ADDENDUM NO. 1 · IVC Defects, PAC South Orange Community College District - BID No. 346 Addendum No. 1 May 4, 2018 Page 2 of 3 1-1 Revisions to Plan Sheets: 1-1.1 Revision to Plan

Page 1 of 3

ADDENDUM NO. 1

Date: May 4, 2018

for

IVC Defects, PAC Irvine Valley College - BID No. 346

South Orange County Community College District

General-All project documents including contract documents, drawings, and specifications, shall remain unchanged with the exception of those elements added, revised, deleted, or clarified by this addendum.

CONTENTS

ADDENDUM ITEMS

INDEX PAGE 1 ITEMS:

1-1 Revisions to Plan Sheets PAGE 2

1-2 Questions and Answers PAGE 2

1-3 Attachments PAGE 3

IVC Defects, PAC South Orange Community College District - BID No. 346 Addendum No. 1 May 4, 2018

Page 2 of 3

1-1 Revisions to Plan Sheets:

1-1.1 Revision to Plan Sheet A1.0 (DSA A# 04-117017): For revisions related to this Addendum No. 1, refer to Delta 1 indicated on the attached Plan Sheet A1.0.





1-1.6 Revision to Plan Sheet M0.1 (DSA A# 04-117017): For revisions related to this Addendum No. 1, refer to Delta 1 indicated on the attached Plan Sheet M0.1.


1-2 Questions and Answers:

Q1: The specs for the carpet seem to call out 3 different types of manufacturer, but not

an actual product. The finish schedule on A4.0 doesn’t call out for a particular carpet product. Is there a particular carpet product that you would like to have installed? The specs also show requirements for carpet over padding, yet Detail 1 on A5.0 and other sections of the specs call out for carpet tile installed on the concrete floor. Please clarify which is correct?

A1: Specification Section 09 68 00 has been revised and is attached hereto.

1-3 Attachments:

IVC Defects, PAC South Orange Community College District - BID No. 346 Addendum No. 1 May 4, 2018

Page 3 of 3

1-3.1 Revised Plan Sheet A1.0 (DSA A# 04-117017)





1-3.6 Revised Plan Sheet M0.1 (DSA A# 04-117017)


End of Addendum No. 1

6'-8

" T

YP

.7

"1

' - 6

"

16 GA. GALV. STL. SIGN PAINTED

OSHA BLUE INCL. FASTENERS

9 1/2" HIGH ISA SYMBOL AND

2 1/4" HIGH "VAN ACCESSIBLE"

PAINTED W/ WHITE REFLECTORIZED

PAINT

1" R., TYP.

1/2" WIDE BORDER PAINTED W/ WHITE

REFLECTORIZED PAINT

FINISH GRADE OR SLAB, REF. PLAN

EXISTING FOOTING


WHITE INCL. FASTENERS

TEXT: "MINIMUM FINE OF $250.00"

FONT: ARIAL, BLACK

SIZE: 1"

MINIMUM FINE

OF $250.00

2% MAX IN P.O.T.

UNAUTHORIZED VEHICLES

PARKED IN DESIGNATED

SPACES NOT DISPLAYING

DISTINGUISHING PLACARDS OR

SPECIAL LICENSE PLATES

ISSUED FOR PERSONS WITH

DISABILITIES WILL BE TOWED

AWAY AT THE OWNER'S

EXPENSE. TOWED VEHICLES

MAY BE RECLAIMED BY

CONTACTING THE COSTA MESA

POLICE DEPARTMENT:

99 FAIR DRIVE

COSTA MESA, CA 92626

PH. 714-754-5252."

2' - 0

"

MIN

. W

HE

RE

L

OC

AT

ED

IN

W

AL

KIN

G P

AT

H

6' - 8

"1

' - 1

0"

4"

3"



TEXT:

"UNAUTHORIZED VEHICLES

PARKED IN DESIGNATED SPACES

NOT DISPLAYING

DISTINGUISHING PLACARDS OR

SPECIAL LICENSE PLATES

ISSUED FOR PERSONS WITH

DISABILITIES WILL BE TOWED

AWAY AT THE OWNER'S

EXPENSE. TOWED VEHICLES

MAY BE RECLAIMED BY

CONTACTING THE EL MONTE

POLICE DEPARTMENT AT:

(CONTACT INFORMATION TO BE

PROVIDED)

1" HIGH BLACK LETTERS

FONT: SANS SERIF

1" RAD., TYP.


2" x 2" GALV. TUBE STEEL POST

12" DIA. CONC. FOOTING

1' - 5"

NOTE: TOW AWAY SIGNAGE PER CBC 1109A.8.8.1

2% MAX IN P.O.T.

PARKING

ONLY

6'-8" T

YP

.7"

1' - 6"


OSHA BLUE INCL. FASTENERS

9 1/2" HIGH ISA SYMBOL AND 2 1/4"

HIGH "PARKING ONLY" PAINTED W/

WHITE REFLECTORIZED PAINT

1" R., TYP.

