85000-115 TECH M2 8 x 11 09182013 - SPD Sales Limited - Homespdsales.com/wp-content/uploads/2014/01/M-Series_Metering_Pumps.pdf · Display: Motor speed, Input signal values, Tube

Applications:

NEMA 4X

Patents: 4,496,295 7,001,153 and other patents pending

! Municipal Water Treatment

! Municipal Wastewater Treatment

! Chemical Metering

! Chlorination

! Chloramination

! Fluoridation

! Polymer Injection

! Acid Injection

! Alum Injection

! PAC Injection

! Caustic Injection

Features:

5 Year Warranty

FLEX-PRO M-2

Variable Speed DC Motor

200:1 Turndown ratio

Engineering and Technical Data

ProSeries-Ms Peristaltic Metering Pumps

NEMA 4X (IP 66) Washdown Duty

1 of 6

Tube Failure Detection System

Tube life hour counter

NSF Listed Std. 61

s

Sold and serviced exclusively by highly skilled, factory authorized technicians.

Feed Rates to 14.9 GPH (56.2 LPH)

Pressures to 125 PSI

4-20mA, Pulse Input and Manual Speed Control

! Peristaltic pump design does not have valves that can clog requiring maintenance.

! Self priming - even against maximum line pressure. By-pass valves are not required. Cannot vapor lock, or lose prime. Does not permit syphoning.

! Output rates to: 14.9 GPH (56.2 LPH) and pressures to 125 PSI (8.6 Bar).

! Variable speed DC motor.

! Specially engineered tubing for long life at high pressures. Meets FDA 21 CFR requirements for food contact applications.

! Patented Tube Failure Detection (TFD) system. Senses tube failure by detecting chemical in the pump head. No false triggering.

! 200:1 turndown ratio.

! Inputs: Optional

communications availble: Profibus DPV1, Modbus RTU, Modbus-TCP, EtherNet/IP, and Profinet RT I/O.

! Backlit LCD displays motor speed, input signal values, tube life timer, service and alarm status.

! Outputs: one 250V/6A relay to monitor TFD (Tube Failure System) and FVS (Flow Verification System), and 4-20mA analog signal scalable to the motor speed.

! Two CNC precision machined squeeze rollers and two alignment rollers for optimum squeeze, unparalleled accuracy, and tube life.

! Heavy duty rotor - single piece plastic rotor means no flexing and increased accuracy with no metal springs or hinges to corrode.

! Inject at maximum pressure in either direction (clockwise and counter clockwise).

! Compatible with Blue-White’s output Flow Verification Sensor (FVS) system. Sensor is sold separately.

4-20mA and pulse inputs for remote external speed control and either powered 6-24 VDC or non-powered dry contact closure for remote start/stop.

ProSeries-Mby Blue-White Ind.

s

Optional Modbus, Profibus, Industrial Ethernet

TDS #85000-115 rev. 09182013


2 of 6

s FLEX-PRO ProSeries-Ms Peristaltic Metering Pumps

Engineering Specifications:

Materials of Construction:Wetted components: Non-Wetted components:

Enclosure:413 Aluminum (Polyester powder coated)

Pump Head:q Valox (PBT) thermoplastic

Pump Head Cover:Clear Acrylic - Annealed for added strength and chemical resistance.Permanently lubricated sealed motor shaft support ball bearing.

Cover Screws:Stainless Steel

Roller Assembly:q Rotor: ..................................Valox (PBT)

Rollers: ...............................Nylon Roller Bearings: .................SS Ball Bearings Roller Shaft: ........................316 Stainless Steel

Motor Shaft:Chrome plated steel

TFD System Sensor pins:Hastelloy C-276

Power Cord:3 conductor, SJTW-A Water-resistant

Tube Installation Tool:Glass Filled Nylon

Mounting Brackets and Hardware:316 Stainless Steel

Pump Tube Assembly (Model Specific - 2 provided):q q q Tubing: . . . . . Norprene or Norprene Chemical or Tygothane

Adapter fittings: .PVDF

Recommended Ancillary Items Sold Separately:

Injection / Back-flow Check valve: Body & insert: . . . . . . PVDF Check Ball: . . . . . . . . Ceramic Spring: . . . . . . . . . . Hastelloy C-276 Ball Seat O-ring: . . . . . FKM (optional EP) Static Seal O-ring: . . . . FKM (optional EP)

q Duckbill anti-scale valve: Santoprene

For “S” tubing type connections only: Suction Tubing: . . . . . 3/8” OD x 1/4” ID x 10’ Clear PVC Discharge Tubing: . . . . 3/8” OD x 1/4” ID x 10’ Polyethylene (LLDPE) Suction Strainer: . . . . . Polypropylene

For “M” M/NPT connections only:Suction Strainer: Body: . . . . . . . . . . . . . . . . . PVDF Check Ball: . . . . . . . . . . . . Ceramic Ball Seat O-ring: . . . . . . . . FKM (optional EP)

For “C” Tri-clamp connections only:none

Motor:Brushed DC, 1/8 H.P.

