Accessories for SV2000 – tie rod and cassette type Overview_H4_Deel... · =D ElIVEry EX-STOCK F Or MO r I nFO, ASK Th SMC EXPE TS: Ph +31(0)205318888 / @SMCP uMATICS.nl Accessories

4

103■

VVQ1000-51A-

An200-KM10An300-KM10

SV2000-67-1A

SV2000-38-1FA

SV2000-39-1FA

SV2000-00-P PSV2000-00-A1 ASV2000-00-B1 B

KQ2P-

VVQ1000-58A

SV1000-74-1A

VVZS3000-21A-2*VVZS3000-21A-3*VVZS3000-21A-4*

AXT100-MC26AXT100-MC26-015AXT100-MC26-030AXT100-MC26-050AXT100-MC26-080

SV2000-59-1A

SV2000-59-2A

SV2000-50-1A-

SV2000-50-2A-

SV2000-59-3A

SV2000-59-3A

SV2000-50-3A-

SV2000-50-4A-

Sub

ject

to

cha

nge

SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES

= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]

Accessories for SV2000 – tie rod and cassette type

replacement fittingPart number = C4 for Ø4 mm; C6 for Ø6 mm; C8 for Ø8 mm.

Silencer – for exhaust

Part number

Blanking platePart number

Individual P-supplyPart number

Individual r-exhaustPart number

Sandwich regulator – with pressure gauge

Part number regulated port

Blanking plug – in place of unused connections

Part number = 04 for Ø4 mm; 06 for Ø6 mm; 08 for Ø8 mm.

Blanking plug – in place of fitting

Part number

Blocking indicatorPart number

D-sub connector – 25-pin, in accordance with MIL-norm (0.3 mm2)

Part number TypeConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable

Circular connector – 26-pin (IP67), with cable

Part number TypeConnector onlyConnector with 1.5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable

Blocking disc – supply

Part number

Blocking disc – exhaust

Part number

Expansion part – single solenoid

Part number = C4 for Ø4 mm; C6 for Ø6 mm; C8 for Ø8 mm.

Expansion part – double solenoid


Blanking plate Expansion part

For manifold type 10S

For manifold type 16S


Part number


Part number





4

104 ■

5 µm0.7 MPa (7 bar)

920 ln/min

SV3100-5Fu 99 g

SV3100R-5Fu 99 g

SV3200-5Fu 102 g

SV3200R-5Fu 102 g

SV3300-5Fu 110 g

SV3300R-5Fu 110 g

SV3400-5Fu 110 g

SV3400R-5Fu 110 g

SV3500-5Fu 110 g

SV3500R-5Fu 110 g

SV3000-60-5A-1A

SV3000-60-5B-1A

SS5V3-W10S10D-02D-C10 2SS5V3-W10S10D-04D-C10 4SS5V3-W10S10D-06D-C10 6SS5V3-W10S10D-08D-C10 8SS5V3-W10S10D-10D-C10 10SS5V3-W10S10D-12B-C10 12SS5V3-W10S10D-14B-C10 14SS5V3-W10S10D-16B-C10 16SS5V3-W10S10D-18B-C10 18SS5V3-W10S10D-20B-C10 20

VVQC1000-F25-1VVQC1000-P26-1

VVQC1000-M26-1

Sub

ject

to

cha

nge



SV3000 – solenoid valve, plug-inMedium Air, lubricated or not lubricated (dry)

Degree of filtrationMax. working pressure

Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)

Operating temperature up to 50 °C (dry air)

Voltage/power Standard: 24 VDC (12 VDC on request)/0.65 W

Flow

Enclosure IP67 (factory-assembled in japan; other-wise IP65; D-sub and flat cable: IP54)

Manual override Standard: non-lockableLeD, surge voltage suppressor Standard, valve has no polarity

■ Easy to change configuration ■ Lifetime of at least 50 000 000 cycles■ Secure transmission of signals via connectors between the manifold blocks

Valve – plug-in

Part number1 Type Weight5/2 mono stable, rubber seal5/2 mono stable, rubber seal, external pilot5/2 bi stable, rubber seal5/2 bi stable, rubber seal, external pilot5/3 closed center, rubber seal5/3 closed center, rubber seal, external pilot5/3 exhausted center, rubber seal5/3 exhausted center, rubber seal, external pilot 5/3 pressurized center, rubber seal5/3 pressurized center, rubber seal, external pilot

1. Add D for lockable manual override. Example: SV3100-5FuD.

Output modules – for electrical accessories, see EX250/-500 fieldbus

Part number Type1

One normally open relay output, 110 VAC/3 A, 30 VDC/3 ATwo normally open relay outputs, 110 VAC/0.3 A, 30 VDC/1 A

1. Load capacity for resistive loads.

Sub plates – basic type1, add electrical connection below

Part number number of stations

1. For other versions, contact SMC.

Electrical connections – interface modules

Part number TypeD-sub, 25-pinFlat cable, 26-pinCircular connector, 26-pin (IP67)

Fieldbus – EX250, EX260, EX500 and EX600, see chapter 5

use interface for VQC series for sub plates above.

4

105■

VVQ2000-51A-

An300-KM12

SV3000-67-1A

KQ2P-

VVQ2000-58A

SV1000-74-1A

SV3000-59-1A

SV3000-59-1A

SV3000-38-1FA

SV3000-39-1FA

SV3000-00-P PSV3000-00-A1 ASV3000-00-B1 B

SV3000-50-1A-

SV3000-50-2A-

SV3000-69A

SV3000-65-1

SX7000-57-5

SV3000-21-1

SX3000-146-2

Sub

ject

to

cha

nge



replacement fittingPart number = C6 for Ø6 mm; C8 for Ø8 mm; C10 for Ø10 mm.


Part number





Part number



Part number


Part number









DIn rail mountPart number

Accessories & spare parts for SV3000 – solenoid valve, plug-in

Gasket – between stations (12), manifold type 10

Part number

Gasket – between valve and manifold (10), manifold type 10

Part number

Valve mounting screw – (15)

Part number

Seal – between solenoid and manifold (11)

Part number

Note! IP67 is only guaranteed for complete manifolds assembled at SMC in japan. Local assembly means IP65.


4

106 ■


1600 ln/min

SV4100-5Fu 186 g

SV4100R-5Fu 186 g

SV4200-5Fu 190 g

SV4200R-5Fu 190 g

SV4300-5Fu 211 g

SV4300R-5Fu 211 g

SV4400-5Fu 211 g

SV4400R-5Fu 211 g

SV4500-5Fu 211 g

SV4500R-5Fu 211 g

SS5V4-W10CD-02D-C12 SS5V4-W10S0D-02D-C12

SS5V4-10FD1-02D-C12SS5V4-10PD1-02D-C12

SS5V4--02D-C12 2SS5V4--04D-C12 4SS5V4--06D-C12 6SS5V4--08D-C12 8SS5V4--10D-C12 10SS5V4--12B-C12 12SS5V4--14B-C12 14SS5V4--16B-C12 16SS5V4--18B-C12 18SS5V4--20B-C12 20

Sub

ject

to

cha

nge



SV4000 – solenoid valve, plug-inMedium Air, lubricated or not lubricated (dry)


Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); /2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)



Flow

Enclosure IP67 (factory-assembled in japan; other-wise IP65; D-sub and flat cable: IP54)


■ Easy to change configuration ■ Lifetime of at least 50 000 000 cycles■ Secure transmission of signals via connectors between the manifold blocks

Valve – plug-in

Part number1 Type Weight5/2 mono stable, rubber seal5/2 mono stable, rubber seal, external pilot5/2 bi stable, rubber seal5/2 bi stable, rubber seal, external pilot5/3 closed center, rubber seal5/3 closed center, rubber seal, external pilot5/3 exhausted center, rubber seal5/3 exhausted center, rubber seal, external pilot 5/3 pressurized center, rubber seal5/3 pressurized center, rubber seal, external pilot

1. Add D for lockable manual override. Example: SV4100-5FuD.

Sub plates – tie rod type (10)

Sub plate Example of part numberMultipole connection, IP67For EX500 Gateway (Gateway parts ordered separately), IP67D-sub connection, IP40Flat cable connection, IP40


For other versions, contact SMC. For fieldbus compo-nents, see chapter 5.

4

107■

VVQ4000-50B-

SY9000-58A-

An300-KM12

SV4000-67-1A

KQ2P-

SY9000-62-1A

SV1000-74-1A

SY9000-57-1A

SY9000-57-1A

SV4000-38-1FA

SV4000-39-1FA

SV4000-00-P PSV4000-00-A1 ASV4000-00-B1 B

SV4000-50-1A-

SV4000-50-2A-

SV3000-69A

SV4000-65-1

SY9000-11-2

SV2000-21-2

SX3000-146-2

Sub

ject

to

cha

nge



replacement fitting – push-in

Part number = C8 for Ø8 mm; C10 for Ø10 mm; C12 for Ø12 mm; 02F for G1/4; 03F for G3/8.

replacement fitting – female thread (G)

Part number = 02F for G1/4; 03F for G3/8.


Part number





Part number



Part number


Part number









DIn rail mountPart number

Accessories & spare parts for SV4000 – solenoid valve, plug-in

Gasket – between stations (12), manifold type 10

Part number

Gasket – between valve and manifold (10), manifold type 10

Part number

Valve mounting screw – (15)

Part number

Seal – between solenoid and manifold (11)

Part number

Note! IP67 is only guaranteed for complete manifolds assembled at SMC in japan. Local assembly means IP65.


4

108 ■


SV1000: ≈ 210 ln/min; SV2000: ≈ 580 ln/min; SV3000: ≈ 870 ln/min

SV1120-5W1u-C6-X25 6 mm M5 × 0.8 210 ln/min 88 gSV1220-5W1u-C6-X25 6 mm M5 × 0.8 210 ln/min 93 gSV1320-5W1u-C6-X25 6 mm M5 × 0.8 190 ln/min 95 gSV1420-5W1u-C6-X25 6 mm M5 × 0.8 210 ln/min 95 gSV1520-5W1u-C6-X25 6 mm M5 × 0.8 200 ln/min 95 g

SV2120-5W1u-C8F-X25 8 mm G1/8 590 ln/min 96 gSV2220-5W1u-C8F-X25 8 mm G1/8 590 ln/min 100 gSV2320-5W1u-C8F-X25 8 mm G1/8 440 ln/min 105 gSV2420-5W1u-C8F-X25 8 mm G1/8 670 ln/min 105 gSV2520-5W1u-C8F-X25 8 mm G1/8 470 ln/min 105 g

SV3120-5W1u-C10F-X25 10 mm G1/4/G1/8 870 ln/min 121 gSV3220-5W1u-C10F-X25 10 mm G1/4/G1/8 870 ln/min 124 gSV3320-5W1u-C10F-X25 10 mm G1/4/G1/8 670 ln/min 132 gSV3420-5W1u-C10F-X25 10 mm G1/4/G1/8 590 ln/min 132 gSV3520-5W1u-C10F-X25 10 mm G1/4/G1/8 870 ln/min 132 g

SX3000-16-1A SV1000SX5000-16-1A SV2000SX7000-16-1A SV3000

SX3000-16-2A SV1000SX5000-16-2A SV2000SX7000-16-2A SV3000

Sub

ject

to

cha

nge



SV1000, -2000 & -3000 – solenoid valve with ports in valve body

Medium Air, lubricated or not lubricated (dry)Degree of filtration

Max. working pressure

Min. working pressure

5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar)



Flow

Enclosure IP67 (embedded 300 mm cable with M12 con-nector)


■ For single valves in harsh environments

Valve SV1000 – M12 connector with 300 mm cable, IP67 (for other cable lengths, contact SMC)

Part number Type Connection A/BConnection

P/EA, EB Flow Weight5/2 mono stable, rubber seal5/2 bi stable, rubber seal5/3 closed center, rubber seal5/3 exhausted center, rubber seal5/3 pressurized center, rubber seal







Bracket – for individual valve (side bracket)

Part number Fits

Bracket – for individual valve (foot bracket)

Part number Fits

4

109■

VFn2n VFn3000n

10 µm0.9 MPa (9 bar) 1 MPa (10 bar)0.15 MPa (1.5 bar) 0.1 MPa (1 bar)

1370 ln/min 1670 ln/minIP65

24 VDC

VFn212n-5YO-02F-Q 240 gVFn212n-5YO-02F-D-Q 380 gVFn2120n-5YO-02F-Q 260 gVFn2220n-5YO-02F-Q 400 g

220 VAC

VFn212n-4YO-02F-Q 240 gVFn2120n-4YO-02F-Q 260 gVFn2220n-4YO-02F-Q 400 g

24 VDC

VFn3120n-5YO-02F-A-Q 320 gVFn3220n-5YO-02F-A-Q 450 g

220 VAC

VFn3120n-4YO-02F-A-Q 320 gVFn3220n-4YO-02F-A-Q 450 g

X31X32X30

Sub

ject

to

cha

nge



■ Electrical connection M12, IP67■ Corrosion resistant PPS body■ Acid-proof air connections■ Protected exhaust ports■ Contact SMC for more information

VFn nAMur – solenoid valveType Seal Rubber seal Metal seal

Medium Air, lubricated or not lubricatedDegree of filtration

Max. working pressureMin. working pressure

Operating temperature –10 to 60 °C (dry air)Voltage/power 24 VDC or 220 VAC/1.8 W

Flow Qn

EnclosureManual override non-lockable

LeD, surge voltage suppressor See connector

■ Connection according to nAMuR (other ports G1/4) ■ High flow – for quick conversion

Valve – rubber seal

Part number Type Weight3/2 mono stable3/2 bi stable5/2 mono stable5/2 bi stable

Part number Type Weight3/2 mono stable5/2 mono stable5/2 bi stable

Valve – metal seal

Part number Type Weight5/2 mono stable5/2 bi stable

Part number Type Weight5/2 mono stable5/2 bi stable

Connector – DIn43650B

Part number TypeStandardLED + surge voltage suppressor, 24 VDCLED + surge voltage suppressor, 220 VAC

Also available as DIn43650C. Contact SMC.

4

110 ■

5 µm

1 MPa (10 bar)

1.8 W

24 VDC

VFS2100-5FZ-Q 800 ln/min 340 gVFS2200-5FZ-Q 800 ln/min 420 gVFS2300-5FZ-Q 650 ln/min 430 gVFS2400-5FZ-Q 650 ln/min 430 gVFS2500-5FZ-Q 650 ln/min 430 g

220 VAC

VFS2100-4FZ-Q 800 ln/min 340 gVFS2200-4FZ-Q 800 ln/min 420 gVFS2300-4FZ-Q 650 ln/min 430 gVFS2400-4FZ-Q 650 ln/min 430 gVFS2500-4FZ-Q 650 ln/min 430 g

VV5FS2-01TR1-021-02F-X108 2VV5FS2-01TR1-031-02F-X108 3VV5FS2-01TR1-041-02F-X108 4VV5FS2-01TR1-051-02F-X108 5VV5FS2-01TR1-061-02F-X108 6VV5FS2-01TR1-071-02F-X108 7VV5FS2-01TR1-081-02F-X108 8VV5FS2-01TR1-091-02F-X108 9VV5FS2-01TR1-101-02F-X108 10VV5FS2-01TR1-111-02F-X108 11VV5FS2-01TR1-121-02F-X108 12VV5FS2-01TR1-131-02F-X108 13VV5FS2-01TR1-141-02F-X108 14VV5FS2-01TR1-151-02F-X108 15VV5FS2-01TR1-161-02F-X108 16

EVVFS2000-1A-10-2F-X108

VVFS2000-10A

VFS2000-LP-02F

VVFS2000-37A-1

VVFS2000-20A-1

ARBF2000-00-P-1

VVFS2000-22A-1

VVFS2000-21A-1

VFS2100-4FZ A 25.8 mmVVFS2000-R-01-1 B 23.6 mmVVFS2000-21A B 23.6 mmVVFS2000-24A-1R B 23.6 mmVVFS2000-37A B 23.6 mmVVFS2000-20A-1 B 23.6 mm

VVFS2000-22A-1 C 37.3 mm

ARBF2000-P B 23.6 mmVVFS2000-10A D 10.2 mm

AXT624-26 31 mm AAXT625-23 55 mm A + BAXT625-61 78 mm A + B + BVVF2000-22-19 92 mm A + B + CAXT625-62 101 mm A + B + B + BVVF2000-22-20 115 mm A + B + B + C

Sub

ject

to

cha

nge



VFS2000 – solenoid valve, plug-inMedium Air or neutral gases

Degree of filtrationSmörjning not required


Min. working pressure 5/2 (all): 0.1 MPa (1 bar);5/3 with center position: 0.15 MPa (1.5 bar)

Operating temperature –10 to 60 °CManual override non-lockable (lockable on request)

Enclosure IP50 (dust-proof)Available voltages 24 VDC/220 VAC (other voltages on request)Voltage tolerance –15 to +10%

Power consumptionElectrical connection Built-in terminal in manifold

All pilot valves have LED indication and surge voltage suppressors.

