8.8 Standard Productscparekhunbrako.com/PDF/DFL_Price_List.pdfToll Free: 1800 102 3911 2 NABL ISO/IEC 17025:2005 ISO 9001:2015 IATF 16949 Hex Head Bolts / Screws Metric 3 1. Specifications

1504814399

ISO9001

IATF16949

ISO14001

OHSAS18001

S DS DS DS D

DEEPAKFASTENERS LIMITED

8.8 Standard Products INR Price List No. DFL-09

Effective 1st July 2021

Disclaimer

Limited Warranty And Exclusive Remedy

All information contained in this pricelist has been prepared to assist users in their requirements for Fasteners. The information is based on International Fastener Standards. All such source material and information beyond the control of Deepak Fastener Limited (DFL) is subject to change.

Whilst every care has been taken to ensure that all information and technical data is accurate, DFL will not be liable to any customer that relies on any matter, fact or representation nor will it be liable for any subsequent damage or loss resulting from the use of any information contained in this pricelist. Customers are advised to make their own enquiries or seek independent advice regarding the fitness and suitability of the products listed.

Deepak Fasteners Limited has the right to change the price without any information, if there is a big change in the price of steel or zinc. No guarantee can be given for DFL (hex bolt & nut) products which are plated by users and/or outside plates, who may not have considered hydrogen embrittlement problem. The products listed in this pricelistmight not be stocked at DFL at all times and customers are advised to enquire the availability of the same. E. & O. E.

Deepak Fasteners Limited (DFL) warrants that these products conform to industry standards specified herein and will be free from defects in materials and workmanship. This warranty is expressly given in lieu of any and all other express or implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, and in lieu of any other obligation on our part of DFL will at its option, repair or replace free of charge (excluding all shipping and handling costs) any products which have not been subject to misuse, abuse, or modification and which in its sole determination were not manufactured in compliance with the warranty given above.

The remedy provided herein shall be the exclusive remedy for any breach of warranty or any claim arising in any way out of the manufacture, sale or use of these products. In no event shall Deepak Fasteners be liable for consequential, incidental or any other damages of any nature whatsoever except those specifically provided herein for any breach of warranty or any claim arising in any way of the manufacture, sale or use of these products. No other person is authorised by Deepak Fasteners to give any other warranty, written or oral, pertaining to the products.

Note

Surface Finish : All the products, unless otherwise ordered, are supplied in black thermal finish with a coat of rust preventive oil.

Packing : All products are supplied in standard packing as described in respective price tables. For sizes M6 (1/4) and above 3% extra packing charges will be applicable if the order quantity is less than one carton.

Plating No guarantee can be given for DFL products which are plated by users or by outside plates, : who may not have considered hydrogen embrittlement problem.

Pricing : GST extra as applicable.

2


Toll Free: 1800 102 3911

The company accepts no responsibility for orders booked by the company's salesman or representatives, till it is confirmed in writing by the company.

All offers for delivery from stocks are subject to goods remaining unsold at the time of receipt of order. For forward delivery, dates are given without any guarantee and no responsibility can be accepted by the company for delay in delivery or failure to deliver due to circumstances beyond the company's control.

When products are forged to customer's drawings and / or specifications , the responsibility to ensure that these do not result in infringement of any patent or trademark will lie entirely with customer concerned and the customer will be solely responsible for the consequence in case of any such infringement.

Wrong dispatches should be notified to the company within 15days from the date of receipt of goods and the Company's consent should be obtained in writing before return of such goods.

The company shall not be responsible for failure or delay in delivering the goods or any part thereof (or any consequential damages) due to acts of God, enemies of the Government of India, wars, revolution, embargo, riots, civil or political disturbances, strikes, lock-outs, stoppages of labour.

