GB 3883.3 2007 Safety of hand-held motor-operated electric tools - P.2: Particular requirements for grinders,

polishers and disk-type sanders /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB 3883.5 2007 Safety of hand-held motor-operated electric tools - P.5: Particular requirements for circular saws /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.


GB 3883.6 2007 Safety of hand-held motor-operated electric tools - P.6: Particular requirements for drills and impact drills /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB 3883.10 2007 Safety of hand-held motor-operated electric tools - P.10: Particular requirements for planers /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB 3883.12 2007 Safety of hand-held motor-operated electric tools - P.12: Particular requirements for concrete vibrators /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB 3883.14 2007 Safety of hand-held motor-operated electric tools - P.14: Particular requirements for chain saws /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB 3883.15 2007 Safety of hand-held motor-operated electric tools - P.15: Particular requirements for hedge trimmers /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

HEALTH AND SAFETY REQUIREMENTS SAA

AS/NZS 2865 2001 Safe working in a confined space /By Standards Australia (SAA). New South Wales: SAA, 2001.

HEALTH SERVICES ISO

ISO 17432 2004 Health informatics - Messages and communication - Web access to DICOM persistent objects /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ISO/TR 17119 2005 Health informatics - Health informatics profiling framework /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

HEAT EXCHANGERS CSBTS

GB/T 3625 2007 Titanium and titanium alloy tube for condensers and heat exchangers /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

SAA

AS/NZS 2712 2002 Solar and heat pump water heaters - Design and construction /By Standards Australia (SAA). New South Wales: SAA, 2002.


HEAT-RESISTANCE MATERIALS CSBTS

GB/T 1221 2007 Heat-resistant steel bars /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

ISO

ISO 188 2007 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007.

HEATING EQUIPMENT SFS


HEDGE TRIMMERS CSBTS


HOT ROLLED PRODUCTS CSBTS

GB 2585 2007 Hot-rolled steel rails for railway /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

ISO

ISO 4996 2007 Hot-rolled steel sheet of high yield stress structural quality /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007.

HOT-ROLLED STEELS CSBTS



ISO

ISO 4996 2007 Hot-rolled steel sheet of high yield stress structural quality /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007.

HUMAN BODY - VIBRATION MEASUREMENT SAA

AS 2670.1 2001 Evaluation of human exposure to whole-body vibration - P.1: General requirements /By Standards Australia (SAA). New South Wales: SAA, 2001.

AS 2670.4 2001 Evaluation of human exposure to whole-body vibration - P.4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems /By Standards Australia (SAA). New South Wales: SAA, 2001.

HYDRAULICALLY-OPERATED DEVICES - JACKS SAA

AS/NZS 2615 2004 Hydraulic trolley jacks /By Standards Australia (SAA). 6th ed. New South Wales: SAA, 2004.

HYGIENE ISO

ISO 17665-1 2006 Sterilization of health care products - Moist heat - P.1: Requirements for the development, validation and routine control of a sterilization process for medical devices /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

IDENTITY CARDS ISO

ISO/IEC 10373-1 2006 Identification cards - Test methods - P.1: General characteristics /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO/IEC 10373-2 2006 Identification cards - Test methods - P.2: Cards with magnetic stripes /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO/IEC 10373-5 2006 Identification cards - Test methods - P.5: Optical memory cards /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.


IDENTITY CARDS - MAGNETIC STRIPES ISO


IDENTITY CARDS - TESTING ISO

ISO/IEC 10373-1 2006 Identification cards - Test methods - P.1: General characteristics /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.


ISO/IEC 10373-5 2006 Identification cards - Test methods - P.5: Optical memory cards /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

IMPACT TESTING ISO

ISO 13232-3 2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - P.3: Motorcyclist anthropometric impact dummy /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 13232-6 2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - P.6: Full-scale impact-test procedures /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 13232-7 2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - P.7: Standardized procedures for performing computer simulations of motorcycle impact tests /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

INDUSTRIAL AIR POLLUTANTS IHS

DIN English Database /By Deutsches Institut für Normung (DIN) and Information Handling Services (IHS). Englewood: IHS, 2007.


INDUSTRIAL ENGINEERING IHS

DIN English Database /By Deutsches Institut für Normung (DIN) and Information Handling Services (IHS). Englewood: IHS, 2007.

INDUSTRIAL MACHINES NFPA


INFORMATION ISO ISO/TR 17119 2005 Health informatics - Health informatics profiling framework /By International Organization for

Standardization (ISO). Geneva: ISO, 2005. ISO 17432 2004 Health informatics - Messages and communication - Web access to DICOM persistent objects /By


SAA AS 2811 2003 Personal emergency medical information devices /By Standards Australia (SAA). New South

Wales: SAA, 2003.

INSULATED CABLES SFS SFS 3157 2007 Telecommunication cables, PE-insulated and PE-sheathed drop wires MU 1 x 4 x 0,8 and MHBU 1

x 4 x 0,8 /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5012 2007 Telecommunication cables, foam PE-insulated an PE-sheathed filled underground and duct pair

cable VMOHBU-TL /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5013 2007 Telecommunication cables, Foam PE-insulated and PE-sheathed filled armoured underground and

underwater pair cable VMOPU /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5740 2007 Telecommunication cables, foam PE-insulated an PE-sheathed filled aerial cable VMOHBUK-TL

/By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5741 2007 Telecommunication cables, Foam PE-insulated and PE-sheathed unfilled duct pair cable VMHBU-

TL /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


INTERNATIONAL IDENTIFICATION NUMBERS ISO ISO 3297 2007 Information and documentation - International standard serial number (ISSN) /By International

Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007.

INTERNATIONAL STANDARD SERIAL NUMBERING ISO ISO 3297 2007 Information and documentation - International standard serial number (ISSN) /By International

Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007.

IONIZING RADIATION ISO ISO 11929-5 2005 Determination of the detection limit and decision threshold for ionizing radiation measurements

- P.5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 11929-6 2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - P.6: Fundamentals and applications to measurements by use of transient mode /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 11929-7 2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - P.7: Fundamentals and general applications /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 11929-8 2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - P.8: Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

IRON ISO ISO 17053 2005 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas /By


IRON - ATOMIC ABSORPTION SPECTROPHOTOMETRY CSBTS

GB/T 223.40 2007 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.


LABORATORIES - CALIBRATION

NSCL International

ANSI/NCSL Z540.1 1994 (R2002) American National Standard for Calibration - Calibration laboratories and measuring and test equipment - General requirements /By NSCL International and American National Standards Institute (ANSI). Boulder: NSCL International, 2002.

LEAD

ISO



LEATHER ISO

ISO 17070 2006 Leather - Chemical tests - Determination of pentachlorophenol content /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 17076 2006 Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

LIFE SAFETY NFPA


LIFT - SAFETY MEASURES

ASME

ASME A17.2 2004 Guide for inspection of elevators, escalators, and moving walks /By American Society of Mechanical Engineers (ASME) and American National Standards Institute (ANSI). New York: ASME, 2004.


LIFTING SAA

AS 2740 2001 Wedge-type sockets /By Standards Australia (SAA). New South Wales: SAA, 2001.

LIGHTING EQUIPMENT ISO

ISO 8995-3 2006 Lighting of work places - P.3: Lighting requirements for safety and security of outdoor work places /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

LIGHTING SYSTEMS ISO

ISO 8995-3 2006 Lighting of work places - P.3: Lighting requirements for safety and security of outdoor work places /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

LIQUEFIED PETROLEUM GAS - VEHICLES SAA

AS 2746 1999 Working areas for gas-fuelled vehicles /By Standards Australia (SAA). New South Wales: SAA, 1999.

LOW-VOLTAGE EQUIPMENT SFS SFS 6000-6 2007 Low-voltage electrical installations - P.6: Verification /By Finnish Standards Association (SFS).

Helsinki: SFS, 2007. SFS 6000-7-702 2007 Low-voltage electrical installations - P.7-702: Requirements for special installations or

locations. Swimming pools and other basins /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 6000-7-703 2007 Low-voltage electrical installations - P.7-703: Requirements for special installations or

locations. Rooms and cabins containing sauna heaters /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 6000-7-704 2007 Low-voltage electrical installations - P.7-704: Requirements for special installations or

locations. Construction and demolation site installations /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 6000-7-705 2007 Low-voltage electrical installations - P.7-705: Requirements for special installations or

locations. Agricultural and horticultural premises /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 6000-7-706 2007 Low-voltage electrical installations - P.7-70: Requirements for special installations or

locations. Conducting locations with retricted movement /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


SFS 6000-7-708 2007 Low-voltage electrical installations - P.7-708: Requirements for special installations or locations. Requirements for special installation or locations, Caravan parks /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


SFS 6000-7-711 2007 Low-voltage electrical installations - P.7-711: Requirements for special installations or locations. Exhibition, shows and stands /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


















LOW-VOLTAGE INSTALLATIONS

SFS

SFS 6000-7-701 2007 Low-voltage electrical installations - P.7-701: Requirement for special installations or locations. Locations containing a bath or shower /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 6000-7-710 2007 Low-voltage electrical installations - P.7-710: Requirements for special installations or locations. Medical locations /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.




LUBRICATING OILS - FILTRATION ISO

ISO 13357-2 2005 Petroleum products - Determination of the filterability of lubricating oils - P.2: Procedure for dry oils /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

MACHINE TOOLS CSBTS

GB 3883.3 2007 Safety of hand-held motor-operated electric tools - P.2: Particular requirements for grinders, polishers and disk-type sanders /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.


GB 3883.6 2007 Safety of hand-held motor-operated electric tools - P.6: Particular requirements for drills and impact drills /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB 3883.10 2007 Safety of hand-held motor-operated electric tools - P.10: Particular requirements for planers /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB 3883.12 2007 Safety of hand-held motor-operated electric tools - P.12: Particular requirements for concrete vibrators /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB 3883.14 2007 Safety of hand-held motor-operated electric tools - P.14: Particular requirements for chain saws /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.


MANAGEMENT TECHNIQUES ISO

ISO 14001 2007 ISO 14001 The world's environmental management standard /By International Organization for Standardization (ISO). Geneva: ISO, 2007.


MANDRELS ISO

ISO 17078-1 2004 Petroleum and natural gas industries - Drilling and production equipment - P.1: Side-pocket mandrels /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

MANUFACTURING IHS

CGSB Database/By Canadian General Standards Board (CGSB) and Information Handling Services (IHS). Englewood: IHS, 2006.

MARINE NAVIGATION ISO

ISO 17884 2004 Ships and marine technology - Searchlights for high-speed craft /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

MARKING CSBTS GB/T 3199 2007 Wrought aluminium and aluminium alloy products - Packing, marking, transporting and storing

/By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007. ISO

ISO 3759 2007 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007.

MECHANICAL ENGINEERING IHS DIN English Database /By Deutsches Institut für Normung (DIN) and Information Handling Services (IHS).

Englewood: IHS, 2007.

MECHANICAL SHOCK SAA AS 2775 2004 Mechanical vibration and shock - Mechanical mounting of accelerometers /By Standards Australia

(SAA). New South Wales: SAA, 2004.


MEDICAL EQUIPMENT ISO

ISO 10993-2 2006 Biological evaluation of medical devices - P.2: Animal welfare requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 10993-6 2007 Biological evaluation of medical devices - P.6: Tests for local effects after implantation /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO/TS 10993-19 2006 Biological evaluation of medical devices - P.19: Physico-chemical, morphological and topographical characterization of materials /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO/TS 10993-20 2006 Biological evaluation of medical devices - P.20: Principles and methods for immunotoxicology testing of medical devices /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

SAA

AS 2811 2003 Personal emergency medical information devices /By Standards Australia (SAA). New South Wales: SAA, 2003.

METALS ISO



SAE International

SAE HS 1086 2004 Metals & alloys in the Unified Numbering System /By Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM). 10th ed. Warrendale: SAE International, 2004.

MICROWAVE OVENS SAA

AS/NZS 2895.1 2004 Performance of household electrical appliances - Microwave ovens - P.1: Methods for measuring the performance of microwave ovens for household and similar purposes /By Standards Australia (SAA). New South Wales: SAA, 2004.


MILK ISO

ISO 13366-2 2006 Milk - Enumeration of somatic cells - P.2: Guidance on the operation of fluoro-opto-electronic counters /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

MINERAL RESOURCES IHS

GOST - GOSE Russian standards Database /By State Committee of the Russian Federation for Standardization and Metrology (GOST R) and Information Handling Services (IHS). Englewood: IHS, 2006.

