Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Access TowersMEKA 48
ACCESS TOWERS
2 DACAME
INTRODUCTION
MEKA 48The MEKA 48 Access Towers are designed using components of the MEKA 48 Multidirectional Scaffolding system. Certified product “N” AENOR certificate No.: 34/000022.
They offer all the required safety guarantees (components certified according to European standards EN 12810-1/2 and EN 12811-1/2/3).
Key features:
• Tubular elements in hot-dip galvanized S235 steel.
• Structural aluminium or steel stairs..
• Simple design, with few elements that facilitate a fast and easy assembly.
• Can be moved by crane.
• No height limitations.
• Diversity of lengths (2 and 3m) and widths (1.3 and 2m).
• Possible different accesses (landings).
• Load capacities of 2 and 3 kN/m2.
• Compliant with current regulations.
MEKA 48
3DACAME
USAGE EXAMPLES AND COMPONENT IDENTIFICATION
MEKA 48 ACCESS STAIRS IN ZIGZAG
SCREW JACK BASE Ø 36 (500)
BASE COLLAR MEKA 48 (GA)
VERTICAL STANDARD MEKA 48 1000 (GA)
VERTICAL STANDARD MEKA 48 2000 (GA)
LEDGER MEKA 48 700 (GA)
LEDGER MEKA 48 1300 (GA)
LEDGER MEKA 48 2300 (GA)
LEDGER MEKA 48 3000 (GA)
DIAGONAL MEKA 48 2000x3000 (GA)
ACCESS STAIR 3000x2000x600 (AL)ACCESS STAIR 3000x2000x600 (GA)
OUTER GUARDRAIL 3x2 MEKA 48 (GA)
INNER/OUTER HANDRAIL 3x2 MEKA 48 (GA)
SPIGOT WITH CLAMP MEKA 48 (GA)
TIE BAR 500 (GA)
FIXED CLAMP Ø48
1
2
6
3
7
4
8
5
9
10
11
12
15
13
14 12
6
37
4
8
5
9 10
11
12
15
13
14
MEKA 48 ACCESS STAIRS IN PARALLEL (INTEGRATED IN FAÇADE SCAFFOLDING)
SCREW JACK BASE Ø 36
BASE COLLAR MEKA 48
VERTICAL STANDARD MEKA 48 2000 (GA)
VERTICAL STANDARD MEKA 48 3000 (GA)
LEDGER MEKA 48 700 (GA)
LEDGER MEKA 48 2000 (GA)
LEDGER MEKA 48 2300 (GA)
LEDGER MEKA 48 3000 (GA)
FIXED PLANK M48/D48 2000 C-4 (GA)
FIXED PLANK M48/D48 3000 C-4 (GA)
SIDE GUARDRAIL MEKA 48 700 (GA)
ASSEMBLY GUARDRAIL MEKA 48 2000 (GA)
OUTER GUARDRAIL 3x2 MEKA 48 (GA)
INNER/OUTER HANDRAIL 3x2 MEKA 48 (GA)
ACCESS STAIR 3000x2000x600 (AL)ACCESS STAIR 3000x2000x600 (GA)
TOEBOARD MEKA 48 700 (MD)
TOEBOARD MEKA 48 2000 (MD)
SPIGOT WITH CLAMP MEKA 48 (GA)
TIE BAR 500 (GA)
FIXED CLAMP Ø48
1
2
6
3
7
4
8
5
9
10
11
12
15
16
17
18
19
20
13
14
12
3
45
6
7
8
9
10
11
12
13
14
15
1617
18
19
20
ACCESS TOWERS
4 DACAME
SCREW JACK BASES
BASE COLLAR
COMPONENT WEIGHT (kg) MAX. REG. (cm) REFERENCE
BASE COLLAR MEKA 48 (GA) 1.5 30 219900010
Mounted on the adjusting nuts of the screw jack bases, by means of its rosette it allows the connection of the horizontal bars and to carry out the setting out of the scaffolding.
