Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
xxx ISBN: 978-1-61738-613-8
51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2010
Orlando, Florida, USA 12-15 April 2010
Volume 1 of 10
The contents of this work are copyrighted and additional reproduction in whole or in part are expressly prohibited without the prior written permission of the Publisher or copyright holder. The resale of the entire proceeding as received from CURRAN is permitted. For reprint permission, please contact AIAA’s Business Manager, Technical Papers. Contact by phone at 703-264-7500; fax at 703-264-7551 or by mail at 1801 Alexander Bell Drive, Reston, VA 20191, USA.
Printed from e-media with permission by:
Curran Associates, Inc. 57 Morehouse Lane
Red Hook, NY 12571
Some format issues inherent in the e-media version may also appear in this print version.
TABLE OF CONTENTS
VOLUME 1
Large and High Precision Inflatable Membrane Reflector ................................................................................................ 1J. Pearson Jr., J. Moore, H. Fang
A Shape Deformation Study of Large Aperture Inflatable Elastic Parabolic Antenna Reflectors ............................... 13M. Coleman, F. Baginski
Thermal Deformation and RF Performance Analyses for the SWOT Large Deployable Ka-Band Reflectarray.......................................................................................................................................................................... 24
H. Fang, E. Sunada, M. Chaubell, D. Esteban-Fernandez, M. Thomson, F. Nicaise
Investigation of Thermal Distortion of The Twenty Five-Meter Inflatable Reflect Antenna........................................ 36H. Sun, X. Du, H. Tan, G. Lin
Large Shell-Membrane Space Reflectors........................................................................................................................... 43L. Datashvili, H. Baier, E. Wehrle, T. Kuhn, J. Hoffmann
Wrinkle-Crease Interaction Simulation Using Combined MT Model and DP Technique ............................................ 51C. Wang, H. Tan, X. He
Analysis of Wrinkling Behavior in Thin Sheets with Damage ......................................................................................... 63K. Woo, C. Jenkins
Post-Buckling Behavior of Thin Corrugated Panels with Application to Gossamer Space Structures........................ 77R. Fellini, Y. Kropp
Prediction of Wrinkle Intensity in Membrane Structures Using Membrane Theory .................................................... 88X. Wang, V. Oncescu, Y. Hu, W. Zheng, Y-R. Hu, J. Shan
Resource Allocation Using Quantification of Margins and Uncertainty....................................................................... 104A. Urbina, S. Mahadevan, T. Paez
Data and Model Conditioning related to Systematic Uncertainties in Model Calibration, Validation, and Extrapolation .............................................................................................................................................................. 118
V. Romero
Quantification of Multiple Types of Uncertainty in Computer Simulation Using Bayesian Model Averaging ........................................................................................................................................................................... 159
I. Park, R. Grandhi
Demonstrating the Improvement of Predictive Maturity of a Computational Model ................................................. 171F. Hemez, S. Atamturktur, C. Unal
Evolving Desiderata for Validating Engineered-Physics Systems Without Full-Scale Testing ................................... 185J. Langenbrunner, J. Booker, T. Ross, F. Hemez
Determination of Probability Density Functions of the Cohesive Zone Model Parameters ........................................ 199V. Shanmugam, R. Penmetsa, E. Tuegel
Identification of Critical Sequences of Fatigue-Induced Failures by Branch-and-Bound Method Employing System Reliability Bounds ............................................................................................................................. 210
Y. Lee, J. Song
Fatigue Crack Growth Analysis Under Uncertainty ...................................................................................................... 223S. Sankararaman, Y. Ling, C. Shantz, S. Mahadevan
Efficient Methods for Probabilistic Damage Tolerance Inspection Optimization........................................................ 230J. Wu, J. Zhao, M. Shiao, H. Millwater
Regression Uncertainty Quantification Using Bootstrap Method for Residual Stress Field Predictions ................... 243H. Amarchinta, T. Tarpey, R. Grandhi
A Comparison of Triaxially-Braided Composites Using the Generalized Method of Cells......................................... 257J. Hutchins, K. Liu, T. Lacy Jr., B. Bednarcyk
Examination of Material and Architectural Effects at Various Length Scales on the Structural Deformation Response Determined Via Multiscale Generalize Method of Cells ......................................................... 267
K. Liu, S. Arnold, A. Chattopadhyay
Investigation of a Macromechanical Approach to Analyzing Triaxially-Braided Polymer Composites .................... 289R. Goldberg, B. Blinzler, W. Binienda
Computational Micromechanics Analysis of the Effects of Bundle Packing and Interphase Addition on the Effective Electrical and Thermal Transverse Conductivity of Carbon Nanotube-Ploymer Nanocomposites ................................................................................................................................................................. 315
A-S. Puydupin-Jamin, G. Seidel
Micro-Structural Modeling of 2-D Plain Woven Textile Composites............................................................................ 332H. Hur, J. Park, R. Kapania
Impact Damage Assessment in CFRP Composites Using 1-D Electrical Resistance Technique ................................. 372J. McAndrew, O. Zhupanska
Visualization of Impact Damage in Composite Structures Using Pulsed Laser Scanning Method ............................ 382N. Takeda, I. Takahashi, Y. Ito
A Ritz Approach for Buckling Prediction of Cracked-Stiffened Structures ................................................................ 390T. Dang, R. Kapania
Buckling Imperfection Sensitivity of Axially Compressed Orthotropic Cylinders ...................................................... 412M. Schultz, M. Nemeth
Comparison of Methods to Predict Lower Bound Buckling Loads of Cylinders Under Axial Compression....................................................................................................................................................................... 432
W. Haynie, M. Hilburger
Probabilistic Second-Order Third-Moment Approach for Design of Axially Compressed Composite Shells ................................................................................................................................................................................... 454
B. Kriegesmann, R. Rolfes, C. Huhne, A. Kling
Extended Finite Element Methods-Based Two-Parameter Fatigue Crack Growth Prediction .................................. 462M. Duflot, K. Ni, P. Hu
Reanalysis of XFEM for Crack Initiation and Propagation .......................................................................................... 471M. Pais, N. Kim, T. Davis
Enhanced XFA3D for Fatigue Crack Growth and Life Prediction in Aluminum Structures..................................... 487J. Shi, J. Lua, N. Thammadi, D. Chopp
Life Prediction of Aerospace Structures by Combined XFEM and Advanced Fatigue Models ................................. 507J. Lua, J. Shi, Z. Lu, Y. Liu
Comparison of XFEM, CZM and PD for Predicting Crack Initiation and Propagation ............................................ 526A. Agwai, I. Guven, E. Madenci
The Impact of Flow Induced Loads on Snap-Through Behavior of Acoustically Excited, Thermally Buckled Panels ................................................................................................................................................................... 538
B. Miller, J. McNamara, A. Culler, S. Spottswood
Minimization of Acoustic Radiation from a Turbulent Boundary Layer Excited Panel with Curvilinear Stiffeners ........................................................................................................................................................ 561
P. Joshi, S. Mulani, W. Slemp, R. Kapania
Coupling Acoustic Modal Models to Nonlinear Structural Reduced-Order Models ................................................... 589J. Hollkamp, R. Gordon
Analysis of Nonlinear Structures and Acoustics Coupling Finite and Boundary Element Methods .......................... 601J. Dhainaut
Coupling Acoustics to Nonlinear Structural Models: Predictions and Experiments ................................................... 613J. Hollkamp, R. Gordon, T. Bebemiss
Rigorous Joining of Advanced Reduced-Dimensional Beam Models to 2-D Finite Element Models ......................... 623H. Song, D. Hodges
Investigating the Effects of Orthogonalization of Measured Modes on Finite Element Model Tuning...................... 641E. Swenson, J. Black, R. Cobb
Nonlinear Finite Element Analysis of a Rotating MFC Actuator.................................................................................. 653M. Azzouz, C. Hall
Aeroelastic Applications of a Panel-Model-Based Overset Euler Solver to a Twin-Engine Transport Flutter Model ..................................................................................................................................................................... 667
P. Chen, Z. Zhang, A. Sengupta
Flutter of a Stabilator with a Snag Leading Edge........................................................................................................... 682R. Yurkovich
Influence of Aero-Viscoelastic Chordwise Bending and Unsymmetric Lifting Surface Bending and Twisting on Torsional Divergence and Flutter................................................................................................................ 696
C. Merrett, H. Hilton
Time Series Analysis and Identication of a Nonlinear Aeroelastic Section................................................................... 711R. Vasconcellos, F. Marques, M. Hajj
Aeroelastic Identification of Flying UAVs by Output-Only Data with Applications on Vibrations Passive Control .................................................................................................................................................................. 726
F. Mastroddi, G. Coppotelli, A. Cantella
Time-Domain Nonlinear System Identification Method Based on Empirical Slow-Flow Analysis ............................ 743Y. Lee, A. Vakakis, D. McFarland, L. Bergman
Mistuning Identification of Blisks at Higher Frequencies .............................................................................................. 756A. Madden, M. Castanier, B. Epureanu
Hierarchical Strategies of Optimization for Structural System Identification Based on the Condensation Method ....................................................................................................................................................... 766
S. Chang, S. Baek, M. Cho
An Overview of Innovative Strategies for Fracture Mechanics at NASA Langley Research Center ......................... 774J. Ransom, E. Glaessgen, G. Ratcliffe
A Simple Method for Determining Stress Intensity Factors in Bi-Material Interfacial Cracks ................................. 807Y. Morioka, C. Sun
Development of Multifunctional, Toughened Carbon Fiber-Reinforced Composites ................................................. 815M. Palmeri, K. Putz, T. Ramanathan, T. Tsotsis, L. Brinson
Strain-Rate Effect on Tensile and Fracture Behaviors of Phenylethynyl Terminated Imide Oligomer-5 (PETI-5).............................................................................................................................................................................. 824
D. Lee, H. Tippur
Performance of Clays, Carbon Nanofibers, Multi-Walled Carbon Nanotubes, and Nano-Alumina in Polyamide 11 Nanocomposites.......................................................................................................................................... 831
J. Koo, S. Lao, J. Lee, C. Lam, J. Lee, T. Moon, L. Pilato, G. Wissler
Thermal and Electrical Transport in Hybrid Woven Composites Reinforced with Aligned Carbon Nantoubes ........................................................................................................................................................................... 848
N. Yamamoto, R. Guzman de Villoria, H. Cebeci, B. Wardle