Duty cycle:Continuous

Motor speed adjustment range 200:1:0.5% - 100% motor speed (0.7 to 130 RPM)

Motor speed adjustment resolution:0.1% increments

DisplayBacklit LCD, UV resistant.

KeypadEight button positive action tactile switch keypad.

Enclosure:NEMA 4X (IP66), Polyester powder coated aluminum. Maximum Overall Dimensions: 7-1/2” W x 10-1/4” H x 14” D (19 W x 26 H x 35.6 D cm)

Product weight:28.4lb. (12.9 Kg)

Approximate shipping wt:35 lb. (15.9 Kg)

Maximum working pressure (excluding pump tubes):125 psig (8.6 bar)Note: see individual pump tube assembly maximum pressure ratings.

Maximum Fluid temperature (excluding pump tubes):o o3/8” OD x 1/4” ID tubing connections: 130 F (54 C)

o oM/NPT connections: 185 F (85 C)Note: see individual pump tube assembly maximum temperature ratings.

Maximum fluid viscosity:12,000 Centipoise

Maximum suction lift:30 ft. of water at sea level (14.7 atm psi)

Ambient Operating TemperatureO O O O14 F to 115 F (-10 C to 46 C)

Ambient Storage TemperatureO O O O-40 F to 158 F (-40 C to 70 C)

Operating Voltage:115VAC/60Hz, 1ph (1.5 Amp Maximum)230VAC/60Hz, 1ph (0.7 Amp Maximum)220VAC/50Hz, 1ph (1.0 Amp Maximum)240VAC/50Hz, 1ph (1.0 Amp Maximum)

Power Cord Options:115V60Hz = NEMA 5/15 (USA)230V60Hz = NEMA 6/15 (USA)220V50Hz = CEE 7/VII (EU)240V50Hz = AS 3112 (Australia/New Zealand)

TDS #85000-115 rev. 09182013


3 of 6

Output Specifications:


®Tygothane M-2 Tube Pumps Meets FDA criteria for food | Resistant to oils, greases and fuels

GPH

.02 - 4.0

.05 - 9.3

LPH

.08 - 15.2

.17 - 35.2

ML/Min

1 - 2533 - 587

RPM

130130

115V AC

24-*GE24-*GG

M-2M-2

230V AC

25-*GE25-*GG

M-2M-2

220V AC

26-*GE26-*GG

M-2M-2

®Norprene Chemical M-2 Tube Pumps Meets FDA criteria for food | Superb chemical resistance

LPH

.28 - 56.2

230V AC

25-*M-2 TH

115V AC

24-*M-2 TH

GPH

.07 - 14.9

220V AC

26-*M-2 TH

ML/Min

5 - 937

RPM

130

®Norprene M-2 Tube Pumps Meets FDA criteria for food | Excellent chemical resistance | CIP | SIP

LPH

.26 - 52.2

.03 - 6.5.10 - 20.6

.26 - 52.2

230V AC

25-*ND

25-*NH

M-2M-225-*NFM-2

M-225-*NHL

115V AC

M-224-*ND

24-*NHM-224-*NFM-2

M-224-*NHL

GPH

.03 - 5.5.07 - 13.8

.01 - 1.7

.07 - 13.8

220V AC

26-*ND

26-*NH

M-2M-226-*NFM-2

M-226-*NHL

ML/Min

4 - 870

1 - 1082 - 344

4 - 870

Feed Rate

RPM

130130130130

MaxSpeed

M-2 Model Numbers

PSI (bar)

65 ( )65 ( )

4.54.5

MaxPressure

PSI (bar)

125 (8.6)125 (8.6)125 (8.6)65 (4.5)

PSI (bar)

50 (3.4)

MaxTemperature

F (C)

185 (85)185 (85)185 (85)185 (85)

F (C)

130 (54)

F (C)

130 (54)130 (54)

* Inlet/outlet connection typeS = 3/8” OD x 1/4” ID tubing compressions type connectionsM = ½” male NPT C-= 3/4” tri-clamp connections

! The Flex-Pro Pump’s motor speed is linear over the entire 0.5% to 100% adjustment range. ! Output versus pressure is nearly linear in all models. Larger tubes exhibit greater losses.! For optimum tube life, specify the pump to operate at the lowest possible RPM and pressure.

TDS #85000-115 rev. 09182013


4 of 6

Chemical Resistance of Tubing:

®Norprene TubingMeets FDA criteria for food | Excellent chemical resistance | CIP | SIP

®Tygothane TubingMeets FDA criteria for food | Resistant to oils, greases and fuels

®Norprene Chemical Tubing - Ultra smooth plasticizer-free bore (inner liner)

Meets FDA criteria for food | Superb chemical resistance

Alcohol generalAluminum Sulfate (Alum)Ammonium chlorideAmmonium hydroxide

Benzyl alcoholBleachBrine solutionsCalcium hypochlorite 20%

Ammonium Sulfate (LAS)

Ethylene glycolFerric chlorideFerric nitrateFerric sulfateFerrous chloride - 43% in waterFerrous sulfate

Formic acidGlucose

Fluosilicic Acid (up to 25%)