MINING IHS


MOLYBDENUM INORGANIC COMPOUNDS CSBTS

GB/T 3462 2007 Bars and plate blanks of molybdenum /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

NATURAL GAS ISO


NICKEL ISO




NICKEL ALLOYS CSBTS

GB/T 2072 2007 Nickel and nickel alloy strips /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

NON-DESTRUCTIVE TESTING SAA

AS 2824 2003 Non-destructive testing - Ultrasonic methods - Evaluation and quality classification of metal bearing bonds /By Standards Australia (SAA). New South Wales: SAA, 2003.

OPTICAL INSTRUMENTS ISO

ISO 11810-1 2005 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - P.1: Primary ignition and penetration /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 17123-5 2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - P.5: Electronic tacheometers /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 17123-7 2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - P.7: Optical plumbing instruments /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

OPTICS ISO

ISO 11810-1 2005 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - P.1: Primary ignition and penetration /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ORDERS (SALES DOCUMENTS) SAA

AS/NZS 2807 2000 Reporting outstanding orders (in the book trade) /By Standards Australia (SAA). New South Wales: SAA, 2000.


OSCILLATORS AWWA ANSI/AWWA C713 2005 Cold-water meters - Fluidic-oscillator type /By American Water Works Association


OVERHEAD LINE CONDUCTORS SFS SFS 2648 2007 Overhead line accessories, blocks for stays HL /By Finnish Standards Association (SFS). Helsinki:

SFS, 2007. SFS 2650 2007 Overhead line accessories, Stay tighteners, fasteners and irons /By Finnish Standards Association

(SFS). Helsinki: SFS, 2007. SFS 2660 2007 Overhead line accessories, blade towel TT 20 /By Finnish Standards Association (SFS). Helsinki:

SFS, 2007.

OVERHEAD POWER LINES SFS SFS 2648 2007 Overhead line accessories, blocks for stays HL /By Finnish Standards Association (SFS). Helsinki:

SFS, 2007. SFS 2650 2007 Overhead line accessories, Stay tighteners, fasteners and irons /By Finnish Standards Association

(SFS). Helsinki: SFS, 2007. SFS 2651 2007 Overhead line accessories, Fasteners HKK and stay clamps HLK for stay rope /By Finnish

Standards Association (SFS). Helsinki: SFS, 2007. SFS 2654 2007 Overhead line accessories, Rock eyebolts KS /By Finnish Standards Association (SFS). Helsinki:

SFS, 2007. SFS 2658 2007 Overhead line accessories, Braces for rockpole KVT /By Finnish Standards Association (SFS).

Helsinki: SFS, 2007. SFS 2659 2007 Overhead line accessories, Rockscrew KR /By Finnish Standards Association (SFS). Helsinki:

SFS, 2007. SFS 2660 2007 Overhead line accessories, blade towel TT 20 /By Finnish Standards Association (SFS). Helsinki:

SFS, 2007. SFS 4385 2007 Overhead line accessories, Cross-arm pin OT 24 /By Finnish Standards Association (SFS).

Helsinki: SFS, 2007.


SFS 5234 2007 Overhead line accessories, Eye staylinks JT /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

PACKAGING ISO

ISO 16106 2006 Packaging - Transport packages for dangerous goods - Dangerous goods packaging, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

SAA

AS 2852 2004 Packaging - Pictorial marking for the handling of packages /By Standards Australia (SAA). New South Wales: SAA, 2004.

PACKING CSBTS

GB/T 3199 2007 Wrought aluminium and aluminium alloy products - Packing, marking, transporting and storing /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

PERFORMANCE TESTING SAA

AS/NZS 2895.1 2004 Performance of household electrical appliances - Microwave ovens - P.1: Methods for measuring the performance of microwave ovens for household and similar purposes /By Standards Australia (SAA). New South Wales: SAA, 2004.

PERSONAL PROTECTIVE EQUIPMENT ISO

ISO 16024 2005 Personal protective equipment for protection against falls from a height - Flexible horizontal lifeline systems /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

PETROLEUM ISO



ISO 13501 2005 Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 13503-3 2005 Petroleum and natural gas industries - Completion fluids and materials P.3: Testing of heavy brines /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 13628-7 2005 Petroleum and natural gas industries - Design and operation of subsea production systems - P.7: Completion/workover riser systems /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 13628-10 2005 Petroleum and natural gas industries - Design and operation of subsea production systems - P.10: Specification for bonded flexible pipe /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 17078-1 2004 Petroleum and natural gas industries - Drilling and production equipment - P.1: Side-pocket mandrels /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

PETROLEUM PRODUCTS IHS


ISO

ISO 13357-2 2005 Petroleum products - Determination of the filterability of lubricating oils - P.2: Procedure for dry oils /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

PIN INSULATORS SFS

SFS 4385 2007 Overhead line accessories, Cross-arm pin OT 24 /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

PIPE COATINGS - STEELS AWWA

ANSI/AWWA C224 2001 Two-layer nylon-11-based polyamide coating system for the interior and exterior of steel water pipe, connections, fittings, and special sections /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2001.


PIPE CONNECTIONS SFS



PIPE FITTINGS ISO

ISO 4427-2 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - P.2: Pipes /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO 4427-5 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - P.5: Fitness for purpose of the system /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

PIPE FITTINGS - COATINGS AWWA ANSI/AWWA C222 1999 Polyurethane coatings for the interior and exterior of steel water pipe and fittings /By

American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 1999.

PIPELINES AWWA ANSI/AWWA C225 2003 Fused polyolefin coating systems for the exterior of steel water pipelines /By American

Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2003.

PIPES ISO ISO 4427-2 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - P.2: Pipes /By


SAA

AS 2698.2 2000 Plastics pipes and fittings for irrigation and rural applications - P.2: Polyethylene rural pipe /By Standards Australia (SAA). New South Wales: SAA, 2000.


SFS


PIPEWORK SYSTEMS ISO


ISO 4427-3 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - P.3: Fittings /By International Organization for Standardization (ISO). Geneva: ISO, 2007.


PIPING ASME ASME B31.1 2004 Power piping /By American Society of Mechanical Engineers (ASME) and American National

Standards Institute (ANSI). New York: ASME, 2004. ASME B31.3 2004 Process piping /By American Society of Mechanical Engineers (ASME) and American National

Standards Institute (ANSI). New York: ASME, 2004. ISO ISO 4427-1 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - P.1: General /By


PLANTS AWWA ANSI/AWWA G100 2005 Water treatment plant operation and management /By American Water Works

Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

PLASTIC PIPES ISO ISO 4427-1 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - P.1: General /By




PLASTICS ISO

ISO 16790 2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

PLASTICS HOSES ISO

ISO 7326 2006 Rubber and plastics hoses - Assessment of ozone resistance under static conditions /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.

PLATES CSBTS GB/T 3280 2007 Cold rolled stainless steel plate, sheet and strip /By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2007. GB/T 3462 2007 Bars and plate blanks of molybdenum /By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2007. GB/T 3621 2007 Titanium and titanium alloy plate and sheet /By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2007. GB/T 4237 2007 Hot rolled stainless steel plate, sheet and strip /By China State Bureau of Quality and Technical


POLYETHYLENE - PIPES AWWA ANSI/AWWA C903 2005 Polyethylene - Aluminium - Polyethylene & Cross-linked polyethylene - Aluminium -

Cross-linked polyethylene composite pressure pipes, ½ in. (12 mm) through 2 in. (50 mm), for water service /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ISO

ISO 4427-1 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - P.1: General /By International Organization for Standardization (ISO). Geneva: ISO, 2007.





POLYVINYL CHLORIDE - PIPES AWWA

ANSI/AWWA C907 2004 Injection-molded polyvinyl chloride (PVC) pressure fittings, 4 in. through 12 in. (100 mm through 300 mm), for water distribution /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

POTABLE WATER AWWA

ANSI/AWWA D130 2002 Flexible-membrane materials for potable water applications /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.

POWERED DEVICES UL

UL 864 2006 Control units and accessories for fire alarm systems /By Underwriters Laboratories Inc. (UL). Northbrook: UL, 2006.

PRECISION ISO


PREFERRED NUMBERS SAA

AS 2752 2003 Preferred numbers and their use /By Standards Australia (SAA). New South Wales: SAA, 2003.


PRESSURE PIPES AWWA

ANSI/AWWA C300 2004 Reinforced concrete pressure pipe, steel-cylinder type /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

ANSI/AWWA C302 2004 Reinforced concrete pressure pipe, Noncylinder type /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

ANSI/AWWA C402 2005 Asbestos - cement transmission pipe, 18 in. through 42 in. (450 mm through 1,050 mm) for water supply service /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA C403 2005 The selection of asbestos-cement transmission pipe, sizes 18 in. through 42 in. (450 mm through 1,050 mm), for water supply service /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA C903 2005 Polyethylene - Aluminium - Polyethylene & Cross-linked polyethylene - Aluminium - Cross-linked polyethylene composite pressure pipes, ½ in. (12 mm) through 2 in. (50 mm), for water service /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA C907 2004 Injection-molded polyvinyl chloride (PVC) pressure fittings, 4 in. through 12 in. (100 mm through 300 mm), for water distribution /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

PRESTRESSED CONCRETE AWWA ANSI/AWWA D110 2004 Wire-and strand- wound, circular, prestressed concrete water tanks /By American Water

Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004. ANSI/AWWA D115 2006 Tendon-prestressed concrete water tanks /By American Water Works Association


PROTECTIVE CLOTHING SAA

AS/NZS 4824 2006 Protective clothing for firefighters - Requirements and test methods for protective clothing used for wildland firefighting /By Standards Australia (SAA). New South Wales: SAA, 2006.


PULLEYS CSBTS

GB/T 2778 2007 Power take-off pulley for agricultural tractors - Peripheral speed and width /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

QUANTITY ISO

ISO 80000-3 2006 Quantities and units - P.3: Space and time /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 80000-4 2006 Quantities and units - P.4: Mechanics /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

RADAR SAA

AS 2898.1 2003 Radar speed detection - P.1: Functional requirements and definitions /By Standards Australia (SAA). New South Wales: SAA, 2003.

AS 2898.2 2003 Radar speed detection - P.2: Operational procedures /By Standards Australia (SAA). New South Wales: SAA, 2003.

RADAR EQUIPMENT SAA AS 2898.1 2003 Radar speed detection - P.1: Functional requirements and definitions /By Standards Australia

(SAA). New South Wales: SAA, 2003. AS 2898.2 2003 Radar speed detection - P.2: Operational procedures /By Standards Australia (SAA). New South

Wales: SAA, 2003.

RADIATION MEASUREMENT ISO

ISO 11929-5 2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - P.5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material /By International Organization for Standardization (ISO). Geneva: ISO, 2005.


RAILROAD EQUIPMENT CSBTS


RAILS CSBTS


RAILWAY ENGINEERING CSBTS


REFRACTORIES ISO

ISO 12680-1 2005 Methods of test for refractory products - P.1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

REINFORCED CONCRETE AWWA

ANSI/AWWA C300 2004 Reinforced concrete pressure pipe, steel-cylinder type /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

ANSI/AWWA C302 2004 Reinforced concrete pressure pipe, Noncylinder type /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

REINFORCED MATERIALS SFS



REINFORCED PLASTICS AWWA ANSI/AWWA D120 2002 Thermosetting fiberglass - Reinforced plastic tanks /By American Water Works

Association (AWWA). Denver: AWWA, 2002. ANSI/AWWA F101 2002 Contact-molded, fiberglass-reinforced plastic wash water troughs and launders /By American

Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002. ANSI/AWWA F102 2002 Matched-die-molded, fiberglass-reinforced plastic weir plates, scum baffles and mounting

brackets /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.

SFS SFS 5400 2007 Pipe supporting. Pipe clamps DN 15...500 for FRP pipes standardized according to inside diameter

and for FRP reinforced thermoplastics pipes /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5401 2007 Pipe supporting. Pipe clamps DN 600...1200 for FRP pipes standardized according to inside

diameter and for FRP reinforced thermoplastics pipes /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5885 2007 Pipe supporting. Pipe clamps DN 15...150 for FRP pipes standardized according to inside diameter

and for FRP reinforced thermoplastics pipes /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

REMOTE CONTROL SYSTEMS UL UL 864 2006 Control units and accessories for fire alarm systems /By Underwriters Laboratories Inc. (UL).

