A highly absorbent polyurethane foam dressing Lyofoam Max is a highly absorbent dressing. It consists of a polyurethane foam and a waterproof backing film with high permeability to allow for an effective exudate management of moderate to highly exuding wounds. Hydrophilic polyurethane foam • High absorbency and fluid retention capacity • Works under compression • Soft, conformable and easy to apply and remove Polyurethane backing film • Moisture vapour permeable • Waterproof • Passed viral penetration test • Passed wet bacterial resistance test

A highly absorbent polyurethane foam dressing · appropriate bandage such as Tubifast , Tubigrip, System 4 or a fixation tape such as Mefix. Place the foam side directly onto the

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

Page 1: A highly absorbent polyurethane foam dressing · appropriate bandage such as Tubifast , Tubigrip, System 4 or a fixation tape such as Mefix. Place the foam side directly onto the

A highly absorbent polyurethane foam dressingLyofoam Max is a highly absorbent dressing. It consists of a polyurethane foam and a waterproof backing film with high permeability to allow for an effective exudate management of moderate to highly exuding wounds.

Hydrophilic polyurethane foam

• Highabsorbencyandfluidretentioncapacity

• Worksundercompression

• Soft,conformableandeasytoapplyandremove

Polyurethane backing film

• Moisturevapourpermeable

• Waterproof

• Passedviralpenetrationtest

• Passedwetbacterialresistancetest

Page 2: A highly absorbent polyurethane foam dressing · appropriate bandage such as Tubifast , Tubigrip, System 4 or a fixation tape such as Mefix. Place the foam side directly onto the

Mölnlycke Health Care AB Box 13080, SE-402 52 Göteborg, SwedenPhone + 46 31 722 30 00www.molnlycke.com

The Mölnlycke Health Care name and logo and Lyofoam® Max are registered trademarks of Mölnlycke Health Care AB.

Lyofoam Max is packaged sterile in single packs

Art. No Size Size Pcs/ Pcs/ cm inch shelf transp. cont. cont.

603200 7.5 x 8.5 3 x 3.4 10 120603201 10 x 10 4 x 4 10 60603203 10 x 20 4 x 8 10 60603204 15 x 15 6 x 6 10 70603205 15 x 20 6 x 8 10 60603206 20 x 20 6 x 8 10 80

How to use Lyofoam Max

Areas of useLyofoam Max is designed for the management of moderate to heavily exuding wounds such as leg ulcers and pressure sores. Through an excellent exudate management, Lyofoam Max creates a moist wound environment for optimal wound healing to take place.

0294

0110

8Key benefits of Lyofoam Max•Highabsorbencyandfluidretentioncapacity1

•Reducedriskofmaceration,lesspotentialforleakage and longer wear-time1

•Waterproofbackingfilmactsasabarriertobacteriaand virus penetration•Worksundercompression• Easytoapplyandremove• Softandconformableandprovidescomforttopatients•Non-sensitising•Widerangeofsizesavailablefordifferentwoundtypes

Clean the wound area and select a suitablesizeofLyofoamMax.

SecureLyofoamMaxwithanappropriate bandage such as Tubifast,Tubigrip,System4orafixation tape such as Mefix.

Place the foam side directly onto the wound surface, overlapping the wound margin by about 2cm.

Frequency of changeLyofoam Max may be left in place for several days depending on the nature and condition of the wound and the level of exudate.

References1.SMTLreports -ReportNo.11/3674/1 -ReportNo.11/3571/2 -ReportNo.11/3571/3 -ReportNo.11/3571/6 -ReportNo.11/3571/7