October 2017 WN844NEW-1Prices Ex. GST

October 2017

6 PORT INTELLIGENT USB AC CHARGING STATION - PROLINKINTELLIGENT CHARGING CIRCUIT COMPATIBLE WITH ALL DEVICES

Multiple outlets for charging / powering your USB devices. Outputs total of 51W (10.2 Amps) with 3x high power charging outlets (2.4A) in iPads and tablets and 3x charging outlets (1A) for iPhones and mobiles. It can sense the devices connected to it and automatically adjusts the output to power or charge your device at optimal performance and protection. Your device will charge faster than a non-intelligent charger plus battery cycle life is extended. Multiple safety protection functions, over current protection, over voltage protection, short circuit protection, over temperature protection.

• 6 dedicated USB sockets each with 5V output• 3x 2.4A for iPads and Android tablets • 3x 1A for iPhones, Smartphones , etc.• 51 Watts of power (Over 10A!)• No more searching for available USB ports or adapters.• Fully automatic intelligent charging and powering output• Compatible with any device needing USB power• Fits neatly onto your desktop, hall-table, media station• AC input 100-240V, worldwide travel compatible• AC cord included. Master power switch• Multiple voltage protection functions• Attractive, easily accessible design. 120mmØ

Ports Code Cost 10+3x2.4A + 3x1A LS-6U $19.95 $17.95

Includes 1.8MPower Cord

PRICE REDUCTION

Code Cost 10+PB60-6SW $12.50 $11.25

INDIVIDUALLY SWITCHED

6 WAY POWER BOARD

6 way AC powerboard with surge protection.Individually switched

OEM VSCVI2MPDIRV4Outdoor IP67CCD 1/2.7" 2.0M CMOSTVL 1080pLens 3.6mm fixedFOV 90°Size 94x106Ø mmLUX 0.02 Lux at F2.0IR 50MPower 12VdcCode CAM616Cost $65.005+ $58.50

1080p FIXED HDCVI MINI DOME CAMERA - WATCHGUARD• Streams HD 1080p/2.0MP (1920 x 1080)• Fixed 3.6mm lens; 90° viewing angle• Up to 500m HD video transmission over coax• Infrared illumination up to 50m• IP67 rated for weather resistance• Compact size with adjustable mount• Full metal housing

WatchguardTM

View Datasheet with QR code

Or visit our website from your computer at: www.wes.com.au

October 2017WN844NEW-2 Prices Ex. GST

October 2017

5-1/2" WOOFER ESOTERIC SERIES - DAYTONNEODYMIUM & 3" TITANIUM VOICE COILThe Dayton Audio ES180TiA-8 is a high-tech 7" woofer featuring an FEA-optimized neodymium ring motor structure with dual copper shorting rings for ultra-low distortion. Its enormous 3" edge-wound voice coil on a titanium former provides high power handling and excellent transient response.

OmniMic

20 50 100 200 500 1k 2k 5k 10k 20kFrequency Response -- frequency [Hz]

[dBS

PL]

105 100 95 90 85 80 75 70 65 60 55

• Now with improved frequency response for easier crossover integration

• Dual copper shorting rings in the motor for reduced energy storage

• 3" edgewound voice coil on titanium former provides exceptional transient response

• Woven glass-fiber cone provides excellent stiffness for minimal cone flex

• High excursion suspension design with tethered tinsel leads and fully ventilated frame

• High-power, ultra-low-distortion design

ULTRA LOW DISTORTIONThe Dayton Audio ES180TiA-8 is a high-tech 7" woofer featuring an FEA-optimised neodymium ring motor structure with dual copper shorting rings for ultra-low distortion. Its enormous 3" edge-wound voice coil on a titanium former provides high power handling and excellent transient response.

• Now with improved frequency response for easier crossover integration

• Dual copper shorting rings in the motor for reduced energy storage

• 3" edgewound voice coil on titanium former provides exceptional transient response

• Woven glass-fiber cone provides excellent stiffness for minimal cone flex

• High excursion suspension design with tethered tinsel leads and fully ventilated frame

• High-power, ultra-low-distortion design

7" WOOFER ESOTERIC SERIES 8 OHM DAYTON AUDIO

View Datasheet with QR code

Or visit our website from your computer at: www.wes.com.au

View Datasheet with QR code

Or visit our website from your computer at: www.wes.com.au

OmniMic

20 50 100 200 500 1k 2k 5k 10k 20kFrequency Response -- frequency [Hz]

