Embed Size (px)
Citation preview
AOC LM960
Page 1 of 54
19” LCD Monitor EN9600
LM960S LM960
THESE DOCUMENTS ARE FOR REPAIR SERVICE INFORMATION ONLY. EVERY REASONABLE EFFORT HAS
BEEN MADE TO ENSURE THE ACCURACY OF THIS MANUAL; WE CANNOT GUARANTEE THE ACCURACY OF
THIS INFORMATION AFTER THE DATE OF PUBLICATION AND DISCLAIMS RE LIABILITY FOR CHANGES,
ERRORS OR OMISSIONS.
MANUFACTURE DATE: Aug-24-2005
SERVICE MANUAL
http:/
/www.w
jel.ne
t
AOC LM960
Page 2 of 54
REVISION DATE MODIFIACTION
A00 Aug-24-2005
http:/
/www.w
jel.ne
t
AOC LM960
Page 3 of 54
TABLE OF CONTENTS
R ev is i on L i s t - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 02
Table of Contents ---------------------------------------------------------------------------------------- 03
1. Monitor Speci f icat ions --------------------------------------------------------------------------------04
2 .LCD Mon i to r Descr ip t ion - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -05
3.Operat ion Ins t ruc t ions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -06
3.1 Genera l Ins t ruc t ions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -06
3.2 Cont ro l But ton - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -06
3.3 Adjust ing The Picture ---------------------------------------------------------------------07～08
4. Input /Output Spec i f ica t ion - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09
4.1 Input S igna l Connector - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -09
4.2 Fac tory Preset D isp lay Modes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -10
4 .3 Power Supp ly Requ i rements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -10
5.Panel Spec i f ica t ion- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12
5.1 Genera l Feature - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12
5.2 Opt ica l Charac ter is t ics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13
6. B lock Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13
6 .1 Mon i to r Exp loded View - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13
6.2 Software Flow Chart - ----------------------------------------------------------------------14～15
6.3 Electr ical Block Diagram -----------------------------------------------------------------16～17
7. Schemat ic - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -18
7.1 Scalar Board ---------------------------------------------------------------------------------18～23
7.2 Power Board - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -24～26
8. PCB Layout - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -27
8.1 Main Board - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -27
8 .2 Power Board - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -28
8 .3 KEY Boa rd - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
9. Main ta inab i l i ty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -29
9 .1 Equ ipments and Too ls Requ i rements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -29
9.2 Trouble Shooting - --------------------------------------------------------------------------30～35
10. Whi te -Ba lance, Luminance Ad jus tment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 36
11. Check List after replacing LCD Main board----------------------------------------------- 37～39
1 2 . E D I D C o n t e n t - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 0
13. BOM L is t - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -41～54
http:/
/www.w
jel.ne
t
AOC LM960
Page 4 of 54
1. MONITOR SPECIFICATIONS
Driving system TFT LCD
Size 48cm(19")
Type HSD190ME12 (HSD)
Pixel pitch 0.294mm(H) x 0.294mm(V)
Viewing angle 140(H) 130(V) (R>10)
Luminance 250cd/m2
Contrast Ratio 500:1
Response time 16ms (typ)
LCD Panel
Display colors 16.2 million Colors
R G B Analog 0.7Vp-p
H/V separate TTL level
H/V composite TTL level
Horizontal frequency 30kHz–83kHz
Vertical rate 55-75Hz
Input signals
Recommend resolution 1280 x 1024@75HZ
ON MODEL ≤50W Power consumption
OFF MODEL ≤2W
Power supply AC voltage 100~240VAC,47~63Hz
Operating condition Temperature 5-50°C
Storage Condition Temperature -20-60°C
Dimension Unpackaged 423 mm (W) x 429mm (H) x 215mm (D)
Maximum Screen Size Horizontal: 376.32mm，Vertical: 301.056mm
http:/
/www.w
jel.ne
t
AOC LM960
Page 5 of 54
2. LCD MONITOR DESCRIPTION The LCD MONITOR will contain a main board, a power board and a keypad board which house the flat panel control
logic, brightness control logic and DDC.
The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips each
voltage.
PWPC board
(Include: adapter, inverter)
Flat Panel and
CCFL backlight
Main Board
Keyboard
RS232 Connector
For white balance
adjustment in
factory mode
HOST Computer
CCFT Drive.
AC-IN
100V-240V Video signal, DDC
Monitor Block Diagram
http:/
/www.w
jel.ne
t
AOC LM960
Page 6 of 54
3. OPERATING INSTRUCTIONS 3.1 GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor. By changing these settings, the picture can be adjusted to your personal preferences.
• The power cord should be connected.
• Connect the video cable from the monitor to the video card.
• Press the power button to turn on the monitor position. The power indicator will light up.
3.2 FRONT PANEL CONTROL
1. MENU / ENTER 2. / Contrast
3. Power Button/ LED 4. / Brightness
5. Auto Adjust button / Exit
FRONT PANEL CONTROL
• Power Button:
Press this button to turn the monitor ON or OFF.
• Power Indicator:
Blue — Power On mode.
Orange — Off mode.
• MENU / ENTER :
Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD
menu when in Brightness/ Contrast Adjust OSD status.
• Brightness / :
Adjust brightness or function adjust.
• Contrast / :
Adjust contrast or function adjusts.
• Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).
2. When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.
http:/
/www.w
jel.ne
t
AOC LM960
Page 7 of 54
3.3 ADJUSTING THE PICTURE
THE DESCRIPTION FOR CONTROL FUNCTION:
Main Menu
Item
Main
Menu
Icon
Sub Menu
Item
Sub Menu
Icon Description
Adjust
Range Reset Value
Contrast
Contrast from Digital-register. 0-100 Recall Cool
Contrast ValueLuminance
Brightness
Backlight Adjustment 0-100
Recall Cool
Brightness Value
Focus
Adjust Picture Phase to reduce
Horizontal-Line noise 0-100 Do Auto Config
Image Setup
Clock
Adjust picture Clock to reduce
Vertical-Line noise. 0-100 Do Auto Config
H. Position
Adjust the horizontal position of the
picture. 0-100 Do Auto Config
Image
Position V. Position
Adjust the vertical position of the
picture. 0-100 Do Auto Config
C1 N/A Recall warm C1 Temperature from
EEPROM. N/A
C2 N/A Recall cool C2 Temperature from
EEPROM. N/A
User / Red
Red Gain from Digital-register. 0-100
User /
Green Green Gain from Digital-register. 0-100
User / Blue
Blue Gain from Digital-register. 0-100
The Color
Temperature will
be set to Cool.
The User R/G/B
value (default is
100) will not be
Modified by Reset
function.
Color Temp.
sRGB N/A Recall sRGB from EEPROM. N/A sRGB
http:/
/www.w
jel.ne
t
AOC LM960
Page 8 of 54
Yes N/A Auto Adjust the H/V Position, Focus
and Clock of picture. N/A N/A Auto Config
(Analog-Only
Model)
No N/A Do not execute Auto Config, return
to main menu. N/A N/A
H. Position
Adjust the horizontal position of the
OSD. 0-100 50
V. Position
Adjust the vertical position of the
OSD. 0-100 50 OSD Setup
OSD
Timeout Adjust the OSD timeout. 10-120 10
English N/A Set OSD display language to
English. N/A
Deutsch N/A Set OSD display language to
German. N/A
Français N/A Set OSD display language to
French. N/A
Español N/A Set OSD display language to Spain. N/A
Language
Italiano N/A Set OSD display language to Italian. N/A
The Language
will be set to
English.
Information
Information N/A
Show the resolution, H/V frequency
and input port of current input
timing.
N/A N/A
Yes N/A
Clear each old status of
Auto-configuration and set the color
temperature to Cool.