Mechanical Properties of Infusion-Processed Fiber Reinforced Plastics with In Situ-Grown Aligned Carbon Nanotubes ............................................................................................................................................................. 858
S. Wicks, K. Ishiguro, R. Guzman de Villoria, B. Wardle
Update on the Joint Aircraft Survivability Program (JASP)......................................................................................... 867M. Weisenbach
Enhancing Human Spaceflight Safety Through Spacecraft Survivability Engineering .............................................. 879M. Buchanan, M. Saemisch
Designing Power System Topologies of Enhanced Survivability ................................................................................... 886S. Poroseva
Ballistic Impact Flash Characterization .......................................................................................................................... 894J. Bestard, B. Kocher
VOLUME 2
An Evaluation of Wind Turbine Blade Cross Section Analysis Techniques ................................................................. 900
B. Resor, J. Paquette, D. Laird, D. Griffith
Passive Load Control for Large Wind Turbines............................................................................................................. 916T. Ashwill
New Structural Design for Large Wind Turbine Blades Using Structural Optimization Techniques ....................... 928L. Forcier, S. Joncas
FEM Analyses for Wrapping Fold Model of Membrane Retracted by Guided-Pin Mechanisms .............................. 945Y. Satou, H. Furuya
Simulation and Experiment for Inflatable Control Deployment of Rolled Booms....................................................... 958J. Wei, H. Tan, H. Sun, X. Du
Analysis of a Segmented Compliant Deployable Boom for CubeSat Magnetometer Missions ................................... 969A. Sim, M. Santer
Mathematical Formulation for Deployment Dynamics of Shape Memory Polymer Composite Space Structures ........................................................................................................................................................................... 983
B. Yang, G. Davis, H. Fang
Numerical Simulations of Centrifugal Deployments of Membranes by Spring-Mass System Models ....................... 990N. Okuizumi
Verification of a Retractable Solar Sail in a Thermal-Vacuum Environment.............................................................. 999J. Banik, E. Ardelean
Mechanical Design of a Kilometer-Sized Solar Sail ...................................................................................................... 1010M. Brown
Global Sensitivity Analysis for Stochastic Collocation ................................................................................................ 1024G. Tang, G. Iaccarino, L. Swiler, M. Eldred
Efficient Bayesian Reliability Analysis and Design with a User-Defined Confidence Level...................................... 1037P. Wang, B. Youn
Maximum Entropy Method for Model and Reliability Updating Using Inspection Data ......................................... 1052X. Guan, R. Jha, Y. Liu
Selecting Cluster-Weighted Models for Sensitivity Analysis........................................................................................ 1059C. Pettit, D. Wilson
Least Square-Based Bayesian Updating for Remaining Useful Life Estimation ........................................................ 1076A. Coppe, R. Haftka, N. Kim
Integrated Bayesian Reliability Analysis Under Input Variable and Metamodel Uncertainties .............................. 1090D. An, J. Choi, J. Won
Reliability-Based Structural Design of Aircraft Together with Future Tests............................................................. 1104E. Acar, R. Haftka, N. Kim, M. Turina, C. Park
Classification Approach for Reliability-Based Topology Optimization using Probabilistic Neural Networks........................................................................................................................................................................... 1130
J. Patel, S. Choi
Including Future Tests in the Design and Optimization of an Integrated Thermal Protection System ................... 1145D. Villanueva, R. Haftka, B. Sankar
Anisotropic Dimension-Adaptive Tensor Product Method for Reliability Analysis .................................................. 1159C. Hu, B. Youn
Loading Magnitude Uncertainty in Level-Set Based Topology Optimization ............................................................ 1178P. Dunning, H. Kim, G. Mullineux
Bending Test of a Variable-Stiffness Fiber Reinforced Composite Cylinder ............................................................. 1185A. Blom, P. Stickler, M. Rassaian, Z. Gurdal
Analysis of Composite and Sandwich Beams Using Adaptive, Variable-Order NURBS Element-Free Galerkin Formulation ..................................................................................................................................................... 1206
H. Kapoor, R. Kapania
Adhesive Failure in Hybrid Double Cantilever Beams by Digital Image Correlation ............................................... 1229K. Colavito, E. Madenci
Estimation of Porosity in Composite Structures Using Modified Spectral Finite Element Approach ..................... 1241V. Ajith, S. Gopalakrishnan
Shape Accuracy of a Joint-Dominated Deployable Mast ............................................................................................. 1249O. Stohlman, S. Pellegrino
Shape Recovery of Viscoelastic Deployable Structures ................................................................................................ 1264K. Kwok, S. Pellegrino
Finite Element Analysis of Cable-Truss Structures ...................................................................................................... 1281L. Liao, B. Du
Design Developments of a Non-Planar Deployable Structure...................................................................................... 1293J. Footdale, J. Banik, T. Murphey
Development of Deployable Apertures for CubeSats ................................................................................................... 1303J. Garrett, L. Stiles, T. Murphey, H. Dumm, J. Banik
Snap-Through Instability Patterns in Truss Structures............................................................................................... 1313G. Hrinda
Simulation of Crushing Process in Composite Tubes ................................................................................................... 1325A. Najafi, D. Huang, M. Rais-Rohani, F. Abdi, C. Heydari
Elastic Buckling of Thin-Walled Structural Components with Edge-Stiffened Holes ............................................... 1333C. Moen, C. Yu
Eliminating End Effects for Theoretical Panel Buckling ............................................................................................. 1343P. Fenner, A. Watson
Axial Crushing Tests of Steel Thin-Walled Square Tubes with Pyramid Patterns.................................................... 1360J. Ma, Y. Le, Z. You
The Influence of Cohesive Zone Modeling on the Stress Field and Energy Release Rates in a Cracked Body .................................................................................................................................................................................. 1370
P. Prabhakar, A. Waas
Predictions of Delamination of a Stiffened Panel Using a Cohesive Zone Model ....................................................... 1387P. Gustafson, A. Waas
A Coupled Cohesive and XFEM for 3-D Delamination Onset and Growth Prediction............................................. 1408J. Shi, J. Lua, Q. Yang, X. Fang
Modeling Progressive Damage Using Local Displacement Discontinuities within the FEAMAC Multiscale Modeling Framework ................................................................................................................................... 1430
V. Ranatunga, B. Bednarcyk, S. Arnold
Composite Damage Assessment and Repair Evaluation Toolkit for Aerospace Structures...................................... 1443J. Lua, J. Wei, X. Li, P. Liu
Active Flutter Suppression of the Supersonic Semispan Transport (S4T) Model...................................................... 1458K. Roughen, O. Bendiksen
Modeling and Control of Generic Transport Model..................................................................................................... 1471I. Tuzcu, N. Nguyen
CFD-Based Control for Flutter Suppression, Gust Load Alleviation, and Ride Quality Enhancement for the S4T Model............................................................................................................................................................. 1483
B. Moulin, E. Ritz, P. Chen, D. Lee, Z. Zhang
Design of Active Control Law for Aeroelastic System Based on Proper Orthogonal Decomposition Reduced Order Model ..................................................................................................................................................... 1511
G. Chen, Y. Li, P. Hu
Robust Control of Rotating Composite Thin-Walled Beam......................................................................................... 1520B. Lee, J. Choo, S. Na, P. Marzocca
Concurrent Structural Fatigue Prognosis Under Random Loading ........................................................................... 1540J. He, Z. Lu, Y. Liu
Time Reversibility of Lamb Wave for Damage Detection in Isotropic Plate .............................................................. 1548A. Tiwari, G. Kulkarni, B. Poddar, M. Mitra, P. Mujumdar
Damage Localization for Structural Health Monitoring Using Retrospective Cost Model Refinement .................. 1562A. D'Amato, A. Wu, K. Mitchell, S. Kukreja, D. Bernstein
A Damage Localization Method For Timoshenko And Euler Bernoulli Beams......................................................... 1579A. Dixit, S. Hanagud
Damping Variations in Post-Buckled Structures Having Geometric Imperfections.................................................. 1588J. Kosmatka
Efficient Prediction of Aeroelastic Response Including Geometric Non-Linearities ................................................. 1595Y. Harmin, J. Cooper
F-16 Fighter Aeroelastic Computations Using a Harmonic Balance Implementation of the OVERFLOW 2 Flow Solver ........................................................................................................................................... 1608
J. Thomas, C. Custer, E. Dowell, K. Hall
Fluid-Structure Reaction Study of an F-16 Limit Cycle Oscillation Case with Stores .............................................. 1617C. Pasiliao, J. Dubben
Limit Cycle Oscillations of Plate-Type Fins Using Increased-Order Models ............................................................. 1630D. Levin, M. Karpel
Reduction of LCO Sensitivities of the F-16 by Wing Modification.............................................................................. 1642B. Prananta, M. Hounjet, B. Eussen
Static Aeroelastic Analysis of a Supersonic Flight Vehicle with a Ramjet Engine ..................................................... 1659J. Kwak, S. Shin, W. Hong, J. Yim, C. Kim, I. Lee
Analytical Failure Criteria of an Inflated Wing............................................................................................................ 1672Y. Gal-Rom, D. Raveh
Eigen Reanalysis of Structures Using Dynamic Flexibility Method ............................................................................ 1687D. Zhang, J. Wang, F. Wei
Advanced Time-Frequency Analysis for Characterization of Nonlinear Structural Vibrations .............................. 1697P. Pai, A. Palazotto, G. Wu
An Efficient Dynamic Re-Analysis of Aerospace Structures Using Combined Approximation Techique Through MATLAB Simulation...................................................................................................................... 1718
H. Afifi, E. Nikolaidis, E. Afifi, S. Gangadharan
Methods for Growing Carbon Nanotubes on Carbon Fibers that Preserve Fiber Tensile Strength ........................ 1742S. Steiner, R. Li, M. Tsai, K. Ishiguro, R. Guzman de Villoria, B. Wardle
VOLUME 3
Mechanical Characterization of Nanosilica/Epoxy Nanocomposites........................................................................... 1755
G. Swaminathan, M. Hossain, K. Shivakumar
An Investigation on Graphene-Based Hybrid Nanocomposites Under Bending Loadings ....................................... 1762A. Avila, M. Carvalho, A. Van Petten
Material Properties Estimation Using Classical Micromechanics and Generalized Method of Cells ...................... 1771J. Yu, T. Lacy Jr., H. Toghiani, C. Pittman Jr.