■ Compact – more valves fit in control cabinet

Valves – plug-in

Part number Type Flow Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center

Part number Type Flow Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center

ManifoldsPart number Stations

Expansion modules – valve manifold

Part number TypeStandard


Single sub platePart number

P-shut-off plate – for supply air

Part number

Speed controlPart number

Pressure regulator – P-regulation

Part number

Check valve unit – combine with VFS2400

Part number

Pilot operated check valvePart number

Dimensions – for choice of screws

Component Part number Size height1

ValveSeparate R-exhaustIndividual P-shut-offPressure relief plateSupply shut-offThrottle valve blockPressure-controlled check valveP-port pressure regulatorBlanking plate

1. Including gasket.

ScrewsPart number length Fits size

4

111■

5 µm1 MPa (10 bar)

IP65

VS -8- FGr - S - 3 V Z

rS

FGFhGFJGFIG

SD

3 24 VDC4 12 VDC Z

4

VVS8040-11A

VV801-P-03F

VV801-R-03F

VVS8040-ARB-P-1-X1S PVVS8040-ARB-P-1-X1L PVVS8040-ARB-A-1-X1S AVVS8040-ARB-A-1-X1L AVVS8040-ARB-B-1-X1S BVVS8040-ARB-B-1-X1L B

Sub

ject

to

cha

nge



VSr8-4 & VSS8-4 – solenoid valve, plug-in, ISO 15407-2




5/2 mono stable – metal seal: 0.1 MPa (1 bar); rubber seal: 0.15 MPa (1.5 bar);

5/2 bi stable – metal seal: 0.1 MPa (1 bar); rubber seal: 0.1 MPa (1 bar);

5/3 with center position – metal seal : 0.15 MPa (1.5 bar); rubber seal: 0.2 MPa (2 bar)

Operating temperature Metal seal: –10 to 60 °C (dry air); rubber seal –5 to 60 °C (dry air)

Voltage/power Standard: 24 VDC ±10% (12 VDC on request)/1 W

Flow Rubber seal: 1000 ln/minEnclosure

Manual override Standard: non-lockable (lockable on request)LeD, surge voltage suppressor Standard

■ High flow ■ Low weight ■ ISO 15407-2

Part number: valve

Seal type

Rubber sealMetal seal

Function

5/2 position5/3 closed center5/3 exhausted center5/3 pressurized center

no. of solenoids

Single solenoidDouble solenoid

rated voltage

Individual pilot exhaust

Options

noneWith LED and surge voltage suppressor

Size 01

Blanking plate – with gasket and screws

Part number

Individual P-supply – between valve and plate

Part number

Individual r-exhaust – between valve and plate

Part number

Pressure regulator – between valve and plate

Part number regulated portPressure gauge

adapterShortLongShortLongShortLong

4

112 ■

➋0203

02B

➊2 16

➒

K

S

➏

01 8

➐

123

➑

n nPn

➎EX250 EX500 EX126

Dev

icen

et

Pr

OFI

Bu

S-

DP

CC

-lIn

K

AS

-i

CA

no

pen

Dev

icen

et

Pr

OFI

Bu

S-

DP

CC

-lIn

K

rem

ote

I/O

CC

-lIn

K

+COM — — ✔ — — ✔ ✔ ✔ ✔ ✔n –COM ✔ ✔ — ✔ ✔ ✔ ✔ ✔ ✔ —

➑ ➒

VV8 -01 n -W1-03 SDQ n 1 1➊ ➋ ➌ ➍ ➎ ➏ ➐

5

➌Rc

T nPTFF G1

➍

FD0FD1FD2FD3PD0PD1PD2PD3

PDC

TD0

lD0lD1lD2MD0MD1MD2MD3

SD0SDA1

SDA2

SD0SDQSDnSDVSDy

SDTA

SDTB

SDTC

SDTD

SDVB

Sub

ject

to

cha

nge



VSr8-4 & VSS8-4 – solenoid valve, plug-in, ISO 15407-2

Port position and size

Side 1/4Side 3/8Bottom and side 1/4 with plug in side

number of valve stations

2 stations 16 stations

Options

noneSpecial wiring (not double wiring)1

Direct exhaust with built-in silencer

If more than one option is chosen, enter them alphabetically. Example: “KS”. 1. Ensure that wiring is entered in manifold specification sheet.

Input block (only entered when

input blocks are used)

Without fieldbus node/input blockWithout input blockWith 1 input block With 8 input blocks

Type of input block (only

entered when input blocks are used)

Without input blockM12, 2 inputsM12, 4 inputsM8, 4 inputs

Polarity, input block (only entered when input blocks

are used)

PnP or without fieldbus node/input blocknPn

Fieldbus polarity

Polarity

Part number: valve manifold

Size 01

Port connection code

1. According to ISO 1179-1. G thread.

Electrical connection/cable lengthInput

D-side Connection/cable lengthValve

stations2

F co

nn. D-sub connector (25P) without cable

1 to 12 (16)

D-sub connector (25P) w. 1.5 m cableD-sub connector (25P) w. 3 m cableD-sub connector (25P) w. 5 m cable

P c

onn

.

Flat cable (26P) without cable1 to 12

(16)Flat cable (26P) with 1.5 m cableFlat cable (26P) with 3 m cableFlat cable (26P) with 5 m cable

Flat cable (20P) without cable1 1 to 9 (16)

T c

onn

.

Terminal connection in box 1 to 10 (16)

l co

nn. Cable (25 wire), 0.6 m wire length

1 to 12 (16)Cable (25 wire), 1.5 m wire length

Cable (25 wire), 3 m wire length

M c

onn

. Multipole connector (26P) without cable1 to 12

(16)Multipole connector (26P) with 1.5 m cableMultipole connector (26P) with 3 m cableMultipole connector (26P) with 5 m cable

S c

onn

ecti

on

Distributed fieldbus (EX500)For fieldbus without fieldbus node

1 to 8 (16)

With fieldbus node for Remote I/OWith fieldbus node for Devicenet/ PROFIBuS-DP/CC-LInK

Fieldbus with in- and outputs (EX250)For fieldbus without fieldbus node

1 to 12 (16)

Fieldbus for DevicenetFieldbus for PROFIBuS-DPFieldbus for CC-LInKFieldbus for CAnopenAS-i, 8 in/8 out, 31-slave model, 2 power supplies

1 to 4 (8)

AS-i, 4 in/4 out, 31-slave model, 2 power supplies

1 to 2 (4)

AS-i, 8 in/8 out, 31-slave model, 1 power supply

1 to 4 (8)

AS-i, 4 in/4 out, 31-slave model, 1 power supply

1 to 2 (4)

Fieldbus with outputs (EX126)

Fieldbus for CC-LInK 1 to 8 (16)

1. P connection: Order cables separately for type 20P.2. numbers in paranthesis indicates maximum number of solenoids for configuration with mixed single-double solenoid connections. Maximum number of valve stations is determined by total number of solenoids. For mixed connections, use option symbol “K”.

4

113■

10 µm0.99 MPa (9.9 bar)0.1 MPa (1 bar)

1470 ln/min; EVS7-6-FGH-D: 1390 ln/min

EVS7-6-FG-S-3CVO-Q 460 gEVS7-6-FG-D-3CVO-Q 560 gEVS7-6-FHG-D-3CVO-Q 560 gEVS7-6-FjG-D-3CVO-Q 560 gEVs7-6-FIG-D-3CVO-Q 560 g

EVS7-6-FG-S-3ZM0-Q 460 gEVS7-6-FG-D-3ZM0-Q 560 gEVS7-6-FHG-D-3ZM0-Q 560 gEVS7-6-FjG-D-3ZM0-Q 560 gEVS7-6-FIG-D-3ZM0-Q 560 g

EVS7-6-FG-S-9CVO-Q(AC220V) 460 gEVS7-6-FG-D-9CVO-Q(AC220V) 560 gEVS7-6-FHG-D-9CVO-Q(AC220V) 560 gEVS7-6-FjG-D-9CVO-Q(AC220V) 560 gEVS7-6-FIG-D-9CVO-Q(AC220V) 560 g

VQ7-6-FG-S-3nSC-X23 460 gVQ7-6-FG-D-3nSC-X23 560 gVQ7-6-FHG-D-3nRSC-X23 560 g

VQ7-6-FHG-D-3nRSC-X23 560 g

VQ7-6-FjG-D-3nSC-X23 560 gVQ7-6-FIG-D-3nSC-X23 560 g

EVS7-1-A02F G1/4EVS7-1-A03F G3/8

EAXT502-1A-A02-L G1/4EAXT502-1A-A03-L G3/8

EAXT502-LA-03 G3/8

EAXT502-RA-03 G3/8

AXT502-9A

Sub

ject

to

cha

nge



EVS7-6 & VQ7-6 – solenoid valve, ISO1Medium Air, lubricated or not lubricated

Degree of filtrationMax. working pressureMin. working pressure

Operating temperature up to 60 °CVoltage/power 24 VDC/220 VAC, –15 to +10%/2 W

FlowManual override Standard: non-lockable

LeD, surge voltage suppressor CnOMO: in connector; M12: i valve

■ ISO 5599/1 + CnOMO ■ Metal seal construction – lifetime of at least 100 000 000 cycles

Valves – 24 VDC, CnOMO

Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center

Valves – 24 VDC, M12 connection


Valves – 220 VAC, CnOMO


Valves – 24 VDC, M12 connection, 500 mm cable

Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 closed center, rubber seal5/3 exhausted center5/3 pressurized center

Single sub platesPart number Connection

Sub plates – for manifold

Part number Connection

End cover – left


End cover – right



Part number

4

114 ■

A0A6A7

A920002

6M-0391

EX500-AP010-SEX500-AP050-SEX500-AP010-AEX500-AP050-A

AXT502-14

EVV71-P-02F-L

EVV71-R-03F-L

AXT503-23A

VV71-FPG

ARB250-00-P PARB250-00-A AARB250-00-B B

EAXT518A-3 24 VDCEAXT518A-6 220 VAC

AXT500-13AXT503-33-1

Sub

ject

to

cha

nge



EVS7-6 & VQ7-6 – solenoid valve, ISO1

Connectors – DIn43650 type A

Part number DescriptionStandard (black)24 VDC, LED, surge voltage suppressor230 VAC, LED, surge voltage suppressor

Adapter – DIn43650, for conversion from A to B connector

Part number

Adapter – 2 × DIn43650B to M12 (A coded); used when replacing existing valve with DIn connector, with valve with M12 connector, without changing existing wiring. Suitable e.g. for switching to SMC’s VQ7 ISO valve.

Part number Description2 × DIn43650B (male) to M12, A code (5-pin female); with 0.3 m cable

Connectors – with cable (M12)

Part number Description5-pin straight female, 1 m cable5-pin straight female, 5 m cable5-pin angled female, 1 m cable5-pin angled female, 5 m cable

Blocking disc P, r – channel in plate

Part number

Separate supply P – between valve and plate

Part number

Separate exhaust r – between valve and plate

Part number

Exhaust throttle – for speed control

Part number

Check valve – for closed center (with FjG)

Part number

Pressure regulators – between valve and plate


Pilot parts CnOMO – spare part

Part number Voltage

Spare partsPart number Description

GasketAllen screw M5 × 35 with lock washer

Adapter 6M-0391

4

115■

10 µm0.99 MPa (9.9 bar)0.1 MPa (1 bar)

3160 ln/min

EVS7-8-FG-S-3CVO-Q 655 gEVS7-8-FG-D-3CVO-Q 740 gEVS7-8-FHG-D-3CVO-Q 890 gEVS7-8-FjG-D-3CVO-Q 890 gEVS7-8-FIG-D-3CVO-Q 890 g


EVS7-8-FG-S-9CVO-Q(AC220V) 655 gEVS7-8-FG-D-9CVO-Q(AC220V) 740 gEVS7-8-FHG-D-9CVO-Q(AC220V) 890 gEVS7-8-FjG-D-9CVO-Q(AC220V) 890 gEVS7-8-FIG-D-9CVO-Q(AC220V) 890 g

VQ7-8-FG-S-3nSC-X23 655 gVQ7-8-FG-D-3nSC-X23 740 gVQ7-8-FHG-D-3nSC-X23 890 g

VQ7-8-FHG-D-3nRSC-X23 890 g

VQ7-8-FjG-D-3nSC-X23 890 gVQ7-8-FIG-D-3nSC-X23 890 g

EVS7-2-A03F G3/8EVS7-2-A04F G1/2

EAXT512-1A-A03-L G3/8EAXT512-1A-A04-L G1/2

EAXT512-LA-04 G1/2

EAXT512-RA-04 G1/2

AXT512-9A

Sub

ject

to

cha

nge



EVS7-8 & VQ7-8 – solenoid valve, ISO2Medium Air, lubricated or not lubricated












Valves – 24 VDC, M12 connection, 500 mm cable

Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 closed center, rubber seal5/3 exhausted center5/3 pressurized center


Sub plates – for manifold


End cover – left


End cover – right



Part number

4

116 ■

A0A6A7

A920002

6M-0391


AXT512-14-1A

AXT512-14-2A

EVV72-P-03F-L-Q

EVV72-R-04F-L-Q

AXT510-32A

VV72-FPG

ARB350-00-P PARB350-00-A AARB350-00-B B


AXT510-13AXT510-39-1

Sub

ject

to

cha

nge






Part number





EVS7-8 & VQ7-8 – solenoid valve, ISO2

Blocking disc P – channel in plate

Part number

Blocking disc r – channel in plate

Part number

Separate supply P – between valve and plate

Part number

Separate exhaust r – between valve and plate

Part number


Part number

Check valves – for closed center (with FjG)

Part number

Pressure regulators – between valve and plate



Part number Voltage



Adapter 6M-0391

4

117■

10 µm0.99 MPa (9.9 bar)0.1 MPa (1 bar)

4905 ln/min

EVS7-10-FG-S-3CVO-Q 850 gEVS7-10-FG-D-3CVO-Q 1050 gEVS7-10-FHG-D-3CVO-Q 1250 gEVS7-10-FjG-D-3CVO-Q 1250 gEVS7-10-FIG-D-3CVO-Q 1250 g


EVS7-10-FG-S-9CVO-Q(AC220V) 850 gEVS7-10-FG-D-9CVO-Q(AC220V) 1050 gEVS7-10-FHG-D-9CVO-Q(AC220V) 1250 gEVS7-10-FjG-D-9CVO-Q(AC220V) 1250 gEVS7-10-FjG-D-9CVO-Q(AC220V) 1250 g

EVS7-3-A06F G3/4EVS7-3-A10F G1

A0A6A7

A920002

6M-0391



AXT520-10EAXT520-11-2

Sub

ject

to

cha

nge



EVS7-10 – solenoid valve, ISO3Medium Air, lubricated or not lubricated
















Part number






Part number Voltage



Adapter 6M-0391

4

118 ■

10 µm0.99 MPa (9.9 bar)0.1 MPa (1 bar)

ISO1: 1470 ln/min; ISO2: 3160 ln/min; ISO3: 4905 ln/min

EVS7-6-FG-S-3DOB-XSE647 EVS7-6-FG-S-3YOB-XSE647 460 gEVS7-6-FG-D-3DOB-XSE647 EVS7-6-FG-D-3YOB-XSE647 560 g






AXT503-23A ISO1AXT510-32A ISO2

SF4-5DOB-12 24 VDCSF4-4DOB-12 230 VAC

V31V32V30

X31X32X30

5599/1

Sub

ject

to

cha

nge



EVS7-XSE647 – solenoid valve, ISOMedium Air, lubricated or not lubricated



Flow

Manual override Standard: lockableLeD, surge voltage suppressor See connectors below

■ DIn43650 type B connector for quick and easy replacement■ Metal seal construction – unsurpassed lifetime of at least 100 000 000 cycles ■ Pilot valve secured with double screws for maintenance-free function

Valves ISO1 – 24 VDC, DIn43650B, lockable manual override

Part number, straight pins Part number, bent pins Type Weight5/2 mono stable5/2 bi stable





Valves ISO1 – 230 VAC, DIn43650B, lockable manual override






For non-lockable manual override or other features, contact SMC.


