Upload
others
View
1
Download
1
Embed Size (px)
Citation preview
the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015
90s 3D Glasses
the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015
90s 3D Glasses
the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015
Step 1:
Print the stencils and cover it up with either masking orclear tape
Step 2:
Doodle the rim of the glasses with any color you like.
Step 3:
Take out the lens from any 3D glasses you have.
Step 4:
Flip the rim of the glasses and place the lens on top
Step 5:
Doodle them together.
Step 6:
While it is hot, bend them slightly.
90s 3D Glasses
90s 3D Glasses
the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015
Step 7:
Doodle the temple of the glasses. (For a stronger temple,doodle them twice.)
Step 8:
Doodle up the end piece in both sides of the glasses.
Step 9:
To make a screw, cut a small piece of strand and stick it on the end piece.
Step 10:
Using your unblocking tool, doodle a hole. (Cover your unblocking tool with masking tape so that it is easier totake out.)
Step 11:
While it’s hot, roll them to make the tube tight.
Step 12:
Combine the tube with the temple.
90s 3D Glasses
the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015
Step 13:
Insert the temple in the small strand.
Step 14:
Doodle the bottom part of the end piece.
Step 15:
Adjust the hinge so that the temple is kept in place. Don’t forget to repeat Step 8-15 on the other side of the glasses!