Hypervelocity Impact Testing of IM7/977-3 with Micron-Sized Particles .................................................................. 1779J. Smith, D. Jegley, E. Siochi, B. Wells
Study of Over-Current Protection, Electric Arcing, and Fire Prevention .................................................................. 1806C. McCabe, D. Cyphers
Evaluation of Shear Thickening Fluid Kevlar for Large Fragment Containment Applications .............................. 1826R. Rabb, E. Fahrenthold
Using Focused Acoustic Excitation to Accelerate Crack Healing ................................................................................ 1832B. Fehrman, E. Petersen, K. Barnes, U. Korde
Simulation of Inflow Velocity Fields and Wind Turbine Loads during Thunderstorm Downbursts ....................... 1846H. Nguyen, L. Manuel, P. Veers
Real-Time Aerodynamic Observable for Wind Turbine Applications ....................................................................... 1863A. Mangalam, G. Moore, D. Berg, M. Blaylock, M. Rumsey
Wind Tunnel Tests to Modify a Drag-Type Vertical Axis Wind Turbine .................................................................. 1872W. Vallone, I. Guven, E. Madenci
The Influence of Wake Effects and Inflow Turbulence on Wind Turbine Loads ...................................................... 1885K. Kecskemety, J. McNamara
Icing Effect on the Aerodynamics of Wind Turbines: Numerical Study Using Large-Eddy Simulation ................. 1905M. Ilie
A Unified Material Model for Smart Materials ............................................................................................................ 1918W. Oates, R. Sierakowski
Energy Release Rate of Dielectric Materials with Evolving Defects Under Electric Field ........................................ 1931Y. Chen, R. Sierakowski
Lightweight Long Nanotube/Solid Electrolyte Composite Actuators for Morphing Structure Applications: Fabrication and Property Characterization .......................................................................................... 1937
S. Tsai, I. Chen, D. Labrador, S. Porter, Z. Liang, B. Wang, C. Zhang
Analysis of Magnetically Actuated Structures Using Implicit Boundary Finite Element Method ........................... 1943A. Kumar, S. Zhang
Synthesis and Characterization of Multifunctional Nanocomposites of Toughened Epoxy Reinforced with Carbon Nanotubes .................................................................................................................................................. 1954
D. Lagoudas, P. Thakre, P. Klein
Piezoelectric Wafer Active Sensors for Structural Health Monitoring of Composite Structures ............................. 1962V. Giurgiutiu, G. Santoni-Bottai
Fatigue Life Testing of Swaged Pneumatic Artificial Muscles for Aerospace Morphing Applications.................... 1988B. Woods, M. Gentry, C. Kothera, N. Wereley
Tunable Modulus Structures utilizing Fluidic Flexible Matrix Composites: Analytical and Experimental Investigations ........................................................................................................................................... 1999
M. Philen
Pressure Adaptive Honeycomb: Mechanics, Modeling, and Experimental Investigation ......................................... 2010R. Vos, R. Barrett
Thermally-Activated Reconfigurable Wing Design Using a Non-Monolithic Compliant Mechanism ..................... 2024J. Joo, D. Robertson, G. Reich, B. Smyers
Trajectory Diversion of an Earth-Threatening Asteroid via Massive, Elastic Tether-Ballast System ..................... 2037D. French, A. Mazzoleni
Estimating the Deployment Pressure in Pumpkin Balloons......................................................................................... 2071F. Baginski, K. Brakke
Wrinkling of Orthotropic Viscoelastic Membranes...................................................................................................... 2092X. Deng, S. Pellegrino
Buckling and Post-Buckling of a Pumpkin Balloon ...................................................................................................... 2115Y. Xu, M. Chen, W. Chen
Design of Axially Crushing Thin-Walled Square Tubes Using Compliant Mechanism Approach .......................... 2132P. Bandi, C. Mozumder, A. Tovar, J. Renaud
Supersonic Wing Box Weight Optimization Using Curvilinear Spars and Ribs (SpaRibs) ...................................... 2147D. Locatelli, S. Mulani, R. Kapania
Algorithm Development for Optimization of Arbitrary Geometry Panels Using Curvilinear Stiffeners ...................................................................................................................................................... 2171
S. Mulani, D. Locatelli, R. Kapania
Analysis and Optimization of Externally Stiffened Crush Tubes ................................................................................ 2188S. Salehghaffari, M. Rais-Rohani, A. Najafi
HCA Approach to Topography Design Optimization of a Structure for Fluid Structure Interaction..................... 2204H. Tan, J. Goetz, A. Tovar, J. Renaud
Effects of Uncertainty Reduction Measures by Structural Health Monitoring on Safety and Lifecycle Costs of Aircrafts ............................................................................................................................................................. 2221
S. Pattabhiraman, N. Kim, R. Haftka
Uncertainty Quantification in Flight Plans Using Evidence Theory: Departure and Arrival Times ....................... 2232S. Poroseva, Y. He, M. Hussaini, J. Pesce, R. Mankbadi
Quantification of Modeling Uncertainty in Aeroelastic Design ................................................................................... 2240M. Riley, R. Grandhi, R. Kolonay
Probabilistic Risk Assessment for Small Airplanes ...................................................................................................... 2261J. Ocampo, H. Millwater, H. Smith, E. Meyer, M. Nuss, M. Reyer, F. Abail, M. Shiao
Sensitivity Analysis of Markov Chain Monte Carlo ..................................................................................................... 2273H. Millwater, E. Vazquez, J. Wu, M. Shiao
Inverse FORM Method for Probabilistic Fatigue Prognosis ....................................................................................... 2295Y. Xiang, Y. Liu
Bayesian Approach for Fatigue Life Prediction from Field Inspection ...................................................................... 2305D. An, J. Choi, S. Pattabhiraman, N. Kim
A Bayesian-Updating Computational Method for Probabilistic Damage Tolerance Analysis.................................. 2319J. Wu, M. Shiao, H. Millwater
Homogenization of Integrated Thermal Protection System with Rigid Insulation Bars ........................................... 2328B. Ravishankar, B. Sankar, R. Haftka
Space Shuttle Wing-Leading-Edge Panel Thermo-Mechanical Analysis for Entry Conditions ............................... 2340N. Knight Jr., K. Song, I. Raju, D. Phillips
Fracture Mechanics Analyses of Reinforced Carbon-Carbon Wing-Leading-Edge Panels...................................... 2349I. Raju, D. Phillips, N. Knight Jr.
Effect of Core Termination Features on Failure Modes in Sandwich Panels by Using Peridynamic Theory............................................................................................................................................................................... 2360
E. Oterkus, I. Guven, E. Madenci
Application of Discrete Damage Modeling to Laminated Composite Overheight Compact Tension Specimens ......................................................................................................................................................................... 2371
D. Mollenhauer, E. Iarve, S. Hallet, S. Putthanarat, X. Li
An Efficient Semi-Analytical Framework for Micromechanical Modeling of Transverse Cracks in Fiber-reinforced Composites .......................................................................................................................................... 2383
E. Pineda, A. Waas, B. Bednarcyk, C. Collier
An Explicit Multiscale Model for Progressive Failure and Damage Detection in Complex Composite Structures ......................................................................................................................................................................... 2396
A. Moncada, A. Chattopadhyay, B. Bednarcyk, S. Arnold
Assessment of the Damage Tolerance of Post-Buckled Hat-Stiffened Panels using Single Stringer Specimens ......................................................................................................................................................................... 2411
C. Bisagni, R. Vescovini, C. Davila
Large Strain Behavior of Thin Unidirectional Composite Flexures............................................................................ 2422G. Sanford, A. Biskner, T. Murphey
Dynamic Modeling of the Folding of Multi-Shell Flexible Composites ....................................................................... 2437M. Silver, P. Warren
Analysis of Fiber Micro-buckling in Elastomeric Composites ..................................................................................... 2448D. Robbins
Mechanical Characterization of L'Garde Elastomeric Resin Composite Materials .................................................. 2464J. Mejia-Ariza, K. Guidanean, A. Biskner, T. Murphey
(Aero)Elasticity and (Aero-)Viscoelasticity: A Critical Appreciation of Similarities and Differences ..................... 2475H. Hilton
Improvement of Axial Buckling Capacity of Elliptical Lattice Cylinders .................................................................. 2519M. Paschero, M. Hyer
A New Design of Composite Patch Repair for Composite Structures ......................................................................... 2546H. Roh, C. Sun
The Challenge of Achieving Hygrothermal Stability in Aerospace Composite Structures ....................................... 2554E. Armanios, R. Haynes
Homogenization of Plates with Microstructure and Application to Corrugated Core Sandwich Panels................. 2560A. Sharma, B. Sankar, R. Haftka
Approximate Aeroelastic Modeling of Flapping Wings: Comparisions with CFD and Experimental Data................................................................................................................................................................................... 2580
P. Friedmann, A. Gogulapati, E. Kheng, W. Shyy
VOLUME 4
Frequency Response of a MAV Wing Flapping Mechanism to Non-Harmonic Forcing........................................... 2609
M. Anderson, R. Cobb
Experimental Methodology for Flapping Wing Structure Optimization in Hovering Flight of Micro Air Vehicles ...................................................................................................................................................................... 2624
P. Wu, P. Ifju
Experimental and Finite Element Modal Analysis of a Pliant Membrane for Micro Air Vehicles Wings ................................................................................................................................................................................ 2641
R. Albertani, U. Chakravarthy
Fluid and Structural Dynamic Response of Membrane Micro Air Vehicles atModerate to High Angle of Attack ........................................................................................................................................................................... 2656
P. Attar, W. Romberg, J. Johnston, R. Gordnier, R. Parthasarathy
Numerical Simulation of an Airfoil with a Flexible Trailing Edge in Unsteady Flow................................................ 2671B. Lambie, A. Krenik, C. Tropea
A Flexible Wing with Conformal Control Surfaces for Optimum Trim of a Tailless Air Vehicle............................ 2680J. Xie, Z. Yang, S. Guo
X-HALE: A Very Flexible UAV for Nonlinear Aeroelastic Tests................................................................................ 2697C. Cesnik, P. Senatore, W. Su, E. Atkins, C. Shearer, N. Pitcher
Shunted Piezoelectric Vibration Damping Analysis Including Centrifugal Loading Effects .................................... 2720J. Min, K. Duffy, A. Provenza
Parametric Study of Joined-Wing Aircraft Geometry ................................................................................................. 2737Z. Sotoudeh, D. Hodges
Primary Modeling and Analysis of Wing Based on Aeroelastic Optimization ........................................................... 2756D. Liu, Z. Wan, C. Yang, T. Yang
ZEUS-DO: Design Oriented CFD-Based Unsteady Aerodynamics for Flight Vehicle Shape Optimization .................................................................................................................................................................... 2765
P. Chen, Z. Zhang, E. Livne
Robust Structural Design Optimization of Flexible Backswept Wings ....................................................................... 2795X. Zhipeng, W. Zhiqiang, Y. Chao
A Reduced Order Nonlinear Aeroelastic Analysis of Joined Wings Based on the Proper Orthogonal Decomposition .................................................................................................................................................................. 2804
L. Demasi, A. Palacios
High Efficient Numerical Method for Limit Cycle Oscillation Analysis Based on Nonlinear Aerodynamic Reduced Order Model ............................................................................................................................. 2830
W. Zhang, B. Wang, Z. Ye
Steady and Unsteady Nonlinear Thermoelastodynamic Response of Isotropic and FGM Panels by Reduced Order Models ................................................................................................................................................... 2845
R. Perez, X. Wang, M. Mignolet
Reduced Order Modeling of Transonic Flutter and Limit Cycle Oscillations Using the Pruned Volterra Series ................................................................................................................................................................. 2860
M. Balajewicz