Hydrochloric acid 33%Hydrocyanic acidHydrogen peroxideHypochlorous acidIodineMagnesium chlorideMagnesium sulfatePhosphoric acidPlating solutions

Potassium hydroxidePotassium permanganatePropylene glycolSodium hydroxide 50%Sodium BisulfiteSodium Hypochlorite 12.5%Sodium sulfideSulfuric acid up to 50%Tannic acid

CyclohexaneDiesel FuelFatty acidsGasolineHeptaneHexane

KeroseneLardMineral spiritsSoap solutionsTurpentinePolymers

Oils:ASTM reference No.1,2,3CastorCoconutFuel

Oils:LinseedLubricatingMineral

Ferrous Chloride (up to 40%)Fluoboric Acid (up to 48%)Fluosilicic Acid (up to 25%)Hydrofluoric Acid (up to 48%)Nitric Acid (up to 71%)

Phosphoric Acid (up to 85%)Potassium Hypochlorite (up to 70%)Sodium Phosphate (up to 30%)Sulfuric Acid (up to 98%)

BasesSaltsKetonesAlcohols Isobutyl Alcohol

Applications:Ink and solvent productionBattery acid fillingSpecialty chemical production / processingSensitive fluid transfer

®Norprene is a registered trademark of Saint-Gobain.®

Tygothane is a registered trademark of Saint-Gobain.Note: Data shown at 72 degrees F.


TDS #85000-115 rev. 09182013


5 of 6

Dimensions:

Model Number Matrix:

Dim Inches cm

A

B

C

DE

10-1/4”

7-1/2”

14”

9-1/2”11”

2619

35.624.127.9

M-2 Series

F 3-3/8” 8.6A

F

B

E

C

D


3/8” OD x 1/4” ID Tube Compression Fitting, Natural PVDF (Kynar)

Inlet/Outlet Connection Size, Connection Type, Connection Material

Power Cord (operating voltage user selectable 115V/240 Vac 50/60Hz)

Pump Tube Material, Pump Tube Size, Output Range

Options (leave this blank for standard model)

Right facing pump head, input / output (Left facing fluid input / output is standard)

Down facing pump head, input / output (Left facing fluid input / output is standard)

1/2” Male NPT Fitting, Natural PVDF (Kynar)

240V / 50HZ, power cord AS 3112 plug (Australia/New zealand)

130 RPM (maximum rotor rotation speed)

115V / 60Hz, power cord NEMA 5/15 plug (US)


220V / 50HZ, power cord CEE 7/VII plug (EU)

Sample Model Number

Flex-Pro M-2

Maximum Motor Speed

2

4

5

6

4 - N H

R

D

S

S

M

X No Power Cord

8

Maximum Output Range

M 2 2

M

3/4” Tri-clamp connections, Natural PVDF (Kynar)C

2

-

Flex-Pro ProSeries-M Model Number

ND

NF

® Norprene .078 ID, 0.01 to 1.7 GPH® Norprene .250 ID, 0.03 to 5.5 GPH

® Tygothane .125 ID, 0.02 to 4.0 GPH

® Tygothane .187 ID, 0.05 to 9.3 GPH

GE

GG

Options (leave this blank for standard model with left facing pump head inlet/outlet)

Communications Interface - Profibus DPV1 C1

Communications Interface - Modbus RTU

Communications Interface - Modbus TCP

C2

C3

Communications Interface - Industrial EtherNet/IP C4

Communications Interface - Profinet RT I/OC5

- R-C4

® Norprene Chemical .250 ID, 0.08 to 14.9 GPHTHNH®

Norprene .250 ID, 0.07 to 13.8 GPH

NHL® Norprene .250 ID, 0.07 to 13.8 GPH (low psi)

TDS #85000-115 rev. 09182013



6 of 6

Features list:

Factory Authorized Representative:

Features:

TFD (Tube Failure Detection) System Alarm

FVS (Flow Verification System) Alarm *

Motor reverse (rotor reversible)

Output: One, 6 amp alarm relay

Input: One, dry contact closure 6-24 Vdc powered loop for remote start / stop

Input: Remote speed control via 4-20mA, 0-10VDC, high speed digital pulse, contact closure pulse

Display: Motor speed, Input signal values, Tube life timer, Tube Failure Detection (TFD) system and Flow Verification System (FVS) alarm status

Manual (local): speed adjustment

Remote input: 4-20mA

Remote input: high speed frequency (pulse) input

Remote input: pulse triggered batch dispensing

Three position pump head rotation

Available Operating Modes:

Optional: remote communications, Profibus DPV1, Modbus RTU, Modbus-TCP, EtherNet/IP, and Profinet RT I/O.