VERTICAL STANDARDS
COMPONENT WEIGHT (kg) HEIGHT (m) REFERENCE
VERTICAL STANDARD MEKA 48 500 (GA) 3 0.5 210100050
VERTICAL STANDARD MEKA 48 1000 (GA) 5.2 1 210100100
VERTICAL STANDARD MEKA 48 2000 (GA) 9.6 2 210100200
VERTICAL STANDARD MEKA 48 3000 (GA) 14.2 3 210100300
SNAP PIN 0.08 - 070300000
Manufactured with tubes of Ø48.3 x 3.2 mm thickness, comprising rosettes at intervals of 50 cm. Each rosette has 4 small openings for connecting braces and 4 big openings for connecting diagonal braces. They bear the load of the scaffolding. The upper end has a spigot for attaching Ø40 pipes. Every vertical standard has connection holes at its lower end and in the spigot, and therefore both components can be joined together with a snap pin.
Coupling spigot
Rosette
Lowerendhole
Snappin
Assembly
COMPONENT WEIGHT (kg) MAX. REG. (cm) REFERENCE
SCREW JACK BASE Ø36 (500) 2.8 35 025010108
SCREW JACK BASE Ø36 (750) 3.6 57 025020078
SCREW JACK BASE Ø36 (1000) 4 75 025020108
SCREW JACK BASE Ø36 (1000) 2 levers 3.86 100 025020118
They bear the load of the vertical standardsSquare support plate with a thick-ness of 5 mm and dimensions of 120 x 120 mm. Ø 36 mm threaded rod available in different lengths with a pitch of 4 threads per inch.With overlapping space in compli-ance with the current regulations.Cold galvanized.
The 1000 screw jack base with 2 levers is primarily used to stabilize structures, in combination with sta-bilizers.
COMPONENT DESCRIPTION
MEKA 48
5DACAME
LEDGERS
COMPONENT WEIGHT (kg) LENGTH (m) REFERENCE
LEDGER MEKA 48 400 (GA) 1.9 0.4 210200042
LEDGER MEKA 48 700 (GA) 3.5 0.7 210200072
LEDGER MEKA 48 1000 (GA) 4.5 1 210200102
LEDGER MEKA 48 1300 (GA) 5.6 1.3 210200132
LEDGER MEKA 48 1500 (GA) 6 1.5 210200152
LEDGER MEKA 48 2000 (GA) 8.3 2 210200202
LEDGER MEKA 48 2300 (GA) 9.4 2.3 210200232
LEDGER MEKA 48 2500 (GA) 10.4 2.5 210200252
LEDGER MEKA 48 3000 (GA) 11.4 3 210200302
Manufactured with Ø48 mm pipe, they have cramp-irons with cone-shaped wedges on both ends that can be inserted into the small rosette openings. They fulfil the duties of a guardrail (erected 0.5 m and 1 m above the planks) and also support the platforms and/or stairs
Cramp-iron
DIAGONALS
COMPONENT H (m) M (m) WEIGHT (kg) LENGTH (m) REFERENCE
DIAGONAL MEKA 48 1500x700 (GA) 1.5 0.7 7.4 1.63 210315072
DIAGONAL MEKA 48 1500x1000 (GA) 1.5 1 8.6 1.75 210315102
DIAGONAL MEKA 48 2000x1300 (GA) 1.5 1.3 10.5 2.34 210320132
DIAGONAL MEKA 48 2000x1500 (GA) 2 1.5 11.2 2.44 210320152
DIAGONAL MEKA 48 2000x2000 (GA) 2 2 11.6 2.75 210320202
DIAGONAL MEKA 48 2000x2500 (GA) 2 2.5 13.8 3.10 210320252
DIAGONAL MEKA 48 2000x3000 (GA) 2 3 15 3.50 210320302
L
M
H
Manufactured with Ø48.3 mm pipe, they have articulated wedges on both ends. They stiffen the vertical standards and the ledgers that make up the vertical structure.
ACCESS TOWERS
6 DACAME
SPIGOT WITH CLAMP
COMPONENT WEIGHT (kg) LENGTH (m) REFERENCE
SPIGOT WITH CLAMP MEKA 48 (GA) 1.5 0.1 219900020
Allows vertical posts to be assembly on ledgers, reinforced beams or trusses, through the use of a flange that can be attached to a Ø48 mm pipe. The spigot contains holes so a snap pin can be attached when necessary.