A Nolinear POD Reduced Order Model for Limit Cycle Oscillation Prediction........................................................ 2873G. Chen, Y. Li, G. Yan
Compression-Compression Fatigue Performance of a Fire Resistant Eco-Core........................................................ 2881M. Hossain, K. Shivakumar
Piezospectroscopic Measurements on Alumina-Epoxy Composites ............................................................................ 2889A. Wright, C. Gonzalez, A. Jones, S. Raghavan
Stitch-Bonded Closed-Cellular Foam Cored Sandwich Composites for Improved Performance............................. 2894P. Potluri, A. Aktas, I. Porat
Modeling Near-Crack-Tip Plasticity at Nano- to Micro- Scales .................................................................................. 2903E. Glaessgen, E. Saether, J. Hochhalter, V. Yamakov
Modeling of Mechanical Behavior of Pillard Graphene Structures ............................................................................ 2924S. Sihn, V. Varshney, A. Roy
Nonlinear Aeroelastic Power Flow Control for Wind Turbines .................................................................................. 2937R. Robinett, D. Wilson
Extreme Loads on a Spar Buoy-Supported Floating Offshore Wind Turbine ........................................................... 2945A. Sultania, L. Manuel
An Efficient Modeling Approach for Dynamic Simulation of Pre-Twisted Wind Turbine Blades........................... 2958S. Alpay, A. Barut, E. Madenci
Verification of BModes: Rotary Beam and Tower Modal Analysis Code................................................................... 2969G. Bir
Panel Resonant Behavior of Wind Turbine Blades....................................................................................................... 2982D. Griffith, J. Paquette
SMorph – Smart Aircraft Morphing Technologies Project ......................................................................................... 2995S. Miller, G. Vio, J. Cooper, J. Vale, L. da Luz, A. Gomes, F. Lau, A. Suleman, L. Cavagna, A. De Gaspari, S. Ricci, L. Riccobene, A. Scotti, M. Terraneo
A Two-Way Morphing Actuation of Bi-Stable Composites with Piezoelectric Fibers............................................... 3009A. Senba, T. Ikeda, T. Ueda
Neuro-Fuzzy Controller for SMAs for a Morphing Wing Application ....................................................................... 3019L. Grigorie, R. Botez
Optimal Problem Definition for Optimization of Morphing Structures ..................................................................... 3040O. Rhodes, M. Santer
Nonlinear Modeling and Optimal Initial Profile Solution for Deployable Mesh Reflectors...................................... 3058H. Shi, B. Yang, M. Thomson, H. Fang
Error Control via Tension for an Array of Flexible Square Antenna Panels ............................................................. 3070G. Greschik, J. Mejia-Ariza
Accuracy of Photogrammetry Texture-Based Surface Reconstruction on Curved Surfaces ................... 3104A. Jennings, D. Magree, G. Briggs, C. Allen, J. Black, M. Jameson, D. Rogers, A. Pollock, J. Blandino
Optimized Designs of Composite Booms with Tape Spring Hinges............................................................................. 3122H. Mallikarachchi, S. Pellegrino
Modeling the Dynamics of an Inflatable, Self-Rigidizing Toroidal Satellite Component .......................................... 3138M. Pazhooh, M. Dokainish, S. Ziada
Effects of Cross-Sectional Deformation on Mechanical Properties of Inflatable Tubes ............................................ 3145H. Furuya, Y. Yasuike
Development of Framework for Truss-Braced Wing Conceptual MDO .................................................................... 3155O. Gur, M. Bhatia, W. Mason, J. Schetz, R. Kapania, T. Nam
Robust Design Considerations in the Multi-Objective Problem of Aircraft Conceptual Design .............................. 3187M. Daskilewicz, B. German, T. Takahashi, S. Donovan, A. Shajanian
Toward Right-Fidelity Rotorcraft Conceptual Design ................................................................................................. 3206J. Sinsay, G. Nunez
A Hybrid MDO Architecture for Launch Vehicle Conceptual Design ....................................................................... 3220C. Geethaikrishan, P. Mujumdar, K. Sudhakar, V. Adimurthy
Multi-Objective UAV Path Planning with Refined Reconnaissance and Threat Formulations ............................... 3237L. Swartzentruber, J. Foo, E. Winer
Optimization of UAV Designs for Aerodynamic Performance Using Genetic Algorithms ....................................... 3251V. Ahuja, R. Hartfield
Shape and Trajectory Optimization of Flapping Airfoil .............................................................................................. 3266B. Lee, M. Liou
Design Optimization of a Bendable UAV Wing Under Uncertainty ........................................................................... 3284V. Jagdale, F. Viana, R. Haftka, P. Ifju
Neural Network Metamodel-Based MDO for Wing Design Considering Aeroelastic Constraints........................... 3297P. Caixeta Jr., F. Marques
Reliability Assessment using Probabilistic Support Vector Machines (PSVMs)........................................................ 3307A. Basudhar, S. Missoum
Effects of Parameter Uncertainties on the Response of an Aeroelastic System .......................................................... 3322M. Ghommem, A. Nayfeh, M. Hajj
FORM-Based Filtering of Limit States for Gaussian Random Fields......................................................................... 3333D. Sparkman, L. Domyancic, H. Millwater
System Reliability Error-Based Identification of Critical Locations Using Sampling ............................................... 3348L. Smith, H. Millwater
ABAQUS Fire Interface Simulator Toolkit (AFIST) for Coupled Response Prediction ........................................... 3361C. Luo, L. Chen, J. Lua, P. Liu
Frequencies and Flutter Speed Estimation for Damaged Aircraft Wing Using Scaled Equivalent Plate Analysis............................................................................................................................................................................. 3381
T. Krishnamurthy
Barely Visible Impact Damage Evaluation of Composite Sandwich Structures ........................................................ 3394A. Singh, B. Davidson, D. Eisenberg, M. Czabaj, A. Zehnder
Buckling and Propagation of a Delaminated Composite Beam in Bending ................................................................ 3411M. Kinawy, R. Butler, G. Hunt
Independent Component Analysis and K-Means Clustering for Damage Detection in Structural Systems ............................................................................................................................................................................. 3422
M. Elseifi
New Families of Hygrothermally Stable Composite Laminates with Optimal Extension-Twist Coupling ........................................................................................................................................................................... 3442
R. Haynes, E. Armanios
VOLUME 5
Approximations for Warp-Free Laminate Configurations .......................................................................................... 3451
P. Weaver, M. O’Donnell, C. York
Balanced and Symmetric Laminates – New Perspectives on an Old Design Rule...................................................... 3464C. York, P. Weaver
Layup Optimization of Laminated Composite Patches Considering Uncertainty of Material Properties ......................................................................................................................................................................... 3491
J. Lee, M. Cho, H. Kim, J. Kim
Effects of Buckling-Knockdown Factor, Internal Pressure and Material on the Design of Stiffened Cylinders .......................................................................................................................................................................... 3499
A. Lovejoy, M. Hilburger, P. Chunchu
Durable Joining Technology for Uniformly-Curved Composite Sandwich Structures ............................................. 3511E. Lundgren, S. Smeltzer, R. Kapania
Preliminary Structural Sizing of the Hat-Stiffened, Corrugated, and Fluted Panel Concepts for ARES V Vehicle Shroud ................................................................................................................................................. 3538
B. Zalewski, W. Dial
Design of Fiber Reinforced Foam Sandwich Panels for Large Ares V Structural Applications............................... 3551B. Bednarcyk, S. Arnold, D. Hopkins
Ares V Interstage Composite Panel Concept and Ringframe Spacing Trade Studies ............................................... 3570C. Collier, J. Ainsworth, P. Yarrington, D. Johnson, R. Lucking
Seal Analysis for the Ares-I Upper-Stage Fuel Tank Manhole Covers ....................................................................... 3615D. Phillips, R. Wingate
Application of Integrated Aero-Mechanical Tools to Design of a Flap Drive System................................................ 3633H. Briggs, B. Ross
Stress and Displacement Wave Propagation in a Percussive Tubular Mechanism for Space Applications...................................................................................................................................................................... 3650
R. Malla, B. Shrestha, K. Zacny
Stiffness Analysis of Closed Cross-Section Composite Grid-Stiffened Cylinders ...................................................... 3668S. Narayanan Nampy, E. Smith
Geometrically Exact Total-Lagrangian Modeling and Nonlinear Finite Element Analysis of Highly Flexible Multibody Systems ............................................................................................................................................ 3681
G. Wu, P. Pai, X. He
Geometrical Modeling and Collapse Surfaces of Wire-Woven Bulk Kagome Structures ......................................... 3695H. Hur, J. Joo, K. Kang
Advanced Flapping Wing Structure Fabrication for Biologically-Inspired Hovering Flight.................................... 3728L. Xie, P. Wu, P. Ifju
Structural Dynamic Characterization of an Insect Wing............................................................................................. 3742A. Norris, A. Palazotto, R. Cobb
Wavelet-Based Model for One-Dimensional Periodic Structure ................................................................................. 3772P. Sonekar, M. Mitra
Enhancement of Roll Maneuverability Using Post-Reversal Design. Part I: Nonlinear Analysis............................. 3782W. Li, D. Hodges
Computational Aeroelastic Simulation of Rapidly Morphing Air Vehicles................................................................ 3815E. Selitrennik, M. Karpel, Y. Levy
Aerodynamic Reduced–Order Models Based on Observer Techniques ..................................................................... 3831X. Liu, Z. Wu, C. Yang
An Efficient POD/ROM-Based Aeroelasticity Model ................................................................................................... 3842P. Hu, K. Ni, K. Qu, L. Xue, H. Zhao, E. Dowell
Energy-Based Modal Basis Selection Procedure for Reduced-Order Nonlinear Simulation .................................... 3854X. Guo, A. Przekop
A Comparison of Direct and Indirect Method in Reduced-Order Nonlinear Simulation ......................................... 3870X. Guo
Proper Orthogonal Decomposition for Reduced-Order Thermal Solution in Hypersonic Aerothermoelastic Simulations....................................................................................................................................... 3885
N. Falkiewicz, C. Cesnik
Generalized Mu-Omega Method with Complex Perturbation to Dynamic Pressure ................................................ 3920Y. Gu, Z. Yang
Damage Identification of a Structure with Significant Subsystem Variability........................................................... 3935J. Lew, J. Juang, J. Tang
Real Spherical µ Computation with Application to Robust Flutter Analysis ............................................................. 3947Y. Dai, Z. Wu, C. Yang
Worst Case Flutter Analysis of a Stored Wing with Structural and Aerodynamc Variation ................................... 3960C. Chung, S. Shin
Pan Tilt Zoom Camera System for Dynamic In-Flight Tracking and Measurement ................................................ 3981A. Jennings, D. Magree, G. Briggs, C. Allen, J. Black, M. Jameson, D. Rogers, A. Pollock, J. Blandino
Identification of Multiple Input Forces in Vibration Testing of Flight Vehicle Structures ....................................... 3996A. Joshi, D. Ramakrishna, P. Muju, Y. Krishna
Cable Effects Study: Tangents, Rat Holes, Dead Ends, and Valuable Results ........................................................... 4010E. Ardelean, D. Coombs, J. Griffee, V. Babuska, J. Goodding, L. Robertson III, S. Lane
Vibration Testing of a Full-Scale Carbon Composite Ultralight Unmanned Aerial Vehicle..................................... 4030R. Sullivan, J. Simsiriwong
Results of the GVT of the Unmodified GARTEUR SM-AG-19 Testbed in South America ...................................... 4040S. Rett, A. Nabarrete, M. Arbelo, L. Goes, G. Guimaraes
Analytical and Computational Micromechanics Analysis of the Effects of Interphase Regions and Orientation on the Effective Coefficient of Thermal Expansion of Carbon Nanotube-Polymer Nanocomposites ............................................................................................................................................................... 4050
G. Seidel, S. Stephens
Multiscale Modeling of Nanoparticle Reinforced Polymers Using Statistical Coupling of MD and GIMPM ............................................................................................................................................................................ 4063
S. Roy, A. Nair
Molecular Modeling of Cross-Linked Epoxy Polymers................................................................................................ 4075A. Bandyopadhyay, B. Jensen, P. Valavala, G. Odegard