Northbrook: UL, 2006.

RESCUE EQUIPMENT ISO ISO 16024 2005 Personal protective equipment for protection against falls from a height - Flexible horizontal

lifeline systems /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

RESTRAINT SYSTEMS (PROTECTIVE) ISO ISO 13216-2 2004 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint

systems - P.2: Top tether anchorages and attachments /By International Organization for Standardization (ISO). Geneva: ISO, 2005.


RIVETS CSBTS


ROAD SAFETY ISO

ISO/TS 17574 2004 Road transport and traffic telematics - Electronic fee collection (EFC) - Guidelines for EFC security protection profiles /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ROAD TRANSPORT ISO

ISO/TS 17574 2004 Road transport and traffic telematics - Electronic fee collection (EFC) - Guidelines for EFC security protection profiles /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ROAD VEHICLE ENGINEERING ISO ISO 17356-1 2005 Road vehicles - Open interface for embedded automotive applications - P.1: General structure

and terms, definitions and abbreviated terms /By International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 17356-2 2005 Road vehicles - Open interface for embedded automotive applications - P.2: OSEK/VDX

specifications for binding OS,COM and NM /By International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO/TS 17574 2004 Road transport and traffic telematics - Electronic fee collection (EFC) - Guidelines for EFC

security protection profiles /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ROAD VEHICLES ISO ISO 11407 2004 Commercial road vehicles - Mechanical coupling between towing vehicles, with coupling

mounted forward and below, and centre-axle trailers - Interchangeability /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

ISO 11451-1 2005 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - P.1: General principles and terminology /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.






ISO 6722 2006 Road vehicles - 60 V and 600 V single-core cables - Dimensions, test methods and requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ROAD VEHICLES COMPONENTS ISO




ROAD VEHICLES - ELECTRIC CABLES ISO



ROAD VEHICLES - ELECTRICALLY-OPERATED DEVICES ISO


RUBBER HOSES ISO

ISO 7326 2006 Rubber and plastics hoses - Assessment of ozone resistance under static conditions /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.

RUBBER INDUSTRY ISO


SAFETY DEVICES UL

UL 94 2006 Tests for flammability of plastic materials for parts in devices and appliances /By Underwriters Laboratories Inc. (UL). Northbrook: UL, 2006.

SAFETY MEASURES ISO ISO 10821 2005 Industrial sewing machines - Safety requirements for sewing machines, units and systems /By

International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 11111-2 2005 Textile machinery - Safety requirements - P.2: Spinning preparatory and spinning machines /By

International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 11111-3 2005 Textile machinery - Safety requirements - P.3: Nonwoven machinery /By International

Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 11111-4 2005 Textile machinery - Safety requirements - P.4: Yarn processing, cordage and rope

manufacturing machinery /By International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 11111-5 2005 Textile machinery - Safety requirements - P.5: Preparatory machinery to weaving and knitting

/By International Organization for Standardization (ISO). Geneva: ISO, 2005.


ISO 11111-6 2005 Textile machinery - Safety requirements - P.6: Fabric manufacturing machinery /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 11111-7 2005 Textile machinery - Safety requirements - P.7: Dyeing and finishing machinery /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SAMPLING METHODS ISO ISO 12744 2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of

sampling /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006. ISO 13292 2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the bias of

sampling /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

SAA

AS 2806.1 2003 Aluminium ores - Sampling - P.1: Sampling procedures /By Standards Australia (SAA). New South Wales: SAA, 2003.

AS 2806.4 2004 Aluminium ores - Sampling - P.4: Determination of heterogeneity of constitution /By Standards Australia (SAA). New South Wales: SAA, 2004.

AS 2806.7 2004 Aluminium ores - Sampling - P.7: Determination of quality variation /By Standards Australia (SAA). New South Wales: SAA, 2004.

AS 2891.5 2004 Methods of sampling and testing asphalt - P.5: Determination of stability and flow - Marshall procedure /By Standards Australia (SAA). New South Wales: SAA, 2004.

SANDERS CSBTS

GB 3883.3 2007 Safety of hand-held motor-operated electric tools - P.2: Particular requirements for grinders, polishers and disk-type sanders /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

SAWS CSBTS



SEAT BELT ANCHORAGES ISO

ISO 13216-2 2004 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - P.2: Top tether anchorages and attachments /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SENSORY ANALYSIS (FOOD) ISO

ISO 13300-1 2006 Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - P.1: Staff responsibilities /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 13300-2 2006 Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - P.2: Recruitment and training of panel leaders /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

SEWING MACHINERY ISO

ISO 10821 2005 Industrial sewing machines - Safety requirements for sewing machines, units and systems /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SHACKLES SAA

AS 2741 2002 Shackles /By Standards Australia (SAA). New South Wales: SAA, 2002.

SHEAR TESTING CSBTS


SHEATHED CABLES SFS

SFS 5012 2007 Telecommunication cables, foam PE-insulated an PE-sheathed filled underground and duct pair cable VMOHBU-TL /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


SFS 5013 2007 Telecommunication cables, Foam PE-insulated and PE-sheathed filled armoured underground and underwater pair cable VMOPU /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 5740 2007 Telecommunication cables, foam PE-insulated an PE-sheathed filled aerial cable VMOHBUK-TL /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SFS 5741 2007 Telecommunication cables, Foam PE-insulated and PE-sheathed unfilled duct pair cable VMHBU-TL /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

SHEET MATERIALS CSBTS GB/T 3280 2007 Cold rolled stainless steel plate, sheet and strip /By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2007. GB/T 3621 2007 Titanium and titanium alloy plate and sheet /By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2007. GB/T 4237 2007 Hot rolled stainless steel plate, sheet and strip /By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2007. ISO 4996 2007 Hot-rolled steel sheet of high yield stress structural quality /By International Organization for

Standardization (ISO). 4th ed. Geneva: ISO, 2007.

SHIPBUILDING ISO

ISO 17884 2004 Ships and marine technology - Searchlights for high-speed craft /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

SHIPS ISO

ISO 17894 2005 Ships and marine technology - Computer applications - General principles for the development and use of programmable electronic systems in marine applications /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SOCKETS (ROPES) SAA

AS 2740 2001 Wedge-type sockets /By Standards Australia (SAA). New South Wales: SAA, 2001.


SOILS ISO

ISO 17126 2005 Soil quality - Determination of the effects of pollutants on soil flora - Screening test for emergence of lettuce seedlings (Lactuca sativa L.) /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 17312 2005 Soil quality - Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SOILS - QUALITY ISO

ISO 16720 2005 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 17126 2005 Soil quality - Determination of the effects of pollutants on soil flora - Screening test for emergence of lettuce seedlings (Lactuca sativa L.) /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 17312 2005 Soil quality - Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 17380 2004 Soil quality - Determination of total cyanide and easily released cyanide - Continuous-flow analysis method /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

SOLAR-POWERED DEVICES SFS


SOLID FUELS ISO

ISO 11723 2004 Soild mineral fuels - Determination of arsenic and selenium - Eschka's mixture and hydride generation method /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ISO 11724 2004 Solid mineral fuels - Determination of total fluorine in coal, coke and fly ash /By International Organization for Standardization (ISO) and International Organization for Standardization (ISO). Geneva: ISO, 2004.


SPACED ISO


SPECTROMETRIC METHOD CSBTS


SPINNING MACHINERY ISO

ISO 11111-2 2005 Textile machinery - Safety requirements - P.2: Spinning preparatory and spinning machines /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 16875 2004 Textile machinery - Ring spinning machines for cotton spinning - Vocabulary /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

SPRINKLER SYSTEMS NFPA

NFPA 13 2007 Standard for the installation of sprinkler systems /By National Fire Protection Association (NFPA). Quincy: NFPA, 2007.

STEEL CONVERTERS ASTM International

ASTM DS 67 B 2004 Handbook of comparative world steel standards /By John E. Bringas ed and ASTM International. 3rd ed. West Conshohoken: ASTM International, 2004.

STEEL PRODUCTS CSBTS

GB/T 1220 2007 Stainless steel bars /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.


GB/T 3280 2007 Cold rolled stainless steel plate, sheet and strip /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

STEEL STRIPS CSBTS

GB/T 3280 2007 Cold rolled stainless steel plate, sheet and strip /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

GB/T 4237 2007 Hot rolled stainless steel plate, sheet and strip /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

STEELS

CSBTS


ISO

ISO 17053 2005 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 17577 2006 Steel - Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

STERILE EQUIPMENT ISO ISO 11138-4 2006 Sterilization of health care products - Biological indicators - P.4: Biological indicators for dry

heat sterilization processes /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

STERILIZATION (HYGIENE) ISO

ISO 17665-1 2006 Sterilization of health care products - Moist heat - P.1: Requirements for the development, validation and routine control of a sterilization process for medical devices /By International Organization for Standardization (ISO). Geneva: ISO, 2006.


STERILIZATION (HYGIENE) ISO ISO 11138-4 2006 Sterilization of health care products - Biological indicators - P.4: Biological indicators for dry

heat sterilization processes /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO/TS 11139 2006 Sterilization of health care products - Vocabulary /By International Organization for

Standardization (ISO). 2nd ed. Geneva: ISO, 2006. ISO 11140-3 2007 Sterilization of health care products - Chemical indicators - P.3: Class 2 indicator systems for use

in the Bowie and Dick-type steam penetration test /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO 11140-4 2007 Sterilization of health care products - Chemical indicators - P.4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO 11140-5 2007 Sterilization of health care products - Chemical indicators - P.5: Class 2 indicators for Bowie and Dick-type air removal tests /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

ISO 13408-5 2006 Aseptic processing of health care products - P.5: Sterilization in place /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

STRIPS CSBTS

GB/T 2072 2007 Nickel and nickel alloy strips /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

STRUCTURAL CONCRETE ACI

ACI 318/318R 2005 Building code requirements for structural concrete (ACI 318-05) and Commentary (ACI 318R-05) /By American Concrete Institute (ACI). Farmington Hills: ACI, 2005.

SULPHUR ISO



SUPPORT STANDS - VEHICLES SAA

AS/NZS 2538 2004 Vehicle support stands /By Standards Australia (SAA). New South Wales: SAA, 2004.

SURFACE-ROUGHNESS MEASUREMENT ASME

ASME B46.1 2002 Surface texture (surface roughness, waviness, and lay) /By American Society of Mechanical Engineers (ASME) and American National Standards Institute (ANSI). New York: ASME, 2002.

SURFACE TEXTURE ASME

ASME B46.1 2002 Surface texture (surface roughness, waviness, and lay) /By American Society of Mechanical Engineers (ASME) and American National Standards Institute (ANSI). New York: ASME, 2002.

SURFACE TREATMENT ISO ISO 17836 2004 Thermal spraying - Determination of the deposition efficiency for thermal spraying /By


SUSPENDED CEILINGS SAA AS/NZS 2785 2000 Suspended ceilings - Design and installation /By Standards Australia (SAA). New South

Wales: SAA, 2000.

SWITCHGEAR - CONTROL DEVICES SFS SFS 6000-8-810 2007 Low-voltage electrical installations - P.8-810: Supplementary requirements for certain

installations - Switchgear assemblies /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

TACHOGRAPHS ISO ISO 16844-3 2004 Road vehicles - Tachograph systems - P.3: Motion sensor interface /By International

Organization for Standardization (ISO). Geneva: ISO, 2004.


TANKERS SAA

AS 2809.4 2001 Road tank vehicles for dangerous goods - P.4: Tankers for toxic and corrosive cargoes /By Standards Australia (SAA). New South Wales: SAA, 2001.

AS 2809.5 2001 Road tank vehicles for dangerous goods - P.5: Tankers for bitumen-based products /By Standards Australia (SAA). New South Wales: SAA, 2001.

AS 2809.6 2001 Road tank vehicles for dangerous goods - P.6: Tankers for cryogenic liquids /By Standards Australia (SAA). New South Wales: SAA, 2001.

TANKERS DANGEROUS MATERIALS SAA

AS 2809.4 2001 Road tank vehicles for dangerous goods - P.4: Tankers for toxic and corrosive cargoes /By Standards Australia (SAA). New South Wales: SAA, 2001.