N/A N/A
Reset
No N/A Do not execute reset, return to main
menu. N/A N/A
Exit
N/A N/A Exit OSD N/A N/A
http:/
/www.w
jel.ne
t
AOC LM960
Page 9 of 54
4. INPUT/OUTPUT SPECIFICATION 4.1 INPUT SIGNAL CONNECTOR
ANALOG D-SUB CONNECTOR
PIN NO. DESCRIPTION PI N NO. DESCRIPTION
1. Red 9. +5V
2. Green 10. Detect Cable
3. Blue 11. TXD
4. RXD 12. DDC-Serial Data
5. Ground 13. H-Sync
6. R-Ground 14. V-Sync
7. G-Ground 15. DDC-Serial Clock
8. B-Ground
VGA connector layout
1 56 10
11 15
http:/
/www.w
jel.ne
t
AOC LM960
Page 10 of 54
4.2 FACTORY PRESET DISPLAY MODES
STANDARD RESOLUTIONHORIZONTAL
FREQUENCY
VERTICAL
FREQUENCY
Dos-mode 720 x 400 31.47kHz 70.0Hz
640 × 480 31.47kHz 60.0Hz VGA
640 × 480 37.50kHz 75.0Hz
800 × 600 37.879kHz 60.0Hz SVGA
800 × 600 46.875kHz 75.0Hz
1024 × 768 48.363kHz 60.0Hz
1024 × 768 56.476kHz 70.0Hz XGA
1024 × 768 60.021kHz 75.0Hz
1280 × 1024 64.000kHz 60.0Hz SXGA
1280 × 1024 80.000kHz 75.0Hz
4.3 POWER SUPPLY REQUIREMENT
A/C Line voltage range : 100 V ~ 240 V
A/C Line frequency range : 50 ± 3Hz, 60 ± 3Hz
Current : 1.5A max at 100V; 0.8A max at 240 V
Peak surge current : < 55A peak at 240 VAC and cold starting
Leakage current : < 3.5mA
Power line surge : No advance effects (no loss of information or defect)
with a maximum of 1 half-wave missing per second
Voltage : 5VDC ± 5％;12VDC ± 5％
CURRENT : 1.5Amp (5V) ；2 Amp (12V)
http:/
/www.w
jel.ne
t
AOC LM960
Page 11 of 54
5. PANEL SPECIFICATION 5.1 GENERAL FEATURE
19”SXGA TFT LCD panel
4 CCFLs Backlight system
Supported SXGA (V:1024 lines, H:1280 pixels) resolution
Supported to 75Hz refresh rate¦ With LCD Timing Controller
Display Characteristics
http:/
/www.w
jel.ne
t
AOC LM960
Page 12 of 54
5.2 OPTICAL SPECIFICATION
ELECTRICAL SPECIFICATIONS
http:/
/www.w
jel.ne
t
AOC LM960
Page 13 of 54
6. BLOCK DIAGRAM 6.1 MONITOR EXPLORED
1 KEY PAD 33G6288-Q1-L
2 LENS 33G6289-1
3 BEZEL 34G6201AGM-2B
4 PANEL BRACKET 15G6207-R-2
5 PANEL BRACKET 15G6207-L-2
6 REAR COVER 34G6202-GM-4B
7 SHIELD 85G6119-4
8 PANEL BRACKET 15G6207-R-2
9 HINGE
10 STAND 34G1435-GM-B
11 BASE 34G6203-GM-B
12 HINGE BRACKET 15G6206-1
13 HINGE BRACKET 15G6206-1
14 KEY PAD 33G6288-Q1-L
http:/
/www.w
jel.ne
t
AOC LM960
Page 14 of 54
6.2 SOFTWARE FLOWING CHART
1
2
N
Y
5
Y
N
10
Y
N
12
Y
N
7
Y
N
6
4
3
8
9
14
11
13
Y
N
15
Y
N16
17
19
Y
N 18
http:/
/www.w
jel.ne
t
AOC LM960
Page 15 of 54
REMARK:
1) MCU initialize.
2) Is the EEprom blank?
3) Program the EEprom by default values.
4) Get the PWM value of brightness from EEprom.
5) Is the power key pressed?
6) Clear all global flags.
7) Are the AUTO and SELECT keys pressed?
8) Enter factory mode.
9) Save the power key status into EEprom.
Turn on the LED and set it to green color.
Scalar initialize.
10) In standby mode?
11) Update the lifetime of back light.
12) Check the analog port, are they’re any signals coming?
13) Does the scalar send out an interrupt request?
14) Wake up the scalar.
15) Are there any signals coming from analog port?
16) Display "No connection Check Signal Cable" message. And go into standby mode after the message
disappear.
17) Program the scalar to be able to show the coming mode.
18) Process the OSD display.
19) Read the keyboard. Is the power key pressed?
http:/
/www.w
jel.ne
t
AOC LM960
Page 16 of 54
6.3 ELECTRIAL BLOCK DIAGRAM
6.3.1 MAIN BOARD
MCU
W78E65P-40
(U601)
Scalar TSU56AK-LF
(Include ADC,OSD)
(U401)
EEPROM
AT24C16N
(U602)
EPR_SDA
EPR_SCL
LCD Interface
(CN503)
D-Sub
Connector
(CN301)
EEPROM
24C02
(U301)
H sync
V sync
RGB
DDC_SDA,
DDC_SCL
http:/
/www.w
jel.ne
t
AOC LM960
Page 18 of 54
7. SCHEMATIC 7.1 MAIN BOARD
715L1237-1-3
VAA1
B3
6.MCU
onBACKLITE
ST_DET2
onPANEL_5V/3.3V
SDA
INT
CSZDDC_DAT
ST_DET1
SCL
HWRESET
DDC_CLK
Volume
VCC5V
VCC12V
VCPU
RXDTXD
AD0AD1AD2AD3
VAA1
PB[0..9]VLCD
VCC5V
VCC3.3
VAA3
VCC3.3
B1
3.INPUT
RIN
GIN
BIN
VSYNC
GNDR
GNDG
GNDBST_DET1 HSYNC
SOGDDC_CLKDDC_DAT
ST_DET2
R+R-
G-G+
B+B-
CLK+CLK-
TXDRXD
B2
4.SCALER
RIN
GIN
SOGBIN
GNDR
GNDG
GNDBHSYNCVSYNC
R+R-
G-G+
B+B-
CLK+CLK-
CSZSCLSDAHWRESETINT
Volume
AdjBACKLITE
PA[0..9]
PB[0..9]
VCC2.5
VCC3.3
VAA1
VAA2
VAA3
VAA4
AD0AD1AD2AD3
VCC12V
VAA4
VCC5V
VCC2.5
B4
2.POWER
onPanel_5V/3.3VonBACKLITE
AdjBACKLITEVCC3.3
VCC2.5VAA1VAA2VAA3VAA4VCC5V
VCC12V
VLCD
VCPU
VAA2
VCPU
MST8031/8131 SCHEMATIC
VLCD
VCPU
VAA4
PA[0..9]
VAA3
TOP D
MST8031 / MST8131 for AOCB
1 6Wednesday, April 14, 2004
Title
Size Document Number Rev
Date: Sheet of
B5
5.PANEL INTERFACE
VLCD
PB[0..9]
PA[0..9]
VCC12V
VCC2.5 VAA2
TSU16AK
TSU16AK for AOChttp:/
/www.w
jel.ne
t
AOC LM960
Page 19 of 54
R213
NC
VAA1 4
GND
R2031K 1/16W
AdjBACKLITE4
onPanel_5V/3.3V6
R207
4.7K 1/16W
C203
0.1uF
C217
0.068uF
VCC5V
VAA2 4
VAA4
VLCD
VCC12VVLCD 5
R201 4.7K 1/16W
+ C208100uF/16V
VCC12V
VCC5V
C205
0.1uF
R212 4.7K 1/16W
+C204
220uF/25V
C212
0.1uF
NEWCircuit
VCC3.3 4
VCC12V 6
R20410K 1/16W
FB201600 OHM
Brightness
R216
4.7K 1/16W
VCC12V
VCC2.5
TO-263
GND
R214 delete R208
10K 1/16W
C
B E
C2061uF/25V
SOT-252
onBACKLITE 6GND
VCC3.3
Q204
PMBS3904
32
1
U201
RT91643 2
1
VI VO
GN
D
VCC5V+
+C215
47uF/16V
U202AIC1084-33M
3
1
2VIN
ADJ
VOUT
VAA2
Q201PMBS3904
32
1
C214
0.1uF
+C202
220uF/25V
D202
GS1D
R205 4.7K 1/16W
R210
NC
D201 SS14
VCC2.5 4
VCC5V
CN201
CONN
24681012
13579
11
VCPU
VCC5V
+C211
47uF/16V
GND
VCC3.3
VCC12V
R209
0 1/16W
VCPU 6
VCC5V
R202
10K 1/16W
C210
0.1uF
C207
0.1uF
VCC5V
GND
C
B E
Q202
PMBS3904
32
1
ON_OFF
VCC5V+
VCC5V
R215
100K 1/16W
VAA1
VAA3
R206
10K 1/16W
POWER D
MST8031/ MST8131 for AOCB
2 6Friday, November 26, 2004
Title
Size Document Number Rev
Date: Sheet of
VCC5V+
C216
0.1uF
VAA3 4
R211
10K 1/16W
VCC5V 3,4,6
C201
0.1uF
DIM
Q203AO3401
VCC5V
GND
VAA4 4
TSU16AK for AOC http:/
/www.w
jel.ne
t
AOC LM960
Page 20 of 54
R- 4
R305 100 1/16W
R322 100 1/16W
GNDB 4
CLK- 4
TXD 6
VCC5V
R302 100 1/16W
GNDG 4
C312
220pF
D314LL5232B 5.6V 5%
RXD 6
ST_DET2 6
DVI5V