Part number Size

Pilot parts – spare part, straight pins

Part number Voltage

Connectors – DIn43650 type B, straight pins


Connectors – DIn43650 type B, bent pins


4

119■

5 µm

IP40

A0.35 W

0.1 MPa 21 ln/minB 0.3 MPa 11 ln/minC

0.5 W0.3 MPa 21 ln/min

D 0.5 MPa 11 ln/minE 0.1 MPa 11 ln/minF 0.3 MPa 6 ln/min

S070 -A -G

A

B

C

M

M3M532 40

5 24 VDC6 12 VDCV 6 VDCS 5 VDCr 3 VDC

G

C

5 B

23 20

A01 Ø3.18/Ø2A02 Ø4/Ø2.5

B01 —

M01 Ø3.18/Ø2

SS07 -3 08A02 C

Sub

ject

to

cha

nge



S070 – 3/2 miniature solenoid valveMedium Air and inert gases

Degree of filtrationMax. working pressure See table belowMin. working pressure Vacuum (1.33 × 102 Pa)

Operating temperature –10 to 50 °CVoltage/power 3–24 VDC ±10%/0.1–0.5 W; see table below

Flow See table belowEnclosure

Manual override not standardLeD, surge voltage suppressor not standard

■ Very compact: valve width 7 mm ■ Particularly suitable for medichal technics ■ Low power requirement

Part number: valve

Power, pressure and flow

Power consumption

Max. working pressure Flow

Possible voltage

All

0.1 W, with power saving circuit

24 VDC only

Body type

Plate assembly, clip mountingPlate assembly, screw mountingBody ported, for individual assemblyBody ported, cassette type

Port size

Without sub plate Body type B

With sub plate Body type B

nipple, Ø3.18/Ø2 Body type C+Mnipple, Ø4/Ø2 Body type M

rated voltage Electrical connection

Single wireSingle wire with LED and surge voltage suppressor

Part number: sub plate

No.of valve stations

2 stations3 stations 20 stations

Port size

SuP/EXh-port (tubing size) OuT-port

OuT-port (tubing size) Manifold type

nipple, Ø6/Ø4 nipple Plate assembly,

expandable (cassette)

M5, female thread M3, female thread

Plate assembly, aluminum plate

nipple, Ø6/Ø4 nipple Body ported, expandable (cassette)

3-port valve Single wire

A selection of the range above is in stock. Contact SMC for more information.

4

120 ■

5 µm0.7 MPa (7 bar)0 MPa (0 bar)

V11: 7.8 ln/min; V11A: 16 ln/minIP50

V114-5G 13 gV114-5LOu 13 gV114-5LOZ 13 gV114-5MOu 13 gV114A-5LOu 13 g

V111-5LOu 13 gV111-5WOu M8, IP67 17 g

V100-74-1 M5 1

VV100-S41-02-M5 M5 2VV100-S41-04-M5 M5 4VV100-S41-06-M5 M5 6VV100-S41-08-M5 M5 8VV100-S41-10-M5 M5 10

V100-77-1A

M-5P

SY100-30-4A-6 600 mmSY100-30-4A-30 3000 mm

SY100-68-A-6 600 mmSY100-68-A-30 3000 mm

WX-83S-6 600 mmWX-83S-20 2000 mm

Sub

ject

to

cha

nge



V114 & V111 – solenoid valveMedium Air, lubricated or not lubricated


Operating temperature up to 50 °C

Voltage/power 24 VDC (other voltages on request)/ V11: 0.4 W; V11A: 1.1 W

Flow Enclosure

Manual override Standard: non-lockableLeD, surge voltage suppressor Standard

■ Can be used for vacuum down to –100 kPa (10 torr) ■ Lifetime of at least 100 000 000 cycles

Valve – 3/2 normally closed with manual override, 24 VDC

Part number note WeightSingle wire 300 mmL connection, without polarityL connectionM connection, without polarityL connection, without polarity

Valve – 3/2 normally closed without manual override, 24 VDC

Part number note WeightL connection, without polarity

Valve without manual override is preferably used as replacement pilot valve for series SY and SYj.

Single sub platePart number Connection Stations

Sub platePart number Connection Stations


Part number

Blanking plug – for A-, P- and R-port

Part number

Connector – standard with cable

Part number Cable length

Connector – covered with cable


Connector – for M8 connection (IP67)


Sub plate

Blanking plate

4

121■

10 µm

IP40

12

SD

5 24 VDC6 12 VDC

C

M

Mn

MO

C2C4

l2l4

B2B4

- C4uV1 - 5 C00

D11 - C4MnV1 - 5D

Sub

ject

to

cha

nge



VV100 – 3/2 block mounted solenoid valve, cassette type

Medium Air, lubricated or not lubricatedDegree of filtrationMax. working pressure Standard: 0.7 MPa (7 bar), contact SMC for more information

Min. differential pressure Down to –100 kPaOperating temperature –10 to 50 °C, no freezing

Voltage/power 24 VDC/0.4 W; for other voltages, see part numberFlow 1 (P) to 2A/2B: 8 ln/min; 2A/2B to 3(E): 14 ln/min

EnclosureManual override not available

Part number: valves – plug-in card edge-type

Contact SMC for more information.

Standard

Individual electrical connection (plug-in, mixed assembly)

Valve type

normally closed (nC)normally open (nO)

normally open and normally closed valves can not be mounted on the same manifold.

no. of solenoids

1 (single solenoid)2 (double solenoid)

rated voltage

Electrical connectionIntended for centralized electri-cal connection

Individual electrical connection, with 300 mm wire

Individual electrical connection, without wire (with connector)

Individual electrical connection, without connector

Port size 2a/2b connectionStraight fitting

Ø2 mm, push-in

Ø4 mm, push-in

Elbow fitting (facing up)

Ø2 mm, push-in

Ø4 mm, push-in

Elbow fitting (facing down)

Ø2 mm, push-in

Ø4 mm, push-in

With lED and surge voltage suppressor (non-polar)

With PCB connector

With PCB connector

With PCB connector

4

122 ■

- 05 C62 -1u

AB

1

2

1

2

C4 C6 l4 l6 B4 B6

F1

F2

VV100 10F- A D

01 12

01 12

Sub

ject

to

cha

nge



Part number: manifold

VV100 – 3/2 block mounted solenoid valve, cassette type

type of D-sub connector

15 pins26 pins

Direction of D-sub

up

Side

Direction of supply/exhaust connections (SuP/EXh)

Standard (same direction as cylinder ports)

To the side

If mounted valves are nO, connect the pressure to port 3 (E) and exhaust from port 1 (P).

Supply/exhaust block (SuP/EXh) mounting position: u-side

Port size supply/exhaust block (SuP/EXh)

Ø4 mm, straight push-inØ6 mm, straight push-inØ4 mm angled (up) push-inØ6 mm angled (up) push-inØ4 mm angled (down) push-inØ6 mm angled (down) push-in

Mounting optionsDirect mounted valve manifold

With mounting bracket (standard)

With mounting bracket (ports down)

Electrical connection block mounting position: D-side

number of valve stations

D-sub connector 15 pins

1 station up to 14 solenoids possible

12 stations

D-sub connector 26 pins1 station up to 24

solenoids possible

12 stations

With mounting nut M3 × 0.5

4

123■

5 µm0.7 MPa (7 bar)0.15 MPa (1.5 bar)

24 VDC/0.4 WSYj300: 98 ln/min; SYj500: 196 ln/min; SYj700: 490 ln/min

SYj314M-5LOu-Q 33 g

SYj314M-5WAOu-Q 37 g

SYj300-9-1-Q M5 1

SYj300-10-2A-Q

SS3Yj3-S42-02-M5F-Q M5 2SS3Yj3-S42-04-M5F-Q M5 4SS3Yj3-S42-06-M5F-Q M5 6SS3Yj3-S42-08-M5F-Q M5 8SS3Yj3-S42-10-M5F-Q M5 10

DXT060-67-01

SYj512M-5LOu-M5-Q 47 g

SYj512M-5WAOu-M5-Q 51 g

SYj522M-5LOu-M5-Q 47 g

SYj522M-5WAOu-M5-Q 51 g

SYj512R-5LOu-M5-X20-Q 47 g

SYj512R-5WAOu-M5-X20-Q 51 g

SS3Yj5-20-02-00F-Q 2SS3Yj5-20-04-00F-Q 4SS3Yj5-20-06-00F-Q 6SS3Yj5-20-08-00F-Q 8SS3Yj5-20-10-00F-Q 10

SYj500-10-1A-Q

DXT060-67-01

Sub

ject

to

cha

nge



SyJ300, -500 & -700 – 3/2 solenoid valveMedium Air, lubricated or not lubricated


Operating temperature up to 50 °CVoltage/power

Flow

Enclosure IP50; with M8 connector IP65Manual override non-lockable (lockable on request)

LeD, surge voltage suppressor Standard

■ Compact, high flow ■ Low power consumption ■ now also with M8 connection (IP67)

Valve SyJ300 – 24 VDC

Part number Type Weight3/2 normally closed3/2 normally closed, M8 connection

Single sub platePart number Connection Stations


Part number

Sub plate – with screws and gasket

Part number Connection Stations

Blanking plug – for P-, R-channel, Rc1/8

Part number


Part number Type Weight3/2 normally closed3/2 normally closed, M8 connection3/2 normally open3/2 normally open, M8 connection3/2 normally closed, external pilot3/2 normally closed, external pilot, M8 connection

Manifold plate – type 20, with screws and gasket


Blanking plate – with screws and gasket

Part number


Part number

Valve Sub plate

Valve Manifold plate

4

124 ■

SYj712M-5LOu-01F-Q 76 g

SYj712M-5WAOu-01F-Q 80 g

SYj712R-5LOu-01F-X20-Q 76 g

SYj712R-5WAOu-01F-X20-Q 80 g

SS3Yj7-21R-02-00F-Q 2SS3Yj7-21R-03-00F-Q 3SS3Yj7-21R-04-00F-Q 4SS3Yj7-21R-06-00F-Q 6SS3Yj7-21R-08-00F-Q 8

SYj700-10-2A-1-Q

SY5000-9-1

SY100-30-4A-6 600 mmSY100-30-4A-30 3000 mm

SY100-68-A-6 600 mmSY100-68-A-30 3000 mm

WX-83S-6 600 mmWX-83S-20 2000 mm

V111-5LOu 24 VDCV111-5WOu M8, IP65 24 VDC

SY114-5LOu-Q IP50 24 VDC

Sub

ject

to

cha

nge



SyJ300, -500 & -700 – 3/2 solenoid valve


Part number Type Weight3/2 normally closed3/2 normally closed, M8 connection3/2 normally closed, external pilot3/2 normally closed, external pilot, M8 connection

Manifold plate – type 21R, with screws and gasket


Blanking plate – with screws and gasket

Part number


Part number

Connector – standard IP50 with cable


Connector – covered IP50 with cable


Connector – for M8 connection(IP65)


For more cable types, see chapter 5.

Pilot valve – spare part for valve with blue manual override button, new type

Part number Type VoltageStandard IP50

Pilot valve – spare part for valve with orange manual override button, old type

Part number Type Voltage

New SY – blue manual override button

Old SY – orange manual override button

Valve Manifold plate

4

125■

10 µm0.9 MPa (9 bar)0 MPa (0 bar)

EVT-/VO307: 196 ln/min; EVT317: 687 ln/minIP65

24 VDC

EVT307-5DO-01F-Q 150 g G1/8EVT307-5DO-02F-Q 150 g G1/4

220 VAC

EVT307-4DO-01F-Q 150 g G1/8EVT307-4DO-02F-Q 150 g G1/4

DXT152-25-1A

V31V32V30

VO307-5DO-Q 150 g G1/8

EVV307-01-022-01F-F 2EVV307-01-042-01F-F 4EVV307-01-062-01F-F 6EVV307-01-082-01F-F 8

DXT060-51-13A

V31V32V30

24 VDC

EVT317-5DO-02F-Q 300 g G1/4

220 VAC

EVT317-4DO-02F-Q 300 g G1/4

A0A6A7

Sub

ject

to

cha

nge



EVT307, VO307 & EVT317 – 3/2 solenoid valveMedium Air, lubricated or not lubricated

Degree of filtrationMax. working pressureMin. working pressureOperating temperature up to 50 °C

Voltage 24 VDC, 220 VAC –15% to +10% Power consumption DC: 4.8 W; AC (power): 12.7 VA; AC (hold): 7.6 VA

FlowEnclosure

Manual override non-lockable See also valve VKF300.

■ Direct acting, high flow ■ Individual or plate assembly

Valve EVT307 – 3/2 single assembly

Part number Weight Connection


Mounting bracket – for EVT307, with screws

Part number

Connectors – DIn43650 type B

Part number DescriptionStandard24 VDC, LED, surge voltage suppressor220 VAC, LED, surge voltage suppressor

Valve VO307 – 3/2 sub plate assembly, 24 VDC


Sub plate – for VO307, G1/8

Part number Stations

Blanking plate – for VO307, with gasket and screws

Part number

Connectors – DIn43650 type B


Valve EVT317 – 3/2 single assembly





4

126 ■


200 ln/minIP50

VKF332-5DZ-M5-QVKF334-5DZ-QVKF300-S-01FVKF300-13A-2

VKF - D332 -Z

332

333

334

M5 M5 × 0.801F

3 110 VAC4 220 VAC5 24 VDC

GhD

DO

5 M5

VyWE

S

Z

01 20

VV3 KF3- -20 02 - F

F

2021

VV3 KF3- -40 04 - FS - - 01F

01 20

F

4042

S

01F G1/8C4C6

Sub

ject

to

cha

nge



VKF300 – 3 port direct operated solenoid valveMedium Compressed air

Degree of filtrationMax. working pressureMin. working pressure 0 MPa (0 bar) (vacuum: –101.2 kPa)

Operating temperature up to 50 °C

Voltage/power Standard: 24 VDC (other voltages on request)/4.3W

FlowEnclosure

Manual override Standard: non-lockableLeD, surge voltage suppressor See part number

■ Compact with high flow ■ Ideal for vacuum applications■ universal, valfri flow direction

ValvePart number Type

3 port valve, body ported3 port valve for plate assemblySub plate for VKF334Mounting bracket for VKF332

Part number: valve

Design

Body ported (for single assembly)Body ported (for plate assembly)Plate assembly

Port size

G1/8 (port A)

VoltageElectrical connection

Single wire 300 mmSingle wire 600 mmWith DIn connectorFor DIn connector

Versions

StandardFor vacuumLow powerVacuum/low powerFor long energizing time

LeD/surge voltage suppressor

noneSurge voltage suppressorLED and surge voltage suppressor (D-type only)

Part number: sub plate – for body ported valve

no. of valve stations

1 station 20 stations

Options

noneW. mounting bracket

Design

Common P and RCommon P, individual R

Part number: sub plate – for plate assembly valve

no. of valve stations

1 station 20 stations

Options

noneW. mounting bracket

Only for type 40.Design

A-port in bottomA-port in side

Solenoid position

Opposite port AAbove port A

Only for type 42.

Port size

Push-in Ø41

Push-in Ø61

1. Only for type 42.

4

127■

10 µm

VP342: 1000 ln/min; VP542: 2200 ln/min; VP742: 3600 ln/min

➊3 VP3005 VP5007 VP700

➋

r

➎DC

5 24 VDC6 12 VDC

AC (50/60 hz)1 100 VAC2 200 VAC3 110 VAC [115 VAC]4 220 VAC [230 VAC]7 240 VAC

➌

K

➍

T

➏

G l M

yh

ln Mn

G yO

h

lO MO

DCAC — — —

➓Rc

F Gn nPTT nPTF

⓬

F

⓫

AB

⓭

—

X500

➑D E

➒

VP

300

VP

500

VP

700

01 1/8 ✔ — —

02 1/4 ✔ ✔ —

03 3/8 — ✔ ✔04 1/2 — — ✔

VP - 53 42 1-G 01 A - -➊ ➋ ➌ ➍ ➎ ➏ ➐ ➑ ➒ ➓ ⓫ ⓬ ⓭

➐ DC AC

✔ ✔S ✔ —1

Z ✔ ✔r ✔ —

u ✔ —

Sub

ject

to

cha

nge



VP – 3/2 solenoid valve, body portedMedium Air, lubricated or not lubricated

Degree of filtrationMax. working pressure 0.7 MPa (7 bar); high pressure 1 MPa (10 bar)Min. working pressure 0.2 MPa (2 bar); external pilot –100 kPa

Operating temperature –10 to 50 °CAmbient temperature –10 to 50 °C

Voltage/power 24 VDC/1.5 W; for others, see part number

Flow

Enclosure IP40; DIn connector: IP65Manual override Standard: lockable; see part number

Choose VG342 for larger flow.

