Applications

- Straight-wall rigid containers (plastic, metal, composite)

- Overcaps: injection molded �exible type

- 2” - 8” diameter containers

- 2” - 12” height containers

This is a side-belt overcapper designed to apply an overcap to a straight wall

rigid container. Containers are fed at random through the center of the

overcapper via a tabletop chain conveyor with a maximum cross-section of

6" x 6". As the container travels through the center of the overcapper the

leading edge or bead of the canister pulls the overcap from a chute and the

cap is progressively applied onto the container by a series of compression rollers.

DEL Packaging, Ltd

Overcapper | Model: SASRC

Sanitary Adjustable Spinng Rod Capper

Speci�cations

- Up to 600 containers per minute

- Shown with spinning rod cap feeder head

- Manual container diameter adjustment

- Sanitary wash-down construction

- 460 Volts /60 Hertz /Phase 3 NEMA 4X controls

Available Options

- Digital height and diameter adjust packages

- Automatic cap loading system

- Rotary cap feeder

- Stainless steel (non-wash down) construction

- Conveyors (table-top, air, etc.)

- Coupon / lea�et inserters

- Electrical and control system upgrade

- Timing-screw in-feed

- Spinning rod head storage cart with wench

- Ethernet and communication modules

- All domestic and international voltages to meet UL and CE requirements

- Cap-detection with reject (�ber optic sensors and/or vision technology)

Experience the DEL Di�erence

Contact DEL Packaging, Ltd

18113 Telge Road | Cypress, TX 77429Phone: 281.653.0099 | Fax: 281.653.0082http://www.delpackaging.com | sales@delpackaging.com Overcapper | Model: SASRC