Strain Gradient Modification of the Mori-Tanaka Model to Predict the Elastic Properties of the Layer by Layer (LBL) Polymer/Clay Nanocomposites ................................................................................................ 4082
Y. Li, A. Waas, E. Arruda
Prediction of Mechanical Properties of EPON 862 (DGEBF)-W (DETDA) Using MD Simulations........................ 4090F. Komuves, A. Kelkar, R. Mohan, V. Kelkar
Computational Implementation of a Thermodynamically Based Work Potential Model for Progressive Microdamage and Transverse Cracking in Fiber-reinforced.................................................................. 4099
E. Pineda, A. Waas, B. Bednarcyk, C. Collier
Evaluation of Global/Local Strategies for Detailed Stress Analysis of Textile Composites ....................................... 4120K. Maxwell, B. Owens, W. McLendon, J. Whitcomb, J. Varghese
A Simplified Analysis of Initial Core Shear Cracking in Composite Sandwich Beams ............................................. 4135R. Gibson
Mechanism-Based Direct Simulation of Tensile Failure in Composite Laminates .................................................... 4145E. Iarve, M. Gurvich, D. Mollenhauer
Finite Element Thermal Analysis for Microscale Laser Joining of Glass/Silicon System ......................................... 4155A. Dhorajiya, M. Mayeed, G. Newaz
Fatigue Trends for Wind Blade Infusion Resins and Fabrics ...................................................................................... 4161D. Samborsky, J. Mandell, A. Agastra
Fatigue Results and Analysis for Thick Adhesive Notched Lap Shear Test ............................................................... 4190D. Samborsky, J. Mandell, A. Sears, D. Samborsky
Embedded Sensors for Composite Wind Turbine Blades ............................................................................................ 4214D. Cairns, N. Palmer, J. Ehresman
Effects of Cold Temperature, Moisture and Freeze-Thaw Cycles on the Mechanical Properties of Unidirectional Glass Fiber-Epoxy Composites.............................................................................................................. 4229
L. Cormier, S. Joncas
Composite Star-Beams as Pitch Compliant Mechanisms for Active Windmill Blade Tips ....................................... 4248D. Dancila, J. Goss, J. Cline, K. Ha
Vortex Particle Aerodynamic Modelling of Perching Manoeuvres with Micro Air Vehicles.................................... 4258D. Robertson, G. Reich, J. Joo
Perch Landing Manuevers for a Rotating Wing MAV................................................................................................. 4272T. Seigler, J. Lubbers, G. Reich
VOLUME 6
Demonstration of Adaptive Structures Performance On Modular Micro Air Vehicle.............................................. 4284
C. Boller, C. Kuo
In-Flight Dynamically Adaptive Configurations: Lessons from Live Lepidoptera ..................................................... 4307R. Albertani, A. Chakravarthy, J. Evers
Structural Verification and Modeling of a Tension Cone Inflatable Aerodynamic Decelerator .............................. 4320C. Tanner, J. Cruz, R. Braun
Though Shell Quantification of Deployment Behavior Of Rollable Membrane Shell Apertures ............................. 4332H. McGinnis, S. Lee, S. Smith, E. Flint, J. Lindler
An Iterative Method to Compute the Deformed Shape of an Inflatable Aerodynamic Decelerator......................... 4345L. Bermudez
Identification of Modular Product Platforms and Modules that Account for Changing Consumer Needs................................................................................................................................................................................. 4353
P. Lewis, V. Murray, C. Mattson
Comprehensive Product Platform Planning (CP3) Framework: Presenting a Generalized Product Family Model ................................................................................................................................................................... 4370
S. Chowdhury, A. Messac, R. Khire
Multidisciplinary Optimization of Submarine Performance Using Genetic Algorithms........................................... 4391V. Ahuja, M. Gupta, S. Shrivastava
Multi-Material Structural Topology Optimization for Blast Mitigation Using Hybrid Cellular Auomata ........................................................................................................................................................................... 4407
J. Goetz, H. Tan, J. Renaud, A. Tovar
Optimal Structural Topology of a Plate-Like Wing for Subsonic Aeroelastic Stability ............................................ 4427B. Stanford, P. Beran
Topology Optimization Using a Level Set Method with an Arbitrary Structured Mesh........................................... 4444K. James, J. Martins
Introducing Uncertainty in Direction of Loading for Topology Optimization ........................................................... 4456P. Dunning, A. Kim, G. Mullineux
Optimal Allocation of Testing Resources for Statistical Simulations .......................................................................... 4466H. Millwater, C. Dubinsky, G. Singh
Development of Risk Contours for Assessment of Aircraft Engine Components....................................................... 4479W. Liang, M. Enright, J. Moody, S. Fitch
Computational Simulation for Probabilistic Combined Cyclic Fatigue in Composites ............................................. 4489C. Chamis
Distributed Computing for Probabilistic Structural Integrity Analysis of Aircraft Structures ............................... 4500G. Singh, J. Ocampo, C. Acosta, H. Millwater
Multidisciplinary Design of Multistage Interceptor Using Particle Swarm Optimization ........................................ 4512Q. Zeeshan, D. Yunfeng, A. Rafique, A. Kamran, K. Nisar
Importance Sampling: Promises and Limitations......................................................................................................... 4519L. Swiler, N. West
Parameter Estimation via Gaussian Processes and Maximum Likelihood Estimation ............................................. 4533N. West, L. Swiler
Applying EGRA to Reliability Analysis of Systems with Multiple Failure Modes..................................................... 4543B. Bichon, J. McFarland, S. Mahadevan
Representation and Propagation of both Probabilistic and Interval Uncertainty...................................................... 4556K. Zaman, M. McDonald, S. Rangavajhala, S. Mahadevan
Robust Kriging Models ................................................................................................................................................... 4563J. Martin
Overview of the DARPA Structural Integrity Prognosis System (SIPS) .................................................................... 4575J. Madsen, E. Anagnostou, S. Engel, D. Hoitsma, J. Nardiello, J. Papazian
Structural Integrity Prognosis System Reasoning ........................................................................................................ 4583D. Hoitsma, E. Anagnostou, S. Engel, J. Madsen, J. Papazian, K. Speiser
Structural Integrity Prognosis System Demonstration and Transition.......................................................... 4593S. Engel, E. Anagnostou, D. Fridline, J. Madsen, J. Nardiello, J. Papazian
Fusion of Vibration and On-Line Oil Debris Sensors for Aircraft Engine Bearing Prognosis ................................. 4610H. Qiu, N. Eklund, H. Luo, M. Hirz, G. Van Der Merwe, E. Hindle, T. Rosenfeld, F. Gruber
Multi-Classifier Fusion for Assessing the Health of Aircraft Engines......................................................................... 4622N. Eklund, H. Qiu, W. Yan, X. Hu, T. Rosenfeld, E. Hindle
Mixed Mode In-Plane Fracture Analysis of Laminated Fiber Reinforced Composites Using the VariationalMultiscale Cohesive Method........................................................................................................................ 4632
S. Rudraraju, A. Waas, K. Garikipati, A. Salvi
Small Time Scale Fatigue Crack Growth Analysis Under Variable Amplitude Loading.......................................... 4646Y. Liu, Z. Lu
Moment Curvature Response in Polymer Materials .................................................................................................... 4655M. Yekani Fard, Y. Liu, A. Chattopadhyay
Probabilistic Analysis of a Thin-Walled Beam with a Crack ....................................................................................... 4668C. Kunaporn, M. Singh, M. Patil, R. Kapania
Stress Intensity Factor Solution for Cracks at an Offset Loaded Fastener Hole........................................................ 4682Y. Bombardier, M. Liao
A Review of Soft Body Impact on Composite Structure............................................................................................... 4700A. Khan, R. Kapania, E. Johnson
A Probabilistic Study of Composite Impact Damage Design Strain Allowables ........................................................ 4718B. Flansburg, S. Engelstad, C. Rousseau
Compression After Impact of Sandwich Composite Structures: Experiments and Modeling .................................. 4731M. Czabaj, A. Zehnder, D. Eisenberg, A. Singh, B. Davidson
Compression After Impact Modeling of Damage Tolerant Composite Laminates .................................................... 4747N. Baker, R. Butler, W. Liu
Ballistic Resistance of Multi-Layered Sandwich Composites....................................................................................... 4756H. Hur, M. Kim
Reliability-Based Framework for Damage Prognosis of Adhesively-Bonded Joints in Composite UAV Wings ................................................................................................................................................................................ 4780
M. Gobbato, J. Conte, J. Kosmatka, C. Farrar
Tomographic Electrical Resistance-based Damage Sensing in Nano-Engineered Composite Structures................ 4794S. Wicks, R. Guzman de Villoria, A. Raghavan, S. Kessler
Localized Response of Damaged Structural Systems ................................................................................................... 4802G. Bordonaro, D. Harold, M. Hajj, J. Duke
Fastener Inspection Development for Structural Health Monitoring of Responsive Space Satellites ...................... 4812D. Doyle, W. Reynolds, H. Dumm, B. Arritt, J. Eden
Experimental Determination of Unsteady Aerodynamic Coefficients for a Three Dimensional Rigid Wing.................................................................................................................................................................................. 4831
J. Song, S. Song, T. Kim
Aeroelastic Analysis of Airfoil in Unsteady Free Stream ............................................................................................. 4843B. Zhu, Z. Qiao
Structural and Dynamic Analysis of a Seamless Aeroelastic Wing ............................................................................. 4850M. Perera, Y. He, S. Guo
Nonlinear Aeroelastic Analysis for A Wrinkling Aeroshell/Ballute System ............................................................... 4861Z. Wang, S. Yang, D. Liu, X. Wang, M. Mignolet, R. Bartels
Influences of Geometrical Factors on the Crashworthiness of Open Shells ............................................................... 4883Y. Ren, J. Xiang
Modeling of Nonlinear Magnetoelastic Circular Cylindrical Shells Subjected to Electrical and Magnetic Fields ................................................................................................................................................................ 4893
Z. Qin, D. Hasanyan
Optimal Stacking Sequence for Nonlinear Vibration of Laminated Composite Circular Cylindrical Shells ................................................................................................................................................................................. 4903
Y. Ohta
Effects of Sloshing on Flutter Prediction of Partially Liquid-Filled Circular Cylindrical Shells.............................. 4911F. Sabri, A. Lakis
Active Rotation and Vibration During the Flapping Stroke of a Micro Elastic Wing for Thrust Production ........................................................................................................................................................................ 4943
P. Wu, J. Bou, L. Ukeiley, P. Ifju, E. Sallstrom
Nonlinear Aeroelastic Simulations of a Flapping Wing Micro Air Vehicle Using Two Unsteady Aerodynamic Formulations ............................................................................................................................................ 4957
W. Su, C. Cesnik
Aeroelastic Analysis of a MAV-Scale Cycloidal Rotor ................................................................................................. 4979M. Benedict, M. Mattaboni, I. Chopra, P. Masarati
Blended Time Integration Algorithms for Nonlinear Elastodynamics........................................................................ 5007S. Dong
The Response of a Mechanical Oscillator due to Swept and Dithered Excitation...................................................... 5037R. Davis, A. Brown, R. Durham
Experimental Nonlinear Dynamics of a Highly Flexible Spinning Beam Using a 3-D Motion Analysis System............................................................................................................................................................................... 5049
X. Qian, X. Du, P. Pai
Analysis of a Dual Gearbox/Shaft System with Nonlinear Dynamic Mesh Phase Interactions................................. 5061H. DeSmidt
Improvements on Impact Energy Absorbing Ability of Open Section Short Columns ............................................. 5072H. Shoji, T. Aoki
Atomistic and Continuum Understanding of the Particle Clustering and Particle Size Effect on the Room and High Temperature Strength of SiC-Si3N4 Nanocomposites ....................................................................... 5080
V. Tomar