Output: Analog 4-20mA

5300 Business Drive, Huntington Beach, CA 92649Tel: 714-893-8529 Fax: 714-894-9492www.ProSeries-M.com Email: [email protected]


TM

TDS #85000-115 rev. 09182013


* Requires Micro-Flo Sensor sold separately

Optional Communications Commands List

60 second prime at maximum speed

Lock and unlock any touch pad button

Reset pump tube timer

Clear/reset general alarm

Set operating mode

Control Commands Available Pump Status Data

Start/Stop

Set motor speed (0.5 to 100.0%)

Pump head Cover on/off status

Status of each local touch pad button

Current operating mode selection

Motor direction

TFD (Tube Failure Detection) system status

Motor run/stop status

Priming status

FVS (Flow Verification System) status

Current pump operating speed

Current pump tube timer accumulated hours

Current analog input signal value in mA

General alarm status

Alarm output relay status

Pump model and software version

Current frequency input signal value in Hz

Current analog output signal value in mA

Applications:

NEMA 4X


! Municipal Water Treatment

! Municipal Wastewater Treatment

! Chemical Metering

! Chlorination

! Chloramination

! Fluoridation

! Polymer Injection

! Acid Injection

! Alum Injection

! PAC Injection

! Caustic Injection

Features:

5 Year Warranty

FLEX-PRO M-3 & M-4

Brushless DC Motor

10,000:1 Turndown ratio

!

!

!

!

!

!

!

!

!

!

Peristaltic pump design does not have valves that can clog requiring maintenance.

Self priming - even against maximum line pressure. By-pass valves are not required. Cannot vapor lock or lose prime.

! 10,000:1 turndown ratio with high resolution motor speed adjustment.

Control Inputs include: 4-20mA, 0-10Vdc, and Pulse inputs for remote external speed or batch control and 0-30 VDC / contact closure remote start/stop.

Revolution count display with user programmable alarm set-point for tube maintenance.

VGA Graphic multi-color backlit LCD displays remote/local control status, motor speed, output rate, input signal values, service and alarm status in three easy to see colors.

Outputs include: Scalable 4-20mA or pulse, one 250V/6A relay and three 115V/1A contact closures assignable to monitor various pump functions including TFD, FVS, revolution counter, remote/local, forward/reverse, input signals, output signals, motor on, motor fault, operating mode setting, and others.

Two CNC precision machined squeeze rollers and two alignment rollers provide factory calibrated optimum squeeze for unparalleled accuracy and extra long tube life.

Heavy duty rotor - single piece plastic rotor means no flexing and increased accuracy with no metal springs or hinges to corrode.

Inject at maximum pressure in either direction (clockwise or counter clockwise).

! Output rates to: 158.5 GPH (600 LPH) and pressures to 125 PSI (8.6 Bar).

! No maintenance brushless variable speed motor.

! Specially engineered tubing for long life at high pressures.

! Patented Tube Failure Detection (TFD) system. Senses tube failure by detecting chemical in the pump head. No false triggering from condensation or washdown.

Compatible with Blue-White’s output Flow Verification Sensor (FVS) system.


ProSeries-Md Peristaltic Metering Pumps

NEMA 4X (IP 66) Washdown

1 of 6

Model M-324-MNK Model M-424-BNL

Tube Failure Detection

Revolution Count Display & Alarm

NSF Listed Std. 61

s

Sold and serviced exclusively by highly skilled, factory authorized technicians.


s

TDS #85000-108 rev. 09182012


2 of 6

s FLEX-PRO ProSeries-Md Peristaltic Metering Pumps

Engineering Specifications:

Materials of Construction:Wetted components: Non-Wetted components:

Enclosure:413 Aluminum (Polyester powder coated)

Pump Head:q Valox (PBT) thermoplastic

Pump Head Cover:Clear Acrylic - Annealed for added strength and chemical resistance.Permanently lubricated sealed motor shaft support ball bearing.

Cover Screws:Stainless Steel

Roller Assembly:q Rotor: ..................................Valox (PBT)

Rollers: ...............................Nylon Roller Bearings: .................SS Ball Bearings Roller Shaft: ........................316 Stainless Steel

Motor Shaft:Chrome plated steel

TFD System Sensor pins:Hastelloy C-276

Power Cord:3 conductor, SJTW-A Water-resistant

Tube Installation Tool:Glass Filled Nylon

Mounting Brackets and Hardware:316 Stainless Steel

Motor speed adjustment range10,000:1 (0.001% - 100% motor speed)

Motor speed adjustment resolution0.1% increments > 10% motor speed0.01% increments > 1% motor speed and < 10%0.001% increments < 1% motor speed

Maximum viscosity12,000 Centipoise

Maximum suction lift:30 ft. Water, 0 psig (4.5 m, 0 bar)

Display3 color VGA backlit LCD, UV resistant.

Display resolution0.0 > 10% motor speed0.00 > 1% motor speed and < 10%0.000 < 1% motor speed

Display languagesEnglish, Spanish, French or German selectable.

KeypadEleven button positive action tactile switch keypad.

SecurityProgrammable 4-digit password.

Maximum working pressure (excluding pump tubes):125 psig (8.6 bar)Note: see individual pump tube assembly maximum pressure ratings.

Maximum Fluid temperature (excluding pump tubes):o o3/8” OD x 1/4” ID tubing connections: 130 F (54 C)

o oM/NPT connections: 185 F (85 C)Note: see individual pump tube assembly maximum temperature ratings.