AS 2809.5 2001 Road tank vehicles for dangerous goods - P.5: Tankers for bitumen-based products /By Standards Australia (SAA). New South Wales: SAA, 2001.

AS 2809.6 2001 Road tank vehicles for dangerous goods - P.6: Tankers for cryogenic liquids /By Standards Australia (SAA). New South Wales: SAA, 2001.

TANKS (CONTAINERS) AWWA ANSI/AWWA D102 2003 Coating steel water-storage tanks /By American Water Works Association (AWWA) and

American National Standards Institute (ANSI). Denver: AWWA, 2003. ANSI/AWWA D104 2004 Automatically controlled, impressed-current cathodic protection for the interior of steel

water tanks /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

ANSI/AWWA D110 2004 Wire-and strand- wound, circular, prestressed concrete water tanks /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

ANSI/AWWA D115 2006 Tendon-prestressed concrete water tanks /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2006.

ANSI/AWWA D120 2002 Thermosetting fiberglass - Reinforced plastic tanks /By American Water Works Association (AWWA). Denver: AWWA, 2002.


TANKS (CONTAINERS) - STEELS AWWA ANSI/AWWA D104 2004 Automatically controlled, impressed-current cathodic protection for the interior of steel

water tanks /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

TECHNICAL DOCUMENTS ISO ISO 13232-8 2005 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective

devices fitted to motorcycles - P.8: Documentation and reports /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

TELECOMMUNICATION SYSTEMS SFS SFS 3157 2007 Telecommunication cables, PE-insulated and PE-sheathed drop wires MU 1 x 4 x 0,8 and MHBU 1

x 4 x 0,8 /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

TESTING ISO ISO 17070 2006 Leather - Chemical tests - Determination of pentachlorophenol content /By International

Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 17076 2006 Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive

leather /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO/IEC 10373-1 2006 Identification cards - Test methods - P.1: General characteristics /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006. ISO/IEC 10373-2 2006 Identification cards - Test methods - P.2: Cards with magnetic stripes /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006. ISO/IEC 10373-5 2006 Identification cards - Test methods - P.5: Optical memory cards /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

TEXTILE MACHINERY AND ACCESSORIES ISO ISO 11111-2 2005 Textile machinery - Safety requirements - P.2: Spinning preparatory and spinning machines /By



ISO 11111-3 2005 Textile machinery - Safety requirements - P.3: Nonwoven machinery /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 11111-4 2005 Textile machinery - Safety requirements - P.4: Yarn processing, cordage and rope manufacturing machinery /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 11111-5 2005 Textile machinery - Safety requirements - P.5: Preparatory machinery to weaving and knitting /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 11111-6 2005 Textile machinery - Safety requirements - P.6: Fabric manufacturing machinery /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 11111-7 2005 Textile machinery - Safety requirements - P.7: Dyeing and finishing machinery /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

TEXTILE TESTING ISO

ISO 3759 2007 Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007.


TEXTILES AATCC

AATCC 2007 Technical manual of the American Association of Textile Chemists and Colorists /By American Association of Textile Chemists and Colorists (AATCC). Research Triangle Park: AATCC, 2006.

IHS

CGSB Database /By Canadian General Standards Board (CGSB) and Information Handling Services (IHS). Englewood: IHS, 2006.

THERMAL ENVIRONMENT SYSTEMS ISO

ISO 13732-3 2005 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - P.3: Cold surfaces /By International Organization for Standardization (ISO). Geneva: ISO, 2005.


THERMOPLASTIC POLYMERS ISO ISO 188 2007 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests /By International

Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007. SFS SFS 5401 2007 Pipe supporting. Pipe clamps DN 600...1200 for FRP pipes standardized according to inside

diameter and for FRP reinforced thermoplastics pipes /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5403 2007 Pipe supporting. Pipe clamps DN 630...1200 for thermoplastics pipes standardized according to

outside diameter /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5886 2007 Pipe supporting. Pipe clamps DN 200...500 for FRP pipes standardized according to inside

diameter and for FRP reinforced thermoplastics pipes /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5888 2007 Pipe supporting. Pipe clamps DN 16...180 for thermoplastics pipes standardized according to

outside diameter /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5889 2007 Pipe supporting. Pipe clamps DN 200...560 for thermoplastics pipes standardized according to

outside diameter /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.

THERMOPLASTIC POLYMERS - PIPELINES SFS SFS 5400 2007 Pipe supporting. Pipe clamps DN 15...500 for FRP pipes standardized according to inside diameter

and for FRP reinforced thermoplastics pipes /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5402 2007 Pipe supporting. Pipe clamps DN 16...560 for thermoplastics pipes standardized according to

outside diameter /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. SFS 5885 2007 Pipe supporting. Pipe clamps DN 15...150 for FRP pipes standardized according to inside diameter

and for FRP reinforced thermoplastics pipes /By Finnish Standards Association (SFS). Helsinki: SFS, 2007. THERMOPLASTIC RUBBER ISO ISO 814 2007 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method /By

International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007.

THERMOSETTING MATERIALS AWWA ANSI/AWWA D120 2002 Thermosetting fiberglass - Reinforced plastic tanks /By American Water Works

Association (AWWA). Denver: AWWA, 2002.


THREADS ASME


TIME ISO


TISSUE PAPER ISO

ISO 12625-1 2005 Tissue paper and tissue products - P.1: General guidance on terms /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 12625-8 2006 Tissue paper and tissue products - P.8: Water-absorption time and water-absorption capacity, basket-immersion test method /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 12625-9 2005 Tissue paper and tissue products - P.9: Determination of ball burst strength /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

TITANIUM ALLOYS CSBTS GB/T 3620.1 2007 Designation and composition of titanium and titanium alloys /By China State Bureau of Quality

and Technical Supervision (CSBTS). Beijing: CSBTS, 2007. GB/T 3620.2 2007 Titanium and titanium alloys - Permissible variations of chemical composition for wrought

product analysis /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007. GB/T 3621 2007 Titanium and titanium alloy plate and sheet /By China State Bureau of Quality and Technical

Supervision (CSBTS). Beijing: CSBTS, 2007. GB/T 3623 2007 Titanium and titanium alloy wire /By China State Bureau of Quality and Technical Supervision

(CSBTS). Beijing: CSBTS, 2007. GB/T 3625 2007 Titanium and titanium alloy tube for condensers and heat exchangers /By China State Bureau of



TITANIUM ORES SAA

AS 2864.1 2003 Methods for the analysis of rutile - P.1: Determination of titanium content - Titrimetric method /By Standards Australia (SAA). New South Wales: SAA, 2003.

TOOLS CSBTS GB/T 2900.28 2007 Electrotechnical terminology - Electric tool /By China State Bureau of Quality and Technical


TRANSPORTATION ISO ISO 16106 2006 Packaging - Transport packages for dangerous goods - Dangerous goods packaging, intermediate

bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

TROLLEYS SAA AS/NZS 2615 2004 Hydraulic trolley jacks /By Standards Australia (SAA). 6th ed. New South Wales: SAA, 2004.

TUBES CSBTS GB/T 3625 2007 Titanium and titanium alloy tube for condensers and heat exchangers /By China State Bureau of


ULTRASONIC TESTING ISO ISO 17577 2006 Steel - Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm /By


UNDERGROUND ELECTRIC POWER DISTRIBUTION SFS SFS 5013 2007 Telecommunication cables, Foam PE-insulated and PE-sheathed filled armoured underground and

underwater pair cable VMOPU /By Finnish Standards Association (SFS). Helsinki: SFS, 2007.


UNDERGROUND STRUCTURES AWWA


UNITS OF MEASUREMENT ISO ISO 80000-3 2006 Quantities and units - P.3: Space and time /By International Organization for Standardization

(ISO). Geneva: ISO, 2006. ISO 80000-4 2006 Quantities and units - P.4: Mechanics /By International Organization for Standardization (ISO).

Geneva: ISO, 2006.

VALVES AWWA


VEGETABLE FATS ISO ISO 17932 2005 Animal and vegetable fats and oils - Determination of the deterioration of bleachability index


VEGETABLE OILS ISO ISO 17932 2005 Animal and vegetable fats and oils - Determination of the deterioration of bleachability index


VEGETABLES ISO ISO 17239 2004 Fruits, vegetables and derived products - Determination of arsenic content - Method using hydride

generation atomic absorption spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 17240 2004 Fruit and vegetable products - Determination of tin content - Method using flame atomic

absorption spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2004.


VENTILATION SAA

AS 2665 2001 Smoke/heat venting systems - Design, installation and commissioning /By Standards Australia (SAA). 2nd ed. New South Wales: SAA, 2001.

NFPA NFPA 90A 2002 Standard for the installation of air-conditioning and ventilating systems /By National Fire

Protection Association (NFPA). Quincy: NFPA, 2002.

VIBRATION EFFECTS (HUMAN BODY) SAA AS 2670.1 2001 Evaluation of human exposure to whole-body vibration - P.1: General requirements /By Standards

Australia (SAA). New South Wales: SAA, 2001. AS 2670.4 2001 Evaluation of human exposure to whole-body vibration - P.4: Guidelines for the evaluation of the

effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems /By Standards Australia (SAA). New South Wales: SAA, 2001.

VOCABULARY ISO ISO/TS 11139 2006 Sterilization of health care products - Vocabulary /By International Organization for

Standardization (ISO). 2nd ed. Geneva: ISO, 2006. ISO 11452-1 2005 Road vehicles - Component test methods for electrical disturbances from narrowband radiated


VOLUMETRIC ANALYSIS

SAA AS 2864.1 2003 Methods for the analysis of rutile - P.1: Determination of titanium content - Titrimetric method /By

Standards Australia (SAA). New South Wales: SAA, 2003.

VULCANIZED RUBBER CSBTS GB/T 1693 2007 Rubber, vulcanized - Determination of dielectric constant and dielectric loss tangent /By China

State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.


ISO ISO 188 2007 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests /By International

Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007. ISO 814 2007 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method /By

International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2007. ISO 13226 2005 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on

vulcanized rubbers /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

WASHING ISO


WATER-ABSORPTION TESTS ISO

ISO 12625-8 2006 Tissue paper and tissue products - P.8: Water-absorption time and water-absorption capacity, basket-immersion test method /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

WATER HEATERS SAA AS/NZS 2712 2002 Solar and heat pump water heaters - Design and construction /By Standards Australia (SAA).


WATER PIPES AWWA ANSI/AWWA C224 2001 Two-layer nylon-11-based polyamide coating system for the interior and exterior of steel

water pipe, connections, fittings, and special sections /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2001.

WATER - QUALITY ISO ISO 16712 2005 Water quality - Determination of acute toxicity of marine or estuarine sediment to amphipods /By



WATER STORAGE AWWA

ANSI/AWWA C652 2002 Disinfection of water-storage facilities /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.

ANSI/AWWA D102 2003 Coating steel water-storage tanks /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2003.

ANSI/AWWA D104 2004 Automatically controlled, impressed-current cathodic protection for the interior of steel water tanks /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

ANSI/AWWA D110 2004 Wire-and strand- wound, circular, prestressed concrete water tanks /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

WATER SUPPLY ISO ISO 4427-2 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - P.2: Pipes /By

International Organization for Standardization (ISO). Geneva: ISO, 2007. ISO 4427-3 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - P.3: Fittings /By

International Organization for Standardization (ISO). Geneva: ISO, 2007. ISO 4427-5 2007 Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - P.5: Fitness for

purpose of the system /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

WATER SUPPLY METERS AWWA ANSI/AWWA C701 2002 Cold-water meters - Turbine type, for customer service /By American Water Works

Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002. ANSI/AWWA C702 2001 Cold-water meters - Compound type /By American Water Works Association (AWWA)

and American National Standards Institute (ANSI). Denver: AWWA, 2001. ANSI/AWWA C704 2002 Propeller-type meters for waterworks applications /By American Water Works

Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002. ANSI/AWWA C707 2005 Encoder-type remote-registration systems for cold-water meters /By American Water

Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.


ANSI/AWWA C708 2005 Cold-water meters - Multijet type /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA C710 2002 Cold-water meters - Displacement type, plastic main case /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.

ANSI/AWWA C712 2002 Cold-water meters - Singlejet type /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.

ANSI/AWWA C713 2005 Cold-water meters - Fluidic-oscillator type /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

WATER TREATMENT AWWA

ANSI/AWWA C653 2003 Disinfection of water treatment plants /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2003.