Damping Characteristics of Carbon Nanotube-Epoxy Composites via Multiscale Analysis..................................... 5092A. Liu, K. Wang, C. Bakis
VOLUME 7
Non-Local Continuum Modeling of Carbon Nanotubes; Computation of Spatial Kernal Using Helical Symmetry Lattice Dynamics........................................................................................................................................... 5100
V. Sundararaghavan, A. Waas
A Reduced-Order General Continuum Method for Dynamic Simulations of Carbon Nanotube............................. 5112Y. Yang, W. Liou
Interfacial Effects on Size-Dependent Strength of Nanostructured Materials and Systems ..................................... 5132R. Abu Al-Rub
Piezoelectric Paint based 2-D Sensor Array for Detecting Damage in Aluminum Plate ........................................... 5137B. Yoo, A. Purekar, D. Pines, Y. Zhang
A Wavelet Spectral Element for Composite Plate with Delamination and Transverse Damage .............................. 5155S. Gopalakrishnan, R. Jha
Nonlinear Wave Spectroscopy SHM Methods Using An Active Nonlinear Pieceramic Sensor for Delamination Detection in Composites .......................................................................................................................... 5168
N. Chrysochoidis, D. Saravanos, T. Assimakopoulou
An Integrated Effort for the SHM of On-Orbit Satellite Boom Structures ................................................................ 5178Y. Liu, S. Kim, K. Liu, A. Chattopadhyay
Effect of Dent on Electrical Resistance Change Method for Delamination Monitoring ............................................ 5191A. Todoroki, Y. Samejima, Y. Hirano, R. Matsuzaki
Impact Localization on a Composite Wing Using Fiber Bragg Grating Sensors ....................................................... 5201C. Coelho, C. Hiche, A. Chattopadhyay
Development and Design of an AFIT CubeSat Demonstrating Deployable Technology ........................................... 5215P. Swenson, G. Thomas, R. Cobb, J. Black, E. Swenson
Prototype Development and Dynamic Characterization of Deployable CubeSat Booms .......................................... 5236G. Thomas, P. Swenson, R. Cobb, E. Swenson, J. Black
Membrane Modular Space Structures and Deployment Characteristics of Their Inflatable Tube Elements ........................................................................................................................................................................... 5257
M. Natori, N. Katsumata, H. Yamakawa
Membrane Reflector Shape Control Using a Bio-Inspired MRF-Foam Actuator ..................................................... 5266J. LaRocque, E. Meehan, C. Wentling, C. Jenkins, K. Woo
Aerodynamic Optimization Using a Hybrid MOGA-Local Search Method............................................................... 5275H. Kim, M. Liou
A Provably Convergent Multifidelity Optimization Algorithm not Requiring High-Fidelity Derivatives........................................................................................................................................................................ 5298
A. March, K. Willcox
Requirements for Developing System Behavioral Models by Composition of Available Discipline Specific Models ................................................................................................................................................................ 5316
B. Larson, C. Mattson
Overview of Methods for Multi-Level and/or Multi-Disciplinary Optimization........................................................ 5330A. de Wit, F. van Keulen
Hybridizing Genetic Algorithm with Artificial Neural Network in the Aerodynamic Optimization of the Forward Swept Wing ................................................................................................................................................ 5351
E. Vatandas
Adaptive Optimal Design of Active Thermally Insulated Windows Using Surrogate Modeling .............................. 5360J. Zhang, A. Messac, S. Chowdhury, J. Zhang
SCOOT: Sensitivity Class with Operator Overloaded Types ...................................................................................... 5376M. Blair
A Robust and Reliability-Based Design Optimization Framework for Wing Design ................................................ 5402R. Paiva, A. Carvalho, C. Crawford, A. Suleman, R. Canfield
Multidisciplinary Robust Design and Optimization of Multistage Boost Phase Interceptor..................................... 5415Q. Zeeshan, D. Yunfeng, A. Rafique, A. Kamran, K. Nisar
Risk Assessment of Hypersonic Flow Simulations Using Adjoint-Based Sampling Methods ................................... 5433Q. Wang, K. Duraisamy, J. Alonso, G. Iaccarino
Global Sensitivity Analysis for Stochastic Collocation ................................................................................................. 5451G. Tang, G. Iaccarino, M. Eldred
The Application of the Probabilistic Collocation Method to a Transonic Axial Flow Compressor .......................... 5464A. Loeven, H. Bijl
Simplex Elements Stochastic Collocation in Higher-Dimensional Probability Spaces .............................................. 5480J. Witteveen, G. Iaccarino
Constructing Response Surfaces Using Imperfect Function Evaluations ................................................................... 5497J. Axerio, G. Iaccarino, Q. Wang
Hopf Bifurcation Scenario of a Stochastic Aeroelastic Model with Cubic Nonlinearities ......................................... 5526C. Popescu
Use of GENOPT and BIGBOSOR4 to Optimize Weld Lands Inaxially Compressed Stiffened Cylindrical Shells and Evaluationof the Optimized Designs by Stags......................................................................... 5543
D. Bushnell, R. Thornburgh
An Exact Solution for the History-Dependent Material and Delamination Behavior of Laminated Plates Subjected to Cylindrical Bending........................................................................................................................ 5681
T. Williams
A Robust Shell Element with Consistent In-Plane and Transverse Bending Deformations for Analyzing Stiffened Structures ....................................................................................................................................... 5692
S. Alpay, A. Barut, E. Madenci, A. Tessler
Layer-Wise Theories for the Analysis of Thermo-Mechanical Coupling of Layered Structures.............................. 5703S. Brischetto, E. Carrera
CASPAR Payload Adapter Structural Failure Test Correlation to Flight Environment.......................................... 5719A. Biskner, G. Sanford, J. Maly, B. Arritt
Biologically-Inspired Multifunctional Composite Panel with Integrated Thermal Control...................................... 5729A. Williams, L. Underwood, G. Busch, B. Taft, B. Arritt
Structural Design and Analysis of a Novel Space-Based Chromotomographic Spectrometer .................................. 5740S. Miller, E. Swenson, R. Cobb, J. Black, C. Hartsfield, T. Book, W. Starr, A. Morse
Low-Cost Flat Plate Adapters for Dual Primary Payload Missions ............................................................................ 5755S. Pendleton, J. Basile, E. Fowler
A Study of Fatigue Damage Growth Under Biaxial Loading Condition Based on a Developed Multiscale Damage Criterion.......................................................................................................................................... 5764
C. Luo, A. Chattopadhyay, S. Mohanty
Residual Stress Intensity Factor Based Fatigue Crack Growth Life Prediction for Laser Peened Structures ......................................................................................................................................................................... 5776
J. Im, R. Grandhi
Three-Dimensional Finite Element Prediction of Surface Crack Growth on Titanium Tubes ................................. 5787K. Ni, P. Hu, M. Gupta
Random Crack Propagation Analysis of a Beam with a Crack ................................................................................... 5796C. Kunaporn, M. Singh, M. Patil, R. Kapania
Optimum Designer/Tailored Stitched Composites........................................................................................................ 5811D. Lee, H. Hilton, A. Velicki
Structural Topology Optimization Considering Correlated Uncertainties in Elastic Modulus ................................ 5842J. Guest, A. Asadpoure, T. Igusa
COPV Standard Requirements Implementation Issues ............................................................................................... 5850Y. Ni, J. Chang
Structural Performance of Composite Material for a Slotted Waveguide Antenna Stiffened Structure Under Compression ......................................................................................................................................................... 5865
J. Sabat, A. Palazotto, W. Kaval
Tailoring for Strength of Steered-Fiber Composite Panels with Cutouts ................................................................... 5878C. Lopes, P. Camanho, Z. Gurdal
Generation of Aeroservoelastic Reduced Order Models Using Time Scaling............................................................. 5886D. Hammerand, J. Gariffo, K. Roughen, M. Baker, O. Bendiksen
Structure – Control Interactions in Flexible Aerospace Vehicles ................................................................................ 5903A. Joshi
VOLUME 8
Active Control of Vibration Modes of a Wing Box by Piezoelectric Stack Actuators................................................ 5916
M. Kulkarni, G. Kumar, P. Mujumdar, A. Joshi
Use of Bifurcation Methods in the Identification and Control of Flexible Aircraft Dynamics.................................. 5947N. Baghdadi, M. Lowenberg, A. Isikveren
Control of an Aeroelastic System with Control Surface Nonlinearity......................................................................... 5966D. Li, S. Guo, J. Xiang, N. Di Matteo
High-Fidelity Flutter Analysis of a Re-Usable Launch Demonstrator with Wing-Tip Vertical Tails ...................... 5984A. De La Garza, M. Skillen, P. Zink, C. Reed, S. Voorhees, R. Snyder
Large Scale Computations for Stability Analysis of Launch Vehicles using Cluster Computers ............................. 5997G. Guruswamy
CFD Fuel Slosh Modeling of Fluid-Structure Interaction in Spacecraft Propellant Tanks with Diaphragms ...................................................................................................................................................................... 6009
D. Sances, S. Gangadharan, J. Sudermann, B. Marsell
Hybrid Control System for Launch Vehicle and Spacecraft Antenna Boom Structures........................................... 6018L. Nicastro III, M. Azeez, J. Dhainaut, S. Gangadharan, C. Subramanian, O. Abdelkhalik
Accurate Dynamic Response Predictions of Various Plug-and-Play SAT I Configurations ..................................... 6023M. Trottier, L. Baghal, E. Swenson, J. Black, R. Cobb, C. Finley
High-Fidelity Models for the Fluid-Structure Interaction of a Flexible Heaving Airfoil........................................... 6034A. McClung, B. Stanford, P. Beran
Implicit LES Simulations of a Flexible Flapping Wing ................................................................................................ 6047R. Gordnier, P. Attar, S. Chimakurthi, C. Cesnik
Aeroelastic Optimization of a Two-Dimensional Flapping Mechanism ...................................................................... 6071D. Bryson, T. Weisshaar, R. Snyder, P. Beran
Thin Flapping Wings: Structural Model and Fluid-Structure Interactions ............................................................... 6087T. Fitzgerald, M. Valdez, S. Preidikman, B. Balachandran
Shape, Structure, and Kinematic Parameterization of a Power-Optimal Hovering Wing........................................ 6102B. Stanford, M. Kurdi, P. Beran, A. McClung
Uncertainty Propagation in Hypersonic Aerothermoelastic Analysis ......................................................................... 6120P. Friedmann, N. Lamorte, B. Glaz, J. McNamara, A. Crowell, A. Culler
Coupled Flow-Thermal-Structural Analysis for Response Prediction of Hypersonic Vehicle Skin Panels ................................................................................................................................................................................ 6139
A. Culler, J. McNamara
Multi-Fidelity Modeling and Simulation Tool For Aero-Servo-Thermo-Elasticity and Propulsion (ASTE-P) of Aerospace Vehicles .................................................................................................................................... 6173
P. Hu, L. Xue, K. Qu, K. Ni, N. Dittakavi, H. Zhao, R. Kamakoti, M. Brenner
A Numerical Study of the Aeroelastic Behaviors of Vehicles in Hypersonic Range................................................... 6214X. Cao, N. Taylor
A Reduced Order Aerothermodynamic Modeling Framework for Hypersonic Aerothermoelasticity .................... 6238A. Crowell, J. McNamara, K. Kecskemety, T. Goerig
Cumulative Damage Modeling for Nickel-Based Superalloys Under Creep and Fatigue Loading .......................... 6260J. Rigney, P. Wright, J. Miller, P. Kos, B. Talbert, M. Chati, J. Laflen, D. DeCesare, J. Madelone, J. LeMonds, E. Baik
Science-Based Multiscale Modeling of Fatigue Damage for Structural Prognosis..................................................... 6272E. Anagnostou, S. Engel, D. Fridline, D. Hoitsma, J. Madsen, J. Papazian, J. Nardiello
Usage-Based Life Prediction And Fleet Management For Gas Turbine Engines....................................................... 6293R. Grelotti, J. Glanovsky
Understanding Materials Uncertainty for Prognosis of Advanced Turbine Engine Materials................................. 6302J. Larsen, M. Caton, R. John, S. Jha, A. Rosenberger, R. John, D. Buchanan, J. Jira, P. Golden
Review of SIPS Experimental Results for System Calibration and Validation .......................................................... 6314J. Nardiello, E. Anagnostou, R. Christ Jr., S. Engel, J. Madsen, J. Papazian