Delivery:

Infringement of patent and trade mark:

Order confirmation:

Acceptance and return:

Force Majeure:

Certifications:

3Toll Free: 1800 102 3911

NABL ISO/IEC 17025:2017ISO 9001:2015EN 15048-1:2007EN 14399-1:2015

MetricHex Head Bolts / Screws

4

1. Specifications Generally conforming to IS1364, ISO4014, 4017.ISO Metric 6g as per IS per IS4218.2. Threads

Property Class 8.8 as per IS1367.3. Material Mechanical Properties Prices for fully threaded screws beyond shaded sizes will cost 10% extra.4. Note

DFL 8.85. Marking No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating

who may not have considered hydrogen embrittlement problem.10% will be Charged Extra For Zinc Cr3+Plating

GST extra as applicable.7. Pricing

Part No. ` Price/100 Pcs

CartonQty

M4

616724616725616727616728616729624809613042613044613045613046794433794434794435794436

214214251251274298298334356400448492537582

40004000400040004000400030004000400030001200120016001600

616745616746616748616749616750624810613047613049613050613051613052613053794437794438794439794440794441

224224263263286311311350397464515563635687766820875

616767616768616770616771616772616773616774613054613055613056613057613058613059613060624811624812624813624814794442794443794444794445794446794447794448

16001600200016001600120012001200

8001200

800800800800600600600600500400400300300300200200200200200

M5 M6 M8

40004000400040004000400040003000300030002000160016001600160016001600

180195225240255271291354402451496540589632686738791844

1,0041,1141,6321,7661,9012,0412,169

400040004000300030003000300030001600160016001600160012001200120012001200

800800800600600400400

616815616817616818616819616820616821616823613070613071613072613073613074613075613076613077613078613079624815624816561206794449794450794451794452794453794454794455794456794457

371420441464487524586687766839915975

1,0521,1261,2021,2731,3481,5161,7302,4402,8713,0833,4413,6963,9294,1634,3964,6294,862

Length

Dia

10121618202225303540455055606570758090

100110120130140150160170180190200


CartonQty Part No. ` Price/

100 Pcs Carton

Qty Part No. ` Price/100 Pcs

CartonQty


Toll Free: 1800 102 3911

- All material is bulk packed - Minimum order quantity is one carton for each size.

Grey highlighted items are full threaded


Toll Free: 1800 102 3911


5


Property Class 8.8 as per IS1367.3. Material Mechanical Properties Sizes in brackets are non-preferred standard.4. Note

Prices for fully threaded screws beyond shaded sizes will cost 10% extra.DFL 8.85. Marking

No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating who may not have considered hydrogen embrittlement problem.10% will be Charged Extra For Zinc Cr3+Plating


M10

616844616845616846616847616848616850616851613080613081613082613083613084613085613086613087613088613089613090613091613092624817624818624819624820624821794458

794459

794460

M12 (M14) M16

754795802839895992

1,0841,3221,4361,5541,6541,7731,8902,0072,1242,2402,4742,4742,7082,7084,0884,2614,5814,9045,2286,095

6,788

7,483

1200800800800800800600600600400400400400400400400300300300300200200200200200200

120

120

616874

616876

616878616880616881616882613093613094613095613096613097613098613099613100613101613102613103613104613105613106624823624824624825624826624827624828624829624830624831624832624833624834794424

1,219

1,219

1,3421,4251,5611,6972,0262,1952,3652,5332,6562,8232,9893,1593,4903,4903,8163,8164,1194,7165,0755,4795,8406,2307,0097,0098,1508,1508,9669,780

10,98711,83212,615

600

600

600600400400400400300300300300300200200200200150150150150150150100100100100100

7560606060

616907616909616910616911616912613107613108613109613110613111613112613113613114613115613116613117613118613119613120613121624835624836624837624838

791593791595791597791599791601791603

2,0022,1872,3752,5662,7553,0993,3283,5553,7333,9674,1934,4214,7994,7995,2525,2525,9426,4536,8467,2787,7128,2269,6959,695