[dBS

PL]

105 100 95 90 85 80 75 70 65 60 55

Zn 8ΩRe 6.6ΩPower 100WrmsFs 41.7HzSens. 84.2dBQes 0.50Qms 5.84Qts 0.46Vas 9.5LDiam. 152mmØCode ES140TIA-8Cost $179.0010+ $161.10

Zn 8ΩRe 7.4ΩPower 100WrmsFs 33.7HzQes 0.44Qms 4.90Qts 0.40Vas 20.7LDiam. 176mmØCode ES180TIA-8Cost $189.0010+ $170.10

October 2017 WN844NEW-3Prices Ex. GST

October 2017

Dayton Audio's 13 mm DAEX13CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows!A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Its 4-ohm nominal impedance facilitates the use of series and series-parallel wired arrays for a highly focused, minimum dispersion sound pattern.3M VHB (Very High Bond) adhesive is pre-applied. Two PCB solder points keep installation and wiring as compact as possible.

DAYTON SOUND EXCITER 13MM 3W3W 4 OHMS

Impedance 4Ω (Re 3.6Ω)Power 3WrmsSize 9.5x26mmØCode DAEX13CT-4Cost $4.5010+ $4.05

Turn even large, rigid surfaces into speakers with the Dayton Audio DAEX32EP-4 Thruster exciter!

DAYTON SOUND EXCITER 32MM 40W

• Robust, heavy-duty design with a 32 mm voice coil attached to a steel spider

• Pre-applied 3M™ VHB™ adhesive for quick, secure installation

• Rare-earth neodymium motor and a proprietary two-layer voice coil

• 4-ohm impedance for use with small, Class D amplifiers

• 40 watt RMS power handling for high output

View Datasheet with QR code

Or visit our website from your computer at: www.wes.com.au

View Datasheet with QR code

Or visit our website from your computer at: www.wes.com.au

Dayton Audio's DAEX58FP Flat Pack exciter is the perfect choice to turn virtually any solid object into a speaker by vibrating it at speeds of up to 20,000 cycles per second. The DAEX58FP allows for the placement of sound where depth and space is limited.

58MM² FLAT PACK WITH SCREW HOLES

DAYTON SOUND EXCITER 58MM 25W

• Super small size with low profile height• 8 ohms impedance for use in almost any amplifier• Includes mounting plate• Adds sound to any surface

View Datasheet with QR code

Or visit our website from your computer at: www.wes.com.au

Ø15.7±0.3m

m

Ø26.3±0.3m

m

32±0.3mm

9.5±0.5mm

Impedance 4ΩPower 40WrmsSize 42mmØ x 23mmCode DAEX32EP-4Cost $29.5010+ $26.55

Freq. 60Hz - 12KHzImpedance 8ΩPower 25WrmsSize 20x58mm²Code DAEX58FPCost $17.1510+ $15.45

October 2017WN844NEW-4 Prices Ex. GST

October 2017

Colour Length Code Cost 10+Blue 0.5M CL390BU $1.27 $1.14Blue 1M CL392BU $1.48 $1.33Blue 2M CL394BU $2.17 $1.95Blue 3M CL396BU $2.95 $2.65Black 0.5M CL390BK $1.27 $1.14Black 1M CL392BK $1.48 $1.33Black 2M CL394BK $2.17 $1.95Black 3M CL396BK $2.95 $2.65

Ultra thin cables ideal for high density patch panel use. Cuts down on the bulk whilst maintaining Category 6 gigabit performance. 8 Pin RJ45 Male to 8 Pin RJ45 Male. Backwards compatible with Cat5/Cat5e.

CAT6 ULTRA THIN ETHERNET PATCH CABLEONLY 3.5MM IN DIAMETER

• Ulta thin diameter: 3.5mm• 100% copper conductors• T568A configuration• Fitted with Category 6 compliant RJ plug• Fully moulded strain-relief boot• Snagless flush moulded boots• ISO/IEC 11801 Category 6• TIA/EIA-568-C.2 Category 6 compliant

Ordinary CAT6 Patch Cable

Ultra Thin CAT6 Patch Cable

TypeWith N-F connector With N-F connector +

10M LL195/LMR200 cable (N-M to FME-F)

Freq. 700-2700MHzPower 100WmaxGain 11dBiMounting 40-50mm mastCode ANT701 ANT703Cost $85.00 $107.005+ $76.50 $96.30

Covers all mobiles bands including Wifi

DIRECTIONAL ANTENNA 700-2700MHZ

ANT703 includes 10M cable to FME-F connector

Code Cost 10+NF400PT $13.75 $12.37

PoE TESTER

NF-400PF is a 802.3af/802.at PoE (Power over Ethernet) tester is an easy-to-use PoE adapter for professionals to determine the existence of PoE. It can be used to determine if power and data are present in a live ethernet cable. Simply plug the cable to the RJ45 connector.