Ambient Operating TemperatureO O O O14 F to 115 F (-10 C to 46 C)

Ambient Storage TemperatureO O O O-40 F to 158 F (-40 C to 70 C)

Operating Voltage:M-3 MODELS: 96 to 264VAC-50/60Hz, 220 VAM-4 MODELS: 96 to 264VAC-50/60Hz, 350 VA

Power Cord Options:115V60Hz = NEMA 5/15 (USA)230V60Hz = NEMA 6/15 (USA)220V50Hz = CEE 7/VII (EU)240V50Hz = AS 3112 (Australia/New Zealand)

Enclosure:NEMA 4X (IP66), Polyester powder coated aluminum. Maximum Overall Dimensions: M-3 models: 8-1/8”W x 10-3/4”H x 15-1/4”D (20.6W x 27.3H x 38.9D cm)M-4 models: 12-1/8”W x 14-1/4”H x 18-5/8”D (30.8W x 36.1H x 47.3D cm)

Approximate shipping wt:M-3 models: 33 lb. (15.0 Kg)M-4 models: 58 lb. (26.3 Kg)

Pump Tube Assembly (Model Specific - 2 provided):q q q Tubing: . . . . . Norprene or Norprene Chemical or Tygothane

Adapter fittings: .PVDF

Recommended Ancillary Items Sold Separately:

Injection / Back-flow Check valve: Body & insert: . . . . . . PVDF Check Ball: . . . . . . . . Ceramic Spring: . . . . . . . . . . Hastelloy C-276

q Ball Seat O-ring: . . . . . Viton (optional EP)q Static Seal O-ring: . . . . Viton (optional EP)

q Duckbill anti-scale valve: Santoprene

For “S” tubing type connections only: Suction Tubing: . . . . . 3/8” OD x 1/4” ID x 10’ Clear PVC Discharge Tubing: . . . . 3/8” OD x 1/4” ID x 10’ Polyethylene (LLDPE) Suction Strainer: . . . . . Polypropylene

For “B” tubing and “M” M/NPT connections only:Suction Strainer: Body: . . . . . . . . . . . . . . . . . PVDF Check Ball: . . . . . . . . . . . . Ceramic

q Ball Seat O-ring: . . . . . . . . Viton (optional EP)

For “C” Tri-clamp connections only:none

TDS #85000-108 rev. 09182012


3 of 6


Output Specifications:

* Inlet/outlet connection typeS = 3/8” OD x 1/4” ID tubing compressions type connections M = 1/2”male NPT, B = 1/2” ID tubing barb type connections (M-4 models only),C = 3/4” tri-clamp connections

(M-3 models only),

Output RangeMax

SpeedM-3 Model Numbers

MaxPressure

MaxTemperature


GPH

.0004 - 4.60

.0010 - 10.1

.0024 - 24.9

.0028 - 28.5

LPH

.0017 - 17.4

.0038 - 38.4

.0094 - 94.2.0108 - 108

ML/MIN

.0290 - 290

.0637 - 637.1570 - 1570.1800 - 1800

RPM

125125125125

115V AC

24-*GE24-*GG24-*GH

M-3M-3M-3M-324-*GK

230V AC

25-*GE25-*GG25-*GH

M-3M-3M-3M-325-*GK

220V AC

26-*GE26-*GG26-*GH

M-3M-3M-3M-326-*GK

®Norprene Chemical M-3 Tube Pumps

Meets FDA criteria for food | Superior chemical resistanceListed under NSF Std. 61 | LPH

.0055 - 55.1.0108 - 108

230V AC

25-*M-3 THM-325-*TK

115V AC

24-*M-3 THM-324-*TK

GPH

.0014 - 14.5

.0028 - 28.5

220V AC

26-*M-3 THM-326-*TK

ML/MIN

.1800 - 1800.0920 - 920

RPM

125125

®Norprene M-3 Tube Pumps Listed under NSF Std. 61 Meets FDA criteria for food | Excellent chemical resistance | | CIP | SIP

LPH

.0030 - 30.0

.0066 - 66.0

.0096 - 96.0.0126 - 126

.0007 - 7.92

230V AC

25-*ND

25-*NH

25-*NK

M-3M-325-*NFM-3M-325-*NJM-3

115V AC

M-324-*ND

24-*NH

24-*NK

M-324-*NFM-3M-324-*NJM-3

GPH

.0008 - 7.90

.0017 - 17.4

.0025 - 25.3

.0033 - 33.3

.0002 - 2.10

220V AC

26-*ND

26-*NH

26-*NK

M-3M-326-*NFM-3M-326-*NJM-3

ML/MIN

0132 - 132..0500 - 500

.1097 - 1097

.1596 - 1596

.2100 - 2100

RPM

125125125125125

PSI (bar)

65 ( )65 ( )65 ( )

4.54.54.5

65 (4.5)

PSI (bar)

125 (8.6)

125 (8.6)125 (8.6)125 (8.6)

125 (8.6)

PSI (bar)

50 (3.4)50 (3.4)

