650-180 SMB System Engineer

8/14/2019 650-180 SMB System Engineer

1/15

Exam Name: SMBEN - SMB Solutions for EngineersExam Type: CiscoExam Code: 650-180 Total Questions: 61

Page 1 of 15

Question: 1Which one of the following feature is the most important one of the Cisco (Linksys) SmallBusiness NSS platform to distinguish it from other NAS systems?

A. The OS resides on the chassis

B. The option for RAID 10C. A disk-based encryption mechanismD. One terabyte storage capacity per drive

Answer: A

Question: 2In a traditional telephony environment, the station shelf will be replaced by which of the followingin an IP telephony deployment?

A. A call control serverB. A TDM trunk shelfC. The auto-attendant applicationD. A Layer 2 switch

Answer: D

Question: 3Which of the following is an example of converting signal from a TDM to an IP voice protocol via avoice gateway?

A. SIP to CASB. H.323 to SIPC. CAS to Q.931D. Q.931 to H.323

Answer: D

Question: 4Which of the following is the exact attribute of the out-of-band management port on the ASA5510?

A. It is the only ASA console port.B. It can route network traffic.C. It functions at serial line speed.D. It can be used as a 10/100 switch port.

Answer: B

Question: 5

When to configure the IP routing while installing a new Cisco UC520?

A. When analog PSTN trunks are used.B. When digital PSTN trunks are used.C. When the service provider assigns static IP information.D. When the service provider assigns dynamic IP information.

Answer: C

Question: 6


2/15


Page 2 of 15

Refer to the following Cisco products, which three reside on the UC500 platform? (Choose three)

A. Cisco IOSB. Cisco Unity ExpressC. Cisco IOS Firewall

D. Cisco Unified Communications Manager Express

Answer: B, C, D

Question: 7Refer to the following attributes, which three are concerning to the CE500 platform? (Choosethree)

A. Power over EthernetB. Multiprotocol switchingC. Smartport advisorD. GUI device manager

Answer: A, C, D

Question: 8Mobility Express offers businesses the versatility to evolve and scale from a mobile foundationdelivering business-grade wireless features to a sophisticated wireless network capable ofsupporting advanced mobility services and applications. Which of the following attribute existsONLY on the UC520 model in the Cisco Mobility Express product line?

A. Use of 802.11i signalingB. Comes with bundled CCA Management softwareC. Ability to function without an external controllerD. Use of WPA2 security

Answer: D

Question: 9Which of the following platform is composed of SDM, modular upgrades, 1500 VPN tunnels, andsixty-four (64) 10/100 Mbps PoE switch ports?

A. ISR 1800B. ISR 2800C. Catalyst 500D. Catalyst 3750

Answer: B

Question: 10

Which two of the following methods are true about testing the LAN connectivity on the CiscoCE520? (Choose two.)

A. Ping the IP address of the Cisco-Distribution VLAN from the Cisco UC520 console.B. Ping the IP address of the Cisco-Voice VLAN from a device attached to the Cisco CE520C. Ping the IP address of the Cisco-Data Access VLAN from the Cisco UC520 console.D. Ping the IP address of the Cisco-Data VLAN from a device attached to the Cisco CE520

Answer: A, B


3/15


Page 3 of 15

Question: 11In a SOHO (Small Office and Home Office) or small business, which two of the followingstatements are applicable to a typical SPA9000 Voice System? (Choose two)

A. Analog phones can be connected via the available analog phone ports.

B. Connection to the PSTN can be provided using the POTS gateway.C. The base SPA9000 system allows for up to sixteen (16) IP phones to place or receive calls.D. The expanded SPA9000 system provides support for up to twenty (20) IP phones.

Answer: A, C

Question: 12Refer to the following protocols, which three have something to do with a voice network? (Choosethree)

A. SCCPB. RTPC. FXSD. TFTP

Answer: A, B, D

Question: 13Refer to the following features, which three are able to be found in the Cisco 521 AP? (Choosethree)

A. Ideal for voice and videoB. Management through CCAC. Zero touch managementD. Simultaneous air monitoring and traffic delivery

Answer: B, C, D

Question: 14From data and voice to video and wireless, the Cisco Smart Business Communications Systemhas everything you need to meet your communications needs. Which three functions areprovided by the Cisco UC500 component of the Smart Business Communication System?(Choose three)

A. Auto AttendantB. Layer 2 switchingC. Cisco Unity voice mailD. VPN and encryption

Answer: A, B, D

Question: 15Refer to the following features, which three are supported by the Cisco UC520? (Choose three)

A. Analog devicesB. Cisco Unity ExpressC. Distributed routingD. Security, firewall and VPN

Answer: A, B, D


4/15


Page 4 of 15

Question: 16From data and voice to video and wireless, the Cisco Smart Business Communications Systemhas everything you need to meet your communications needs. What port role assignment wouldyou make for the Gigabit Ethernet port on the Cisco CE520 used in this system?