FIXED METAL PLANKS
An extremely resistant perforated working area manufactured with anti-slip grooves. They have 2 internal handles for easy handling. Width: 30 cm. Complies with the requirements of the 12810-2 fall arrest system.
COMPONENT H (cm) C (kg/m2) WEIGHT (kg) LENGTH (m) REFERENCE
FIXED PLANK M48/D48 700 C6 H7 (GA) 7 600 4.7 0.7 210500070
FIXED PLANK M48/D48 1000 C6 H7 (GA) 7 600 6.1 1 210500100
FIXED PLANK M48/D48 1500 C6 H7 (GA) 7 450 8.5 1.5 210500150
FIXED PLANK M48/D48 2000 C6 H7 (GA) 7 300 11 2 210530200
FIXED PLANK M48/D48 2500 C4 H7 (GA) 7 300 13 2.5 210530250
FIXED PLANK M48/D48 3000 C4 H7 (GA) 7 300 16 3 210530300H: edge heightC: load capacity
30 cm
H
L
STABILISERS
They reduce the tipping tendency in slender structures, combined with screw jack bases or wheels.
COMPONENT WEIGHT (kg) LENGTH (m) REFERENCE
STABILIZER MEKA 48 400 (GA) 4.3 0.4 211300030
STABILIZER MEKA 48 700 (GA) 6.6 0.7 211300070
STABILIZER MEKA 48 1000 (GA) 9.4 1 211300100
Secured using screws and bolts.
MEKA 48
7DACAME
TELESCOPIC STABILIZER
It allows the stabilization of structures of considerable height. Equipped with an articulated base plate for optimum support on the ground. Adjustable telescopic arm can be operated with a snap pin. 2 flanges secure it to the scaffold's vertical braces for 48 mm pipe
COMPONENT WEIGHT (kg) LENGTH (m) REFERENCE
TELESCOPIC STABILIZER 6000 (GA) 22 from 4.3 to 6.1 251200500
1 2 3
4
1
2
3 4
ACCESS STAIRS
OUTER GUARDRAIL
COMPONENT WEIGHT (kg) L x H (m) REFERENCE
OUTER GUARDRAIL 2x2 MEKA 48 (GA) 5.5 2 x 2 211420200
OUTER GUARDRAIL 3x2 MEKA 48 (GA) 6.8 3 x 2 211420300
COMPONENT C (kg/m2) WEIGHT (kg) L x H (m) REFERENCE
ACCESS STAIR H:2x2 m x 60 cm (AL) 200 20 2 x 2 240920200
ACCESS STAIR H:2x3 m x 60 cm (AL) 200 24.5 3 x 2 240920300
ACCESS STAIR H:2x3 m x 90 cm (AL) 200 32.1 3 x 2 240920308
ACCESS STAIR H:2x2 m x 60 cm (GA) 300 46 3 x 2 212420300
Anti-slip steps and landings. Step width 60 and 90cm. The models manufactured with 6061 aluminium are very lightweight, mak-ing assembly easier, while the hot galvanized steel model is ideal for ac-cess points that need a greater loading capacity.
Manufactured with Ø40 mm pipe, it is mounted onto the vertical standard rosettes with cramp-irons similar to those found on the ledgers. For external sides of the staircase
1
2
1 2
L
L
H
H
60/90 cm
ACCESS TOWERS
8 DACAME
TIES
Allows the scaffolding to be braced to the façade. It should be used with an EN 74 Ø48 pipe-flange. Hook diameter: 18 mm.
COMPONENT WEIGHT (kg) LENGTH (m) REFERENCE
TIE BAR 500 (GA) 1.5 0.5 025029089
TIE BAR 1000 (GA) 2.4 1.0 025029099
TIE BAR 1500 (GA) 3.4 1.5 025029109
PROVISIONAL GUARDRAIL (two struts and two telescopic bars)
Provides security whilst the different levels of the scaffold are being erected. Zinc coating.Secured to the vertical pipe with a double wedge. The guardrails are telescopic and take up different positions along the breath of the structure.