LPH

.0108 - 108

.0168 - 168

.0192 - 192

.0204 - 204

.0378 - 378

.0600 - 600

230V AC

25-*NH25-*NJ

25-*NL25-*NP

M-4M-4M-425-*NK

M-425-*NHHM-4M-4

115V AC

24-*NH24-*NJ

24-*NL24-*NP

M-4M-4M-424-*NK

M-424-*NHHM-4M-4

220V AC

26-*NH26-*NJ

26-*NL26-*NP

M-4M-4M-426-*NK

M-426-*NHHM-4M-4

ML/MIN

.280 - 2800

.320 - 3200

.340 - 3400

.630 - 63001.00 - 10000

.180 - 1800

RPM

125125125125125125

PSI (bar)

125 (8.6)100 (6.9)80 (5.5)

50 (3.4)30 (2.0)

100 (6.9)

F (C)

185 (85)

185 (85)185 (85)185 (85)

185 (85)

F (C)

130 (54)130 (54)

F (C)

130 (54)130 (54)130 (54)130 (54)

F (C)

185 (85)185 (85)185 (85)

185 (85)185 (85)

185 (85)

®Norprene M-3 Tube Pumps

Meets FDA criteria for food | Excellent chemical resistance Listed under NSF Std. 61 | | Extra long life at low pressuresLPH

.0126 - 126

230V AC

25-*NKLM-3

115V AC

24-*NKLM-3

GPH

.0033 - 33.3

220V AC

26-*NKLM-3

ML/MIN

.2100 - 2100

RPM

125

PSI (bar)

30 (2.1)

F (C)

185 (85)


GPH

.0039 - 39.6

.0055 - 55.5

.010 - 100.0

LPH

.0150 - 150

.0210 - 210

.0378 - 378

ML/MIN

.350 - 3500

.630 - 6300

.250 - 2500

RPM

125125125

115V AC

24-*GH24-*GK

M-4M-4

M-424-*GKK

230V AC

25-*GH25-*GK

M-4M-4

M-425-*GKK

220V AC

26-*GH26-*GK

M-4M-4

M-426-*GKK

®Norprene Chemical M-4 Tube Pumps Meets FDA criteria for food | Superior chemical resistanceListed under NSF Std. 61 |

LPH

.0078 - 78.0.0162 - 162.0192 - 192

230V AC

25-*M-4 THM-425-*TK

M-425-*THH

115V AC

24-*M-4 THM-424-*TK

M-424-*THH

GPH

.0020 - 20.6

.0042 - 42.8

.0050 - 50.7

220V AC

26-*M-4 THM-426-*TK

M-426-*THH

ML/MIN

.270 - 2700

.320 - 3200

.130 - 1300

RPM

125125125

®Norprene M-4 Tube Pumps Meets FDA criteria for food | Excellent chemical resistance Listed under NSF Std. 61 | | CIP | SIP

Output RangeMax

SpeedM-4 Model Numbers

PSI (bar)

65 ( )65 ( )

4.54.5

65 (4.5)

MaxPressure

PSI (bar)

30 (2.1)30 (2.1)30 (2.1)

Max Temperature

F (C)

130 (54)130 (54)130 (54)

F (C)

130 (54)130 (54)130 (54)

®Norprene M-4 Low Pressure Tube Pumps Meets FDA criteria for food | Excellent chemical resistance Listed under NSF Std. 61 | | Extra long life at low pressures

LPH

.0192 - 192

.0420 - 420

230V AC

25-*NKLM-4M-425-*NKKL

115V AC


GPH

.0050 - 50.7.011 - 111.0

220V AC


ML/MIN

.700 - 7000

.320 - 3200

RPM

125125

PSI (bar)

30 (2.1)30 (2.1)

F (C)

185 (85)185 (85)

GPH

.0028 - 28.5

.0044 - 44.4

.0050 - 50.7

.0054 - 54.0

.010 - 100.0

.015 - 158.5

TDS #85000-108 rev. 09182012



4 of 6

Chemical Resistance of Tubing:®Norprene Tubing

Meets FDA criteria for food | Excellent chemical resistance

®Tygothane TubingMeets FDA criteria for food | Resistant to oils, greases and fuels

®Norprene Chemical Tubing - Ultra smooth plasticizer-free bore (inner liner)

Meets FDA criteria for food | Superior chemical resistance

Alcohol generalAluminum Sulfate (Alum)Ammonium chlorideAmmonium hydroxide

Benzyl alcoholBleachBrine solutionsCalcium Hydroxide 10% (Lime Slurry)Calcium hypochlorite 20%

Ammonium Sulfate (LAS)

Citric Acid 50%Ethylene glycolFerric chlorideFerric nitrateFerric sulfateFerrous chloride - 43% in waterFerrous sulfate

Formic acidGlucose

Fluosilicic Acid (up to 25%)

Hydrochloric acid 33%Hydrocyanic acidHydrogen peroxideHypochlorous acidIodineMagnesium chlorideMagnesium sulfatePhosphoric acidPlating solutionsPolyaluminum Chloride (PAC)

Potassium hydroxidePotassium permanganate 40%Propylene glycolSodium hydroxide 50%Sodium BisulfiteSodium Chlorite 12%Sodium Hypochlorite 12.5%Sodium sulfideSulfuric acid up to 50%Tannic acid