A. Cisco 871WB. IP Phone and desktopC. Cisco CE520D. Cisco UC520

Answer: D

Question: 17So as to join a device to a Cisco UC520 created community, which two of the following arenecessary? (Choose two)

A. Telnet disabled on the Cisco CE520B. Teleworker access routers must be preconfigured with a VPNC. Cisco Configuration Assistant installed on user PCsD. HTTP(s) enabled on the Cisco CE520

Answer: B, D

Question: 18In computer networking, which is the exact answer that differentiates the Cisco Adaptive SecurityAppliance (Cisco ASA) and Cisco ISR product families? What one factor Select exactly 1 (s) fromthe following:

A. Only the ISR provides an IOS-based firewall.B. Only the ISR provides application inspection.C. Only the ASA provides an IOS-based IPS.D. Only the ASA provides IPsec and SSL VPN capabilities.

Answer: A

Question: 19Which two functions are provided by the dual Internet ports on the Cisco Small Business RV0XXplatforms? (Choose two)

A. Load balancing over two connections to the InternetB. Intrusion preventionC. A backup link to PSTN for voice communicationsD. A backup connection to the Internet

Answer: A, D

Question: 20Refer to the following features, which three are beneficial features available on the Cisco.comwebsite? (Choose three)

A. Knowledge transfer resourcesB. Online solution troubleshootingC. Online hardware replacementD. Online product and technology information


5/15


Page 5 of 15

Answer: A, C, D

Question: 21Refer to the following products, which Cisco support service product is sold, supported, and

delivered by partners?

A. Cisco SMARTnet for SBCSB. Cisco Smart Foundation ServiceC. Cisco Technical Assistance CenterD. Cisco Smart Care Service

Answer: D

Question: 22Concerning the following answers, which one is the primary partner benefit of selling services?

A. Fewer customer call backsB. Easier customer sales cycleC. Available financing optionsD. Increased margins

Answer: D

Question: 23In a keyswitch system, you can set up most of your phones to have a nearly identicalconfiguration, in which:

A. All IP Phones in the system have a single unique extension number.B. All IP Phones are able to answer any incoming PSTN call on any line.C. PSTN calls are routed through a receptionist or automated attendant.

Answer: B

Question: 24Which of the following support option is composed of basic phone support, fee-based add-onsupport, and VAR tech-to-tech assistance?

A. Smart Care ServiceB. SMARTnet ServiceC. Cisco Small Business products supportD. Cisco Smart Foundation Service

Answer: C

Question: 25In computing, failover is the capability to switch over automatically to a redundant or standbycomputer server, system, or network upon the failure or abnormal termination of the previouslyactive application, server, system, or network. Refer to firewall failover, which of the followingstatement is true in the Main Office Hybrid topology with high availability?

A. Two ASAs provide failover over a dedicated connection.B. An ASA and an ISR provide failover to one another.C. HSRP is used for failover between two firewall devices.D. One ASA chassis provides two redundant connections to the Internet.


6/15


Page 6 of 15

Answer: A

Question: 26Two routers are used to provide primary and failover paths to WAN and Internet links in a Main

Office high-availability architectural model. What if one of the routers fails? Which of the followingprotocol is recommended by the model to provide failover for WAN and Internet traffic?

A. OSPFB. HSRPC. A Cisco proprietary protocolD. The protocol in use by the ISP

Answer: B

Question: 27Refer to the following features, which two have something to do with a distribution layer ratherthan with an access layer switch?

A. PoEB. Apply QoS markingsC. Implement security featuresD. Process large amounts of traffic

Answer: B, D

Question: 28Pay attention to the following exhibit:Which one is entailed by "locking down" the router?