R31810K 1/16W
C301
NC
DVI5V
D306BAV99
3
12
R304 470 1/16W
R32110K 1/16W
CN301DB15
162738495
11
12
13
14
1510
PC5V
R310 1K 1/16W
D321TZMC5V6-GS08
C306 0.047uF
HSYNC 4 D304
BAV70
1
23
R303 100 1/16W
D313BAV99
3
12
VCC5V
VSI
C313
0.1uF
D311BAV99
3
12
RIN 4
R306 100 1/16W
GIN 4
R+ 4
DDC_CLK6
C315
0.1uF
R320 100 1/16W DAT_DDC2
FB302 0 1/16W
VGA_CON
U301
M24C02WMN6
12345
678
A0A1A2
GNDSDASCLWPVCC
D305
BAV70
1
23
VSYNC 4
C308 0.047uF
CLK_DDC2
B+ 4
G- 4
C305 0.047uF
R319 100 1/16W
D323TZMC5V6-GS08
C309 0.047uF
C307 0.001uF
DAT_DDC
R323
10K 1/16W
R301 100 1/16W
R317
10K 1/16W
GNDR 4
BIN 4
C311
33pF
CLK+ 4
HSI
D318TZMC5V6-GS08
D302BAV99
3
12
R314
10K 1/16W
D312BAV99
3
12
D317TZMC5V6-GS08
R312 100 1/16W
VCC5V
ST_DET1 6
CLK_DDC
FB304 150 OHM
G+ 4
C304 0.047uF
D309BAV99
3
12
VCC5V
D320TZMC5V6-GS08
D315LL5232B 5.6V 5%
D301BAV99
3
12
C314
0.1uF
DDC_DAT6
C310 0.047uF
C303
NC
R308
10K 1/16W
D307BAV99
3
12
PC5V
R316 100 1/16W
R32
775
1/1
6W
D303BAV99
3
12
R309 100 1/16W
R307 100 1/16W
C302
NC
VCC5V
R32410K 1/16W
INPUT D
MST8031/ MST8131 for AOCB
3 6Tuesday, November 09, 2004
Title
Size Document Number Rev
Date: Sheet of
CN302
JACK
12
3
45
67
8
25
28
910
11
1213
14
15
16
26
29
1718
19
2021
22
2324
27
DAT2-DAT2+
2/4shield
DAT4-DAT4+
DDC SCLDDC SDA
VSYNC
R
HSYNC
DAT1-DAT1+
1/3shield
DAT3-DAT3+
+5V
SYNC GND
HPD
G
RGB GND
DAT0-DAT0+
0/5shield
DAT5-DAT5+
clk shield
clk+clk-
B
FB303 0 1/16W
SOG 4
R315 100 1/16W
B- 4
R313
2.2K 1/16W
R32
675
1/1
6W
R311 1K 1/16W
R325
75 1/16W
D319TZMC5V6-GS08
D308BAV99
3
12
D322
TZMC5V6-GS08
U302
M24C02WMN6
12345
678
A0A1A2
GNDSDASCLWPVCC
FB301 0 1/16W
D310BAV99
3
12
D316LL5232B 5.6V 5%
TSU16AK for AOC http:/
/www.w
jel.ne
t
AOC LM960
Page 21 of 54
NC
VAA12
B-3
VDPLL
VAD
PB9
C4070.1uF
R401NC
FB401
600 OHM
Direct Bus
C4230.1uF
VPO
VDVI
PA1
C4180.1uF
GNDR3
VDDC4120.1uF
GNDB3
3-WIRE
VAD
PA3
+C42410uF/16V
AdjBACKLITE2
VCC2.52
PA9
R401
R-3
PB5
+C40510uF/16V
VAA1
PB4
VDVI
PB2
C4110.1uF
PA8
FB404
600 OHM
CSZ6
+C41410uF/16V
PA[0..9]
C4130.1uF
VSYNC3
GIN3
VAA3
PA6
C4080.1uF
+C41910uF/16V
C4090.1uF
PB[0..9]
PB6
+C42210uF/16V
PA7
AD0 6
PB7
C4260.1uF
R405
10K 1/16W
C4150.1uF
FB403
600 OHM
HSYNC3
CLK-3
PB3
R407
10K 1/16W
VCC2.5
C4200.1uF
U401
MST8031/8131
63
60
6158
62
59
573738
404143444647495052
66
67
69
7071
3272
7374
10755 35 45
3
51 11 21 84 94 104
114
126
18 87 97 117
3956 36
2
54 42 10 20 85 95 115
127
19 86 96105
116
33
34
108109110111112113
1181191201211221231241251281
2928
30
31
536564 48
106103102
68
7778
6
RIN0
GIN0
SOGIN0BIN0
RIN0M
GIN0M
BIN0MHSYNC0VSYNC0
R+R-G+G-B+B-CK+CK-REXT
REFP
REFM
CSZ
SDASCL
HWRESETZINT
PWM0PWM1
LVACKMA
VD
D
AV
DD
_MP
LL
AV
DD
_DV
I
BYPASS
AV
DD
_DV
I
VD
DP
VD
DP
VD
DP
VD
DP
VD
DP
VD
DP
VD
DP
VD
DC
VD
DC
VD
DC
VD
DC
AV
SS
_DV
I
AV
SS
AV
SS
_MP
LLAVSS_LPLL
AV
SS
_PLL
AV
SS
_DV
I
GN
DP
GN
DP
GN
DP
GN
DP
GN
DP
GN
DP
GN
DC
GN
DC
GN
DC
GN
DP
GN
DC
XIN
XOUT
LVA2PLVA2MLVA1PLVA1MLVA0PLVA0M
NC/LVB3PNC/LVB3M
NC/LVBCKPNC/LVBCKM
NC/LVB2PNC/LVB2MNC/LVB1PNC/LVB1MNC/LVB0PNC/LVB0M
DDC1_CLK/GPO8DDC1_DAT/GPO7
ADO/NC
AD3/NC
AV
DD
_PLL
AV
DD
AV
SS
AV
SS
_DV
I
LVACKPLVA3MLVA3P
AV
SS
AD1/NCAD2/NC
BUS TYPE/NC
VCC5V
C4170.1uF
R403 390 1/16W
PB1
R404
10K 1/16W
C4160.1uF
VAA22
AD2 6
RIN3
PB0
R+3
+C42710uF/16V
C4280.1uF
G-3
VPO
CLK+3
PA5
4.7K
G+3
VAA4
C404 0.1uF
PB[0..9] 5
NC
C402 22pF
Volume6
VPLL
4.7K
VAA2
FB402
600 OHM
C4210.1uF
VDPLL
PB8
C4250.1uF
SCL6
AD3 6
VDVI
PA[0..9] 5
R402
INT6
VDD
FB405
600 OHM
HWRESET6
VCC3.3
FB406
600 OHM
VCC3.3
C403 22pF
SCALER D
MST8031/ MST8131 for AOCB
4 6Wednesday, April 14, 2004
Title
Size Document Number Rev
Date: Sheet of
VPLL
B+3
C4100.1uF
BIN3
X401
14.318MHz
VAA42
R402
100 1/16W
GNDG3SOG3
PA0
PA2
R406
10K 1/16W
C4060.1uF
PA4
VCC3.32
AD1 6
C401
0.1uF
VAA32
SDA6
TSU16AK
TSU16AK for AOChttp:/
/www.w
jel.ne
t
AOC LM960
Page 22 of 54
LVB3M
LVB3MRXE3+
LVBCKM
PB0RXEC+
PA6
RXE2-
LVB1M
LVA1PRXE1-
LVB0M
PB3
R502
0 1/16W
LVA1PLVA0P
LVB0P
PA[0..9]
PB[0..9]4
RXO0-LVACKP
LVB1P
LVB2P
RXE2+
PB2
LVB0P
LVBCKP
LVA0P
PA2LVA3M
PA[0..9]4
PB[0..9]
RXO2+
LVBCKP
LVA0MLVA1M
LVA2M LVB2MLVB1M
LVA2P
PB5PB6
PA7
LVB2P
PA9
PA5
LVACKMPA4
RXO3+RXE0-
LVB1P
LVACKP
VLCD
PA0
LVB3P
PB8
C510
0.1uF
RXOC+
LVA3P
LVA2P
PA8
RXO2-
+C509
47uF/16V
LVA2M
RXO0+
RXO3-
LVA3MRXEC-
PA1
PB9
PA3
PB1
RXE1+
RXOC-
RXO1+
RXE3-
LVA1M
LVACKM
LVB3P
CN503
CONN
24681012141618202224
13579
11131517192123
PANEL INTERFACE D
MST8031 / MST8131 for AOCA
5 6Wednesday, April 14, 2004
Title
Size Document Number Rev
Date: Sheet of
LVA3P
LVB2M
LVA0M
VLCD 2
PB4
RXE0+
LVB0M
PB7
LVBCKM
RXO1-
C511
0.1uF
TSU16AK for AOC http:/
/www.w
jel.ne
t
AOC LM960
Page 23 of 54
Mute_keyC609
0.001uF
R615 10K 1/16W
R643NC
C616
1uF/25V
C611
1uF/25V
ENTER
C607
0.001uF
ST_DET13
onPANEL_5V/3.3V 2
R614 10K 1/16W
VCPU
LED_O
R642 0 1/16W
CSZ 4
AD2 4
LED_BLUE
R602
10K 1/16W
VCC12V
VCPU
OUT-L-
R626 10K 1/16W
C602 22pF
R635 100 1/16W
CN601
CONN
2468101214
13579
1113
DDC_DAT 3
R617
120 1/16W
SDA 4
AD1 4
RIGHT
LED_B
LED_G
R627 10K 1/16W R632
NC
ENTER
OUT-L-
R613
10K 1/16W
D601
LL4148-GS08
VCC5V
AUTO
R608 100 1/16W
R631
NC
VCC12V 2
R611 NC
INT4
LED_G
LED_O
C618
0.1uF
LEFT
FB602 600 OHM
SCL 4
Mute_key
POWER
R618
120 1/16W
+ C60310uF/16V
AUTO
DVI-DSUB SELECT
RIGHT
R612
NC
RN601
10K 1/16W
1 2 3 4
8 7 6 5
RN602
10K 1/16W
1 2 3 4
8 7 6 5
R638 NC
VCC5V 2,3,4
VCPU
Mute
C613
0.1uF
R605 10K 1/16W
LED_GRN
DDC_CLK 3
R641 NC
R601
10K 1/16W
LED_B
U601
W78E65P-40
35
21
20
10
1415
1617
23456789
4342414039383736
2425262728293031
1918
3233
1311
2244
12
EA/VP
XTAL1
XTAL2
RESET
INT0/P3.2INT1/P3.3
T0/P3.4T1/P3.5
P1.0P1.1P1.2P1.3P1.4P1.5P1.6P1.7
P0.0P0.1P0.2P0.3P0.4P0.5P0.6P0.7
P2.0P2.1P2.2P2.3P2.4P2.5P2.6P2.7
P3.7/RDP3.6/WR
PSENALE/P
P3.1/TXDP3.0/RXDVS
SVC
C
P4.3
R628
0 1/16W
VCPU
VCPU
AD0 4
C617
100pF Q602PMBS3906
32
1
OUT-L+
R603
10K 1/16W
Standby
VCPU
R633 NC
R6294.7K 1/16W
HWRESET 4
R637 470 1/16W
R621 470 1/16W
C601