1/2" WIDE BORDER PAINTED W/ WHITE

REFLECTORIZED PAINT


1' - 0"



TEXT: "MINIMUM FINE OF $250.00"

FONT: ARIAL, BLACK

SIZE: 1"

MINIMUM FINE

OF $250.00

2% MAX. IN P.O.T.

EXISTING FOOTING

11"

72"

74" 11"

36"

48"

82"11"

74" 12"

36"

48

"

(E) CURB RAMP WITH TRUNCATED

12" WIDE SAWCUT GROOVED JOINTS

AT TOP OF RAMP PER ADA REQUIREMENTS

IDENTIFICATION STAMP

DIVISION OF THE STATE ARCHITECT

OFFICE OF REGULATION SERVICES

AC FLS SS

DATE

SCALE:

SHEET TITLE:

A#

SHEET NUMBER:

PROJECT NO:

DATE ISSUED:

REVISIONS:

OW

NE

R:

PR

OJE

CT

N

AM

E:

CL

IE

NT

A

DD

RE

SS

:

IR

VIN

E V

AL

LE

Y C

OL

LE

GE

PE

RF

OR

MIN

G A

RT

S C

EN

TE

R

SC

EN

E S

HO

P R

EN

OV

AT

IO

NS

55

00

IR

VIN

E V

AL

LE

Y D

RIV

E,

IR

VIN

E, C

A 9

26

18

DESCRIPTION DATE

JAN 31, 2019

2017-40146

03/06/2018

04-117017

A1.0

SITE PLAN AND

ACCESSIBLE

PATH OF TRAVEL

1/128" = 1'-0"

1CAMPUS SITE PLAN1/16" = 1'-0"

2ACCESSIBLE PATH OF TRAVEL

3

-

4

-

1/128" = 1'-0"

3EXISTING ACCESSIBLE PARKING

1/4" = 1'-0"

4EXISTING CURB CUT

1/2" = 1'-0"

5ACCESSIBLE PARKING SIGNAGE

EXISTING SIGNAGE EXISTING SIGNAGE NEW SIGNAGE

NEW SIGNAGENEW SIGNAGE

(A)

(B)

(C)

9

GEN-3

TYP.

9

GEN-3

TYP.

9

GEN-3

TYP.

6" = 1'-0"

EXISTING CURB CUT GROOVE DETAIL

4

-

1 1

1 ADDENDUM 1 05.04.18

J:\2017\2017-40146 Irvine Valley College PAC Defects\Drawings\Construction Documents\CAD\IVC-SCENESHOP-CD SET.dwg, 5/3/2018 12:52:10 PM, ARCH full bleed E1 (30.00 x 42.00 Inches)

PH

PH

PH PH

3'-0

"

3'-0"

6'-0"

60

" T

YP

.

72" TYP.




AC FLS SS

DATE

SCALE:

SHEET TITLE:

A#

SHEET NUMBER:

PROJECT NO:

DATE ISSUED:

REVISIONS:

OW

NE

R:

PR

OJE

CT

N

AM

E:

CL

IE

NT

A

DD

RE

SS

:

IR

VIN

E V

AL

LE

Y C

OL

LE

GE

PE

RF

OR

MIN

G A

RT

S C

EN

TE

R

SC

EN

E S

HO

P R

EN

OV

AT

IO

NS

55

00

IR

VIN

E V

AL

LE

Y D

RIV

E,

IR

VIN

E, C

A 9

26

18

DESCRIPTION DATE

JAN 31, 2019

2017-40146

03/06/2018

04-117017

A2.1

FLOOR PLAN &

REFLECTIVE

CEILING PLAN

3/16" = 1'-0"

2 PARTIAL ENLARGED REFLECTIVE CEILING PLAN

3/16" = 1'-0"

1 PARTIAL ENLARGED FLOOR PLAN

4

A-5.0

3

A-5.0

1

A-4.0

1

A-4.0

1

1 ADDENDUM 1 05.04.18


dhawkins

Text Box

IN AFFECTED AREAS

dhawkins

Cloud

dhawkins

Snapshot

24

"

60" MIN.

24

"

60" MIN.

60

" M

IN

.

60

" M

IN

.

19"

7'-1 1/4"

7'-1

1 1

/4

"

31"




AC FLS SS

DATE

SCALE:

SHEET TITLE:

A#

SHEET NUMBER:

PROJECT NO:

DATE ISSUED:

REVISIONS:

OW

NE

R:

PR

OJE

CT

N

AM

E:

CL

IE

NT

A

DD

RE

SS

:

IR

VIN

E V

AL

LE

Y C

OL

LE

GE

PE

RF

OR

MIN

G A

RT

S C

EN

TE

R

SC

EN

E S

HO

P R

EN

OV

AT

IO

NS

55

00

IR

VIN

E V

AL

LE

Y D

RIV

E,

IR

VIN

E, C

A 9

26

18

DESCRIPTION DATE

JAN 31, 2019

2017-40146

03/06/2018

04-117017

A4.1

ENLARGED

RESTROOM

PLANS

1/4" = 1'-0"

1ENLARGED RESTROOM PLAN

1/4" = 1'-0"

2ENLARGED RENOVATED RESTROOM PLAN

1/4" = 1'-0"