■ Robust design ■ Large flow rates ■ Easy to change nC or nO

See VPA for air operated version.

Series

Pilot type

Internal pilotExternal pilot

rated voltage

Pressure specification

Standard (0.7 MPa)High pressure (1.0 MPa)

Solenoid specification

StandardWith energy saving cir-cuit, 0.55 W (DC only)

Choose energy saving type if valve will be energized for a long time. T-type can be chosen for DC only. If T-type is chosen, the only LED/surge voltage suppressor available is type Z. (When DIN type electrical connection w/o connector is used, only YOS can be chosen.)

Part number: solenoid valve

Electrical connection

Single wire l connector M connectorDIn connector (En175301-803)

Wire length 300 mm

With wire (300 mm)

With wire (300 mm)

IP65 enclosure

With connectorWire length 600 mm

Without wire Without wire

Without LED/ surge voltage suppressor

Wire length 300 mm

W/o connector

Wire length 600 mm

W/o connector W/o connector

Thread type

Mounting bracket

Without bracketWith bracket

Valve function

nC (normally closed)nO (normally open)

Made to order

Pilot exhaust port with thread (M3)

Manual override

non-lockable push type Push-turn for screwdriver Push-turn with arm

Port size

Siz

e

Only DIn connector type available for AC voltage. See “electrical con-nection” for detailed specifications.

lED/surge voltage suppressor

Without LED and surge voltage suppressor

With surge voltage suppressor

With LED and surge voltage suppressor

With surge voltage suppressor (bipolar)

W/o LED and surge voltage suppressor (bipolar)1. S-version is not available for AC type, since rectifier protects against surges. For DIN connector: Since connector comes with LEDs, versions YOZ or YOu are not available.


4

128 ■

nC

nO

VP342K-5YOD1-02FA 1000 ln/min 190 g G1/4VP542K-5YOD1-03FA 2200 ln/min 430 g G3/8VP742K-5YOD1-04FA 3600 ln/min 750 g G1/2

VP342RK-5YOD1-02FA 1000 ln/min 190 g G1/4VP542RK-5YOD1-03FA 2200 ln/min 430 g G3/8VP742RK-5YOD1-04FA 3600 ln/min 750 g G1/2

V200-63-1X32X30

VP300-227-1AVP500-227-1AVP700-227-1A

V212-5V212K-5V212-6V212K-6V212-4V212K-4

Sub

ject

to

cha

nge



Normally closed (NC)

Normally open (NO)

Function1 P connection A connection r connectionConnection compressed air

Connection cylinder Exhaust

Exhaust Connection cylinder

Connection compressed air

1. Valve function can be change by rotating valve end plate.

Valve, high pressure 1 MPa – 3/2, 24 VDC

Part number Flow Weight Conn.

With external pilot

Part number Flow Weight Conn.

Connector – DIn43650 type B

Part number DescriptionStandard AC/DC without LEDDC with LED, bipolar 24 VDCAC with neon light, 230 VAC

Mounting bracketPart number Description

VP342 (including 2 screws)VP542 (including 2 screws)VP742 (including 2 screws)

Pilot valve – DIn43650 type B

Part number VoltageStandard (0.7 MPa) 24 VDCHigh pressure (1.0 MPa) 24 VDCStandard (0.7 MPa) 12 VDCHigh pressure (1.0 MPa) 12 VDCStandard (0.7 MPa) 230 VACHigh pressure (1.0 MPa) 230 VAC

Note! Connector ordered separately.

VP – 3/2 solenoid valve, body ported

Example X

2A

NC

X

2A

NO

4

129■


1/2: 7600 ln/min; 3/4: 9800 ln/min; 1: 13100 ln/min

VG342-5DZ-04FA-Q 7400 ln/min 1.1 kgVG342-5DZ-04FB-Q 7400 ln/min 1.1 kgVG342R-5DZ-04FA-Q 7400 ln/min 1.1 kgVG342R-5DZ-04FB-Q 7400 ln/min 1.1 kgVG342-5DZ-06FA-Q 9800 ln/min 1.1 kgVG342-5DZ-06FB-Q 9800 ln/min 1.1 kgVG342R-5DZ-06FA-Q 9800 ln/min 1.1 kgVG342R-5DZ-06FB-Q 9800 ln/min 1.1 kgVG342-5DZ-10FA-Q 13100 ln/min 1.1 kgVG342-5DZ-10FB-Q 13100 ln/min 1.1 kgVG342R-5DZ-10FA-Q 13100 ln/min 1.1 kgVG342R-5DZ-10FB-Q 13100 ln/min 1.1 kg

VO307-5DO-X84-QVO307-4DO-X84-Q

Sub

ject

to

cha

nge



VG342 – solenoid valve, body ported, IP65



Min. working pressure Standard: 0.2 MPa (2 bar); external pilot: –101.2 kPa


Voltage/power Standard: 24 VDC (other voltages on request)/5 W

Flow

Enclosure IP65 (with DIn connector)Manual override Standard: non-lockable

LeD, surge voltage suppressor Standard, valve has no polarity

■ Compact and low weight ■ Low power consumption ■ Also suitable for vacuum and low pressure (external pilot) ■ Easy to change function, nC to nO or external pilot■ With external pilot, flow direction through valve can be chosen freely

ValvePart number Type Flow Weight

3/2 normally closed, G1/23/2 normally open, G1/23/2 normally closed, external pilot, G1/23/2 normally open, external pilot, G1/23/2 normally closed, G3/43/2 normally open, G3/43/2 normally closed, external pilot, G3/43/2 normally open, external pilot, G3/43/2 normally closed, G13/2 normally open, G13/2 normally closed, external pilot, G13/2 normally open, external pilot, G1

Pilot valve – spare part

Part number Type24 VDC/5 W, for DIn43650B connector220 VAC, for DIn43650B connector

Normally closed

Normally open

External pilot

1 3

1 3

2

2

1 X3

21 3

1 3

2

2

1 X3

21 3

1 3

2

2

1 X3

2

4

130 ■

VQ20 VQ30

5 µm0.6 MPa (6 bar) 0.5 MPa (5 bar)0.01 MPa (0.1 bar)

24 VDC/2.5 W 24 VDC/2.5 W390 ln/min 780 ln/minIP65

VQ21A1-5YZ-C6-F-Q 46 gVQ21M1-5YZ-C6-Q 46 g

VV2Q22-02-00F-Q G3/8 2VV2Q22-04-00F-Q G3/8 4VV2Q22-06-00F-Q G3/8 6VV2Q22-08-00F-Q G3/8 8

AXT835-35A-1

VQ31A1-5YZ-C10-F-Q 80 gVQ31M1-5YZ-C10-Q 80 g

VV2Q32-02-00F-Q G3/8 2VV2Q32-04-00F-Q G3/8 4VV2Q32-06-00F-Q G3/8 6VV2Q32-08-00F-Q G3/8 8

AXT837-35A

AXT835-13A VQ20AXT837-13A VQ30

VVQZ100-DB-5

K43

Sub

ject

to

cha

nge



VQ20 & -30 – 2/2 solenoid valveType

Medium Air or neutral gasesDegree of filtration


Operating temperature –10 to 50 °C (low temperature use requires thoroughly dried air)

Voltage/powerFlow

EnclosureManual override Options

LeD, surge voltage suppressor LED in connector, surge voltage suppressor standard

■ Lifetime of more than 20 000 000 cycles ■ Quick response time – VQ20: 5 ms; VQ30: 20 ms■ Ideal for blowing applications

Valve VQ20 – 2/2

Part number Connection WeightTubing, Ø6Plate assembly, Ø6

Connector included.



Part number

Valve VQ30 – 2/2

Part number Connection WeightTubing Ø10Plate assembly, Ø10

Connector included.



Part number

Bracket – for single assembly

Part number Fits

DIn rail mount – 2 pieces per pack

Part number

DIn connectorPart number

4

131■

3/2 VM1000 3/2 EVM130 5/2 EVZM550 3/2 VhK 4/2, 4/3 Vh

10 µm

1 MPa (10 bar) 0.7 MPa (7 bar) 1 MPa (10 bar)

0 MPa (0 bar) 0.15 MPa (1.5 bar) 0 MPa (0 bar)

54 ln/min 137 ln/min 588 ln/min G1/8 G1/8

VM1000-4nu-00VM1000-4nu-01VM1000-4nu-32B

EVM130-F01-00EVM131-F01-01EVM131-F01-01SEVM130-F01-33EVM130-F01-34B

EVM230-F02-40

EVM430-F01-30R-C1

EVM830-F01-01EVM830-F01-13EVM830-F01-14

EVZM550-F01-00EVZM550-F01-01EVZM550-F01-01SEVZM550-F01-33EVZM550-F01-34B

Sub

ject

to

cha

nge



VM, EVM, EVZM, VhK, Vh & Vr – mechanical, manual valves

TypeMedium Air, lubricated or not lubricated

Degree of filtrationMax. working

pressure


Operating temperature 5 to 60 °CFlow See below

Connection Tubing Ø4 See below

Valve VM1000 – 3/2

Part number ActuatorStandard, pinRollerPush button

Valve EVM130 – 3/2

Part number ActuatorStandard, pinRoller, plasticRoller, steelPush buttonKnob

34B is bi stable, others monostable. Knob is black, push button is black, red or green. For other actuators, contact SMC.


Part number ActuatorFoot pedal


Part number ActuatorEmergency stop

Valve VM830 – 3/2

Part number ActuatorRoller leverAdjustable roller leverAdjustable spike

Valve EVZM550 – 5/2

Part number ActuatorStandard, pinRoller, plasticRoller, steelPush buttonKnob

34B is bi stable, others monostable. Knob is black, push button is black, red or green. For other actuators, contact SMC.

1

2

1 3

2

1

2

1 3

2

1

2

1 3

2

1 3

2

NCNO

OUT

1 35

24

4

132 ■

VHK3-04F-04F Ø4 185 ln/min 15 gVHK3-06F-06F Ø6 393 ln/min 16 gVHK3-08F-08F Ø8 529 ln/min 17 gVHK3-10F-10F Ø10 878 ln/min 29 gVHK3-12F-12F Ø12 954 ln/min 32 gVHK3-06F-01S Ø6–1/81 393 ln/min 23 gVHK3-08F-02S Ø8–1/41 529 ln/min 32 g

VHK-B1A VHK3-04F-04FVHK-B1A VHK3-06F-06FVHK-B1A VHK3-08F-08FVHK-B2A VHK3-10F-10FVHK-B2A VHK3-12F-12F

EVR2110-F01EVR2110-F01-X102

VR1210F-23 Ø3.2 150 ln/minVR1210F-04 Ø4 210 ln/minVR1210F-06 Ø6 420 ln/minVR1210F-08 Ø8 480 ln/minVR1220F-08 Ø8 680 ln/minVR1220F-10 Ø10 1000 ln/min

VR1211F-23 Ø3.2 100 ln/minVR1211F-04 Ø4 120 ln/minVR1211F-06 Ø6 150 ln/min

VH210-F02 G1/4 400 ln/min 420 gVH211-F02 G1/4 400 ln/min 420 gVH212-F02 G1/4 400 ln/min 420 gVH310-F03 G3/8 1100 ln/min 710 gVH311-F03 G3/8 1100 ln/min 710 gVH312-F03 G3/8 1100 ln/min 710 gVH410-F04 G1/2 3200 ln/min 1280 gVH411-F04 G1/2 3200 ln/min 1280 gVH412-F04 G1/2 3200 ln/min 1280 g

VR51-C06B III A

Sub

ject

to

cha

nge



VM, EVM, EVZM, VhK, Vh & Vr – mechanical, manual valves

Valve VhK – 3/2

Part number Connection Flow Weight

1. In-out.

Bracket – for VHK

Part number Fits

Time delay valve Vr – 3/2 (delayed onset/shut-off)

Part number Actuator FunctionKnob nC, delayed onsetKnob nC/nO, delayed shut-off

Time delay: 0.5–60 s.

logic valve Vr – tubing mountedOr function

Part number Tubing Flow

AnD function

Part number Tubing Flow

Valve Vh – 4/2, 4/3

Part number Type Conn. Flow Weight4/3 closed center4/3 exhausted center4/2 bi stable4/3 closed center4/3 exhausted center4/2 bi stable4/3 closed center4/3 exhausted center4/2 bi stable

Valve unit Vr51– for pneumatic two-hand control

Part number En 574 category

1

1

2

1

1

2

4

133■

5 µm0.71 MPa (7.1 bar)0.15 MPa (1.5 bar)

SYjA312-M3 49 ln/min 18 g M3 × 0.5SYjA322-M3 49 ln/min 18 g M3 × 0.5SYjA512-M5 196 ln/min 45 g M5 × 0.8SYjA522-M5 196 ln/min 45 g M5 × 0.8SYjA712-01F 490 ln/min 80 g G1/8SYjA722-01F 490 ln/min 80 g G1/8

EVPA342-02FA 1000 ln/min 120 g G1/4EVPA542-03FA 2300 ln/min 270 g G3/8EVPA742-04FA 4000 ln/min 640 g G1/2

SYjA3120-M3 49 ln/min 22 g M3 × 0.5SYjA3220-M3 49 ln/min 25 g M3 × 0.5SYjA3320-M3 49 ln/min 28 g M3 × 0.5SYjA3420-M3 49 ln/min 28 g M3 × 0.5SYjA3520-M3 49 ln/min 28 g M3 × 0.5SYA3120-C6 196 ln/min 44 g Ø6SYA3220-C6 196 ln/min 46 g Ø6SYA3320-C6 196 ln/min 48 g Ø6SYA3420-C6 206 ln/min 48 g Ø6SYA3520-C6 215 ln/min 48 g Ø6SYA5120-C8F 500 ln/min 82 g Ø8SYA5220-C8F 500 ln/min 87 g Ø8SYA5320-C8F 402 ln/min 93 g Ø8SYA5420-C8F 412 ln/min 93 g Ø8SYA5520-C8F 579 ln/min 93 g Ø8SYA7120-02F 883 ln/min 82 g G1/4SYA7220-02F 883 ln/min 87 g G1/4SYA7320-02F 667 ln/min 93 g G1/4SYA7420-02F 647 ln/min 93 g G1/4SYA7520-02F 932 ln/min 93 g G1/4

SYJA 3/2SYJA & SYA 5/2, 5/3

SYJA120 & SYA120

SYJA220 & SYA220

SYJA320 & SYA320

SYJA420 & SYA420

SYJA520 & SYA520

SX3000-16-1A SYA320SX5000-16-1A SYA520SX7000-16-1A SYA720

SX3000-16-2A SYA3120SX5000-16-2A SYA5120SX7000-16-2A SYA7120

Sub

ject

to

cha

nge



SyJA, SyA & VPA – 3/2, 5/2, 5/3 air operated valve

Medium Air, lubricated or not lubricatedDegree of filtration Max. working pressureMin. working pressureOperating temperature up to 60 °C

Flow See below

■ Compact, low weight ■ Lifetime of at least 50 000 000 cycles

Valve SyJA – 3/2

Part number Type Flow Weight Connectionnormally closednormally opennormally closednormally opennormally closednormally open

Valve VPA – 3/2

Part number Type Flow Weight Connectionnormally closednormally closednormally closed

For use as normally open, contact SMC for information.

Valve SyJA & SyA – 5/2, 5/3

Part number Type Flow Weight Connection5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/2 mono stable 5/2 bi stable 5/3 closed center 5/3 exhausted center 5/3 pressurized center 5/2 mono stable 5/2 bi stable 5/3 closed center 5/3 exhausted center 5/3 pressurized center 5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center

Valve VPA

SYJA32normally closed

SYJA32normally open

SYJA52 & SYJA72normally closed

SYJA52 & SYJA72normally open

VPA42normally closed

VPA42normally open

Bracket – for individual valve (side bracket)

Part number Fits

Manifold plates

Manifold plates, type 20 for SYA, see series SY3000, 5000 and 7000.For others, contact SMC.