7/15


Page 7 of 15

A. Disabling HTTPS access to Cisco SDMB. Disabling all the vulnerable services on the router.C. Prohibiting console access to the router

D. Shutting down all the router's interfaces

Answer: B

Question: 29So as to accomplish time synchronization, which three of the following options are helpful whenconfiguring time on a device through the SDM interface?

A. SNTPB. NTPC. Synchronize with ISRD. Synchronize with my PC

Answer: A, B, D

Question: 30As for an 802.11b wireless signal, what is the possible maximum data transmission rate?

A. 11 MbpsB. 1 MbpsC. 6.5 MbpsD. 25 Mbps


8/15


Page 8 of 15

Answer: A

Question: 31The Cisco Mobility Express Solution is specifically designed for small and medium-sizedbusinesses (SMBs) to cost-effectively deliver business-class mobility features, standards-based

security, built-in reliability, and streamlined management. Which three of the following areattributes of the Cisco Mobility Express solution? (Choose three)

A. The solution provides voice over Wi-Fi with minimal configuration.B. The solution grows with the customer.C. The solution includes Radio Resource Management.D. Mobility Express is optimized for a temporary field office.

Answer: A, B, C

Question: 32Cisco Configuration Assistant simplifies the task of configuring, deploying, and administering theCisco Smart Business Communications System -- a complete system of advanced voice, data,security, and wireless networking products designed specifically for small and medium-sizedbusinesses. Cisco Configuration Assistant improves network security and performance andsubstantially reduces deployment and configuration time. Which three types of device informationdoes Cisco Configuration Assistant retain so as to save time during rediscovery? (Choose three)

A. IP AddressB. TopologyC. Host NameD. Communication Protocol

Answer: A, C, D

Question: 33An Intrusion prevention system (IPS) is a network security device that monitors network and/orsystem activities for malicious or unwanted behavior and can react, in real-time, to block orprevent those activities. If a customer wants to acquire Intrusion Prevention and Content Securityservices in a Cisco security solution, which of the following statement is true?

A. They are bundled on the ASA 5505.B. A hardware module addition is required on the ASA 5510/5520.C. A hardware module addition is required on the ISR platforms.D. The Cisco security portfolio includes a third-party IPS.

Answer: B

Question: 34The Session Initiation Protocol (SIP) is a signaling protocol, widely used for controlling multimedia

communication sessions such as voice and video calls over Internet Protocol (IP). Which three ofthe following are features of the SIP protocol? (Choose three)

A. Assigns text-based device addressesB. Sends requests to network gatewaysC. Provides a secure communication pathD. Sessions are initiated by end devices

Answer: A, B, D


9/15


Page 9 of 15

Question: 35Pay attention to the following exhibit:What will do to ensure the security of the router from this Cisco SDM Security Audit Wizardscreen?

A. Click Fix All, then clear CDP check box, then Next, then manually disable CDP on the WANinterface.

B. Click Fix All, then clear CDP check box, then Next, then manually disable CDP on the WANinterface, then immediately reboot the router.

C. Click Fix All, then clear CDP check box, then Next.D. Click Fix All, then clear CDP check box, then Next, then immediately reboot the router.

Answer: A

Question: 36Which of the following statement best describes the function of an IPS?

A. IPS scans packets for malicious activity.B. IPS provides standard or expanded firewall functions.C. IPS scans packet headers for allowed IP address matches.D. IPS hosts client communication through an encrypted tunnel.

Answer: A

Question: 37Pay attention to the following exhibit:


10/15


Page 10 of 15

In computer networking, network address translation (NAT) is the process of modifying networkaddress information in datagram packet headers while in transit across a traffic routing device forthe purpose of remapping a given address space into another. The ISR performs NAT for thisnetwork. What is the most likely IP address for the Serial 0 interface?

A. 10.11.31.100B. 256.11.41.100C. 10.11.41.100D. 50.100.1.100

Answer: D

Question: 38Taking the following answers into consideration, which three security measures are parts ofInfrastructure Protection in a Cisco Integrated Security Design model? (Choose three)

A. Traffic controlB. Worm mitigationC. Port-based securityD. Disabling unused services

Answer: A, C, D

Question: 39A customer??s task installation performance ability will be helpful to determine whether Cisco orCisco Small Business products are the appropriate solution to recommend or not. Which of thefollowing answer is the key skill required for Cisco products installation?