COMPONENT WEIGHT (kg) LENGTH (m) REFERENCE
PROVISIONAL TELESCOPIC GUARDRAIL M48 (ZN) 16 1 to 3 210900000/10
Example of a provisional guardrail in use. In step 1 the fitter secures the perime-ter of the plank level with the provisional assembly rail. In step 2 the horizontal braces are in-stalled and the provisional guardrails are taken down.
1 2
INNER/OUTER HANDRAIL
COMPONENT WEIGHT (kg) L x H (m) REFERENCE
INNER/OUTER HANDRAIL 2x2 M48/D48 (GA) 6 2 x 2 211520200
INNER/OUTER HANDRAIL 3x2 M48/D48 (GA) 7.5 3 x 2 211520300
Manufactured with Ø32 mm pipe, it is mounted onto the access ladder struts using the two inverted U-shaped contours on both ends of the main pipe. For fastening the guardrail securely, the contours have connection holes. It opens up the step's landing as a passageway (internal sides of the stair-case).
1
2
1 2L
H
COMPONENT WEIGHT (kg) DIAMETER (mm) REFERENCE
FIXED CLAMP Ø48 (ZN) 1.3 48.3 025000052
SWIVEL CLAMP Ø48 (ZN) 1.4 48.3 025000051FIXED
SWIVEL
Tighten to tube with hexagonal nut and screw. 22 mm spanner.Cold galvanized surface coating.
CLAMPS (FIXED AND SWIVELLING)
MEKA 48
9DACAME
SCAFFOLD TIES
PLUGS
COMPONENT WEIGHT (kg) LENGTH (mm) REFERENCE
TIE SUPPORT A Ø12x120 (Øint 23) 0.18 120 025029148
TIE SUPPORT B Ø12x190 (Øint 23) 0.23 190 025029158
COMPONENT WEIGHT (kg) LENGTH (mm) REFERENCE
PLUG A Ø14x100 0.005 100 025029160
PLUG B Ø14x135 0.007 135 025029170
Threaded rings to be fitted to the plugs, made of galvanized steel. The tie bar is inserted in the ring with a 23 mm internal diameter, to complete the fastening to the façade.
Screw anchors available in two lengths and 14 mm diameter. Fitted according to the chosen support and number of scaffold ties.Made of nylon.
A
B
A B
Ø14
Ø12Ø23
L
SCREW JACK HOLDER
These enable the wheels or jack bases of towers to be held so that lifting operations (e.g. cranes) can be performed in complete safety.They are fitted to the vertical pipe of the scaffold frame with a clamp and have two round commercial handles for holding the lever of the wheel screw jack.Cold galvanized surface coating.
COMPONENT WEIGHT (kg) Ø CLAMPmm REFERENCE
SCREW JACK HOLDER (ZN) 1.1 48 219901008
VERTICAL CONNECTORS (MEKA 48)
These enable the vertical standards to be connected, in order to move scaffolds with a crane or to assemble hanging scaffolds, as an alternative to the horizontal cradle head, being fast and safe to assemble. Made from square hot-dip galvanized pipe.Meka 48 vertical connector: adjacent vertical pipes.Meka 48 vertical connector with screw jack: enables the screw jack to be attached to the scaffold structure
