Upload
dangphuc
View
218
Download
1
Embed Size (px)
Citation preview
A Report
on
Semester Activities
Of
SAE INDIA COLLIGIATE CLUB 2017-18
Faculty advisor: Dr. R. S. PAWADE
Department of Mechanical Engineering
Department of Mechanical Engineering,
Dr. Babasaheb Ambedkar Technological University,
Lonere - 402 103, Dist- Raigad, Maharashtra
2017-2018
SAEINDIA COLLIGIATE CLUB
LIST OF OFFICE BEARERS
Year: 2017-2018
Sr. No. Position Name Name
1. Senior Faculty Advisor Dr. Raju S. Pawade
2. Additional Faculty Advisor Dr. Hemantkumar N. Warhatkar
3. Student Chairperson Mr. Shivam P. Yadav
4. Student Vice-Chairperson Mr. Utkarsh A. Palatkar
5. Student Secretary Mr. Isamoddin S.Shaikh
6. Student Treasurer Mr. Shantanu M. Patil
7. Student Reception Chair Mr. Adarshkumar B. Singh
8. Student Program Chair Miss. Parasmita P. Biswas
9. Student Publicity Chair Mr. Shubham B. Ukey
10. Student Membership Chair Mr. Vitthal B. Gadekar
DR. BABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY LONERE
DEPARTMENT OF MECHANICAL ENGINEERING
SAEINDIA COLLIGIATE CLUB 2017-2018
GUEST LECTURE
SAEINDIA Collegiate club of Dr. Babasaheb Ambedkar Technological
University arranged a guest talk on “Advanced Research and Education
opportunities” and “Research and Pedagogy” on 7th and 8th August 2017. The talk
was given by Prof. Shiv Gopal Kapoor, University of Illinois, USA and Prof.Suhas
Joshi, Head of Mechanical Department, IIT Bombay.Prof. Shiv Kapoor is the
director of many research laboratories which possess interdisciplinary research.
The event was held on 7th August, 2017 at Conference Hall from 3 p.m. to 5
p.m. The event started with felicitation of guests by Dr. P. K. Brahmankar. Then
both the guests delivered their talks on “Advance Research and Education
Opportunities”. The topic was aimed mainly for students. Almost 200 students
attended the program from all the branches.
On the next day, 8th August, 2017 the event started at 10 a.m. with the
lecture of Prof. Shiv Kapoor on “Research and Pedagogy” which was aimed
mainly for all Faculty members. The program ended with the publication of
SAEINDIA Collegiate Club DBATU magazine by the guests.
DR. BABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY LONERE
DEPARTMENT OF MECHANICAL ENGINEERING
SAEINDIA COLLIGIATE CLUB 2017-2018
QUIZ LEAGUE 1
SQL TEST is a quiz competition arranged by SAEINDIA collegiate club,
DBATU, Lonere. It consists of three rounds.
First Round- It is a multiple-choice question round which consist of
aptitude and technical questions related to automobiles. It was a 50 marks test
consist of 50 multiple choice questions.This round was conducted on 21st October
2017.Top 10 students were selected for next round. They were grouped into 5
pairs.
Second Round- It is a question-answering type interactive buzzer round to
test their knowledge of history and latest technology about automobiles,
manufacturers etc. This round was conducted on 28th October 2017. Three teams (6
students) were selected for next round.
Third Round- This round consists of disassembly and assembly of machine
components. We recorded the total time of disassembly and assembly of
component of each team and selected one winner team who completed the task in
least time. This round was conducted on 17th January 2018.
Winners for SAE Quiz League 2017-18 are
1. Shilu Sahu
2. Sandip Manjare
Coordinators for this event were
Final year:1. Shivam Yadav
2. Utkarsh Palatkar
3. Isamoddin Shaikh
4. Shubham Ukey
Third year: Shantanu Patil
Second year: VitthalGadekar
DR. BABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY LONERE
DEPARTMENT OF MECHANICAL ENGINEERING
SAEINDIA COLLIGIATE CLUB 2017-2018
CATIA WORKSHOP
SAE INDIA colligiate club held 1 day CATIA workshop on 17 February 2018.
There were total 26 participations from three classes of mechanical engineering
department i.e. First year, second year and third year. The workshop was
conducted in CAD/CAM lab of mechanical engineering department. The workshop
duration was from 9:00am to 6:00pm during which we covered following CATIA
modules.
1. Sketcher
2. Part design
3. Assembly design
4. Drafting
We provided hand on experience on CATIA software to the students. The event
was judged by faculty advisor Dr. R. S. Pawade.
Coordinators for this event were
Final year: 1. Shivam Yadav
2. Utkarsh Palatkar
3. Isamoddin Shaikh
4. Shubham Ukey
Third year: Shantanu Patil
Second year: Vitthal Gadekar
DR. BABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY LONERE
DEPARTMENT OF MECHANICAL ENGINEERING
SAEINDIA COLLIGIATE CLUB 2017-2018
TEAM TECHNOSPARK
Team Technospark, an off road racing team was conceived in 2015 by a
group of off-road enthusiasts in Dr. Babasaheb Ambedkar Technological
University. The team participates in BAJA competitions organized by the Society
of Automotive Engineers.