Bracket – for individual valve (foot bracket)

Part number Fits

1 3

1 3

2

2

1 3

1 3

2

2

13

13

2

2

5 1 3

4 2

5 1 3

4 2

5 1 3

4 2

5 1 3

4 2

5 1 3

4 2

4

134 ■

5 µm0.2–0.9 MPa (2–9 bar)0.2–0.9 MPa (2–9 bar)

1/2: 7800 ln/min; 3/4: 9800 ln/min; 1: 13100 ln/min

EVGA342-04FA 7400 ln/min 1.1 kgEVGA342-04FB 7400 ln/min 1.1 kgEVGA342-06FA 9800 ln/min 1.1 kgEVGA342-06FB 9800 ln/min 1.1 kgEVGA342-10FA 13100 ln/min 1.1 kgEVGA342-10FB 13100 ln/min 1.1 kg

Sub

ject

to

cha

nge



VGA342 – air operated 3/2 valve, body ported


Pilot pressureMin. working pressure

Operating temperature –10 °C to 50 °C (dry air)

Flow

■ Easy to change function, nC to nO

ValvePart number Type Flow Weight

3/2 Air operated, normally closed, G1/23/2 Air operated, normally open, G1/23/2 Air operated, normally closed, G3/43/2 Air operated, normally open, G3/43/2 Air operated, normally closed, G13/2 Air operated, normally open, G1


Normally closed

Normally open

External pilot

1 3

1 3

2

2

1X 3

2

4

135■

80–100 mesh1.0 MPa (10 bar)

24 VDC: 0–85 mA; 12 VDC: 0–170 mA

IP40

PVQ13 -5

5 24 VDC6 12 VDC

l

l

M

O

03 M5 A-

03 0.3 mm 0.7 MPa 0–5 l/min04 0.4 mm 0.45 MPa 0–6 l/min06 0.6 mm 0.2 MPa 0–6 l/min08 0.8 mm 0.1 MPa 0–5 l/min

-

AFKM

h

M5

Sub

ject

to

cha

nge



PVQ10 – proportional flow valveMedium Air and inert gases


Max. differential pressure (port 1 to 2) See table belowMin. differential pressure 0 MPa (0 bar); vacuum 0.1 Pa (abs)

Operating temperature 0 to 50 °CAmbient temperature 0 to 50 °C

Voltage/powerFlow See table below

Orifice See table belowEnclosure

Part number: proportional flow valve

Voltage


L connector

M connector

Connecting wire

With connecting wireWithout connecting wire

Orifice diameter

Orifice diameter


Flow range1

1. At max. working pressure.

normally closed Body/seal material

Body SealC36 (brass)Stainless steel

Port size

Without sub plate (with mounting screws M1.7 × 17L, 2 pcs.)

With sub plate M5 × 0.8


4

136 ■

80–100 mesh1.0 MPa (10 bar)

24 VDC: 0–165 mA; 12 VDC: 0–330 mA

IP40

5 24 VDC6 12 VDC

F

RcF Gn nPTT nPTF

01

16 1.6 mm 0.7 MPa 0–100 l/min23 2.3 mm 0.35 MPa 0–100 l/min40 4 mm 0.12 MPa 0–75 l/min

PVQ33 5- - 16 - 01 -

PVQ31 5 G

G

- - 16 - 01 - -

FKMh

Sub

ject

to

cha

nge




PVQ30 – proportional flow valveMedium Air and inert gases


Max. differential pressure (port 1 to 2) See table belowMin. differential pressure 0 MPa (0 bar)/vacuum 0.1 Pa (abs)

Operating temperature up to 50 °CAmbient temperature up to 50 °C

Voltage/powerFlow See table below

Orifice See table belowEnclosure

Part number: proportional flow valve

Voltage

Options

noneFoot bracket1

1. Foot bracket not mounted, but included.

Thread type (with sub plate)

Port size

Without sub plate (with mounting screws M3 × 8L, 2 pcs.)

With sub plate 1/8 (6 A)

Orifice diameter

Orifice diameter

Max. working pressure Flow range1

1. At max. working pressure.

Body ported

Plate assembly

Electrical connection: single wire

normally closed

normally closed Port size 1/8

Body/seal material

Body SealC37 (brass)Stainless steel

4

137■

lVC20 lVC30 lVC40 lVC50

0–0.5 MPa (0–5 bar) 0–0.4 MPa (0–4 bar)

0.3–0.5 MPa (3–5 bar)

6 mm 10 mm 12 mm 19 mm0.35 1.7 2.5 6

lVA10 lVA20 lVA30 lVA40 lVA50

0–0.5 MPa (0–5 bar) 0–0.4 MPa (0–4 bar)

0.3–0.5 MPa (3–5 bar)

1/8, 1/4 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/40.07 0.35 1.7 3.3 6

Sub

ject

to

cha

nge



lVC – 2/2 air operated chemical valveModel

Medium Acids, bases, ultrapure waterhygiene Packed in clean room class 10,000 at bench class 100

Working pressure

Pilot pressureOperating temperature 0 to 60 °C

Medium temperature 0 to 100 °Ctubing outer diameter

Cv factor For fittings and tubing, see chapter 10: LQ and TL.

■ Body of PFA ■ unique integrated fittings ■ Manufactured in clean room environment

lVA – 2/2 air operated chemical valveModel

Medium Acids, bases, ultrapure waterhygiene Packed in clean room class 10,000

Working pressure


Medium temperature 0 to 100 °CPort sizeCv factor

For fittings and tubing, see chapter 10: LQ and TL.

■ Body of PFA, PPS or stainless ■ Manufactured in clean room environment ■ Threaded connections



4

138 ■

lVh20 lVh30 lVh40 lVh20 lVh30 lVh40

0–0.5 MPa (0–5 bar)

6 mm 10 mm 12 mm 1/8, 1/4 1/4, 3/8 3/8, 1/20.35 1.7 2.5 0.35 1.7 3.3

lVQ20 lVQ30 lVQ40 lVQ50 lVQ60

0.3–0.5 MPa (3–5 bar)

6 mm 10 mm 12 mm 19 mm 25 mm0.35 1.3 1.9 5 8

Sub

ject

to

cha

nge



LVH – 2/2 manually operated chemical valveModel

Medium Acids, bases, ultrapure waterhygiene packaging,

clean roomClass 10,000, bench class 100 Class 10,000

Working pressureDesign Lever type actuator (non-lockable/lockable)

Medium/operating temperature 0 to 60 °CConnection type With integrated fittings With internal pipe threads

tubing outer diameter/port sizeCv factor

For fittings and tubing, see chapter 10: LQ and TL.

■ Body of PFA, PPS or stainless ■ Unique integrated fittings (PFA) ■ Manufactured in clean room environment

lVQ – 2/2 air operated corrosion resistant chemical valve

ModelMedium Acids, bases, ultrapure waterhygiene Packed in clean room class 10,000 at bench class 100

Working pressure –98 kPa to 0.5 MPa (5 bar) –98 kPa to 0.4 MPa (4 bar)


Medium temperature 0 to 100 °Ctubing outer diameter

Cv factor For fittings and tubing, see chapter 10: LQ and TL.

■ Body of PFA ■ Unique integrated fittings ■ Manufactured in clean room environment ■ Metal-free exterior



4

139■

lVM09/09r3 lVM09r4 lVM095r

nC nO2 3

1.1 mm0.01818 µl

20 g2 W9.5 mm

lVM11 lVM10r1 lVM10r2 lVM102r lVM10r3 lVM10r4 lVM10r6 lVM105r

nC nC nO nC nO nC2 2 3 2 3

0–0.25 MPa (2.5 bar)1.5 mm 1.4 mm0.04 0.0311 µl 20 µl

30 g 34 g 1.5 W

13 mm

Kalrez® is a registered trademark of DuPont Performance Elastomers

Sub

ject

to

cha

nge



lVM09/090 – 2/3 port direct operated solenoid valve for chemistry & analysis

TypeValve design Direct operated seat valve with isolating diaphragm, lever type

Valve function universalnumber of ports

Medium Air, water, clean water, solvents and cleaning agentsWorking pressure –75 kPa to 0.2 MPa (2 bar)

Orifice diameterFlow factor (Cv)Internal volume

Isolating diaphragm EPDM, FKM or Kalrez®Weight

Power consumptionValve width

■ Low dead volume ■ Small dimensions ■ Lifetime of at least 10 000 000 cycles ■ Low weight■ Low power consumption ■ Applications: analysis and testing instruments

lVM10/100 – 2/3 port direct operated solenoid valve for chemistry & analysis

TypeBody ported With tubing connections in body Plate assembly

Valve design Direct operated seat valve with isolating diaphragm Direct operated seat valve with isolating diaphragm, lever type

Valve function universal universalnumber of ports

Medium Air, water, clean water, solvents and cleaning agentsWorking pressure –75 kPa to 0.25 MPa (2.5 bar)


Body material PFA or PEEKIsolating diaphragm EPDM, FKM or Kalrez®

Weight

Power consumption Onset: 2.5 WHolding: 1 W

Valve width

■ Low dead volume ■ Small dimensions■ Lifetime of at least 10 000 000 cycles■ Low weight ■ Low power consumption■ Applications: analysis and testing instruments



4

140 ■

lVM15r3 lVM15r4 lVM155r lVM20r3 lVM20r4 lVM205r

nC nO nC nO2 3 2 3

1.6 mm; (1 mm) 2 mm0.04; (0.015) 0.06550 µl 8 µl

45 g 80 g2.5 W

16 mm 20 mm

Kalrez® is a registered trademark of DuPont Performance Elastomers

Sub

ject

to

cha

nge



LVM15/150 & -20/200 – 2/3 port direct operated solenoid valve for chemistry & analysis

TypePlate assembly

Valve design Direct operated seat valve with isolating diaphragm, lever typeValve function universal universal

number of portsMedium Air, water, clean water, solvents and cleaning agents

Working pressure –75 kPa to 0.25 MPa (2.5 bar); (0–0.6 MPa) –75 kPa to 0.3 MPa (3.0 bar)


Body material PFA or PEEKIsolating diaphragm EPDM, FKM or Kalrez®

WeightPower consumption Onset: 5.5 W; holding: 1 W

Valve width

■ Low dead volume ■ Small dimensions ■ Lifetime of at least 10 000 000 cycles ■ Low weight■ Low power consumption ■ Applications: analysis and testing instruments


4

141■

0.0 MPa (0 bar)

24 VDC, 110 VAC, 230 VAC/ VDW10: 2.5 W; VDW20 & VDW30: 3 W

24 VDC

VDW11-5W-1-M5-Q 0.9 MPa M5 0.03 1 mm 0.08 kgVDW21-5W-1-01F-Q 0.7 MPa G1/8 0.07 1.6 mm 0.1 kgVDW21-5W-1-M5-Q 0.7 MPa M5 0.07 1.6 mm 0.1 kgVDW31-5W-2-01F-Q 0.8 MPa G1/8 0.16 2 mm 0.23 kgVDW31-5W-2-02F-Q 0.8 MPa G1/4 0.16 2 mm 0.26 kgVDW31-5W-3-01F-Q 0.4 MPa G1/8 0.28 3 mm 0.23 kgVDW31-5W-3-02F-Q 0.4 MPa G1/4 0.28 3 mm 0.26 kgVDW31-5W-4-02F-Q 0.2 MPa G1/4 0.44 4 mm 0.26 kg

220 VAC

VDW11-4W-1-M5-Q 0.9 MPa M5 0.03 1 mm 0.08 kgVDW21-4W-1-01F-Q 0.7 MPa G1/8 0.07 1.6 mm 0.1 kgVDW21-4W-1-M5-Q 0.7 MPa M5 0.07 1.6 mm 0.1 kgVDW31-4W-2-01F-Q 0.8 MPa G1/8 0.16 2 mm 0.23 kgVDW31-4W-2-02F-Q 0.8 MPa G1/4 0.16 2 mm 0.26 kgVDW31-4W-3-01F-Q 0.4 MPa G1/8 0.28 3 mm 0.23 kgVDW31-4W-3-02F-Q 0.4 MPa G1/4 0.28 3 mm 0.26 kgVDW31-4W-4-02F-Q 0.2 MPa G1/4 0.44 4 mm 0.26 kg

24 VDC

VDW11-5W-1-M5-H-Q 0.9 MPa M5 0.03 1 mm 0.08 kgVDW21-5W-1-01F-H-Q 0.7 MPa G1/8 0.07 1.6 mm 0.1 kgVDW31-5W-2-01F-H-Q 0.8 MPa G1/8 0.16 2 mm 0.23 kgVDW31-5W-3-02F-H-Q 0.4 MPa G1/4 0.28 4 mm 0.26 kg

220 VAC

VDW11-4W-1-M5-H-Q 0.9 MPa M5 0.03 1 mm 0.08 kgVDW21-4W-1-01F-H-Q 0.7 MPa G1/8 0.07 1.6 mm 0.1 kgVDW31-4W-2-01F-H-Q 0.8 MPa G1/8 0.16 2 mm 0.23 kgVDW31-4W-3-02F-H-Q 0.4 MPa G1/4 0.28 4 mm 0.26 kg

Sub

ject

to

cha

nge



VDW10, -20 & -30 – 2/2 solenoid valve for water & air

Medium Water and airDegree of filtration Suitable filter: 80–100 mesh

Max. working pressure 0.9 MPa (9 bar); see table below for detailed information

Min. working pressureOperating temperature 1 to 50 °C

Voltage/power

Cv factor up to 0.38; see table below for detailed information

Enclosure now IP65 as standardManual override Optional

LeD, surge voltage suppressor not available

■ Available for manifold mounting (contact SMC)■ Also in stainless steel ■ Excellent for dental and instrument applications■ For version with flat pin connectors, contact SMC.

Valve – normally closed, brass body, nBR seal

Part number Pressure Connection Cv factor Orifice Weight


Valve – normally closed, stainless body, FKM seal



4

142 ■

0.0 MPa (0 bar)

24 VDC, 110 VAC, 230 VAC/VDW200: 2.5 W; VDW300: 3 W

IP40

24 VDC

VDW250-5G-1-M5-Q M5 0.03 1 mm 0.12 kgVDW250-5G-1-01F-Q G1/8 0.03 1 mm 0.12 kgVDW350-5G-2-01F-Q G1/8 0.16 2 mm 0.27 kgVDW350-5G-2-02F-Q G1/4 0.16 2 mm 0.3 kgVDW350-5G-3-02F-Q G1/4 0.28 3 mm 0.3 kg

220 VAC

VDW250-4G-1-M5-Q M5 0.03 1 mm 0.12 kgVDW250-4G-1-01F-Q G1/8 0.03 1 mm 0.12 kgVDW350-4G-2-01F-Q G1/8 0.16 2 mm 0.27 kgVDW350-4G-2-02F-Q G1/4 0.16 2 mm 0.3 kgVDW350-4G-3-02F-Q G1/4 0.28 3 mm 0.3 kg

24 VDC

VDW250-5G-1-M5-H-Q M5 0.03 1 mm 0.12 kgVDW350-5G-2-01F-H-Q G1/8 0.16 2 mm 0.27 kgVDW350-5G-2-02F-H-Q G1/4 0.16 2 mm 0.3 kg

220 VAC

VDW250-4G-1-M5-H-Q M5 0.03 1 mm 0.12 kgVDW350-4G-2-01F-H-Q G1/8 0.16 2 mm 0.27 kgVDW350-4G-2-02F-H-Q G1/4 0.16 2 mm 0.3 kg

VDW200 M5 1/8 (6A)

1 mm 0.9 MPa 0.3 MPa 1.6 mm 0.7 MPa 0.1 MPa

VDW300 1/8 (6A) 1/4 (8A)