0.1uF
R620 470 1/16W
OUT-R+ R630 NC
Q604NC3
2
1
AD3 4
LEFT
ResetCircuit
R609 100 1/16W
R623 470 1/16W
OUT-R-
OUT-R-
R616
4.7K 1/16W
X601
20MHz
FB603600 OHM
RXD 3
VCPU
OUT-L+
R624 470 1/16W
R604 10K 1/16W
C604 22pF
U602
AT24C16N-10SC-2.7
1234 5
678A0
A1A2GND SDA
SCLWP
VCC
Volume 4
R610 NC
DVI-DSUB SELECT
R622 470 1/16W
C606
0.001uF
U603 MAX810STR
1
23
GN
D
RSTVCC
R640NC
R634 100 1/16W
VCC5V
R625 10K 1/16W
R636 0 1/16W
C615
NC
C612
0.1uF
VCC5V
MPU D
MST8031 / MST8131 for AOCB
6 6Wednesday, July 21, 2004
Title
Size Document Number Rev
Date: Sheet of
C614
NC
FB601 600 OHM
CN602
CONN
246810121416
13579
111315
C605
0.22uF
C610
0.001uF
R639 100 1/16W
onBACKLITE 2
TXD 3
VCPU
Q603PMBS3906
32
1
POWER
LED_ORANGE
R606 10K 1/16W
VCPU2
Q601PMBS3906
32
1
OUT-R+
R607 10K 1/16W
CN603
NC
1234
1234
R619
4.7K 1/16W
VCPU
ST_DET23
C608
0.001uF
TSU16AK for AOC http:/
/www.w
jel.ne
t
AOC LM960
Page 27 of 55
8. LAYOUT 8.1 MAIN BOARD
715L1237-1-3
http:/
/www.w
jel.ne
t
AOC LM960
Page 28 of 55
8.2 POWER BOARD 715L1142-3AUE
8.3 KEY BOARD 715L1496-1-E
http:/
/www.w
jel.ne
t
AOC LM960
Page 29 of 55
9. Maintainability 9.1 Equipments and Tools Requirement
1. Voltmeter.
2. Oscilloscope.
3. Pattern Generator.
4. DDC Tool with an IBM Compatible Computer.
5. Alignment Tool.
6. LCD Color Analyzer.
7. Service Manual.
8. User Manual.
http:/
/www.w
jel.ne
t
AOC LM960
Page 30 of 55
9.2 TROUBLE SHOOTING
9.2.1 MAIN BOARD 1. NO SCREEN APPEAR
Note:1. If replace “MAIN-BOARD”, Please re-do “DDC-content” programmed & “WHITE-Balance”.
2. If replace “Power Board” only, Please re-do “ WHITE-Balance”
Led Green
Measured CN201 pin5/6 = 12V?
Measured CN201 pin 9/10= 5V?
Measured U202 pin 2= 3.3V?
Check Correspondent component.
Is there any shortage or cold solder?
Yes. There is OSD show Yes, all DC level exist
Disconnected the Signal cable (Loose the
Signal cable), Is the screen show “Cable Not
Connected”?
Connected the Signal cable again,
Check LED status.
Replace U601 Show noting
Connected the Signal cable
again
Check Power switch is in Power-on
status, and check if Power switch had
been stuck?
Led Orange
OK, Keyboard no
Led orange
Led Green
Check the Wire-Harness from CN503 Measured RGB (R301, R302, R303) H,V
Input at U401 pin 37,38 ,was there have
signal ?Check digital signal from CN302
Check Correspondent
component short/open
(Protection Diode)
NG
OK, Wire tight enough
Check Panel-Power Circuit Block
OK, Panel Power OK
Check U401 Data-output Block
Replace Power board and Check
Inverter control relative circuit
Re-do White balance adjust
OK, input Normal
Measured Crystal X401 (14.318MHz)
OK, clock normal
Replace U401 (TSU16AK)
OK
OK
http:/
/www.w
jel.ne
t
AOC LM960
Page 31 of 55
2. PANEL POWER CIRCUIT
NG
3. INVERTER CONTROL RELATIVE CIRCUIT
NG
Check the Bklt-On relative circuit, R201, Q201,
In normal operation, when LED =green,
Base of Q201 should =0 v,
In saving mode, when LED=orange,
Base of Q201 should =5 v,
OK
Replace Power board
& Re-do white balance
Measured the inverter connector
CN102
Pin1 on/off control=5V (on)
Pin2 PWM signal control dim 0V-5V
Replace U201
OK
Check R207 should have response from 0V to 5V
When we switch the power switch from off to on Measured X601 waveform is normal?
OK
Check Q204, Q203 is broken or CN503 solder abnormal?
Replace Q204, Q203 or re-solder CN503OK
NG
Replace U601
Replace X601
(20MHz)
Replace Panel
NG
NG
OK
http:/
/www.w
jel.ne
t
AOC LM960
Page 32 of 55
4. U4-DATA OUTPUT
Measured X401 waveform is
normal?
Check MST8011 (U401)
Signal output (PIN102-103, 106-113,118-125,128,1)
Is the waveform ok?
Replace X401(14.318MHz)
Check HS/VS input signal are normal?
OK
Replace U401
OK
OK
Check relative component NG
NG
Check relative circuit to panel
NG
http:/
/www.w
jel.ne
t
AOC LM960
Page 33 of 55
9.2.2 POWER/INVERTER BOARD No power
Press power key and look
if the picture is normal
Please reinsert and make sure
the AC of 100-240 is normal
Measure U201 PIN2=2.5V
U202 PIN2=3.3V
Reinsert or check the power section
Check Correspondent component.
Replace U401
Replace U601
Replace X401, X601
OK
OK
OK
NG
NG
NG
NG
No power
NG
X401 and X601 oscillate
waveforms are normal
http:/
/www.w
jel.ne
t
AOC LM960
Page 34 of 55
No picture (LED orange)
No picture
The button if under control
Replace U601
Check Correspondent component.
Measure U202 PIN2=3.3V
U201 PIN2=2.5V
Check Correspondent component
Replace U401
X401 oscillate waveform is
normal
Check Correspondent component
OK
OK
OK
OK
NG
NG
NG
NG X601 oscillate waveform is
normal
http:/
/www.w
jel.ne
t
AOC LM960
Page 35 of 55
9.2.3 KEYPAD BOARD
OSD is unstable or not working
Is Key Pad Board connecting normally? Connect Key Pad Board
Is Button Switch normally? Replace Button Switch
Y
N
N
Is Key Pad Board normally? Replace Key Pad Board
Y
N
Y
Check Main Board
http:/
/www.w
jel.ne
t
AOC LM960
Page 36 of 55
10. WHITE- BALANCE, LUMINANCE ADJUSTMENT Approximately 30 minutes should be allowed for warm up before proceeding White-Balance adjustment.
1. How to do the Chroma-7120 MEM. Channel setting
A. Reference to chroma 7120 user guide
B. Use “ SC” key and “ NEXT” key to modify XyY value and use “ID” key to modify the
TEXT description Following is the procedure to do white-balance adjust
2. Setting the color temp. you want
A. MEM.CHANNEL 3 (7800 color):
7800 color temp. parameter is x = 296 ±20, y = 311 ±20, Y = 180 cd/m2 ,
B. MEM.CHANNEL 4 (6500 color):
6500 color temp. parameter is x = 313±20, y = 329 ±20, Y = 180 cd/m2
3. Into factory mode of LM960
Press MENU button during 2 seconds along with press Power button will activate the factory mode, then MCU will
do AUTO LEVEL automatically. Meanwhile press MENU the OSD screen will be located at LEFT TOP OF PANEL.
4. Bias adjustment:
Set the Contrast to 50; Adjust the Brightness to 80.