3ENLARGED DEMO RESTROOM PLAN

1/2" = 1'-0"

5ENLARGED INTERIOR RESTROOM 128 ELEVATIONS

4

5

6

7

1/4" = 1'-0"

4EXISTING TOILET STALL ACCESSORIES

TOILET PAPER DISPENSER MEN'S RESTROOM ROOM 151 A

TOILET PAPER DISPENSER RESTROOM ROOM 127 B


dhawkins

Cloud

dhawkins

Snapshot

dhawkins

Cloud

dhawkins

Snapshot

dhawkins

Text Box

REMOVE AND REPLACE ALL EXISTING URINAL PARTITIONS AND FLOOR AND CEILING MOUNTED TOILET STALL PARTITIONS IN MENS RESTROOM PER SPECIFICATIONS

dhawkins

Text Box

dhawkins

Cloud

dhawkins

Snapshot

dhawkins

Text Box

CHICAGO FAUCETS, Model #: EQ-C13A-13ABCP

dhawkins

Text Box

dhawkins

Snapshot

dhawkins

Cloud

M0.1

LEGEND,SCHEDULES& NOTES




AC FLS SS

DATE

THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO SVA

ARCHITECTS INC. AND IS FURNISHED IN CONFIDENCE FOR THE LIMITED

PURPOSE OF EVALUATION, BIDDING OR REVIEW. THIS DOCUMENT OR ITS

CONTENTS MAY NOT BE USED FOR ANY OTHER PURPOSE AND MAY NOT BE

REPRODUCED OR DISCLOSED TO OTHERS WITHOUT THE PRIOR WRITTEN

CONSENT OF SVA ARCHITECTS INC. ALL RIGHTS RESERVED, © COPYRIGHT2017.

SCALE:

SHEET TITLE:

A#

3 MACARTHUR PLACE, SUITE 850 SANTA ANA, CA 92707

T 949.809.3380 WWW.SVA-ARCHITECTS.COM

SHEET NUMBER:

PROJECT NO:

DATE ISSUED:

REVISIONS:

OW

NER

:

PRO

JEC

T N

AM

E:

CLI

ENT

AD

DR

ESS:

IRVI

NE

VALL

EY C

OLL

EGE

PER

FOR

MIN

G A

RTS

CEN

TER

SCEN

E SH

OP

REN

OVA

TIO

NS

5500

IRVI

NE

VALL

EY D

RIV

E,IR

VIN

E, C

A 9

2618

DESCRIPTION DATE

2017-40146

04/17/2018

40-117017

5/04/2018ADDENDUM 011

1

A3.0

1

A3.1

2

A3.1

3

A3.1

A4.0

1

2

3

4

A4.0 5

A4.07 8

6

2.3 3 3.3 3.4 3.6 4 4.4 4.6 4.7 5 5.5 6 6.36.4

A

A.2

B

C

C.2

C.4

C.6

D

D.5

ADD NEW ACOUSTIC GROOVED WOOD CEILING STRUCCTURE TO EXISTING GYP. CEILING WHICH IS TO REMAIN

EXISTING CEILING TO REMAIN

EXISTING CONTINUOUS SUPPLY AIR DIFFUSER TO REMAIN

EXISTING LIGHTING SYSTEM, TYP.

EXISTING RECESSED CAN LIGHTS, TYP.

102

102

102

104

104

ALL EXISTING SPRINKLER HEADS TO BE DROPPED PRIOR TO INSTALLING NEW ACOUSTIC CEILING SYSTEM, TYP.

101TYPICAL

1

1

A3.0

OPEN TO ABOVE

1

A3.1

2

A3.1

3

A3.1

A4.0

1

2

3

4

A4.0 5

A4.07 8

6

2.3 3 3.3 3.4 3.6 4 4.4 4.6 4.7 5 5.5 6 6.3 6.4

A

A.2

B

C

C.2

C.4

C.6

D

D.5

EXISTING CEILING

REFER TO PLAN 2/ -FOR RCP ABOVE

EXISTING RECESSED CAN LIGHTS, TYP.

+15'-0"AFF

102

102

102

9' - 0"

104

104

101

TYPICAL1

IDENTIFICATION STAMPDIVISION OF THE STATE ARCHITECTOFFICE OF REGULATION SERVICES

AC FLS SS

DATE

THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO SVA ARCHITECTS INC. AND IS FURNISHED IN CONFIDENCE FOR THE LIMITED PURPOSE OF EVALUATION, BIDDING OR REVIEW. THIS DOCUMENT OR ITS CONTENTS MAY NOT BE USED FOR ANY OTHER PURPOSE AND MAY NOT BE REPRODUCED OR DISCLOSED TO OTHERS WITHOUT THE PRIOR WRITTEN CONSENT OF SVA ARCHITECTS INC. ALL RIGHTS RESERVED, © COPYRIGHT 2017.