12,04013,12014,23615,35316,46917,586

400300200200200200200200200200150150150150150150150120120100100100100100

806050505050

616935616937616938616939616940616941613122613123613124613125613126613127613128613129613130613131613132613133613134613135613136613137624840624841624842624843624844624845624846624847624848

2,9982,9063,1563,4083,6703,8914,3454,6474,9505,2525,5555,8576,4616,4617,0267,0267,6328,2379,0509,681

10,30911,02512,29312,29314,15214,15215,47816,80218,12619,45220,775

200200200200200200200150150150150150150100100120

909060806060606060404040404040

Dia


CartonQtyLength Part No. ` Price/

100 Pcs Carton


CartonQty Part No. ` Price/

100 Pcs Carton

Qty



16 1820 2225 30 35 40 4550556065707580859095100110120130140150160170180190200220240260280300


Toll Free: 1800 102 3911


Property Class 8.8 as per IS1367.3. Material Mechanical Properties Sizes in brackets are non-preferred standard.4. Note

Prices for fully threaded screws beyond shaded sizes will cost 10% extra.DFL 8.85. Marking

No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating who may not have considered hydrogen embrittlement problem.10% will be Charged Extra For Zinc Cr3+Plating


(M18) M20 (M22)

616965616966616967616968624849613138613139613140613141613142613143613144613145613146613147613148613149613150613151613152613153624850624851794425794426

794427794428794429

4,5344,8365,1385,4796,1586,4616,8397,2167,5588,3128,3129,0709,0709,824

10,58011,64712,43513,22013,89716,38716,38718,12618,12619,69821,353

23,00824,66426,319

150150150150120100120

80120

80808080806060404060604040403030

303030

616995616996616997616998616999617000613154613155613156613157613158613159613160613161613162613163613164613165613166613167613168613169613170613171624854624855624856624857624858624859

5,8575,8576,2356,6507,0267,4068,2758,7279,1819,635

10,54410,54411,44811,44812,35713,26214,74715,66016,47317,33920,44220,44222,51422,51424,58126,65128,72128,72130,79032,858

150150100100100100

808080808080808060606040404040404040303030303030

617029617030617031617032613172613173613174613175613176613177613178613179613180613181613182613183613184613185613186613187613188613189624860

624861624862791643

8,2758,7669,2209,712

10,61711,18411,75112,88312,88313,98013,98015,36516,51617,28318,43719,82920,99623,32723,32726,17626,17630,62233,407

36,19338,97640,996

8080808060808080606060606060404040404020202020

202020

Dia


6



100 Pcs Carton


CartonQty

- All material is bulk packed- Minimum order quantity is one carton for each size.


3540 45 50 55 6065707580859095100110120130140150160170180190200220240250260280300


Toll Free: 1800 102 3911


Property Class 8.8 as per IS1367.3. Material Mechanical Properties Sizes in brackets are non-preferred standard. 4. Note

Prices for fully threaded screws beyond shaded sizes will cost 10% extra.* Long Delivery Items - Subject to extended deliveries (3 to 4 months) Users are advised to plan their requirements in advance.





7

50 55 60 65 70 75 80859095100110120130140150160170180190200220240250260280300

M24 (M27)* M30*

617060617061617062617063617064617065613190613191613192613193613194613195613196613197613198613199613200613201613202613203613204613205613206624868624869624870624871

11,04811,65412,25912,86413,46913,80015,54616,97416,97418,40218,40219,83021,21822,20923,59724,98626,37429,14929,14933,31333,31337,00339,76842,53242,53245,29748,061

608060606060606040404040403232282824202020202020161616

617088617089617090617091617092617093617094

617096

613209613210613211613212613213613214613215613216613217613218613219613220613221

613222624873624874

16,66617,56918,38919,22920,07020,91021,750

23,475

26,65728,73630,72431,82933,81835,80738,24041,77741,77745,53345,53349,95453,933

57,91162,33266,753

40404040404040

40

30303020202020202020201212

121212

617112617113617114617115617116617117617118

617120

613225613226613227613228613229613230613231613232613233613234613235613236613237

613238613239613240

21,92622,94324,00525,02126,08127,14328,159

30,282

33,90736,38338,90240,67043,10145,53347,96650,52353,04955,15357,91162,77567,636

72,50177,36482,225

40404030303030

30

30202020202016161616161010

1010

8

Dia



100 Pcs Carton


CartonQty




Toll Free: 1800 102 3911


Property Class 8.8 as per IS1367.3. Material Mechanical Properties Sizes in brackets are non-preferred standard. 4. Note

