www.adclaundry.com

60-lb Capacity Rigid Mount/100 G-ForceCOIN Washer/Extractor

EWS-60 COIN Washer/Extractor

• Coin or Card Ready• Inverter Driven Motor• Heavy-Duty Structural Tube Construction• Stainless Steel Cabinet• Easy to Program and Easy to Use Controls • Load Imbalance Detection Before Spinning• Large, Convenient Supply Dispenser• Flexible Water Level Settings• Ergonomic, Easy-Grip Door Handle•

Your local ADC independent authorized distributor

Why Purchase ADC EcoWash?

Rugged Structural Tube ConstructionEcoWash rapid spin washer/extractors are constructed with a structural tube design frame in combination with a heavy-duty cast aluminum counter weight to provide superior strength and maximum stability throughout the wash cycle.

Durable Door Safety Lock and HandleThe durable ergonomic design of the door handle combined with our Easy Lock™ door lock provides maximum convenience and safety.

Large, Convenient Supply DispenserEasy to use, this large supply dispenser allows you to conveniently load your detergent, bleach and fabric softeners before starting your wash cycle.

*

EcoWash EWS-60

10/5 Year Limited Warranty*

88 Currant Road Fall River, MA 02720-4781 • 508.678.9000 • Fax: 508.678.9447 • Email: sales@amdry.com

www.adclaundry.com

100 G-Force Standard Spin Washer-ExtractorFeatures EWS-60DRUMLoad Capacity (lb/kg) 60 / 27Drum Volume (cu. ft./liter) 8.82 / 250Drum Diameter (in/mm) 30.31 / 769Drum Depth (in/mm) 20.86 / 529DIMENSIONSWidth (in/mm) 34.84 / 884Depth (in/mm) 40.78 / 1035Height (in/mm) 52.003 / 1320Weight (lb/Kg) 749.57 / 340DIMENSIONS WITH PACKAGINGCrated Width (in/mm) 36.61 / 929Crated Depth (in/mm) 45.67 / 1160Crated Height (in/mm) 61.43 / 1560Crated Weight (lb/Kg) 815.71 / 370DOORHeight to Bottom of Door (in/mm) 25.76 / 654Door Opening Diameter (in/mm) 14.72 / 373POWERVoltage/Phase 208-240 / 3øFull load current / Breaker (amps) - 1ø 13 / 20Full load current / Breaker (amps) - 3ø 9.54 / 15CONNECTIONSWater Inlet (in/mm) .75 / 19

.75 / 19Drain (in/mm) 3 / 76CYLINDER SPEEDWashing speed (r.p.m.) 48Spinning speed (r.p.m.) 483G-Force 100FLOOR LOADINGStatic Floor Load 749 lb / 3,40 kNDynamic Floor Load 132 lb / 0,6 kNMaximum Vertical Load 881 lb / 4 kNDynamic Load Frequency (Hz) 8.1G Factor 100OPTION HEAT SOURCESSteam Inlet (in/mm) 3/4 / 1.91Electric 18 kWWATERAverage Usage (gallons)* 49.71

EcoWash EWS-60

FRONT VIEW

BACK VIEW

SIDE VIEW

Intuitive Micro Controls (IMC®) That MakesWashing Easy For You and Your Customers

Intuitive Micro Controls (IMC®) is our programmable microprocessor that is customizable, easy to program and easy to use. You can simplify existing programs; modify or delete the temperature and times of each phase of the cycle, as well as modify water levels to achieve maximum savings in your Laundromat. Multi vend pricing capability also enables you to maximize your Laundromat’s revenue.

* one wash, two rinse cycles

Five-Year Limited Warranty on Parts (Parts Only – Labor Not Included). For the �rst �ve (5) years from the date of purchase, when this commercial appliance is installed, maintained and operated according to the instructions attached to or furnished with the product, American Dryer brand of Whirlpool Corporation (hereafter “ADC”) will pay for factory-speci�ed parts or original equipment manufacturer parts to correct defects in materials or workmanship.Sixth-Through Tenth-Year Limited Warranty (Certain Component Parts Only). In the sixth through tenth years from the date of purchase, when this commercial appliance is installed, operated and maintained according to the instructions attached to or furnished with the product, ADC will pay for factory-speci�ed replacement parts for the following components to correct non-cosmetic defects in materials or workmanship in the parts that prevent function of the product and that existed when this commercial appliance was purchased. This is a limited 10-year warranty on the named parts only and does not include labor: outer shell, drum and shaft assembly, inner welded frame bearings and seals. See complete warranty for details.

P/N 451052 REV 4/16