A. Knowledge of the OSI model

B. TCP/IP network design skillsC. Configuration and management proficiencyD. Campus network installation experience

Answer: C

Question: 40Choose the exact program which houses all the SMB partner training resources:

A. Select Certification


11/15


Page 11 of 15

B. SMB UniversityC. Partner Education ConnectionD. Market Cisco Technologies and Services

Answer: B

Question: 41Cisco SMB Class Solutions include intelligent application-enabling network services, innovativeend-user applications, a solid network infrastructure, and responsive customer services, includingfinancing, training, service, and support. Which three of the following are functions provided by allISR models in a SMB network solution? (Choose three)

A. VPN servicesB. Modular upgradesC. QoS markingD. Routing to WAN and Internet

Answer: A, C, D

Question: 42A customer??s task installation performance ability will be helpful to determine whether Cisco orLinksys is appropriate solution to recommend or not. Which of the following answer is the key skillrequired for Cisco products installation?

A. TCP/IP network designB. Knowledge of the OSI modelC. Campus network installation experienceD. Configuration and management proficiency

Answer: C

Question: 43The Cisco Smart Foundation Service is entry-level technical support service that provides thesupport that small businesses need to help them maintain network reliability and minimizedisruption to business. The Cisco Smart Foundation service has been specifically designed forsmall and medium-sized businesses (SMBs) and provides the easy, cost-effective networksupport businesses need to help ensure operational reliability, contain costs, and protect yourinvestment on Cisco SMB Class networking solutions. Which three are the attributes sought in atarget customer for Cisco Smart Foundation services? (Choose three)

A. 50 or fewer network devicesB. Skilled on-site customer IT staffC. Fewer than 250 network usersD. Network is not mission-critical to business

Answer: A, C, D

Question: 44The Cisco Smart Business Roadmap (SBR) helps Small and Medium-Sized Businesses improveoperational efficiency through technology. In accordance with Cisco SBR, which of the followingare the two reasons to use a consultative selling approach in selling Cisco products and solutionsto SMB customers? (Choose two)

A. You can provide a more effective, immediate, and long-term solution for your clients.


12/15


Page 12 of 15

B. Selling strategies must address business and technology needs rather than explain productfeatures, benefits, and technical attributes.

C. Regulatory compliance (for example, HIPAA and the Graham-Leach-Bliley Act) is driving theneed for customers to effectively document and secure data.

D. The business decision maker (BDM) may deny the technical decision maker (TDM) request for

budget, basing a decision primarily on price and may not readily see the value of the Ciscobrand.

Answer: B, D

Question: 45Compared with standard voice-mail systems, what is the advantage of integrated messaging?

A. Provides a toolbar to see the status of coworkersB. Provides text versions of your voice-mail messagesC. Eliminates the need for a live operator to answer the phoneD. Forwards voice-mail messages to your email at .wav files

Answer: D

Question: 46The Cisco Smart Business Roadmap enables SMBs to align a network technology plan with theirbusiness priorities, which is based on the principal that to remain competitive and thrive,businesses must match technology and network solutions to critical business challenges. Whichtwo of the following answers are indentified by independent research as key SMB businesschallenges? (Choose two)

A. EfficiencyB. SecurityC. Legacy equipmentD. International competition

Answer: A, B

Question: 47The Cisco Services Accelerate Program offers registered Cisco channel partners a robust trainingcurriculum designed to help you increase your services booking and business value. Whichservice is offered by the Cisco Services Accelerate Program to registered Cisco ChannelPartners?

A. Two new incentive programsB. Additional product information storageC. Ability to market Cisco technologies and solutionsD. A training curriculum designed to increase services

Answer: D

Question: 48IPsmartSuite is specifically designed for small companies, many of which lack the IT resources tomanage multiple software applications and complex implementations. It focuses in which of thefollowing vertical markets?

A. RetailB. LegalC. Healthcare


13/15


Page 13 of 15

D. Manufacturing

Answer: A, B, C, D

Question: 49

Which of the following answer is the most appropriate method to design the LAN in the SmartBusiness Communications System?