5. Gain adjustment:
Move cursor to “-F-” and press MENU key
A. Adjust C2 (7800) color-temperature
1. Switch the Chroma-7120 to RGB-Mode (with press “MODE” button)
2. Switch the MEM. Channel to Channel 3 (with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 296 ±20, y = 311 ±20, Y = 180 cd/m2
4. Adjust the RED of color1 on factory window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN of color1 on factory window until chroma 7120 indicator reached the value G=100
6. Adjust the BLUE of color1 on factory window until chroma 7120 indicator reached the value B=100
7. Repeat above procedure (item 4,5,6) until chroma 7120 RGB value meet the tolerance =100±2
B. Adjust C1 (6500) color-temperature
1. Switch the chroma-7120 to RGB-Mode (with press “MODE” button)
2. Switch the MEM.channel to Channel 4(with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 313 ±20, y = 329 ±20, Y = 180 cd/m2
4. Adjust the RED of color3 on factory window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN of color3 on factory window until chroma 7120 indicator reachedthe value G=100
6. Adjust the BLUE of color3 on factory window until chroma 7120 indicator reached the value B=100
7. Repeat above procedure (item 4,5,6) until chroma 7120 RGB value meet the tolerance =100±2
C. Turn the Power-button off to quit from factory mode.
http:/
/www.w
jel.ne
t
AOC LM960
Page 37 of 55
11. CHECK LIST AFTER REPLACING LCD MAIN BOARD Check if white-balance is within the specs after replacing Main board and panel,
then re-writing DDC is necessary.
11.1 THE WHITE-BALANCE VALUE FOR EACH COMMON COLOR TEMPERATURE: C1/ 6500 º K:（warm color）x = 313±20 ; y = 329±20;
C2/ 7800 º K:（cool color） x = 296±20 ; y = 311±20;
Remark: The value of Y should be confirmed according to different customers. If Customer is AOC so that it’s
required to be larger than 170cd/cm2 (Center). The exact brightness values are confirmed by the
checking-regulations of different customers and different models.
11.2 STEPSOF WHITE-BALANCE ADJUSTMENT FOR LCD:( example for 17” AOC LCD) 1. Required instruments: Chroma7120、Chroma2325（BGA265A）。
2. First connect the instruments together and turn on the LCD power, then warm up for 30 minutes under full
white screen mode. First press the “Reset” key in the menu to recover factory set as following.
3. Set Chroma2325 at round-windows mode and make the detecting-head of Chroma7120 aim at the cross in
the middle, the distance between the detecting-head and the cross is 20cm.
4. Set Chroma2325（BGA265A）to be T144（1280*1024/60HZ）and P105 of full white screen. Test if the
white-balance value is within the specs. Please follow the steps below to adjust if it is beyond the specs.
5. Cut the power. Then press MENU key and supply power at the same time to enter into the factory mode.
See the following pictures.
6. Test white-balance again after Auto Level. Adjustment with hand is necessary if it is beyond the specs just
the same.
Select“F”，then
Select AUTO LEVEL
item
http:/
/www.w
jel.ne
t
AOC LM960
Page 38 of 55
7. Select 7x00 item to adjust cool color-temperature and select 6x00 to adjust warm color- temperature. It can
reach to the best effect through adjusting R/G/B value if it inclines to green or blue.
8. Select Exit to the upper menu after completing the adjustment. Then press POWER OFF to exit and save it.
11.3 STEPS FOR WRITING DDC：
1. Employ PC, and connect the DDC-writing instrument and the instrument that is ready for writing into DDC to
the power of 12v. Connect the signal cable of the latter to D-USB or DVI of DDC-writing instrument (The data-writing
of monitor needs transfer-interface) and link the DDC-writing instrument with PC through printer interface. (See the
schematic picture below)
2. Seek the document with the expanded name of .BAT in DDC file of this model. It appears the indication of
“Input Serial No.：”after dual-click the document to be ready for DDC-writing.
3.Input the serial number of the product (For instance: AOC LM729 is 13 bits), then press ENTER to start
writing
4.Check the indication of DDC-writing program at the end. When you see the picture as the schematic picture
above, the “Data compare OK!” means being written well and that’s the end. Please check if the
Manufacturer Name, Vendor Assigned Code, Monitor Name, Serial Number, Week of Manufacture, Year of
Manufacture are right. It will appear “Data compare error ！” to indicate failure if the DDC-writing doesn’t
Connection of DDC-writing instrument for VGA.
http:/
/www.w
jel.ne
t
AOC LM960
Page 39 of 55
perform well. Please check the power resource and the connection of the signal cable, then return to step 3 by
pressing ENTER and re-do it.
5.You can exit the program by pressing Ctrl plus C, then cut the signal cable and the power.
6.The following picture is taking Acer AL1721 EDID for example.
Notes:
1、Make sure the system time of PC is in accordance with the real time before writing.
2、The schematic picture is just as an example for description, the exact content of the DDC is dependent on
the serial number of the BARCORD of this model.
3、Data DDC-writing needs a transfer interface.
Instruction：DDC-writing needs 4 files: 1. Barcode.txt (Supply Barcode length and flow number)
2. *.EXE (DDC-writing program)
3. WR.bat (Group order file for cycling utilization of *EXE, and dual-click this file when perform
DDC-writing)
4. w.dat The content with 128 bits of DDC
http:/
/www.w
jel.ne
t
AOC LM960
Page 40 of 55
12. EDID 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
0: 00 FF FF FF FF FF FF 00 05 E3 85 A9 A4 F4 0E 00
16: 19 0F 01 03 68 26 1E 78 2A 6D 65 A2 5A 4C 9D 23
32: 13 4F 54 BF EF 00 81 80 01 01 01 01 01 01 01 01
48: 01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70
64: 13 00 78 2D 11 00 00 1E 00 00 00 FF 00 32 31 33
80: 36 35 34 37 39 38 30 31 33 32 00 00 00 FD 00 37
96: 4B 1E 53 0E 00 0A 20 20 20 20 20 20 00 00 00 FC
112: 00 4C 4D 39 36 30 0A 20 20 20 20 20 20 20 00 C7
http:/
/www.w
jel.ne
t
AOC LM960
Page 41 of 55
13. BOM LIST T980KH4HK4ACN
Part NO for TPV Description Quantity Unit
M1G 330 6 47 SCREW 4 PCS
CBPC980KH4A5 CONVERSION BOARD 1 PCS
KEPC980KE1 KEY BOARD 1 PCS
PWPC1942HSE2 POWER BOARD 1 PCS
15G6207 L 2 PANEL BRACKET 1 PCS
15G6207 R 2 PANEL BRACKET 1 PCS
26G 800504 7 (for LM960) BARCODE 1 PCS
26G 800504 7 (for LM960S) BARCODE 1 PCS
26G 800673 1A (for EN9600) ENVISION BARCODE LABEL 1 PCS
33G4695 1 C CLAMP 1 PCS
40G 19N615 2A (for LM960) ID LABEL 1 PCS
40G 19N615 1A (for LM960S) ID LABEL 1 PCS
40G 19N673 1A (for EN9600) ID LABEL 1 PCS
40G 457786 3A (for LM960) TCO99 LABEL 1 PCS
40G 457786 3A (for LM960S) TCO99 LABEL 1 PCS
40G 459673 5A (for EN9600) LABEL 1 PCS
40G 58162435A LABEL 1 PCS
41G 68615 4B TCO'99 CARD 1 PCS
41G190061521B (for LM960) MANUAL 1 PCS