CyclohexaneDiesel FuelFatty acidsGasolineHeptaneHexane

KeroseneLardMineral spiritsSoap solutionsTurpentine

Oils:ASTM reference No.1,2,3CastorCoconutFuel

Oils:LinseedLubricatingMineral

Ferrous Chloride (up to 40%)Fluoboric Acid (up to 48%)Fluosilicic Acid (up to 25%)Hydrofluoric Acid (up to 48%)Nitric Acid (up to 71%)

Phosphoric Acid (up to 85%)Potassium Hypochlorite (up to 70%)Sodium Phosphate (up to 30%)Sulfuric Acid (up to 98%)

BasesSaltsKetonesAlcohols Isobutyl Alcohol

Applications:Ink and solvent productionBattery acid fillingSpecialty chemical production / processingSensitive fluid transfer

®Norprene is a registered trademark of Saint-Gobain.®Tygothane is a registered trademark of Saint-Gobain.

Pump Tube Assembly Output Specifications:

LPH

.

.

.

0007 - 7.92.0030 - 30.0.0066 - 66.0.0096 - 96.0.0126 - 126.0126 - 1260055 - 55.1.0108 - 1080017 - 17.4.0038 - 38.4.0094 - 94.2.0108 - 108

GPH

.

.0014 - 14.5

.0028 - 28.5

.

0002 - 2.10.0008 - 7.90.0017 - 17.4.0025 - 25.3.0033 - 33.3.0033 - 33.3

0004 - 4.60.0010 - 10.1.0024 - 24.9.0028 - 28.5

Output Range

Model M-3 - Available Pump Tubes and Output Ranges

PSI (bar)

125 (8.6)

125125 (8.6)

(8.6)125 (8.6)125 (8.6)30 (2.1)50 (3.4)50 (3.4)65 (4.5)65 (4.5)65 (4.5)65 (4.5)

Max OutputPressure

TubeMaterialMaterial

NorpreneNorpreneNorpreneNorpreneNorpreneNorprene

Norprene ChemicalNorprene Chemical

TygothaneTygothaneTygothaneTygothane

Code

NDNFNHNJNK

NKLTHTKGEGGGHGK

ML/Min

.

.0920 - 920.1800 - 1800.

0132 - 132.0500 - 500

.1097 - 1097

.1596 - 1596

.2100 - 2100

.2100 - 2100

0290 - 290.0637 - 637

.1570 - 1570

.1800 - 1800

TubeSize

F (C)

185 (85)

185 (85)185 (85)

185 (85)

185 (85)185 (85)130 (54)130 (54)130 (54)130 (54)130 (54)130 (54)

MaxTemp

LPH

.

.

.

0108 - 108.0168 - 168.0192 - 192.0204 - 204.0378 - 378.0600 - 600.0192 - 192.0420 - 4200078 - 78.0.0162 - 162.0192 - 1920150 - 150.0210 - 210.0378 - 378

GPH

.

.0020 - 20.6

.0042 - 42.8

.0050 - 50.7

.0039 - 39.6

0028 - 28.5 .0044 - 44.4.0050 - 50.7.0054 - 54.0

.0100 - 100.0

.0158 - 158.5.0050 - 50.7.0111 - 111.0

.0055 - 55.5.0100 - 100.0

Output Range

Model M-4 - Available Pump Tubes and Output Ranges

PSI (bar)

125 (8.6)100 (6.9)80 (5.5)

100 (6.9)50 (3.4)30 (2.1)30 (2.1)30 (2.1)30 (2.1)30 (2.1)30 (2.1)65 (4.5)65 (4.5)65 (4.5)

Max OutputPressure

TubeMaterialMaterial

NorpreneNorpreneNorpreneNorpreneNorpreneNorpreneNorpreneNorprene

Norprene ChemicalNorprene ChemicalNorprene Chemical

TygothaneTygothaneTygothane

Code

NHNJNK

NHHNLNP

NKLNKKL

THTK

THHGHGK

GKK

ML/Min

.

.

1800 - 1800.2800 - 2800.3200 - 3200.3400 - 3400.6300 - 63001.00 - 10000.3200 - 3200.7000 - 70001300 - 1300.2700 - 2700.3200 - 3200.2500 - 2500.3500 - 3500.6300 - 6300

TubeSize

F (C)

185 (85)185 (85)185 (85)185 (85)185 (85)185 (85)185 (85)185 (85)130 (54)130 (54)130 (54)130 (54)130 (54)130 (54)

MaxTemp

A3-ND-R

A3-NH-RA3-ND-R

A3-NH-RA3-NH-RA3-NH-RA3-TH-RA3-TH-RA3-GE-RA3-GE-RA3-GE-RA3-GE-R

Required Roller Part Number

A4-NH-RA4-NH-RA4-NH-RA4-TH-RA4-NL-RA4-NL-RA4-TH-RA4-TH-RA4-TH-RA4-TH-RA4-TH-RA4-GH-RA4-GH-RA4-GH-R

Required Roller Part Number

TDS #85000-108 rev. 09182012


5 of 6


Dimensions:

Model Number Matrix:

Dim Inches cm

A

B

C

DE

10-3/4”

8-1/8”

15-1/4”

10”12-1/4”