COMPONENT WEIGHT (kg) LENGTH (m) REFERENCE
VERTICAL CONNECTOR M48 (500) (GA) 2.6 0.50 219906050
VERTICAL CONNECTOR M48 SCREW JACK (GA) 2.2 0.62 219906000
L L
SCREW JACK
CRANE CLAMP
Lifting accessory designed to lift all types of round tube scaffolding structures of 48mm diameter.Base plate consisting of handrail section 50x10mm and length 200mm. Coupling to tubes of diameter 48 mm by means of 2 clamps EN 74-1, with tightening by means of hexagonal nut and screw. 22 mm spanner Oval ring from 14mm diameter commercial, with internal dimensions 140mm long x 46 mm wide Maximum working loads (MWL):- Assembled on horizontal tube: 600 kg- Assembled on vertical tube: 1000 kg
COMPONENT WEIGHT (kg) Ø CLAMPS(mm) REFERENCE
CRANE CLAMP Ø 48 (ZN) 2.6 48 025000066
ACCESS TOWERS
10 DACAME
ACCESS TOWERS - BASE 2m (LENGTH) x 1,3m (WIDTH)
H (m) 3 5 7 9 11 13 15 17 19 21 23 25
TOTAL Height (m)mín 3,3 5,3 7,3 9,3 11,3 13,3 15,3 17,3 19,3 21,3 23,3 25,3
máx 3,65 5,65 7,65 9,65 11,65 13,65 15,65 17,65 19,65 21,65 23,65 25,65
LANDING Height (m)mín 2,15 4,15 6,15 8,15 10,15 12,15 14,15 16,15 18,15 20,15 22,15 24,15
máx 2,5 4,5 6,5 8,5 10,5 12,5 14,5 16,5 18,5 20,5 22,5 24,5
COMPONENT REFERENCE QUANTITY
SCREW JACK BASE Ø 36 (500) (ZN) 025010108 4 4 4 4 4 4 4 4 4 4 4 4
BASE COLLAR MEKA 48 (GA) 219900010 4 4 4 4 4 4 4 4 4 4 4 4
VERTICAL STANDARD MEKA 48 1000 (GA) 210100100 3 6 6 6 6 6 6 6 6 6 6 6
VERTICAL STANDARD MEKA 48 2000 (GA) 210100200 - 2 6 10 14 18 22 26 30 34 38 42
VERTICAL STANDARD MEKA 48 3000 (GA) 210100300 2 4 4 4 4 4 4 4 4 4 4 4
LEDGER MEKA 48 700 (GA) 210200072 7 6 6 6 6 6 6 6 6 6 6 6
LEDGER MEKA 48 1300 (GA) 210200132 - 10 14 18 22 26 30 34 38 42 46 50
LEDGER MEKA 48 2000 (GA) 210200202 2 7 8 9 10 11 12 13 14 15 16 17
DIAGONAL MEKA 48 2000x2000 (GA) 210320202 - 2 3 4 5 6 7 8 9 10 11 12
SPIGOT WITH CLAMP MEKA 48 (GA) 219900020 1 4 4 4 4 4 4 4 4 4 4 4
ACCESS STAIR H:2x2 m x 60 cm (AL) 240920200 1 2 3 4 5 6 7 8 9 10 11 12
OUTER GUARDRAIL 2x2 MEKA 48 (2u) (GA) 211420200 1 1 2 3 4 5 6 7 8 9 10 11
INNER/OUTER HANDRAIL 2x2 M48/D48 (GA) 211520200 1 3 4 5 6 7 8 9 10 11 12 13
TIE BAR 500 (GA) 025029089 1 2 4 4 6 6 8 8 10 10 12 12
FIXED CLAMP Ø 48 (ZN) 025000052 1 2 4 4 6 6 8 8 10 10 12 12
TIE SUPPORT A 12x120 (Øint 23) (ZN) 025029148 1 2 4 4 6 6 8 8 10 10 12 12
PLUG A 14x100 025029170 1 2 4 4 6 6 8 8 10 10 12 12
MAIN FEATURES
BASE PLAN DIMENSIONS 2 m x 1,3 m (long x wide)
STEP WIDTH 0,6 m
LOAD CAPACITY 2kN/m2 (Class 3) Aluminium staircase
LANDING Side landing
2m
1,3m