ANSI/AWWA G100 2005 Water treatment plant operation and management /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

WATERWORKS AWWA

ANSI/AWWA C226 2006 Stainless-steel fittings for waterworks service, size ½ in. through 72 in. (13 mm through 1,800 mm) /By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2006.

WELDED JOINTS ISO

ISO 17641-2 2005 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - P.2: Self-restraint tests /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

WELDING EQUIPMENT ISO

ISO 17662 2005 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities /By International Organization for Standardization (ISO). Geneva: ISO, 2005.


WIRES CSBTS

GB/T 3623 2007 Titanium and titanium alloy wire /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

WOOD SAA

AS/NZS 2878 2000 Timber - Classification into strength groups /By Standards Australia (SAA). New South Wales: SAA, 2000.

WOOD PRESERVATIVES SAA AS/NZS 2843.1 2006 Timber preservation plants - P.1: Timber preservation plant site design /By Standards

Australia (SAA). New South Wales: SAA, 2006. AS/NZS 2843.2 2006 Timber preservation plants - P.2: Treatment area operation /By Standards Australia (SAA).


WROUGHT ALLOYS CSBTS GB/T 3620.2 2007 Titanium and titanium alloys - Permissible variations of chemical composition for wrought

product analysis /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2007.

YIELD STRESS ISO ISO 4996 2007 Hot-rolled steel sheet of high yield stress structural quality /By International Organization for

Standardization (ISO). 4th ed. Geneva: ISO, 2007.

ZINC ISO ISO 12744 2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision of

sampling /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006. ISO 13292 2006 Copper, lead, zinc and nickel concentrates - Experimental methods for checking the bias of

sampling /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.


มาตรฐานไทย การตรวจประเมิน มอก. 5023 2549 วิธีการชี้บอกความสอดคลองกับมาตรฐาน สําหรับระบบการรับรองโดยบคุคลที่สาม

มอก. 5053 2549 การตรวจสอบและรับรอง - ขอแนะนําในการใชระบบการจดัการคุณภาพขององคกรในการรับรองผลิตภัณฑ

มอก. 5060 2549 การตรวจสอบและรับรอง - หลักปฏิบัติที่ดี

มอก. 5067 2549 การตรวจสอบและรับรอง - หลักการพื้นฐานของการรับรองผลิตภัณฑ

มอก. 5068 2549 การตกลงสําหรับการยอมรับและการยอมรบัผลการตรวจสอบและรับรองไปใช

มอก. 17021 2550 การตรวจสอบและรับรองขอกําหนดสําหรับหนวยตรวจประเมินและใหการรับรองระบบการจัดการ

มอก. 17040 2549 การตรวจสอบและรับรอง - ขอกําหนดทั่วไปวาดวยการประเมินเพื่อการยอมรับรวมของหนวยตรวจสอบและรับรองและหนวยรับรองระบบงาน

การมาตรฐาน มอก. 5002 2549 การมาตรฐานและกิจกรรมที่เกี่ยวของ - คาํศัพททั่วไป

การมาตรฐาน - ศัพทบัญญัติ มอก. 5002 2549 การมาตรฐานและกิจกรรมที่เกี่ยวของ - คาํศัพททั่วไป

การรับรองตนเอง มอก. 17050 2549 การตรวจสอบและรับรอง - การรับรองตนเองของผูประกอบการ มอก. 17050 ล.1 2549 เลม 1 ขอกําหนดทั่วไป มอก. 17050 ล.2 2549 เลม 2 เอกสารสนับสนุน

การรับรองผลิตภัณฑ มอก. 5023 2549 วิธีการชี้บอกความสอดคลองกับมาตรฐาน สําหรับระบบการรับรองโดยบุคคลที่สาม

มอก. 5028 2549 การตรวจสอบและรับรอง-ขอแนะนําการรับรองผลิตภัณฑโดยบุคคลที่สาม

การรับรองระบบงาน มอก. 17021 2550 การตรวจสอบและรับรองขอกําหนดสําหรับหนวยตรวจประเมินและใหการรับรองระบบการ

จัดการ.


มอก. 17040 2549 การตรวจสอบและรับรอง - ขอกําหนดทัว่ไปวาดวยการประเมินเพือ่การยอมรับรวมของหนวยตรวจสอบและรับรองและหนวยรับรองระบบงาน

ความปลอดภยั มอก. 1516 2549 เครือ่งฟอกอากาศ เฉพาะดานความปลอดภัย

มอก. 1985 2549 เครือ่งใชไฟฟาสําหรับการดูแลผิวหรอืผม เฉพาะดานความปลอดภัย

มอก. 2235 2548 หลอดฟลอูอเรสเซนซขั้วเดี่ยว เฉพาะดานความปลอดภัย

มอก. 2333 2550 ระบบการใชกาซธรรมชาติอัดเปนเชื้อเพลิงในยานยนต เลม 1 ขอกําหนดดานความปลอดภัย เลม 2 วิธีทดสอบ

คอนกรีต มอก. 2187 2547 รอยตอแนวระดับแบบทั่วไประหวางชิ้นสวนผนังคอนกรีตภายนอกสําเร็จรูปชนิดธรรมดากับ

พื้นคอนกรีต - สมบัติ คุณลักษณะ และเกณฑการจําแนกประเภท มอก. 2188 2547 รอยตอแนวดิ่งแบบทั่วไประหวางชิ้นสวนผนงัคอนกรีตภายนอกสําเร็จรูป 2 สวน ชนิดธรรมดา

- สมบัติ คุณลักษณะ และเกณฑการจําแนกประเภท มอก. 2189 2547 รอยตอรองแนวดิ่งระหวางแผนคอนกรีตเสรมิแรงขนาดใหญที่ยึดดวยคอนกรีตเสริมเหล็ก - วิธี

ทดสอบทางกลในหองปฏิบัติการ - ผลจากการใหโหลดในแนวสัมผัส มอก. 2190 2547 รอยตอแนวระดับระหวางผนงัที่รับโหลดกับพื้นคอนกรีต - วิธีทดสอบทางกลในหองปฏิบติัการ

- ผลจากการใหโหลดในแนวดิ่งและโมเมนตสงผานจากพื้น มอก. 2226 2548 แผนผนังคอนกรีตสําเร็จรูป

เครื่องใชไฟฟาในบาน มอก. 1516 2549 เครือ่งฟอกอากาศ เฉพาะดานความปลอดภัย

มอก. 1985 2549 เครือ่งใชไฟฟาสําหรับการดูแลผิวหรอืผม เฉพาะดานความปลอดภัย

เครื่องดัดผม มอก. 1985 2549 เครือ่งใชไฟฟาสําหรับการดูแลผิวหรอืผม เฉพาะดานความปลอดภัย

เครื่องเปาผม มอก. 1985 2549 เครือ่งใชไฟฟาสําหรับการดูแลผิวหรอืผม เฉพาะดานความปลอดภัย

เครื่องเปามือ มอก. 1985 2549 เครือ่งใชไฟฟาสําหรับการดูแลผิวหรอืผม เฉพาะดานความปลอดภัย


เครื่องฟอกอากาศ มอก. 1516 2549 เครื่องฟอกอากาศ เฉพาะดานความปลอดภัย

เครื่องมวนผม มอก. 1985 2549 เครื่องใชไฟฟาสําหรับการดูแลผิวหรือผม เฉพาะดานความปลอดภัย

เครื่องมอืทดสอบ มอก. 2169 ล.2 2547 ความแข็งวิกเกอรสสําหรับโลหะ เลม 2 การทวนสอบเครือ่งทดสอบ มอก. 2170 ล.2 2547 ความแข็งบริเนลลสําหรับโลหะ เลม 2 การทวนสอบและการสอบเทียบเครื่องทดสอบ มอก. 2171 2547 ความแข็งรอกเวลลสําหรับโลหะ

มอก. 2171 ล.2 2547 เลม 2 การทวนสอบและการสอบเทียบเครือ่งทดสอบ (สเกล A, B, C, D, E, F, G, H, K, N, T)

มอก. 2171 ล.3 2547 เลม 3 การสอบเทียบแทงความแข็งอางอิง (สเกล A, B, C, D, E, F, G, H, K, N, T)

เครื่องสุขภัณฑ - อุปกรณ มอก. 1497 2548 ชุดหัวฉีดชะลาง

เครื่องหมายและสัญลักษณ มอก. 2193 2547 ทอเหล็กกลา - การทําเครื่องหมายอักขระแบบตอเนื่องและการใหรหัสสสีําหรับการชี้บงวัตถุดิบ

เครื่องอบผวิหนา มอก. 1985 2549 เครือ่งใชไฟฟาสําหรับการดูแลผิวหรอืผม เฉพาะดานความปลอดภัย

ฉนวนกันความรอน มอก. 2303 2549 แผนฉนวนความรอนใยแร

ชุดหัวฉีด มอก. 1497 2548 ชุดหัวฉีดชะลาง

ตะแกรง มอก. 737 2549 ตะแกรงเหลก็กลาเชื่อมติดเสริมคอนกรีต

ทอ มอก. 81 2548 ทอซีเมนตใยหนิชนิดทนความดัน มอก. 2191 2547 ทอเหล็กกลา - ระบบคาความคลาดเคลื่อน


มอก. 2192 2547 ทอเหล็กกลา - การเตรียมปลายทอและอุปกรณประกอบสําหรับการเชือ่ม มอก. 2193 2547 ทอเหล็กกลา - การทําเครื่องหมายอักขระแบบตอเนื่องและการใหรหัสสสีําหรับการชี้บงวัตถุดิบ มอก. 2195 2547 ทอเหล็กเหนียว - การทดสอบความดันน้ําภายหลังการติดต้ัง

ทอ - ขอตอ มอก. 126 2548 ขอตอซีเมนตใยหินชนิดทนความดัน มอก. 2196 2547 งานทอ - ขอตอเหล็กกลาไรสนิมแบบเกลียวตามมาตรฐาน ISO 7-1 มอก. 2197 2547 ขอตอเหล็กกลาไมเจือแบบเกลียวตามมาตรฐาน ISO 7/1 มอก. 2253 2548 ขอตอเหล็กหลอแกรไฟตกลมสําหรับทอสงน้าํชนิดทนความดัน

ทอ - อุปกรณ มอก. 126 2548 ขอตอซีเมนตใยหินชนิดทนความดัน มอก. 2196 2547 งานทอ - ขอตอเหล็กกลาไรสนิมแบบเกลียวตามมาตรฐาน ISO 7-1 มอก. 2197 2547 ขอตอเหล็กกลาไมเจือแบบเกลียวตามมาตรฐาน ISO 7/1 มอก. 2253 2548 ขอตอเหล็กหลอแกรไฟตกลมสําหรับทอสงน้าํชนิดทนความดัน

ประตู มอก. 192 2549 บานประตูแผนไมประกอบ

ปูนซีเมนต มอก. 80 2550 ปูนซีเมนตผสม

ปูนยิปซัม มอก. 1057 2549 ปูนยิปซัมผสม

ปูนไลม มอก. 202 ล.1 2548 ปูนไลม เลม 1 บทนิยามเกี่ยวกับปูนไลมและหินปูน

ปูนไลม - ศัพทบัญญัติ มอก. 202 ล.1 2548 ปูนไลม เลม 1 บทนิยามเกี่ยวกับปูนไลมและหินปูน

ผูประกอบการ - ขอกําหนด มอก. 17050 2549 การตรวจสอบและรับรอง - การรับรองตนเองของผูประกอบการ

มอก. 17050 ล.1 2549 เลม 1 ขอกําหนดทั่วไป มอก. 17050 ล.2 2549 เลม 2 เอกสารสนับสนุน


แผนผนงั มอก. 2314 2549 แผนผนังอะลูมิเนียม

แผนไม มอก. 178 2549 แผนไมอัด

แผนใยแร มอก. 2303 2549 แผนฉนวนความรอนใยแร

มอเตอร มอก. 866 2550 มอเตอรเหนีย่วนํา มอก. 867 2550 มอเตอรเหนีย่วนําสามเฟส: ประสิทธิภาพขั้นตํ่า

ยานยนต - ชิ้นสวน มอก. 2325 2550 ยานยนตที่ใชบนถนน-สวนควบและเครือ่งอุปกรณระบบเชื้อเพลิงกาซธรรมชาติอัด