Unified Low Cycle Fatigue Model for Gas Turbine Engine Rotor Alloys .................................................................. 6325D. Harmon, M. McClure, R. Grelotti
Characterization and Constitutive Modeling of Composite Materials under Static and Dynamic Loading............................................................................................................................................................................. 6335
I. Daniel, J. Cho, B. Werner, J. Fenner
Modeling of Thermo-Oxidative Degradation in High Temperature Polymer Matrix Composites........................... 6343S. Roy, S. Singh
On Homogenization of Random Heterogeneous Materials .......................................................................................... 6359Z. Ye, W. Yu
Thermal Design and Testing of a Micro-Satellite for Infrared Astrometry (Nano-JASMINE) ................................ 6372K. Ho, N. Sako, S. Nakasuka
Experimental Near-Space Free Fall Testing Systems ................................................................................................... 6384J. Snyder, C. Barnes, J. Rinderle, O. Shiryayev, J. Slater
An Integrated Approach for Design, Control and Optimization of Vibration Systems............................................. 6400D. Schuetze, A. Sadeghzadeh Milani, Y. Cao, H. Najjaran
Recognition of Design Variable Interdependencies Using Cross-Validated Moving Least-Squares Method.............................................................................................................................................................................. 6408
A. Polynkin, V. Toropov
Performance Enhancement of Air Launched Satellite Launch Vehicle Using Composite Motors ........................... 6418A. Rafique, H. LinShu, A. Kamran, Q. Zeeshan, M. Ying
Adaptive Neuro-Fuzzy Inference Controllers for Smart Material Actuators ............................................................ 6434T. Grigorie, R. Botez
Optimization of Blended Bistable Laminates for Morphing Control Surfaces .......................................................... 6457A. Panesar, P. Weaver
On a Cellular Division Model for Multi-Disciplinary Optimization............................................................................ 6468M. Kobayashi, A. LeBon, H. Pedro, R. Kolonay, G. Reich
Adaptive Aeroelastic Concept Applied to a Civil Jet Aircraft Model ......................................................................... 6481G. Vio, J. Cooper, K. Badcock, S. Marques
Experimental and Modeling study of Simultaneous Creep, Plasticity and Transformation of High Temperature Shape Memory Alloys during Cyclic Actuation..................................................................................... 6489
U. Desai, P. Kumar, G. Chatzigeorgiou, I. Karaman, J. Monroe, D. Lagoudas, R. Noebe, G. Bigelow
Analysis of a Magnetorheological Fluid Damper Incorporating Temperature Dependence..................................... 6504N. Wilson, N. Wereley
Hysteresis Characterization in Piezoceramic Stack Actuators and Its Influence on Vibration and Noise Reduction in Helicopters Using Actively Controlled Flaps ................................................................................ 6513
E. Muir, P. Friedmann, D. Kumar, L. Liu
Active CFRP-Panels for Reduction of Low-Frequency Turbulent Boundary Layer Noise ...................................... 6533H. Monner, M. Misol, S. Algermissen, O. Unruh, M. Siefert
Asymptotical Construction of Geometrically Nonlinear Plate Model for Functionally-Graded Magneto-Electro-Elastic Laminates ............................................................................................................................... 6545
H. Chen, W. Yu
A Simulation-based Design Model for Analysis and Optimization of Multi-State Aircraft Performance ............... 6574J. Agte, N. Borer, O. de Weck
Formulation of Analytical Design Derivatives for Nonlinear Unsteady Aeroelasticity.............................................. 6587B. Stanford, P. Beran
Optimization of Aircraft Configuration for Minimum Drag ....................................................................................... 6607T. Boone IV, A. Striz
Smooth Shape and Topology Design Using B-Spline Elements ................................................................................... 6616A. Kumar, A. Parthasarathy
Development and Implementation of Novel Parametrization Techniques for Multidisciplinary Design Initialization ..................................................................................................................................................................... 6626
M. Straathof, M. van Tooren, M. Voskuijl, R. Vos
Gradient-Based Optimization Of A Turboprop Rotor System with Constraints On Stresses And Natural Frequencies ........................................................................................................................................................ 6643
A. Pugachev, A. Sheremetyev, V. Tykhomirov, I. Timchenko
Effect of Chemistry Modeling on Multidisciplinary Hypersonic Vehicle Design ....................................................... 6656R. Starkey
Vibration Reduction of Launch Vehicle Adapter Table in Wide Frequency Domain and Investigation of Install Configuration for Small Satellites .................................................................................................................. 6667
A. Torisaka, H. Yamakawa
Multidisciplinary Design Optimization of a Controllable Reentry Capsule for minimum Landing Velocity ............................................................................................................................................................................. 6678
M. Nosratollahi, M. Hosseini, A. Adami
Multidisciplinary Design Optimization of Solid Launch Vehicle Using Hybrid Algorithm ...................................... 6689N. Zafar, H. LinShu
Improved Monte Carlo Sampling for Conflict Probability Estimation ...................................................................... 6701J. Chryssanthacopoulos, M. Kochenderfer, R. Williams
Assessment of Impact of Modeling Simplifications for a Medium Voltage DC Shipboard Power System............................................................................................................................................................................... 6718
D. Lee, D. Infante, J. Langston, S. Poroseva, M. Steurer, T. Baldwin
VOLUME 9
Application of Auto-Covariance Orthogonal Decomposition in the Response of Multi Degree of Freedom (MDOF) Systems to Non-Stationary Random Vibration Processes ............................................................ 6728
K. Scott, S. Mulani, R. Kapania
Nondeterministic Finite Element Analysis with Shape Uncertainty Based on Interval Fields.................................. 6741D. Moens, W. Verhaeghe, A. Rousounelos, W. Desmet, D. Vandepitte
Energy Transformation to Generalized Timoshenko Form by the Variational Asymptotic Beam Sectional Analysis ............................................................................................................................................................ 6749
J. Ho, W. Yu, D. Hodges
Experiments with Geometric Non-Linear Coupling for Analytical Validation.......................................................... 6773J. Boston, E. Swenson, D. Kunz, W. Yu, M. Blair
A General-Purpose Implementation of the Mixed Formulation of the Geometrical Exact Beam Theory............................................................................................................................................................................... 6793
W. Yu, M. Blair
A Refined Model for Thermoelastic Analysis of Initially Curved/Twisted Composite Beams.................................. 6809Q. Wang, W. Yu
A Beam Formulation with Shell Capabilities ................................................................................................................ 6824E. Carrera, M. Petrolo
An Evaluation of Common Analysis Methods for Bolted Joints in Launch Vehicles ................................................ 6838G. Henson, B. Hornish
Load Development and Automation for Composite Bolted Joint Bearing and Bypass Analysis .............................. 6865R. Taylor, M. Henson, C. Rousseau
Analysis of Fasteners as Disbond Arrest Mechanism for Laminated Composite Structures .................................... 6876C. Cheung, P. Gray, K. Lin, G. Mabson
Effects of Clearance Fit and Friction Coefficient on Triple-Row Riveted Lap Joints ............................................... 6888G. Li, G. Shi, N. Bellinger
Damage Growth Prediction from Loaded Composite Fastener Holes by Using Peridynamic Theory..................... 6912E. Oterkus, E. Madenci, A. Barut
Structural Health Monitoring of Boom Architectures for On-orbit Satellites Using System Identification Techniques................................................................................................................................................ 6926
Y. Liu, S. Kim, A. Chattopadhyay
Reference-Free Fatigue Crack Detection, Localization and Quantification in Lug Joints ........................................ 6940S. Soni, S. Kim, A. Chattopadhyay
Acoustic Emission-Based Health Monitoring of Interlaminar Matrix-Driven Damage in Advanced Composite Structures ...................................................................................................................................................... 6957
E. Velazquez, J. Kosmatka
Sensitivity Studies of Nonlinear Vibration Features For Detection of Cracks in Turbomachinery Components...................................................................................................................................................................... 6968
O. Shiryayev, J. Slater
Acoustic Emission Monitoring and Neural Network Fatigue Life Prediction in Steel Members.............................. 6981J. Suleman, A. Korcak, F. Barsoum, E. Hill
An Improved Beam Formulation for Aeroelastic Applications ................................................................................... 6988A. Varello, L. Demasi, E. Carrera, G. Giunta
Dynamic Stiffness Formulation for Plates Using First Order Shear Deformation Theory ....................................... 7011M. Boscolo, R. Banerjee
Modeling Beams with Various Boundary Conditions Using Fully Intrinsic Equations............................................. 7040Z. Sotoudeh, D. Hodges
Random Response Analysis of Curvilinearly-Stiffened Plate Using Element Free Galerkin Method...................... 7052A. Yeilaghi Tamijani, R. Kapania
Buckling and Vibration of Curvilinearly-Stiffened Plate Subjected to In-Plane Loads Using Chebyshev Ritz Method .................................................................................................................................................. 7075
A. Yeilaghi Tamijani, R. Kapania
Computational Dynamics for N-Body Systems with Conserving Algorithms ............................................................ 7109M. Shimada, A. Hoitink, K. Tamma, X. Zhou, J. Har
Analytic Sensitivity of Dynamics of Anisotropic Flexible Four-Bar Mechanisms to Various Stacking Sequences.......................................................................................................................................................................... 7135
H. Pollayi, D. Harursampath
Demonstration of a Multibody Analysis Program Based on Direct Solutions from Hamilton's Law....................... 7149A. Hainge, D. Kunz
Investigation of the Benefits and Effectiveness of Hamilton's Weak Principle for Multibody Sytems Analysis............................................................................................................................................................................. 7161
S. Askey, D. Kunz
A Surrogate Based Approach to Reduced-Order Dynamic Stall Modeling................................................................ 7176P. Friedmann, B. Glaz, L. Liu, J. Bain, L. Sankar
Numerical Simulation and Experimental Validation of Tailored Wave Guides for Ultrasonic De-Icing on Aluminum Plates ........................................................................................................................................................ 7200
Y. Zhu, J. Palacios, E. Smith, J. Rose
Assessment of 1-D Versus 3-D Methods for Modeling Rotor Blade Structural Dynamics ........................................ 7222H. Yeo, K. Truong, R. Ormiston
Experimental Targeted Energy Transfer to a Rotary Nonlinear Energy Sink .......................................................... 7241S. Hubbard, D. McFarland, L. Bergman, A. Vakakis
On How Structural Model Variability Influences Transonic Aeroelastic Stability.................................................... 7254S. Marques, K. Badcock, H. Khodaparast, J. Mottershead
Searching for Transonic Aeroelastic Instability Using an Aerodynamic Model Hierarchy ...................................... 7270S. Timme, K. Badcock
Inter-Grid Transfer Influence on Transonic Flutter Predictions ................................................................................ 7291A. Swift, K. Badcock
Gust Response Analysis of Free Elastic Aircraft in the Transonic Flight Regime ..................................................... 7310D. Raveh
Buffeting Pressure Field of an Airfoil at Transonic Speeds ......................................................................................... 7324H. Dang, Z. Yang
Mechanical Characterization of Nanofiber Enhanced Polymer with Application to Composite Crush Tubes................................................................................................................................................................................. 7333
M. Rouhi, M. Rais-Rohani, T. E. Lacy, M. Garg, F. Abdi
Advanced Multi-Scale Composites Material Characterization for Fracture Toughness and Impact Resistance Applications................................................................................................................................................... 7345
M. Garg, G. Abumeri, F. Abdi
Multi-Axial Failure Strengths of Open-Cell Foams with Tetrakaidecahedral Cells Using Finite Element Analysis.............................................................................................................................................................. 7359