Prices for fully threaded screws beyond shaded sizes will cost 10% extra.* Long Delivery Items - Subject to extended deliveries (3 to 4 months) Users are advised to plan their requirements in advance.




75 80 90 100110120130140150160170180190200220240260280300

(M33)* M36* M42*

617141617142617144617146613242613243613244613245613246613247613248613249613250613251613252613253613254613255613256

3020202020201616161616121212

88888

617166617168617170613257613258613259613260613261613262613263613264613265613266613267613268613269613270613271

2018161612121212121212

8888888

617215617217617218617219613286613287613288613289613290613291613292613293613294613295613296613297613298

121212

88888888876444

Dia


8



100 Pcs Carton


CartonQty


M48

617263617264617265617266613312613313613314

613316

613318613319613320613321613322613323

123,639130,433131,200136,666152,668159,577166,534

180,398

186,954237,639253,474269,309285,144300,979

4444444

4

444444


CartonQty

34,26135,63138,28440,67045,09148,18650,83853,93357,02759,68065,42865,42871,17571,17577,36483,10989,29895,045

101,232

43,76446,86050,39654,81758,35461,44864,98368,52072,05779,13079,13086,20486,20493,277

100,349107,423114,495121,568

84,07488,90593,76394,48598,475

103,955109,424114,899121,464125,336132,552131,006168,042180,514193,025205,511217,989


1. Specifications Generally conforming to IS1364, ISO4032.ISO Metric 6H as per IS4218, ISO261, ISO965.2. Threads

Property Class 8 as per IS1367, ISO898 Part-II.3. Material and Mechanical Properties Sizes in brackets are non-preferred non-standard sizes.4. Note

M6 to M42 Marking will be DFL 8.5. Marking No guarantee can given for DFL products which are plated by users or by outside plates, 6. Plating



623196623197623198623200787925623201623202787926624890623203787927623204624891623205624892623206623207623208623209623210623211623212623214623216

80008000600040001600160012001200

600600600600400400300300200200100

8060402020

M4 x 0.70M5 x 0.80

M6 x 1M8 x 1.25

(M10) x 1.25M10 x 1.5

M12 x 1.75(M12) x 1.5(M14) x 1.5

M14 x 2(M16) x 1.5

M16 x 2(M18) x 1.5M18 x 2.5

(M20) x 1.5M20 x 2.5

(M22) x 2.5M24 x 3

(M27) x 3M30 x 3.5

(M33) x 3.5M36 x 4

M42 x 4.5M48 X5

Diameter Part No. CartonQty

MetricHex Nuts

9

` Price/100 Pcs


Toll Free: 1800 102 3911


4663

105210480457560588

1,048998

1,4171,3502,2852,1752,8502,7103,3124,6147,903

11,00914,92420,39133,74846,395

1. Specifications Generally conforming to IS2016No guarantee can given for DFL products which are plated by users or by outside plates, 2. Plating



Specialized Coatings

4mm5mm6mm8mm

10mm12mm14mm16mm18mm20mm22mm24mm27mm30mm33mm36mm42mm48mm

160008000800060004000300016001600160012001200

600400400300200100100

787853787854787855787856628850561034787857561035561051561030561033561036561031561032561037561038561040561042

Diameter Part No. ` Price/100 Pcs

CartonQty

MetricPlain Washer

10


The product's life and quality is measured not only by its grades and standards but

also by its finish, which prevents it from rusting and adds strength to the material.