มอก. 2325 ล.1 2550 เลม 1 ขอกําหนดทั่วไปและบทนิยาม มอก. 2325 ล.2 2550 เลม 2 วิธีทดสอบคุณลักษณะทั่วไปและคุณลักษณะที่ตองการ มอก. 2325 ล.3 2550 เลม 3 ลิ้นกนักลับ มอก. 2325 ล.4 2550 เลม 4 ลิ้นเปด-ปดดวยมือ มอก. 2325 ล.5 2550 เลม 5 ลิ้นหัวถงัเปด-ปดดวยมือ มอก. 2325 ล.6 2550 เลม 6 ลิ้นเปด-ปดอัตโนมัติ มอก. 2325 ล.7 2550 เลม 7 หัวฉีดกาซ มอก. 2325 ล.8 2550 เลม 8 อุปกรณแสดงคาความดัน มอก. 2325 ล.9 2550 เลม 9 อุปกรณปรับความดัน มอก. 2325 ล.10 2550 เลม 10 อุปกรณปรับการไหลของกาซ มอก. 2325 ล.11 2550 เลม 11 อุปกรณผสมกาซ/อากาศ มอก. 2325 ล.12 2550 เลม 12 ลิน้ระบายความดัน มอก. 2325 ล.13 2550 เลม 13 อุปกรณระบายความดัน มอก. 2325 ล.14 2550 เลม 14 ลิ้นปองกันการไหลเกนิ มอก. 2325 ล.15 2550 เลม 15 เรื่อนกกักาซและทอออนระบายกาซ มอก. 2325 ล.16 2550 เลม 16 ทอเชื้อเพลิงคงตัว มอก. 2325 ล.17 2550 เลม 17 ทอเชื้อเพลิงยืดหยุน มอก. 2325 ล.18 2550 เลม 18 ตัวกรอง มอก. 2325 ล.19 2550 เลม 19 ขอตอ


มอก. 2333 ล.1 และ 2 2550 ระบบการใชกาซธรรมชาติอัดเปนเชื้อเพลิงในยานยนต มอก. 2333 ล.1 2550 เลม 1 ขอกําหนดดานความปลอดภัย

มอก. 2333 ล.2 2550 เลม 2 วิธีทดสอบ

ยานยนต - ระบบเชื้อเพลิง มอก. 2325 2550 ยานยนตที่ใชบนถนน-สวนควบและเครื่องอุปกรณระบบเชื้อเพลิงกาซธรรมชาติอัด

มอก. 2325 ล.1 2550 เลม 1 ขอกําหนดทั่วไปและบทนิยาม มอก. 2325 ล.2 2550 เลม 2 วิธีทดสอบคุณลักษณะทั่วไปและคุณลักษณะที่ตองการ มอก. 2325 ล.3 2550 เลม 3 ลิ้นกนักลับ มอก. 2325 ล.4 2550 เลม 4 ลิ้นเปด-ปดดวยมือ มอก. 2325 ล.5 2550 เลม 5 ลิ้นหัวถงัเปด-ปดดวยมือ มอก. 2325 ล.6 2550 เลม 6 ลิ้นเปด-ปดอัตโนมัติ มอก. 2325 ล.7 2550 เลม 7 หัวฉีดกาซ มอก. 2325 ล.8 2550 เลม 8 อุปกรณแสดงคาความดัน มอก. 2325 ล.9 2550 เลม 9 อุปกรณปรับความดัน มอก. 2325 ล.10 2550 เลม 10 อุปกรณปรับการไหลของกาซ มอก. 2325 ล.11 2550 เลม 11 อุปกรณผสมกาซ/อากาศ มอก. 2325 ล.12 2550 เลม 12 ลิน้ระบายความดัน มอก. 2325 ล.13 2550 เลม 13 อุปกรณระบายความดัน มอก. 2325 ล.14 2550 เลม 14 ลิ้นปองกันการไหลเกนิ มอก. 2325 ล.15 2550 เลม 15 เรื่อนกกักาซและทอออนระบายกาซ มอก. 2325 ล.16 2550 เลม 16 ทอเชื้อเพลิงคงตัว มอก. 2325 ล.17 2550 เลม 17 ทอเชื้อเพลิงยืดหยุน มอก. 2325 ล.18 2550 เลม 18 ตัวกรอง มอก. 2325 ล.19 2550 เลม 19 ขอตอ

มอก. 2333 ล.1 และ 2 2550 ระบบการใชกาซธรรมชาติอัดเปนเชื้อเพลิงในยานยนต มอก. 2333 ล.1 2550 เลม 1 ขอกําหนดดานความปลอดภัย มอก. 2333 ล 2 2550 เลม 2 วิธีทดสอบ

ยานยนต - ศัพทบัญญัติ มอก. 2325 ล.1 2550 ยานยนตที่ใชบนถนน-สวนควบและเครื่องอุปกรณระบบเชื้อเพลิงกาซธรรมชาติอัด เลม 1

ขอกําหนดทั่วไปและบทนิยาม


รถยนต - ชิ้นสวน มอก. 2325 2550 ยานยนตที่ใชบนถนน-สวนควบและเครือ่งอุปกรณระบบเชื้อเพลิงกาซธรรมชาติอัด

มอก. 2325 ล.2 2550 เลม 2 วิธีทดสอบคุณลักษณะทั่วไปและคุณลักษณะที่ตองการ มอก. 2325 ล.3 2550 เลม 3 ลิ้นกันกลับ มอก. 2325 ล.4 2550 เลม 4 ลิ้นเปด-ปดดวยมือ มอก. 2325 ล.5 2550 เลม 5 ลิ้นหัวถงัเปด-ปดดวยมือ มอก. 2325 ล.6 2550 เลม 6 ลิ้นเปด-ปดอัตโนมัติ มอก. 2325 ล.7 2550 เลม 7 หัวฉีดกาซ มอก. 2325 ล.8 2550 เลม 8 อุปกรณแสดงคาความดัน มอก. 2325 ล.9 2550 เลม 9 อุปกรณปรับความดัน มอก. 2325 ล.10 2550 เลม 10 อุปกรณปรับการไหลของกาซ มอก. 2325 ล.11 2550 เลม 11 อุปกรณผสมกาซ/อากาศ มอก. 2325 ล.12 2550 เลม 12 ลิ้นระบายความดัน มอก. 2325 ล.13 2550 เลม 13 อุปกรณระบายความดัน มอก. 2325 ล.14 2550 เลม 14 ลิ้นปองกันการไหลเกิน มอก. 2325 ล.15 2550 เลม 15 เรื่อนกักกาซและทอออนระบายกาซ มอก. 2325 ล.16 2550 เลม 16 ทอเชื้อเพลิงคงตัว มอก. 2325 ล.17 2550 เลม 17 ทอเชื้อเพลิงยดืหยุน มอก. 2325 ล.18 2550 เลม 18 ตัวกรอง มอก. 2325 ล.19 2550 เลม 19 ขอตอ


รถยนต - ระบบเชื้อเพลิง

มอก. 2325 2550 ยานยนตที่ใชบนถนน-สวนควบและเครือ่งอุปกรณระบบเชื้อเพลิงกาซธรรมชาติอัด มอก. 2325 ล.2 2550 เลม 2 วิธีทดสอบคุณลักษณะทั่วไปและคุณลักษณะที่ตองการ มอก. 2325 ล.3 2550 เลม 3 ลิ้นกันกลับ มอก. 2325 ล.4 2550 เลม 4 ลิ้นเปด-ปดดวยมือ มอก. 2325 ล.5 2550 เลม 5 ลิ้นหัวถงัเปด-ปดดวยมือ มอก. 2325 ล.6 2550 เลม 6 ลิ้นเปด-ปดอัตโนมัติ มอก. 2325 ล.7 2550 เลม 7 หัวฉีดกาซ


มอก. 2325 ล.8 2550 เลม 8 อุปกรณแสดงคาความดัน มอก. 2325 ล.9 2550 เลม 9 อุปกรณปรับความดัน มอก. 2325 ล.10 2550 เลม 10 อุปกรณปรับการไหลของกาซ มอก. 2325 ล.11 2550 เลม 11 อุปกรณผสมกาซ/อากาศ มอก. 2325 ล.12 2550 เลม 12 ลิ้นระบายความดัน มอก. 2325 ล.13 2550 เลม 13 อุปกรณระบายความดัน มอก. 2325 ล.14 2550 เลม 14 ลิ้นปองกันการไหลเกิน มอก. 2325 ล.15 2550 เลม 15 เรื่อนกักกาซและทอออนระบายกาซ มอก. 2325 ล.16 2550 เลม 16 ทอเชื้อเพลิงคงตัว มอก. 2325 ล.17 2550 เลม 17 ทอเชื้อเพลิงยดืหยุน มอก. 2325 ล.18 2550 เลม 18 ตัวกรอง มอก. 2325 ล.19 2550 เลม 19 ขอตอ


รถยนต - ศัพทบัญญัติ

มอก. 2325 ล.1 2550 ยานยนตที่ใชบนถนน-สวนควบและเครื่องอุปกรณระบบเชื้อเพลิงกาซธรรมชาติอัด มอก. 2325 ล.1 2550 เลม 1 ขอกําหนดทั่วไปและบทนิยามตอ

ระบบคุณภาพ มอก. 5023 2549 วิธีการชี้บอกความสอดคลองกับมาตรฐาน สําหรับระบบการรับรองโดยบคุคลที่สาม มอก. 5028 2549 การตรวจสอบและรับรอง-ขอแนะนําการรับรองผลิตภัณฑโดยบุคคลที่สาม มอก. 5053 2549 การตรวจสอบและรับรอง - ขอแนะนําในการใชระบบการจดัการคุณภาพขององคกรในการ

รับรองผลิตภัณฑ มอก. 5060 2549 การตรวจสอบและรับรอง - หลักปฏิบัติที่ดี มอก. 5067 2549 การตรวจสอบและรับรอง - หลักการพื้นฐานของการรับรองผลิตภัณฑ มอก. 5068 2549 การตกลงสําหรับการยอมรับและการยอมรบัผลการตรวจสอบและรับรองไปใช มอก. 9000 2550 ระบบการบริหารงานคุณภาพ: หลักการพืน้ฐานและคําศัพท มอก. 17021 2550 การตรวจสอบและรับรองขอกําหนดสําหรับหนวยตรวจประเมินและใหการรับรองระบบการ

จัดการ



มอก. 17050 2549 การตรวจสอบและรับรอง – การรับรองตนเองของผูประกอบการ มอก. 17050 ล.1 2549 เลม 1 ขอกําหนดทั่วไป มอก. 17050 ล.2 2549 เลม 2 เอกสารสนับสนุน

ระบบคุณภาพ - ศัพทบัญญัติ มอก. 9000 2550 ระบบการบริหารงานคุณภาพ: หลักการพืน้ฐานและคําศัพท

ระบบบริหารงานคุณภาพ มอก. 9000 2550 ระบบการบริหารงานคุณภาพ: หลักการพืน้ฐานและคําศัพท

ระบบบริหารงานคุณภาพ - ศัพทบัญญัติ มอก. 9000 2550 ระบบการบริหารงานคุณภาพ: หลักการพืน้ฐานและคําศัพท

ลวด มอก. 2176 2547 การทดสอบลวดโลหะโดยการบิด มอก. 2177 2547 การทดสอบลวดโลหะโดยการบิดกลับ

โลหะ มอก. 2169 2547 ความแข็งวิกเกอรสสําหรับโลหะ มอก. 2169 ล.1 2547 เลม 1 วิธีทดสอบ มอก. 2169 ล.2 2547 เลม 2 การทวนสอบเครือ่งทดสอบ มอก. 2169 ล.3 2547 เลม 3 การสอบเทียบแทงความแข็งอางอิง มอก. 2170 2547 ความแข็งบริเนลลสําหรับโลหะ

มอก. 2170 ล.1 2547 เลม 1 วิธีทดสอบ มอก. 2170 ล.2 2547 เลม 2 การทวนสอบและการสอบเทียบเครือ่งทดสอบ มอก. 2170 ล.3 2547 เลม 3 การสอบเทียบแทงความแข็งอางอิง