41G190061521B (for LM960S) MANUAL 1 PCS
41G1900673 2B (for EN9600) MANUAL 1 PCS
41G780061513B INPUT NOT SUPPORT CARD 1 PCS
41G780061518B (for LM960) EASE PROGRAM 1 PCS
41G780061519B (for LM960S) EASE CANADA 1 PCS
41G780061532C (for LM960) SA CENTER LIST 1 PCS
41G780061532C (for LM960S) SA CENTER LIST 1 PCS
41G780061541A (for LM960) AOC-Kensington Card 1 PCS
41G780061545B (for LM960) WARRANTY BOOKLET 1 PCS
41G780061545B (for LM960S) WARRANTY BOOKLET 1 PCS
41G780067320C (for EN9600) WARRANTY BOOKLET 1 PCS
41G780067329D (for EN9600) Warranty card 1 PCS
41G780067330B (for EN9600) Envision -kensington Card 1 PCS
44G3231 15600 EVA WASHER 1 PCS
44G3910615 3A (for LM960) CARTON 1 PCS
44G3910615 4A (for LM960S) CARTON 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 42 of 55
44G3910673 1A (for EN9600) CARTON 1 PCS
44G3928 1 EPS 1 PCS
44G3928 2 EPS 1 PCS
45G 88609 C (for LM960S) EPE COVER 1 PCS
45G 88609 C (for EN9600) EPE COVER 1 PCS
45G 76 28 C PE Bag For Manual 1 PCS
45G 88606 C PE BAG FOR BASE 1 PCS
45G 88626 1 PE BAG FOR MONITOR 1 PCS
50G 600 2 HANDLE1 1 PCS
50G 600 3 HANDLE2 1 PCS
52G 1185 MIDDLE TAPE FOR CARTON 58 CM
52G 1186 SMALL TAPE 8 CM
52G 1207 A ALUMINIUM TAPE 2 PCS
52G6020 5 PROTECT FILM 1 PCS
52G6025 11925 MYLAR 1 PCS
85G6119 4 SHIELD 1 PCS
89G402A15N LS POWER CORD 1 PCS
95G8014 16591 KEY HARNESS 1 PCS
95G8018 30634 LVDS 1 PCS
M1G 130 8128 SCREW M3X8 4 PCS
M1G 330 6128 SCREW 4 PCS
M1G1140 6128 SCREW 4X6 1 PCS
M1G1730 6128 SCREW M3x6 7 PCS
Q1G 330 6128 SCREW 4 PCS
Q1G1030 8128 SCREW 4 PCS
705L980KB34139 19" LCD COVER ASS'Y 1 PCS
705L980KF34014 (for LM960) 19" LCD COVER ASS'Y 1 PCS
705L980KF34010 (for LM960S) 19" LCD COVER ASS'Y 1 PCS
705L980KF34015 (for EN9600) 19" LCD COVER ASS'Y 1 PCS
705L980KP34019 19" LCD COVER ASS'Y 1 PCS
750LLH90E12 1 HSD 19" A02 PANEL 1 PCS
AM1G1740 12 47 SCREW 4 PCS
89G 715LAA D SIGNAL CABLE 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 43 of 55
PART LIST FOR MAIN BOARD
Location Part NO for TPV Description Quantity Units
AIC980KH4A5 MAIN BOARD 1 PCS
40G 45762412B CBPC LABEL 1 PCS
C204 67G215B221 4H LOW E.S.R 220UF +-20% 2 1 PCS
CN201 33G8027 12 WAFER 2*6P 2.0MM R/A 1 PCS
CN301 88G 35315F H D-SUB 15PIN 1 PCS
CN503 33G802724B H WAFER 1 PCS
CN602 33G8027 16 WAFER 16PIN 2.0mm DIP 1 PCS
X401 93G 22 53 J 14.31818MHZ/32PF/49US 1 PCS
X601 93G 22 55 J 20MHz/20PF/49US 1 PCS
40G 457624 1B LABEL-CPU 1 PCS
715L1237 1 3 MAIN BOARD 1 PCS
C201 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C205 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C206 65G0805105 22 CHIP 1UF 25V X7R 0805 1 PCS
C207 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C210 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C212 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C214 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C216 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C217 65G0603683 32 CHIP 0.068UF 50L X7R 1 PCS
C304 65G0603473 32 CHIP 0.047UF 50V X7R 1 PCS
C305 65G0603473 32 CHIP 0.047UF 50V X7R 1 PCS
C306 65G0603473 32 CHIP 0.047UF 50V X7R 1 PCS
C307 65G0603102 32 1000PF +-10% 50V X7R 1 PCS
C308 65G0603473 32 CHIP 0.047UF 50V X7R 1 PCS
C309 65G0603473 32 CHIP 0.047UF 50V X7R 1 PCS
C310 65G0603473 32 CHIP 0.047UF 50V X7R 1 PCS
C311 65G0603330 31 CER1 0603 NP0 50V 33P P 1 PCS
C312 65G0603221 31 CER1 0603 NP0 50V 220P 1 PCS
C313 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C401 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C402 65G0603220 31 CER1 0603 NP0 50V 22P P 1 PCS
C403 65G0603220 31 CER1 0603 NP0 50V 22P P 1 PCS
C404 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C406 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C407 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 44 of 55
C408 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C409 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C410 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C411 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C412 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C413 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C415 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C416 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C417 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C418 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C420 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C421 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C423 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C425 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C426 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C428 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C510 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C511 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C601 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C602 65G0603220 31 CER1 0603 NP0 50V 22P P 1 PCS
C604 65G0603220 31 CER1 0603 NP0 50V 22P P 1 PCS
C605 65G0603224 17 CAP:CER 0.22UF-20%-80% 1 PCS
C606 65G0603102 32 1000PF +-10% 50V X7R 1 PCS
C607 65G0603102 32 1000PF +-10% 50V X7R 1 PCS
C608 65G0603102 32 1000PF +-10% 50V X7R 1 PCS
C609 65G0603102 32 1000PF +-10% 50V X7R 1 PCS
C610 65G0603102 32 1000PF +-10% 50V X7R 1 PCS
C618 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
D201 93G1004 3 SS14 1 PCS
D202 93G1020 1 S GS1D 1 PCS
D301 93G 6433P BAV99 1 PCS
D302 93G 6433P BAV99 1 PCS
D303 93G 6433P BAV99 1 PCS
D304 93G 64 42 P BAV70 SOT-23 1 PCS
D317 93G 39147 TZMC5V6 1 PCS
D318 93G 39147 TZMC5V6 1 PCS
D319 93G 39147 TZMC5V6 1 PCS
D320 93G 39147 TZMC5V6 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 45 of 55
D321 93G 39147 TZMC5V6 1 PCS
D322 93G 39147 TZMC5V6 1 PCS
D323 93G 39147 TZMC5V6 1 PCS
D601 93G 6432V LL4148-GS08 1 PCS
FB201 71G 56Z601 CHIP BEAD 600 OHM 0805 1 PCS
FB301 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS
FB302 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS
FB303 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS
FB304 71G 56G151 A TB160808G151 1 PCS
FB401 71G 56Z601 CHIP BEAD 600 OHM 0805 1 PCS
FB402 71G 56Z601 CHIP BEAD 600 OHM 0805 1 PCS
FB403 71G 56Z601 CHIP BEAD 600 OHM 0805 1 PCS
FB404 71G 56Z601 CHIP BEAD 600 OHM 0805 1 PCS
FB405 71G 56Z601 CHIP BEAD 600 OHM 0805 1 PCS
FB406 71G 56Z601 CHIP BEAD 600 OHM 0805 1 PCS
Q201 57G 417 4 PMBS3904/PHILIPS-SMT(04 1 PCS
Q202 57G 417 4 PMBS3904/PHILIPS-SMT(04 1 PCS
Q203 57G 763 1 A03401 SOT23 BY AOS(A1) 1 PCS
Q204 57G 417 4 PMBS3904/PHILIPS-SMT(04 1 PCS
Q601 57G 417 6 PMBS3906/PHILIPS-SMT(06 1 PCS
Q602 57G 417 6 PMBS3906/PHILIPS-SMT(06 1 PCS
R201 61L0603472 RST SM 0603 RC0603 4K7 1 PCS
R202 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R203 61L0603102 RST SM 0603 RC0603 1K P 1 PCS
R204 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R205 61L0603472 RST SM 0603 RC0603 4K7 1 PCS