P. Thiyagasundaram, B. Sankar, N. Arakere
Micro-Mechanical Tailoring of Composite Structure for Optimum Material Properties......................................... 7379S. Padhee, D. Harursampath
The Effect of Fiber Diameter on the Strength of Lightweight Composite .................................................................. 7387N. Hossain, C. Jenkins, K. Woo
Design Optimization of Hybrid Laminated Composite Structures Subjected to Stress Concentrations.................. 7402C. Metla, S. Gangadharan, N. Shah, N. Nagwekar, J. Patel, J. Lee
Multiscale Modeling of Oxidative Degradation of C-SiC Composite .......................................................................... 7411V. Sundararaghavan, S. Lee
Automated Control Surface Design and Sizing for the Prandtl Plane ........................................................................ 7426D. van Ginneken, M. Voskuijl, M. van Tooren, A. Frediani
Development of Solar-Powered Aircraft for Multipurpose Application..................................................................... 7434O. Rehman Alvi
Rolling of Drag Reducing Riblet Surfaces ..................................................................................................................... 7450T. Romans, G. Hirt
VABS-IDE: VABS-Enabled Integrated Design Environment (IDE) for Efficient High Fidelity Composite Rotor Blade and Wing Section Design ........................................................................................................ 7460
P. Hu, W. Yu, D. Hodges, J. Ku
Distributed Propulsion Featuring Boundary Layer Ingestion Engines for the Blended Wing Body Subsonic Transport ......................................................................................................................................................... 7470
H. Kok, M. Voskuijl, M. van Tooren
Frequency Domain Piezo-Aero-Elastic Analysis and Optimization of an Energy Harvester Wing ......................... 7482W. Rocha Vieira, C. De Marqui, A. Erturk, D. Inman
Energy Harvesting from a Standing Wave Thermo-Acoustic-Piezoelctric Resonator .............................................. 7495A. Baz, J. Smoker, O. Aldraihem, M. Nouh
Engaging Nonlinear Phenomena for Enhanced Vibratory Energy Harvesting.......................................................... 7509S. Stanton, B. Mann
Adaptive Dampers Employing Magnetorheological Valves Filled with Porous Media ............................................. 7524R. Robinson, W. Hu, N. Wereley
VOLUME 10
Optimal Terminal Trajectory Control of Vertically Stroking Crew Seats Using MREAs ........................................ 7539
H. Singh, Y. Choi, N. Wereley
Launch Load Alleviation for Lightweight, Active Mirrors .......................................................................................... 7557L. Cohan, D. Miller
Modulation Control of Bi-State Adaptive Impedance Device for Active Vibration Suppression ............................. 7569A. Grewal, V. Wickramasinghe, Y. Chen, D. Zimcik
Experiments on a Twelve Mode Membrane Mirror with Boundary Located Electrostatic Actuators .................... 7580L. Robinson, M. Wickersham, U. Korde, B. Fehrman
Multi-Objective Blast Resistant Composite Plate Design Optimization...................................................................... 7590M. Reda Taha, A. Colak-Altunc, G. Cruz, T. Connolly, D. Tortorelli
Topometry Optimization of Plastically Deformable Sheet-Metal Structure with Prescribed Force-Displacement Response for Controlled Energy Absorption......................................................................................... 7602
C. Mozumder, A. Tovar, J. Renaud
Characterizing Material Property Tradeoffs of Polycrystalline Diamond for Design Evaluation and Selection............................................................................................................................................................................ 7619
N. Haddock, C. Mattson
Robust Design Optimization of High Temperature SiC-Si3N4 Nanocomposites ........................................................ 7645G. Mejía-Rodríguez, J. Renaud
Optimization of Blended Composite Wing Panels Using Smeared Stiffness Technique and Lamination Parameters ....................................................................................................................................................................... 7659
D. Liu, V. Toropov, M. Zhou, D. Barton, O. Querin
Diversity and Frame Invariance Characteristics in PSO With and Without Digital Pheromones ........................... 7670V. Kalivarapu, E. Winer
Particle Swarm Optimization for Muli-Objective Collaborative Multidisciplinary Design Optimization .................................................................................................................................................................... 7687
P. Mohammad Zadeh, J. Roshanian, M. Farmani
A Concurrent Subspace Optimization Procedure Based on Multidisciplinary Active Regional Crossover Optimization .................................................................................................................................................. 7698
W. Yao, X. Chen, Q. Ouyang, Y. Wei
Particle Swarm Optimizer for Finocyl Grain Configurations ..................................................................................... 7707A. Kamran, L. Guozhu, Q. Zeeshan, A. Rafique
Star Grain Optimization using Genetic Algorithm....................................................................................................... 7715A. Kamran, L. Guozhu, A. Rafique, S. Naz, Q. Zeeshan
Application of Approximate Unsteady Aerodynamics for Flutter Analysis ............................................................... 7725W. Li, C. Pak
Accuracy of Enriched Multipoint Cubic Approximations for Large-Scale Optimization......................................... 7743R. Roberts, R. Canfield
Setting Targets for Surrogate-Based Optimization ...................................................................................................... 7758N. Queipo, S. Pintos, A. Verde, E. Nava
Statistical Benchmarking of Surrogate-Based and Other Optimization Methods Constrained by Fixed Computational Budget .................................................................................................................................................... 7768
P. Reisenthel, D. Lesieutre
A Framework for Control-Oriented Design Using H∞ Synthesis and Surrogate-Based Optimization ................... 7784S. Bhat, F. Viana, R. Lind, R. Haftka
Why Not Run the Efficient Global Optimization Algorithm with Multiple Surrogates? .......................................... 7800F. Viana, R. Haftka, L. Watson
Handling Uncertainty and Finding Robust Pareto Frontier in Multiobjective Optimization Using Fuzzy Set Theory ............................................................................................................................................................. 7813
T. Erfani, S. Utyuzhnikov
Probabilistic Design of Blast Resistant Composites Using Carbon Nanotubes........................................................... 7820M. Reda Taha, A. Colak-Altunc, J. Kim, M. Al-Haik
Robust Design of Composite Stiffened Panels Under Discrete Source Damage: A Combined Durability-Reliability Evaluation ................................................................................................................................... 7828
F. Rognin, H. Zhang, F. Abdi, K. Nikbin
A Re-Baseline Design Usage Methodology for Vibration and Acoustic Environments Using the F-22A Air Vehicle Operational Spectra .................................................................................................................................... 7841
M. Morton, C. Hampson
Design and Analysis of a Morphing Flap Structure for High Lift Wing..................................................................... 7853N. Di Matteo, S. Guo, S. Ahmed, D. Li
A Composite Wing Structure with a Morphing Leading Edge.................................................................................... 7865R. Morishima, S. Guo, S. Ahmed
Global Local Structural Optimization of Transportation Aircraft Wings ................................................................. 7879P. Ciampa, B. Nagel, M. Tooren
Structural Design of a UAV Wing Using Finite Element Method ............................................................................... 7894F. Mazhar, A. Khan
Modeling Adhesive Progressive Failure in a Single Joint Finite Element................................................................... 7906S. Stapleton, A. Waas, B. Bednarcyk
Progressive Failure Analysis of Composite Pi Joint...................................................................................................... 7922H. Gu, S. Wanthal
Influence of Free-Edge Delamination on the Strength of Composite Joints ............................................................... 7936X. Tan, E. Armanios, S. Johnson, B-S. Wei, R. Haj-Ali
Experimental and Theoretical Studies of the Secondary Bending of the Bonded Composite Butt Joints in Tension ......................................................................................................................................................................... 7953
G. Li, M. Yanishevsky, N. Bellinger, A. Johnston
Design Improvement and Experiment of a Sandwich T-Joint Structure.................................................................... 7976S. Guo, R. Dhande, A. Mills, R. Morishima
Health Monitoring of Composite Structures Using Advanced Diagnostic Systems ................................................... 7986G. Abumeri, F. Rognin, F. Abdi, A. Mosallam, M. Salama, R. Miraj
Frequency Response Function-Based Statistical Damage Identification Applied to Composite Sandwich Plates ............................................................................................................................................................... 7999
J. Oliver, J. Kosmatka
Discrete Wavelet Transforms for Damage Identification in MDOF Structural Systems with Breakable Springs .............................................................................................................................................................................. 8014
M. Elseifi
Frequency-Independent Modal Damping for Flexural Structures via a Viscous “Geometric” Damping Model ................................................................................................................................................................................ 8035
G. Lesieutre
Panel Damping Loss Factor Estimation with the Random Decrement Technique .................................................... 8046M. Ewing, H. Dande
The Effective Dynamic Response Prediction Through Condensation in Damped System ........................................ 8087J. Jeong, S. Baek, M. Cho
Proportional Damping Approximation Using the Peak to Peak Gain......................................................................... 8097C. Sultan
Nonlinear Gust Response of a Control Surface with Free-Play ................................................................................... 8108D. Lee, P. Chen, D. Tang, E. Dowell
Gust Response Alleviation on Flexible Aircraft Using Multi-Surface Control........................................................... 8124S. Ricci, A. Scotti
Fluid-Structure Transient Gust Response Sensitivity for a Nonlinear Joined Wing Model ..................................... 8151D. Wickert, S. Liu, R. Canfield
Aeroelastic Analysis and Gust Response of a Flexible Airfoil...................................................................................... 8170M. Berci, V. Toropov, R. Hewson, P. Gaskell
Thermal-Acoustic Analysis of a Metallic Integrated Thermal Protection System Structure .................................... 8193M. Behnke, A. Sharma, A. Przekop, S. Rizzi
Acoustic Shielding of Rocket Payloads Within Launch Fairings................................................................................. 8207T. Engberg, J. Kizer, U. Korde
A Methodology for Mapping Launch Vehicle Buffet Loads ........................................................................................ 8219J. Schwarz
Mesoscale Energy Dissipation Prediction in Thermal Barrier Ceramic Coatings Under Nonlinear Vibration .......................................................................................................................................................................... 8227
R. Abu Al-Rub, A. Palazotto
An Unique Experimental Device for Evaluating Damping Properties of Thermal Barrier Coatings at Elevated Temperatures ................................................................................................................................................... 8236
O. Easterday, A. Palazotto, R. Branam, W. Baker
Mechanical Characterization of Glasses for Use in Strength Forecasting .................................................................. 8249K. Sutherland, S. D'Agostino
The Mechanical Performance of Subscale Candidate Elastomer Docking Seals........................................................ 8257M. Bastrzyk, C. Daniels
Optical Spectra of Carbon Nanotubes for Stress Measurements of Advanced Aerospace Structures ..................... 8271G. Freihofer, A. Jimenez, S. Raghavan
New Manufacturing Method of Z-Pinned Composite Laminates................................................................................ 8276I. Choi, C. Yeom, I. Hwang, D. Lee, I. Kim
Effect of Carbon Nanotube Growth Conditions on Strength and Stiffness of Carbon and Glass Fiber Polymer Composites ........................................................................................................................................................ 8282
M. Reda Taha, M. Al-Haik, J. Dai, E. Soliman, M. Safdari
Some Recent Advances in Nonlinear Aeroelasticity: Fluid-Structure Interaction in the 21st Century .................... 8294E. Dowell
Model-Based Definition ................................................................................................................................................... 8317C. Briggs, G. Brown, D. Siebenaler, J. Faoro, S. Rowe
Author Index