มอก. 2171 2547 ความแข็งรอกเวลลสําหรับโลหะ มอก. 2171 ล.1 2547 เลม 1 วิธีทดสอบ (สเกล A, B, C, D, E, F, G, H, K, N, T) มอก. 2171 ล.2 2547 เลม 2 การทวนสอบและการสอบเทียบเครือ่งทดสอบ (สเกล A, B, C, D, E, F,

G, H, K, N, T) มอก. 2171 ล.3 2547 เลม 3 การสอบเทียบแทงความแข็งอางอิง (สเกล A, B, C, D, E, F, G, H, K, N, T)

มอก. 2172 2547 การทดสอบโลหะโดยการดึงที่อุณหภูมิโดยรอบ


มอก. 2173 2547 การทดสอบโลหะโดยการดัดโคง มอก. 2174 2547 การทดสอบโลหะแผนบางและแผนแถบ หนาไมเกิน 3 มิลลิเมตรโดยการดัดโคงกลับ มอก. 2175 2547 การทดสอบลวดโลหะโดยการดัดโคงกลับ มอก. 2178 2547 การตรวจวัดอัตราการเสียรูปแบบพลาสติกเนื่องจากความเครียดของโลหะแผนบางและแผนแถบ มอก. 2179 2547 การทดสอบความแข็งนูปสําหรับโลหะ มอก. 2180 2547 การวางแผนและการวิเคราะหขอมูลทางสถติิสําหรับการทดสอบความลาของโลหะ

มอก. 2181 2547 การทดสอบความลาโดยวิธีการขยายรอยแตกของโลหะ

วัสดุและอุปกรณกอสราง มอก. 80 2550 ปูนซีเมนตผสม มอก. 81 2548 ทอซีเมนตใยหนิชนิดทนความดัน มอก. 126 2548 ขอตอซีเมนตใยหินชนิดทนความดัน มอก. 178 2549 แผนไมอัด มอก. 192 2549 บานประตูแผนไมประกอบ มอก. 349 2548 เหล็กลวดคารบอนสูง มอก. 528 2548 เหล็กกลาคารบอนทรงแบนรดีรอน สําหรับงานทั่วไป และงานขึ้นรูป มอก. 737 2549 ตะแกรงเหล็กกลาเชื่อมติดเสริมคอนกรีต มอก. 1057 2549 ปูนยิปซัมผสม มอก. 1228 2549 เหล็กโครงสรางรูปพรรณขึ้นรปูเย็น มอก. 1497 2548 ชุดหัวฉีดชะลาง มอก. 2187 2547 รอยตอแนวระดับแบบทั่วไประหวางชิ้นสวนผนังคอนกรีตภายนอกสําเร็จรูปชนิดธรรมดากับ

พื้นคอนกรีต - สมบัติ คุณลักษณะ และเกณฑการจําแนกประเภท มอก. 2188 2547 รอยตอแนวดิ่งแบบทั่วไประหวางชิ้นสวนผนงัคอนกรีตภายนอกสําเร็จรูป 2 สวน ชนิดธรรมดา

- สมบัติ คุณลักษณะ และเกณฑการจําแนกประเภท มอก. 2189 2547 รอยตอรองแนวดิ่งระหวางแผนคอนกรีตเสรมิแรงขนาดใหญที่ยึดดวยคอนกรีตเสริมเหล็ก - วิธี


- ผลจากการใหโหลดในแนวดิ่งและโมเมนตสงผานจากพื้น มอก. 2226 2548 แผนผนังคอนกรีตสําเร็จรูป มอก. 2243 2548 เหล็กลวดคารบอนสําหรับงานย้ําหัวและงานทุบขึ้นรูปเย็น มอก. 2244 2548 เหล็กลวดสําหรับทําแกนลวดเชื่อมแบบพอกหุม มอก. 2256 2548 เหล็กกลาคารบอนรีดเยน็แผนมวน แผนแถบ และแผนตัด สําหรับเคลือบอิแนเมล


มอก. 2257 2549 เหล็กกลาคารบอนรีดเยน็แผนมวน แผนแถบ และแผนตัด สําหรับงานโครงสราง มอก. 2303 2549 แผนฉนวนความรอนใยแร มอก. 2314 2549 แผนผนังอะลูมิเนียม

วัสดุและอุปกรณไฟฟา มอก. 11 2549 สายไฟฟาหุมฉนวนพอลไิวนิลคลอไรด แรงดนัไฟฟาที่กําหนดไมเกิน 450/750 โวลต

มอก. 11 ล.1 2549 เลม 1 ขอกําหนดทั่วไป มอก. 11 ล. 2 2549 เลม 2 วิธีทดสอบ มอก. 11 ล.3 2549 เลม 3 สายไฟฟาไมมีเปลือกสําหรับงานติดตั้งถาวร มอก. 11 ล.4 2549 เลม 4 สายไฟฟามีเปลือกสําหรับงานติดตั้งถาวร มอก. 11 ล.5 2549 เลม 5 สายออน มอก. 11 ล.101 2549 เลม 101 สายไฟฟามีเปลือกสําหรับงานทั่วไป

มอก. 1516 2549 เครือ่งฟอกอากาศ เฉพาะดานความปลอดภัย มอก. 2235 2548 หลอดฟลอูอเรสเซนซขั้วเดี่ยว เฉพาะดานความปลอดภัย

วาลว มอก. 2194 2548 การทดสอบวาลว - ขอกําหนดการทดสอบความทนไฟ

วิธีทดสอบ มอก. 11 ล. 2 2549 สายไฟฟาหุมฉนวนพอลไิวนิลคลอไรด แรงดนัไฟฟาที่กําหนดไมเกิน 450/750 โวลต เลม 2 วิธี

ทดสอบ มอก. 2169 ล.1 2547 ความแข็งวิกเกอรสสําหรับโลหะ เลม 1 วิธีทดสอบ มอก. 2170 ล.1 2547 ความแข็งบริเนลลสําหรับโลหะ เลม 1 วิธีทดสอบ มอก. 2171 ล.1 2547 ความแข็งรอกเวลลสําหรับโลหะ เลม 1 วิธีทดสอบ (สเกล A, B, C, D, E, F, G, H, K, N, T) มอก. 2172 2547 การทดสอบโลหะโดยการดึงที่อุณหภูมิโดยรอบ มอก. 2173 2547 การทดสอบโลหะโดยการดัดโคง มอก. 2174 2547 การทดสอบโลหะแผนบางและแผนแถบ หนาไมเกิน 3 มิลลิเมตรโดยการดัดโคงกลับ มอก. 2175 2547 การทดสอบลวดโลหะโดยการดัดโคงกลับ มอก. 2176 2547 การทดสอบลวดโลหะโดยการบิด มอก. 2177 2547 การทดสอบลวดโลหะโดยการบิดกลับ มอก. 2178 2547 การตรวจวัดอัตราการเสียรูปแบบพลาสติกเนื่องจากความเครียดของโลหะแผนบางและแผนแถบ มอก. 2179 2547 การทดสอบความแข็งนูปสําหรับโลหะ มอก. 2180 2547 การวางแผนและการวิเคราะหขอมูลทางสถติิสําหรับการทดสอบความลาของโลหะ


มอก. 2181 2547 การทดสอบความลาโดยวิธีการขยายรอยแตกของโลหะ มอก. 2189 2547 รอยตอรองแนวดิ่งระหวางแผนคอนกรีตเสรมิแรงขนาดใหญที่ยึดดวยคอนกรีตเสริมเหล็ก - วิธี


- ผลจากการใหโหลดในแนวดิ่งและโมเมนตสงผานจากพื้น มอก. 2194 2548 การทดสอบวาลว - ขอกําหนดการทดสอบความทนไฟ มอก. 2195 2547 ทอเหล็กเหนียว - การทดสอบความดันน้ําภายหลังการติดต้ัง มอก. 2333 2550 ระบบการใชกาซธรรมชาติอัดเปนเชื้อเพลิงในยานยนต

มอก. 2333 ล.1 2550 เลม 1 ขอกําหนดดานความปลอดภัย มอก. 2333 ล 2 2550 เลม 2 วิธีทดสอบ

ศัพทบัญญัติ มอก. 202 ล.1 2548 ปูนไลม เลม 1 บทนิยามเกี่ยวกับปูนไลมและหินปูน มอก. 2325 ล.1 2550 ยานยนตที่ใชบนถนน-สวนควบและเครื่องอุปกรณระบบเชื้อเพลิงกาซธรรมชาติอัด เลม 1

ขอกําหนดทั่วไปและบทนิยาม มอก. 5002 2549 การมาตรฐานและกิจกรรมที่เกี่ยวของ - คําศัพททั่วไป มอก. 9000 2550 ระบบการบริหารงานคุณภาพ: หลักการพืน้ฐานและคําศัพท

สายไฟฟา มอก. 11 2549 สายไฟฟาหุมฉนวนพอลิไวนิลคลอไรด แรงดันไฟฟาที่กําหนดไมเกนิ 450/750 โวลต

มอก. 11 ล.1 2549 เลม 1 ขอกําหนดทั่วไป มอก. 11 ล. 2 2549 เลม 2 วิธีทดสอบ มอก. 11 ล.3 2549 เลม 3 สายไฟฟาไมมีเปลือกสําหรับงานติดตั้งถาวร มอก. 11 ล.4 2549 เลม 4 สายไฟฟามีเปลือกสําหรับงานติดตั้งถาวร มอก. 11 ล.5 2549 เลม 5 สายออน มอก. 11 ล.101 2549 เลม 101 สายไฟฟามีเปลือกสําหรับงานทั่วไป

เสาไฟฟา มอก. 2316 2549 เสาเหล็กกลาเคลือบสังกะสีสําหรับไฟฟาแสงสวาง

หนวยตรวจประเมิน มอก. 17021 2550 การตรวจสอบและรับรองขอกําหนดสําหรับหนวยตรวจประเมินและใหการรับรองระบบการ

จัดการ



หนวยรับรอง - ระบบคุณภาพ มอก. 17040 2549 การตรวจสอบและรับรอง - ขอกําหนดทัว่ไปวาดวยการประเมินเพือ่การยอมรับรวมของหนวย

ตรวจสอบและรับรองและหนวยรับรองระบบงาน

หนวยรับรองระบบงาน มอก. 17040 2549 การตรวจสอบและรับรอง - ขอกําหนดทัว่ไปวาดวยการประเมินเพือ่การยอมรับรวมของหนวย

ตรวจสอบและรับรองและหนวยรับรองระบบงาน

หลอดฟลูออเรสเซนต มอก. 2235 2548 หลอดฟลอูอเรสเซนซขั้วเดี่ยว เฉพาะดานความปลอดภัย

หวี มอก. 1985 2549 เครือ่งใชไฟฟาสําหรับการดูแลผิวหรอืผม เฉพาะดานความปลอดภัย

หองน้ํา - อุปกรณ มอก. 1497 2548 ชุดหัวฉีดชะลาง

หินปูน มอก. 202 ล.1 2548 ปูนไลม เลม 1 บทนิยามเกี่ยวกับปูนไลมและหินปูน

หินปูน - ศัพทบัญญัติ มอก. 202 ล.1 2548 ปูนไลม เลม 1 บทนิยามเกี่ยวกับปูนไลมและหินปูน

เหล็ก มอก. 1228 2549 เหล็กโครงสรางรูปพรรณขึน้รูปเย็น

เหล็กกลา มอก. 528 2548 เหล็กกลาคารบอนทรงแบนรีดรอน สําหรบังานทั่วไป และงานขึ้นรูป มอก. 2257 2549 เหล็กกลาคารบอนรีดเยน็แผนมวน แผนแถบ และแผนตัด สําหรับงานโครงสราง

เหล็กกลา - ทอ มอก. 2191 2547 ทอเหล็กกลา - ระบบคาความคลาดเคลื่อน มอก. 2192 2547 ทอเหล็กกลา - การเตรียมปลายทอและอุปกรณประกอบสําหรับการเชื่อม


มอก. 2193 2547 ทอเหล็กกลา - การทําเครื่องหมายอักขระแบบตอเนื่องและการใหรหัสสสีําหรับการชี้บงวัตถุดิบ

เหล็กแผน มอก. 528 2548 เหล็กกลาคารบอนทรงแบนรดีรอน สําหรับงานทั่วไป และงานขึ้นรูป มอก. 2257 2549 เหล็กกลาคารบอนรีดเยน็แผนมวน แผนแถบ และแผนตัด สําหรับงานโครงสราง