R206 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R207 61L0603472 RST SM 0603 RC0603 4K7 1 PCS
R208 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R209 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS
R211 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R212 61L0603472 RST SM 0603 RC0603 4K7 1 PCS
R215 61L0603104 RST SM 0603 RC0603 100K 1 PCS
R301 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R302 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R303 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R304 61L0603471 CHIPR 470 OHM+-5% 1/10W 1 PCS
R305 61L0603101 RST SM 0603 RC0603 100R 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 46 of 55
R306 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R307 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R308 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R309 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R310 61L0603102 RST SM 0603 RC0603 1K P 1 PCS
R311 61L0603102 RST SM 0603 RC0603 1K P 1 PCS
R312 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R313 61L0603222 RST SM 0603 RC0603 2K2 1 PCS
R314 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R315 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R316 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R317 61L0603472 RST SM 0603 RC0603 4K7 1 PCS
R318 61L0603472 RST SM 0603 RC0603 4K7 1 PCS
R325 61L0603750 RST SM 0603 RC22H 75R P 1 PCS
R326 61L0603750 RST SM 0603 RC22H 75R P 1 PCS
R327 61L0603750 RST SM 0603 RC22H 75R P 1 PCS
R402 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R403 61L0603390 0F CHIP 390 OHM 1/10W 1% 1 PCS
R404 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R405 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R406 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R407 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R502 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS
R601 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R602 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R604 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R605 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R606 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R607 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R608 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R609 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R613 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R614 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R615 61L0603103 RST SM 0603 RC0603 10K 1 PCS
R616 61L0603472 RST SM 0603 RC0603 4K7 1 PCS
R617 61L0603121 CHIPR 120 OHM 1/10W 1 PCS
R618 61L0603121 CHIPR 120 OHM 1/10W 1 PCS
R619 61L0603472 RST SM 0603 RC0603 4K7 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 47 of 55
R620 61L0603471 CHIPR 470 OHM+-5% 1/10W 1 PCS
R621 61L0603471 CHIPR 470 OHM+-5% 1/10W 1 PCS
R622 61L0603471 CHIPR 470 OHM+-5% 1/10W 1 PCS
R623 61L0603471 CHIPR 470 OHM+-5% 1/10W 1 PCS
R624 61L0603102 RST SM 0603 RC0603 1K P 1 PCS
R634 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R635 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R636 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R639 61L0603101 RST SM 0603 RC0603 100R 1 PCS
RN601 61L 125472 8 CHIP AR 8P4R 4.7K OHM+- 1 PCS
RN602 61L 125472 8 CHIP AR 8P4R 4.7K OHM+- 1 PCS
U201 56G 563 31 AI1117D-1.8-EI 1 PCS
U202 56G 563 7 AIC1084-33PM 1 PCS
U301 56G1133 34 M24C02-WMN6TP 1 PCS
U401 56G 562 86 TSU16AK PQFP-128 BY MST 1 PCS
U601 56G1125137HTH W78E65P-40 1 PCS
U602 56G113356A 24LC16B/SNG SOIC-8PIN 1 PCS
U603 56G 643 5A MAX810 STRG 1 PCS
PART LIST FOR KEY BOARD
http:/
/www.w
jel.ne
t
AOC LM960
Page 48 of 55
Location Part NO for TPV Description Quantity Unit
AIK980KA4AC MAIN BAORD 1 PCS
CN001 33G8027 12 H PIN HEADER 2*6 R/A 1 PCS
DP101 81G 12 2 GP GP36032ME/50-ZO 1 PCS
SW001 77L 600 1GHJ KEY SWITCH 1 PCS
SW002 77L 600 1GHJ KEY SWITCH 1 PCS
SW003 77L 600 1GHJ KEY SWITCH 1 PCS
SW004 77L 600 1GHJ KEY SWITCH 1 PCS
SW005 77L 600 1GHJ KEY SWITCH 1 PCS
715L1496 1 E KEY BOARD 1 PCS
PART LIST FOR POWER BOARD
http:/
/www.w
jel.ne
t
AOC LM960
Page 49 of 55
Location Part NO for TPV Description Quantity Unit
705L 980 65 02 19" C901 ASS'Y 1 PCS
PW1942HSE2SMT POWER BOARD FOR SMT 1 PCS
40G 45762412B CBPC LABEL 1.03 PCS
52G 1174 TYPE 4 CM
705L 560 61 06 R903 ASS'Y 1 PCS
705L 780 57 14 Q901 ASS'Y 1 PCS
705L 980 61 02 R914 ASS'Y 1 PCS
705L 980 61 03 NR901 ASS'Y 1 PCS
705L 980 87 01 CN901 ASS'Y 1 PCS
705L 980 93 03 D910,D911 ASS'Y 1 PCS
705L 980 95 01 J041 ASS'Y 1 PCS
BD901 93G 50460 16 U4KB80R 1 PCS
C103 67G215L102 3R LOW E.S.R 1000UF +/-20% 1 PCS
C215 65L 3J2206ET 22PF 5% 3KV TDK 1 PCS
C216 65L 3J2206ET 22PF 5% 3KV TDK 1 PCS
C217 65L 3J2206ET 22PF 5% 3KV TDK 1 PCS
C218 65L 3J2206ET 22PF 5% 3KV TDK 1 PCS
C902 65G305M1022EM Y2 1000PF +-20% 250VAC 1 PCS
C903 63G107K474 US 0.47UF +-10% 1 PCS
C904 63G 10722410M 0.22 UF 250VAC 1 PCS
C905 67G305S15114K 105尼ん 150UF +-20% 4 1 PCS
C906 65G 2K152 5E6921 1500 PF 10% 2KV Y5P 1 PCS
C914 67G215L102 3R LOW E.S.R 1000UF +/-20% 1 PCS
C915 67G215L102 3R LOW E.S.R 1000UF +/-20% 1 PCS
C921 65G306M4722BP 4700PF +-20% 400VAC 1 PCS
C950 65G306M3322BP 3300PF 20% 1 PCS
CN201 33G8021 2D AC CONN.2P R/A 87210-0236 1 PCS
CN202 33G8021 2D AC CONN.2P R/A 87210-0236 1 PCS
CN204 33G8021 2D AC CONN.2P R/A 87210-0236 1 PCS
CN205 33G8021 2D AC CONN.2P R/A 87210-0236 1 PCS
CN902 95G8021 12509 WIRE HARNESS 1 PCS
D901 93G 6026T52T RECTIFIER DIODE FR107 1 PCS
D902 93G 6038P52T PS102R 1 PCS
F901 84G 7H200 SL 250V/2A LIHEL FUSE 1 PCS
IC902 56G 139 3A PC123Y22FZOF 1 PCS
L101 73G 253152 T CHOKE COIL TDK LSHAOO3C 1 PCS
L201 73G 253139 HA CHOKE COIL 1 PCS
L202 73G 253139 HA CHOKE COIL 1 PCS
L203 73G 174 35YSA FILTER 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 50 of 55
L204 73G 174 35YSA FILTER 1 PCS
L901 73L 174 29LSH LINE FILTER 1 PCS
L903 73G 253 91 LS CHOKE BY LI SHIN 1 PCS
PT201 80LL19T 1DNH TRANSFORMER 1 PCS
PT202 80LL19T 1DNH TRANSFORMER 1 PCS
Q209 57G 761 7 KTD1691P 1 PCS
Q210 57G 761 7 KTD1691P 1 PCS
Q211 57G 761 7 KTD1691P 1 PCS
Q212 57G 761 7 KTD1691P 1 PCS
R224 61G 208102 64 1KOHM 5% 1W 1 PCS
R226 61G 208102 64 1KOHM 5% 1W 1 PCS
R228 61G 208102 64 1KOHM 5% 1W 1 PCS
R230 61G 208102 64 1KOHM 5% 1W 1 PCS
T901 80LL19T 3 TG TRANSFORMER 1 PCS
C901 65G305M3322BP 3300PF 250VAC/400VAC 1 PCS
PWPC1942HSE2AI POWER BOARD FOR AI 1 PCS
C102 65G0805104 32 CHIP 0.1U 50V X7R 1 PCS
C107 65G0805104 32 CHIP 0.1U 50V X7R 1 PCS
C112 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C114 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C115 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS
C202 65G0805104 22 0.1UF +-10% 25V X7R 080 1 PCS
C203 65G0805105 27 CHIP 1UF Y5V 0805 1 PCS
C209 65G0805105 27 CHIP 1UF Y5V 0805 1 PCS
C210 65G0805105 27 CHIP 1UF Y5V 0805 1 PCS