2 mm 0.8 MPa 0.2 MPa3 mm 0.4 MPa 0.1 MPa4 mm 0.2 MPa 0.05 MPa

Sub

ject

to

cha

nge



VDW200 & -300 – 3/2 solenoid valve for water & air

Medium Water, air, vacuumDegree of filtration Suitable filter; 80–100 mesh

Max. working pressure 0.9 MPa (9 bar); see table below for detailed information

Min. working pressureOperating temperature –10 to 50 °C

Voltage/power

Cv factor up to 0.38; see table below for detailed information

EnclosureManual override not standard

LeD, surge voltage suppressor not available

■ Excellent for dental and instrument applications ■ Also in stainless steel

Valve – 3/2, brass body, nBR seal

Part number Conn.Cv

factor Orifice Weight

Part number Conn.Cv


Valve – 3/2, stainless body, FKM seal

Part number Conn.Cv


Part number Conn.Cv


Max. differential pressure

Valve type Port sizeOrifice

diameterMax. differential pressure

Port 1 Port 2 & 3

1

32

4

143■

5 µm

0 MPa (0 bar)

IP65

VCA21-5D-3-02F-Q 1 MPa G1/4 0.33 3 mm 0.21 kgVCA21-5D-5-02F-Q 0.15 MPa G1/4 0.83 5 mm 0.21 kgVCA31-5D-4-02F-Q 1 MPa G1/4 0.55 4 mm 0.3 kgVCA31-5D-7-03F-Q 0.15 MPa G3/8 1.5 7 mm 0.3 kgVCA41-5D-5-03F-Q 1 MPa G3/8 0.83 5 mm 0.5 kgVCA41-5D-7-03F-Q 0.3 MPa G3/8 1.5 7 mm 0.5 kgVCA41-5D-10-04F-Q 0.15 MPa G1/2 2.11 10 mm 0.5 kg

VCA23-5D-3-Q 1 MPa — 0.33 3 mm 0.21 kgVCA23-5D-5-Q 0.15 MPa — 0.83 5 mm 0.21 kgVCA35-5D-4-03F-Q 1 MPa G3/8 0.5 4 mm 0.3 kgVCA35-5D-7-03F-Q 0.3 MPa G3/8 1.5 7 mm 0.3 kgVCA45-5D-5-04F-Q 1 MPa G1/2 0.54 5 mm 0.5 kgVCA45-5D-7-04F-Q 0.3 MPa G1/2 1.5 7 mm 0.5 kgVCA45-5D-10-04F-Q 0.15 MPa G1/2 2.11 10 mm 0.5 kg

VV2CA4-02F-Q 2 G1/2VV2CA4-03F-Q 3 G1/2VV2CA4-04F-Q 4 G1/2VV2CA4-05F-Q 5 G1/2VV2CA4-06F-Q 6 G1/2VV2CA4-07F-Q 7 G1/2VV2CA4-08F-Q 8 G1/2VV2CA4-09F-Q 9 G1/2VV2CA4-10F-Q 10 G1/2

VVCA20-4A

VVCA30-2A-00VVCA40-2A-00

VVCA30-6-1AVVCA40-6-1A

VV2CA2-0202F-Q 2 G1/4VV2CA2-0302F-Q 3 G1/4VV2CA2-0402F-Q 4 G1/4VV2CA2-0502F-Q 5 G1/4VV2CA2-0602F-Q 6 G1/4

VV2CA3-02F-Q 2 G3/8VV2CA3-03F-Q 3 G3/8VV2CA3-04F-Q 4 G3/8VV2CA3-05F-Q 5 G3/8VV2CA3-06F-Q 6 G3/8VV2CA3-07F-Q 7 G3/8VV2CA3-08F-Q 8 G3/8VV2CA3-09F-Q 9 G3/8VV2CA3-10F-Q 10 G3/8

VCA20-12-1AVCA30-12-1AVCA40-12-1A

Sub

ject

to

cha

nge



VCA – solenoid valve for air & inert gasesMedium Air and inert gases

Degree of filtration

Max. working pressure 1 MPa (10 bar); see table below for detailed information

Min. working pressureOperating temperature –10 to 60 °C (no freezing)

Voltage/power 24 VDC (other voltages on request)/ VCA2: 6.5 W; VCA3: 8 W; VCA4: 11.5 W

Flow See table belowEnclosure

Manual override not standard (lockable as option)LeD, surge voltage suppressor Standard, built-in

■ High flow ■ Low weight ■ Silent

Valve – normally closed, aluminium body, HnBR seal, 24 VDCSingle mounted


Manifold mounted


Sub/manifold plate – for VCA45

Part number no. of stations Connection

Blanking plate – for sub plate VCA23

Part number

Blind block – for manifold plate VCA35 & -45

Part number

Tie rods – 2 pcs., for expansion with 1 station (VCA35 & -45)

Part number

Sub/manifold plateSub plate for VCA23


Manifold plate for VCA35


Mounting bracket – for singel mounted VCA21, -31 & -41

Part number

4

144 ■

0 MPa (0 bar)

VX21 4.5 W 7 VACVX22 7 W 9.5 VACVX23 10.5 W 12 VAC

1 G1/8, 1/4

2 mmVX210

1.0 MPa 0.23/0.20250 g 3 mm 0.6 MPa 0.41/0.35

5 mm 0.2 MPa 0.62/0.53

2 G1/4, 3/8

4 mmVX220

1.0 MPa 0.62/0.53370 g

7 mm 0.15 MPa 1.08/0.92

3G1/4, 3/8

5 mm

VX230

1.0 MPa 0.75/0.64480 g 8 mm 0.3 MPa 1.58/1.35

10 mm 0.1 MPa 2.21/1.89G1/2 10 mm 0.1 MPa 2.21/1.89 500 g

1

C6 2 mm

VX210

1.0 MPa 0.23/0.20

250 g

3 mm 0.6 MPa 0.35/0.30 5 mm 0.2 MPa 0.40/0.34

C8 2 mm 1.0 MPa 0.23/0.20 3 mm 0.6 MPa 0.41/0.35 5 mm 0.2 MPA 0.56/0.48

2C8

4 mm

VX220

1.0 MPa 0.47/0.40

370 g 7 mm 0.15 MPa 0.84/0.72

C10 4 mm 1.0 MPa 0.50/0.43 7 mm 0.15 MPa 0.90/0.77

3

C10 5 mm

VX230

1.0 MPa 0.70/0.60

490 g

8 mm 0.3 MPa 1.22/1.0410 mm 0.1 MPa 1.54/1.32

C12 5 mm 1.0 MPa 0.70/0.60 8 mm 0.3 MPa 1.38/1.1810 mm 0.1 MPa 1.76/1.51

1 G1/8, 1/4

2 mmVX21

1.0 MPa 0.23/0.20330 g 3 mm 0.6 MPa 0.42/0.36

5 mm 0.2 MPa 0.63/0.54

2 G1/4, 3/8

4 mmVX22

1.0 MPa 0.63/0.54490 g

7 mm 0.15 MPa 1.08/0.92

3G1/4, 3/8

5 mm

VX23

1.0 MPa 0.75/0.64610 g 8 mm 0.3 MPa 1.58/1.35

10 mm 0.1 MPa 2.21/1.89G1/2 10 mm 0.1 MPa 2.21/1.89 660 g

Sub

ject

to

cha

nge



new VX21, -22 & -23 – normally closed, 2 port direct operated solenoid valve

Medium Air, water, medium vacuum, oil and neutral media1

Body material Plastic, aluminium, brass or stainless steel

Seal material nBR or FKM depending on chosen material for valve body

Degree of filtration Suitable filter: 80–100 mesh

Max. static pressure 2.0 MPa (20 bar); Plastic valve body: 1.5 MPa (15 bar)

Max. differential pressure See table belowMin. differential pressure

Medium temperature 1 to 60°CAmbient temperature –20 to60°C

VoltageStandard 24 VDC, or 230 VAC with built-in full-wave rectifier; other voltages on request

Power consumption See table belowFlow factor (Cv/Kv) See table below

Enclosure IP65 (with DIn43650A connector, including surge voltage supressor)

Diode Optional 1. Contact SMC for advice for other media than air or water, other pressures, voltages or temperatures.

Size Power consumption DC Power consumption AC

For air: aluminium valve body

Size Conn. Orifice ModelMax. diff. pressure

Cv/Kv factor Weight

For air: plastic valve body – with molded push-in fittings


Cv/Kv factor Weight

Valve specifications

For water, oil, vacuum or other neutral media: brass or stainless steel valve body


Cv/Kv factor Weight

4

145■

1

A1/8

2 mmB 3 mmC 5 mmD

1/4 2 mm

E 3 mmF 5 mmh 2 mmJ 3 mmK 5 mml 2 mmM 3 mmn 5 mm

2

A1/4

4 mmB 7 mmD

3/8 4 mm

E 7 mmh 4 mmJ 7 mml 4 mmM 7 mm

3

A1/4

5 mmB 8 mmC 10 mmD

3/8 5 mm

E 8 mmF 10 mmG 1/2 10 mmh 5 mmJ 8 mmK 10 mml 5 mmM 8 mmn 10 mm

G 24 VDCl 230 VAC

VX2 0 AA l1

1

A

C37

1/8 2 mm

B 3 mmC 5 mmD

1/4 2 mm

E 3 mmF 5 mmh

1/8 2 mm

J 3 mmK 5 mml

1/4 2 mm

M 3 mmn 5 mm

2

A

C371/4

4 mmB 7 mmD

3/8 4 mm

E 7 mmh

1/4 4 mm

J 7 mml

3/8 4 mm

M 7 mm

3

A

C37

1/4 5 mm

B 8 mmC 10 mmD

3/8 5 mm

E 8 mmF 10 mmG 1/2 10 mmh

1/4 5 mm

J 8 mmK 10 mml

3/8 5 mm

M 8 mmn 10 mmP 1/2 10 mm

VX2

2 nBR3

FKM4

G 24 VDCl 230 VAC

21 A l A

Sub

ject

to

cha

nge



new VX21, -22 & -23 – normally closed, 2 port direct operated solenoid valve

Part number: for air Part number: for water, oil, vacuum

Size Material, connection and orifice

Size Body material Connection Orifice

Aluminium

Plastic

Ø6 push-in fitting

Ø8 push-in fitting

Aluminium

Plastic

Ø8 push-in fitting

Ø10 push-in fitting

Aluminium

Plastic



Medium: air


Voltage TypeDIn connector

G thread

Size Material, connection and orifice

Size Body material Connection Orifice

Stainless steel

Stainless steel

Stainless steel

Medium

Medium SealWaterOilVacuum


Voltage TypeDIn connector

G thread

4

146 ■

80–100 mesh

0 MPa (0 bar)

nBR

B

—

A FKMB EPDMC PTFED FKM

HE EPDMG nBR

B

h FKMJ EPDMK PTFE

l FKM1

M FKM1

n FKM

H—

P EPDMQ PTFES PTFEV FKM1 B

B J— JA hA h

S Q

E P

V MA hV MV ME P

Sub

ject

to

cha

nge



VX21, -22 & -23 – 2 port direct operated solenoid valve

Medium Water, oil, steam and neutral mediaDegree of filtration

Max. working pressure See tables belowMin. working pressure

Operating temperature See tables belowVoltage/power Standard: 24 VDC, 230 VAC

Cv factor See tables belowEnclosure IP65 with DIn connector

Manual override not standardLeD, surge voltage suppressor Optional

All options

Option symbol Seal

Body/ short-circuit ring

Solenoid insulation note

Brass/copper

Stainless steel/silver

Extra corrosion-resistant, oil-freeLeakage-free, oil-free

Steam (max. 183 °C)Brass/

copper Leakage-free, oil-free1. L-, M- and V-options are treated to become oil-free. Contact SMC for plate mounted versions.

Check list for media compatibility

Medier and options

MediumOption symbol and body material

Brass Stainless steelEthanolCaustic soda (25% ≥)GasSilicone oilSteam (steam [max. 183 °C])Steam (condensate [max. 99 °C])Vacuum (up to 0.1 Pa abs)PerchloroethyleneHeliumLeakage-free (10–6 Pa × m3/s)Hot water (max. 99 °C)

Leakage rate (10–6 Pa × m3/s) for V- and M-options apply when differential pressure is 0.1 MPa. For use of other media, contact SMC.

VX series now also available with built-in strainer, series VXK21, -22 & -23 (see following pages).

VX is also available in a power saving design, series VXE21, -22 & -23. Contact SMC for details.■ Power consumption reduced by 2⁄3 ■ Easy to order: VX is replaced with VXE ■ Reduced operating costs ■ Longer life ■ Reduced environmental impact ■ Meets RoHS requirements

This valve series is now available in new versions with technical improvements:■ Built-in damper for quiet operation and long life ■ Increased flow performance ■ Fewer seat sizes, which simplifies proper valve selection■ Reduced weight and size

Stainless steel valve bodies are available as an alternative to both the new and the old versions. Contact SMC for more information.

The new versions with the valve in brass, aluminum, and plastic

4

147■

AC DC AC DC

1/8 (6A) 2 mm VX2110-01 2 MPa 1.5 MPa 1.5 MPa 1.5 MPa 0.17

3 MPa

300 g 3 mm VX2120-01 0.9 MPa 0.5 MPa 0.5 MPa 0.5 MPa 0.33

4.5 mm VX2130-01 0.4 MPa 0.2 MPa 0.2 MPa 0.15 MPa 0.61

1/4 (8A)

2 mm VX2110-02 2 MPa 1.5 MPa 1.5 MPa 1.5 MPa 0.17

3 mmVX2120-02 0.9 MPa 0.5 MPa 0.5 MPa 0.5 MPa

0.33VX2220-02 1.7 MPa 1.5 MPa 1.2 MPa 1.2 MPa 470 gVX2320-02 2.5 MPa 3 MPa 1.7 MPa 2 MPa 620 g

4.5 mmVX2130-02 0.4 MPa 0.2 MPa 0.2 MPa 0.15 MPa

0.61300 g

VX2230-02 0.6 MPa 0.35 MPa 0.35 MPa 0.3 MPa 470 gVX2330-02 0.85 MPa 0.9 MPa 0.55 MPa 0.85 MPa 620 g


1.1470 g

VX2340-02 0.55 MPa 0.3 MPa 0.35 MPa 0.3 MPa 620 g


1.61 MPa

560 gVX2350-02 0.17 MPa 0.2 MPa 0.14 MPa 0.2 MPa 700 g


1.9560 g


3/8 (10 A)


0.33

3 MPa

470 gVX2320-03 2.5 MPa 3 MPa 1.7 MPa 2 MPa 620 g

4.5 mmVX2230-03 0.6 MPa 0.35 MPa 0.35 MPa 0.3 MPa

0.61470 g



1.1470 g



1.6

1 MPa

560 gVX2350-03 0.17 MPa 0.2 MPa 0.14 MPa 0.2 MPa 700 g


2.2560 g


1/2 (15A) 10 mmVX2260-04 0.08 MPa 0.03 MPa 0.05 MPa 0.03 MPa

2.2560 g


1/8 (6A)2 mm VX2112-01 0.9 MPa 0.8 MPa 0.17

3 MPa

320 g3 mm VX2122-01 0.45 MPa 0.45 MPa 0.33

4.5 mm VX2132-01 0.2 MPa 0.2 MPa 0.61

1/4 (8A)

2 mm VX2112-02 0.9 MPa 0.8 MPa 0.17

3 mmVX2122-02 0.45 MPa 0.45 MPa

0.33VX2222-02 0.8 MPa 0.7 MPa 500 gVX2322-02 1.2 MPa 1 MPa 660 g

4.5 mmVX2132-02 0.2 MPa 0.2 MPa

0.61320 g

VX2232-02 0.3 MPa 0.3 MPa 500 gVX2332-02 0.6 MPa 0.6 MPa 660 g

6 mmVX2242-02 0.15 MPa 0.15 MPa

1.1500 g

VX2342-02 0.35 MPa 0.35 MPa 660 g

3/8 (10A)

3 mmVX2222-03 0.8 MPa 0.7 MPa

0.33500 g

VX2322-03 1.2 MPa 1 MPa 660 g

4.5 mmVX2232-03 0.3 MPa 0.3 MPa

0.61500 g

VX2332-03 0.6 MPa 0.6 MPa 660 g

6 mmVX2242-03 0.15 MPa 0.15 MPa

1.1500 g

VX2342-03 0.35 MPa 0.35 MPa 660 g

G, l E, P A,h D,nACDC — —

nBR, FKM, EPDM

Sub

ject

to

cha

nge



normally closed (nC)

Port sizeOrifice

diameter ModelMax. diff.pressure, water Max. diff.pressure, oil Cv

factorMax. system

pressure Weight1

1. Weight is for single wire type. Add 30 g for DIn43650 type.

normally open (nO)