SCALE:

SHEET TITLE:

A# 04-117018



SHEET NUMBER:

PROJECT NO:

DATE ISSUED:

REVISIONS:

OW

NE

R:

PR

OJE

CT

NA

ME

:

CL

IEN

T A

DD

RE

SS

:

JAN. 31, 2019

1/8" = 1'-0"

04-117018

A2.1

REFLECTEDCEILING PLANS

04/16/2018

IRV

INE

VA

LL

EY

CO

LL

EG

E

IVC

PA

C L

OB

BY

AC

OU

ST

ICIM

PR

OV

EM

EN

TS

5500 IR

VIN

E V

AL

LE

Y D

RIV

E, IR

VIN

E, C

A 92618

1/8" = 1'-0" 2SECOND FLOOR REFLECTED CEILING PLAN

1/8" = 1'-0" 1FIRST FLOOR REFLECTED CEILING PLAN

GENERAL NOTES:

1. ACOUSTIC MITIGATION DESIGN INCLUDES:

RT DESIGN TARGET (GOAL) = MAXIMUM 2.0 SECONDS.

101 INSTALL ACOUSTIC PANELS TO BE SUSPENDED FROMEXISTING CEILING STRUCTURE ABOVE PER PLANS. EXISTINGFIRE SPRINKLER HEADS TO BE DROPPED AT ALL AFFECTEDLOCATIONS TO UNDERSIDE OF ACOUSTIC PANELS PER DET.4/A5.0

102 INSTALL ACOUSTICAL GROOVED WOOD WALL PANELS TO THELOBBY WALL PER PLAN.

104 INSTALL ACOUSTICAL CLOUDS, ANCHORED TO THE EXISTINGCEILING STRUCTURE ABOVE

KEYNOTES:

DESCRIPTION DATE

1 ADDENDUM 1 04/30/2018

FIRST FLOOR0"

SECOND FLOOR16' - 0"

T.O. SLAB29' - 0"

T.O. PARAPET49' - 6"

1

A3.13.3 3.4 3.6 4 4.4 4.6 4.7

LOBBY

1

101

EXISTING CEILING STRUCTURE

FIRST FLOOR0"


T.O. SLAB29' - 0"


2

A3.1

A A.2 B

LOBBY

1

BALCONYLOBBY

6

ACOUSTIC WALL PANELS, MOUNTED TO (E) PANELS, TYP.

10

' - 0

"1

' - 1

"8

' - 0

"

TO

E K

ICK

6"

MIN

.

ACOUSTIC WALL PANELS, MOUNTED TO (E) PANELS, TYP.7

' - 7

".

EXISTING CEILING SYSTEM

102

102

103

101

104

FIRST FLOOR0"


T.O. SLAB29' - 0"


1

A3.1

3.33.43.644.44.64.7

LOBBY

1

EXISTING CEILING SYSTEM TO REMAIN

ACOUSTIC WALL PANEL, MOUNTED TO (E) PANELS, TYP.

12

" M

IN.

10

' - 0

"

6"

8' -

0"

ACOUSTIC WALL PANEL, MOUNTED TO (E) PANELS, TYP.

69' - 11"

102

102

102

101

102

104

105105

107 106 106 106 107 106105105

106

(N) MONITOR PROVIDED BY OWNER


SIM.

107 107


106

106106

106

107

1071

1

1

FIRST FLOOR0"


T.O. SLAB29' - 0"


2

A3.1

AA.2B

LOBBY

1

BALCONYLOBBY

6


EXISTING ROOF SYSTEM

102

102

103

101

FIRST FLOOR0"


T.O. SLAB29' - 0"


2

A3.1

3

A3.1

A A.2 B C C.2

LOBBY

1

LOBBYEAST

3

101

EXISTING CEILING STRUCTURE

FIRST FLOOR0"


T.O. SLAB29' - 0"


2

A3.1

3

A3.1

AA.2BCC.2

LOBBY

1




TO

E K

ICK

6"

MIN

.8

' - 0

"

10

' - 0

"1

2"

MIN

.

BALCONY LOBBY

102

102

104

101

103

108109

107

108

109

1

1

110

FIRST FLOOR0"


T.O. SLAB29' - 0"

2

A3.1

3

A3.1

AA.2BCC.2

LOBBY

1

LOBBYWEST

2

101

FIRST FLOOR0"


T.O. SLAB29' - 0"


2

A3.1

3

A3.1

A A.2 B C C.2

LOBBYWEST

2

LOBBY

1

7'-7

".


102

102

TO

E K

ICK

6"

MIN

.

8' -

0"

10

' - 1

"

10

' - 1

"1

' - 0

"

102

103

104

101

ITEM ACOUSTIC MATERIAL REMARKS NRC DETAIL

101 ACOUSTIC GROOVED WOOD PANELS G-16 (WALNUT) BY MURANO ACOUSTICS

PROVIDE 4" AIR GAP BETWEEN (E) CIELING AND 2" FIBERGLASS ACOUSTIC PANEL BEHIND WOOD GROOVED PANEL

1.7 4/A5.0

102 ACOUSTIC GROOVED WOOD PANELS G-16 (WALNUT) BY MURANO ACOUSTICS 1.7 5-6/A5.0

1030.3 1/A5.0

104 ACOUSTIC CLOUDS BY ACOUSTICLOUD, 2" MIN THICK, FABRIC WRAPPED

INSTALL ACOUSTIC CLOUD (APPROX. 48"X72" U.N.O.) IN STRATEGIC LOCATIONS PER PLAN TO AVOID OBSTRUCTING LIGHTS OR FIRE SPRINKLERS