Deepak Fasteners offers a wide range of generic and proprietary

coating to meet exacting customer requirements. In-house

capability includes Zinc / Zinc-Nickel Electroplating, Geomet,

Mechanical Galvanizing, Delta Dorken, Hot Dip Galvanizing,

PTFE, Unbrako Wiscoat.

Toll Free: 1800 102 3911


26335587

161288396503655767815

1,4381,8842,3863,3554,0968,149

17,040

Direct Tension Indicator

The UNBRAKO Arc Welding Stud also known as shear connector is used in the construction of tall

buildings, bridges and steel structures. The drawn-arc process produces a full cross-sectional weld

forming a bond that is greater than the surrounding material. It improves the strength of the structure.

Product Range : Metric: M13, M16, M19, M22, M25 – Any Length

Inch: 1/2”, 5/8”, 3/4", 7/8”, 1” – Any Length

UNBRAKO Direct Tension Indicator also known as Auto Torque Indicator, are single-use mechanical load cells designed to indicate the magnitude of

preload in the assembly. It shows if the bolt is properly tensioned, very useful while tensioning

High Strength Structural Bolts.

Product Range : Metric: M16 – M36 as per BS EN 14399-9 Unbrako Feeler Gauge is available to check if the required torque is achieved.

Tension Control Structural Bolt

Unbrako Electric

Shear Wrench

Product Range : Metric: M12 – M30 (any length) – As Per BS EN 14399 - 10

Unbrako Electric Shear Wrench is also Available.

Tension Control Structural Bolt is an easy to install Heavy Duty Bolt used in Steel Frame Construction.

It has its own built-in torque control device. The outer socket of wrench rotates the nut until the

torque control groove in the spline shears off, thereby achieving proper bolt tension.

Rebar CouplerUnbrako Rebar Coupler Systems, also known as

Reinforcing bar couplers or coupler splicing connection, is a threaded sleeve that guarantees an ultimate tensile

strength of the splice (joint) greater than that of the parent bar. Coupler splicing system is suitable for

joining reinforcement bars end to end.

Product Range : Metric: 13mm to 57mm Bar Diameter

As per ASTM A615, ASTM A706, ASTM A775, ACI 318, ACI 349,A.A.S.H.T.O and UBC 1997.

Prices available on request. Contact Unbrako for further detail.

Unbrako provides complete equipment for bar-end preparation on site.

Download the Free Unbrako Fastener App for iPhone & Android at : www.unbrako.com

Arc Welding Stud

THE WORLD LEADER

Construction Fasteners

www.deepakfasteners.com [email protected]

Deepak Fasteners Limited

In Fasteners Engineering You Name It, We Have It

DFL8.8

-P09-0

10721

Copyr

ight

© 2

018 D

eepak

Fast

eners

Lim

ited. A

ll R

ights

Rese

rved.

UNBRAKO EUROPEDeepak Fasteners Shannon Ltd.Bays 25-30 Shannon Industrial Estate, County Clare, IrelandTel: +353-61-716-500, Fax: +353-61-716-584

UNBRAKO INDIADeepak Fasteners India Ltd.4th Floor, First Mall, Mall RoadLudhiana- 141001 (Pb.) IndiaTel: +91-161-5131111, 7131111 Fax: +91-161-2774400

UNBRAKO UKDeepak Fasteners UK Ltd.12-14 Tower Street, New Town Birmingham - B19 3RR, U.K.Tel: +44-121-333-4610, Fax: +44-121-333-4525

UNBRAKO LLC USA11939 Woodruff AveDowney, CA 90241 - USAToll Free: +1-888-456-9181, Tel: +1-562-674-3550,Fax: +1-213-402-2547

Documents

8.8 Standard Productscparekhunbrako.com/PDF/DFL_Price_List.pdfToll Free: 1800 102 3911 2 NABL ISO/IEC 17025:2005 ISO 9001:2015 IATF 16949 Hex Head Bolts / Screws Metric 3 1. Specifications