CONFIGURATION TYPE 2x1,3m
H totalh
landingh
MEKA 48
11DACAME
ACCESS TOWERS - BASE 3m (LENGTH) x 1,3m (WIDTH)
H (m) 3 5 7 9 11 13 15 17 19 21 23 25
TOTAL Height (m)mín 3,3 5,3 7,3 9,3 11,3 13,3 15,3 17,3 19,3 21,3 23,3 25,3
máx 3,65 5,65 7,65 9,65 11,65 13,65 15,65 17,65 19,65 21,65 23,65 25,65
LANDING Height (m)mín 2,15 4,15 6,15 8,15 10,15 12,15 14,15 16,15 18,15 20,15 22,15 24,15
máx 2,5 4,5 6,5 8,5 10,5 12,5 14,5 16,5 18,5 20,5 22,5 24,5
COMPONENT REFERENCE QUANTITY
SCREW JACK BASE Ø 36 (500) (ZN) 025010108 4 4 4 4 4 4 4 4 4 4 4 4
BASE COLLAR MEKA 48 (GA) 219900010 4 4 4 4 4 4 4 4 4 4 4 4
VERTICAL STANDARD MEKA 48 1000 (GA) 210100100 3 6 6 6 6 6 6 6 6 6 6 6
VERTICAL STANDARD MEKA 48 2000 (GA) 210100200 - 2 6 10 14 18 22 26 30 34 38 42
VERTICAL STANDARD MEKA 48 3000 (GA) 210100300 2 4 4 4 4 4 4 4 4 4 4 4
LEDGER MEKA 48 700 (GA) 210200072 7 6 6 6 6 6 6 6 6 6 6 6
LEDGER MEKA 48 1300 (GA) 210200132 - 8 12 16 20 24 28 32 36 40 44 48
LEDGER MEKA 48 2300 (GA) 210200232 - 2 2 2 2 2 2 2 2 2 2 2
LEDGER MEKA 48 3000 (GA) 210200302 2 7 8 9 10 11 12 13 14 15 16 17
DIAGONAL MEKA 48 2000x3000 (GA) 210320302 - 2 3 4 5 6 7 8 9 10 11 12
SPIGOT WITH CLAMP MEKA 48 (GA) 219900020 1 4 4 4 4 4 4 4 4 4 4 4
ACCESS STAIR H:3x2 m x 60 cm (AL) 240920300 1 2 3 4 5 6 7 8 9 10 11 12
OUTER GUARDRAIL 3x2 MEKA 48 (GA) (2u) 211420300 1 1 2 3 4 5 6 7 8 9 10 11
INNER/OUTER HANDRAIL 3x2 M48/D48 (GA) 211520300 1 3 4 5 6 7 8 9 10 11 12 13
TIE BAR 500 (GA) 025029089 1 2 4 4 6 6 8 8 10 10 12 12
FIXED CLAMP Ø 48 (ZN) 025000052 1 2 4 4 6 6 8 8 10 10 12 12
TIE SUPPORT A 12x120 (Øint 23) (ZN) 025029148 1 2 4 4 6 6 8 8 10 10 12 12
PLUG A 14x100 025029170 1 2 4 4 6 6 8 8 10 10 12 12
MAIN FEATURES
BASE PLAN DIMENSIONS 3 m x 1,3 m (long x wide)
STEP WIDTH 0,6 m
LOAD CAPACITY 2kN/m2 (Class 3) Aluminium staircase3kN/m2 (Class 4) Steel staircase
LANDING Side landing
1,3m
3m
CONFIGURATION TYPE 3x1,3m
H totalh
landingh
ACCESS TOWERS
12 DACAME
ACCESS TOWERS - BASE 3m (LENGHT) x 2m (WIDTH)
H (m) 3 5 7 9 11 13 15 17 19 21 23 25
TOTAL Height (m)mín 3,3 5,3 7,3 9,3 11,3 13,3 15,3 17,3 19,3 21,3 23,3 25,3
máx 3,65 5,65 7,65 9,65 11,65 13,65 15,65 17,65 19,65 21,65 23,65 25,65
LANDING Height (m)mín 2,15 4,15 6,15 8,15 10,15 12,15 14,15 16,15 18,15 20,15 22,15 24,15
máx 2,5 4,5 6,5 8,5 10,5 12,5 14,5 16,5 18,5 20,5 22,5 24,5
COMPONENT REFERENCE QUANTITY
SCREW JACK BASE Ø 36 (500) (ZN) 025010108 4 4 4 4 4 4 4 4 4 4 4 4
BASE COLLAR MEKA 48 (GA) 219900010 4 4 4 4 4 4 4 4 4 4 4 4
VERTICAL STANDARD MEKA 48 1000 (GA) 210100100 3 6 6 6 6 6 6 6 6 6 6 6