1.0 3/A5.0

GLUE DOWN CARPET TILES AND CARPET BASE

INSTALL GROOVED WOOD PANELS OVER 2" ACOUSTIC FIBERGLASS PANELS SECRUED TO (E) WALL FRAMING

APPROX. WEIGHT: 4 PSF


FLAME SPREAD: 20 CLASS A CERTIFICATIONSMOKE DEVELOPED: 20 CLASS A CERTIFICATION

FLAME SPREAD: 20 CLASS A CERTIFICATIONSMOKE DEVELOPED: 20 CLASS A CERTIFICATION

1

1



AC FLS SS

DATE


SCALE:

SHEET TITLE:

A# 04-117018



SHEET NUMBER:

PROJECT NO:

DATE ISSUED:

REVISIONS:

OW

NE

R:

PR

OJE

CT

NA

ME

:

CL

IEN

T A

DD

RE

SS

:

JAN. 31, 2019

As indicated

04-117018

A4.0

INTERIORELEVATIONS,SCHEDULES

04/16/2018

IRV

INE

VA

LL

EY

CO

LL

EG

E

IVC

PA

C L

OB

BY

AC

OU

ST

ICIM

PR

OV

EM

EN

TS

5500 IR

VIN

E V

AL

LE

Y D

RIV

E, IR

VIN

E, C

A 92618

1/8" = 1'-0" 1LOBBY INT. ELEVATION 1








GENERAL NOTES:

1. ACOUSTIC MITIGATION DESIGN INCLUDES:

RT DESIGN TARGET (GOAL) = MAXIMUM 2.0 SECONDS.

101 INSTALL ACOUSTIC PANELS TO BE SUSPENDED FROMEXISTING CEILING STRUCTURE ABOVE PER PLANS. EXISTINGFIRE SPRINKLER HEADS TO BE DROPPED AT ALL AFFECTEDLOCATIONS TO UNDERSIDE OF ACOUSTIC PANELS PER DET.4/A5.0

102 INSTALL ACOUSTICAL GROOVED WOOD WALL PANELS TO THELOBBY WALL PER PLAN.

103 INSTALL CARPET TILES TO THE BALCONY FLOOR (2ND FLOORLEVEL) AS INDICATED, MIN NRC 0.3, APPROXIMATELY 1,110 SF.

104 INSTALL ACOUSTICAL CLOUDS, ANCHORED TO THE EXISTINGCEILING STRUCTURE ABOVE

105 (E) OUTLETS TO BE MOVED UP TO +72" AFF BEHIND (N)MONITOR PROVIDED BY OWNER, TYP. AT EACH END. SEEDETAIL 10/A5.0(SIM)

106 (E) OUTLETS TO BE REINSTALLED FLUSH WITH (N) ACOUSTICPANEL FINISH SURFACE PER DETAIL 10/A5.0, TYP. ALL OUTLETSIN LOCATIONS AFFECTED BY (N) ACOUSTIC PANELS, TYP. BOTHLEVELS

107 BOX OUT AROUND (E) FIRE ALARM PULL STATION PER DETAIL7/A5.0. INSTALL 4"X6" RED MTL SIGN WITH "FIRE ALARM PULLSTATION" ON FACE OF PANELS.

108 REMOVE AND REINSTALL ROOM SIGNAGE ON FACE OF (N)ACOUSTIC WOOD PANELS. HEIGHT SHALL BE PER DETAIL11/5EN-3.

109 BOX OUT AROUND (E) FIRE EXTINGUISHER CABINET PER DET.11/A5.0, TYP.

110 REMOVE AND REINSTALL (E) LIFE SLIDER UNIT ON FACE OFNEW ACOUSTIC WALL PANELS AT THE SAME HEIGHT ASCURRENTLY INSTALLED. SECURE SLIDER UNIT TO NEW WDBLOCKING WITH (2) #10 WOOD SCREWS WITH MINIMUM 2"PENETRATION, TYP. TOP AND BOTTOM.

KEYNOTES:

SCHEDULE

DESCRIPTION DATE

1 ADDENDUM 1 04/30/2018

1

1

(E) WALL

1"X4" CONTINOUS BENT MTL CLIP SECURED TO BACK OF PANEL W/ (2) 1/2" WD SCREWS @ 32" O.C. 1-1/2" MIN. PENETRATION.

1"X4" MTL. CLIP SECRUED TO WALL FRAMING W/ 3" #10 S.M.S. @32" O.C. MAX TOP AND BOTTOM, TYP.

2" ACOUSTIC BOARD MOUNTED @ HEIGHTS ON ELEVATIONS

4"

MA

X.