Team Technospark participated in ENDURO STUDENT INDIA- 2017 with
23 students from Mechanical and Electronics departments. Team had successfully
completed the design phase and manufacturing phase. While designing the vehicle,
we have taken BAJA 2017 Rulebook as a primary consideration. While designing
and analysis we achieved minimum factor of safety of 1.5 for maximum loading.
Driver safety and drive comfort are the main objectives while designing. Design is
validated by using CAE.
To obtain variable transmission ratio we are using CVTech AAB CVT with
our customized two stage reduction gearbox. To change the stiffness and ride
height of shocks we are using FOX air suspension. Use of customized disk and X-
split brake system increase our brake performance. Steering system is designed
with Ackerman geometry to get oversteer effect. We aim to manufacture our
vehicle with accuracy to obtain high performance.
Finally, the Teamhas secured a 25th Rank in the Endurance Event, which is
4 hours head to head race. Also we were 15thin the Acceleration event. We have
secured overall 28th All India Rank in Enduro Student India-2017 which was held
at Coimbatore.
Inspired and motivated by previous accomplishments and glories, the team
has set out to a build a car that would set a benchmark for designstandards in India.
The team is mainly concentrating on making the carfaster, lighter and durable. The
team’s main agenda for the next seasonis to be once again the national champions
in Indian BAJA competitions and with that team is participating in e-BAJA SAE
INDIA 2018, which is aiming to design and fabricate All-terrain vehicle which
runs on electric motor. With the first attempt, we could complete the virtual round
with 31st position out of 40 teams participating for e-BAJA event. Team has
appeared for both the BAJA SAE INDIA 2018 Virtual Round. Team has designed
the ATV for just 140 Kg kerb weight, with that we could acquire 131st position and
is eligible for Ropar, Punjab event.
CAD Model for ESI2017
M-BAJA E-BAJA
Name Deparment Name Department
AshutoshFirke Braking sandeshPatil braking
SaurabhGharat Braking MayuriJadhav Braking
RohanKhare Braking MILIND Ukey Braking
BHAVESH Nehte Braking PANKAJ Thakur braking
MakarandSamant Rollcage SurajChinchankar braking
OmkarAdhav Rollcage JAGDISH Kale electrical
Prasad Rode Rollcage OMKAR Phale electronics
Rutuja More Steering AKSHAY
Manthekar
Rollcage
VinayDharurkar Steering PayalDarekar Steering
HarshadaBavkar Steering VirajDahotre Steering
SiddharthBhopatrao Steering SAURABH Konje steering
KOMAL Mali steering NehaBhosale Steering
VirajGole Steering MadhuraniDharpur
e
Suspension
AkshayGaneshkar Suspension PrathameshGawade Suspension
SaurabhSalvi Suspension PankajJagtap Suspension
MAHESH Dumane
(Captain)
suspension NupoorMirgane Suspension
KaustubhSatwe Transmission SAURABH
Khandebharad
suspension
AyushBorle Transmission PALASH Bhure Transmision
RITURAJ Belhekar TRANSMISSIO SwarajDange Transmission
NishadGhode Transmission OmkarJadhav Transmission
Siddhi Bhosale Transmission ShubhamRahangad
e
Transmission
KaustubhJambhulkar Transmission BhushanChalke
(Captain)
Transmission
DR. BABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY LONERE
DEPARTMENT OF MECHANICAL ENGINEERING
SAEINDIA COLLIGIATE CLUB 2017-2018
ELECTRIC KART RACING CHAMPIONSHIP
eNKRC event was scheduled in duration of 28thsep to 2ndoct 2016 at
Mohite’s Racing Academy, Kolhapur. The team of 20 students registered to this
event from our university under guidance of Dr. R. S. Pawade. We had time of 2
months to design and manufacture the kart. The rulebook of the competition was
used as a reference while building the kart. The first stage of the competition was
virtual round where we presented and submitted our design reports online on the
eNKRC website.
The next step was implementing the design in manufacturing the kart. The
complete manufacturing process took about 15 days to complete. Then came the
testing phase.
In the competition, the first step was to clear technical inspection which we
passed. Then we went for acceleration and brake tests. Other static events in the
competition included business presentation, cost evaluation and design
presentation. We cleared all the static events successfully. The Kart Secured third
rank in the final Endurance race. The Kart also got the ‘Best Design Award’ of Rs.
20000.
LIST OF MEMBERS
Omkar Jadhav Mahesh Dumane
Megh Thakur Tejas Ganyarpawar
Madhurani Dharpure Meer Tadsarkar
Aniruddha Niturkar Vikas Kore
Dheeraj Shukla Rajat Nimje
Ashutosh Firake Nikhil Patil
Komal Mali Shantanu Patil
Makarand Samant Mandar Patil
Saurabh Aher Ajay Khale
Devkumar Nishad Prasad Rode
Lalit Desale Akshay Manthelkar
Kaustubh Jambhulkar Mayuresh Rathod
Bhushan Chalke