A. Using the core layerB. Using the access layerC. Combines the core and distribution layersD. Combines the access and distribution layers

Answer: B

Question: 50From data and voice to video and wireless, the Cisco Smart Business Communications Systemhas everything you need to meet your communications needs. Which three are the foundationalhardware components that comprise the Smart Business Communication System? (Choosethree)

A. Catalyst ExpressB. Cisco Unified CallConnectorC. Cisco 500 series phonesD. Cisco Unified Communication 500 series

Answer: A, C, D

Question: 51Which two of the following services are provided to each teleworker, home office, or mobileworker location in the Smart Business Communications System? (Choose two)

A. Voice gatewayB. Instant messagingC. Integrated securityD. Data networking

Answer: A, D

Question: 52If we add a Wireless LAN Controller to their Smart Business Communications System, what willbe of the two benefits for a client? (Choose two)

A. Increase connection speedsB. Allow for guest access

C. Add additional access pointsD. Network management with CLI

Answer: B, C

Question: 53Refer to the following benefits, which two can we see from installing Cisco Monitor Director at anSMB site for the partner selling the solution? (Choose two)

A. Allows the end customer to get free software updates


14/15


Page 14 of 15

B. Monthly recurring revenue modelC. Automated monthly reporting on system performanceD. Simplifies Smart Business Communications System installation

Answer: B, C

Question: 54The voice and data devices in the LAN for the Smart Business Communications System areorganized:

A. By WAN addressB. By VLAN associationC. By work group affiliationD. By LAN switchport assignment

Answer: B

Question: 55Cisco Unified CallConnector is integrated with Cisco Unified CallManager Express to deliverseasy-to-use call control and presence features that can increase productivity and enhancecommunications. Which two CRM servers of the following allow Cisco Unified Call Connector tobe configured for connectivity? (Choose two) Which twoSelect exactly 2 answer(s) from thefollowing:

A. OncontactB. Microsoft DynamicsC. ACT!D. Salesforce.com

Answer: B, D

Question: 56An integral part of the Cisco Unified Communications family of products, Cisco UnifiedCallConnector is integrated with Cisco Unified CallManager Express to delivers easy-to-use callcontrol and presence features that can increase productivity and enhance communications.Which two of the following answers are benefits provided by Cisco Unified CallConnector tocustomer communication? (Choose two)

A. Screen Pops for incoming callsB. Status of coworkers before placing a callC. Click-to-dial access only for WebEx meetingsD. Connect feature in Communications Manager Express

Answer: A, B

Question: 57Cisco Smart Designs provide network solution implementation best practices in an easy-to-followformat. The main purpose of SMB Smart Designs is to:

A. Provides training on products, tools, and solutionsB. Assists in locating appropriate resourcesC. Provides a direct support path for any partner issueD. Provides validated commercial solutions

Answer: D


15/15


Page 15 of 15

Question: 58The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer systemsover packet-switched, variable-latency data networks. NTP also refers to a reference softwareimplementation that is distributed by the NTP Public Services Project. Which of the following are

three functions of the NTP protocol? (Choose three)

A. To connect to a reference source on the InternetB. To install as an Intranet-based applicationC. To aid in the collection of call detail records for billingD. To ensure that all network devices share a common time reference

Answer: A, C, D

Question: 59A Public Switched Telephone Network (PSTN) trunk is typically the voice interconnect betweenany business and the outside world. Which of the following dial plan scenario may require PSTNtrunks for outbound calls?

A. A subset of the employees, the auto attendant or receptionist, and the voice-mail system havedirect inward dial numbers, and the remaining employees do not have direct inward dialnumbers.

B. All the employees, the auto attendant or receptionist, and the voice-mail system have directinward dial numbers using analog trunks.

C. All the employees, the auto attendant or receptionist, and the voice-mail system have directinward dial numbers using digital interfaces.

Answer: C

Question: 60If a customer insists to use a traditional approach to a phone system, which of the followingconfiguration works normally?

A. The SPA3000 telephone adapters with an FXO gatewayB. SPA9000 Service Model with PSTN Service only plus SPA400C. SPA9000 Service Model with VoIP Only serviceD. SPA9000 Service Model with simultaneous VoIP and PSTN services

Answer: B

Question: 61On a network where voice communication is mission-critical to business operation, which Ciscosupport service product targets customers with up to 48 users?

A. Cisco SMARTnet for SBCS

B. Cisco Technical Assistance CenterC. Cisco Smart Care ServiceD. Cisco Smart Foundation ServiceE. SMARTnet Partner Service

Answer: A

End of Document

Documents

650-180 SMB System Engineer