Fresh Air & Hot Air Attenuators Sheet on the Louver BOX. Fresh Air Attenuators Elements Procedure of Isntallation of Fresh & HOT Air Attenuators Step 1: Suitable Size Louver Box is made with Steel Channels.and anchored to wall and ground. Steel Frame Work to House Attenuators-Louv er Box. Step 2: Tilted Horzontal Angles are welded within the Louver Box Inside Walls. At a pitch of 100 mm Step 3: The attenuators of 100 mm thicknes are inserted in the channel slot within the Louver Box. Step 4: The Louver element locked by welding angle on the external border of the louver Box. Step 5: MS Sheet is reveted on the outer side of the BOX.
Procedure of Isntallation of Fresh & HOT Air AttenuatorsStep
1: Suitable Size Louver Box is made with Steel Channels.and
anchored to wall and ground. Steel Frame Work to House
Attenuators-Louver Box.
Step 2: Tilted Horzontal Angles are welded within the Louver Box
Inside Walls. At a pitch of 100 mm
Step 3: The attenuators of 100 mm thicknes are inserted in the
channel slot within the Louver Box.
Step 4: The Louver element locked by welding angle on the
external border of the louver Box.
Step 5: MS Sheet is reveted on the outer side of the BOX.
Hot Air Ducting for Radiator
Steel Frame Work
MS Sheet
Inter Connecting Canvas
Procedure Hot air Inter connection with RadiatorStep 1: Suitable
Size MS steel Frames are made with the requisite opening for
Radiator
Step 2: MS sheet is revetted on the steel frame.
Step 3: Radiator and the framework is connected by way of
Canvas
Hot Air Rain Protection Louvers
Single Leaf Acoustic Hinged Doors
Rain Protection Louvers
Procedure for rain Protection Louvers Installation Steel Frame
WorkStep 1: Suitable Size MS steel Frames are made fixed on One End
of Hot Air Louvers
Step 2: Rain Protection Elements are revetted on these
frames