Port sizeOrifice

diameter ModelMax. differential pressure Cv

factorMax. system

pressure Weight1Water Oil

1. Weight is for single wire type. Add 30 g for DIn43650 type.

Medium and ambient temperature

Power source

Medium temperature

Ambient temperature

Options for solenoid valve

1 to 60 °C 1 to 99 °C –5 to 60 °C –5 to 120 °C –20 to 60 °C1 to 40 °C –5 to 40 °C –20 to 60 °C

Normally closed

Normally open

Valve tightness (leak value)

Seal materialleak value (with water pressure)0.1 cm3/min or less


Valve specification (for water and oil)

1

2

1

2

4

148 ■

➊

21 22 231

(Ø2 mm)

2(Ø3 mm)

3(Ø4.5 mm)

4(Ø6 mm)

5(Ø8 mm)

6(Ø10 mm)

01 (1/8) — — ✔ ✔ ✔ — — —

02 (1/4) — — ✔ ✔ ✔ — — —

— 02 (1/4) 02 (1/4) — ✔ ✔ ✔ ✔ ✔— 03 (3/8) 03 (3/8) — ✔ ✔ ✔ ✔ ✔— 04 (1/2) 04 (1/2) — — — — — ✔

0.17 0.33 0.61 1.1 1.6 1.9/2.2

21 22 231

(Ø2 mm)

2(Ø3 mm)

3(Ø4.5 mm)

4(Ø6 mm)

01 (1/8) — — ✔ ✔ ✔ —

02 (1/4) — — ✔ ✔ ✔ —

— 02 (1/4) 02 (1/4) — ✔ ✔ ✔

— 03 (3/8) 03 (3/8) — ✔ ✔ ✔0.17 0.33 0.61 1.1

VX - 21 01VX - 01

➊➌ ➍ ➎ ➏

2122

02

--

11

DD

11

--

➊

➊

➋

➋

nBR BGE

EPDM HPA

FKMBh

lD

Hn

➌Rc

T nPTFF Gn nPT

➍3 110 VAC 50/60 Hz5 24 VDC6 12 VDCJ 230 VAC 50/60 Hz

➐

➎D

DZ

DO

➏

B➑

➐

AC/DC Z

AC3 110 V ✔ ✔j 230 V ✔ ✔

DC5 24 V ✔6 12 V —

➑

VX021n-12AVX2110VX2120VX2130

VX022n-12A

VX2220VX2230VX2240VX2320VX2330VX2340

VX023n-12A-L

VX2250VX2260VX2350VX2360

Sub

ject

to

cha

nge



Port size/orifice diameter – normally closed (nC)

Solenoid valve (port size) Valve orifice symbol (diameter)

Model

Port size symbol

(port size)

Flow capacity, Cv factor

normally open (nO)


Model

Port size symbol

(port size)


Part number: valves for water and oil

Model See table for availability


normally open (nO)

Orifice diameter See table for availability

Port sizeSee table for availability

Valve versionsSee table for availability

Solenoid valve options

Option symbol Seal Body/short-circuit ring

Solenoid insulation note

Brass/copperFor water

Stainless steel/silverBrass/copper

For hot water (AC only)Stainless steel/silverBrass/copper

For oil1

Stainless steel/silverFor corrosive water, oil-free

Brass/copperFor oil1

Stainless steel/silver1. Additives in the oil varies depending on manufacturer, so sealing material resistance will vary. Contact SMC when in doubt.

Thread type

rated voltage

See table for availability.


DIn connectorDIn connector with surge voltage suppressor and LEDFor DIn connector (without connector)

DIn type only available with insulation class B.

Mounting bracket

noneWith bracket

See table for separate order of mounting bracket.

rated voltage – electrical connection

rated voltage Class B Class h

Voltage symbol VoltageW. lED and surge voltage suppressor

not available for DC

Part number for mounting bracket

Part number Fits


4

149■

1/8 (6A) 2 mm VX2110-01 1 MPa 0.17

1 MPa

300 g

3 mm VX2120-01 1 MPa 0.33 4.5 mm VX2130-01 0.45 MPa 0.61

1/4 (8A)

2 mm VX2110-02 1 MPa 0.17 3 mm VX2120-02 1 MPa 0.33

4.5 mmVX2130-02 0.45 MPa

0.61VX2230-02 0.75 MPa 470 gVX2330-02 1 MPa 620 g

6 mmVX2240-02 0.4 MPa

1.1470 g

VX2340-02 0.5 MPa 620 g

8 mmVX2250-02 0.15 MPa

1.60.5 MPa

560 gVX2350-02 0.2 MPa 700 g

10 mmVX2260-02 0.08 MPa

1.9560 g

VX2360-02 0.1 MPa 700 g

3/8 (10 A)

3 mm VX2220-03 1 MPa 0.33

1 MPa

470 g

4.5 mmVX2230-03 0.75 MPa

0.61470 g

VX2330-03 1 MPa 620 g

6 mmVX2240-03 0.4 MPa

1.1470 g

VX2340-03 0.5 MPa 620 g

8 mmVX2250-03 0.15 MPa

1.6

0.5 MPa

560 gVX2350-03 0.2 MPa 700 g

10 mmVX2260-03 0.08 MPa

2.2560 g

VX2360-03 0.1 MPa 700 g

1/2 (15A) 10 mmVX2260-04 0.08 MPa

2.2560 g

VX2360-04 0.1 MPa 700 g

1/8 (6A)2 mm VX2112-01 1 MPa 0.17

1 MPa

320 g3 mm VX2122-01 0.7 MPa 0.33

4.5 mm VX2132-01 0.3 MPa 0.61

1/4 (8A)

2 mm VX2112-02 1 MPa 0.17

3 mmVX2122-02 0.7 MPa

0.33VX2222-02 1 MPa 500 g

4.5 mmVX2132-02 0.3 MPa

0.61320 g

VX2232-02 0.45 MPa 500 gVX2332-02 0.8 MPa 660 g

6 mmVX2242-02 0.25 MPa

1.1500 g

VX2342-02 0.45 MPa 660 g

3/8 (10A)

3 mm VX2222-03 1 MPa 0.33500 g

4.5 mmVX2232-03 0.45 MPa

0.61VX2332-03 0.8 MPa 660 g

6 mmVX2242-03 0.25 MPa

1.1500 g

VX2342-03 0.45 MPa 660 g

S, QAC 183 °C

PTFE

Sub

ject

to

cha

nge




Port sizeOrifice

diameter ModelMax. diff. pressure Cv factor

Max. system pressure Weight1

1. Weight is for single wire type. Add 60 g for terminal box type.

normally open (nO)

Port sizeOrifice

diameter ModelMax. diff. pressure Cv factor

Max. system pressure Weight1

1. Weight is for single wire type. Add 60 g for terminal box type.

Medium- and ambient temperature

Power source

Medium temperature

Ambient temperature

Options for solenoid valve

–20 to 60 °C

Normally closed

Normally open

Valve tightness (leak value)Seal material leak value (with air pressure)

300 cm3/min or less


Valve specification (for steam)

1

2

1

2

4

150 ■

➊

21 22 231

(Ø2 mm)

2(Ø3 mm)

3(Ø4.5 mm)

4(Ø6 mm)

5(Ø8 mm)

6(Ø10 mm)

01 (1/8) — — ✔ ✔ ✔ — — —

02 (1/4) — — ✔ ✔ ✔ — — —

— 02 (1/4) 02 (1/4) — ✔ ✔ ✔ ✔ ✔— 03 (3/8) 03 (3/8) — ✔ ✔ ✔ ✔ ✔— 04 (1/2) 04 (1/2) — — — — — ✔

0.17 0.33 0.61 1.1 1.6 1.9/2.2

21 22 231

(Ø2 mm)

2(Ø3 mm)

3(Ø4.5 mm)

4(Ø6 mm)

01 (1/8) — — ✔ ✔ ✔ —

02 (1/4) — — ✔ ✔ ✔ —

— 02 (1/4) 02 (1/4) — ✔ ✔ ✔— 03 (3/8) 03 (3/8) — ✔ ✔ ✔

0.17 0.33 0.61 1.1

VX - 21 01VX - 01

➊➌ ➍ ➎ ➏

2122

02

--

33

GG

11

--

➊

➊

➋

➋

SPTFE H

Q

➌Rc

T nPTFF Gn nPT

➍3 110 VAC 50/60 HzJ 230 VAC 50/60 Hz

➐

➎GT

TS

TZ

➐

➏

B➑➐

AC/DC

S Z

AC3 110 V ✔ ✔j 230 V ✔ —

➑

VX021n-12AVX2110VX2120VX2130

VX022n-12A

VX2220VX2230VX2240VX2320VX2330VX2340

VX023n-12A-L

VX2250VX2260VX2350VX2360

Sub

ject

to

cha

nge



Port size/orifice diameter – normally closed (nC)


Port size symbol

(port size)


normally open (nO)


Model

Port size symbol

(port size)


Part number: valves for steam

Model See table for availability


normally open (nO)

Orifice diameter See table for availability

Port sizeSee table for availability

Valve versionsSee table for availability

Solenoid valve options

Option symbol Seal Body/short-circuit ring

Solenoid insulation

BrassStainless steel

Thread type

rated voltage

See table for availability.


Single wireWith terminal boxWith terminal box and integrated surge voltage suppressorWith terminal box and integrated surge voltage suppressor and LED

See table for available combinations between each electrical option (S, Z) and rated voltage.

Mounting bracket

noneWith bracket

See table for separate order of mounting bracket.

rated voltage – electrical connection

rated voltage Class h

Voltage symbol Voltage

With surge voltage suppressor

With lED and surge voltage suppressor

not available for DC.

Part number for mounting bracket

Part number Fits


4

151■

VXK21 VXK22 VXK232 mm ✔ — —3 mm ✔ ✔ ✔

4.5 mm ✔ ✔ ✔6 mm — ✔ ✔8 mm — ✔ ✔

1/8, 1/4 1/4, 3/8 1/4, 3/8

VXK21 VXK22 VXK232 mm ✔ — —3 mm ✔ ✔ ✔

4.5 mm ✔ ✔ ✔6 mm — ✔ ✔

1/8, 1/4 1/4, 3/8 1/4, 3/8

100 mesh

0 MPa (0 bar)

Sub

ject

to

cha

nge



Stainless steel filter, 100 mesh

O-ring

Plug

normally closed (nC)Model

Ori

fice

Connection

normally open (nO)Model

Ori

fice

Connection

Other specifications

rated voltage AC: 48, 100, 110, 200, 220 or 240 VDC: 12 V

Seal material nBR, FKM, EPDM or PTFEelectrical connection DIn connector

VXK21, -22 & -23 – 2 port direct operated solenoid valve with built-in strainer

Medium Water, oil, steam and neutral mediaDegree of filtration

Max. working pressure See VX21, -22 & -23Min. working pressure

Operating temperature See VX21, -22 & -23Voltage/power Standard: 24 VDC, 230 VAC

Cv factor See VX21, -22 & -23Enclosure IP65 with DIn connector

Manual override not standardLeD, surge voltage suppressor Optional

Compared to separate strainer, VXK gives:■ Easier installation ■ More compact montage ■ Fewer connections

Other specifications are the same as for VX21, -22 & -23 (see previous pages). Contact SMC for more information.

4

152 ■

100 mesh0.9 MPa (9 bar)0 MPa (0 bar)

IP65

1S-0493 24 VDC G1/4 0.61/0.53 4.5 mm1S-0500 230 VAC/50 Hz/60 Hz G1/4 0.61/0.53 4.5 mm

2 MPa (20 bar)0 MPa (0 bar)

a b64103 5.5 mm

Sub

ject

to

cha

nge



VXK with electronic timer and built-in strainer

Medium Air, inert gases, water and neutral mediaDegree of filtration


Medium temperature –10 to 60 °CAmbient temperature –10 to 60 °C

Material Valve body: brass; seals: nBR (nitrile)

rated voltage Standard: 24 VDC, or 230 VAC/50 Hz/60 Hz, other voltages on request

Flow factor (Cv/Kv) See tableEnclosure

LeD, surge voltage suppressor Options

■ Easily set pause and pulse times ■ Manual test function■ Timer with multi-voltage 24–240 V AC/DC ■ Turnable solenoid■ Pulse time (on) 0.5–10 s ■ Paus time (off) 30 s–45 min■ Converts a continuous input signal into a sequence of on/off periods■ Filter can be replaced or cleaned without disasembling the valve

Valve with timerPart number Voltage Connection Cv/Kv factor Orifice

A manual ball valve (see below) is preferrably mounted before the valve.

Special version: ■ Timer with other time intervals■ Valve with other seal material, other pressure range and other orifice size

Compared to

constant flow –

for example during

cleaning – you save

both air and

electricity

Medium Air, water and neutral mediaMax. working pressureMin. working pressureOperating temperature –18 to 80 °C

MaterialValve body: nickel plated brass; ball: chrome plated brass; handle: PA66; O-ring: nBR (nitrile)

Manual ball valve

Manual ball valve

Part numberConnection

OrificeG1/4 m. G1/4 f.

a

b

4

153■

1.5 MPa (15 bar)0.02 MPa (0.2 bar)

VXED VXDVXD2130 1.8 W 5.5 W

19 VAC 9 VACVXD2140/2150 1.5 W 4.5 W

VXD2260 2.3 W 7 W 43 VAC 19 VAC

VXED2130-02F-5D1 0.7 MPa G1/4 1.9/1.6 10 mm 0.45 kgVXED2130-03F-5D1 0.7 MPa G3/8 2.4/2.1 10 mm 0.45 kgVXED2130-04F-5D1 0.7 MPa G1/2 2.4/2.1 10 mm 0.53 kgVXED2140-03F-5D1 1 MPa G3/8 4.5/3.9 15 mm 0.7 kgVXED2140-04F-5D1 1 MPa G1/2 5.5/4.7 15 mm 0.7 kgVXED2150-06F-5D1 1 MPa G3/4 9.5/8.1 20 mm 1.18 kgVXED2260-10F-5D1 1 MPa G1 13/11.1 25 mm 1.68 kg

VXD2130-02F-jDR1 0.9 MPa G1/4 1.9/1.6 10 mm 0.45 kgVXD2130-03F-jDR1 0.9 MPa G3/8 2.4/2.1 10 mm 0.45 kgVXD2130-04F-jDR1 0.9 MPa G1/2 2.4/2.1 10 mm 0.53 kgVXD2140-03F-jDR1 1 MPa G3/8 4.5/3.9 15 mm 0.7 kgVXD2140-04F-jDR1 1 MPa G1/2 5.5/4.7 15 mm 0.7 kgVXD2150-06F-jDR1 1 MPa G3/4 9.5/8.1 20 mm 1.18 kgVXD2260-10F-jDR1 1 MPa G1 13/11.1 25 mm 1.68 kg

VXD2142-03F-5D1 0.7 MPa G3/8 4.5/3.9 15 mm 0.72 kgVXD2142-04F-5D1 0.7 MPa G1/2 5.5/4.7 15 mm 0.72 kgVXD2152-06F-5D1 0.7 MPa G3/4 9.5/8.1 20 mm 1.2 kgVXD2262-10F-5D1 0.7 MPa G1 13/11.1 25 mm 1.72 kg

VXD2142-03F-jDR1 0.7 MPa G3/8 4.5/3.9 15 mm 0.72 kgVXD2142-04F-jDR1 0.7 MPa G1/2 5.5/4.7 15 mm 0.72 kgVXD2152-06F-jDR1 0.7 MPa G3/4 9.5/8.1 20 mm 1.2 kgVXD2262-10F-jDR1 0.7 MPa G1 13/11.1 25 mm 1.72 kg

Sub

ject

to

cha

nge



VXD21 & -22 – pilot operated solenoid valve for water & other neutral media

Medium Clean water and neutral media1

Degree of filtration Suitable filter: 80–100 meshMax. static pressure

Min. differential pressure

Max. differential pressure VXD2130: 0.7 MPa (7 bar)Others:1.0 MPa (10 bar)

Medium temperature 1 to 60 °CAmbient temperature –10 to 60 °C

Voltage Standard: 24 VDC, or 230 VAC, other voltages on request


Enclosure IP65 (with DIn43650A connector)Manual override not available

LeD, surge voltage suppressor Options 1. Contact SMC for advice for other media than water, other pressures, voltages, temperatures or body materials.