C211 65G0805105 27 CHIP 1UF Y5V 0805 1 PCS
C212 65G0805105 27 CHIP 1UF Y5V 0805 1 PCS
C219 65G0805105 27 CHIP 1UF Y5V 0805 1 PCS
C220 65G0805105 27 CHIP 1UF Y5V 0805 1 PCS
C224 65G0805105 27 CHIP 1UF Y5V 0805 1 PCS
C225 65G0805105 27 CHIP 1UF Y5V 0805 1 PCS
C908 65G0805104 32 CHIP 0.1U 50V X7R 1 PCS
C910 65G0805102 31 1000PF 50V NPO 1 PCS
C911 65G0805104 32 CHIP 0.1U 50V X7R 1 PCS
C912 65G0805104 32 CHIP 0.1U 50V X7R 1 PCS
C913 65G1206102 72 CHIP 1000PF 500V X7R 1 PCS
C917 65G0805104 32 CHIP 0.1U 50V X7R 1 PCS
C918 65G0805104 32 CHIP 0.1U 50V X7R 1 PCS
C922 65G0805102 32 CHIP 1000P 50VX7R 0805 1 PCS
D101 93G3004 2 SR34 PAN JIT 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 51 of 55
D201 93G2004 2A SM240A DO-214AC 1 PCS
D202 93G2004 2A SM240A DO-214AC 1 PCS
D203 93G 39S 3 T BZT52-C11 1 PCS
D204 93G 39S 3 T BZT52-C11 1 PCS
D903 93G 6432V LL4148-GS08 1 PCS
F902 61L1206000 4 0 OHM 4A 1/4W 1 PCS
IC101 56G 379 37 FP5001DR 1 PCS
IC901 56G 379 33 SG6841SZ 1 PCS
Q101 57G 763 3 AO4411 SO-8 1 PCS
Q102 57G 417 4 PMBS3904/PHILIPS-SMT(04 1 PCS
Q103 57G 417 6 PMBS3906/PHILIPS-SMT(06 1 PCS
Q201 57G 760 5 DTC144WKA BY ROHM SMT 1 PCS
Q202 57G 760 4 DTA144WKA BY ROHM SMT 1 PCS
Q203 57G 763 3 AO4411 SO-8 1 PCS
Q204 57G 763 3 AO4411 SO-8 1 PCS
Q205 57G 417 4 PMBS3904/PHILIPS-SMT(04 1 PCS
Q206 57G 417 4 PMBS3904/PHILIPS-SMT(04 1 PCS
Q207 57G 417 6 PMBS3906/PHILIPS-SMT(06 1 PCS
Q208 57G 417 6 PMBS3906/PHILIPS-SMT(06 1 PCS
Q902 57G 417 4 PMBS3904/PHILIPS-SMT(04 1 PCS
Q903 57G 417 6 PMBS3906/PHILIPS-SMT(06 1 PCS
R106 61L0603333 CHIP 33K OHM 1/10W 1 PCS
R107 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS
R108 61L0603473 RST SM 0603 RC0603 47K 1 PCS
R109 61L0603302 CHIPR 3K OHM +-5% 1/10W 1 PCS
R110 61L0603360 1F CHIP 3.6KOHM 1% 1/10W 1 PCS
R113 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R114 61L0603102 RST SM 0603 RC0603 1K P 1 PCS
R115 61L0603220 RST SM 0603 RC0603 22R 1 PCS
R116 61L0603332 CHIP 3.3K OHM 1/10W 1 PCS
R208 61L0603472 RST SM 0603 RC0603 4K7 1 PCS
R209 61L0603472 RST SM 0603 RC0603 4K7 1 PCS
R212 61L0603392 CHIP 3.9K OHM 1/10W 1 PCS
R213 61L0603392 CHIP 3.9K OHM 1/10W 1 PCS
R215 61L0603222 RST SM 0603 RC0603 2K2 1 PCS
R216 61L0603221 RST SM 0603 RC0603 220R 1 PCS
R217 61L0603221 RST SM 0603 RC0603 220R 1 PCS
R218 61L0603101 RST SM 0603 RC0603 100R 1 PCS
R243 61L0603102 RST SM 0603 RC0603 1K P 1 PCS
R244 61L0603102 RST SM 0603 RC0603 1K P 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 52 of 55
R901 61L1206105 CHIP 1MOHM 5% 1/4W 1 PCS
R902 61L1206105 CHIP 1MOHM 5% 1/4W 1 PCS
R904 61L1206105 CHIP 1MOHM 5% 1/4W 1 PCS
R905 61L1206105 CHIP 1MOHM 5% 1/4W 1 PCS
R906 61L1206105 CHIP 1MOHM 5% 1/4W 1 PCS
R908 61L1206519 CHIPR 5.1OHM +-5% 1/4W 1 PCS
R910 61L1206000 RST SM 1206 JUMP MAX 0R 1 PCS
R911 61L0805240 2F CHIP 24KOHM 1% 1/8W 1 PCS
R912 61L0805203 CHIPR 20KOHM +-5% 1/8W 1 PCS
R916 61L0805472 CHIRP 4.7K OHM +-5% 1/8 1 PCS
R917 61L0805101 CHIPR 100 OHM +-5% 1/8W 1 PCS
R918 61L0805472 CHIRP 4.7K OHM +-5% 1/8 1 PCS
R919 61L1206470 CHIP 47OHM 5% 1/4W 1 PCS
R920 61L1206470 CHIP 47OHM 5% 1/4W 1 PCS
R921 61L1206471 CHIPR 470 OHM+-5% 1/4W 1 PCS
R922 61L0805102 CHIPR 1K OHM +-5% 1/8W 1 PCS
R923 61L0805000 CHIP O OHM 1/8W 1 PCS
R924 61L0805102 CHIPR 1K OHM +-5% 1/8W 1 PCS
R925 61L0805102 CHIPR 1K OHM +-5% 1/8W 1 PCS
R926 61L0805931 1F CHIP 9.31K OHM 1/8W 1% 1 PCS
R927 61L0805243 1F CHIP 2.43K OHM 1/8W 1% 1 PCS
U201 56G 622 1 BA9741F-SMT 1 PCS
ZD901 93G 39S 12 T RLZ20B LLDS 1 PCS
ZD902 93G 39S 17 T RLZ12B LLDS 1 PCS
715L1142 3AUE PCB 1 PCS
C101 67G215B4713KT LOW ESR 470UF16V BY HER 1 PCS
C106 67G215B4713KT LOW ESR 470UF16V BY HER 1 PCS
C108 67G215B4713KT LOW ESR 470UF16V BY HER 1 PCS
C201 67G 2152213KT 220UF 16V 1 PCS
C204 65G 450104 7T 0.1UF +80-20% 50V Y5V 1 PCS
C205 65G 450104 7T 0.1UF +80-20% 50V Y5V 1 PCS
C206 65G 450104 7T 0.1UF +80-20% 50V Y5V 1 PCS
C208 65G 44233113T 330PJNPO 50V 1 PCS
C221 64G701J4740AT 0.47uF 50V 1 PCS
C222 64G701J4740AT 0.47uF 50V 1 PCS
C223 67G 2152213KT 220UF 16V 1 PCS
C905 6G 31502 1.5MM RIVET 2 PCS
C916 67G215B4713KT LOW ESR 470UF16V BY HER 1 PCS
CN901 6G 31500 EYELET 2 PCS
D205 93G 64 1152T 1N4148 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 53 of 55
D206 93G 64 1152T 1N4148 1 PCS
D207 93G 64 1152T 1N4148 1 PCS
D208 93G 64 1152T 1N4148 1 PCS
D209 93G 64 1152T 1N4148 1 PCS
D210 93G 64 1152T 1N4148 1 PCS
FB101 71G 55 29 FERRITE BEAD 1 PCS
FB901 71G 55 29 FERRITE BEAD 1 PCS
IC903 56G 158 4 T A H431BA 1 PCS
L901 6G 31502 1.5MM RIVET 4 PCS
L902 6G 31502 1.5MM RIVET 4 PCS
NR901 6G 31502 1.5MM RIVET 2 PCS
PT201 6G 31502 1.5MM RIVET 2 PCS
PT202 6G 31502 1.5MM RIVET 2 PCS
R111 61G 21015352T 15KOHM 1% 1/6W 1 PCS
R112 61G 60227252T 2.7KOHM 5% 1/6W 1 PCS
R201 61G 60220352T CFR 20K OHM+-5% 1/6W 1 PCS
R202 61G 60210352T CFR 10KOHM +-5% 1/6W 1 PCS
R203 61G 60210352T CFR 10KOHM +-5% 1/6W 1 PCS
R204 61G 60210352T CFR 10KOHM +-5% 1/6W 1 PCS
R205 61G 60247352T 47KOHM 5% 1/6W 1 PCS
R206 61G 60247352T 47KOHM 5% 1/6W 1 PCS
R210 61G 60215352T 15KOHM 5% 1/6W 1 PCS
R211 61G 60215352T 15KOHM 5% 1/6W 1 PCS
R214 61G 60222252T 2.2K 5% 1/6W 1 PCS
R219 61G 60210152T 100OHM +- 5% 1/6W 1 PCS
R220 61G 60215352T 15KOHM 5% 1/6W 1 PCS
R221 61G 60215352T 15KOHM 5% 1/6W 1 PCS
R222 61G 60212352T 12KOHM 5% 1/6W 1 PCS
R223 61G 60212352T 12KOHM 5% 1/6W 1 PCS
R232 61G 60291152T CFR 910 OHM+-5% 1/6W 1 PCS
R233 61G 60291152T CFR 910 OHM+-5% 1/6W 1 PCS
R234 61G 17291152T 910OHM +-5% 1/4W 1 PCS
R235 61G 17291152T 910OHM +-5% 1/4W 1 PCS
R236 61G 60268152T 680 OHM 5% 1/6W 1 PCS
R237 61G 60268152T 680 OHM 5% 1/6W 1 PCS
R238 61G 60212352T 12KOHM 5% 1/6W 1 PCS
R239 61G 60212352T 12KOHM 5% 1/6W 1 PCS
R240 61G 60251352T 51KOHM +-5% 1/6W 1 PCS
R241 61G 60251352T 51KOHM +-5% 1/6W 1 PCS
R907 61L214Y10552T 1M,1/4W 1 PCS
http:/
/www.w
jel.ne
t
AOC LM960
Page 54 of 55
R909 61G 17247052T 47OHM 5% 1/4W 1 PCS
R913 61G 17220352T 20KOHM 5% 1/4W 1 PCS
R915 61G 17230352T 30K OHM5%1/4W 1 PCS
T901 6G 31502 1.5MM RIVET 4 PCS
96G 29 10 H.S.TUBE 1 PCS
R903 61G152M10458F 100K OHM 5% 2W 1 PCS
90G 415 1 HEATSHINK FOR Q901 1 PCS
M1G1730 8128 SCREW M3x8 1 PCS
Q901 57G 724 4A STP9NK60ZEP 1 PCS
96G 29 6 SHRINK TUBE UL/CSA 1 PCS
R914 61G 2J22858H 0.22OHM 2W +-5% 1 PCS
NR901 61G 58050 WT NTC 5 OHM 5A 1 PCS
95G 900 42 WIRE HARNESS 1 PCS
96G 29 6 SHRINK TUBE UL/CSA 1 PCS
CN901 87G 501 19 RF AC SOCKET 1 PCS
90G6081500 HEAT SINK 1 PCS
M1G1730 8128 SCREW M3x8 2 PCS
D910 93G 60237 SRF20100C 1 PCS
D911 93G 60237 SRF20100C 1 PCS
96G 29 1 SHRINK TUBE UL/CSA 12 MM
15G6206 1 HINGE BRACKET 1 PCS
34G6202 GM 4B REAR COVER 1 PCS
Q1G 140 8128 SCREW 6 PCS
33G6288 Q1 L KEY PAD 1 PCS
33G6289 1 LENS 1 PCS
34G6201AGM 2B BEZEL 1 PCS
12G 394 3 RUBBER FOOT 4 PCS
34G1435 GM B STAND 1 PCS
34G6203 GM B BASE 1 PCS
37G 510 1 HINGE_ASS'Y 1 PCS
Q1G1040 10128 TAP 4X8 FOR SP 3 PCS
http:/
/www.w
jel.ne
t