A5.0

6

A5.0

6

2"1"

GLUE DOWN CARPET TILES OVER (E) CONCRETE FLOOR, TYP. @ 2ND FLOOR

4" CARPET BASE PER SPECIFICATION

(E)WALL

12GA SPLAY WIREWITH 4 TIGHT TURNS

45.00°

(E) CONC. SLAB

5/16" Ø CONC.EXPANSION ANCHOR

1-7

/8"

MIN

3/4

" M

IN

3/4" WIDE X 2"X2"X12 GA. ANGEL HILTI OR EQUAL

HILTI DN27P87.145" Ø SHOT-PIN ANCHOR

NOTE:TEST ONE (1) OUT OF TEN (10) ANCHORS FOR TWO (2) TIMES THE ALLOWABLE LOAD, ALLOWABLE LOAD = 100LBS. TEST LOAD = 200 LBS.

1" WIDE X 2" LONG X 12 GA. MIN STEEL STRAP

12 GA. SPLAY WIRE WITH 4 TIGHT TURNS, TYP.

(E) CONC. SLAB

6".

1"X4"X20GA MTL CLIP SECURED TO BACK OF PANELS W/ (2)1/2" Ø WD SCREW @32" O.C., TYP.

1'-0"

MIN

. O

N 1

ST

FLO

OR

6"

MIN

. O

N 2

ND

FL

OO

R

3"X3"X 18GA MTL ANGLE SECRED TO WALL FRAMING WITH (2) 3" #8 S.M.S. @ 32" O.C. TYP.

1"X4" 20 GA MTL SLIP SECURED TO WALL FRAMING WITH #8 S.M.S @32" O.C. MAX, TOP & BOTTOM. PROVIDE 3" MIN PENETRATION, TYP.

GROOVED WOOD ACOUSTIC PANEL PER ACOUSTICAL SCHEDULE OVER 2" THICK FIBERGLASS ACOUSTIC BOARD, TYP.

(E) MTL STUDWALL W/5/8" TYPE X GYP.BOARD

(E) TRESA PANEL TO REMAIN

2"1"

(E) STRUCTURE & GYP. BD. CEILING

(E) CEILING JOIST,V.I.F.

3"M

AX

POLYMER EDGE 2" ACOUISTICAL CLOUD PER SCHEDULEA4.0

ALL SIDES

4". MIN.

(N) 2X4 FIRE TREATED WD BLOCKINGSCREWED TO (E) STRUCTURE W/ #10S.M.S. @18"O.C.

5/8

"

16 GA. BENT MTL ANGLE ATTACHED TO 2X WOOD BLOCKING WITH #10 WOOD SCREWS @ 8" O.C. TYPICAL, SIDE OF PANELS.

CL (E) FIRE SPRINKLER HEAD TO BE RELOCATED FLUSH WITH UNDERSIDES OF ACOUSTIC PANEL, TYP.

3".

(N) GROOVED WOOD ACOUSTIC PANEL GLUED TO BLOCKING W/ HIGH STRENGTH ADHESIVE

2" FIBERGLASS ACOUSTIC PANEL

6"

MA

X. N

.T.S

.

2X4 FIRE TREATED WOOD BLOCKING @24"O.C. TYP.

(E) METAL STUD FRAMING

1

#10 WOOD SCREW @24" O.C., 2" MIN. PENETRATION, TYP.

(N) PLUMBING EXTENSIONOF (E) FIRE SPRINKLER LINES,TYP. ALL LOCATIONS.

MIN

.3

/4"

(E) METAL STUD FRAMING

6"X 20GA. MTL STUD SECURED TO WD. BLOCKING W/ (1) #10 WD SCREW @32"O.C. 1-1/4"TYP. PENETRATION

STAINLESS STL. ESCUTCHEON, TYP.

(E) MTL STUD WALL WITH 5/8" TYPE X GYP. BD.

2"X FIRE TREATED WOOD BLOCKING SECURED TO (E) STRUCTURE W/ #10 S.M.S. @32" O.C. 2-1/2" MIN PENETRATION, TYP. 4 SIDES, FRAME PER DETAIL 5/-

(E) TERSPA PANELS

2"

1"

(E) OUTLET OR FIXTURE TO BE REINSTALLED FLUSH WITH (N) ACOUSTIC WOOD PANELS, TYP.

ACOUSTIC PANELS GLUED TO WOOD BLOCKING WITH HIGH STRENGTH ADHESIVE

1

MIN.

2"

MIN.

2"

PLAN VIEW A

2" ACOUSTIC FIBERGLASS PANELS

3/4" X 2" MTL TRIM ON ALL4 SIDES OF OPENING

(N) 2"X4" FIRE TREATED WDBLOCKING SECURED TO (E)TRESPA PANELS AND STUDWITH #10 S.M.S. 32"O.C. W/2-1/2" PENETRATION

ELEVATION VIEWB

MIN

2"

MIN2"

MIN2"

MIN

2"

METAL TRIM

FIREALARM

NEW 4" X 6" SIGN (RED)CL

MAX

1/2"

MAX

1/2"2" ACOUSTIC FIBERGLASS PANELS

3/4" X 2" MTL TRIM ON ALL 4 SIDES OF OPENING

(N) 2"X4" FIRE TREATED WDBLOCKING SECURED TO (E)TRESPA PANELS AND STUDWITH #10 S.M.S. 32"O.C. W/2-1/2" PENETRATION

(E) REMOTE ANNUCIATOR PANEL


AC FLS SS

DATE


SCALE:

SHEET TITLE:

A# 04-117018



SHEET NUMBER:

PROJECT NO:

DATE ISSUED:

REVISIONS:

OW

NE

R:

PR

OJE

CT

NA

ME

:

CL

IEN

T A

DD

RE

SS

:

JAN. 31, 2019

As indicated

04-117018

A5.0

INTERIORDETAILS

04/16/2018

IRV

INE

VA

LL

EY

CO

LL

EG

E

IVC

PA

C L

OB

BY

AC

OU

ST

ICIM

PR

OV

EM

EN

TS

5500 IR

VIN

E V

AL

LE

Y D

RIV

E, IR

VIN

E, C

A 92618

1" = 1'-0" 5WALL PANELS

DESCRIPTION DATE

1 ADDENDUM 1 04/30/2018

3" = 1'-0" 1CARPET DETAIL 1" = 1'-0" 9BRACING ATTACHMENT

1 1/2" = 1'-0" 6WALL PANELS ENLARGED

1" = 1'-0" 3ACOUSTIC CLOUD

3" = 1'-0" 4ACOUSTIC GROOVED CEILING PANEL

1" = 1'-0" 10TYPICAL PANEL OPENING AT OUTLETS 3" = 1'-0" 2TYPICAL BLOCKING

1" = 1'-0" 7PANELS AT FIRE ALARM PULL STATION

1

3" = 1'-0" 11WALL PANELS AT FIRE PANEL

1

dhawkins

Callout

SECURE (N) METAL STUDS TO EXISTING METAL FRAMING ABOVE WITH EXP. #10 SMS @ 24" O.C., TYP.

dhawkins

Text Box

(E) STUD FRAMING

dhawkins

Text Box

dhawkins

Text Box

(E) STUD FRAMING

dhawkins

Text Box

dhawkins

Text Box

EACH

dhawkins

Text Box

DSA #04 117018 Irvine Valley College April 17, 2018 Rev. 5.04.18 PAC Building - Main Lobby Acoustic improvements

09 68 00 - CARPETING Page 1 of 5

SECTION 09 68 00

CARPETING

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes: Provide carpeting, both adhesive and tackless (stretched) installations, with accessories, including edge strips where carpeting terminates at other floor finishes, for complete finished installation.

1. Provide rubber nosing at treads and landings with accessories as required for complete installation.

B. Related Sections:

1. Section 09 90 00: Painting and Coatings

1.2 SUBMITTALS

A. Product Data: Furnish manufacturer's literature for carpet and accessories.

B. Shop Drawings: Clearly indicate location of seams, method of joining seams, carpet pile direction, adhesives to be used, integrating edge strips with carpet, and installation procedures.

C. Samples: Furnish samples of each type, color and pattern of carpet and edge strip.

D. Certificate of Compliance: Provide manufacturer's certificate of compliance stating each material delivered conforms to Specifications.

E. Maintenance Recommendations: Prior to final acceptance of carpet installation, furnish carpet manufacturer's detailed maintenance recommendations for care, cleaning and repair of carpets installed.

F. Extra Materials: Roll excess carpet on separate rolls for each type and size; label rolls to identify type, width, length, and locations installed.

1. Wrap and deliver unused portions greater than 2'-0" square and more than 12" wide.



1.3 QUALITY ASSURANCE

A. CALGreen Sustainability Requirements: Comply with CALGreen requirements including those relative to finish material pollution control for carpet systems, carpet cushion, and adhesives.

B. Installer Qualifications: Approved by carpet manufacturer; upon request, submit letter from carpet manufacturer stating installer is acceptable.

C. Mock-Up: Provide not less than 100 sf mock-up of epoxy chip flooring and adjacent base at location as approved by Architect. Approved mock-up may be incorporated into Project.

1.4 PROJECT CONDITIONS

A. Do not commence carpet installation until painting and finishing work is complete and ceiling and other overhead work has been tested, approved and completed, unless specifically approved.

B. Maintain room temperature at minimum 60 degrees F for at least 24 hours prior to installation; relative humidity shall be approximately that at which the area is to be maintained.

C. Schedule, receive and place carpet on floors indicated; protect from soiling and damage during transit, storage, and installation.

1.5 WARRANTY

A. Extended Correction Period: Provide for promptly repairing or replacing carpet which exhibits evidence of defective materials or workmanship.

1. Repairs: Make repairs within ten days of Owner's written notification.

2. Period: Two years.

B. Manufacturer’s Warranty: Submit manufacturer’s lifetime warranty that carpet will lose no more than 10% weight of face yarn, and will not ravel, delaminate, or zipper.

PART 2 - PRODUCTS

2.1 SYSTEMS MANUFACTURERS

A. Shaw Industries Group.

B. Substitutions: Refer to Section 01 25 00.



2.1 MATERIALS

A. System Description: Provide carpeting with accessories, including edge strips where carpeting terminates at other floor finishes.