Valve seriesPower consumption DC Power consumption AC

Onset holding

Valve24 VDC, normally closed, energy saving version

Part numberMax. diff. pressure Connection

Cv/Kv factor Orifice Weight

230 VAC, normally closed



24 VDC, normally open



230 VAC, normally open



Energy saving version, series VXED, is now standard for 24 VDC, nC. Contact SMC for more information.■ Power consumption reduced by 2⁄3 ■ Easy to order: VXD is replaced with VXED■ Reduced operating costs ■ Longer life ■ Reduced environmental impact ■ Meets RoHS requirements

4

154 ■

1.5 MPa (15 bar)0 MPa (0 bar)

VXEZ VXZVXZ22 2.3 W 7 W 9.5 VACVXZ23 3 W 10.5 W 12 VAC

VXEZ2230-02F-5D1 0.7 MPa G1/4 1.9/1.7 10 mm 0.58 kgVXEZ2230-03F-5D1 0.7 MPa G3/8 2.4/2.1 10 mm 0.58 kgVXEZ2240-04F-5D1 0.7 MPa G1/2 5.3/4.6 15 mm 0.79 kgVXEZ2350-06F-5D1 0.7 MPa G3/4 9.2/7.9 20 mm 1.33 kgVXEZ2360-10F-5D1 0.7 MPa G1 12/10.3 25 mm 1.51 kg

VXZ2230-02F-jDR1 1 MPa G1/4 1.9/1.7 10 mm 0.58 kgVXZ2230-03F-jDR1 1 MPa G3/8 2.4/2.1 10 mm 0.58 kgVXZ2240-04F-jDR1 1 MPa G1/2 5.3/4.6 15 mm 0.79 kgVXZ2350-06F-jDR1 1 MPa G3/4 9.2/7.9 20 mm 1.33 kgVXZ2360-10F-jDR1 1 MPa G1 12/10.3 25 mm 1.51 kg

VXZ2232-02F-5D1 0.6 MPa G1/4 1.9/1.7 10 mm 0.66 kgVXZ2232-03F-5D1 0.6 MPa G3/8 2.4/2.1 10 mm 0.66 kgVXZ2242-04F-5D1 0.6 MPa G1/2 5.3/4.6 15 mm 0.91 kgVXZ2352-06F-5D1 0.6 MPa G3/4 9.2/7.9 20 mm 1.43 kgVXZ2362-10F-5D1 0.6 MPa G1 12/10.3 25 mm 1.61 kg

VXZ2232-02F-jDR1 0.7 MPa G1/4 1.9/1.7 10 mm 0.66 kgVXZ2232-03F-jDR1 0.7 MPa G3/8 2.4/2.1 10 mm 0.66 kgVXZ2242-04F-jDR1 0.7 MPa G1/2 5.3/4.6 15 mm 0.91 kgVXZ2352-06F-jDR1 0.7 MPa G3/4 9.2/7.9 20 mm 1.43 kgVXZ2362-10F-jDR1 0.7 MPa G1 12/10.3 25 mm 1.61 kg

Sub

ject

to

cha

nge



VXZ22 & -23 – zero differential pressure solenoid valve with brass body

Medium Clean water and neutral media1


Min. differential pressureMax. differential pressure See table below


Voltage Standard: 24 VDC, or 230 VAC2, other voltages on request



LeD, surge voltage suppressor Optional 1. Contact SMC for advice for other media than water, other pressures, voltages, temperatures or body materials. 2. With inbyggd full-wave rectifier

Valve seriesPower consumption DC Power

consumption aC

Valve – brass valve body24 VDC, normally closed, energy saving version












Energy saving version, series VXEZ, is now standard for 24 VDC, nC. Contact SMC for more information.■ Power consumption reduced by 2⁄3 ■ Easy to order: VXZ is replaced with VXEZ■ Reduced operating costs ■ Longer life ■ Reduced environmental impact ■ Meets RoHS requirements

4

155■

1.5 MPa (15 bar)0 MPa (0 bar)

VXEZ VXZVXZ22 2.3 W 7 W 9.5 VACVXZ23 3 W 10.5 W 12 VAC

VXEZ2230H-02F-5D1 0.7 MPa G1/4 1.9/1.7 10 mm 0.58 kgVXEZ2230H-03F-5D1 0.7 MPa G3/8 2.4/2.1 10 mm 0.58 kgVXEZ2240H-04F-5D1 0.7 MPa G1/2 5.3/4.6 15 mm 0.79 kgVXEZ2350H-06F-5D1 0.7 MPa G3/4 9.2/7.9 20 mm 1.33 kgVXEZ2360H-10F-5D1 0.7 MPa G1 12/10.3 25 mm 1.51 kg

VXZ2230H-02F-jDR1 0.7 MPa G1/4 1.9/1.7 10 mm 0.58 kgVXZ2230H-03F-jDR1 0.7 MPa G3/8 2.4/2.1 10 mm 0.58 kgVXZ2240H-04F-jDR1 0.7 MPa G1/2 5.3/4.6 15 mm 0.79 kgVXZ2350H-06F-jDR1 0.7 MPa G3/4 9.2/7.9 20 mm 1.33 kgVXZ2360H-10F-jDR1 0.7 MPa G1 12/10.3 25 mm 1.51 kg

VXZ2232H-02F-5D1 0.6 MPa G1/4 1.9/1.7 10 mm 0.66 kgVXZ2232H-03F-5D1 0.6 MPa G3/8 2.4/2.1 10 mm 0.66 kgVXZ2242H-04F-5D1 0.6 MPa G1/2 5.3/4.6 15 mm 0.91 kgVXZ2352H-06F-5D1 0.6 MPa G3/4 9.2/7.9 20 mm 1.43 kgVXZ2362H-10F-5D1 0.6 MPa G1 12/10.3 25 mm 1.61 kg

VXZ2232H-02F-jDR1 0.7 MPa G1/4 1.9/1.7 10 mm 0.66 kgVXZ2232H-03F-jDR1 0.7 MPa G3/8 2.4/2.1 10 mm 0.66 kgVXZ2242H-04F-jDR1 0.7 MPa G1/2 5.3/4.6 15 mm 0.91 kgVXZ2352H-06F-jDR1 0.7 MPa G3/4 9.2/7.9 20 mm 1.43 kgVXZ2362H-10F-jDR1 0.7 MPa G1 12/10.3 25 mm 1.61 kg

Sub

ject

to

cha

nge



VXZ22 & -23 – zero differential pressure solenoid valve with stainless steel body

Medium Water, oil and neutral media1


Min. differential pressureMax. differential pressure See table below


Voltage Standard: 24 VDC, or 230 VAC2, other voltages on request



LeD, surge voltage suppressor Options 1. Contact SMC for advice for other media than water, other pressures, voltages, temperatures or body materials. 2. With inbyggd full-wave rectifier

Valve seriesPower consumption DC Power

consumption aC

Valve – stainless steel valve body, seals and diaphragm of FKM24 VDC, normally closed, energy saving version












Energy saving version, series VXEZ, is now standard for 24 VDC, nC. Contact SMC for more information.■ Power consumption reduced by 2⁄3 ■ Easy to order: VXZ is replaced with VXEZ■ Reduced operating costs ■ Longer life ■ Reduced environmental impact ■ Meets RoHS requirements

4

156 ■

3 MPa (30 bar)0 MPa (0 bar)1 MPa (10 bar)

VXS22: 18 VAC; VXS23: 20 VAC

VXS2230S-02F-jGR1 G1/4 2.4/2 10 mm 0.49 kgVXS2230S-03F-jGR1 G3/8 2.8/2.4 10 mm 0.49 kgVXS2240S-04F-jGR1 G1/2 5.3/4.6 15 mm 0.66 kgVXS2350S-06F-jGR1 G3/4 9.2/7.9 20 mm 1.20 kgVXS2360S-10F-jGR1 G1 12/10.3 25 mm 1.34 kg

VXS2230Q-02F-jGR1 G1/4 2.4/2 10 mm 0.49 kgVXS2230Q-03F-jGR1 G3/8 2.8/2.4 10 mm 0.49 kgVXS2240Q-04F-jGR1 G1/2 5.3/4.6 15 mm 0.66 kgVXS2350Q-06F-jGR1 G3/4 9.2/7.9 20 mm 1.20 kgVXS2360Q-10F-jGR1 G1 12/10.3 25 mm 1.34 kg

Sub

ject

to

cha

nge



VXS22 & -23 – zero differential pressure solenoid valve for steam

Medium SteamMax. static pressure

Min. differential pressureMax. differential pressure

Medium temperature up to 183 °CAmbient temperature –10 to 60 °C

Voltage Standard: 230 VAC, other voltages on request

Power consumptionFlow factor (Cv/Kv) See table below

Enclosure IP65 (with molded cable)Manual override not available

Valve body material Brass or stainless steel

■ Robust design for safe operation and long life

Valve – brass valve body, piston construction of stainless steel and PPM, seals of FKM230 VAC, normally closed

Part number ConnectionCv/Kv factor Orifice Weight

Valve – stainless steel valve body, piston construction of stainless steel and PPM, seals of FKM230 VAC, normally closed

Part number ConnectionCv/Kv factor Orifice Weight

4

157■

VnB VnD

80–100 mesh1 MPa (10 bar) 0.87 MPa (8.7 bar)

0 MPa (0 bar)

0.3–0.7 MPa (3–7 bar)

EVnB104B-F8A 1 MPa 1/0.9 G1/4 0.3 kgEVnB204B-F10A 1 MPa 2.6/2.2 G3/8 0.6 kgEVnB201B-F15A 0.5 MPa 4.8/4.1 G1/2 0.6 kgEVnB304B-F20A 1 MPa 5.4/4.6 G3/4 0.9 kgEVnB301B-F20A 0.5 MPa 7.4/6.3 G3/4 0.9 kgEVnB404B-F25A 1 MPa 7/6 G1 1.4 kgEVnB401B-F25A 0.5 MPa 12/10.2 G1 1.4 kgEVnB504B-F32A 1 MPa 11/9.4 G1 1/4 2.5 kgEVnB501B-F32A 0.5 MPa 18/15.4 G1 1/4 2.5 kgEVnB604B-F40A 1 MPa 19/16.2 G1 1/2 4.1 kgEVnB601B-F40A 0.5 MPa 28/23.9 G1 1/2 4.1 kgEVnB704B-F50A 1 MPa 29/24.8 G2 6.3 kgEVnB701B-F50A 0.5 MPa 43/36.7 G2 6.3 kg

EVnB104BS-F8A 1 MPa 1/0.9 G1/4 0.3 kgEVnB204BS-F10A 1 MPa 2.6/2.2 G3/8 0.6 kgEVnB201BS-F15A 0.5 MPa 4.8/4.1 G1/2 0.6 kgEVnB304BS-F20A 1 MPa 5.4/4.6 G3/4 0.9 kgEVnB301BS-F20A 0.5 MPa 7.4/6.3 G3/4 0.9 kgEVnB404BS-F25A 1 MPa 7/6 G1 1.4 kgEVnB401BS-F25A 0.5 MPa 12/10.2 G1 1.4 kgEVnB504BS-F32A 1 MPa 11/9.4 G1 1/4 2.5 kgEVnB501BS-F32A 0.5 MPa 18/15.4 G1 1/4 2.5 kgEVnB604BS-F40A 1 MPa 19/16.2 G1 1/2 4.1 kgEVnB601BS-F40A 0.5 MPa 28/23.9 G1 1/2 4.1 kgEVnB704BS-F50A 1 MPa 29/24.8 G2 6.3 kgEVnB701BS-F50A 0.5 MPa 43/36.7 G2 6.3 kg

EVnD104D-F10A 0.97 MPa 1/0.9 G3/8 0.3 kgEVnD200D-F15A 0.97 MPa 4.2/3.6 G1/2 0.6 kgEVnD300D-F20A 0.97 MPa 7.7/6.6 G3/4 0.9 kgEVnD400D-F25A 0.97 MPa 12.2/10.4 G1 1.4 kgEVnD500D-F32A 0.97 MPa 14/12 G1 1/4 2.3 kgEVnD600D-F40A 0.97 MPa 29.5/25.2 G1 1/2 3.6 kgEVnD700D-F50A 0.97 MPa 48/41 G2 5.7 kg

Sub

ject

to

cha

nge



VnB & VnD – 2/2 air operated valve for neutral media or steam

TypeMedium neutral media Steam

Degree of filtrationMax. working pressureMin. working pressure Vacuum

Operating temperature –5 to 99 °C –5 to 180 °CAmbient temperature –5 to 60 °C

Pilot pressure

Valve VnB – for neutral mediaBronze valve body (BC6) with FKM seals

Part numberMax. diff. pressure

Cv/Kv factor Connection Weight

Stainless steel valve body with FKM seals



Valve VnD – for steam



Conventional angle seat valve

SMC’s compact solution

4

158 ■

2.4 MPa (24 bar)

➊2 SGC2003 SGC3004 SGC400

➒

S

Z

➑D DO W

⓫

B1 B2

➓ D

➍05 0–0.5 MPa10 0–1 MPa16 0–1.6 MPa

⓭

lZ

➎Rc

G G (ISO1179)n nPTT nPTF

⓮

S

⓬

M

ABCD

➏10 3/8"

SGC20015 1/2"20 3/4" SGC30025 1" SGC400

➐

3 110 VAC [115 VAC] 50/60 Hz

4 220 VAC [230 VAC] 50/60 Hz

5 24 VDC6 12 VDC

➋12

➌A nBRB FKM

➊ ➋ ➌ ➍ ➎ ➏

➐ ➑ ➒ ➓

SGCSGCA

--

1010

22

AA

11

3 D0505

Z AA

--

--

-22

y

⓫ ⓬ ⓭ ⓮

0.5 MPa

SGC(A)22-0510 3/8" 15 mm 5.4 4.6 0.69 (0.74) 0.73 (0.78)SGC(A)22-0515 1/2" 15 mm 7.6 6.5 0.69 (0.74) 0.73 (0.78)SGC(A)32-0520 3/4" 20 mm 13.8 11.8 1.04 (1.11) 1.08 (1.15)SGC(A)42-0525 1" 25 mm 21.4 18.3 1.7 (1.77) 1.74 (1.81)

1 MPa


1.6 MPa


Sub

ject

to

cha

nge



SGC – 2/2 air operated valve for cutting fluidsMedium Cutting fluids

Degree of filtration use SMC’s industrial filters FG, FGF, Fn or equivalentProvtryck

Max. differential pressure (port 1 to 2) 0.5 MPa (5 bar), 1.0 MPa (10 bar) or 1.6 MPa (16 bar)Operating temperature –5 to +60 °C (no freezing)

Ambient temperature –5 to +50 °C (no freezing)

Pilot pressure 0.5 MPa-type: 0.25 MPa (2.5 bar) to 0.7 MPa (7 bar); 1.0 and 1.6 MPa-type: 0.3 MPa (3 bar) to 0.7 MPa (7 bar)

Voltage Valve with pilot valve fitted, standard: 24 VDC or 230 VAC. Other voltages on request.

Flow factor (Cv) See table

Enclosure Valve with pilot valve fitted: IP65 (with DIn43650B connector)

Part number:


Series

LeD/surge voltage suppressor

noneWith surge voltage suppressorWith LED and surge voltage suppressor

Electrical connectionWith DIn connector For DIN connector (connec-

tor ordered separately)With M12 connector1

1. Cable ordered separately.

Mounting bracket/mounting positionWithout mounting bracket Bracket to the left Bracket to the right

Manual overrideNon-lockable push type

Locking push and turn type

Pressure range

Cable length

0.5 meters3 meters5 meters

Thread type

no. of position sensors

2 pcs.1 pc.

Valve position sensor1

Without position sensors (without magnet)Without position sensors (with magnet)D-M9n, 3-wire (nPn)D-M9P, 3-wire (PnP)D-M9B, 2-wireD-F9BA, 2-wire

1. See end of chapter 6 for detailed information about sensors.

Port size

rated voltage

Valve type

normally closed (nC)normally open (nO)

Seal material

Pilot valve fitted

Air operated

With pilot valve fitted

Technical data

Pressure range Model

Port size

Orifice diameter

Kv factor

Cv factor

Weight in kg1

Air operated

Pilot valve fitted

1. Weight in paranthesis includes mounting bracket.

L

In

R L

In

R

Documents

Accessories for SV2000 – tie rod and cassette type Overview_H4_Deel... · =D ElIVEry EX-STOCK F Or MO r I nFO, ASK Th SMC EXPE TS: Ph +31(0)205318888 / @SMCP uMATICS.nl Accessories