27.320.6

38.925.431.0

M-3 Series

Inches cm

14-1/4”

12-1/8”

18-5/8”

11”13-5/8”

36.130.8

47.327.934.6

M-4 Series

F 4-1/4” 10.7 6” 15.2

14.2"(36.1cm)

6.0"(15.2cm)

12.13"30.8cm)

Front View

11.0"(27.9cm)

13.63”(34.6cm)

18.63”(47.3cm)

Right View

A

B

F

C

D

E

3/8” OD x 1/4” ID Tube Compression Fitting, Natural PVDF (Kynar), M-3 models only

Inlet/Outlet Connection Size, Connection Type, Connection Material

1/2” ID Tubing Barb Fitting, Natural PVDF (Kynar), M-4 models only

Power Cord (operating voltage requirement 96VAC to 264VAC)

Pump Tube Material, Pump Tube Size

Options (leave this blank for standard model)

Right facing pump head, input / output (Left facing fluid input / output is standard)

Down facing pump head, input / output (Left facing fluid input / output is standard)

1/2” Male NPT Fitting, Natural PVDF (Kynar)

240V / 50HZ, power cord AS 3112 plug (Australia/New zealand)

125 RPM (maximum rotor rotation speed)



220V / 50HZ, power cord CEE 7/VII plug (EU)

Sample Model Number

Flex-Pro M-3 maximum output 33.3 GPH(126 LPH)

Maximum Motor Speed

2

4

5

6

4 - N H

R

D

M

S

M

X No Power Cord

8

Flex-Pro M-4 maximum output 158.5 GPH (600 LPH)

B

4

Maximum Output Range

M 4 2

M

3/4” Tri-clamp connections, Natural PVDF (Kynar)C

3

-

®Flex-Pro ProSeries-M Model Number®

® Norprene M-3 models.075 ID, only

® Norprene Chemical .250 ID

GE

GG

GH

® Norprene .250 ID

® Norprene .312 ID

® Norprene .375 ID

® Tygothane .125 ID, M-3 models only

® Tygothane .187 ID, M-3 models only

® Tygothane .250 ID

ND

NH

NJ

NK

TH

GK®

Tygothane .375 ID

NKL®

Norprene .375 ID (30 PSI max pressure - longer life)

NL

NP ® Norprene .750 ID, M-4 models only

® Norprene .500 ID, M-4 models only

NKKL®

Norprene .375 ID (30 PSI max - Dual Tube), M-4 models only

® Norprene .250 ID (Dual Tube), M-4 models only NHH

TH

® Norprene Chemical .375 IDTK

® Norprene Chemical .250 ID (Dual Tube), M-4 models only THH

® Norprene Chemical .375 ID (Dual Tube), M-4 models onlyTKK

GKK ® Tygothane .375 ID (Dual Tube), M-4 models only

GHH®

Tygothane .250 ID (Dual Tube), M-4 models only

® Norprene M-3 models.155 ID, onlyNF

TDS #85000-108 rev. 09182012

5300 Business Drive, Huntington Beach, CA 92649Tel: 714-893-8529 Fax: 714-894-9492www.ProSeries-M.com Email: [email protected]


All trademarks are the property of their respective owners.


6 of 6

Features list:

* Requires Micro-Flo Sensor sold separately

Features

TFD (Tube Failure Detection) System Alarm

FVS (Flow Verification System) Alarm *

10,000:1 turndown reversible motor.

Tube Life revolution counter with user programmable alarm set-point.

Output: One, 6 amp alarm relay

Output: Three, dry contact or maximum 30VDC/115VAC 1 amp contact closures

Output: Programmable 4-20mA signal or high speed pulse, proportional to pump output

Input: One, contact closure (remote start / stop)

Input: Remote speed control via 4-20mA, 0-10VDC, high speed digital pulse, contact closure pulse

Remote/Local control settings

Password protection

Display: Motor speed, Tube life revolutions, Tube Failure Detection (TFD) system and Flow Verification System (FVS) alarm status

Display: Output in ml/min, oz/min, L/hr, Gal/hr, Gal/day, RPM, and input signal values

Automated PPM chemical dosing system

Manual (local): speed adjustment

Remote input: 4-20mA

Remote input: 0-10 VDC

Remote input: high speed frequency (pulse) input

Remote input: pulse triggered batch dispensing

Remote input: proportional PPM (parts per million) dosing with high speed frequency (pulse) input

Manual (local): batch dispensing

Manual (local): repeating cycle timer

Manual (local): fixed speed PPM (parts per million) dosing

Three position pump head rotation

Available Operating Modes:


Four output contacts can be triggered by the status of the TFD system, FVS system, general alarm, rotor direction, motor run/stop,revolution count, motor fail, remote/local setting, input signal failure, output signal failure, and currently active operating mode.

Power interruption re-start options.

Set maximum motor RPM limit.

Factory Authorized Representative:

TDS #85000-108 rev. 09182012


q

Documents

85000-115 TECH M2 8 x 11 09182013 - SPD Sales Limited - Homespdsales.com/wp-content/uploads/2014/01/M-Series_Metering_Pumps.pdf · Display: Motor speed, Input signal values, Tube