B. Regulatory Requirements, Flammability: Carpet and underlay shall have passed following tests.

1. DOC-FF-1-70: Pass. 2. ASTM E662 or NFPA 258 (Smoke Density): 450 or less. 3. ASTM E648 or NFPA 253 (Flooring Radiant Panel Test): 0.45 or higher.

C. Regulatory Requirements, Accessibility:

1. Carpet shall be securely attached and shall have a firm cushion, pad or backing or no

cushion or pad. It shall have a level loop, textured loop, level cut pile, or level cut/uncut pile texture. Pile height shall be ½” maximum. CBC Section 11B-302.2.

2. Exposed edges shall be fastened to floor surfaces and shall have trim on the entire length. Carpet edges shall comply with CBC Section 11B-303.

D. Design Criteria: Provide carpet materials that bear Carpet and Rug Institute “Green Label Plus”.

E. Performance Criteria: Carpet shall develop less than 3.0 kilovolts of static at 70 degrees F and 20% relative humidity.

F. Carpet: tiles to be installed: 1. Shaw collection: Diffuse and Disperse 2. Carpet color: Annual #75150 3. Carpet tile size: 24” x 24” 4. Construction: Multi-level pattern loop 5. Fiber: type 6.6 or later generation eco solution with soil hiding nylon 6. Dye method: 100% solution dyed 7. Tuft Weight: 16.0 8. Backing: Polypropylene. 9. Antimicrobial Treatment: Provide to inhibit growth of bacteria, mold, and mildew. 10. Soil-Resistant Treatment: Manufacturer’s standard integral stain resistance. 11. Carpet shall have no latex backing materials.

G. Public Area Underlay: None

H. Carpet Gripper: Type recommended by carpet manufacturer to suit application, complete with attachment devices.

I. Adhesive: Nontoxic type recommended by carpet and underlay manufacturers to suit application and expected service.



J. Leveling and Ramping Material: Latex-cement material designed for providing thin solid surface for leveling and minor ramping of subsurface to adjacent floor finishes.

1. Use material capable of being applied and feathered out to adjacent floor without spalling.

K. Edge Strips: Metal, vinyl or rubber as indicated; manufacturer's standard colors as selected; as directed by Architect where not otherwise indicated.

L. Accessories: Provide as required for complete finished installation. PART 3 - EXECUTION

3.1 PREPARATION

A. Clean floors of dust, dirt, solvents, oil, grease, paint, plaster and other substances detrimental to proper performance of adhesive and carpet; allow floors to thoroughly dry.

B. Ensure floors are level, with maximum surface variation of 1/4" in 10 feet.

C. Ensure concrete floors are free from scaling and irregularities and exhibit neutrality relative to acidity and alkalinity.

D. Use leveling and ramping material to patch cracks, small holes, leveling and for ramping to provide finished carpet within 1/2" of adjacent flooring materials.

E. Test substrate for moisture content in accordance with flooring manufacturer recommendations; where moisture content exceeds manufacturer recommendations take measures recommended by flooring manufacturer.

3.2 INSTALLATION

A. Adhesive Installation: Prime substrate if required and as recommended by manufacturer; spread adhesive in quantity recommended by manufacturer to ensure proper adhesion over full area of installation.

1. Apply only enough adhesive to permit proper adhesion of carpet before initial set.

B. Install carpet in accordance with carpet manufacturer recommendations and installation instructions.

1. Check matching of carpet before cutting and ensure there are no visible defects or variations between dye lots.

2. Lay out rolls of carpet for Architect's approval.

C. Cut carpet, where required, in manner to allow proper seam and pattern match; ensure cuts are straight, true, and unfrayed.



D. Where possible and practical, locate seams in areas of least amount of traffic; no seams shall be perpendicular to doors or entries; seams parallel to doors shall be centered directly under door.

1. Follow wall line parallel to carpet direction for seams occurring at corridor change of direction.

2. Join seams in recommended manner so as not to detract from appearance of carpet installation and decrease its life expectancy; ensure seams are straight, not overlapped or peaked, and free of gaps.

E. Adhesive Installation: Install carpet securely bonded to substrate.

F. Lay carpet with run of pile in direction of anticipated traffic; do not change run of pile in any one room or from one room to next where continuous through a wall opening.

G. Cut and fit carpet neatly around projections through floor and to walls and other vertical surfaces.

H. Fit carpet snugly to walls or other vertical surfaces where no base is scheduled, leaving no gaps.

I. Do not place heavy objects such as furniture on carpeted surfaces for minimum of 24 hours or until adhesive is set.

J. Lay installation tight and flat to sub-floor, well fastened, and uniform in appearance; ensure monolithic color, pattern and texture match within any one area.

K. Edging Strips: Install in accordance with manufacturer recommendations and installation instructions.

1. Install edging strips where carpet terminates at other floor coverings.

2. Use full length pieces only, butt tight to vertical surfaces. Where splicing cannot be avoided, butt ends tight and flush.

3.3 CLEANING

A. Clean in accordance with manufacturer's recommendations and as specified in Section 01 70 00 – Execution Requirements.

END OF SECTION