VERTICAL STANDARD MEKA 48 2000 (GA) 210100200 - 2 6 10 14 18 22 26 30 34 38 42
VERTICAL STANDARD MEKA 48 3000 (GA) 210100300 2 4 4 4 4 4 4 4 4 4 4 4
LEDGER MEKA 48 700 (GA) 210200072 2 2 2 2 2 2 2 2 2 2 2 2
LEDGER MEKA 48 1000 (GA) 210200132 5 4 4 4 4 4 4 4 4 4 4 4
LEDGER MEKA 48 2000 (GA) 210200202 - 8 12 16 20 24 28 32 36 40 44 48
LEDGER MEKA 48 2300 (GA) 210200232 - 2 2 2 2 2 2 2 2 2 2 2
LEDGER MEKA 48 3000 (GA) 210200302 2 7 8 9 10 11 12 13 14 15 16 17
DIAGONAL MEKA 48 2000x3000 (GA) 210320302 - 2 3 4 5 6 7 8 9 10 11 12
SPIGOT WITH CLAMP MEKA 48 (GA) 219900020 1 4 4 4 4 4 4 4 4 4 4 4
ACCESS STAIR H:3x2 m x 90 cm (AL) 240920308 1 2 3 4 5 6 7 8 9 10 11 12
OUTER GUARDRAIL 3x2 MEKA 48 (GA) (2u) 211420300 1 1 2 3 4 5 6 7 8 9 10 11
INNER/OUTER HANDRAIL 3x2 M48/D48 (GA) 211520300 1 3 4 5 6 7 8 9 10 11 12 13
TIE BAR 500 (GA) 025029089 1 2 4 4 6 6 8 8 10 10 12 12
FIXED CLAMP Ø 48 (ZN) 025000052 1 2 4 4 6 6 8 8 10 10 12 12
TIE SUPPORT A 12x120 (Øint 23) (ZN) 025029148 1 2 4 4 6 6 8 8 10 10 12 12
PLUG A 14x100 025029170 1 2 4 4 6 6 8 8 10 10 12 12
CONFIGURATION TYPE 3x2m
MAIN FEATURES
BASE PLAN DIMENSIONS 3 m x 2m (long x wide)
STEP WIDTH 0,9 m
LOAD CAPACITY 2kN/m2 (Class 3) Aluminium staircase
LANDING Side landing
2m
3m
H totalh
landingh
MEKA 48
13DACAME
LANDING TYPES
ACCESS TOWERS LIFTINGThe access towers can be raised to ease their transport once assembled taking into account the following aspects:
SIDE SIDE + WALKWAY
FRONT FRONT + WALKWAY
FIXING OPTIONS - DETAILS
321
M12x60 screw + Nut1 2 Snap pin 3 Vertical
connector
4
5 4 Fixing point of the crane clamp. The angle of the cable with the vertical must be less than 45°.
5 Assembly of the vertical screw jack connector.
ACCESS TOWERS
14 DACAME
MEKA 48
15DACAME
DACAME, S.L.
Ctra. Santa Bárbara - La Sénia, km 4,6
43515 - La Galera
Tarragona - SPAIN
Phone: + 34 977 71 70 04
Fax: + 34 977 71 93 89
www.dacame.com
Aluminium rolling tower ALU 50
Rolling tower SYS-FAST
Rolling tower MEKA 48
Multipurpose tower
Shoring tower D
Stages, ramps & grandstands.
Accessories
Modular scaffold MEKA 48
Sectional scaffold SECUS
Ladder frame scaffold
European frame scaffold DINO 48
European frame scaffold FREE 48
Façade scaffold DUO 45
Access towers
Product manufacturer: DACAME S.L. Product design: DACAME S.L. Graphic design: DACAME S.L. Production: DACAME, S.L.The content of this catalogue is fully protected by copyright and the total or partial reproduction of images, texts, illustrations and graphics
without the express consent of DACAME S.L. is strictly prohibited.Legal Deposit T 1268-2015
V.02-2005