Code Cost 10+NF633 $39.50 $35.55

NF-633 DisplayPort cable tester checks the internal wires individually and then displays the result at the LED panel.Supports DisplayPort and mini DisplayPort cablesMax testing distance: 15mRequires 9V battery

DISPLAYPORT CABLE TESTER

Pack of Code Cost 10+10 TSLR6BP10 $3.90 $3.51

10x AA batteriesHigh surge current.Long shelf lifeNo mercury or cadmium

TOSHIBA ALKALINE "AA" 10 PACKBLISTER PACK

Pack of Code Cost 10+10 TSLR3BP10 $3.90 $3.51

BLISTER PACK

10x AAA batteriesHigh surge current.Long shelf lifeNo mercury or cadmium

TOSHIBA ALKALINE "AAA" 10 PACK

View Datasheet with QR code

Or visit our website from your computer at: www.wes.com.au

October 2017 WN844NEW-5Prices Ex. GST

October 2017

Code CostMB1015 $9.76

HEIGHT38mm

Outdoor mounting box for security camera with opening on 2 sides to connect to a conduit. Size: 135x105x38mm

MOUNTING BASE – UNIVERSAL

Code CostAPV89309 $5.90

Black leather case.Suitable for iPOD Video 30GB and 60GB version.

LEATHER CASE FOR iPOD VIDEO

RCA PANEL MOUNT NEUTRIK

Collar Code Cost 10+White NF2D-B9 $7.50 $6.73 eachRed NF2D-B2 $7.05 $6.34 each

BLACK BEZEL VERSION

Code Cost 5+LY-SB10 $2.95 $2.66

WITH RING TERMINALS

EARTH CABLE LEAD 35CM

35cm earth cable with ring terminals on both ends (O.D.: 11mmØ, I.D. 6mmØ)

Length Width Height Code Cost 10+120 91 62 1555F2F42GY $17.90 $16.11

HAMMOND 1555 FLANGE MOUNTIP67 POLYCARBONATE

1555 is a family of rugged IP67 sealed units designed for wall or chassis mounting PCB-based or DIN-rail based equipment in harsh industrial environments or outdoor applications.Polycarbonate. Rubber grommet sealed lid. Stainless steel fittings. Optional internal mounting plate.

OPTIONAL◄ PLATE

Code CostSV620 $21.36

VIDEO TAPE SPLICER KITDefeats all hassles with repairing and modifying video cassette tapes. This handy unit has clips for holding the door open and releasing the reel ratchet. A grooved plate allows easy alignment of the tape with ‘fingers’ to hold it in position. Also includes a guillotine blade for accurate & neat splicing of the video tape. Suitable for both VHS & BETA tapes. Comes with instructions and splice tabs. Edit and repair is easy now.

Code CostMK32 $3.86 (for 90)

Splice tabs for ½" video tape. Order one to receive a packet of 90.

REPLACEMENT TABS

MK32

Code CostEL303E $34.50

CASSETTE ADAPTOR VHS-CAdapts the compact camcorder cassette to the normal size. VHS-C Cassettes ONLY! S-VHS Compatible [ NOT 8mm/Hi-8 ] REQUIRES “AA” BATTERY

Code CostPC8101 $4.50

Repair or modify VHS or BETA tapes with this splicing jig for precise control of cut & pasting. Includes jig, press, blade,adhesive tape and VHS & BETA leader tapes.

VIDEO SPLICE KIT

Code CostHL-201 $5.75

Non-Abrasive polyester to clean the entire tape path. Includes cleaning solution. Note this tape does not have a leader tape and may not function as expected in some machines.

HEAD CLEANER VHS

EXTRA CLEANING SOLUTION

Code CostCS500 $1.50

Standard size wall plates with RCA sockets.Size: 115x70x20mmScrews and screw hole plugs are included

RCA WALL PLATES

Connectors Code Cost 10+2x RCA sockets WP22 $2.55 $2.324x RCA sockets WP24 $3.14 $2.82