เหล็กลวด มอก. 349 2548 เหล็กลวดคารบอนสูง มอก. 2243 2548 เหล็กลวดคารบอนสําหรับงานย้ําหัวและงานทุบขึ้นรูปเย็น มอก. 2244 2548 เหล็กลวดสําหรับทําแกนลวดเชื่อมแบบพอกหุม มอก. 2256 2548 เหล็กกลาคารบอนรีดเยน็แผนมวน แผนแถบ และแผนตัด สําหรับเคลือบอิแนเมล

อุปกรณเสริมสวย มอก. 1985 2549 เครือ่งใชไฟฟาสําหรับการดูแลผิวหรอืผม เฉพาะดานความปลอดภัย


Alphabetical Subject Index

Subject Page

Aerial equipment 1 Agricultural tractors 1 Air pollution 1 Alloys 1 Aluminium 1 Aluminium alloys 2 Aluminium ores 2 Aluminium oxide 2 Aluminium powder 2 Aluminium products 3 Ammonium inorganic compounds 3 Animal fats 3 Animal oils 3 Anodes 3 Arc-welding equipment 3 Asbestos cement 4 Asphalts 4 Atmospheric corrosion 4 Atmospheric corrosion - Alloys 4 Atmospheric corrosion - Anodic coating 5 Atmospheric corrosion - Metals 5 Atmospheric pressure 5 Automatic control systems 5 Bar (materials) - Steels 5 Bars (materials) 5 Biological analysis and testing 5 Biological indicators 6


Subject Page

Biotechnology 6 Blocks 6 Board (paper) 6 Boilers - Codes 6 Boilers - Materials specification 7 Boilers - Testing 7 Building codes 7 Building materials 7 Buildings 7 Buried pipes 7 Burners 7 Cable sheaths 8 Cables junctions 8 Calibration 8 Camping equipment 8 Carbon black 8 Cathodes 8 Cathodic protection 9 Ceramics 9 Chain saws 9 Chains 9 Chainwheels 9 Chemical analysis 10 Chemical composition 10 Chemical engineering 10 Chemical indicators 10 Chemical industry 10 Chemical laboratories 11 Chimneys 11


Subject Page

Clamped pipe connections 11 Clamping flanges - Electric conductors 12 Clay 12 Cold rolled products 12 Combustion products 12 Concrete vibrators 12 Concretes 12 Condensers 12 Conduits (hydraulic) 13 Conformity assessment 13 Construction 13 Construction systems parts 13 Contraceptive sheaths 13 Conveyor belts 13 Copper 14 Copper alloys 14 Corrosion 14 Corrosion protection 14 Cranes 14 Cross-linked materials 15 Cross-linking (chemical) 15 Crosslinked materials 15 Cylindrical shape 15 Dangerous materials 16 Definitions 16 Dental equipment 17 Dentistry 17 Design 17 Dielectric devices 17


Subject Page

Dimensional measurement 17 Dimensional tolerances 18 Disinfectants 18 Displacement meters 18 Distribution systems 18 Drilling machines 18 Drilling (mineral extraction) 19 Drying 19 Earth-moving equipment 19 Elastomers 19 Electric cables 19 Electric power system disturbances 20 Electrical – Equipment 20 Electrical household appliances 20 Electrical installations 22 Electrical insulation 24 Electrical insulation devices 24 Electrical safety 24 Electrical Safety codes 24 Electrolytic capacitors - Aluminium 24 Electromagnetic radiation 24 Electronic equipment and components 25 Electronics - Dictionaries 25 Elevators (conveyors) 25 Engineering 25 Engineering drawings 26 Environmental engineering 26 Environmental management 26 Ergonomics 26


Subject Page

Escalators Safety requirements 26 Expansion joints 27 Extraction methods of analysis 27 Eyebolts 27 Fabric testing 27 Fans 27 Fasteners 27 Fire alarms 28 Fire protection 28 Fire safety 28 Fire - Safety codes 28 Fire safety in buildings - Codes 29 Fire tests 29 Fittings 29 Fittings - Pipes 29 Fixtures 29 Flammable materials 30 Flexible pipes 30 Flow measurement 30 Flowmeters 30 Flues 30 Fluid pressure 31 Fly ash 31 Food products 31 Footwear 31 Forestry equipment 32 Forgings 32 Fruits 32 Fuel systems - Vehicles 32


Subject Page

Furniture 32 Gas cylinders 33 Geosynthetics 33 Geotextiles 33 Grinding machines 33 Hand-held tools 33 Health and safety requirements 34 Health services 34 Heat exchangers 34 Heat-resistance materials 35 Heating equipment 35 Hedge trimmers 35 Hot rolled products 35 Hot-rolled steels 35 Human body - Vibration measurement 36 Hydraulically-operated devices - Jacks 36 Hygiene 36 Identity cards 36 Identity cards - Magnetic stripes 37 Identity cards - Testing 37 Impact testing 37 Industrial air pollutants 37 Industrial engineering 38 Industrial machines 38 Information 38 Insulated cables 38 International identification numbers 39 International standard serial numbering 39 Ionizing radiation 39


Subject Page

Iron 39 Iron - Atomic absorption spectrophotometry 39 Laboratories - Calibration 40 Lead 40 Leather 40 Life safety 40 Lift - Safety measures 40 Lifting 41 Lighting equipment 41 Liquefied petroleum gas - Vehicles 41 Low-voltage equipment 41 Low-voltage installations 43 Lubricating oils - Filtration 44 Machine tools 44 Management techniques 44 Mandrels 45 Manufacturing 45 Marine navigation 45 Marking 45 Mechanical engineering 45 Mechanical shock 45 Medical equipment 46 Metals 46 Microwave ovens 46 Milk 47 Mineral Resources 47 Mining 47 Molybdenum inorganic compounds 47 Natural gas 47


Subject Page

Nickel 47 Nickel alloys 48 Non-destructive testing 48 Optical instruments 48 Optics 48 Orders (sales documents) 48 Oscillators 49 Overhead line conductors 49 Overhead power lines 49 Packaging 50 Packing 50 Performance testing 50 Personal protective equipment 50 Petroleum 50 Petroleum products 51 Pin insulators 51 Pipe coatings - Steels 51 Pipe connections 52 Pipe fittings 52 Pipe fittings - Coatings 52 Pipelines 52 Pipes 52 Pipework systems 53 Piping 53 Plants 53 Plastic pipes 53 Plastics 54 Plastics hoses 54 Plates 54


Subject Page

Polyethylene - Pipes 54 Polyvinyl chloride - Pipes 55 Potable water 55 Powered devices 55 Precision 55 Preferred numbers 55 Pressure pipes 56 Prestressed concrete 56 Protective clothing 56 Pulleys 57 Quantity 57 Radar 57 Radar equipment 57 Radiation measurement 57 Railroad equipment 58 Rails 58 Railway engineering 58 Refractories 58 Reinforced concrete 58 Reinforced materials 58 Reinforced plastics 59 Remote control systems 59 Rescue equipment 59 Restraint systems (protective) 59 Rivets 60 Road safety 60 Road transport 60 Road vehicle engineering 60 Road vehicles 60


Subject Page

Road vehicles components 61 Road vehicles - Electric cables 61 Road vehicles - Electrically-operated devices 62 Rubber hoses 62 Rubber industry 62 Safety devices 62 Safety measures 62 Sampling methods 63 Sanders 63 Saws 63 Seat belt anchorages 64 Sensory analysis (food) 64 Sewing machinery 64 Shackles 64 Shear testing 64 Sheathed cables 64 Sheet materials 65 Shipbuilding 65 Ships 65 Sockets (ropes) 65 Soils 66 Soils - Quality 66 Solar-powered devices 66 Solid fuels 66 Spaced 67 Spectrometric method 67 Spinning machinery 67 Sprinkler systems 67 Steel converters 67


Subject Page

Steel products 68 Steel strips 68 Steels 68 Sterile equipment 68 Sterilization (hygiene) 68 Strips 69 Structural concrete 69 Sulphur 69 Support stands - Vehicles 70 Surface-roughness measurement 70 Surface texture 70 Surface treatment 70 Suspended ceilings 70 Switchgear - Control devices 70 Tachographs 70 Tankers 71 Tankers - Dangerous materials 71 Tanks (containers) 71 Tanks (containers) - Steels 72 Technical documents 72 Telecommunication systems 72 Testing 72 Textile machinery and accessories 72 Textile testing 73 Textiles 73 Thermal environment systems 73 Thermoplastic polymers 74 Thermoplastic polymers - Pipelines 74 Thermoplastic rubber 74


Subject Page

Thermosetting materials 74 Threads 75 Time 75 Tissue paper 75 Titanium alloys 75 Titanium ores 76 Tools 76 Transportation 76 Trolleys 76 Tubes 76 Ultrasonic testing 76 Underground electric power distribution 76 Underground structures 77 Units of measurement 77 Valves 77 Vegetable fats 77 Vegetable oils 77 Vegetables 77 Ventilation 78 Vibration effects (human body) 78 Vocabulary 78 Volumetric analysis 78 Vulcanized rubber 78 Washing 79 Water-absorption tests 79 Water heaters 79 Water pipes 79 Water - Quality 79 Water storage 80


Subject Page

Water supply 80 Water supply meters 80 Water treatment 81 Waterworks 81 Welded joints 81 Welding equipment 81 Wires 82 Wood 82 Wood preservatives 82 Wrought alloys 82 Yield stress 82 Zinc 82


ดรรชนีหัวเร่ือง

หัวเรื่อง หนา

การตรวจประเมิน 83

การมาตรฐาน 83

การมาตรฐาน - ศัพทบัญญัติ 83

การรับรองตนเอง 83

การรับรองผลติภัณฑ 83

การรับรองระบบงาน 83

ความปลอดภัย 84

คอนกรีต 84

เครื่องใชไฟฟาในบาน 84

เครื่องดัดผม 84

เครื่องเปาผม 84

เครื่องเปามือ 84

เครื่องฟอกอากาศ 85

เครื่องมวนผม 85

เครื่องมอืทดสอบ 85

เครื่องสุขภัณฑ - อุปกรณ 85

เครื่องหมายและสัญลักษณ 85

เครื่องอบผิวหนา 85

ฉนวนกนัความรอน 85

ชุดหัวฉีด 85

ตะแกรง 85

ทอ 85

ทอ - ขอตอ 86


หนา หัวเรื่อง

ทอ - อุปกรณ 86

ประตู 86

ปูนซีเมนต 86

ปูนยิปซัม 86

ปูนไลม 86

ปูนไลม - ศัพทบัญญัติ 86

ผูประกอบการ - ขอกําหนด 86

แผนผนัง 87

แผนไม 87

แผนใยแร 87

มอเตอร 87

ยานยนต - ชิ้นสวน 87

ยานยนต - ระบบเชื้อเพลิง 88

ยานยนต - ศัพทบัญญัติ 88

รถยนต - ชิ้นสวน 89

รถยนต - ระบบเชื้อเพลิง 89

รถยนต - ศัพทบัญญัติ 90

ระบบคุณภาพ 90

ระบบคุณภาพ - ศัพทบัญญัติ 91

ระบบบริหารงานคุณภาพ 91

ระบบบริหารงานคุณภาพ - ศัพทบัญญัติ 91

ลวด 91

โลหะ 91

วัสดุและอุปกรณกอสราง 92

วัสดุและอุปกรณไฟฟา 93

วาลว 93


หนา หัวเรื่อง

วิธีทดสอบ 93

ศัพทบัญญัติ 94

สายไฟฟา 94

เสาไฟฟา 94

หนวยตรวจประเมิน 94

หนวยรับรอง - ระบบคุณภาพ 95

หนวยรับรองระบบงาน 95

หลอดฟลูออเรสเซนต 95

หวี 95

หองน้ํา - อุปกรณ 95

หินปูน 95

หินปูน - ศัพทบัญญัติ 95

เหล็ก 95

เหล็กกลา 95

เหล็กกลา - ทอ 95

เหล็กแผน 96

เหล็กลวด 96

อุปกรณเสริมสวย 96


Documents

AERIAL EQUIPMENT SFS AGRICULTURAL TRACTORS CSBTS AIR POLLUTION ISO ALLOYS …library.tisi.go.th/downloadable/new_release/24_oct-dec5… · · 2008-01-25ALLOYS SAE International